diff options
170 files changed, 1011 insertions, 16653 deletions
diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX index 8edb9007844e..dea011c8d7c7 100644 --- a/Documentation/arm/00-INDEX +++ b/Documentation/arm/00-INDEX @@ -10,8 +10,6 @@ IXP4xx - Intel IXP4xx Network processor. Makefile - Build sourcefiles as part of the Documentation-build for arm -msm/ - - MSM specific documentation Netwinder - Netwinder specific documentation Porting diff --git a/Documentation/arm/msm/gpiomux.txt b/Documentation/arm/msm/gpiomux.txt deleted file mode 100644 index 67a81620adf6..000000000000 --- a/Documentation/arm/msm/gpiomux.txt +++ /dev/null @@ -1,176 +0,0 @@ -This document provides an overview of the msm_gpiomux interface, which -is used to provide gpio pin multiplexing and configuration on mach-msm -targets. - -History -======= - -The first-generation API for gpio configuration & multiplexing on msm -is the function gpio_tlmm_config(). This function has a few notable -shortcomings, which led to its deprecation and replacement by gpiomux: - -The 'disable' parameter: Setting the second parameter to -gpio_tlmm_config to GPIO_CFG_DISABLE tells the peripheral -processor in charge of the subsystem to perform a look-up into a -low-power table and apply the low-power/sleep setting for the pin. -As the msm family evolved this became problematic. Not all pins -have sleep settings, not all peripheral processors will accept requests -to apply said sleep settings, and not all msm targets have their gpio -subsystems managed by a peripheral processor. In order to get consistent -behavior on all targets, drivers are forced to ignore this parameter, -rendering it useless. - -The 'direction' flag: for all mux-settings other than raw-gpio (0), -the output-enable bit of a gpio is hard-wired to a known -input (usually VDD or ground). For those settings, the direction flag -is meaningless at best, and deceptive at worst. In addition, using the -direction flag to change output-enable (OE) directly can cause trouble in -gpiolib, which has no visibility into gpio direction changes made -in this way. Direction control in gpio mode should be made through gpiolib. - -Key Features of gpiomux -======================= - -- A consistent interface across all generations of msm. Drivers can expect -the same results on every target. -- gpiomux plays nicely with gpiolib. Functions that should belong to gpiolib -are left to gpiolib and not duplicated here. gpiomux is written with the -intent that gpio_chips will call gpiomux reference-counting methods -from their request() and free() hooks, providing full integration. -- Tabular configuration. Instead of having to call gpio_tlmm_config -hundreds of times, gpio configuration is placed in a single table. -- Per-gpio sleep. Each gpio is individually reference counted, allowing only -those lines which are in use to be put in high-power states. -- 0 means 'do nothing': all flags are designed so that the default memset-zero -equates to a sensible default of 'no configuration', preventing users -from having to provide hundreds of 'no-op' configs for unused or -unwanted lines. - -Usage -===== - -To use gpiomux, provide configuration information for relevant gpio lines -in the msm_gpiomux_configs table. Since a 0 equates to "unconfigured", -only those lines to be managed by gpiomux need to be specified. Here -is a completely fictional example: - -struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { - [12] = { - .active = GPIOMUX_VALID | GPIOMUX_DRV_8MA | GPIOMUX_FUNC_1, - .suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN, - }, - [34] = { - .suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN, - }, -}; - -To indicate that a gpio is in use, call msm_gpiomux_get() to increase -its reference count. To decrease the reference count, call msm_gpiomux_put(). - -The effect of this configuration is as follows: - -When the system boots, gpios 12 and 34 will be initialized with their -'suspended' configurations. All other gpios, which were left unconfigured, -will not be touched. - -When msm_gpiomux_get() is called on gpio 12 to raise its reference count -above 0, its active configuration will be applied. Since no other gpio -line has a valid active configuration, msm_gpiomux_get() will have no -effect on any other line. - -When msm_gpiomux_put() is called on gpio 12 or 34 to drop their reference -count to 0, their suspended configurations will be applied. -Since no other gpio line has a valid suspended configuration, no other -gpio line will be effected by msm_gpiomux_put(). Since gpio 34 has no valid -active configuration, this is effectively a no-op for gpio 34 as well, -with one small caveat, see the section "About Output-Enable Settings". - -All of the GPIOMUX_VALID flags may seem like unnecessary overhead, but -they address some important issues. As unused entries (all those -except 12 and 34) are zero-filled, gpiomux needs a way to distinguish -the used fields from the unused. In addition, the all-zero pattern -is a valid configuration! Therefore, gpiomux defines an additional bit -which is used to indicate when a field is used. This has the pleasant -side-effect of allowing calls to msm_gpiomux_write to use '0' to indicate -that a value should not be changed: - - msm_gpiomux_write(0, GPIOMUX_VALID, 0); - -replaces the active configuration of gpio 0 with an all-zero configuration, -but leaves the suspended configuration as it was. - -Static Configurations -===================== - -To install a static configuration, which is applied at boot and does -not change after that, install a configuration with a suspended component -but no active component, as in the previous example: - - [34] = { - .suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN, - }, - -The suspended setting is applied during boot, and the lack of any valid -active setting prevents any other setting from being applied at runtime. -If other subsystems attempting to access the line is a concern, one could -*really* anchor the configuration down by calling msm_gpiomux_get on the -line at initialization to move the line into active mode. With the line -held, it will never be re-suspended, and with no valid active configuration, -no new configurations will be applied. - -But then, if having other subsystems grabbing for the line is truly a concern, -it should be reserved with gpio_request instead, which carries an implicit -msm_gpiomux_get. - -gpiomux and gpiolib -=================== - -It is expected that msm gpio_chips will call msm_gpiomux_get() and -msm_gpiomux_put() from their request and free hooks, like this fictional -example: - -static int request(struct gpio_chip *chip, unsigned offset) -{ - return msm_gpiomux_get(chip->base + offset); -} - -static void free(struct gpio_chip *chip, unsigned offset) -{ - msm_gpiomux_put(chip->base + offset); -} - - ...somewhere in a gpio_chip declaration... - .request = request, - .free = free, - -This provides important functionality: -- It guarantees that a gpio line will have its 'active' config applied - when the line is requested, and will not be suspended while the line - remains requested; and -- It guarantees that gpio-direction settings from gpiolib behave sensibly. - See "About Output-Enable Settings." - -This mechanism allows for "auto-request" of gpiomux lines via gpiolib -when it is suitable. Drivers wishing more exact control are, of course, -free to also use msm_gpiomux_set and msm_gpiomux_get. - -About Output-Enable Settings -============================ - -Some msm targets do not have the ability to query the current gpio -configuration setting. This means that changes made to the output-enable -(OE) bit by gpiolib cannot be consistently detected and preserved by gpiomux. -Therefore, when gpiomux applies a configuration setting, any direction -settings which may have been applied by gpiolib are lost and the default -input settings are re-applied. - -For this reason, drivers should not assume that gpio direction settings -continue to hold if they free and then re-request a gpio. This seems like -common sense - after all, anybody could have obtained the line in the -meantime - but it needs saying. - -This also means that calls to msm_gpiomux_write will reset the OE bit, -which means that if the gpio line is held by a client of gpiolib and -msm_gpiomux_write is called, the direction setting has been lost and -gpiolib's internal state has been broken. -Release gpio lines before reconfiguring them. diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt index a6391e70a8fd..90787aa2e648 100644 --- a/Documentation/devicetree/bindings/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -1,9 +1,10 @@ * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) Required properties: -- compatible: Should be "atmel,<chip>-usart" +- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu" The compatible <chip> indicated will be the first SoC to support an additional mode or an USART new feature. + For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart" - reg: Should contain registers location and length - interrupts: Should contain interrupt - clock-names: tuple listing input clock names. diff --git a/MAINTAINERS b/MAINTAINERS index 8e9ecbe6ebb5..9988e1a14f50 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1261,22 +1261,6 @@ L: openmoko-kernel@lists.openmoko.org (subscribers-only) W: http://wiki.openmoko.org/wiki/Neo_FreeRunner S: Supported -ARM/QUALCOMM MSM MACHINE SUPPORT -M: David Brown <davidb@codeaurora.org> -M: Daniel Walker <dwalker@fifo99.com> -M: Bryan Huntsman <bryanh@codeaurora.org> -L: linux-arm-msm@vger.kernel.org -F: arch/arm/mach-msm/ -F: drivers/video/fbdev/msm/ -F: drivers/mmc/host/msm_sdcc.c -F: drivers/mmc/host/msm_sdcc.h -F: drivers/tty/serial/msm_serial.h -F: drivers/tty/serial/msm_serial.c -F: drivers/*/pm8???-* -F: drivers/mfd/ssbi.c -T: git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git -S: Maintained - ARM/TOSA MACHINE SUPPORT M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> M: Dirk Opfer <dirk@opfer-online.de> @@ -1334,6 +1318,10 @@ L: linux-soc@vger.kernel.org S: Maintained F: arch/arm/mach-qcom/ F: drivers/soc/qcom/ +F: drivers/tty/serial/msm_serial.h +F: drivers/tty/serial/msm_serial.c +F: drivers/*/pm8???-* +F: drivers/mfd/ssbi.c T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git ARM/RADISYS ENP2611 MACHINE SUPPORT diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 392e7ae69452..c8baa96ed748 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -367,9 +367,9 @@ config ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select IRQ_DOMAIN - select NEED_MACH_IO_H if PCCARD select PINCTRL select PINCTRL_AT91 + select SOC_BUS select USE_OF help This enables support for systems based on Atmel @@ -632,18 +632,6 @@ config ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_MSM - bool "Qualcomm MSM (non-multiplatform)" - select ARCH_REQUIRE_GPIOLIB - select COMMON_CLK - select GENERIC_CLOCKEVENTS - help - Support for Qualcomm MSM/QSD based systems. This runs on the - apps processor of the MSM/QSD and depends on a shared memory - interface to the modem processor which runs the baseband - stack and controls some vital subsystems - (clock and power control, etc). - config ARCH_SHMOBILE_LEGACY bool "Renesas ARM SoCs (non-multiplatform)" select ARCH_SHMOBILE @@ -897,8 +885,6 @@ source "arch/arm/mach-ks8695/Kconfig" source "arch/arm/mach-meson/Kconfig" -source "arch/arm/mach-msm/Kconfig" - source "arch/arm/mach-moxart/Kconfig" source "arch/arm/mach-mv78xx0/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 8b0183a9a300..4cfb4b8fc2dd 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -448,25 +448,6 @@ choice Say Y here if you want kernel low-level debugging support on MMP UART3. - config DEBUG_MSM_UART - bool "Kernel low-level debugging messages via MSM UART" - depends on ARCH_MSM - help - Say Y here if you want the debug print routines to direct - their output to the serial port on MSM devices. - - ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT # - MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1 - MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2 - MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3 - - MSM7X30 0xaca00000 0xe1000000 UART1 - MSM7X30 0xacb00000 0xe1000000 UART2 - MSM7X30 0xacc00000 0xe1000000 UART3 - - Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration - options based on your needs. - config DEBUG_QCOM_UARTDM bool "Kernel low-level debugging messages via QCOM UARTDM" depends on ARCH_QCOM @@ -806,7 +787,7 @@ choice via SCIF2 on Renesas R-Car H1 (R8A7779). config DEBUG_RCAR_GEN2_SCIF0 - bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793)" + bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793" depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793 help Say Y here if you want kernel low-level debugging support @@ -1295,7 +1276,7 @@ config DEBUG_LL_INCLUDE DEBUG_IMX6SL_UART || \ DEBUG_IMX6SX_UART default "debug/ks8695.S" if DEBUG_KS8695_UART - default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM + default "debug/msm.S" if DEBUG_QCOM_UARTDM default "debug/netx.S" if DEBUG_NETX_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2 @@ -1388,7 +1369,6 @@ config DEBUG_UART_PHYS default 0x80230000 if DEBUG_PICOXCELL_UART default 0x808c0000 if ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART - default 0xa9a00000 if DEBUG_MSM_UART default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1 default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX default 0xc0013000 if DEBUG_U300_UART @@ -1433,7 +1413,7 @@ config DEBUG_UART_PHYS DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_EFM32 || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_MSM_UART || DEBUG_NETX_UART || \ + DEBUG_NETX_UART || \ DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \ DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \ @@ -1446,7 +1426,6 @@ config DEBUG_UART_VIRT hex "Virtual base address of debug UART" default 0xe0000a00 if DEBUG_NETX_UART default 0xe0010fe0 if ARCH_RPC - default 0xe1000000 if DEBUG_MSM_UART default 0xf0000be0 if ARCH_EBSA110 default 0xf0010000 if DEBUG_ASM9260_UART default 0xf01fb000 if DEBUG_NOMADIK_UART @@ -1526,7 +1505,7 @@ config DEBUG_UART_VIRT default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_MSM_UART || DEBUG_NETX_UART || \ + DEBUG_NETX_UART || \ DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 @@ -1556,7 +1535,7 @@ config DEBUG_UART_8250_FLOW_CONTROL config DEBUG_UNCOMPRESS bool - depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG + depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) help diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 5575d9fa8806..cced41d40ce2 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -136,7 +136,6 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000 ifeq ($(CONFIG_ARCH_SA1100),y) textofs-$(CONFIG_SA1111) := 0x00208000 endif -textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 @@ -171,7 +170,6 @@ machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx machine-$(CONFIG_ARCH_MESON) += meson machine-$(CONFIG_ARCH_MMP) += mmp machine-$(CONFIG_ARCH_MOXART) += moxart -machine-$(CONFIG_ARCH_MSM) += msm machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0 machine-$(CONFIG_ARCH_MVEBU) += mvebu machine-$(CONFIG_ARCH_MXC) += imx diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 21c2b504f977..c515e4b160be 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -830,7 +830,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91rm9200-usart"; + compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 62d25b14deb8..d88fe62a2b2e 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -753,7 +753,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index d55fdf2487ef..bf8d1856a55a 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -276,7 +276,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index e4f61a979a57..111889b556cf 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -762,7 +762,7 @@ }; dbgu: serial@ffffee00 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 8ec05b11298a..70e59c5ceb2f 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -893,7 +893,7 @@ }; dbgu: serial@ffffee00 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 0c53a375ba99..ea0af0f6ec7d 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -757,7 +757,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 40f645b8fe25..ebfd5ce9cb38 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -377,7 +377,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index d221179d0f1a..3aa56ae3410a 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -860,7 +860,7 @@ }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 367af53c1b84..c0a8dfcf8380 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -439,7 +439,7 @@ }; dbgu: serial@ffffee00 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>, diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 4303874889c6..782587df5f3f 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1064,7 +1064,7 @@ }; dbgu: serial@fc069000 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfc069000 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index e6b0007355f8..af07e058ba11 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -24,9 +24,8 @@ CONFIG_ARCH_MXC=y CONFIG_MACH_SCB9328=y CONFIG_MACH_APF9328=y CONFIG_MACH_MX21ADS=y -CONFIG_MACH_MX25_3DS=y CONFIG_MACH_EUKREA_CPUIMX25SD=y -CONFIG_MACH_IMX25_DT=y +CONFIG_SOC_IMX25=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_MX27_3DS=y CONFIG_MACH_IMX27_VISSTRIM_M10=y diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig deleted file mode 100644 index dd18c9e527d6..000000000000 --- a/arch/arm/configs/msm_defconfig +++ /dev/null @@ -1,121 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS_ALL=y -CONFIG_EMBEDDED=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_ARCH_MSM=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y -CONFIG_CLEANCACHE=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_VFP=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_CFG80211=y -CONFIG_RFKILL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_CHR_DEV_SCH=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_SLIP=y -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_MODE_SLIP6=y -CONFIG_USB_USBNET=y -# CONFIG_USB_NET_AX8817X is not set -# CONFIG_USB_NET_ZAURUS is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_MOUSE_PS2 is not set -CONFIG_INPUT_JOYSTICK=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_MSM=y -CONFIG_SERIAL_MSM_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_DEBUG_GPIO=y -CONFIG_GPIO_SYSFS=y -CONFIG_THERMAL=y -CONFIG_REGULATOR=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_FB=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_DYNAMIC_MINORS=y -# CONFIG_SND_ARM is not set -# CONFIG_SND_SPI is not set -# CONFIG_SND_USB is not set -CONFIG_SND_SOC=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_ACM=y -CONFIG_USB_SERIAL=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_GADGET_VBUS_DRAW=500 -CONFIG_RTC_CLASS=y -CONFIG_STAGING=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_EXT4_FS=y -CONFIG_FUSE_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_CIFS=y -CONFIG_PRINTK_TIME=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_DEBUG_INFO=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOCKUP_DETECTOR=y -# CONFIG_DETECT_HUNG_TASK is not set -# CONFIG_SCHED_DEBUG is not set -CONFIG_TIMER_STATS=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 9d56781a8f80..f69a459f4f92 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -13,7 +13,7 @@ CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y CONFIG_MACH_NETXBIG=y CONFIG_ARCH_MXC=y -CONFIG_MACH_IMX25_DT=y +CONFIG_SOC_IMX25=y CONFIG_MACH_IMX27_DT=y CONFIG_ARCH_U300=y CONFIG_PCI_MVEBU=y diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S index e55a9426b496..b03024fa671f 100644 --- a/arch/arm/include/debug/msm.S +++ b/arch/arm/include/debug/msm.S @@ -16,24 +16,17 @@ */ .macro addruart, rp, rv, tmp -#ifdef CONFIG_DEBUG_UART_PHYS ldr \rp, =CONFIG_DEBUG_UART_PHYS ldr \rv, =CONFIG_DEBUG_UART_VIRT -#endif .endm .macro senduart, rd, rx ARM_BE8(rev \rd, \rd ) -#ifdef CONFIG_DEBUG_QCOM_UARTDM @ Write the 1 character to UARTDM_TF str \rd, [\rx, #0x70] -#else - str \rd, [\rx, #0x0C] -#endif .endm .macro waituart, rd, rx -#ifdef CONFIG_DEBUG_QCOM_UARTDM @ check for TX_EMT in UARTDM_SR ldr \rd, [\rx, #0x08] ARM_BE8(rev \rd, \rd ) @@ -55,13 +48,6 @@ ARM_BE8(rev \rd, \rd ) str \rd, [\rx, #0x40] @ UARTDM reg. Read to induce delay ldr \rd, [\rx, #0x08] -#else - @ wait for TX_READY -1001: ldr \rd, [\rx, #0x08] -ARM_BE8(rev \rd, \rd ) - tst \rd, #0x04 - beq 1001b -#endif .endm .macro busyuart, rd, rx diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index c74a44324e5b..4da6bae047f3 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -24,7 +24,7 @@ config SOC_SAMA5 select GENERIC_CLOCKEVENTS select MEMORY select ATMEL_SDRAMC - select PHYLIB if NETDEVICES + select SRAM if PM menu "Atmel AT91 System-on-Chip" @@ -81,6 +81,8 @@ config SOC_AT91RM9200 select CPU_ARM920T select GENERIC_CLOCKEVENTS select HAVE_AT91_USB_CLK + select MIGHT_HAVE_PCI + select SRAM if PM config SOC_AT91SAM9 bool "AT91SAM9" @@ -94,6 +96,7 @@ config SOC_AT91SAM9 select HAVE_AT91_UTMI select HAVE_FB_ATMEL select MEMORY + select SRAM if PM help Select this if you are using one of those Atmel SoC: AT91SAM9260 @@ -116,20 +119,6 @@ endif # SOC_SAM_V4_V5 comment "AT91 Feature Selections" -config AT91_SLOW_CLOCK - bool "Suspend-to-RAM disables main oscillator" - select SRAM - depends on SUSPEND - help - Select this if you want Suspend-to-RAM to save the most power - possible (without powering off the CPU) by disabling the PLLs - and main oscillator so that only the 32 KiHz clock is available. - - When only that slow-clock is available, some peripherals lose - functionality. Many can't issue wakeup events unless faster - clocks are available. Some lose their operating state and - need to be completely re-initialized. - config AT91_TIMER_HZ int "Kernel HZ (jiffies per second)" range 32 1024 diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 827fdbcce1c7..ea54c9824d89 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := setup.o +obj-y := soc.o obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o @@ -13,7 +13,7 @@ obj-$(CONFIG_SOC_SAMA5) += sama5.o # Power Management obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o +obj-$(CONFIG_PM) += pm_suspend.o ifeq ($(CONFIG_PM_DEBUG),y) CFLAGS_pm.o += -DDEBUG diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 8fcfb70f7124..bfc9aed90b91 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -8,25 +8,22 @@ * Licensed under GPLv2 or later. */ -#include <linux/types.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/gpio.h> +#include <linux/clk-provider.h> #include <linux/of.h> -#include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/clk-provider.h> -#include <asm/setup.h> -#include <asm/irq.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> #include <asm/system_misc.h> #include <mach/at91_st.h> #include "generic.h" +#include "soc.h" + +static const struct at91_soc rm9200_socs[] = { + AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"), + { /* sentinel */ }, +}; static void at91rm9200_restart(enum reboot_mode reboot_mode, const char *cmd) { @@ -45,15 +42,20 @@ static void __init at91rm9200_dt_timer_init(void) static void __init at91rm9200_dt_device_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + struct soc_device *soc; + struct device *soc_dev = NULL; + + soc = at91_soc_init(rm9200_socs); + if (soc != NULL) + soc_dev = soc_device_to_device(soc); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); arm_pm_idle = at91rm9200_idle; arm_pm_restart = at91rm9200_restart; at91rm9200_pm_init(); } - - static const char *at91rm9200_dt_board_compat[] __initconst = { "atmel,at91rm9200", NULL @@ -61,7 +63,6 @@ static const char *at91rm9200_dt_board_compat[] __initconst = { DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200") .init_time = at91rm9200_dt_timer_init, - .map_io = at91_map_io, .init_machine = at91rm9200_dt_device_init, .dt_compat = at91rm9200_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c index 56e3ba73ec40..e47a2093a0e7 100644 --- a/arch/arm/mach-at91/at91sam9.c +++ b/arch/arm/mach-at91/at91sam9.c @@ -7,29 +7,68 @@ * Licensed under GPLv2 or later. */ -#include <linux/types.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/gpio.h> #include <linux/of.h> -#include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/clk-provider.h> -#include <asm/system_misc.h> -#include <asm/setup.h> -#include <asm/irq.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> +#include <asm/system_misc.h> #include "generic.h" +#include "soc.h" -static void __init at91sam9_dt_device_init(void) +static const struct at91_soc at91sam9_socs[] = { + AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL), + AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL), + AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL), + AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL), + AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL), + AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH, + "at91sam9m11", "at91sam9g45"), + AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH, + "at91sam9m10", "at91sam9g45"), + AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH, + "at91sam9g46", "at91sam9g45"), + AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH, + "at91sam9g45", "at91sam9g45"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH, + "at91sam9g15", "at91sam9x5"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH, + "at91sam9g35", "at91sam9x5"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH, + "at91sam9x35", "at91sam9x5"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH, + "at91sam9g25", "at91sam9x5"), + AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH, + "at91sam9x25", "at91sam9x5"), + AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH, + "at91sam9cn12", "at91sam9n12"), + AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH, + "at91sam9n12", "at91sam9n12"), + AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH, + "at91sam9cn11", "at91sam9n12"), + AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"), + AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"), + AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"), + { /* sentinel */ }, +}; + +static void __init at91sam9_common_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + struct soc_device *soc; + struct device *soc_dev = NULL; + + soc = at91_soc_init(at91sam9_socs); + if (soc != NULL) + soc_dev = soc_device_to_device(soc); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); arm_pm_idle = at91sam9_idle; +} + +static void __init at91sam9_dt_device_init(void) +{ + at91sam9_common_init(); at91sam9260_pm_init(); } @@ -40,16 +79,13 @@ static const char *at91_dt_board_compat[] __initconst = { DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9") /* Maintainer: Atmel */ - .map_io = at91_map_io, .init_machine = at91sam9_dt_device_init, .dt_compat = at91_dt_board_compat, MACHINE_END static void __init at91sam9g45_dt_device_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - - arm_pm_idle = at91sam9_idle; + at91sam9_common_init(); at91sam9g45_pm_init(); } @@ -60,16 +96,13 @@ static const char *at91sam9g45_board_compat[] __initconst = { DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45") /* Maintainer: Atmel */ - .map_io = at91_map_io, .init_machine = at91sam9g45_dt_device_init, .dt_compat = at91sam9g45_board_compat, MACHINE_END static void __init at91sam9x5_dt_device_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - - arm_pm_idle = at91sam9_idle; + at91sam9_common_init(); at91sam9x5_pm_init(); } @@ -81,7 +114,6 @@ static const char *at91sam9x5_board_compat[] __initconst = { DT_MACHINE_START(at91sam9x5_dt, "Atmel AT91SAM9") /* Maintainer: Atmel */ - .map_io = at91_map_io, .init_machine = at91sam9x5_dt_device_init, .dt_compat = at91sam9x5_board_compat, MACHINE_END diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 583369ffc284..2b396c4e1fc1 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -25,10 +25,6 @@ extern void at91rm9200_timer_init(void); extern void at91rm9200_idle(void); extern void at91sam9_idle(void); -/* Matrix */ -extern void at91_ioremap_matrix(u32 base_addr); - - #ifdef CONFIG_PM extern void __init at91rm9200_pm_init(void); extern void __init at91sam9260_pm_init(void); diff --git a/arch/arm/mach-at91/include/mach/at91_matrix.h b/arch/arm/mach-at91/include/mach/at91_matrix.h deleted file mode 100644 index f8996c954131..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_matrix.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Under GPLv2 - */ - -#ifndef __MACH_AT91_MATRIX_H__ -#define __MACH_AT91_MATRIX_H__ - -#ifndef __ASSEMBLY__ -extern void __iomem *at91_matrix_base; - -#define at91_matrix_read(field) \ - __raw_readl(at91_matrix_base + field) - -#define at91_matrix_write(field, value) \ - __raw_writel(value, at91_matrix_base + field) - -#else -.extern at91_matrix_base -#endif - -#endif /* __MACH_AT91_MATRIX_H__ */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h deleted file mode 100644 index f459df420629..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h - * - * Copyright (C) 2007 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9260 datasheet revision B. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9260_MATRIX_H -#define AT91SAM9260_MATRIX_H - -#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ - -#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_EBICSA 0x11C /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h deleted file mode 100644 index a50cdf8b8ca4..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h - * - * Copyright (C) 2007 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9261_MATRIX_H -#define AT91SAM9261_MATRIX_H - -#define AT91_MATRIX_MCFG 0x00 /* Master Configuration Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_SCFG0 0x04 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x08 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x0C /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x10 /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x14 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ - -#define AT91_MATRIX_TCR 0x24 /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_ITCM_64 (7 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) - -#define AT91_MATRIX_EBICSA 0x30 /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ - -#define AT91_MATRIX_USBPUCR 0x34 /* USB Pad Pull-Up Control Register */ -#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h deleted file mode 100644 index ebb5fdb565e0..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9263_matrix.h - * - * Copyright (C) 2006 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9263 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9263_MATRIX_H -#define AT91SAM9263_MATRIX_H - -#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) - -#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) - -#define AT91_MATRIX_EBI0CSA 0x120 /* EBI0 Chip Select Assignment Register */ -#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16) - -#define AT91_MATRIX_EBI1CSA 0x124 /* EBI1 Chip Select Assignment Register */ -#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3) -#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16) - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h deleted file mode 100644 index b76e2ed2fbc2..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * Matrix-centric header file for the AT91SAM9G45 family - * - * Copyright (C) 2008-2009 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9G45 preliminary datasheet. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9G45_MATRIX_H -#define AT91SAM9G45_MATRIX_H - -#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */ -#define AT91_MATRIX_MCFG9 0x24 /* Master Configuration Register 9 */ -#define AT91_MATRIX_MCFG10 0x28 /* Master Configuration Register 10 */ -#define AT91_MATRIX_MCFG11 0x2C /* Master Configuration Register 11 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) -#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0) -#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0) -#define AT91_MATRIX_ULBT_128 (7 << 0) - -#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ - -#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ -#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ -#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ -#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) -#define AT91_MATRIX_RCB9 (1 << 9) -#define AT91_MATRIX_RCB10 (1 << 10) -#define AT91_MATRIX_RCB11 (1 << 11) - -#define AT91_MATRIX_TCMR 0x110 /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) -#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */ -#define AT91_MATRIX_TCM_NO_WS (0x0 << 11) -#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11) - -#define AT91_MATRIX_VIDEO 0x118 /* Video Mode Configuration Register */ -#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */ -#define AT91C_VDEC_SEL_OFF (0 << 0) -#define AT91C_VDEC_SEL_ON (1 << 0) - -#define AT91_MATRIX_EBICSA 0x128 /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4) -#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) -#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) -#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ -#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) -#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) -#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ -#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) -#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) - -#define AT91_MATRIX_WPMR 0x1E4 /* Write Protect Mode Register */ -#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ -#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) -#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) -#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ - -#define AT91_MATRIX_WPSR 0x1E8 /* Write Protect Status Register */ -#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ -#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) -#define AT91_MATRIX_WPSR_WPV (1 << 0) -#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h deleted file mode 100644 index 40060cd62fa9..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Matrix-centric header file for the AT91SAM9N12 - * - * Copyright (C) 2012 Atmel Corporation. - * - * Only EBI related registers. - * Write Protect register definitions may be useful. - * - * Licensed under GPLv2 or later. - */ - -#ifndef _AT91SAM9N12_MATRIX_H_ -#define _AT91SAM9N12_MATRIX_H_ - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x118) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) -#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) -#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ -#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) -#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) -#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ -#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) -#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) -#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */ -#define AT91_MATRIX_NFD0_ON_D0 (0 << 24) -#define AT91_MATRIX_NFD0_ON_D16 (1 << 24) -#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */ -#define AT91_MATRIX_MP_OFF (0 << 25) -#define AT91_MATRIX_MP_ON (1 << 25) - -#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ -#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ -#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) -#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) -#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ - -#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ -#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ -#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) -#define AT91_MATRIX_WPSR_WPV (1 << 0) -#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h deleted file mode 100644 index 6d160adadafc..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h - * - * Copyright (C) 2007 Atmel Corporation - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9RL datasheet revision A. (Preliminary) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#ifndef AT91SAM9RL_MATRIX_H -#define AT91SAM9RL_MATRIX_H - -#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ - -#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) - -#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) - -#define AT91_MATRIX_EBICSA 0x120 /* EBI0 Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h deleted file mode 100644 index a606d3966470..000000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Matrix-centric header file for the AT91SAM9x5 family - * - * Copyright (C) 2009-2012 Atmel Corporation. - * - * Only EBI related registers. - * Write Protect register definitions may be useful. - * - * Licensed under GPLv2 or later. - */ - -#ifndef AT91SAM9X5_MATRIX_H -#define AT91SAM9X5_MATRIX_H - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) -#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) -#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ -#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) -#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) -#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ -#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) -#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) -#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */ -#define AT91_MATRIX_NFD0_ON_D0 (0 << 24) -#define AT91_MATRIX_NFD0_ON_D16 (1 << 24) -#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */ -#define AT91_MATRIX_MP_OFF (0 << 25) -#define AT91_MATRIX_MP_ON (1 << 25) - -#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ -#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ -#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) -#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) -#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ - -#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ -#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ -#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) -#define AT91_MATRIX_WPSR_WPV (1 << 0) -#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h deleted file mode 100644 index 2d9ca0455745..000000000000 --- a/arch/arm/mach-at91/include/mach/io.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/io.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xFFFFFFFF -#define __io(a) __typesafe_io(a) - -#endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index aa4116e9452f..ac947cdd506c 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -29,6 +29,8 @@ #include <linux/atomic.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> +#include <asm/fncpy.h> +#include <asm/cacheflush.h> #include <mach/cpu.h> #include <mach/hardware.h> @@ -41,7 +43,6 @@ static struct { int memctrl; } at91_pm_data; -static void (*at91_pm_standby)(void); void __iomem *at91_ramc_base[2]; static int at91_pm_valid_state(suspend_state_t state) @@ -119,76 +120,67 @@ int at91_suspend_entering_slow_clock(void) } EXPORT_SYMBOL(at91_suspend_entering_slow_clock); - -static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0, +static void (*at91_suspend_sram_fn)(void __iomem *pmc, void __iomem *ramc0, void __iomem *ramc1, int memctrl); -#ifdef CONFIG_AT91_SLOW_CLOCK -extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0, +extern void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *ramc0, void __iomem *ramc1, int memctrl); -extern u32 at91_slow_clock_sz; -#endif +extern u32 at91_pm_suspend_in_sram_sz; + +static void at91_pm_suspend(suspend_state_t state) +{ + unsigned int pm_data = at91_pm_data.memctrl; + + pm_data |= (state == PM_SUSPEND_MEM) ? + AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0; + + flush_cache_all(); + outer_disable(); + + at91_suspend_sram_fn(at91_pmc_base, at91_ramc_base[0], + at91_ramc_base[1], pm_data); + + outer_resume(); +} static int at91_pm_enter(suspend_state_t state) { at91_pinctrl_gpio_suspend(); switch (state) { + /* + * Suspend-to-RAM is like STANDBY plus slow clock mode, so + * drivers must suspend more deeply, the master clock switches + * to the clk32k and turns off the main oscillator + */ + case PM_SUSPEND_MEM: /* - * Suspend-to-RAM is like STANDBY plus slow clock mode, so - * drivers must suspend more deeply: only the master clock - * controller may be using the main oscillator. + * Ensure that clocks are in a valid state. */ - case PM_SUSPEND_MEM: - /* - * Ensure that clocks are in a valid state. - */ - if (!at91_pm_verify_clocks()) - goto error; - - /* - * Enter slow clock mode by switching over to clk32k and - * turning off the main oscillator; reverse on wakeup. - */ - if (slow_clock) { -#ifdef CONFIG_AT91_SLOW_CLOCK - /* copy slow_clock handler to SRAM, and call it */ - memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz); -#endif - slow_clock(at91_pmc_base, at91_ramc_base[0], - at91_ramc_base[1], - at91_pm_data.memctrl); - break; - } else { - pr_info("AT91: PM - no slow clock mode enabled ...\n"); - /* FALLTHROUGH leaving master clock alone */ - } + if (!at91_pm_verify_clocks()) + goto error; - /* - * STANDBY mode has *all* drivers suspended; ignores irqs not - * marked as 'wakeup' event sources; and reduces DRAM power. - * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and - * nothing fancy done with main or cpu clocks. - */ - case PM_SUSPEND_STANDBY: - /* - * NOTE: the Wait-for-Interrupt instruction needs to be - * in icache so no SDRAM accesses are needed until the - * wakeup IRQ occurs and self-refresh is terminated. - * For ARM 926 based chips, this requirement is weaker - * as at91sam9 can access a RAM in self-refresh mode. - */ - if (at91_pm_standby) - at91_pm_standby(); - break; + at91_pm_suspend(state); - case PM_SUSPEND_ON: - cpu_do_idle(); - break; + break; - default: - pr_debug("AT91: PM - bogus suspend state %d\n", state); - goto error; + /* + * STANDBY mode has *all* drivers suspended; ignores irqs not + * marked as 'wakeup' event sources; and reduces DRAM power. + * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and + * nothing fancy done with main or cpu clocks. + */ + case PM_SUSPEND_STANDBY: + at91_pm_suspend(state); + break; + + case PM_SUSPEND_ON: + cpu_do_idle(); + break; + + default: + pr_debug("AT91: PM - bogus suspend state %d\n", state); + goto error; } error: @@ -218,12 +210,10 @@ static struct platform_device at91_cpuidle_device = { .name = "cpuidle-at91", }; -void at91_pm_set_standby(void (*at91_standby)(void)) +static void at91_pm_set_standby(void (*at91_standby)(void)) { - if (at91_standby) { + if (at91_standby) at91_cpuidle_device.dev.platform_data = at91_standby; - at91_pm_standby = at91_standby; - } } static const struct of_device_id ramc_ids[] __initconst = { @@ -263,7 +253,6 @@ static __init void at91_dt_ramc(void) at91_pm_set_standby(standby); } -#ifdef CONFIG_AT91_SLOW_CLOCK static void __init at91_pm_sram_init(void) { struct gen_pool *sram_pool; @@ -291,30 +280,36 @@ static void __init at91_pm_sram_init(void) return; } - sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz); + sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz); if (!sram_base) { - pr_warn("%s: unable to alloc ocram!\n", __func__); + pr_warn("%s: unable to alloc sram!\n", __func__); return; } sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base); - slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false); -} -#endif + at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase, + at91_pm_suspend_in_sram_sz, false); + if (!at91_suspend_sram_fn) { + pr_warn("SRAM: Could not map\n"); + return; + } + /* Copy the pm suspend handler to SRAM */ + at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn, + &at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz); +} static void __init at91_pm_init(void) { -#ifdef CONFIG_AT91_SLOW_CLOCK at91_pm_sram_init(); -#endif - - pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : "")); if (at91_cpuidle_device.dev.platform_data) platform_device_register(&at91_cpuidle_device); - suspend_set_ops(&at91_pm_ops); + if (at91_suspend_sram_fn) + suspend_set_ops(&at91_pm_ops); + else + pr_info("AT91: PM not supported, due to no SRAM allocated\n"); } void __init at91rm9200_pm_init(void) diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 86c0aa819d25..dcacfa1ad3fa 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -15,11 +15,13 @@ #include <mach/at91_ramc.h> -#ifdef CONFIG_PM -extern void at91_pm_set_standby(void (*at91_standby)(void)); -#else -static inline void at91_pm_set_standby(void (*at91_standby)(void)) { } -#endif +#define AT91_PM_MEMTYPE_MASK 0x0f + +#define AT91_PM_MODE_OFFSET 4 +#define AT91_PM_MODE_MASK 0x01 +#define AT91_PM_MODE(x) (((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET) + +#define AT91_PM_SLOW_CLOCK 0x01 /* * The AT91RM9200 goes into self-refresh mode with this command, and will @@ -31,6 +33,7 @@ static inline void at91_pm_set_standby(void (*at91_standby)(void)) { } * still in self-refresh is "not recommended", but seems to work. */ +#ifndef __ASSEMBLY__ static inline void at91rm9200_standby(void) { u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR); @@ -112,3 +115,4 @@ static inline void at91sam9_sdram_standby(void) } #endif +#endif diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S deleted file mode 100644 index 931f0e302c03..000000000000 --- a/arch/arm/mach-at91/pm_slowclock.S +++ /dev/null @@ -1,335 +0,0 @@ -/* - * arch/arm/mach-at91/pm_slow_clock.S - * - * Copyright (C) 2006 Savin Zlobec - * - * AT91SAM9 support: - * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/linkage.h> -#include <linux/clk/at91_pmc.h> -#include <mach/hardware.h> -#include <mach/at91_ramc.h> - -/* - * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master - * clock during suspend by adjusting its prescalar and divisor. - * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there - * are errata regarding adjusting the prescalar and divisor. - */ -#undef SLOWDOWN_MASTER_CLOCK - -pmc .req r0 -sdramc .req r1 -ramc1 .req r2 -memctrl .req r3 -tmp1 .req r4 -tmp2 .req r5 - -/* - * Wait until master clock is ready (after switching master clock source) - */ - .macro wait_mckrdy -1: ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_MCKRDY - beq 1b - .endm - -/* - * Wait until master oscillator has stabilized. - */ - .macro wait_moscrdy -1: ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_MOSCS - beq 1b - .endm - -/* - * Wait until PLLA has locked. - */ - .macro wait_pllalock -1: ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_LOCKA - beq 1b - .endm - -/* - * Wait until PLLB has locked. - */ - .macro wait_pllblock -1: ldr tmp1, [pmc, #AT91_PMC_SR] - tst tmp1, #AT91_PMC_LOCKB - beq 1b - .endm - - .text - - .arm - -/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc, - * void __iomem *ramc1, int memctrl) - */ -ENTRY(at91_slow_clock) - /* Save registers on stack */ - stmfd sp!, {r4 - r12, lr} - - /* - * Register usage: - * R0 = Base address of AT91_PMC - * R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS) - * R2 = Base address of second RAM Controller or 0 if not present - * R3 = Memory controller - * R4 = temporary register - * R5 = temporary register - */ - - /* Drain write buffer */ - mov tmp1, #0 - mcr p15, 0, tmp1, c7, c10, 4 - - cmp memctrl, #AT91_MEMCTRL_MC - bne ddr_sr_enable - - /* - * at91rm9200 Memory controller - */ - /* Put SDRAM in self-refresh mode */ - mov tmp1, #1 - str tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR] - b sdr_sr_done - - /* - * DDRSDR Memory controller - */ -ddr_sr_enable: - cmp memctrl, #AT91_MEMCTRL_DDRSDR - bne sdr_sr_enable - - /* LPDDR1 --> force DDR2 mode during self-refresh */ - ldr tmp1, [sdramc, #AT91_DDRSDRC_MDR] - str tmp1, .saved_sam9_mdr - bic tmp1, tmp1, #~AT91_DDRSDRC_MD - cmp tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR - ldreq tmp1, [sdramc, #AT91_DDRSDRC_MDR] - biceq tmp1, tmp1, #AT91_DDRSDRC_MD - orreq tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2 - streq tmp1, [sdramc, #AT91_DDRSDRC_MDR] - - /* prepare for DDRAM self-refresh mode */ - ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR] - str tmp1, .saved_sam9_lpr - bic tmp1, #AT91_DDRSDRC_LPCB - orr tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH - - /* figure out if we use the second ram controller */ - cmp ramc1, #0 - beq ddr_no_2nd_ctrl - - ldr tmp2, [ramc1, #AT91_DDRSDRC_MDR] - str tmp2, .saved_sam9_mdr1 - bic tmp2, tmp2, #~AT91_DDRSDRC_MD - cmp tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR - ldreq tmp2, [ramc1, #AT91_DDRSDRC_MDR] - biceq tmp2, tmp2, #AT91_DDRSDRC_MD - orreq tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2 - streq tmp2, [ramc1, #AT91_DDRSDRC_MDR] - - ldr tmp2, [ramc1, #AT91_DDRSDRC_LPR] - str tmp2, .saved_sam9_lpr1 - bic tmp2, #AT91_DDRSDRC_LPCB - orr tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH - - /* Enable DDRAM self-refresh mode */ - str tmp2, [ramc1, #AT91_DDRSDRC_LPR] -ddr_no_2nd_ctrl: - str tmp1, [sdramc, #AT91_DDRSDRC_LPR] - - b sdr_sr_done - - /* - * SDRAMC Memory controller - */ -sdr_sr_enable: - /* Enable SDRAM self-refresh mode */ - ldr tmp1, [sdramc, #AT91_SDRAMC_LPR] - str tmp1, .saved_sam9_lpr - - bic tmp1, #AT91_SDRAMC_LPCB - orr tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH - str tmp1, [sdramc, #AT91_SDRAMC_LPR] - -sdr_sr_done: - /* Save Master clock setting */ - ldr tmp1, [pmc, #AT91_PMC_MCKR] - str tmp1, .saved_mckr - - /* - * Set the Master clock source to slow clock - */ - bic tmp1, tmp1, #AT91_PMC_CSS - str tmp1, [pmc, #AT91_PMC_MCKR] - - wait_mckrdy - -#ifdef SLOWDOWN_MASTER_CLOCK - /* - * Set the Master Clock PRES and MDIV fields. - * - * See AT91RM9200 errata #27 and #28 for details. - */ - mov tmp1, #0 - str tmp1, [pmc, #AT91_PMC_MCKR] - - wait_mckrdy -#endif - - /* Save PLLA setting and disable it */ - ldr tmp1, [pmc, #AT91_CKGR_PLLAR] - str tmp1, .saved_pllar - - mov tmp1, #AT91_PMC_PLLCOUNT - orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */ - str tmp1, [pmc, #AT91_CKGR_PLLAR] - - /* Save PLLB setting and disable it */ - ldr tmp1, [pmc, #AT91_CKGR_PLLBR] - str tmp1, .saved_pllbr - - mov tmp1, #AT91_PMC_PLLCOUNT - str tmp1, [pmc, #AT91_CKGR_PLLBR] - - /* Turn off the main oscillator */ - ldr tmp1, [pmc, #AT91_CKGR_MOR] - bic tmp1, tmp1, #AT91_PMC_MOSCEN - orr tmp1, tmp1, #AT91_PMC_KEY - str tmp1, [pmc, #AT91_CKGR_MOR] - - /* Wait for interrupt */ - mcr p15, 0, tmp1, c7, c0, 4 - - /* Turn on the main oscillator */ - ldr tmp1, [pmc, #AT91_CKGR_MOR] - orr tmp1, tmp1, #AT91_PMC_MOSCEN - orr tmp1, tmp1, #AT91_PMC_KEY - str tmp1, [pmc, #AT91_CKGR_MOR] - - wait_moscrdy - - /* Restore PLLB setting */ - ldr tmp1, .saved_pllbr - str tmp1, [pmc, #AT91_CKGR_PLLBR] - - tst tmp1, #(AT91_PMC_MUL & 0xff0000) - bne 1f - tst tmp1, #(AT91_PMC_MUL & ~0xff0000) - beq 2f -1: - wait_pllblock -2: - - /* Restore PLLA setting */ - ldr tmp1, .saved_pllar - str tmp1, [pmc, #AT91_CKGR_PLLAR] - - tst tmp1, #(AT91_PMC_MUL & 0xff0000) - bne 3f - tst tmp1, #(AT91_PMC_MUL & ~0xff0000) - beq 4f -3: - wait_pllalock -4: - -#ifdef SLOWDOWN_MASTER_CLOCK - /* - * First set PRES if it was not 0, - * than set CSS and MDIV fields. - * - * See AT91RM9200 errata #27 and #28 for details. - */ - ldr tmp1, .saved_mckr - tst tmp1, #AT91_PMC_PRES - beq 2f - and tmp1, tmp1, #AT91_PMC_PRES - str tmp1, [pmc, #AT91_PMC_MCKR] - - wait_mckrdy -#endif - - /* - * Restore master clock setting - */ -2: ldr tmp1, .saved_mckr - str tmp1, [pmc, #AT91_PMC_MCKR] - - wait_mckrdy - - /* - * at91rm9200 Memory controller - * Do nothing - self-refresh is automatically disabled. - */ - cmp memctrl, #AT91_MEMCTRL_MC - beq ram_restored - - /* - * DDRSDR Memory controller - */ - cmp memctrl, #AT91_MEMCTRL_DDRSDR - bne sdr_en_restore - /* Restore MDR in case of LPDDR1 */ - ldr tmp1, .saved_sam9_mdr - str tmp1, [sdramc, #AT91_DDRSDRC_MDR] - /* Restore LPR on AT91 with DDRAM */ - ldr tmp1, .saved_sam9_lpr - str tmp1, [sdramc, #AT91_DDRSDRC_LPR] - - /* if we use the second ram controller */ - cmp ramc1, #0 - ldrne tmp2, .saved_sam9_mdr1 - strne tmp2, [ramc1, #AT91_DDRSDRC_MDR] - ldrne tmp2, .saved_sam9_lpr1 - strne tmp2, [ramc1, #AT91_DDRSDRC_LPR] - - b ram_restored - - /* - * SDRAMC Memory controller - */ -sdr_en_restore: - /* Restore LPR on AT91 with SDRAM */ - ldr tmp1, .saved_sam9_lpr - str tmp1, [sdramc, #AT91_SDRAMC_LPR] - -ram_restored: - /* Restore registers, and return */ - ldmfd sp!, {r4 - r12, pc} - - -.saved_mckr: - .word 0 - -.saved_pllar: - .word 0 - -.saved_pllbr: - .word 0 - -.saved_sam9_lpr: - .word 0 - -.saved_sam9_lpr1: - .word 0 - -.saved_sam9_mdr: - .word 0 - -.saved_sam9_mdr1: - .word 0 - -ENTRY(at91_slow_clock_sz) - .word .-at91_slow_clock diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S new file mode 100644 index 000000000000..7c444c259740 --- /dev/null +++ b/arch/arm/mach-at91/pm_suspend.S @@ -0,0 +1,338 @@ +/* + * arch/arm/mach-at91/pm_slow_clock.S + * + * Copyright (C) 2006 Savin Zlobec + * + * AT91SAM9 support: + * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/linkage.h> +#include <linux/clk/at91_pmc.h> +#include <mach/hardware.h> +#include <mach/at91_ramc.h> +#include "pm.h" + +#define SRAMC_SELF_FRESH_ACTIVE 0x01 +#define SRAMC_SELF_FRESH_EXIT 0x00 + +pmc .req r0 +tmp1 .req r4 +tmp2 .req r5 + +/* + * Wait until master clock is ready (after switching master clock source) + */ + .macro wait_mckrdy +1: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MCKRDY + beq 1b + .endm + +/* + * Wait until master oscillator has stabilized. + */ + .macro wait_moscrdy +1: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MOSCS + beq 1b + .endm + +/* + * Wait until PLLA has locked. + */ + .macro wait_pllalock +1: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_LOCKA + beq 1b + .endm + +/* + * Put the processor to enter the idle state + */ + .macro at91_cpu_idle + +#if defined(CONFIG_CPU_V7) + mov tmp1, #AT91_PMC_PCK + str tmp1, [pmc, #AT91_PMC_SCDR] + + dsb + + wfi @ Wait For Interrupt +#else + mcr p15, 0, tmp1, c7, c0, 4 +#endif + + .endm + + .text + + .arm + +/* + * void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc, + * void __iomem *ramc1, int memctrl) + * @input param: + * @r0: base address of AT91_PMC + * @r1: base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS) + * @r2: base address of second SDRAM Controller or 0 if not present + * @r3: pm information + */ +ENTRY(at91_pm_suspend_in_sram) + /* Save registers on stack */ + stmfd sp!, {r4 - r12, lr} + + /* Drain write buffer */ + mov tmp1, #0 + mcr p15, 0, tmp1, c7, c10, 4 + + str r0, .pmc_base + str r1, .sramc_base + str r2, .sramc1_base + + and r0, r3, #AT91_PM_MEMTYPE_MASK + str r0, .memtype + + lsr r0, r3, #AT91_PM_MODE_OFFSET + and r0, r0, #AT91_PM_MODE_MASK + str r0, .pm_mode + + /* Active the self-refresh mode */ + mov r0, #SRAMC_SELF_FRESH_ACTIVE + bl at91_sramc_self_refresh + + ldr r0, .pm_mode + tst r0, #AT91_PM_SLOW_CLOCK + beq skip_disable_main_clock + + ldr pmc, .pmc_base + + /* Save Master clock setting */ + ldr tmp1, [pmc, #AT91_PMC_MCKR] + str tmp1, .saved_mckr + + /* + * Set the Master clock source to slow clock + */ + bic tmp1, tmp1, #AT91_PMC_CSS + str tmp1, [pmc, #AT91_PMC_MCKR] + + wait_mckrdy + + /* Save PLLA setting and disable it */ + ldr tmp1, [pmc, #AT91_CKGR_PLLAR] + str tmp1, .saved_pllar + + mov tmp1, #AT91_PMC_PLLCOUNT + orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */ + str tmp1, [pmc, #AT91_CKGR_PLLAR] + + /* Turn off the main oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + bic tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + +skip_disable_main_clock: + ldr pmc, .pmc_base + + /* Wait for interrupt */ + at91_cpu_idle + + ldr r0, .pm_mode + tst r0, #AT91_PM_SLOW_CLOCK + beq skip_enable_main_clock + + ldr pmc, .pmc_base + + /* Turn on the main oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + orr tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + wait_moscrdy + + /* Restore PLLA setting */ + ldr tmp1, .saved_pllar + str tmp1, [pmc, #AT91_CKGR_PLLAR] + + tst tmp1, #(AT91_PMC_MUL & 0xff0000) + bne 3f + tst tmp1, #(AT91_PMC_MUL & ~0xff0000) + beq 4f +3: + wait_pllalock +4: + + /* + * Restore master clock setting + */ + ldr tmp1, .saved_mckr + str tmp1, [pmc, #AT91_PMC_MCKR] + + wait_mckrdy + +skip_enable_main_clock: + /* Exit the self-refresh mode */ + mov r0, #SRAMC_SELF_FRESH_EXIT + bl at91_sramc_self_refresh + + /* Restore registers, and return */ + ldmfd sp!, {r4 - r12, pc} +ENDPROC(at91_pm_suspend_in_sram) + +/* + * void at91_sramc_self_refresh(unsigned int is_active) + * + * @input param: + * @r0: 1 - active self-refresh mode + * 0 - exit self-refresh mode + * register usage: + * @r1: memory type + * @r2: base address of the sram controller + */ + +ENTRY(at91_sramc_self_refresh) + ldr r1, .memtype + ldr r2, .sramc_base + + cmp r1, #AT91_MEMCTRL_MC + bne ddrc_sf + + /* + * at91rm9200 Memory controller + */ + + /* + * For exiting the self-refresh mode, do nothing, + * automatically exit the self-refresh mode. + */ + tst r0, #SRAMC_SELF_FRESH_ACTIVE + beq exit_sramc_sf + + /* Active SDRAM self-refresh mode */ + mov r3, #1 + str r3, [r2, #AT91RM9200_SDRAMC_SRR] + b exit_sramc_sf + +ddrc_sf: + cmp r1, #AT91_MEMCTRL_DDRSDR + bne sdramc_sf + + /* + * DDR Memory controller + */ + tst r0, #SRAMC_SELF_FRESH_ACTIVE + beq ddrc_exit_sf + + /* LPDDR1 --> force DDR2 mode during self-refresh */ + ldr r3, [r2, #AT91_DDRSDRC_MDR] + str r3, .saved_sam9_mdr + bic r3, r3, #~AT91_DDRSDRC_MD + cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR + ldreq r3, [r2, #AT91_DDRSDRC_MDR] + biceq r3, r3, #AT91_DDRSDRC_MD + orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 + streq r3, [r2, #AT91_DDRSDRC_MDR] + + /* Active DDRC self-refresh mode */ + ldr r3, [r2, #AT91_DDRSDRC_LPR] + str r3, .saved_sam9_lpr + bic r3, r3, #AT91_DDRSDRC_LPCB + orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_DDRSDRC_LPR] + + /* If using the 2nd ddr controller */ + ldr r2, .sramc1_base + cmp r2, #0 + beq no_2nd_ddrc + + ldr r3, [r2, #AT91_DDRSDRC_MDR] + str r3, .saved_sam9_mdr1 + bic r3, r3, #~AT91_DDRSDRC_MD + cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR + ldreq r3, [r2, #AT91_DDRSDRC_MDR] + biceq r3, r3, #AT91_DDRSDRC_MD + orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 + streq r3, [r2, #AT91_DDRSDRC_MDR] + + /* Active DDRC self-refresh mode */ + ldr r3, [r2, #AT91_DDRSDRC_LPR] + str r3, .saved_sam9_lpr1 + bic r3, r3, #AT91_DDRSDRC_LPCB + orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_DDRSDRC_LPR] + +no_2nd_ddrc: + b exit_sramc_sf + +ddrc_exit_sf: + /* Restore MDR in case of LPDDR1 */ + ldr r3, .saved_sam9_mdr + str r3, [r2, #AT91_DDRSDRC_MDR] + /* Restore LPR on AT91 with DDRAM */ + ldr r3, .saved_sam9_lpr + str r3, [r2, #AT91_DDRSDRC_LPR] + + /* If using the 2nd ddr controller */ + ldr r2, .sramc1_base + cmp r2, #0 + ldrne r3, .saved_sam9_mdr1 + strne r3, [r2, #AT91_DDRSDRC_MDR] + ldrne r3, .saved_sam9_lpr1 + strne r3, [r2, #AT91_DDRSDRC_LPR] + + b exit_sramc_sf + + /* + * SDRAMC Memory controller + */ +sdramc_sf: + tst r0, #SRAMC_SELF_FRESH_ACTIVE + beq sdramc_exit_sf + + /* Active SDRAMC self-refresh mode */ + ldr r3, [r2, #AT91_SDRAMC_LPR] + str r3, .saved_sam9_lpr + bic r3, r3, #AT91_SDRAMC_LPCB + orr r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_SDRAMC_LPR] + +sdramc_exit_sf: + ldr r3, .saved_sam9_lpr + str r3, [r2, #AT91_SDRAMC_LPR] + +exit_sramc_sf: + mov pc, lr +ENDPROC(at91_sramc_self_refresh) + +.pmc_base: + .word 0 +.sramc_base: + .word 0 +.sramc1_base: + .word 0 +.memtype: + .word 0 +.pm_mode: + .word 0 +.saved_mckr: + .word 0 +.saved_pllar: + .word 0 +.saved_sam9_lpr: + .word 0 +.saved_sam9_lpr1: + .word 0 +.saved_sam9_mdr: + .word 0 +.saved_sam9_mdr1: + .word 0 + +ENTRY(at91_pm_suspend_in_sram_sz) + .word .-at91_pm_suspend_in_sram diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c index 03dcb441f3d2..ef5d2073774b 100644 --- a/arch/arm/mach-at91/sama5.c +++ b/arch/arm/mach-at91/sama5.c @@ -7,48 +7,50 @@ * Licensed under GPLv2 or later. */ -#include <linux/types.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/gpio.h> -#include <linux/micrel_phy.h> #include <linux/of.h> -#include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/phy.h> -#include <linux/clk-provider.h> -#include <linux/phy.h> -#include <mach/hardware.h> - -#include <asm/setup.h> -#include <asm/irq.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include "generic.h" +#include <asm/system_misc.h> -static int ksz8081_phy_fixup(struct phy_device *phy) -{ - int value; +#include <mach/hardware.h> - value = phy_read(phy, 0x16); - value &= ~0x20; - phy_write(phy, 0x16, value); +#include "generic.h" +#include "soc.h" - return 0; -} +static const struct at91_soc sama5_socs[] = { + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH, + "sama5d31", "sama5d3"), + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH, + "sama5d33", "sama5d3"), + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH, + "sama5d34", "sama5d3"), + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH, + "sama5d35", "sama5d3"), + AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH, + "sama5d36", "sama5d3"), + AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH, + "sama5d41", "sama5d4"), + AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH, + "sama5d42", "sama5d4"), + AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH, + "sama5d43", "sama5d4"), + AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH, + "sama5d44", "sama5d4"), + { /* sentinel */ }, +}; static void __init sama5_dt_device_init(void) { - if (of_machine_is_compatible("atmel,sama5d4ek") && - IS_ENABLED(CONFIG_PHYLIB)) { - phy_register_fixup_for_id("fc028000.etherne:00", - ksz8081_phy_fixup); - } + struct soc_device *soc; + struct device *soc_dev = NULL; + + soc = at91_soc_init(sama5_socs); + if (soc != NULL) + soc_dev = soc_device_to_device(soc); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); at91sam9x5_pm_init(); } @@ -59,44 +61,10 @@ static const char *sama5_dt_board_compat[] __initconst = { DT_MACHINE_START(sama5_dt, "Atmel SAMA5") /* Maintainer: Atmel */ - .map_io = at91_map_io, .init_machine = sama5_dt_device_init, .dt_compat = sama5_dt_board_compat, MACHINE_END -static struct map_desc at91_io_desc[] __initdata = { - { - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC), - .pfn = __phys_to_pfn(SAMA5D4_BASE_MPDDRC), - .length = SZ_512, - .type = MT_DEVICE, - }, - { - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC), - .pfn = __phys_to_pfn(SAMA5D4_BASE_PMC), - .length = SZ_512, - .type = MT_DEVICE, - }, - { /* On sama5d4, we use USART3 as serial console */ - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3), - .pfn = __phys_to_pfn(SAMA5D4_BASE_USART3), - .length = SZ_256, - .type = MT_DEVICE, - }, - { /* A bunch of peripheral with fine grained IO space */ - .virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2), - .pfn = __phys_to_pfn(SAMA5D4_BASE_SYS2), - .length = SZ_2K, - .type = MT_DEVICE, - }, -}; - -static void __init sama5_alt_map_io(void) -{ - at91_alt_map_io(); - iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc)); -} - static const char *sama5_alt_dt_board_compat[] __initconst = { "atmel,sama5d4", NULL @@ -104,7 +72,6 @@ static const char *sama5_alt_dt_board_compat[] __initconst = { DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5") /* Maintainer: Atmel */ - .map_io = sama5_alt_map_io, .init_machine = sama5_dt_device_init, .dt_compat = sama5_alt_dt_board_compat, .l2c_aux_mask = ~0UL, diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c deleted file mode 100644 index 4e58bc90ed21..000000000000 --- a/arch/arm/mach-at91/setup.c +++ /dev/null @@ -1,330 +0,0 @@ -/* - * Copyright (C) 2007 Atmel Corporation. - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Under GPLv2 - */ - -#define pr_fmt(fmt) "AT91: " fmt - -#include <linux/module.h> -#include <linux/io.h> -#include <linux/mm.h> -#include <linux/pm.h> -#include <linux/of_address.h> -#include <linux/pinctrl/machine.h> -#include <linux/clk/at91_pmc.h> - -#include <asm/system_misc.h> -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/cpu.h> -#include <mach/at91_dbgu.h> - -#include "generic.h" -#include "pm.h" - -struct at91_socinfo at91_soc_initdata; -EXPORT_SYMBOL(at91_soc_initdata); - -static struct map_desc at91_io_desc __initdata __maybe_unused = { - .virtual = (unsigned long)AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, -}; - -static struct map_desc at91_alt_io_desc __initdata __maybe_unused = { - .virtual = (unsigned long)AT91_ALT_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_ALT_BASE_SYS), - .length = 24 * SZ_1K, - .type = MT_DEVICE, -}; - -static void __init soc_detect(u32 dbgu_base) -{ - u32 cidr, socid; - - cidr = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_CIDR); - socid = cidr & ~AT91_CIDR_VERSION; - - switch (socid) { - case ARCH_ID_AT91RM9200: - at91_soc_initdata.type = AT91_SOC_RM9200; - if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN) - at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; - break; - - case ARCH_ID_AT91SAM9260: - at91_soc_initdata.type = AT91_SOC_SAM9260; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9261: - at91_soc_initdata.type = AT91_SOC_SAM9261; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9263: - at91_soc_initdata.type = AT91_SOC_SAM9263; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9G20: - at91_soc_initdata.type = AT91_SOC_SAM9G20; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9G45: - at91_soc_initdata.type = AT91_SOC_SAM9G45; - if (cidr == ARCH_ID_AT91SAM9G45ES) - at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES; - break; - - case ARCH_ID_AT91SAM9RL64: - at91_soc_initdata.type = AT91_SOC_SAM9RL; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - break; - - case ARCH_ID_AT91SAM9X5: - at91_soc_initdata.type = AT91_SOC_SAM9X5; - break; - - case ARCH_ID_AT91SAM9N12: - at91_soc_initdata.type = AT91_SOC_SAM9N12; - break; - - case ARCH_ID_SAMA5: - at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); - if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) { - at91_soc_initdata.type = AT91_SOC_SAMA5D3; - } - break; - } - - /* at91sam9g10 */ - if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { - at91_soc_initdata.type = AT91_SOC_SAM9G10; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; - } - /* at91sam9xe */ - else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) { - at91_soc_initdata.type = AT91_SOC_SAM9260; - at91_soc_initdata.subtype = AT91_SOC_SAM9XE; - } - - if (!at91_soc_is_detected()) - return; - - at91_soc_initdata.cidr = cidr; - - /* sub version of soc */ - if (!at91_soc_initdata.exid) - at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); - - if (at91_soc_initdata.type == AT91_SOC_SAM9G45) { - switch (at91_soc_initdata.exid) { - case ARCH_EXID_AT91SAM9M10: - at91_soc_initdata.subtype = AT91_SOC_SAM9M10; - break; - case ARCH_EXID_AT91SAM9G46: - at91_soc_initdata.subtype = AT91_SOC_SAM9G46; - break; - case ARCH_EXID_AT91SAM9M11: - at91_soc_initdata.subtype = AT91_SOC_SAM9M11; - break; - } - } - - if (at91_soc_initdata.type == AT91_SOC_SAM9X5) { - switch (at91_soc_initdata.exid) { - case ARCH_EXID_AT91SAM9G15: - at91_soc_initdata.subtype = AT91_SOC_SAM9G15; - break; - case ARCH_EXID_AT91SAM9G35: - at91_soc_initdata.subtype = AT91_SOC_SAM9G35; - break; - case ARCH_EXID_AT91SAM9X35: - at91_soc_initdata.subtype = AT91_SOC_SAM9X35; - break; - case ARCH_EXID_AT91SAM9G25: - at91_soc_initdata.subtype = AT91_SOC_SAM9G25; - break; - case ARCH_EXID_AT91SAM9X25: - at91_soc_initdata.subtype = AT91_SOC_SAM9X25; - break; - } - } - - if (at91_soc_initdata.type == AT91_SOC_SAMA5D3) { - switch (at91_soc_initdata.exid) { - case ARCH_EXID_SAMA5D31: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D31; - break; - case ARCH_EXID_SAMA5D33: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D33; - break; - case ARCH_EXID_SAMA5D34: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D34; - break; - case ARCH_EXID_SAMA5D35: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D35; - break; - case ARCH_EXID_SAMA5D36: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D36; - break; - } - } -} - -static void __init alt_soc_detect(u32 dbgu_base) -{ - u32 cidr, socid; - - /* SoC ID */ - cidr = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_CIDR); - socid = cidr & ~AT91_CIDR_VERSION; - - switch (socid) { - case ARCH_ID_SAMA5: - at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID); - if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) { - at91_soc_initdata.type = AT91_SOC_SAMA5D3; - } else if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D4) { - at91_soc_initdata.type = AT91_SOC_SAMA5D4; - } - break; - } - - if (!at91_soc_is_detected()) - return; - - at91_soc_initdata.cidr = cidr; - - /* sub version of soc */ - if (!at91_soc_initdata.exid) - at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID); - - if (at91_soc_initdata.type == AT91_SOC_SAMA5D4) { - switch (at91_soc_initdata.exid) { - case ARCH_EXID_SAMA5D41: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D41; - break; - case ARCH_EXID_SAMA5D42: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D42; - break; - case ARCH_EXID_SAMA5D43: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D43; - break; - case ARCH_EXID_SAMA5D44: - at91_soc_initdata.subtype = AT91_SOC_SAMA5D44; - break; - } - } -} - -static const char *soc_name[] = { - [AT91_SOC_RM9200] = "at91rm9200", - [AT91_SOC_SAM9260] = "at91sam9260", - [AT91_SOC_SAM9261] = "at91sam9261", - [AT91_SOC_SAM9263] = "at91sam9263", - [AT91_SOC_SAM9G10] = "at91sam9g10", - [AT91_SOC_SAM9G20] = "at91sam9g20", - [AT91_SOC_SAM9G45] = "at91sam9g45", - [AT91_SOC_SAM9RL] = "at91sam9rl", - [AT91_SOC_SAM9X5] = "at91sam9x5", - [AT91_SOC_SAM9N12] = "at91sam9n12", - [AT91_SOC_SAMA5D3] = "sama5d3", - [AT91_SOC_SAMA5D4] = "sama5d4", - [AT91_SOC_UNKNOWN] = "Unknown", -}; - -const char *at91_get_soc_type(struct at91_socinfo *c) -{ - return soc_name[c->type]; -} -EXPORT_SYMBOL(at91_get_soc_type); - -static const char *soc_subtype_name[] = { - [AT91_SOC_RM9200_BGA] = "at91rm9200 BGA", - [AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP", - [AT91_SOC_SAM9XE] = "at91sam9xe", - [AT91_SOC_SAM9G45ES] = "at91sam9g45es", - [AT91_SOC_SAM9M10] = "at91sam9m10", - [AT91_SOC_SAM9G46] = "at91sam9g46", - [AT91_SOC_SAM9M11] = "at91sam9m11", - [AT91_SOC_SAM9G15] = "at91sam9g15", - [AT91_SOC_SAM9G35] = "at91sam9g35", - [AT91_SOC_SAM9X35] = "at91sam9x35", - [AT91_SOC_SAM9G25] = "at91sam9g25", - [AT91_SOC_SAM9X25] = "at91sam9x25", - [AT91_SOC_SAMA5D31] = "sama5d31", - [AT91_SOC_SAMA5D33] = "sama5d33", - [AT91_SOC_SAMA5D34] = "sama5d34", - [AT91_SOC_SAMA5D35] = "sama5d35", - [AT91_SOC_SAMA5D36] = "sama5d36", - [AT91_SOC_SAMA5D41] = "sama5d41", - [AT91_SOC_SAMA5D42] = "sama5d42", - [AT91_SOC_SAMA5D43] = "sama5d43", - [AT91_SOC_SAMA5D44] = "sama5d44", - [AT91_SOC_SUBTYPE_NONE] = "None", - [AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown", -}; - -const char *at91_get_soc_subtype(struct at91_socinfo *c) -{ - return soc_subtype_name[c->subtype]; -} -EXPORT_SYMBOL(at91_get_soc_subtype); - -void __init at91_map_io(void) -{ - /* Map peripherals */ - iotable_init(&at91_io_desc, 1); - - at91_soc_initdata.type = AT91_SOC_UNKNOWN; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN; - - soc_detect(AT91_BASE_DBGU0); - if (!at91_soc_is_detected()) - soc_detect(AT91_BASE_DBGU1); - - if (!at91_soc_is_detected()) - panic(pr_fmt("Impossible to detect the SOC type")); - - pr_info("Detected soc type: %s\n", - at91_get_soc_type(&at91_soc_initdata)); - if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) - pr_info("Detected soc subtype: %s\n", - at91_get_soc_subtype(&at91_soc_initdata)); -} - -void __init at91_alt_map_io(void) -{ - /* Map peripherals */ - iotable_init(&at91_alt_io_desc, 1); - - at91_soc_initdata.type = AT91_SOC_UNKNOWN; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN; - - alt_soc_detect(AT91_BASE_DBGU2); - if (!at91_soc_is_detected()) - panic("AT91: Impossible to detect the SOC type"); - - pr_info("AT91: Detected soc type: %s\n", - at91_get_soc_type(&at91_soc_initdata)); - if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) - pr_info("AT91: Detected soc subtype: %s\n", - at91_get_soc_subtype(&at91_soc_initdata)); -} - -void __iomem *at91_matrix_base; -EXPORT_SYMBOL_GPL(at91_matrix_base); - -void __init at91_ioremap_matrix(u32 base_addr) -{ - at91_matrix_base = ioremap(base_addr, 512); - if (!at91_matrix_base) - panic(pr_fmt("Impossible to ioremap at91_matrix_base\n")); -} diff --git a/arch/arm/mach-at91/soc.c b/arch/arm/mach-at91/soc.c new file mode 100644 index 000000000000..54343ffa3e53 --- /dev/null +++ b/arch/arm/mach-at91/soc.c @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2015 Atmel + * + * Alexandre Belloni <alexandre.belloni@free-electrons.com + * Boris Brezillon <boris.brezillon@free-electrons.com + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + */ + +#define pr_fmt(fmt) "AT91: " fmt + +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> + +#include "soc.h" + +#define AT91_DBGU_CIDR 0x40 +#define AT91_DBGU_CIDR_VERSION(x) ((x) & 0x1f) +#define AT91_DBGU_CIDR_EXT BIT(31) +#define AT91_DBGU_CIDR_MATCH_MASK 0x7fffffe0 +#define AT91_DBGU_EXID 0x44 + +struct soc_device * __init at91_soc_init(const struct at91_soc *socs) +{ + struct soc_device_attribute *soc_dev_attr; + const struct at91_soc *soc; + struct soc_device *soc_dev; + struct device_node *np; + void __iomem *regs; + u32 cidr, exid; + + np = of_find_compatible_node(NULL, NULL, "atmel,at91rm9200-dbgu"); + if (!np) + np = of_find_compatible_node(NULL, NULL, + "atmel,at91sam9260-dbgu"); + + if (!np) { + pr_warn("Could not find DBGU node"); + return NULL; + } + + regs = of_iomap(np, 0); + of_node_put(np); + + if (!regs) { + pr_warn("Could not map DBGU iomem range"); + return NULL; + } + + cidr = readl(regs + AT91_DBGU_CIDR); + exid = readl(regs + AT91_DBGU_EXID); + + iounmap(regs); + + for (soc = socs; soc->name; soc++) { + if (soc->cidr_match != (cidr & AT91_DBGU_CIDR_MATCH_MASK)) + continue; + + if (!(cidr & AT91_DBGU_CIDR_EXT) || soc->exid_match == exid) + break; + } + + if (!soc->name) { + pr_warn("Could not find matching SoC description\n"); + return NULL; + } + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return NULL; + + soc_dev_attr->family = soc->family; + soc_dev_attr->soc_id = soc->name; + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X", + AT91_DBGU_CIDR_VERSION(cidr)); + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr); + pr_warn("Could not register SoC device\n"); + return NULL; + } + + if (soc->family) + pr_info("Detected SoC family: %s\n", soc->family); + pr_info("Detected SoC: %s, revision %X\n", soc->name, + AT91_DBGU_CIDR_VERSION(cidr)); + + return soc_dev; +} diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h new file mode 100644 index 000000000000..be23c400596b --- /dev/null +++ b/arch/arm/mach-at91/soc.h @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2015 Atmel + * + * Boris Brezillon <boris.brezillon@free-electrons.com + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + */ + +#ifndef __AT91_SOC_H +#define __AT91_SOC_H + +#include <linux/sys_soc.h> + +struct at91_soc { + u32 cidr_match; + u32 exid_match; + const char *name; + const char *family; +}; + +#define AT91_SOC(__cidr, __exid, __name, __family) \ + { \ + .cidr_match = (__cidr), \ + .exid_match = (__exid), \ + .name = (__name), \ + .family = (__family), \ + } + +struct soc_device * __init +at91_soc_init(const struct at91_soc *socs); + +#define AT91RM9200_CIDR_MATCH 0x09290780 + +#define AT91SAM9260_CIDR_MATCH 0x019803a0 +#define AT91SAM9261_CIDR_MATCH 0x019703a0 +#define AT91SAM9263_CIDR_MATCH 0x019607a0 +#define AT91SAM9G20_CIDR_MATCH 0x019905a0 +#define AT91SAM9RL64_CIDR_MATCH 0x019b03a0 +#define AT91SAM9G45_CIDR_MATCH 0x019b05a0 +#define AT91SAM9X5_CIDR_MATCH 0x019a05a0 +#define AT91SAM9N12_CIDR_MATCH 0x019a07a0 + +#define AT91SAM9M11_EXID_MATCH 0x00000001 +#define AT91SAM9M10_EXID_MATCH 0x00000002 +#define AT91SAM9G46_EXID_MATCH 0x00000003 +#define AT91SAM9G45_EXID_MATCH 0x00000004 + +#define AT91SAM9G15_EXID_MATCH 0x00000000 +#define AT91SAM9G35_EXID_MATCH 0x00000001 +#define AT91SAM9X35_EXID_MATCH 0x00000002 +#define AT91SAM9G25_EXID_MATCH 0x00000003 +#define AT91SAM9X25_EXID_MATCH 0x00000004 + +#define AT91SAM9CN12_EXID_MATCH 0x00000005 +#define AT91SAM9N12_EXID_MATCH 0x00000006 +#define AT91SAM9CN11_EXID_MATCH 0x00000009 + +#define AT91SAM9XE128_CIDR_MATCH 0x329973a0 +#define AT91SAM9XE256_CIDR_MATCH 0x329a93a0 +#define AT91SAM9XE512_CIDR_MATCH 0x329aa3a0 + +#define SAMA5D3_CIDR_MATCH 0x0a5c07c0 +#define SAMA5D31_EXID_MATCH 0x00444300 +#define SAMA5D33_EXID_MATCH 0x00414300 +#define SAMA5D34_EXID_MATCH 0x00414301 +#define SAMA5D35_EXID_MATCH 0x00584300 +#define SAMA5D36_EXID_MATCH 0x00004301 + +#define SAMA5D4_CIDR_MATCH 0x0a5c07c0 +#define SAMA5D41_EXID_MATCH 0x00000001 +#define SAMA5D42_EXID_MATCH 0x00000002 +#define SAMA5D43_EXID_MATCH 0x00000003 +#define SAMA5D44_EXID_MATCH 0x00000004 + +#endif /* __AT91_SOC_H */ diff --git a/arch/arm/mach-davinci/asp.h b/arch/arm/mach-davinci/asp.h index d9b2acd12393..1128e1d8e4b4 100644 --- a/arch/arm/mach-davinci/asp.h +++ b/arch/arm/mach-davinci/asp.h @@ -21,6 +21,9 @@ /* Bases of da830 McASP1 register banks */ #define DAVINCI_DA830_MCASP1_REG_BASE 0x01D04000 +/* Bases of da830 McASP2 register banks */ +#define DAVINCI_DA830_MCASP2_REG_BASE 0x01D08000 + /* EDMA channels of dm644x and dm355 */ #define DAVINCI_DMA_ASP0_TX 2 #define DAVINCI_DMA_ASP0_RX 3 @@ -40,6 +43,10 @@ #define DAVINCI_DA830_DMA_MCASP1_AREVT 2 #define DAVINCI_DA830_DMA_MCASP1_AXEVT 3 +/* EDMA channels of da830 McASP2 */ +#define DAVINCI_DA830_DMA_MCASP2_AREVT 4 +#define DAVINCI_DA830_DMA_MCASP2_AXEVT 5 + /* Interrupts */ #define DAVINCI_ASP0_RX_INT IRQ_MBRINT #define DAVINCI_ASP0_TX_INT IRQ_MBXINT diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index b85b781b05fd..ddfdd820e6f2 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -463,16 +463,23 @@ static struct resource da830_mcasp1_resources[] = { }, /* TX event */ { + .name = "tx", .start = DAVINCI_DA830_DMA_MCASP1_AXEVT, .end = DAVINCI_DA830_DMA_MCASP1_AXEVT, .flags = IORESOURCE_DMA, }, /* RX event */ { + .name = "rx", .start = DAVINCI_DA830_DMA_MCASP1_AREVT, .end = DAVINCI_DA830_DMA_MCASP1_AREVT, .flags = IORESOURCE_DMA, }, + { + .name = "common", + .start = IRQ_DA8XX_MCASPINT, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device da830_mcasp1_device = { @@ -482,6 +489,41 @@ static struct platform_device da830_mcasp1_device = { .resource = da830_mcasp1_resources, }; +static struct resource da830_mcasp2_resources[] = { + { + .name = "mpu", + .start = DAVINCI_DA830_MCASP2_REG_BASE, + .end = DAVINCI_DA830_MCASP2_REG_BASE + (SZ_1K * 12) - 1, + .flags = IORESOURCE_MEM, + }, + /* TX event */ + { + .name = "tx", + .start = DAVINCI_DA830_DMA_MCASP2_AXEVT, + .end = DAVINCI_DA830_DMA_MCASP2_AXEVT, + .flags = IORESOURCE_DMA, + }, + /* RX event */ + { + .name = "rx", + .start = DAVINCI_DA830_DMA_MCASP2_AREVT, + .end = DAVINCI_DA830_DMA_MCASP2_AREVT, + .flags = IORESOURCE_DMA, + }, + { + .name = "common", + .start = IRQ_DA8XX_MCASPINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da830_mcasp2_device = { + .name = "davinci-mcasp", + .id = 2, + .num_resources = ARRAY_SIZE(da830_mcasp2_resources), + .resource = da830_mcasp2_resources, +}; + static struct resource da850_mcasp_resources[] = { { .name = "mpu", @@ -491,16 +533,23 @@ static struct resource da850_mcasp_resources[] = { }, /* TX event */ { + .name = "tx", .start = DAVINCI_DA8XX_DMA_MCASP0_AXEVT, .end = DAVINCI_DA8XX_DMA_MCASP0_AXEVT, .flags = IORESOURCE_DMA, }, /* RX event */ { + .name = "rx", .start = DAVINCI_DA8XX_DMA_MCASP0_AREVT, .end = DAVINCI_DA8XX_DMA_MCASP0_AREVT, .flags = IORESOURCE_DMA, }, + { + .name = "common", + .start = IRQ_DA8XX_MCASPINT, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device da850_mcasp_device = { @@ -512,14 +561,31 @@ static struct platform_device da850_mcasp_device = { void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata) { - /* DA830/OMAP-L137 has 3 instances of McASP */ - if (cpu_is_davinci_da830() && id == 1) { - da830_mcasp1_device.dev.platform_data = pdata; - platform_device_register(&da830_mcasp1_device); - } else if (cpu_is_davinci_da850()) { - da850_mcasp_device.dev.platform_data = pdata; - platform_device_register(&da850_mcasp_device); + struct platform_device *pdev; + + switch (id) { + case 0: + /* Valid for DA830/OMAP-L137 or DA850/OMAP-L138 */ + pdev = &da850_mcasp_device; + break; + case 1: + /* Valid for DA830/OMAP-L137 only */ + if (!cpu_is_davinci_da830()) + return; + pdev = &da830_mcasp1_device; + break; + case 2: + /* Valid for DA830/OMAP-L137 only */ + if (!cpu_is_davinci_da830()) + return; + pdev = &da830_mcasp2_device; + break; + default: + return; } + + pdev->dev.platform_data = pdata; + platform_device_register(pdev); } static struct resource da8xx_pruss_resources[] = { diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 6c3bbea7d77d..3f842bb266d6 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -493,7 +493,6 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_DM646X_EMACMISCINT] = 7, [IRQ_DM646X_MCASP0TXINT] = 7, [IRQ_DM646X_MCASP0RXINT] = 7, - [IRQ_AEMIFINT] = 7, [IRQ_DM646X_RESERVED_3] = 7, [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ [IRQ_TINT0_TINT34] = 7, /* clocksource */ @@ -610,19 +609,31 @@ static struct resource dm646x_mcasp0_resources[] = { .end = DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1, .flags = IORESOURCE_MEM, }, - /* first TX, then RX */ { + .name = "tx", .start = DAVINCI_DM646X_DMA_MCASP0_AXEVT0, .end = DAVINCI_DM646X_DMA_MCASP0_AXEVT0, .flags = IORESOURCE_DMA, }, { + .name = "rx", .start = DAVINCI_DM646X_DMA_MCASP0_AREVT0, .end = DAVINCI_DM646X_DMA_MCASP0_AREVT0, .flags = IORESOURCE_DMA, }, + { + .name = "tx", + .start = IRQ_DM646X_MCASP0TXINT, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = IRQ_DM646X_MCASP0RXINT, + .flags = IORESOURCE_IRQ, + }, }; +/* DIT mode only, rx is not supported */ static struct resource dm646x_mcasp1_resources[] = { { .name = "mpu", @@ -630,17 +641,16 @@ static struct resource dm646x_mcasp1_resources[] = { .end = DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1, .flags = IORESOURCE_MEM, }, - /* DIT mode, only TX event */ { + .name = "tx", .start = DAVINCI_DM646X_DMA_MCASP1_AXEVT1, .end = DAVINCI_DM646X_DMA_MCASP1_AXEVT1, .flags = IORESOURCE_DMA, }, - /* DIT mode, dummy entry */ { - .start = -1, - .end = -1, - .flags = IORESOURCE_DMA, + .name = "tx", + .start = IRQ_DM646X_MCASP1TXINT, + .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index 354af71798dc..edb2ca62321a 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -129,8 +129,8 @@ #define IRQ_DM646X_EMACMISCINT 27 #define IRQ_DM646X_MCASP0TXINT 28 #define IRQ_DM646X_MCASP0RXINT 29 +#define IRQ_DM646X_MCASP1TXINT 30 #define IRQ_DM646X_RESERVED_3 31 -#define IRQ_DM646X_MCASP1TXINT 32 #define IRQ_DM646X_VLQINT 38 #define IRQ_DM646X_UARTINT2 42 #define IRQ_DM646X_SPINT0 43 diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index c8dffcee9736..0748747b2bc6 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -77,13 +77,6 @@ config SOC_IMX21 select IMX_HAVE_IOMUX_V1 select MXC_AVIC -config SOC_IMX25 - bool - select ARCH_MXC_IOMUX_V3 - select CPU_ARM926T - select MXC_AVIC - select PINCTRL_IMX25 - config SOC_IMX27 bool select CPU_ARM926T @@ -149,62 +142,6 @@ config MACH_MX21ADS Include support for MX21ADS platform. This includes specific configurations for the board and its peripherals. -comment "MX25 platforms:" - -config MACH_MX25_3DS - bool "Support MX25PDK (3DS) Platform" - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMXDI_RTC - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select SOC_IMX25 - -config MACH_EUKREA_CPUIMX25SD - bool "Support Eukrea CPUIMX25 Platform" - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMXDI_RTC - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX25 - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX25SD - default MACH_EUKREA_MBIMXSD25_BASEBOARD - -config MACH_EUKREA_MBIMXSD25_BASEBOARD - bool "Eukrea MBIMXSD development board" - select IMX_HAVE_PLATFORM_GPIO_KEYS - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - -config MACH_IMX25_DT - bool "Support i.MX25 platforms from device tree" - select SOC_IMX25 - help - Include support for Freescale i.MX25 based platforms - using the device tree for discovery - comment "MX27 platforms:" config MACH_MX27ADS @@ -557,6 +494,20 @@ config MACH_VPR200 endif +if ARCH_MULTI_V5 + +comment "Device tree only" + +config SOC_IMX25 + bool "i.MX25 support" + select ARCH_MXC_IOMUX_V3 + select CPU_ARM926T + select MXC_AVIC + select PINCTRL_IMX25 + help + This enables support for Freescale i.MX25 processor +endif + if ARCH_MULTI_V7 comment "Device tree only" @@ -637,7 +588,7 @@ config SOC_VF610 select PL310_ERRATA_769419 if CACHE_L2X0 help - This enable support for Freescale Vybrid VF610 processor. + This enables support for Freescale Vybrid VF610 processor. choice prompt "Clocksource for scheduler clock" @@ -667,7 +618,7 @@ config SOC_LS1021A select ZONE_DMA if ARM_LPAE help - This enable support for Freescale LS1021A processor. + This enables support for Freescale LS1021A processor. endif diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 8d1b10180908..3244cf1d2773 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -3,7 +3,7 @@ obj-y := time.o cpu.o system.o irq-common.o obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o -obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o +obj-$(CONFIG_SOC_IMX25) += clk-imx25.o cpu-imx25.o mach-imx25.o obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o @@ -48,12 +48,6 @@ obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o # i.MX21 based machines obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o -# i.MX25 based machines -obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o -obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o - # i.MX27 based machines obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index 59c0c8558c6b..9c2633a9de9f 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -30,7 +30,6 @@ #include "clk.h" #include "common.h" #include "hardware.h" -#include "mx25.h" #define CCM_MPCTL 0x00 #define CCM_UPCTL 0x04 @@ -239,80 +238,6 @@ static int __init __mx25_clocks_init(unsigned long osc_rate, return 0; } -int __init mx25_clocks_init(void) -{ - void __iomem *ccm; - - ccm = ioremap(MX25_CRM_BASE_ADDR, SZ_16K); - - __mx25_clocks_init(24000000, ccm); - - clk_register_clkdev(clk[gpt1_ipg], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); - /* i.mx25 has the i.mx21 type uart */ - clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0"); - clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0"); - clk_register_clkdev(clk[uart2_ipg], "ipg", "imx21-uart.1"); - clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.1"); - clk_register_clkdev(clk[uart3_ipg], "ipg", "imx21-uart.2"); - clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.2"); - clk_register_clkdev(clk[uart4_ipg], "ipg", "imx21-uart.3"); - clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.3"); - clk_register_clkdev(clk[uart5_ipg], "ipg", "imx21-uart.4"); - clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.4"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); - clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.0"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1"); - clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.1"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); - clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2"); - clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); - clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27"); - clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); - clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0"); - /* i.mx25 has the i.mx35 type cspi */ - clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0"); - clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1"); - clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2"); - clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad"); - clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc"); - clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0"); - clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.1"); - clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.2"); - clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0"); - clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0"); - clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0"); - clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx21-fb.0"); - clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx21-fb.0"); - clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx21-fb.0"); - clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1"); - clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0"); - clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0"); - clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0"); - clk_register_clkdev(clk[esdhc2_ipg_per], "per", "sdhci-esdhc-imx25.1"); - clk_register_clkdev(clk[esdhc2_ipg], "ipg", "sdhci-esdhc-imx25.1"); - clk_register_clkdev(clk[esdhc2_ahb], "ahb", "sdhci-esdhc-imx25.1"); - clk_register_clkdev(clk[csi_ipg_per], "per", "imx25-camera.0"); - clk_register_clkdev(clk[csi_ipg], "ipg", "imx25-camera.0"); - clk_register_clkdev(clk[csi_ahb], "ahb", "imx25-camera.0"); - clk_register_clkdev(clk[dummy], "audmux", NULL); - clk_register_clkdev(clk[can1_ipg], NULL, "flexcan.0"); - clk_register_clkdev(clk[can2_ipg], NULL, "flexcan.1"); - /* i.mx25 has the i.mx35 type sdma */ - clk_register_clkdev(clk[sdma_ipg], "ipg", "imx35-sdma"); - clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma"); - clk_register_clkdev(clk[iim_ipg], "iim", NULL); - - mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1); - - return 0; -} - static void __init mx25_clocks_init_dt(struct device_node *np) { struct device_node *refnp; diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 1028b6c505c4..771ecfe96c14 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -23,13 +23,11 @@ struct of_device_id; void mx1_map_io(void); void mx21_map_io(void); -void mx25_map_io(void); void mx27_map_io(void); void mx31_map_io(void); void mx35_map_io(void); void imx1_init_early(void); void imx21_init_early(void); -void imx25_init_early(void); void imx27_init_early(void); void imx31_init_early(void); void imx35_init_early(void); @@ -37,13 +35,11 @@ void mxc_init_irq(void __iomem *); void tzic_init_irq(void); void mx1_init_irq(void); void mx21_init_irq(void); -void mx25_init_irq(void); void mx27_init_irq(void); void mx31_init_irq(void); void mx35_init_irq(void); void imx1_soc_init(void); void imx21_soc_init(void); -void imx25_soc_init(void); void imx27_soc_init(void); void imx31_soc_init(void); void imx35_soc_init(void); @@ -51,7 +47,6 @@ void epit_timer_init(void __iomem *base, int irq); void mxc_timer_init(void __iomem *, int); int mx1_clocks_init(unsigned long fref); int mx21_clocks_init(unsigned long lref, unsigned long fref); -int mx25_clocks_init(void); int mx27_clocks_init(unsigned long fref); int mx31_clocks_init(unsigned long fref); int mx35_clocks_init(void); diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c index 96ec64b5ff7d..d0ad67e802d3 100644 --- a/arch/arm/mach-imx/cpu-imx25.c +++ b/arch/arm/mach-imx/cpu-imx25.c @@ -11,6 +11,8 @@ */ #include <linux/module.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> #include "iim.h" #include "hardware.h" @@ -20,8 +22,15 @@ static int mx25_cpu_rev = -1; static int mx25_read_cpu_rev(void) { u32 rev; + void __iomem *iim_base; + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim"); + iim_base = of_iomap(np, 0); + BUG_ON(!iim_base); + rev = readl(iim_base + MXC_IIMSREV); + iounmap(iim_base); - rev = __raw_readl(MX25_IO_ADDRESS(MX25_IIM_BASE_ADDR + MXC_IIMSREV)); switch (rev) { case 0x00: return IMX_CHIP_REVISION_1_0; diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h deleted file mode 100644 index 61a114cddc39..000000000000 --- a/arch/arm/mach-imx/devices-imx25.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include "devices/devices-common.h" - -extern const struct imx_fec_data imx25_fec_data; -#define imx25_add_fec(pdata) \ - imx_add_fec(&imx25_fec_data, pdata) - -extern const struct imx_flexcan_data imx25_flexcan_data[]; -#define imx25_add_flexcan(id) \ - imx_add_flexcan(&imx25_flexcan_data[id]) -#define imx25_add_flexcan0() imx25_add_flexcan(0) -#define imx25_add_flexcan1() imx25_add_flexcan(1) - -extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data; -#define imx25_add_fsl_usb2_udc(pdata) \ - imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata) - -extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data; -#define imx25_add_imxdi_rtc() \ - imx_add_imxdi_rtc(&imx25_imxdi_rtc_data) - -extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data; -#define imx25_add_imx2_wdt() \ - imx_add_imx2_wdt(&imx25_imx2_wdt_data) - -extern const struct imx_imx_fb_data imx25_imx_fb_data; -#define imx25_add_imx_fb(pdata) \ - imx_add_imx_fb(&imx25_imx_fb_data, pdata) - -extern const struct imx_imx_i2c_data imx25_imx_i2c_data[]; -#define imx25_add_imx_i2c(id, pdata) \ - imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata) -#define imx25_add_imx_i2c0(pdata) imx25_add_imx_i2c(0, pdata) -#define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata) -#define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata) - -extern const struct imx_imx_keypad_data imx25_imx_keypad_data; -#define imx25_add_imx_keypad(pdata) \ - imx_add_imx_keypad(&imx25_imx_keypad_data, pdata) - -extern const struct imx_imx_ssi_data imx25_imx_ssi_data[]; -#define imx25_add_imx_ssi(id, pdata) \ - imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata) - -extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[]; -#define imx25_add_imx_uart(id, pdata) \ - imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata) -#define imx25_add_imx_uart0(pdata) imx25_add_imx_uart(0, pdata) -#define imx25_add_imx_uart1(pdata) imx25_add_imx_uart(1, pdata) -#define imx25_add_imx_uart2(pdata) imx25_add_imx_uart(2, pdata) -#define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata) -#define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata) - -extern const struct imx_mx2_camera_data imx25_mx2_camera_data; -#define imx25_add_mx2_camera(pdata) \ - imx_add_mx2_camera(&imx25_mx2_camera_data, pdata) - -extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data; -#define imx25_add_mxc_ehci_otg(pdata) \ - imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata) -extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data; -#define imx25_add_mxc_ehci_hs(pdata) \ - imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata) - -extern const struct imx_mxc_nand_data imx25_mxc_nand_data; -#define imx25_add_mxc_nand(pdata) \ - imx_add_mxc_nand(&imx25_mxc_nand_data, pdata) - -extern const struct imx_sdhci_esdhc_imx_data imx25_sdhci_esdhc_imx_data[]; -#define imx25_add_sdhci_esdhc_imx(id, pdata) \ - imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata) - -extern const struct imx_spi_imx_data imx25_cspi_data[]; -#define imx25_add_spi_imx(id, pdata) \ - imx_add_spi_imx(&imx25_cspi_data[id], pdata) -#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata) -#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata) -#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata) diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 1d2cc1805f3e..3a552989248e 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -21,9 +21,6 @@ config IMX_HAVE_PLATFORM_IMX27_CODA config IMX_HAVE_PLATFORM_IMX2_WDT bool -config IMX_HAVE_PLATFORM_IMXDI_RTC - bool - config IMX_HAVE_PLATFORM_IMX_FB bool diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index 8fdb12b4ca7e..e5cf587bc1a0 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -8,7 +8,6 @@ obj-y += platform-gpio-mxc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o obj-y += platform-imx-dma.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o diff --git a/arch/arm/mach-imx/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c index d86f9250b4ee..b403a4fe2892 100644 --- a/arch/arm/mach-imx/devices/platform-fec.c +++ b/arch/arm/mach-imx/devices/platform-fec.c @@ -19,11 +19,6 @@ .irq = soc ## _INT_FEC, \ } -#ifdef CONFIG_SOC_IMX25 -const struct imx_fec_data imx25_fec_data __initconst = - imx_fec_data_entry_single(MX25, "imx25-fec"); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_fec_data imx27_fec_data __initconst = imx_fec_data_entry_single(MX27, "imx27-fec"); diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c index 23b0061347cb..25e1de6f3a47 100644 --- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c +++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c @@ -18,11 +18,6 @@ .irq = soc ## _INT_USB_OTG, \ } -#ifdef CONFIG_SOC_IMX25 -const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst = - imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27"); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst = imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27"); diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c index 25a47c616b2d..7df6328306f9 100644 --- a/arch/arm/mach-imx/devices/platform-imx-fb.c +++ b/arch/arm/mach-imx/devices/platform-imx-fb.c @@ -29,11 +29,6 @@ const struct imx_imx_fb_data imx21_imx_fb_data __initconst = imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx_fb_data imx25_imx_fb_data __initconst = - imx_imx_fb_data_entry_single(MX25, "imx21-fb", SZ_16K); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx_fb_data imx27_imx_fb_data __initconst = imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K); diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c index 644ac2689882..ae9791522fc8 100644 --- a/arch/arm/mach-imx/devices/platform-imx-i2c.c +++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c @@ -31,16 +31,6 @@ const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst = imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = { -#define imx25_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX25, "imx21-i2c", _id, _hwid, SZ_16K) - imx25_imx_i2c_data_entry(0, 1), - imx25_imx_i2c_data_entry(1, 2), - imx25_imx_i2c_data_entry(2, 3), -}; -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = { #define imx27_imx_i2c_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/devices/platform-imx-keypad.c b/arch/arm/mach-imx/devices/platform-imx-keypad.c index f42200b7aca9..479e4d70dbf9 100644 --- a/arch/arm/mach-imx/devices/platform-imx-keypad.c +++ b/arch/arm/mach-imx/devices/platform-imx-keypad.c @@ -21,11 +21,6 @@ const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst = imx_imx_keypad_data_entry_single(MX21, SZ_16); #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst = - imx_imx_keypad_data_entry_single(MX25, SZ_16K); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst = imx_imx_keypad_data_entry_single(MX27, SZ_16); diff --git a/arch/arm/mach-imx/devices/platform-imx-ssi.c b/arch/arm/mach-imx/devices/platform-imx-ssi.c index 1c7c721ebff1..6f0e94eb29ee 100644 --- a/arch/arm/mach-imx/devices/platform-imx-ssi.c +++ b/arch/arm/mach-imx/devices/platform-imx-ssi.c @@ -30,15 +30,6 @@ const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = { -#define imx25_imx_ssi_data_entry(_id, _hwid) \ - imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K) - imx25_imx_ssi_data_entry(0, 1), - imx25_imx_ssi_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = { #define imx27_imx_ssi_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c index 8c01836bc1d4..6962cff4a950 100644 --- a/arch/arm/mach-imx/devices/platform-imx-uart.c +++ b/arch/arm/mach-imx/devices/platform-imx-uart.c @@ -47,18 +47,6 @@ const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = { }; #endif -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = { -#define imx25_imx_uart_data_entry(_id, _hwid) \ - imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K) - imx25_imx_uart_data_entry(0, 1), - imx25_imx_uart_data_entry(1, 2), - imx25_imx_uart_data_entry(2, 3), - imx25_imx_uart_data_entry(3, 4), - imx25_imx_uart_data_entry(4, 5), -}; -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = { #define imx27_imx_uart_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/devices/platform-imx2-wdt.c b/arch/arm/mach-imx/devices/platform-imx2-wdt.c index 54f63bc25ca4..8c134c8d7500 100644 --- a/arch/arm/mach-imx/devices/platform-imx2-wdt.c +++ b/arch/arm/mach-imx/devices/platform-imx2-wdt.c @@ -25,11 +25,6 @@ const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst = imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst = - imx_imx2_wdt_data_entry_single(MX25, 0, , SZ_16K); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst = imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K); diff --git a/arch/arm/mach-imx/devices/platform-imxdi_rtc.c b/arch/arm/mach-imx/devices/platform-imxdi_rtc.c deleted file mode 100644 index 5bb490d556ea..000000000000 --- a/arch/arm/mach-imx/devices/platform-imxdi_rtc.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include <asm/sizes.h> - -#include "../hardware.h" -#include "devices-common.h" - -#define imx_imxdi_rtc_data_entry_single(soc) \ - { \ - .iobase = soc ## _DRYICE_BASE_ADDR, \ - .irq = soc ## _INT_DRYICE, \ - } - -#ifdef CONFIG_SOC_IMX25 -const struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst = - imx_imxdi_rtc_data_entry_single(MX25); -#endif /* ifdef CONFIG_SOC_IMX25 */ - -struct platform_device *__init imx_add_imxdi_rtc( - const struct imx_imxdi_rtc_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device("imxdi_rtc", 0, - res, ARRAY_SIZE(res), NULL, 0); -} diff --git a/arch/arm/mach-imx/devices/platform-mx2-camera.c b/arch/arm/mach-imx/devices/platform-mx2-camera.c index b53e1f348f51..4c377c33242c 100644 --- a/arch/arm/mach-imx/devices/platform-mx2-camera.c +++ b/arch/arm/mach-imx/devices/platform-mx2-camera.c @@ -27,11 +27,6 @@ .irqemmaprp = soc ## _INT_EMMAPRP, \ } -#ifdef CONFIG_SOC_IMX25 -const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst = - imx_mx2_camera_data_entry_single(MX25, "imx25-camera"); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst = imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera"); diff --git a/arch/arm/mach-imx/devices/platform-mxc-ehci.c b/arch/arm/mach-imx/devices/platform-mxc-ehci.c index 296353662ff0..4537abd2a8f2 100644 --- a/arch/arm/mach-imx/devices/platform-mxc-ehci.c +++ b/arch/arm/mach-imx/devices/platform-mxc-ehci.c @@ -18,13 +18,6 @@ .irq = soc ## _INT_USB_ ## hs, \ } -#ifdef CONFIG_SOC_IMX25 -const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst = - imx_mxc_ehci_data_entry_single(MX25, 0, OTG); -const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst = - imx_mxc_ehci_data_entry_single(MX25, 1, HS); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst = imx_mxc_ehci_data_entry_single(MX27, 0, OTG); diff --git a/arch/arm/mach-imx/devices/platform-mxc_nand.c b/arch/arm/mach-imx/devices/platform-mxc_nand.c index fa618a34f462..676df4920c7b 100644 --- a/arch/arm/mach-imx/devices/platform-mxc_nand.c +++ b/arch/arm/mach-imx/devices/platform-mxc_nand.c @@ -34,11 +34,6 @@ const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst = imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ -#ifdef CONFIG_SOC_IMX25 -const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX25, "imx25-nand", SZ_8K); -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst = imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K); diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c index aca825d74c48..5e9707b47f92 100644 --- a/arch/arm/mach-imx/devices/platform-spi_imx.c +++ b/arch/arm/mach-imx/devices/platform-spi_imx.c @@ -39,17 +39,6 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { }; #endif -#ifdef CONFIG_SOC_IMX25 -/* i.mx25 has the i.mx35 type cspi */ -const struct imx_spi_imx_data imx25_cspi_data[] __initconst = { -#define imx25_cspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX25, CSPI, "imx35-cspi", _id, _hwid, SZ_16K) - imx25_cspi_data_entry(0, 1), - imx25_cspi_data_entry(1, 2), - imx25_cspi_data_entry(2, 3), -}; -#endif /* ifdef CONFIG_SOC_IMX25 */ - #ifdef CONFIG_SOC_IMX27 const struct imx_spi_imx_data imx27_cspi_data[] __initconst = { #define imx27_cspi_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c deleted file mode 100644 index 42a5a3d14c5f..000000000000 --- a/arch/arm/mach-imx/ehci-imx25.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> - * Copyright (C) 2010 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - */ - -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/platform_data/usb-ehci-mxc.h> - -#include "ehci.h" -#include "hardware.h" - -#define USBCTRL_OTGBASE_OFFSET 0x600 - -#define MX25_OTG_SIC_SHIFT 29 -#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT) -#define MX25_OTG_PM_BIT (1 << 24) -#define MX25_OTG_PP_BIT (1 << 11) -#define MX25_OTG_OCPOL_BIT (1 << 3) - -#define MX25_H1_SIC_SHIFT 21 -#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) -#define MX25_H1_PP_BIT (1 << 18) -#define MX25_H1_PM_BIT (1 << 16) -#define MX25_H1_IPPUE_UP_BIT (1 << 7) -#define MX25_H1_IPPUE_DOWN_BIT (1 << 6) -#define MX25_H1_TLL_BIT (1 << 5) -#define MX25_H1_USBTE_BIT (1 << 4) -#define MX25_H1_OCPOL_BIT (1 << 2) - -int mx25_initialize_usb_hw(int port, unsigned int flags) -{ - unsigned int v; - - v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); - - switch (port) { - case 0: /* OTG port */ - v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT | - MX25_OTG_OCPOL_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX25_OTG_PM_BIT; - - if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) - v |= MX25_OTG_PP_BIT; - - if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) - v |= MX25_OTG_OCPOL_BIT; - - break; - case 1: /* H1 port */ - v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT | - MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT | - MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX25_H1_PM_BIT; - - if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) - v |= MX25_H1_PP_BIT; - - if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) - v |= MX25_H1_OCPOL_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX25_H1_TLL_BIT; - - if (flags & MXC_EHCI_INTERNAL_PHY) - v |= MX25_H1_USBTE_BIT; - - if (flags & MXC_EHCI_IPPUE_DOWN) - v |= MX25_H1_IPPUE_DOWN_BIT; - - if (flags & MXC_EHCI_IPPUE_UP) - v |= MX25_H1_IPPUE_UP_BIT; - - break; - default: - return -EINVAL; - } - - writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET)); - - return 0; -} - diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c deleted file mode 100644 index e77cc3af6db2..000000000000 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ /dev/null @@ -1,310 +0,0 @@ -/* - * Copyright (C) 2010 Eric Benard - eric@eukrea.com - * - * Based on pcm970-baseboard.c which is : - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/spi/spi.h> -#include <video/platform_lcd.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" -#include "devices-imx25.h" -#include "hardware.h" -#include "iomux-mx25.h" -#include "mx25.h" - -static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { - /* LCD */ - MX25_PAD_LD0__LD0, - MX25_PAD_LD1__LD1, - MX25_PAD_LD2__LD2, - MX25_PAD_LD3__LD3, - MX25_PAD_LD4__LD4, - MX25_PAD_LD5__LD5, - MX25_PAD_LD6__LD6, - MX25_PAD_LD7__LD7, - MX25_PAD_LD8__LD8, - MX25_PAD_LD9__LD9, - MX25_PAD_LD10__LD10, - MX25_PAD_LD11__LD11, - MX25_PAD_LD12__LD12, - MX25_PAD_LD13__LD13, - MX25_PAD_LD14__LD14, - MX25_PAD_LD15__LD15, - MX25_PAD_GPIO_E__LD16, - MX25_PAD_GPIO_F__LD17, - MX25_PAD_HSYNC__HSYNC, - MX25_PAD_VSYNC__VSYNC, - MX25_PAD_LSCLK__LSCLK, - MX25_PAD_OE_ACD__OE_ACD, - MX25_PAD_CONTRAST__CONTRAST, - /* LCD_PWR */ - MX25_PAD_PWM__GPIO_1_26, - /* LED */ - MX25_PAD_POWER_FAIL__GPIO_3_19, - /* SWITCH */ - MX25_PAD_VSTBY_ACK__GPIO_3_18, - /* UART2 */ - MX25_PAD_UART2_RTS__UART2_RTS, - MX25_PAD_UART2_CTS__UART2_CTS, - MX25_PAD_UART2_TXD__UART2_TXD, - MX25_PAD_UART2_RXD__UART2_RXD, - /* SD1 */ - MX25_PAD_SD1_CMD__SD1_CMD, - MX25_PAD_SD1_CLK__SD1_CLK, - MX25_PAD_SD1_DATA0__SD1_DATA0, - MX25_PAD_SD1_DATA1__SD1_DATA1, - MX25_PAD_SD1_DATA2__SD1_DATA2, - MX25_PAD_SD1_DATA3__SD1_DATA3, - /* SD1 CD */ - MX25_PAD_DE_B__GPIO_2_20, - /* I2S */ - MX25_PAD_KPP_COL3__AUD5_TXFS, - MX25_PAD_KPP_COL2__AUD5_TXC, - MX25_PAD_KPP_COL1__AUD5_RXD, - MX25_PAD_KPP_COL0__AUD5_TXD, - /* CAN */ - MX25_PAD_GPIO_D__CAN2_RX, - MX25_PAD_GPIO_C__CAN2_TX, - /* SPI1 */ - MX25_PAD_CSPI1_MOSI__CSPI1_MOSI, - MX25_PAD_CSPI1_MISO__CSPI1_MISO, - MX25_PAD_CSPI1_SS0__GPIO_1_16, - MX25_PAD_CSPI1_SS1__GPIO_1_17, - MX25_PAD_CSPI1_SCLK__CSPI1_SCLK, - MX25_PAD_CSPI1_RDY__GPIO_2_22, -}; - -#define GPIO_LED1 IMX_GPIO_NR(3, 19) -#define GPIO_SWITCH1 IMX_GPIO_NR(3, 18) -#define GPIO_SD1CD IMX_GPIO_NR(2, 20) -#define GPIO_LCDPWR IMX_GPIO_NR(1, 26) -#define GPIO_SPI1_SS0 IMX_GPIO_NR(1, 16) -#define GPIO_SPI1_SS1 IMX_GPIO_NR(1, 17) -#define GPIO_SPI1_IRQ IMX_GPIO_NR(2, 22) - -static struct imx_fb_videomode eukrea_mximxsd_modes[] = { - { - .mode = { - .name = "CMO-QVGA", - .refresh = 60, - .xres = 320, - .yres = 240, - .pixclock = KHZ2PICOS(6500), - .left_margin = 30, - .right_margin = 38, - .upper_margin = 20, - .lower_margin = 3, - .hsync_len = 15, - .vsync_len = 4, - }, - .bpp = 16, - .pcr = 0xCAD08B80, - }, { - .mode = { - .name = "DVI-VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 32000, - .hsync_len = 7, - .left_margin = 100, - .right_margin = 100, - .vsync_len = 7, - .upper_margin = 7, - .lower_margin = 100, - }, - .pcr = 0xFA208B80, - .bpp = 16, - }, { - .mode = { - .name = "DVI-SVGA", - .refresh = 60, - .xres = 800, - .yres = 600, - .pixclock = 25000, - .hsync_len = 7, - .left_margin = 75, - .right_margin = 75, - .vsync_len = 7, - .upper_margin = 7, - .lower_margin = 75, - }, - .pcr = 0xFA208B80, - .bpp = 16, - }, -}; - -static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = { - .mode = eukrea_mximxsd_modes, - .num_modes = ARRAY_SIZE(eukrea_mximxsd_modes), - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00040060, -}; - -static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) - gpio_direction_output(GPIO_LCDPWR, 1); - else - gpio_direction_output(GPIO_LCDPWR, 0); -} - -static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = { - .set_power = eukrea_mbimxsd_lcd_power_set, -}; - -static struct platform_device eukrea_mbimxsd_lcd_powerdev = { - .name = "platform-lcd", - .dev.platform_data = &eukrea_mbimxsd_lcd_power_data, -}; - -static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = { - { - .name = "led1", - .default_trigger = "heartbeat", - .active_low = 1, - .gpio = GPIO_LED1, - }, -}; - -static const struct gpio_led_platform_data - eukrea_mbimxsd_led_info __initconst = { - .leds = eukrea_mbimxsd_leds, - .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds), -}; - -static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { - { - .gpio = GPIO_SWITCH1, - .code = BTN_0, - .desc = "BP1", - .active_low = 1, - .wakeup = 1, - }, -}; - -static const struct gpio_keys_platform_data - eukrea_mbimxsd_button_data __initconst = { - .buttons = eukrea_mbimxsd_gpio_buttons, - .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons), -}; - -static struct platform_device *platform_devices[] __initdata = { - &eukrea_mbimxsd_lcd_powerdev, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, -}; - -static const -struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { - .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, -}; - -static struct esdhc_platform_data sd1_pdata = { - .cd_gpio = GPIO_SD1CD, - .cd_type = ESDHC_CD_GPIO, - .wp_type = ESDHC_WP_NONE, -}; - -static struct spi_board_info eukrea_mbimxsd25_spi_board_info[] __initdata = { - { - .modalias = "spidev", - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_0, - }, - { - .modalias = "spidev", - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 1, - .mode = SPI_MODE_0, - }, -}; - -static int eukrea_mbimxsd25_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1}; - -static const struct spi_imx_master eukrea_mbimxsd25_spi0_data __initconst = { - .chipselect = eukrea_mbimxsd25_spi_cs, - .num_chipselect = ARRAY_SIZE(eukrea_mbimxsd25_spi_cs), -}; - -/* - * system init for baseboard usage. Will be called by cpuimx25 init. - * - * Add platform devices present on this baseboard and init - * them from CPU side as far as required to use them later on - */ -void __init eukrea_mbimxsd25_baseboard_init(void) -{ - if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads, - ARRAY_SIZE(eukrea_mbimxsd_pads))) - printk(KERN_ERR "error setting mbimxsd pads !\n"); - - imx25_add_imx_uart1(&uart_pdata); - imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata); - imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); - - imx25_add_flexcan1(); - imx25_add_sdhci_esdhc_imx(0, &sd1_pdata); - - gpio_request(GPIO_LED1, "LED1"); - gpio_direction_output(GPIO_LED1, 1); - gpio_free(GPIO_LED1); - - gpio_request(GPIO_SWITCH1, "SWITCH1"); - gpio_direction_input(GPIO_SWITCH1); - gpio_free(GPIO_SWITCH1); - - gpio_request(GPIO_LCDPWR, "LCDPWR"); - gpio_direction_output(GPIO_LCDPWR, 1); - - i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices, - ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); - - gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ"); - gpio_direction_input(GPIO_SPI1_IRQ); - gpio_free(GPIO_SPI1_IRQ); - imx25_add_spi_imx0(&eukrea_mbimxsd25_spi0_data); - spi_register_board_info(eukrea_mbimxsd25_spi_board_info, - ARRAY_SIZE(eukrea_mbimxsd25_spi_board_info)); - - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); - imx_add_gpio_keys(&eukrea_mbimxsd_button_data); - imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); -} diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index 14d6c8249b76..6edc940e0865 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -100,7 +100,7 @@ static struct mx3fb_platform_data mx3fb_pdata __initdata = { .num_modes = ARRAY_SIZE(fb_modedb), }; -static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { +static const iomux_v3_cfg_t eukrea_mbimxsd_pads[] __initconst = { /* LCD */ MX35_PAD_LD0__IPU_DISPB_DAT_0, MX35_PAD_LD1__IPU_DISPB_DAT_1, diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index 66b2b564c463..76af2c03c241 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -112,7 +112,6 @@ #include "mx21.h" #include "mx27.h" #include "mx1.h" -#include "mx25.h" #define imx_map_entry(soc, name, _type) { \ .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ diff --git a/arch/arm/mach-imx/iomux-mx25.h b/arch/arm/mach-imx/iomux-mx25.h deleted file mode 100644 index be51e838375c..000000000000 --- a/arch/arm/mach-imx/iomux-mx25.h +++ /dev/null @@ -1,524 +0,0 @@ -/* - * arch/arm/plat-mxc/include/mach/iomux-mx25.h - * - * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de> - * - * based on arch/arm/mach-mx25/mx25_pins.h - * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. - * and - * arch/arm/plat-mxc/include/mach/iomux-mx35.h - * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ -#ifndef __MACH_IOMUX_MX25_H__ -#define __MACH_IOMUX_MX25_H__ - -#include "iomux-v3.h" - -/* - * IOMUX/PAD Bit field definitions - */ - -#define MX25_PAD_A10__A10 IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A10__GPIO_4_0 IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A13__A13 IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A13__GPIO_4_1 IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A14__A14 IOMUX_PAD(0x230, 0x010, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A14__GPIO_2_0 IOMUX_PAD(0x230, 0x010, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A15__A15 IOMUX_PAD(0x234, 0x014, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A15__GPIO_2_1 IOMUX_PAD(0x234, 0x014, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A16__A16 IOMUX_PAD(0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A16__GPIO_2_2 IOMUX_PAD(0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A17__A17 IOMUX_PAD(0x238, 0x01c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A17__GPIO_2_3 IOMUX_PAD(0x238, 0x01c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A18__A18 IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A18__GPIO_2_4 IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL) - -#define MX25_PAD_A19__A19 IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL) -#define MX25_PAD_A19__GPIO_2_5 IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A20__A20 IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A20__GPIO_2_6 IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL) - -#define MX25_PAD_A21__A21 IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A21__GPIO_2_7 IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL) - -#define MX25_PAD_A22__A22 IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A22__GPIO_2_8 IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A23__A23 IOMUX_PAD(0x24c, 0x034, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A23__GPIO_2_9 IOMUX_PAD(0x24c, 0x034, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_A24__A24 IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A24__GPIO_2_10 IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL) - -#define MX25_PAD_A25__A25 IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A25__GPIO_2_11 IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL) - -#define MX25_PAD_EB0__EB0 IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_EB0__AUD4_TXD IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL) -#define MX25_PAD_EB0__GPIO_2_12 IOMUX_PAD(0x258, 0x040, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_EB1__EB1 IOMUX_PAD(0x25c, 0x044, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_EB1__AUD4_RXD IOMUX_PAD(0x25c, 0x044, 0x14, 0x460, 0, NO_PAD_CTRL) -#define MX25_PAD_EB1__GPIO_2_13 IOMUX_PAD(0x25c, 0x044, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_OE__OE IOMUX_PAD(0x260, 0x048, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_OE__AUD4_TXC IOMUX_PAD(0x260, 0x048, 0x14, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_OE__GPIO_2_14 IOMUX_PAD(0x260, 0x048, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CS0__CS0 IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CS0__GPIO_4_2 IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CS1__CS1 IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CS1__NF_CE3 IOMUX_PAD(0x000, 0x050, 0x01, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CS1__GPIO_4_3 IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CS4__CS4 IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CS4__NF_CE1 IOMUX_PAD(0x264, 0x054, 0x01, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CS4__UART5_CTS IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CS4__GPIO_3_20 IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CS5__CS5 IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CS5__NF_CE2 IOMUX_PAD(0x268, 0x058, 0x01, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CS5__UART5_RTS IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL) -#define MX25_PAD_CS5__GPIO_3_21 IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_NF_CE0__GPIO_3_22 IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_ECB__ECB IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_ECB__UART5_TXD_MUX IOMUX_PAD(0x270, 0x060, 0x13, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_ECB__GPIO_3_23 IOMUX_PAD(0x270, 0x060, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LBA__LBA IOMUX_PAD(0x274, 0x064, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LBA__UART5_RXD_MUX IOMUX_PAD(0x274, 0x064, 0x13, 0x578, 0, NO_PAD_CTRL) -#define MX25_PAD_LBA__GPIO_3_24 IOMUX_PAD(0x274, 0x064, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_BCLK__BCLK IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_BCLK__GPIO_4_4 IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_RW__RW IOMUX_PAD(0x278, 0x06c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_RW__AUD4_TXFS IOMUX_PAD(0x278, 0x06c, 0x14, 0x474, 0, NO_PAD_CTRL) -#define MX25_PAD_RW__GPIO_3_25 IOMUX_PAD(0x278, 0x06c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_NFWE_B__NFWE_B IOMUX_PAD(0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_NFWE_B__GPIO_3_26 IOMUX_PAD(0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_NFRE_B__NFRE_B IOMUX_PAD(0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_NFRE_B__GPIO_3_27 IOMUX_PAD(0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_NFALE__NFALE IOMUX_PAD(0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_NFALE__GPIO_3_28 IOMUX_PAD(0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_NFCLE__NFCLE IOMUX_PAD(0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_NFCLE__GPIO_3_29 IOMUX_PAD(0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_NFWP_B__NFWP_B IOMUX_PAD(0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_NFWP_B__GPIO_3_30 IOMUX_PAD(0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_NFRB__NFRB IOMUX_PAD(0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PKE) -#define MX25_PAD_NFRB__GPIO_3_31 IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D15__D15 IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D15__LD16 IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_D15__GPIO_4_5 IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D14__D14 IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D14__LD17 IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_D14__GPIO_4_6 IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D13__D13 IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D13__LD18 IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_D13__GPIO_4_7 IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D12__D12 IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D12__GPIO_4_8 IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D11__D11 IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D11__GPIO_4_9 IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D10__D10 IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D10__GPIO_4_10 IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D10__USBOTG_OC IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP) - -#define MX25_PAD_D9__D9 IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D9__GPIO_4_11 IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D9__USBH2_PWR IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE) - -#define MX25_PAD_D8__D8 IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D8__GPIO_4_12 IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D8__USBH2_OC IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP) - -#define MX25_PAD_D7__D7 IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D7__GPIO_4_13 IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D6__D6 IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D6__GPIO_4_14 IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D5__D5 IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D5__GPIO_4_15 IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D4__D4 IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D4__GPIO_4_16 IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D3__D3 IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D3__GPIO_4_17 IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D2__D2 IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D2__GPIO_4_18 IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D1__D1 IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D1__GPIO_4_19 IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_D0__D0 IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_D0__GPIO_4_20 IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD0__LD0 IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD0__CSI_D0 IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL) -#define MX25_PAD_LD0__GPIO_2_15 IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD1__LD1 IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD1__CSI_D1 IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL) -#define MX25_PAD_LD1__GPIO_2_16 IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD2__LD2 IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD2__GPIO_2_17 IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD3__LD3 IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD3__GPIO_2_18 IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD4__LD4 IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD4__GPIO_2_19 IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD5__LD5 IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD5__GPIO_1_19 IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD6__LD6 IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD6__GPIO_1_20 IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD7__LD7 IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD7__GPIO_1_21 IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL) - -#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL) - -#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL) - -#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL) - -#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL) - -#define MX25_PAD_HSYNC__HSYNC IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_HSYNC__GPIO_1_22 IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_VSYNC__VSYNC IOMUX_PAD(0x304, 0x10c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_VSYNC__GPIO_1_23 IOMUX_PAD(0x304, 0x10c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_LSCLK__LSCLK IOMUX_PAD(0x308, 0x110, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_LSCLK__GPIO_1_24 IOMUX_PAD(0x308, 0x110, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_OE_ACD__OE_ACD IOMUX_PAD(0x30c, 0x114, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_OE_ACD__GPIO_1_25 IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CONTRAST__CONTRAST IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CONTRAST__PWM4_PWMO IOMUX_PAD(0x310, 0x118, 0x14, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL) - -#define MX25_PAD_PWM__PWM IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_PWM__GPIO_1_26 IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_PWM__USBH2_OC IOMUX_PAD(0x314, 0x11c, 0x16, 0x580, 1, PAD_CTL_PUS_100K_UP) - -#define MX25_PAD_CSI_D2__CSI_D2 IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D2__UART5_RXD_MUX IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL) -#define MX25_PAD_CSI_D2__GPIO_1_27 IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D2__CSPI3_MOSI IOMUX_PAD(0x318, 0x120, 0x17, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_D3__CSI_D3 IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D3__GPIO_1_28 IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D3__CSPI3_MISO IOMUX_PAD(0x31c, 0x124, 0x17, 0x4b4, 1, NO_PAD_CTRL) - -#define MX25_PAD_CSI_D4__CSI_D4 IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D4__UART5_RTS IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL) -#define MX25_PAD_CSI_D4__GPIO_1_29 IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D4__CSPI3_SCLK IOMUX_PAD(0x320, 0x128, 0x17, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_D5__CSI_D5 IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D5__GPIO_1_30 IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D5__CSPI3_RDY IOMUX_PAD(0x324, 0x12c, 0x17, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_D6__CSI_D6 IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D6__GPIO_1_31 IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_D7__CSI_D7 IOMUX_PAD(0x32c, 0x134, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D7__GPIO_1_6 IOMUX_PAD(0x32c, 0x134, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_D8__CSI_D8 IOMUX_PAD(0x330, 0x138, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D8__GPIO_1_7 IOMUX_PAD(0x330, 0x138, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_D9__CSI_D9 IOMUX_PAD(0x334, 0x13c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_D9__GPIO_4_21 IOMUX_PAD(0x334, 0x13c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_MCLK__CSI_MCLK IOMUX_PAD(0x338, 0x140, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_MCLK__GPIO_1_8 IOMUX_PAD(0x338, 0x140, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_VSYNC__CSI_VSYNC IOMUX_PAD(0x33c, 0x144, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_VSYNC__GPIO_1_9 IOMUX_PAD(0x33c, 0x144, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_HSYNC__CSI_HSYNC IOMUX_PAD(0x340, 0x148, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_HSYNC__GPIO_1_10 IOMUX_PAD(0x340, 0x148, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK IOMUX_PAD(0x344, 0x14c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 IOMUX_PAD(0x344, 0x14c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_I2C1_CLK__I2C1_CLK IOMUX_PAD(0x348, 0x150, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_I2C1_CLK__GPIO_1_12 IOMUX_PAD(0x348, 0x150, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_I2C1_DAT__I2C1_DAT IOMUX_PAD(0x34c, 0x154, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_I2C1_DAT__GPIO_1_13 IOMUX_PAD(0x34c, 0x154, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x350, 0x158, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 IOMUX_PAD(0x350, 0x158, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x354, 0x15c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSPI1_MISO__GPIO_1_15 IOMUX_PAD(0x354, 0x15c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x358, 0x160, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSPI1_SS0__GPIO_1_16 IOMUX_PAD(0x358, 0x160, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x35c, 0x164, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSPI1_SS1__GPIO_1_17 IOMUX_PAD(0x35c, 0x164, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x360, 0x168, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 IOMUX_PAD(0x360, 0x168, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CSPI1_RDY__CSPI1_RDY IOMUX_PAD(0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PKE) -#define MX25_PAD_CSPI1_RDY__GPIO_2_22 IOMUX_PAD(0x364, 0x16c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x368, 0x170, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN) -#define MX25_PAD_UART1_RXD__GPIO_4_22 IOMUX_PAD(0x368, 0x170, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x36c, 0x174, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UART1_TXD__GPIO_4_23 IOMUX_PAD(0x36c, 0x174, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x370, 0x178, 0x10, 0, 0, PAD_CTL_PUS_100K_UP) -#define MX25_PAD_UART1_RTS__CSI_D0 IOMUX_PAD(0x370, 0x178, 0x11, 0x488, 1, NO_PAD_CTRL) -#define MX25_PAD_UART1_RTS__GPIO_4_24 IOMUX_PAD(0x370, 0x178, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PUS_100K_UP) -#define MX25_PAD_UART1_CTS__CSI_D1 IOMUX_PAD(0x374, 0x17c, 0x11, 0x48c, 1, NO_PAD_CTRL) -#define MX25_PAD_UART1_CTS__GPIO_4_25 IOMUX_PAD(0x374, 0x17c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x378, 0x180, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UART2_RXD__GPIO_4_26 IOMUX_PAD(0x378, 0x180, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x37c, 0x184, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UART2_TXD__GPIO_4_27 IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL) -#define MX25_PAD_UART2_RTS__GPIO_4_28 IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL) -#define MX25_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UART2_CTS__GPIO_4_29 IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL) -#define MX25_PAD_SD1_CMD__GPIO_2_23 IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL) -#define MX25_PAD_SD1_CLK__GPIO_2_24 IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_DATA0__GPIO_2_25 IOMUX_PAD(0x390, 0x198, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_DATA1__AUD7_RXD IOMUX_PAD(0x394, 0x19c, 0x13, 0x478, 0, NO_PAD_CTRL) -#define MX25_PAD_SD1_DATA1__GPIO_2_26 IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL) -#define MX25_PAD_SD1_DATA2__GPIO_2_27 IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP) -#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL) -#define MX25_PAD_SD1_DATA3__GPIO_2_28 IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL) - -#define KPP_CTL_ROW (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP) -#define KPP_CTL_COL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) - -#define MX25_PAD_KPP_ROW0__KPP_ROW0 IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, KPP_CTL_ROW) -#define MX25_PAD_KPP_ROW0__GPIO_2_29 IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_KPP_ROW1__KPP_ROW1 IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, KPP_CTL_ROW) -#define MX25_PAD_KPP_ROW1__GPIO_2_30 IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_KPP_ROW2__KPP_ROW2 IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, KPP_CTL_ROW) -#define MX25_PAD_KPP_ROW2__CSI_D0 IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL) -#define MX25_PAD_KPP_ROW2__GPIO_2_31 IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_KPP_ROW3__KPP_ROW3 IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, KPP_CTL_ROW) -#define MX25_PAD_KPP_ROW3__CSI_LD1 IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL) -#define MX25_PAD_KPP_ROW3__GPIO_3_0 IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_KPP_COL0__KPP_COL0 IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, KPP_CTL_COL) -#define MX25_PAD_KPP_COL0__UART4_RXD_MUX IOMUX_PAD(0x3b0, 0x1b8, 0x11, 0x570, 1, NO_PAD_CTRL) -#define MX25_PAD_KPP_COL0__AUD5_TXD IOMUX_PAD(0x3b0, 0x1b8, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) -#define MX25_PAD_KPP_COL0__GPIO_3_1 IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_KPP_COL1__KPP_COL1 IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, KPP_CTL_COL) -#define MX25_PAD_KPP_COL1__UART4_TXD_MUX IOMUX_PAD(0x3b4, 0x1bc, 0x11, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_COL1__AUD5_RXD IOMUX_PAD(0x3b4, 0x1bc, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) -#define MX25_PAD_KPP_COL1__GPIO_3_2 IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_KPP_COL2__KPP_COL2 IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, KPP_CTL_COL) -#define MX25_PAD_KPP_COL2__UART4_RTS IOMUX_PAD(0x3b8, 0x1c0, 0x11, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_COL2__AUD5_TXC IOMUX_PAD(0x3b8, 0x1c0, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) -#define MX25_PAD_KPP_COL2__GPIO_3_3 IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, KPP_CTL_COL) -#define MX25_PAD_KPP_COL3__UART4_CTS IOMUX_PAD(0x3bc, 0x1c4, 0x11, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_KPP_COL3__AUD5_TXFS IOMUX_PAD(0x3bc, 0x1c4, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) -#define MX25_PAD_KPP_COL3__GPIO_3_4 IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_MDC__AUD4_TXD IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL) -#define MX25_PAD_FEC_MDC__GPIO_3_5 IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP) -#define MX25_PAD_FEC_MDIO__AUD4_RXD IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL) -#define MX25_PAD_FEC_MDIO__GPIO_3_6 IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_TDATA0__GPIO_3_7 IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_TDATA1__AUD4_TXFS IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL) -#define MX25_PAD_FEC_TDATA1__GPIO_3_8 IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_FEC_TX_EN__GPIO_3_9 IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL) -#define MX25_PAD_FEC_RDATA0__GPIO_3_10 IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL) -#define MX25_PAD_FEC_RDATA1__GPIO_3_11 IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL) -#define MX25_PAD_FEC_RX_DV__CAN2_RX IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP) -#define MX25_PAD_FEC_RX_DV__GPIO_3_12 IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN) -#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 IOMUX_PAD(0x3e0, 0x1e8, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_RTCK__RTCK IOMUX_PAD(0x3e4, 0x1ec, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_RTCK__OWIRE IOMUX_PAD(0x3e4, 0x1ec, 0x11, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_RTCK__GPIO_3_14 IOMUX_PAD(0x3e4, 0x1ec, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_DE_B__DE_B IOMUX_PAD(0x3ec, 0x1f0, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_DE_B__GPIO_2_20 IOMUX_PAD(0x3ec, 0x1f0, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_TDO__TDO IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_GPIO_A__GPIO_A IOMUX_PAD(0x3f0, 0x1f4, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_A__CAN1_TX IOMUX_PAD(0x3f0, 0x1f4, 0x16, 0, 0, PAD_CTL_PUS_22K_UP) -#define MX25_PAD_GPIO_A__USBOTG_PWR IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE) - -#define MX25_PAD_GPIO_B__GPIO_B IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_B__CAN1_RX IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K_UP) -#define MX25_PAD_GPIO_B__USBOTG_OC IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP) - -#define MX25_PAD_GPIO_C__GPIO_C IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_C__CAN2_TX IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP) - -#define MX25_PAD_GPIO_D__GPIO_D IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_GPIO_D__CAN2_RX IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP) - -#define MX25_PAD_GPIO_E__GPIO_E IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, PAD_CTL_SRE_FAST) -#define MX25_PAD_GPIO_E__AUD7_TXD IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_GPIO_F__GPIO_F IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_F__AUD7_TXC IOMUX_PAD(0x404, 0x208, 0x14, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK IOMUX_PAD(0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 IOMUX_PAD(0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK IOMUX_PAD(0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 IOMUX_PAD(0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_VSTBY_REQ__VSTBY_REQ IOMUX_PAD(0x408, 0x214, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_VSTBY_REQ__AUD7_TXFS IOMUX_PAD(0x408, 0x214, 0x14, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_VSTBY_REQ__GPIO_3_17 IOMUX_PAD(0x408, 0x214, 0x15, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_VSTBY_ACK__VSTBY_ACK IOMUX_PAD(0x40c, 0x218, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_VSTBY_ACK__GPIO_3_18 IOMUX_PAD(0x40c, 0x218, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_POWER_FAIL__POWER_FAIL IOMUX_PAD(0x410, 0x21c, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_POWER_FAIL__AUD7_RXD IOMUX_PAD(0x410, 0x21c, 0x14, 0x478, 1, NO_PAD_CTRL) -#define MX25_PAD_POWER_FAIL__GPIO_3_19 IOMUX_PAD(0x410, 0x21c, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CLKO__CLKO IOMUX_PAD(0x414, 0x220, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CLKO__GPIO_2_21 IOMUX_PAD(0x414, 0x220, 0x15, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_BOOT_MODE0__GPIO_4_30 IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_BOOT_MODE1__GPIO_4_31 IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL) - -#define MX25_PAD_CTL_GRP_DVS_MISC IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_FEC IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DVS_JTAG IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_NFC IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_CSI IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_WEIM IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_DDR IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DVS_CRM IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_KPP IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_SDHC1 IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_LCD IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_UART IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DVS_NFC IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DVS_CSI IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DSE_CSPI1 IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DDRTYPE IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DVS_SDHC1 IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_CTL_GRP_DVS_LCD IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL) - -#endif /* __MACH_IOMUX_MX25_H__ */ diff --git a/arch/arm/mach-imx/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h index 0a5adba61e0b..2e4a0ddca76c 100644 --- a/arch/arm/mach-imx/iomux-mx3.h +++ b/arch/arm/mach-imx/iomux-mx3.h @@ -114,7 +114,7 @@ enum iomux_gp_func { */ int mxc_iomux_alloc_pin(unsigned int pin, const char *label); /* - * setups mutliple pins + * setups multiple pins * convenient way to call the above function with tables */ int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count, diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c index d61f9606fc56..a53b2e64f98d 100644 --- a/arch/arm/mach-imx/iomux-v3.c +++ b/arch/arm/mach-imx/iomux-v3.c @@ -56,9 +56,10 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad) return 0; } -int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count) +int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list, + unsigned count) { - iomux_v3_cfg_t *p = pad_list; + const iomux_v3_cfg_t *p = pad_list; int i; int ret; diff --git a/arch/arm/mach-imx/iomux-v3.h b/arch/arm/mach-imx/iomux-v3.h index 2fa3b5430102..f79e165a3b3c 100644 --- a/arch/arm/mach-imx/iomux-v3.h +++ b/arch/arm/mach-imx/iomux-v3.h @@ -128,10 +128,11 @@ typedef u64 iomux_v3_cfg_t; int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad); /* - * setups mutliple pads + * setups multiple pads * convenient way to call the above function with tables */ -int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count); +int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list, + unsigned count); /* * Initialise the iomux controller diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 62a6e02f4763..922ffd6ca039 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -75,7 +75,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { }, }; -static iomux_v3_cfg_t eukrea_cpuimx35_pads[] = { +static const iomux_v3_cfg_t eukrea_cpuimx35_pads[] __initconst = { /* UART1 */ MX35_PAD_CTS1__UART1_CTS, MX35_PAD_RTS1__UART1_RTS, diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c deleted file mode 100644 index b2ee6e009fe4..000000000000 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de> - * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/memory.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx25.h" -#include "ehci.h" -#include "eukrea-baseboards.h" -#include "hardware.h" -#include "iomux-mx25.h" -#include "mx25.h" - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static iomux_v3_cfg_t eukrea_cpuimx25_pads[] = { - /* FEC - RMII */ - MX25_PAD_FEC_MDC__FEC_MDC, - MX25_PAD_FEC_MDIO__FEC_MDIO, - MX25_PAD_FEC_TDATA0__FEC_TDATA0, - MX25_PAD_FEC_TDATA1__FEC_TDATA1, - MX25_PAD_FEC_TX_EN__FEC_TX_EN, - MX25_PAD_FEC_RDATA0__FEC_RDATA0, - MX25_PAD_FEC_RDATA1__FEC_RDATA1, - MX25_PAD_FEC_RX_DV__FEC_RX_DV, - MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, - /* I2C1 */ - MX25_PAD_I2C1_CLK__I2C1_CLK, - MX25_PAD_I2C1_DAT__I2C1_DAT, -}; - -static const struct fec_platform_data mx25_fec_pdata __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static const struct mxc_nand_platform_data -eukrea_cpuimx25_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -static const struct imxi2c_platform_data -eukrea_cpuimx25_i2c0_data __initconst = { - .bitrate = 100000, -}; - -static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, -}; - -static int eukrea_cpuimx25_otg_init(struct platform_device *pdev) -{ - return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static const struct mxc_usbh_platform_data otg_pdata __initconst = { - .init = eukrea_cpuimx25_otg_init, - .portsc = MXC_EHCI_MODE_UTMI, -}; - -static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev) -{ - return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | - MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN); -} - -static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { - .init = eukrea_cpuimx25_usbh2_init, - .portsc = MXC_EHCI_MODE_SERIAL, -}; - -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI, - .workaround = FLS_USB2_WORKAROUND_ENGCM09152, -}; - -static bool otg_mode_host __initdata; - -static int __init eukrea_cpuimx25_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", eukrea_cpuimx25_otg_mode); - -static void __init eukrea_cpuimx25_init(void) -{ - imx25_soc_init(); - - if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads, - ARRAY_SIZE(eukrea_cpuimx25_pads))) - printk(KERN_ERR "error setting cpuimx25 pads !\n"); - - imx25_add_imx_uart0(&uart_pdata); - imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info); - imx25_add_imxdi_rtc(); - imx25_add_fec(&mx25_fec_pdata); - imx25_add_imx2_wdt(); - - i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices, - ARRAY_SIZE(eukrea_cpuimx25_i2c_devices)); - imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data); - - if (otg_mode_host) - imx25_add_mxc_ehci_otg(&otg_pdata); - else - imx25_add_fsl_usb2_udc(&otg_device_pdata); - - imx25_add_mxc_ehci_hs(&usbh2_pdata); - -#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD - eukrea_mbimxsd25_baseboard_init(); -#endif -} - -static void __init eukrea_cpuimx25_timer_init(void) -{ - mx25_clocks_init(); -} - -MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25") - /* Maintainer: Eukrea Electromatique */ - .atag_offset = 0x100, - .map_io = mx25_map_io, - .init_early = imx25_init_early, - .init_irq = mx25_init_irq, - .init_time = eukrea_cpuimx25_timer_init, - .init_machine = eukrea_cpuimx25_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/mach-imx25.c index 25defbdb06c4..9379fd0a7b4d 100644 --- a/arch/arm/mach-imx/imx25-dt.c +++ b/arch/arm/mach-imx/mach-imx25.c @@ -10,12 +10,29 @@ */ #include <linux/irq.h> +#include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include "common.h" -#include "mx25.h" +#include "hardware.h" + +static void __init imx25_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX25); +} + +static void __init mx25_init_irq(void) +{ + struct device_node *np; + void __iomem *avic_base; + + np = of_find_compatible_node(NULL, NULL, "fsl,avic"); + avic_base = of_iomap(np, 0); + BUG_ON(!avic_base); + mxc_init_irq(avic_base); +} static const char * const imx25_dt_board_compat[] __initconst = { "fsl,imx25", @@ -23,7 +40,6 @@ static const char * const imx25_dt_board_compat[] __initconst = { }; DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") - .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, .dt_compat = imx25_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c deleted file mode 100644 index 0d01e367b062..000000000000 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ /dev/null @@ -1,270 +0,0 @@ -/* - * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -/* - * This machine is known as: - * - i.MX25 3-Stack Development System - * - i.MX25 Platform Development Kit (i.MX25 PDK) - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/usb/otg.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/memory.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx25.h" -#include "ehci.h" -#include "hardware.h" -#include "iomux-mx25.h" -#include "mx25.h" - -#define MX25PDK_CAN_PWDN IMX_GPIO_NR(4, 6) - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static iomux_v3_cfg_t mx25pdk_pads[] = { - MX25_PAD_FEC_MDC__FEC_MDC, - MX25_PAD_FEC_MDIO__FEC_MDIO, - MX25_PAD_FEC_TDATA0__FEC_TDATA0, - MX25_PAD_FEC_TDATA1__FEC_TDATA1, - MX25_PAD_FEC_TX_EN__FEC_TX_EN, - MX25_PAD_FEC_RDATA0__FEC_RDATA0, - MX25_PAD_FEC_RDATA1__FEC_RDATA1, - MX25_PAD_FEC_RX_DV__FEC_RX_DV, - MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, - MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */ - MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */ - - /* LCD */ - MX25_PAD_LD0__LD0, - MX25_PAD_LD1__LD1, - MX25_PAD_LD2__LD2, - MX25_PAD_LD3__LD3, - MX25_PAD_LD4__LD4, - MX25_PAD_LD5__LD5, - MX25_PAD_LD6__LD6, - MX25_PAD_LD7__LD7, - MX25_PAD_LD8__LD8, - MX25_PAD_LD9__LD9, - MX25_PAD_LD10__LD10, - MX25_PAD_LD11__LD11, - MX25_PAD_LD12__LD12, - MX25_PAD_LD13__LD13, - MX25_PAD_LD14__LD14, - MX25_PAD_LD15__LD15, - MX25_PAD_GPIO_E__LD16, - MX25_PAD_GPIO_F__LD17, - MX25_PAD_HSYNC__HSYNC, - MX25_PAD_VSYNC__VSYNC, - MX25_PAD_LSCLK__LSCLK, - MX25_PAD_OE_ACD__OE_ACD, - MX25_PAD_CONTRAST__CONTRAST, - - /* Keypad */ - MX25_PAD_KPP_ROW0__KPP_ROW0, - MX25_PAD_KPP_ROW1__KPP_ROW1, - MX25_PAD_KPP_ROW2__KPP_ROW2, - MX25_PAD_KPP_ROW3__KPP_ROW3, - MX25_PAD_KPP_COL0__KPP_COL0, - MX25_PAD_KPP_COL1__KPP_COL1, - MX25_PAD_KPP_COL2__KPP_COL2, - MX25_PAD_KPP_COL3__KPP_COL3, - - /* SD1 */ - MX25_PAD_SD1_CMD__SD1_CMD, - MX25_PAD_SD1_CLK__SD1_CLK, - MX25_PAD_SD1_DATA0__SD1_DATA0, - MX25_PAD_SD1_DATA1__SD1_DATA1, - MX25_PAD_SD1_DATA2__SD1_DATA2, - MX25_PAD_SD1_DATA3__SD1_DATA3, - MX25_PAD_A14__GPIO_2_0, /* WriteProtect */ - MX25_PAD_A15__GPIO_2_1, /* CardDetect */ - - /* I2C1 */ - MX25_PAD_I2C1_CLK__I2C1_CLK, - MX25_PAD_I2C1_DAT__I2C1_DAT, - - /* CAN1 */ - MX25_PAD_GPIO_A__CAN1_TX, - MX25_PAD_GPIO_B__CAN1_RX, - MX25_PAD_D14__GPIO_4_6, /* CAN_PWDN */ -}; - -static const struct fec_platform_data mx25_fec_pdata __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -#define FEC_ENABLE_GPIO IMX_GPIO_NR(2, 3) -#define FEC_RESET_B_GPIO IMX_GPIO_NR(4, 8) - -static void __init mx25pdk_fec_reset(void) -{ - gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable"); - gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset"); - - gpio_direction_output(FEC_ENABLE_GPIO, 0); /* drop PHY power */ - gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */ - udelay(2); - - /* turn on PHY power and lift reset */ - gpio_set_value(FEC_ENABLE_GPIO, 1); - gpio_set_value(FEC_RESET_B_GPIO, 1); -} - -static const struct mxc_nand_platform_data -mx25pdk_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -static struct imx_fb_videomode mx25pdk_modes[] = { - { - .mode = { - .name = "CRT-VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39683, - .left_margin = 45, - .right_margin = 114, - .upper_margin = 33, - .lower_margin = 11, - .hsync_len = 1, - .vsync_len = 1, - }, - .bpp = 16, - .pcr = 0xFA208B80, - }, -}; - -static const struct imx_fb_platform_data mx25pdk_fb_pdata __initconst = { - .mode = mx25pdk_modes, - .num_modes = ARRAY_SIZE(mx25pdk_modes), - .pwmr = 0x00A903FF, - .lscr1 = 0x00120300, - .dmacr = 0x00020010, -}; - -static const uint32_t mx25pdk_keymap[] = { - KEY(0, 0, KEY_UP), - KEY(0, 1, KEY_DOWN), - KEY(0, 2, KEY_VOLUMEDOWN), - KEY(0, 3, KEY_HOME), - KEY(1, 0, KEY_RIGHT), - KEY(1, 1, KEY_LEFT), - KEY(1, 2, KEY_ENTER), - KEY(1, 3, KEY_VOLUMEUP), - KEY(2, 0, KEY_F6), - KEY(2, 1, KEY_F8), - KEY(2, 2, KEY_F9), - KEY(2, 3, KEY_F10), - KEY(3, 0, KEY_F1), - KEY(3, 1, KEY_F2), - KEY(3, 2, KEY_F3), - KEY(3, 3, KEY_POWER), -}; - -static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = { - .keymap = mx25pdk_keymap, - .keymap_size = ARRAY_SIZE(mx25pdk_keymap), -}; - -static int mx25pdk_usbh2_init(struct platform_device *pdev) -{ - return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); -} - -static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { - .init = mx25pdk_usbh2_init, - .portsc = MXC_EHCI_MODE_SERIAL, -}; - -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI, -}; - -static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = { - .bitrate = 100000, -}; - -#define SD1_GPIO_WP IMX_GPIO_NR(2, 0) -#define SD1_GPIO_CD IMX_GPIO_NR(2, 1) - -static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = { - .wp_gpio = SD1_GPIO_WP, - .cd_gpio = SD1_GPIO_CD, - .wp_type = ESDHC_WP_GPIO, - .cd_type = ESDHC_CD_GPIO, -}; - -static void __init mx25pdk_init(void) -{ - imx25_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, - ARRAY_SIZE(mx25pdk_pads)); - - imx25_add_imx_uart0(&uart_pdata); - imx25_add_fsl_usb2_udc(&otg_device_pdata); - imx25_add_mxc_ehci_hs(&usbh2_pdata); - imx25_add_mxc_nand(&mx25pdk_nand_board_info); - imx25_add_imxdi_rtc(); - imx25_add_imx_fb(&mx25pdk_fb_pdata); - imx25_add_imx2_wdt(); - - mx25pdk_fec_reset(); - imx25_add_fec(&mx25_fec_pdata); - imx25_add_imx_keypad(&mx25pdk_keymap_data); - - imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata); - imx25_add_imx_i2c0(&mx25_3ds_i2c0_data); - - gpio_request_one(MX25PDK_CAN_PWDN, GPIOF_OUT_INIT_LOW, "can-pwdn"); - imx25_add_flexcan0(); -} - -static void __init mx25pdk_timer_init(void) -{ - mx25_clocks_init(); -} - -MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") - /* Maintainer: Freescale Semiconductor, Inc. */ - .atag_offset = 0x100, - .map_io = mx25_map_io, - .init_early = imx25_init_early, - .init_irq = mx25_init_irq, - .init_time = mx25pdk_timer_init, - .init_machine = mx25pdk_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 72cd77d21f63..7e315f00648d 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -166,7 +166,7 @@ static struct platform_device *devices[] __initdata = { &mx35pdk_flash, }; -static iomux_v3_cfg_t mx35pdk_pads[] = { +static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = { /* UART1 */ MX35_PAD_CTS1__UART1_CTS, MX35_PAD_RTS1__UART1_RTS, diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index b623bcaca76c..e447e59c0604 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -129,7 +129,7 @@ static struct platform_device *devices[] __initdata = { &pcm043_flash, }; -static iomux_v3_cfg_t pcm043_pads[] = { +static const iomux_v3_cfg_t pcm043_pads[] __initconst = { /* UART1 */ MX35_PAD_CTS1__UART1_CTS, MX35_PAD_RTS1__UART1_RTS, diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 97836e94451c..27a8f7e3ec08 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -161,7 +161,7 @@ static struct i2c_board_info vpr200_i2c_devices[] = { } }; -static iomux_v3_cfg_t vpr200_pads[] = { +static const iomux_v3_cfg_t vpr200_pads[] __initconst = { /* UART1 */ MX35_PAD_TXD1__UART1_TXD_MUX, MX35_PAD_RXD1__UART1_RXD_MUX, diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c deleted file mode 100644 index 5211f62c624e..000000000000 --- a/arch/arm/mach-imx/mm-imx25.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright (C) 1999,2000 Arm Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - add MX31 specific definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/pinctrl/machine.h> - -#include <asm/pgtable.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices/devices-common.h" -#include "hardware.h" -#include "iomux-v3.h" -#include "mx25.h" - -/* - * This table defines static virtual address mappings for I/O regions. - * These are the mappings common across all MX25 boards. - */ -static struct map_desc mx25_io_desc[] __initdata = { - imx_map_entry(MX25, AVIC, MT_DEVICE_NONSHARED), - imx_map_entry(MX25, AIPS1, MT_DEVICE_NONSHARED), - imx_map_entry(MX25, AIPS2, MT_DEVICE_NONSHARED), -}; - -/* - * This function initializes the memory map. It is called during the - * system startup to create static physical to virtual memory mappings - * for the IO modules. - */ -void __init mx25_map_io(void) -{ - iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc)); -} - -void __init imx25_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX25); - mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR)); -} - -void __init mx25_init_irq(void) -{ - mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR)); -} - -static struct sdma_platform_data imx25_sdma_pdata __initdata = { - .fw_name = "sdma-imx25.bin", -}; - -static const struct resource imx25_audmux_res[] __initconst = { - DEFINE_RES_MEM(MX25_AUDMUX_BASE_ADDR, SZ_16K), -}; - -void __init imx25_soc_init(void) -{ - mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR)); - mxc_device_init(); - - /* i.mx25 has the i.mx35 type gpio */ - mxc_register_gpio("imx35-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0); - mxc_register_gpio("imx35-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); - mxc_register_gpio("imx35-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); - mxc_register_gpio("imx35-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); - - pinctrl_provide_dummies(); - /* i.mx25 has the i.mx35 type sdma */ - imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata); - /* i.mx25 has the i.mx31 type audmux */ - platform_device_register_simple("imx31-audmux", 0, imx25_audmux_res, - ARRAY_SIZE(imx25_audmux_res)); -} diff --git a/arch/arm/mach-imx/mx25.h b/arch/arm/mach-imx/mx25.h deleted file mode 100644 index ec466400a200..000000000000 --- a/arch/arm/mach-imx/mx25.h +++ /dev/null @@ -1,117 +0,0 @@ -#ifndef __MACH_MX25_H__ -#define __MACH_MX25_H__ - -#define MX25_AIPS1_BASE_ADDR 0x43f00000 -#define MX25_AIPS1_SIZE SZ_1M -#define MX25_AIPS2_BASE_ADDR 0x53f00000 -#define MX25_AIPS2_SIZE SZ_1M -#define MX25_AVIC_BASE_ADDR 0x68000000 -#define MX25_AVIC_SIZE SZ_1M - -#define MX25_I2C1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x80000) -#define MX25_I2C3_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x84000) -#define MX25_CAN1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x88000) -#define MX25_CAN2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x8c000) -#define MX25_I2C2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x98000) -#define MX25_CSPI1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xa4000) -#define MX25_IOMUXC_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xac000) - -#define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000) -#define MX25_GPT1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x90000) -#define MX25_GPIO4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x9c000) -#define MX25_PWM2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa0000) -#define MX25_GPIO3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa4000) -#define MX25_PWM3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa8000) -#define MX25_PWM4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xc8000) -#define MX25_GPIO1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xcc000) -#define MX25_GPIO2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xd0000) -#define MX25_WDOG_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xdc000) -#define MX25_PWM1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xe0000) - -#define MX25_UART1_BASE_ADDR 0x43f90000 -#define MX25_UART2_BASE_ADDR 0x43f94000 -#define MX25_AUDMUX_BASE_ADDR 0x43fb0000 -#define MX25_UART3_BASE_ADDR 0x5000c000 -#define MX25_UART4_BASE_ADDR 0x50008000 -#define MX25_UART5_BASE_ADDR 0x5002c000 - -#define MX25_CSPI3_BASE_ADDR 0x50004000 -#define MX25_CSPI2_BASE_ADDR 0x50010000 -#define MX25_FEC_BASE_ADDR 0x50038000 -#define MX25_SSI2_BASE_ADDR 0x50014000 -#define MX25_SSI1_BASE_ADDR 0x50034000 -#define MX25_NFC_BASE_ADDR 0xbb000000 -#define MX25_IIM_BASE_ADDR 0x53ff0000 -#define MX25_DRYICE_BASE_ADDR 0x53ffc000 -#define MX25_ESDHC1_BASE_ADDR 0x53fb4000 -#define MX25_ESDHC2_BASE_ADDR 0x53fb8000 -#define MX25_LCDC_BASE_ADDR 0x53fbc000 -#define MX25_KPP_BASE_ADDR 0x43fa8000 -#define MX25_SDMA_BASE_ADDR 0x53fd4000 -#define MX25_USB_BASE_ADDR 0x53ff4000 -#define MX25_USB_OTG_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0000) -/* - * The reference manual (IMX25RM, Rev. 1, 06/2009) specifies an offset of 0x200 - * for the host controller. Early documentation drafts specified 0x400 and - * Freescale internal sources confirm only the latter value to work. - */ -#define MX25_USB_HS_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0400) -#define MX25_CSI_BASE_ADDR 0x53ff8000 - -#define MX25_IO_P2V(x) IMX_IO_P2V(x) -#define MX25_IO_ADDRESS(x) IOMEM(MX25_IO_P2V(x)) - -/* - * Interrupt numbers - */ -#include <asm/irq.h> -#define MX25_INT_CSPI3 (NR_IRQS_LEGACY + 0) -#define MX25_INT_I2C1 (NR_IRQS_LEGACY + 3) -#define MX25_INT_I2C2 (NR_IRQS_LEGACY + 4) -#define MX25_INT_UART4 (NR_IRQS_LEGACY + 5) -#define MX25_INT_ESDHC2 (NR_IRQS_LEGACY + 8) -#define MX25_INT_ESDHC1 (NR_IRQS_LEGACY + 9) -#define MX25_INT_I2C3 (NR_IRQS_LEGACY + 10) -#define MX25_INT_SSI2 (NR_IRQS_LEGACY + 11) -#define MX25_INT_SSI1 (NR_IRQS_LEGACY + 12) -#define MX25_INT_CSPI2 (NR_IRQS_LEGACY + 13) -#define MX25_INT_CSPI1 (NR_IRQS_LEGACY + 14) -#define MX25_INT_GPIO3 (NR_IRQS_LEGACY + 16) -#define MX25_INT_CSI (NR_IRQS_LEGACY + 17) -#define MX25_INT_UART3 (NR_IRQS_LEGACY + 18) -#define MX25_INT_GPIO4 (NR_IRQS_LEGACY + 23) -#define MX25_INT_KPP (NR_IRQS_LEGACY + 24) -#define MX25_INT_DRYICE (NR_IRQS_LEGACY + 25) -#define MX25_INT_PWM1 (NR_IRQS_LEGACY + 26) -#define MX25_INT_UART2 (NR_IRQS_LEGACY + 32) -#define MX25_INT_NFC (NR_IRQS_LEGACY + 33) -#define MX25_INT_SDMA (NR_IRQS_LEGACY + 34) -#define MX25_INT_USB_HS (NR_IRQS_LEGACY + 35) -#define MX25_INT_PWM2 (NR_IRQS_LEGACY + 36) -#define MX25_INT_USB_OTG (NR_IRQS_LEGACY + 37) -#define MX25_INT_LCDC (NR_IRQS_LEGACY + 39) -#define MX25_INT_UART5 (NR_IRQS_LEGACY + 40) -#define MX25_INT_PWM3 (NR_IRQS_LEGACY + 41) -#define MX25_INT_PWM4 (NR_IRQS_LEGACY + 42) -#define MX25_INT_CAN1 (NR_IRQS_LEGACY + 43) -#define MX25_INT_CAN2 (NR_IRQS_LEGACY + 44) -#define MX25_INT_UART1 (NR_IRQS_LEGACY + 45) -#define MX25_INT_GPIO2 (NR_IRQS_LEGACY + 51) -#define MX25_INT_GPIO1 (NR_IRQS_LEGACY + 52) -#define MX25_INT_GPT1 (NR_IRQS_LEGACY + 54) -#define MX25_INT_FEC (NR_IRQS_LEGACY + 57) - -#define MX25_DMA_REQ_SSI2_RX1 22 -#define MX25_DMA_REQ_SSI2_TX1 23 -#define MX25_DMA_REQ_SSI2_RX0 24 -#define MX25_DMA_REQ_SSI2_TX0 25 -#define MX25_DMA_REQ_SSI1_RX1 26 -#define MX25_DMA_REQ_SSI1_TX1 27 -#define MX25_DMA_REQ_SSI1_RX0 28 -#define MX25_DMA_REQ_SSI1_TX0 29 - -#ifndef __ASSEMBLY__ -extern int mx25_revision(void); -#endif - -#endif /* ifndef __MACH_MX25_H__ */ diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig deleted file mode 100644 index a6b50e62a495..000000000000 --- a/arch/arm/mach-msm/Kconfig +++ /dev/null @@ -1,109 +0,0 @@ -if ARCH_MSM - -choice - prompt "Qualcomm MSM SoC Type" - default ARCH_MSM7X00A - depends on ARCH_MSM - -config ARCH_MSM7X00A - bool "MSM7x00A / MSM7x01A" - select ARCH_MSM_ARM11 - select CPU_V6 - select GPIO_MSM_V1 - select MACH_TROUT if !MACH_HALIBUT - select MSM_PROC_COMM - select MSM_SMD - select CLKSRC_QCOM - select MSM_SMD_PKG3 - -config ARCH_MSM7X30 - bool "MSM7x30" - select ARCH_MSM_SCORPION - select CPU_V7 - select GPIO_MSM_V1 - select MACH_MSM7X30_SURF # if ! - select MSM_GPIOMUX - select MSM_PROC_COMM - select MSM_SMD - select CLKSRC_QCOM - select MSM_VIC - -config ARCH_QSD8X50 - bool "QSD8X50" - select ARCH_MSM_SCORPION - select CPU_V7 - select GPIO_MSM_V1 - select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5 - select MSM_GPIOMUX - select MSM_PROC_COMM - select MSM_SMD - select CLKSRC_QCOM - select MSM_VIC - -endchoice - -config MSM_SOC_REV_A - bool - -config ARCH_MSM_ARM11 - bool - -config ARCH_MSM_SCORPION - bool - -config MSM_VIC - bool - -menu "Qualcomm MSM Board Type" - depends on ARCH_MSM - -config MACH_HALIBUT - depends on ARCH_MSM - depends on ARCH_MSM7X00A - bool "Halibut Board (QCT SURF7201A)" - help - Support for the Qualcomm SURF7201A eval board. - -config MACH_TROUT - depends on ARCH_MSM - depends on ARCH_MSM7X00A - bool "HTC Dream (aka trout)" - help - Support for the HTC Dream, T-Mobile G1, Android ADP1 devices. - -config MACH_MSM7X30_SURF - depends on ARCH_MSM7X30 - bool "MSM7x30 SURF" - help - Support for the Qualcomm MSM7x30 SURF eval board. - -config MACH_QSD8X50_SURF - depends on ARCH_QSD8X50 - bool "QSD8x50 SURF" - help - Support for the Qualcomm QSD8x50 SURF eval board. - -config MACH_QSD8X50A_ST1_5 - depends on ARCH_QSD8X50 - bool "QSD8x50A ST1.5" - select MSM_SOC_REV_A - help - Support for the Qualcomm ST1.5. - -endmenu - -config MSM_SMD_PKG3 - bool - -config MSM_PROC_COMM - bool - -config MSM_SMD - bool - -config MSM_GPIOMUX - bool - help - Support for MSM V1 TLMM GPIOMUX architecture. - -endif diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile deleted file mode 100644 index 27c078a568df..000000000000 --- a/arch/arm/mach-msm/Makefile +++ /dev/null @@ -1,23 +0,0 @@ -obj-$(CONFIG_MSM_PROC_COMM) += clock.o - -obj-$(CONFIG_MSM_VIC) += irq-vic.o - -obj-$(CONFIG_ARCH_MSM7X00A) += irq.o -obj-$(CONFIG_ARCH_QSD8X50) += sirc.o - -obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o - -obj-$(CONFIG_ARCH_MSM7X00A) += dma.o io.o -obj-$(CONFIG_ARCH_MSM7X30) += dma.o io.o -obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o - -obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o -obj-$(CONFIG_MSM_SMD) += last_radio_log.o - -obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o -obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o -obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o -obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o -obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o -obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o -obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot deleted file mode 100644 index 9b803a578b4d..000000000000 --- a/arch/arm/mach-msm/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x10008000 -params_phys-y := 0x10000100 -initrd_phys-y := 0x10800000 diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c deleted file mode 100644 index fc832040c6e9..000000000000 --- a/arch/arm/mach-msm/board-halibut.c +++ /dev/null @@ -1,110 +0,0 @@ -/* linux/arch/arm/mach-msm/board-halibut.c - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/smc91x.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> -#include <asm/setup.h> - -#include <mach/irqs.h> -#include <mach/msm_iomap.h> - -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> - -#include "devices.h" -#include "common.h" - -static struct resource smc91x_resources[] = { - [0] = { - .start = 0x9C004300, - .end = 0x9C004400, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MSM_GPIO_TO_INT(49), - .end = MSM_GPIO_TO_INT(49), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct smc91x_platdata smc91x_platdata = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, - .dev.platform_data = &smc91x_platdata, -}; - -static struct platform_device *devices[] __initdata = { - &msm_clock_7x01a, - &msm_device_gpio_7201, - &msm_device_uart3, - &msm_device_smd, - &msm_device_nand, - &msm_device_hsusb, - &msm_device_i2c, - &smc91x_device, -}; - -static void __init halibut_init_early(void) -{ - arch_ioremap_caller = __msm_ioremap_caller; -} - -static void __init halibut_init_irq(void) -{ - msm_init_irq(); -} - -static void __init halibut_init(void) -{ - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init halibut_map_io(void) -{ - msm_map_common_io(); -} - -static void __init halibut_init_late(void) -{ - smd_debugfs_init(); -} - -MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)") - .atag_offset = 0x100, - .map_io = halibut_map_io, - .init_early = halibut_init_early, - .init_irq = halibut_init_irq, - .init_machine = halibut_init, - .init_late = halibut_init_late, - .init_time = msm7x01_timer_init, -MACHINE_END diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c deleted file mode 100644 index 8f5ecdc4f3ce..000000000000 --- a/arch/arm/mach-msm/board-msm7x30.c +++ /dev/null @@ -1,191 +0,0 @@ -/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/smsc911x.h> -#include <linux/usb/msm_hsusb.h> -#include <linux/clkdev.h> -#include <linux/memblock.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/memory.h> -#include <asm/setup.h> - -#include <mach/clk.h> -#include <mach/msm_iomap.h> -#include <mach/dma.h> - -#include <mach/vreg.h> -#include "devices.h" -#include "gpiomux.h" -#include "proc_comm.h" -#include "common.h" - -static void __init msm7x30_fixup(struct tag *tag, char **cmdline) -{ - for (; tag->hdr.size; tag = tag_next(tag)) - if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) { - tag->u.mem.start = 0; - tag->u.mem.size += SZ_2M; - } -} - -static void __init msm7x30_reserve(void) -{ - memblock_remove(0x0, SZ_2M); -} - -static int hsusb_phy_init_seq[] = { - 0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */ - 0x02, 0x36, /* Disable CDR Auto Reset feature */ - -1 -}; - -static int hsusb_link_clk_reset(struct clk *link_clk, bool assert) -{ - int ret; - - if (assert) { - ret = clk_reset(link_clk, CLK_RESET_ASSERT); - if (ret) - pr_err("usb hs_clk assert failed\n"); - } else { - ret = clk_reset(link_clk, CLK_RESET_DEASSERT); - if (ret) - pr_err("usb hs_clk deassert failed\n"); - } - return ret; -} - -static int hsusb_phy_clk_reset(struct clk *phy_clk) -{ - int ret; - - ret = clk_reset(phy_clk, CLK_RESET_ASSERT); - if (ret) { - pr_err("usb phy clk assert failed\n"); - return ret; - } - usleep_range(10000, 12000); - ret = clk_reset(phy_clk, CLK_RESET_DEASSERT); - if (ret) - pr_err("usb phy clk deassert failed\n"); - return ret; -} - -static struct msm_otg_platform_data msm_otg_pdata = { - .phy_init_seq = hsusb_phy_init_seq, - .mode = USB_DR_MODE_PERIPHERAL, - .otg_control = OTG_PHY_CONTROL, - .link_clk_reset = hsusb_link_clk_reset, - .phy_clk_reset = hsusb_phy_clk_reset, -}; - -struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { -#ifdef CONFIG_SERIAL_MSM_CONSOLE - [49] = { /* UART2 RFR */ - .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | - GPIOMUX_FUNC_2 | GPIOMUX_VALID, - }, - [50] = { /* UART2 CTS */ - .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | - GPIOMUX_FUNC_2 | GPIOMUX_VALID, - }, - [51] = { /* UART2 RX */ - .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | - GPIOMUX_FUNC_2 | GPIOMUX_VALID, - }, - [52] = { /* UART2 TX */ - .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | - GPIOMUX_FUNC_2 | GPIOMUX_VALID, - }, -#endif -}; - -static struct platform_device *devices[] __initdata = { - &msm_clock_7x30, - &msm_device_gpio_7x30, -#if defined(CONFIG_SERIAL_MSM) - &msm_device_uart2, -#endif - &msm_device_smd, - &msm_device_otg, - &msm_device_hsusb, - &msm_device_hsusb_host, -}; - -static void __init msm7x30_init_irq(void) -{ - msm_init_irq(); -} - -static void __init msm7x30_init(void) -{ - msm_device_otg.dev.platform_data = &msm_otg_pdata; - msm_device_hsusb.dev.parent = &msm_device_otg.dev; - msm_device_hsusb_host.dev.parent = &msm_device_otg.dev; - - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init msm7x30_map_io(void) -{ - msm_map_msm7x30_io(); -} - -static void __init msm7x30_init_late(void) -{ - smd_debugfs_init(); -} - -MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") - .atag_offset = 0x100, - .fixup = msm7x30_fixup, - .reserve = msm7x30_reserve, - .map_io = msm7x30_map_io, - .init_irq = msm7x30_init_irq, - .init_machine = msm7x30_init, - .init_late = msm7x30_init_late, - .init_time = msm7x30_timer_init, -MACHINE_END - -MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") - .atag_offset = 0x100, - .fixup = msm7x30_fixup, - .reserve = msm7x30_reserve, - .map_io = msm7x30_map_io, - .init_irq = msm7x30_init_irq, - .init_machine = msm7x30_init, - .init_late = msm7x30_init_late, - .init_time = msm7x30_timer_init, -MACHINE_END - -MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") - .atag_offset = 0x100, - .fixup = msm7x30_fixup, - .reserve = msm7x30_reserve, - .map_io = msm7x30_map_io, - .init_irq = msm7x30_init_irq, - .init_machine = msm7x30_init, - .init_late = msm7x30_init_late, - .init_time = msm7x30_timer_init, -MACHINE_END diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c deleted file mode 100644 index 10016a3bc698..000000000000 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ /dev/null @@ -1,254 +0,0 @@ -/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/usb/msm_hsusb.h> -#include <linux/err.h> -#include <linux/clkdev.h> -#include <linux/smc91x.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/io.h> -#include <asm/setup.h> - -#include <mach/irqs.h> -#include <mach/sirc.h> -#include <mach/vreg.h> -#include <mach/clk.h> -#include <linux/platform_data/mmc-msm_sdcc.h> - -#include "devices.h" -#include "common.h" - -static const resource_size_t qsd8x50_surf_smc91x_base __initconst = 0x70000300; -static const unsigned qsd8x50_surf_smc91x_gpio __initconst = 156; - -/* Leave smc91x resources empty here, as we'll fill them in - * at run-time: they vary from board to board, and the true - * configuration won't be known until boot. - */ -static struct resource smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct smc91x_platdata smc91x_platdata = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, - .dev.platform_data = &smc91x_platdata, -}; - -static int __init msm_init_smc91x(void) -{ - if (machine_is_qsd8x50_surf()) { - smc91x_resources[0].start = qsd8x50_surf_smc91x_base; - smc91x_resources[0].end = qsd8x50_surf_smc91x_base + 0xff; - smc91x_resources[1].start = - gpio_to_irq(qsd8x50_surf_smc91x_gpio); - smc91x_resources[1].end = - gpio_to_irq(qsd8x50_surf_smc91x_gpio); - platform_device_register(&smc91x_device); - } - - return 0; -} -module_init(msm_init_smc91x); - -static int hsusb_phy_init_seq[] = { - 0x08, 0x31, /* Increase HS Driver Amplitude */ - 0x20, 0x32, /* Enable and set Pre-Emphasis Depth to 10% */ - -1 -}; - -static int hsusb_link_clk_reset(struct clk *link_clk, bool assert) -{ - int ret; - - if (assert) { - ret = clk_reset(link_clk, CLK_RESET_ASSERT); - if (ret) - pr_err("usb hs_clk assert failed\n"); - } else { - ret = clk_reset(link_clk, CLK_RESET_DEASSERT); - if (ret) - pr_err("usb hs_clk deassert failed\n"); - } - return ret; -} - -static int hsusb_phy_clk_reset(struct clk *phy_clk) -{ - int ret; - - ret = clk_reset(phy_clk, CLK_RESET_ASSERT); - if (ret) { - pr_err("usb phy clk assert failed\n"); - return ret; - } - usleep_range(10000, 12000); - ret = clk_reset(phy_clk, CLK_RESET_DEASSERT); - if (ret) - pr_err("usb phy clk deassert failed\n"); - return ret; -} - -static struct msm_otg_platform_data msm_otg_pdata = { - .phy_init_seq = hsusb_phy_init_seq, - .mode = USB_DR_MODE_PERIPHERAL, - .otg_control = OTG_PHY_CONTROL, - .link_clk_reset = hsusb_link_clk_reset, - .phy_clk_reset = hsusb_phy_clk_reset, -}; - -static struct platform_device *devices[] __initdata = { - &msm_clock_8x50, - &msm_device_gpio_8x50, - &msm_device_uart3, - &msm_device_smd, - &msm_device_otg, - &msm_device_hsusb, - &msm_device_hsusb_host, -}; - -static struct msm_mmc_gpio sdc1_gpio_cfg[] = { - {51, "sdc1_dat_3"}, - {52, "sdc1_dat_2"}, - {53, "sdc1_dat_1"}, - {54, "sdc1_dat_0"}, - {55, "sdc1_cmd"}, - {56, "sdc1_clk"} -}; - -static struct vreg *vreg_mmc; -static unsigned long vreg_sts; - -static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd) -{ - int rc = 0; - struct platform_device *pdev; - - pdev = container_of(dv, struct platform_device, dev); - - if (vdd == 0) { - if (!vreg_sts) - return 0; - - clear_bit(pdev->id, &vreg_sts); - - if (!vreg_sts) { - rc = vreg_disable(vreg_mmc); - if (rc) - pr_err("vreg_mmc disable failed for slot " - "%d: %d\n", pdev->id, rc); - } - return 0; - } - - if (!vreg_sts) { - rc = vreg_set_level(vreg_mmc, 2900); - if (rc) - pr_err("vreg_mmc set level failed for slot %d: %d\n", - pdev->id, rc); - rc = vreg_enable(vreg_mmc); - if (rc) - pr_err("vreg_mmc enable failed for slot %d: %d\n", - pdev->id, rc); - } - set_bit(pdev->id, &vreg_sts); - return 0; -} - -static struct msm_mmc_gpio_data sdc1_gpio = { - .gpio = sdc1_gpio_cfg, - .size = ARRAY_SIZE(sdc1_gpio_cfg), -}; - -static struct msm_mmc_platform_data qsd8x50_sdc1_data = { - .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, - .translate_vdd = msm_sdcc_setup_power, - .gpio_data = &sdc1_gpio, -}; - -static void __init qsd8x50_init_mmc(void) -{ - vreg_mmc = vreg_get(NULL, "gp5"); - - if (IS_ERR(vreg_mmc)) { - pr_err("vreg get for vreg_mmc failed (%ld)\n", - PTR_ERR(vreg_mmc)); - return; - } - - msm_add_sdcc(1, &qsd8x50_sdc1_data, 0, 0); -} - -static void __init qsd8x50_map_io(void) -{ - msm_map_qsd8x50_io(); -} - -static void __init qsd8x50_init_irq(void) -{ - msm_init_irq(); - msm_init_sirc(); -} - -static void __init qsd8x50_init(void) -{ - msm_device_otg.dev.platform_data = &msm_otg_pdata; - msm_device_hsusb.dev.parent = &msm_device_otg.dev; - msm_device_hsusb_host.dev.parent = &msm_device_otg.dev; - platform_add_devices(devices, ARRAY_SIZE(devices)); - qsd8x50_init_mmc(); -} - -static void __init qsd8x50_init_late(void) -{ - smd_debugfs_init(); -} - -MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") - .atag_offset = 0x100, - .map_io = qsd8x50_map_io, - .init_irq = qsd8x50_init_irq, - .init_machine = qsd8x50_init, - .init_late = qsd8x50_init_late, - .init_time = qsd8x50_timer_init, -MACHINE_END - -MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") - .atag_offset = 0x100, - .map_io = qsd8x50_map_io, - .init_irq = qsd8x50_init_irq, - .init_machine = qsd8x50_init, - .init_late = qsd8x50_init_late, - .init_time = qsd8x50_timer_init, -MACHINE_END diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c deleted file mode 100644 index e50967926dcd..000000000000 --- a/arch/arm/mach-msm/board-sapphire.c +++ /dev/null @@ -1,114 +0,0 @@ -/* linux/arch/arm/mach-msm/board-sapphire.c - * Copyright (C) 2007-2009 HTC Corporation. - * Author: Thomas Tsai <thomas_tsai@htc.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. -*/ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/device.h> - -#include <linux/delay.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> -#include <mach/vreg.h> - -#include <asm/io.h> -#include <asm/delay.h> -#include <asm/setup.h> - -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <linux/memblock.h> - -#include "gpio_chip.h" -#include "board-sapphire.h" -#include "proc_comm.h" -#include "devices.h" -#include "common.h" - -void msm_init_irq(void); -void msm_init_gpio(void); - -static struct platform_device *devices[] __initdata = { - &msm_device_smd, - &msm_device_dmov, - &msm_device_nand, - &msm_device_uart1, - &msm_device_uart3, -}; - -void msm_timer_init(void); - -static void __init sapphire_init_irq(void) -{ - msm_init_irq(); -} - -static void __init sapphire_init(void) -{ - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static struct map_desc sapphire_io_desc[] __initdata = { - { - .virtual = SAPPHIRE_CPLD_BASE, - .pfn = __phys_to_pfn(SAPPHIRE_CPLD_START), - .length = SAPPHIRE_CPLD_SIZE, - .type = MT_DEVICE_NONSHARED - } -}; - -static void __init sapphire_fixup(struct tag *tags, char **cmdline) -{ - int smi_sz = parse_tag_smi((const struct tag *)tags); - - if (smi_sz == 32) { - memblock_add(PHYS_OFFSET, 84*SZ_1M); - } else if (smi_sz == 64) { - memblock_add(PHYS_OFFSET, 101*SZ_1M); - } else { - memblock_add(PHYS_OFFSET, 101*SZ_1M); - /* Give a default value when not get smi size */ - smi_sz = 64; - } -} - -static void __init sapphire_map_io(void) -{ - msm_map_common_io(); - iotable_init(sapphire_io_desc, ARRAY_SIZE(sapphire_io_desc)); - msm_clock_init(); -} - -static void __init sapphire_init_late(void) -{ - smd_debugfs_init(); -} - -MACHINE_START(SAPPHIRE, "sapphire") -/* Maintainer: Brian Swetland <swetland@google.com> */ - .atag_offset = 0x100, - .fixup = sapphire_fixup, - .map_io = sapphire_map_io, - .init_irq = sapphire_init_irq, - .init_machine = sapphire_init, - .init_late = sapphire_init_late, - .init_time = msm_timer_init, -MACHINE_END diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c deleted file mode 100644 index 722ad63b7edc..000000000000 --- a/arch/arm/mach-msm/board-trout-gpio.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - * linux/arch/arm/mach-msm/gpio.c - * - * Copyright (C) 2005 HP Labs - * Copyright (C) 2008 Google, Inc. - * Copyright (C) 2009 Pavel Machek <pavel@ucw.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/gpio.h> - -#include "board-trout.h" - -static uint8_t trout_int_mask[2] = { - [0] = 0xff, /* mask all interrupts */ - [1] = 0xff, -}; -static uint8_t trout_sleep_int_mask[] = { - [0] = 0xff, - [1] = 0xff, -}; - -struct msm_gpio_chip { - struct gpio_chip chip; - void __iomem *reg; /* Base of register bank */ - u8 shadow; -}; - -#define to_msm_gpio_chip(c) container_of(c, struct msm_gpio_chip, chip) - -static int msm_gpiolib_get(struct gpio_chip *chip, unsigned offset) -{ - struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip); - unsigned mask = 1 << offset; - - return !!(readb(msm_gpio->reg) & mask); -} - -static void msm_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val) -{ - struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip); - unsigned mask = 1 << offset; - - if (val) - msm_gpio->shadow |= mask; - else - msm_gpio->shadow &= ~mask; - - writeb(msm_gpio->shadow, msm_gpio->reg); -} - -static int msm_gpiolib_direction_input(struct gpio_chip *chip, - unsigned offset) -{ - msm_gpiolib_set(chip, offset, 0); - return 0; -} - -static int msm_gpiolib_direction_output(struct gpio_chip *chip, - unsigned offset, int val) -{ - msm_gpiolib_set(chip, offset, val); - return 0; -} - -static int trout_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - return TROUT_GPIO_TO_INT(offset + chip->base); -} - -#define TROUT_GPIO_BANK(name, reg_num, base_gpio, shadow_val) \ - { \ - .chip = { \ - .label = name, \ - .direction_input = msm_gpiolib_direction_input,\ - .direction_output = msm_gpiolib_direction_output, \ - .get = msm_gpiolib_get, \ - .set = msm_gpiolib_set, \ - .to_irq = trout_gpio_to_irq, \ - .base = base_gpio, \ - .ngpio = 8, \ - }, \ - .reg = reg_num + TROUT_CPLD_BASE, \ - .shadow = shadow_val, \ - } - -static struct msm_gpio_chip msm_gpio_banks[] = { -#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9a00000) - /* H2W pins <-> UART1 */ - TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x40), -#else - /* H2W pins <-> UART3, Bluetooth <-> UART1 */ - TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x80), -#endif - /* I2C pull */ - TROUT_GPIO_BANK("MISC3", 0x02, TROUT_GPIO_MISC3_BASE, 0x04), - TROUT_GPIO_BANK("MISC4", 0x04, TROUT_GPIO_MISC4_BASE, 0), - /* mmdi 32k en */ - TROUT_GPIO_BANK("MISC5", 0x06, TROUT_GPIO_MISC5_BASE, 0x04), - TROUT_GPIO_BANK("INT2", 0x08, TROUT_GPIO_INT2_BASE, 0), - TROUT_GPIO_BANK("MISC1", 0x0a, TROUT_GPIO_MISC1_BASE, 0), - TROUT_GPIO_BANK("VIRTUAL", 0x12, TROUT_GPIO_VIRTUAL_BASE, 0), -}; - -static void trout_gpio_irq_ack(struct irq_data *d) -{ - int bank = TROUT_INT_TO_BANK(d->irq); - uint8_t mask = TROUT_INT_TO_MASK(d->irq); - int reg = TROUT_BANK_TO_STAT_REG(bank); - /*printk(KERN_INFO "trout_gpio_irq_ack irq %d\n", d->irq);*/ - writeb(mask, TROUT_CPLD_BASE + reg); -} - -static void trout_gpio_irq_mask(struct irq_data *d) -{ - unsigned long flags; - uint8_t reg_val; - int bank = TROUT_INT_TO_BANK(d->irq); - uint8_t mask = TROUT_INT_TO_MASK(d->irq); - int reg = TROUT_BANK_TO_MASK_REG(bank); - - local_irq_save(flags); - reg_val = trout_int_mask[bank] |= mask; - /*printk(KERN_INFO "trout_gpio_irq_mask irq %d => %d:%02x\n", - d->irq, bank, reg_val);*/ - writeb(reg_val, TROUT_CPLD_BASE + reg); - local_irq_restore(flags); -} - -static void trout_gpio_irq_unmask(struct irq_data *d) -{ - unsigned long flags; - uint8_t reg_val; - int bank = TROUT_INT_TO_BANK(d->irq); - uint8_t mask = TROUT_INT_TO_MASK(d->irq); - int reg = TROUT_BANK_TO_MASK_REG(bank); - - local_irq_save(flags); - reg_val = trout_int_mask[bank] &= ~mask; - /*printk(KERN_INFO "trout_gpio_irq_unmask irq %d => %d:%02x\n", - d->irq, bank, reg_val);*/ - writeb(reg_val, TROUT_CPLD_BASE + reg); - local_irq_restore(flags); -} - -int trout_gpio_irq_set_wake(struct irq_data *d, unsigned int on) -{ - unsigned long flags; - int bank = TROUT_INT_TO_BANK(d->irq); - uint8_t mask = TROUT_INT_TO_MASK(d->irq); - - local_irq_save(flags); - if(on) - trout_sleep_int_mask[bank] &= ~mask; - else - trout_sleep_int_mask[bank] |= mask; - local_irq_restore(flags); - return 0; -} - -static void trout_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - int j, m; - unsigned v; - int bank; - int stat_reg; - int int_base = TROUT_INT_START; - uint8_t int_mask; - - for (bank = 0; bank < 2; bank++) { - stat_reg = TROUT_BANK_TO_STAT_REG(bank); - v = readb(TROUT_CPLD_BASE + stat_reg); - int_mask = trout_int_mask[bank]; - if (v & int_mask) { - writeb(v & int_mask, TROUT_CPLD_BASE + stat_reg); - printk(KERN_ERR "trout_gpio_irq_handler: got masked " - "interrupt: %d:%02x\n", bank, v & int_mask); - } - v &= ~int_mask; - while (v) { - m = v & -v; - j = fls(m) - 1; - /*printk(KERN_INFO "msm_gpio_irq_handler %d:%02x %02x b" - "it %d irq %d\n", bank, v, m, j, int_base + j);*/ - v &= ~m; - generic_handle_irq(int_base + j); - } - int_base += TROUT_INT_BANK0_COUNT; - } - desc->irq_data.chip->irq_ack(&desc->irq_data); -} - -static struct irq_chip trout_gpio_irq_chip = { - .name = "troutgpio", - .irq_ack = trout_gpio_irq_ack, - .irq_mask = trout_gpio_irq_mask, - .irq_unmask = trout_gpio_irq_unmask, - .irq_set_wake = trout_gpio_irq_set_wake, -}; - -/* - * Called from the processor-specific init to enable GPIO pin support. - */ -int __init trout_init_gpio(void) -{ - int i; - for(i = TROUT_INT_START; i <= TROUT_INT_END; i++) { - irq_set_chip_and_handler(i, &trout_gpio_irq_chip, - handle_edge_irq); - set_irq_flags(i, IRQF_VALID); - } - - for (i = 0; i < ARRAY_SIZE(msm_gpio_banks); i++) - gpiochip_add(&msm_gpio_banks[i].chip); - - irq_set_irq_type(MSM_GPIO_TO_INT(17), IRQF_TRIGGER_HIGH); - irq_set_chained_handler(MSM_GPIO_TO_INT(17), trout_gpio_irq_handler); - irq_set_irq_wake(MSM_GPIO_TO_INT(17), 1); - - return 0; -} - -postcore_initcall(trout_init_gpio); - diff --git a/arch/arm/mach-msm/board-trout-mmc.c b/arch/arm/mach-msm/board-trout-mmc.c deleted file mode 100644 index 3723e55819d6..000000000000 --- a/arch/arm/mach-msm/board-trout-mmc.c +++ /dev/null @@ -1,185 +0,0 @@ -/* linux/arch/arm/mach-msm/board-trout-mmc.c -** Author: Brian Swetland <swetland@google.com> -*/ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mmc/host.h> -#include <linux/mmc/sdio_ids.h> -#include <linux/err.h> -#include <linux/debugfs.h> - -#include <asm/io.h> - -#include <mach/vreg.h> - -#include <linux/platform_data/mmc-msm_sdcc.h> - -#include "devices.h" - -#include "board-trout.h" - -#include "proc_comm.h" - -#define DEBUG_SDSLOT_VDD 1 - -/* ---- COMMON ---- */ -static void config_gpio_table(uint32_t *table, int len) -{ - int n; - unsigned id; - for(n = 0; n < len; n++) { - id = table[n]; - msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &id, 0); - } -} - -/* ---- SDCARD ---- */ - -static uint32_t sdcard_on_gpio_table[] = { - PCOM_GPIO_CFG(62, 2, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_8MA), /* CLK */ - PCOM_GPIO_CFG(63, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* CMD */ - PCOM_GPIO_CFG(64, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT3 */ - PCOM_GPIO_CFG(65, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT2 */ - PCOM_GPIO_CFG(66, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT1 */ - PCOM_GPIO_CFG(67, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT0 */ -}; - -static uint32_t sdcard_off_gpio_table[] = { - PCOM_GPIO_CFG(62, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CLK */ - PCOM_GPIO_CFG(63, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CMD */ - PCOM_GPIO_CFG(64, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT3 */ - PCOM_GPIO_CFG(65, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT2 */ - PCOM_GPIO_CFG(66, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT1 */ - PCOM_GPIO_CFG(67, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT0 */ -}; - -static uint opt_disable_sdcard; - -static int __init trout_disablesdcard_setup(char *str) -{ - int cal = simple_strtol(str, NULL, 0); - - opt_disable_sdcard = cal; - return 1; -} - -__setup("board_trout.disable_sdcard=", trout_disablesdcard_setup); - -static struct vreg *vreg_sdslot; /* SD slot power */ - -struct mmc_vdd_xlat { - int mask; - int level; -}; - -static struct mmc_vdd_xlat mmc_vdd_table[] = { - { MMC_VDD_165_195, 1800 }, - { MMC_VDD_20_21, 2050 }, - { MMC_VDD_21_22, 2150 }, - { MMC_VDD_22_23, 2250 }, - { MMC_VDD_23_24, 2350 }, - { MMC_VDD_24_25, 2450 }, - { MMC_VDD_25_26, 2550 }, - { MMC_VDD_26_27, 2650 }, - { MMC_VDD_27_28, 2750 }, - { MMC_VDD_28_29, 2850 }, - { MMC_VDD_29_30, 2950 }, -}; - -static unsigned int sdslot_vdd = 0xffffffff; -static unsigned int sdslot_vreg_enabled; - -static uint32_t trout_sdslot_switchvdd(struct device *dev, unsigned int vdd) -{ - int i, rc; - - BUG_ON(!vreg_sdslot); - - if (vdd == sdslot_vdd) - return 0; - - sdslot_vdd = vdd; - - if (vdd == 0) { -#if DEBUG_SDSLOT_VDD - printk("%s: Disabling SD slot power\n", __func__); -#endif - config_gpio_table(sdcard_off_gpio_table, - ARRAY_SIZE(sdcard_off_gpio_table)); - vreg_disable(vreg_sdslot); - sdslot_vreg_enabled = 0; - return 0; - } - - if (!sdslot_vreg_enabled) { - rc = vreg_enable(vreg_sdslot); - if (rc) { - printk(KERN_ERR "%s: Error enabling vreg (%d)\n", - __func__, rc); - } - config_gpio_table(sdcard_on_gpio_table, - ARRAY_SIZE(sdcard_on_gpio_table)); - sdslot_vreg_enabled = 1; - } - - for (i = 0; i < ARRAY_SIZE(mmc_vdd_table); i++) { - if (mmc_vdd_table[i].mask == (1 << vdd)) { -#if DEBUG_SDSLOT_VDD - printk("%s: Setting level to %u\n", - __func__, mmc_vdd_table[i].level); -#endif - rc = vreg_set_level(vreg_sdslot, - mmc_vdd_table[i].level); - if (rc) { - printk(KERN_ERR - "%s: Error setting vreg level (%d)\n", - __func__, rc); - } - return 0; - } - } - - printk(KERN_ERR "%s: Invalid VDD %d specified\n", __func__, vdd); - return 0; -} - -static unsigned int trout_sdslot_status(struct device *dev) -{ - unsigned int status; - - status = (unsigned int) gpio_get_value(TROUT_GPIO_SDMC_CD_N); - return (!status); -} - -#define TROUT_MMC_VDD MMC_VDD_165_195 | MMC_VDD_20_21 | MMC_VDD_21_22 \ - | MMC_VDD_22_23 | MMC_VDD_23_24 | MMC_VDD_24_25 \ - | MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 \ - | MMC_VDD_28_29 | MMC_VDD_29_30 - -static struct msm_mmc_platform_data trout_sdslot_data = { - .ocr_mask = TROUT_MMC_VDD, - .status = trout_sdslot_status, - .translate_vdd = trout_sdslot_switchvdd, -}; - -int __init trout_init_mmc(unsigned int sys_rev) -{ - sdslot_vreg_enabled = 0; - - vreg_sdslot = vreg_get(0, "gp6"); - if (IS_ERR(vreg_sdslot)) - return PTR_ERR(vreg_sdslot); - - irq_set_irq_wake(TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 1); - - if (!opt_disable_sdcard) - msm_add_sdcc(2, &trout_sdslot_data, - TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 0); - else - printk(KERN_INFO "trout: SD-Card interface disabled\n"); - return 0; -} - diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c deleted file mode 100644 index 77b0a26f897f..000000000000 --- a/arch/arm/mach-msm/board-trout-panel.c +++ /dev/null @@ -1,292 +0,0 @@ -/* linux/arch/arm/mach-msm/board-trout-mddi.c -** Author: Brian Swetland <swetland@google.com> -*/ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/leds.h> -#include <linux/err.h> - -#include <asm/io.h> -#include <asm/mach-types.h> -#include <asm/system_info.h> - -#include <linux/platform_data/video-msm_fb.h> -#include <mach/vreg.h> - -#include "board-trout.h" -#include "proc_comm.h" -#include "clock-pcom.h" -#include "devices.h" - -#define TROUT_DEFAULT_BACKLIGHT_BRIGHTNESS 255 - -#define MDDI_CLIENT_CORE_BASE 0x108000 -#define LCD_CONTROL_BLOCK_BASE 0x110000 -#define SPI_BLOCK_BASE 0x120000 -#define I2C_BLOCK_BASE 0x130000 -#define PWM_BLOCK_BASE 0x140000 -#define GPIO_BLOCK_BASE 0x150000 -#define SYSTEM_BLOCK1_BASE 0x160000 -#define SYSTEM_BLOCK2_BASE 0x170000 - - -#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24) -#define SYSCLKENA (MDDI_CLIENT_CORE_BASE|0x2C) -#define PWM0OFF (PWM_BLOCK_BASE|0x1C) - -#define V_VDDE2E_VDD2_GPIO 0 -#define MDDI_RST_N 82 - -#define MDDICAP0 (MDDI_CLIENT_CORE_BASE|0x00) -#define MDDICAP1 (MDDI_CLIENT_CORE_BASE|0x04) -#define MDDICAP2 (MDDI_CLIENT_CORE_BASE|0x08) -#define MDDICAP3 (MDDI_CLIENT_CORE_BASE|0x0C) -#define MDCAPCHG (MDDI_CLIENT_CORE_BASE|0x10) -#define MDCRCERC (MDDI_CLIENT_CORE_BASE|0x14) -#define TTBUSSEL (MDDI_CLIENT_CORE_BASE|0x18) -#define DPSET0 (MDDI_CLIENT_CORE_BASE|0x1C) -#define DPSET1 (MDDI_CLIENT_CORE_BASE|0x20) -#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24) -#define DPRUN (MDDI_CLIENT_CORE_BASE|0x28) -#define SYSCKENA (MDDI_CLIENT_CORE_BASE|0x2C) -#define TESTMODE (MDDI_CLIENT_CORE_BASE|0x30) -#define FIFOMONI (MDDI_CLIENT_CORE_BASE|0x34) -#define INTMONI (MDDI_CLIENT_CORE_BASE|0x38) -#define MDIOBIST (MDDI_CLIENT_CORE_BASE|0x3C) -#define MDIOPSET (MDDI_CLIENT_CORE_BASE|0x40) -#define BITMAP0 (MDDI_CLIENT_CORE_BASE|0x44) -#define BITMAP1 (MDDI_CLIENT_CORE_BASE|0x48) -#define BITMAP2 (MDDI_CLIENT_CORE_BASE|0x4C) -#define BITMAP3 (MDDI_CLIENT_CORE_BASE|0x50) -#define BITMAP4 (MDDI_CLIENT_CORE_BASE|0x54) - -#define SRST (LCD_CONTROL_BLOCK_BASE|0x00) -#define PORT_ENB (LCD_CONTROL_BLOCK_BASE|0x04) -#define START (LCD_CONTROL_BLOCK_BASE|0x08) -#define PORT (LCD_CONTROL_BLOCK_BASE|0x0C) -#define CMN (LCD_CONTROL_BLOCK_BASE|0x10) -#define GAMMA (LCD_CONTROL_BLOCK_BASE|0x14) -#define INTFLG (LCD_CONTROL_BLOCK_BASE|0x18) -#define INTMSK (LCD_CONTROL_BLOCK_BASE|0x1C) -#define MPLFBUF (LCD_CONTROL_BLOCK_BASE|0x20) -#define HDE_LEFT (LCD_CONTROL_BLOCK_BASE|0x24) -#define VDE_TOP (LCD_CONTROL_BLOCK_BASE|0x28) -#define PXL (LCD_CONTROL_BLOCK_BASE|0x30) -#define HCYCLE (LCD_CONTROL_BLOCK_BASE|0x34) -#define HSW (LCD_CONTROL_BLOCK_BASE|0x38) -#define HDE_START (LCD_CONTROL_BLOCK_BASE|0x3C) -#define HDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x40) -#define VCYCLE (LCD_CONTROL_BLOCK_BASE|0x44) -#define VSW (LCD_CONTROL_BLOCK_BASE|0x48) -#define VDE_START (LCD_CONTROL_BLOCK_BASE|0x4C) -#define VDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x50) -#define WAKEUP (LCD_CONTROL_BLOCK_BASE|0x54) -#define WSYN_DLY (LCD_CONTROL_BLOCK_BASE|0x58) -#define REGENB (LCD_CONTROL_BLOCK_BASE|0x5C) -#define VSYNIF (LCD_CONTROL_BLOCK_BASE|0x60) -#define WRSTB (LCD_CONTROL_BLOCK_BASE|0x64) -#define RDSTB (LCD_CONTROL_BLOCK_BASE|0x68) -#define ASY_DATA (LCD_CONTROL_BLOCK_BASE|0x6C) -#define ASY_DATB (LCD_CONTROL_BLOCK_BASE|0x70) -#define ASY_DATC (LCD_CONTROL_BLOCK_BASE|0x74) -#define ASY_DATD (LCD_CONTROL_BLOCK_BASE|0x78) -#define ASY_DATE (LCD_CONTROL_BLOCK_BASE|0x7C) -#define ASY_DATF (LCD_CONTROL_BLOCK_BASE|0x80) -#define ASY_DATG (LCD_CONTROL_BLOCK_BASE|0x84) -#define ASY_DATH (LCD_CONTROL_BLOCK_BASE|0x88) -#define ASY_CMDSET (LCD_CONTROL_BLOCK_BASE|0x8C) - -#define SSICTL (SPI_BLOCK_BASE|0x00) -#define SSITIME (SPI_BLOCK_BASE|0x04) -#define SSITX (SPI_BLOCK_BASE|0x08) -#define SSIRX (SPI_BLOCK_BASE|0x0C) -#define SSIINTC (SPI_BLOCK_BASE|0x10) -#define SSIINTS (SPI_BLOCK_BASE|0x14) -#define SSIDBG1 (SPI_BLOCK_BASE|0x18) -#define SSIDBG2 (SPI_BLOCK_BASE|0x1C) -#define SSIID (SPI_BLOCK_BASE|0x20) - -#define WKREQ (SYSTEM_BLOCK1_BASE|0x00) -#define CLKENB (SYSTEM_BLOCK1_BASE|0x04) -#define DRAMPWR (SYSTEM_BLOCK1_BASE|0x08) -#define INTMASK (SYSTEM_BLOCK1_BASE|0x0C) -#define GPIOSEL (SYSTEM_BLOCK2_BASE|0x00) - -#define GPIODATA (GPIO_BLOCK_BASE|0x00) -#define GPIODIR (GPIO_BLOCK_BASE|0x04) -#define GPIOIS (GPIO_BLOCK_BASE|0x08) -#define GPIOIBE (GPIO_BLOCK_BASE|0x0C) -#define GPIOIEV (GPIO_BLOCK_BASE|0x10) -#define GPIOIE (GPIO_BLOCK_BASE|0x14) -#define GPIORIS (GPIO_BLOCK_BASE|0x18) -#define GPIOMIS (GPIO_BLOCK_BASE|0x1C) -#define GPIOIC (GPIO_BLOCK_BASE|0x20) -#define GPIOOMS (GPIO_BLOCK_BASE|0x24) -#define GPIOPC (GPIO_BLOCK_BASE|0x28) -#define GPIOID (GPIO_BLOCK_BASE|0x30) - -#define SPI_WRITE(reg, val) \ - { SSITX, 0x00010000 | (((reg) & 0xff) << 8) | ((val) & 0xff) }, \ - { 0, 5 }, - -#define SPI_WRITE1(reg) \ - { SSITX, (reg) & 0xff }, \ - { 0, 5 }, - -struct mddi_table { - uint32_t reg; - uint32_t value; -}; -static struct mddi_table mddi_toshiba_init_table[] = { - { DPSET0, 0x09e90046 }, - { DPSET1, 0x00000118 }, - { DPSUS, 0x00000000 }, - { DPRUN, 0x00000001 }, - { 1, 14 }, /* msleep 14 */ - { SYSCKENA, 0x00000001 }, - { CLKENB, 0x0000A1EF }, /* # SYS.CLKENB # Enable clocks for each module (without DCLK , i2cCLK) */ - - { GPIODATA, 0x02000200 }, /* # GPI .GPIODATA # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0 */ - { GPIODIR, 0x000030D }, /* 24D # GPI .GPIODIR # Select direction of GPIO port (0,2,3,6,9 output) */ - { GPIOSEL, 0/*0x00000173*/}, /* # SYS.GPIOSEL # GPIO port multiplexing control */ - { GPIOPC, 0x03C300C0 }, /* # GPI .GPIOPC # GPIO2,3 PD cut */ - { WKREQ, 0x00000000 }, /* # SYS.WKREQ # Wake-up request event is VSYNC alignment */ - - { GPIOIBE, 0x000003FF }, - { GPIOIS, 0x00000000 }, - { GPIOIC, 0x000003FF }, - { GPIOIE, 0x00000000 }, - - { GPIODATA, 0x00040004 }, /* # GPI .GPIODATA # eDRAM VD supply */ - { 1, 1 }, /* msleep 1 */ - { GPIODATA, 0x02040004 }, /* # GPI .GPIODATA # eDRAM VD supply */ - { DRAMPWR, 0x00000001 }, /* eDRAM power */ -}; - -#define GPIOSEL_VWAKEINT (1U << 0) -#define INTMASK_VWAKEOUT (1U << 0) - - -static int trout_new_backlight = 1; -static struct vreg *vreg_mddi_1v5; -static struct vreg *vreg_lcm_2v85; - -static void trout_process_mddi_table(struct msm_mddi_client_data *client_data, - struct mddi_table *table, size_t count) -{ - int i; - for (i = 0; i < count; i++) { - uint32_t reg = table[i].reg; - uint32_t value = table[i].value; - - if (reg == 0) - udelay(value); - else if (reg == 1) - msleep(value); - else - client_data->remote_write(client_data, value, reg); - } -} - -static int trout_mddi_toshiba_client_init( - struct msm_mddi_bridge_platform_data *bridge_data, - struct msm_mddi_client_data *client_data) -{ - int panel_id; - - client_data->auto_hibernate(client_data, 0); - trout_process_mddi_table(client_data, mddi_toshiba_init_table, - ARRAY_SIZE(mddi_toshiba_init_table)); - client_data->auto_hibernate(client_data, 1); - panel_id = (client_data->remote_read(client_data, GPIODATA) >> 4) & 3; - if (panel_id > 1) { - printk(KERN_WARNING "unknown panel id at mddi_enable\n"); - return -1; - } - return 0; -} - -static int trout_mddi_toshiba_client_uninit( - struct msm_mddi_bridge_platform_data *bridge_data, - struct msm_mddi_client_data *client_data) -{ - return 0; -} - -static struct resource resources_msm_fb[] = { - { - .start = MSM_FB_BASE, - .end = MSM_FB_BASE + MSM_FB_SIZE, - .flags = IORESOURCE_MEM, - }, -}; - -struct msm_mddi_bridge_platform_data toshiba_client_data = { - .init = trout_mddi_toshiba_client_init, - .uninit = trout_mddi_toshiba_client_uninit, - .fb_data = { - .xres = 320, - .yres = 480, - .width = 45, - .height = 67, - .output_format = 0, - }, -}; - -static struct msm_mddi_platform_data mddi_pdata = { - .clk_rate = 122880000, - .fb_resource = resources_msm_fb, - .num_clients = 1, - .client_platform_data = { - { - .product_id = (0xd263 << 16 | 0), - .name = "mddi_c_d263_0000", - .id = 0, - .client_data = &toshiba_client_data, - .clk_rate = 0, - }, - }, -}; - -int __init trout_init_panel(void) -{ - int rc; - - if (!machine_is_trout()) - return 0; - vreg_mddi_1v5 = vreg_get(0, "gp2"); - if (IS_ERR(vreg_mddi_1v5)) - return PTR_ERR(vreg_mddi_1v5); - vreg_lcm_2v85 = vreg_get(0, "gp4"); - if (IS_ERR(vreg_lcm_2v85)) - return PTR_ERR(vreg_lcm_2v85); - - trout_new_backlight = system_rev >= 5; - if (trout_new_backlight) { - uint32_t config = PCOM_GPIO_CFG(27, 0, GPIO_OUTPUT, - GPIO_NO_PULL, GPIO_8MA); - msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0); - } else { - uint32_t config = PCOM_GPIO_CFG(27, 1, GPIO_OUTPUT, - GPIO_NO_PULL, GPIO_8MA); - uint32_t id = P_GP_CLK; - uint32_t rate = 19200000; - - msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0); - - msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate); - if (id < 0) - pr_err("trout_init_panel: set clock rate failed\n"); - } - - rc = platform_device_register(&msm_device_mdp); - if (rc) - return rc; - msm_device_mddi0.dev.platform_data = &mddi_pdata; - return platform_device_register(&msm_device_mddi0); -} - -device_initcall(trout_init_panel); diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c deleted file mode 100644 index ba3edd3a46cb..000000000000 --- a/arch/arm/mach-msm/board-trout.c +++ /dev/null @@ -1,111 +0,0 @@ -/* linux/arch/arm/mach-msm/board-trout.c - * - * Copyright (C) 2009 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#define pr_fmt(fmt) "%s: " fmt, __func__ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/clkdev.h> -#include <linux/memblock.h> - -#include <asm/system_info.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/setup.h> - -#include <mach/hardware.h> -#include <mach/msm_iomap.h> - -#include "devices.h" -#include "board-trout.h" -#include "common.h" - -extern int trout_init_mmc(unsigned int); - -static struct platform_device *devices[] __initdata = { - &msm_clock_7x01a, - &msm_device_gpio_7201, - &msm_device_uart3, - &msm_device_smd, - &msm_device_nand, - &msm_device_hsusb, - &msm_device_i2c, -}; - -static void __init trout_init_early(void) -{ - arch_ioremap_caller = __msm_ioremap_caller; -} - -static void __init trout_init_irq(void) -{ - msm_init_irq(); -} - -static void __init trout_fixup(struct tag *tags, char **cmdline) -{ - memblock_add(PHYS_OFFSET, 101*SZ_1M); -} - -static void __init trout_init(void) -{ - int rc; - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - if (IS_ENABLED(CONFIG_MMC)) { - rc = trout_init_mmc(system_rev); - if (rc) - pr_crit("MMC init failure (%d)\n", rc); - } -} - -static struct map_desc trout_io_desc[] __initdata = { - { - .virtual = (unsigned long)TROUT_CPLD_BASE, - .pfn = __phys_to_pfn(TROUT_CPLD_START), - .length = TROUT_CPLD_SIZE, - .type = MT_DEVICE_NONSHARED - } -}; - -static void __init trout_map_io(void) -{ - msm_map_common_io(); - iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc)); - -#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9c00000) - /* route UART3 to the "H2W" extended usb connector */ - writeb(0x80, TROUT_CPLD_BASE + 0x00); -#endif -} - -static void __init trout_init_late(void) -{ - smd_debugfs_init(); -} - -MACHINE_START(TROUT, "HTC Dream") - .atag_offset = 0x100, - .fixup = trout_fixup, - .map_io = trout_map_io, - .init_early = trout_init_early, - .init_irq = trout_init_irq, - .init_machine = trout_init, - .init_late = trout_init_late, - .init_time = msm7x01_timer_init, -MACHINE_END diff --git a/arch/arm/mach-msm/board-trout.h b/arch/arm/mach-msm/board-trout.h deleted file mode 100644 index adb757abbb92..000000000000 --- a/arch/arm/mach-msm/board-trout.h +++ /dev/null @@ -1,162 +0,0 @@ -/* linux/arch/arm/mach-msm/board-trout.h -** Author: Brian Swetland <swetland@google.com> -*/ -#ifndef __ARCH_ARM_MACH_MSM_BOARD_TROUT_H -#define __ARCH_ARM_MACH_MSM_BOARD_TROUT_H - -#include "common.h" - -#define MSM_SMI_BASE 0x00000000 -#define MSM_SMI_SIZE 0x00800000 - -#define MSM_EBI_BASE 0x10000000 -#define MSM_EBI_SIZE 0x06e00000 - -#define MSM_PMEM_GPU0_BASE 0x00000000 -#define MSM_PMEM_GPU0_SIZE 0x00700000 - -#define MSM_PMEM_MDP_BASE 0x02000000 -#define MSM_PMEM_MDP_SIZE 0x00800000 - -#define MSM_PMEM_ADSP_BASE 0x02800000 -#define MSM_PMEM_ADSP_SIZE 0x00800000 - -#define MSM_PMEM_CAMERA_BASE 0x03000000 -#define MSM_PMEM_CAMERA_SIZE 0x00800000 - -#define MSM_FB_BASE 0x03800000 -#define MSM_FB_SIZE 0x00100000 - -#define MSM_LINUX_BASE MSM_EBI_BASE -#define MSM_LINUX_SIZE 0x06500000 - -#define MSM_PMEM_GPU1_SIZE 0x800000 -#define MSM_PMEM_GPU1_BASE (MSM_RAM_CONSOLE_BASE - MSM_PMEM_GPU1_SIZE) - -#define MSM_RAM_CONSOLE_BASE (MSM_EBI_BASE + 0x6d00000) -#define MSM_RAM_CONSOLE_SIZE (128 * SZ_1K) - -#if (MSM_FB_BASE + MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE) -#error invalid memory map -#endif - -#define DECLARE_MSM_IOMAP -#include <mach/msm_iomap.h> - -#define TROUT_4_BALL_UP_0 1 -#define TROUT_4_BALL_LEFT_0 18 -#define TROUT_4_BALL_DOWN_0 57 -#define TROUT_4_BALL_RIGHT_0 91 - -#define TROUT_5_BALL_UP_0 94 -#define TROUT_5_BALL_LEFT_0 18 -#define TROUT_5_BALL_DOWN_0 90 -#define TROUT_5_BALL_RIGHT_0 19 - -#define TROUT_POWER_KEY 20 - -#define TROUT_4_TP_LS_EN 19 -#define TROUT_5_TP_LS_EN 1 - -#define TROUT_CPLD_BASE IOMEM(0xE8100000) -#define TROUT_CPLD_START 0x98000000 -#define TROUT_CPLD_SIZE SZ_4K - -#define TROUT_GPIO_CABLE_IN1 (83) -#define TROUT_GPIO_CABLE_IN2 (49) - -#define TROUT_GPIO_START (128) - -#define TROUT_GPIO_INT_MASK0_REG (0x0c) -#define TROUT_GPIO_INT_STAT0_REG (0x0e) -#define TROUT_GPIO_INT_MASK1_REG (0x14) -#define TROUT_GPIO_INT_STAT1_REG (0x10) - -#define TROUT_GPIO_HAPTIC_PWM (28) -#define TROUT_GPIO_PS_HOLD (25) - -#define TROUT_GPIO_MISC2_BASE (TROUT_GPIO_START + 0x00) -#define TROUT_GPIO_MISC3_BASE (TROUT_GPIO_START + 0x08) -#define TROUT_GPIO_MISC4_BASE (TROUT_GPIO_START + 0x10) -#define TROUT_GPIO_MISC5_BASE (TROUT_GPIO_START + 0x18) -#define TROUT_GPIO_INT2_BASE (TROUT_GPIO_START + 0x20) -#define TROUT_GPIO_MISC1_BASE (TROUT_GPIO_START + 0x28) -#define TROUT_GPIO_VIRTUAL_BASE (TROUT_GPIO_START + 0x30) -#define TROUT_GPIO_INT5_BASE (TROUT_GPIO_START + 0x48) - -#define TROUT_GPIO_CHARGER_EN (TROUT_GPIO_MISC2_BASE + 0) -#define TROUT_GPIO_ISET (TROUT_GPIO_MISC2_BASE + 1) -#define TROUT_GPIO_H2W_DAT_DIR (TROUT_GPIO_MISC2_BASE + 2) -#define TROUT_GPIO_H2W_CLK_DIR (TROUT_GPIO_MISC2_BASE + 3) -#define TROUT_GPIO_H2W_DAT_GPO (TROUT_GPIO_MISC2_BASE + 4) -#define TROUT_GPIO_H2W_CLK_GPO (TROUT_GPIO_MISC2_BASE + 5) -#define TROUT_GPIO_H2W_SEL0 (TROUT_GPIO_MISC2_BASE + 6) -#define TROUT_GPIO_H2W_SEL1 (TROUT_GPIO_MISC2_BASE + 7) - -#define TROUT_GPIO_SPOTLIGHT_EN (TROUT_GPIO_MISC3_BASE + 0) -#define TROUT_GPIO_FLASH_EN (TROUT_GPIO_MISC3_BASE + 1) -#define TROUT_GPIO_I2C_PULL (TROUT_GPIO_MISC3_BASE + 2) -#define TROUT_GPIO_TP_I2C_PULL (TROUT_GPIO_MISC3_BASE + 3) -#define TROUT_GPIO_TP_EN (TROUT_GPIO_MISC3_BASE + 4) -#define TROUT_GPIO_JOG_EN (TROUT_GPIO_MISC3_BASE + 5) -#define TROUT_GPIO_UI_LED_EN (TROUT_GPIO_MISC3_BASE + 6) -#define TROUT_GPIO_QTKEY_LED_EN (TROUT_GPIO_MISC3_BASE + 7) - -#define TROUT_GPIO_VCM_PWDN (TROUT_GPIO_MISC4_BASE + 0) -#define TROUT_GPIO_USB_H2W_SW (TROUT_GPIO_MISC4_BASE + 1) -#define TROUT_GPIO_COMPASS_RST_N (TROUT_GPIO_MISC4_BASE + 2) -#define TROUT_GPIO_HAPTIC_EN_UP (TROUT_GPIO_MISC4_BASE + 3) -#define TROUT_GPIO_HAPTIC_EN_MAIN (TROUT_GPIO_MISC4_BASE + 4) -#define TROUT_GPIO_USB_PHY_RST_N (TROUT_GPIO_MISC4_BASE + 5) -#define TROUT_GPIO_WIFI_PA_RESETX (TROUT_GPIO_MISC4_BASE + 6) -#define TROUT_GPIO_WIFI_EN (TROUT_GPIO_MISC4_BASE + 7) - -#define TROUT_GPIO_BT_32K_EN (TROUT_GPIO_MISC5_BASE + 0) -#define TROUT_GPIO_MAC_32K_EN (TROUT_GPIO_MISC5_BASE + 1) -#define TROUT_GPIO_MDDI_32K_EN (TROUT_GPIO_MISC5_BASE + 2) -#define TROUT_GPIO_COMPASS_32K_EN (TROUT_GPIO_MISC5_BASE + 3) - -#define TROUT_GPIO_NAVI_ACT_N (TROUT_GPIO_INT2_BASE + 0) -#define TROUT_GPIO_COMPASS_IRQ (TROUT_GPIO_INT2_BASE + 1) -#define TROUT_GPIO_SLIDING_DET (TROUT_GPIO_INT2_BASE + 2) -#define TROUT_GPIO_AUD_HSMIC_DET_N (TROUT_GPIO_INT2_BASE + 3) -#define TROUT_GPIO_SD_DOOR_N (TROUT_GPIO_INT2_BASE + 4) -#define TROUT_GPIO_CAM_BTN_STEP1_N (TROUT_GPIO_INT2_BASE + 5) -#define TROUT_GPIO_CAM_BTN_STEP2_N (TROUT_GPIO_INT2_BASE + 6) -#define TROUT_GPIO_TP_ATT_N (TROUT_GPIO_INT2_BASE + 7) -#define TROUT_GPIO_BANK0_FIRST_INT_SOURCE (TROUT_GPIO_NAVI_ACT_N) -#define TROUT_GPIO_BANK0_LAST_INT_SOURCE (TROUT_GPIO_TP_ATT_N) - -#define TROUT_GPIO_H2W_DAT_GPI (TROUT_GPIO_MISC1_BASE + 0) -#define TROUT_GPIO_H2W_CLK_GPI (TROUT_GPIO_MISC1_BASE + 1) -#define TROUT_GPIO_CPLD128_VER_0 (TROUT_GPIO_MISC1_BASE + 4) -#define TROUT_GPIO_CPLD128_VER_1 (TROUT_GPIO_MISC1_BASE + 5) -#define TROUT_GPIO_CPLD128_VER_2 (TROUT_GPIO_MISC1_BASE + 6) -#define TROUT_GPIO_CPLD128_VER_3 (TROUT_GPIO_MISC1_BASE + 7) - -#define TROUT_GPIO_SDMC_CD_N (TROUT_GPIO_VIRTUAL_BASE + 0) -#define TROUT_GPIO_END (TROUT_GPIO_SDMC_CD_N) -#define TROUT_GPIO_BANK1_FIRST_INT_SOURCE (TROUT_GPIO_SDMC_CD_N) -#define TROUT_GPIO_BANK1_LAST_INT_SOURCE (TROUT_GPIO_SDMC_CD_N) - -#define TROUT_GPIO_VIRTUAL_TO_REAL_OFFSET \ - (TROUT_GPIO_INT5_BASE - TROUT_GPIO_VIRTUAL_BASE) - -#define TROUT_INT_START (NR_MSM_IRQS + NR_GPIO_IRQS) -#define TROUT_INT_BANK0_COUNT (8) -#define TROUT_INT_BANK1_START (TROUT_INT_START + TROUT_INT_BANK0_COUNT) -#define TROUT_INT_BANK1_COUNT (1) -#define TROUT_INT_END (TROUT_INT_START + TROUT_INT_BANK0_COUNT + \ - TROUT_INT_BANK1_COUNT - 1) -#define TROUT_GPIO_TO_INT(n) (((n) <= TROUT_GPIO_BANK0_LAST_INT_SOURCE) ? \ - (TROUT_INT_START - TROUT_GPIO_BANK0_FIRST_INT_SOURCE + (n)) : \ - (TROUT_INT_BANK1_START - TROUT_GPIO_BANK1_FIRST_INT_SOURCE + (n))) - -#define TROUT_INT_TO_BANK(n) ((n - TROUT_INT_START) / TROUT_INT_BANK0_COUNT) -#define TROUT_INT_TO_MASK(n) (1U << ((n - TROUT_INT_START) & 7)) -#define TROUT_BANK_TO_MASK_REG(bank) \ - (bank ? TROUT_GPIO_INT_MASK1_REG : TROUT_GPIO_INT_MASK0_REG) -#define TROUT_BANK_TO_STAT_REG(bank) \ - (bank ? TROUT_GPIO_INT_STAT1_REG : TROUT_GPIO_INT_STAT0_REG) - -#endif /* GUARD */ diff --git a/arch/arm/mach-msm/clock-pcom.c b/arch/arm/mach-msm/clock-pcom.c deleted file mode 100644 index f5b69d736ee5..000000000000 --- a/arch/arm/mach-msm/clock-pcom.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/clk-provider.h> -#include <linux/clkdev.h> - -#include <mach/clk.h> - -#include "proc_comm.h" -#include "clock.h" -#include "clock-pcom.h" - -struct clk_pcom { - unsigned id; - unsigned long flags; - struct msm_clk msm_clk; -}; - -static inline struct clk_pcom *to_clk_pcom(struct clk_hw *hw) -{ - return container_of(to_msm_clk(hw), struct clk_pcom, msm_clk); -} - -static int pc_clk_enable(struct clk_hw *hw) -{ - unsigned id = to_clk_pcom(hw)->id; - int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL); - if (rc < 0) - return rc; - else - return (int)id < 0 ? -EINVAL : 0; -} - -static void pc_clk_disable(struct clk_hw *hw) -{ - unsigned id = to_clk_pcom(hw)->id; - msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL); -} - -static int pc_clk_reset(struct clk_hw *hw, enum clk_reset_action action) -{ - int rc; - unsigned id = to_clk_pcom(hw)->id; - - if (action == CLK_RESET_ASSERT) - rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_ASSERT, &id, NULL); - else - rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_DEASSERT, &id, NULL); - - if (rc < 0) - return rc; - else - return (int)id < 0 ? -EINVAL : 0; -} - -static int pc_clk_set_rate(struct clk_hw *hw, unsigned long new_rate, - unsigned long p_rate) -{ - struct clk_pcom *p = to_clk_pcom(hw); - unsigned id = p->id, rate = new_rate; - int rc; - - /* - * The rate _might_ be rounded off to the nearest KHz value by the - * remote function. So a return value of 0 doesn't necessarily mean - * that the exact rate was set successfully. - */ - if (p->flags & CLKFLAG_MIN) - rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate); - else - rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate); - if (rc < 0) - return rc; - else - return (int)id < 0 ? -EINVAL : 0; -} - -static unsigned long pc_clk_recalc_rate(struct clk_hw *hw, unsigned long p_rate) -{ - unsigned id = to_clk_pcom(hw)->id; - if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL)) - return 0; - else - return id; -} - -static int pc_clk_is_enabled(struct clk_hw *hw) -{ - unsigned id = to_clk_pcom(hw)->id; - if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL)) - return 0; - else - return id; -} - -static long pc_clk_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *p_rate) -{ - /* Not really supported; pc_clk_set_rate() does rounding on it's own. */ - return rate; -} - -static struct clk_ops clk_ops_pcom = { - .enable = pc_clk_enable, - .disable = pc_clk_disable, - .set_rate = pc_clk_set_rate, - .recalc_rate = pc_clk_recalc_rate, - .is_enabled = pc_clk_is_enabled, - .round_rate = pc_clk_round_rate, -}; - -static int msm_clock_pcom_probe(struct platform_device *pdev) -{ - const struct pcom_clk_pdata *pdata = pdev->dev.platform_data; - int i, ret; - - for (i = 0; i < pdata->num_lookups; i++) { - const struct clk_pcom_desc *desc = &pdata->lookup[i]; - struct clk *c; - struct clk_pcom *p; - struct clk_hw *hw; - struct clk_init_data init; - - p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); - if (!p) - return -ENOMEM; - - p->id = desc->id; - p->flags = desc->flags; - p->msm_clk.reset = pc_clk_reset; - - hw = &p->msm_clk.hw; - hw->init = &init; - - init.name = desc->name; - init.ops = &clk_ops_pcom; - init.num_parents = 0; - init.flags = CLK_IS_ROOT; - - if (!(p->flags & CLKFLAG_AUTO_OFF)) - init.flags |= CLK_IGNORE_UNUSED; - - c = devm_clk_register(&pdev->dev, hw); - ret = clk_register_clkdev(c, desc->con, desc->dev); - if (ret) - return ret; - } - - return 0; -} - -static struct platform_driver msm_clock_pcom_driver = { - .probe = msm_clock_pcom_probe, - .driver = { - .name = "msm-clock-pcom", - }, -}; -module_platform_driver(msm_clock_pcom_driver); - -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-msm/clock-pcom.h b/arch/arm/mach-msm/clock-pcom.h deleted file mode 100644 index 5bb164fd46a8..000000000000 --- a/arch/arm/mach-msm/clock-pcom.h +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H -#define __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H - -/* clock IDs used by the modem processor */ - -#define P_ACPU_CLK 0 /* Applications processor clock */ -#define P_ADM_CLK 1 /* Applications data mover clock */ -#define P_ADSP_CLK 2 /* ADSP clock */ -#define P_EBI1_CLK 3 /* External bus interface 1 clock */ -#define P_EBI2_CLK 4 /* External bus interface 2 clock */ -#define P_ECODEC_CLK 5 /* External CODEC clock */ -#define P_EMDH_CLK 6 /* External MDDI host clock */ -#define P_GP_CLK 7 /* General purpose clock */ -#define P_GRP_3D_CLK 8 /* Graphics clock */ -#define P_I2C_CLK 9 /* I2C clock */ -#define P_ICODEC_RX_CLK 10 /* Internal CODEX RX clock */ -#define P_ICODEC_TX_CLK 11 /* Internal CODEX TX clock */ -#define P_IMEM_CLK 12 /* Internal graphics memory clock */ -#define P_MDC_CLK 13 /* MDDI client clock */ -#define P_MDP_CLK 14 /* Mobile display processor clock */ -#define P_PBUS_CLK 15 /* Peripheral bus clock */ -#define P_PCM_CLK 16 /* PCM clock */ -#define P_PMDH_CLK 17 /* Primary MDDI host clock */ -#define P_SDAC_CLK 18 /* Stereo DAC clock */ -#define P_SDC1_CLK 19 /* Secure Digital Card clocks */ -#define P_SDC1_P_CLK 20 -#define P_SDC2_CLK 21 -#define P_SDC2_P_CLK 22 -#define P_SDC3_CLK 23 -#define P_SDC3_P_CLK 24 -#define P_SDC4_CLK 25 -#define P_SDC4_P_CLK 26 -#define P_TSIF_CLK 27 /* Transport Stream Interface clocks */ -#define P_TSIF_REF_CLK 28 -#define P_TV_DAC_CLK 29 /* TV clocks */ -#define P_TV_ENC_CLK 30 -#define P_UART1_CLK 31 /* UART clocks */ -#define P_UART2_CLK 32 -#define P_UART3_CLK 33 -#define P_UART1DM_CLK 34 -#define P_UART2DM_CLK 35 -#define P_USB_HS_CLK 36 /* High speed USB core clock */ -#define P_USB_HS_P_CLK 37 /* High speed USB pbus clock */ -#define P_USB_OTG_CLK 38 /* Full speed USB clock */ -#define P_VDC_CLK 39 /* Video controller clock */ -#define P_VFE_MDC_CLK 40 /* Camera / Video Front End clock */ -#define P_VFE_CLK 41 /* VFE MDDI client clock */ -#define P_MDP_LCDC_PCLK_CLK 42 -#define P_MDP_LCDC_PAD_PCLK_CLK 43 -#define P_MDP_VSYNC_CLK 44 -#define P_SPI_CLK 45 -#define P_VFE_AXI_CLK 46 -#define P_USB_HS2_CLK 47 /* High speed USB 2 core clock */ -#define P_USB_HS2_P_CLK 48 /* High speed USB 2 pbus clock */ -#define P_USB_HS3_CLK 49 /* High speed USB 3 core clock */ -#define P_USB_HS3_P_CLK 50 /* High speed USB 3 pbus clock */ -#define P_GRP_3D_P_CLK 51 /* Graphics pbus clock */ -#define P_USB_PHY_CLK 52 /* USB PHY clock */ -#define P_USB_HS_CORE_CLK 53 /* High speed USB 1 core clock */ -#define P_USB_HS2_CORE_CLK 54 /* High speed USB 2 core clock */ -#define P_USB_HS3_CORE_CLK 55 /* High speed USB 3 core clock */ -#define P_CAM_M_CLK 56 -#define P_CAMIF_PAD_P_CLK 57 -#define P_GRP_2D_CLK 58 -#define P_GRP_2D_P_CLK 59 -#define P_I2S_CLK 60 -#define P_JPEG_CLK 61 -#define P_JPEG_P_CLK 62 -#define P_LPA_CODEC_CLK 63 -#define P_LPA_CORE_CLK 64 -#define P_LPA_P_CLK 65 -#define P_MDC_IO_CLK 66 -#define P_MDC_P_CLK 67 -#define P_MFC_CLK 68 -#define P_MFC_DIV2_CLK 69 -#define P_MFC_P_CLK 70 -#define P_QUP_I2C_CLK 71 -#define P_ROTATOR_IMEM_CLK 72 -#define P_ROTATOR_P_CLK 73 -#define P_VFE_CAMIF_CLK 74 -#define P_VFE_P_CLK 75 -#define P_VPE_CLK 76 -#define P_I2C_2_CLK 77 -#define P_MI2S_CODEC_RX_S_CLK 78 -#define P_MI2S_CODEC_RX_M_CLK 79 -#define P_MI2S_CODEC_TX_S_CLK 80 -#define P_MI2S_CODEC_TX_M_CLK 81 -#define P_PMDH_P_CLK 82 -#define P_EMDH_P_CLK 83 -#define P_SPI_P_CLK 84 -#define P_TSIF_P_CLK 85 -#define P_MDP_P_CLK 86 -#define P_SDAC_M_CLK 87 -#define P_MI2S_S_CLK 88 -#define P_MI2S_M_CLK 89 -#define P_AXI_ROTATOR_CLK 90 -#define P_HDMI_CLK 91 -#define P_CSI0_CLK 92 -#define P_CSI0_VFE_CLK 93 -#define P_CSI0_P_CLK 94 -#define P_CSI1_CLK 95 -#define P_CSI1_VFE_CLK 96 -#define P_CSI1_P_CLK 97 -#define P_GSBI_CLK 98 -#define P_GSBI_P_CLK 99 -#define P_CE_CLK 100 /* Crypto engine */ -#define P_CODEC_SSBI_CLK 101 - -#define P_NR_CLKS 102 - -struct clk_pcom_desc { - unsigned id; - const char *name; - const char *con; - const char *dev; - unsigned long flags; -}; - -struct pcom_clk_pdata { - struct clk_pcom_desc *lookup; - u32 num_lookups; -}; - -#define CLK_PCOM(clk_name, clk_id, clk_dev, clk_flags) { \ - .id = P_##clk_id, \ - .name = #clk_id, \ - .con = clk_name, \ - .dev = clk_dev, \ - .flags = clk_flags, \ - } - -#endif diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c deleted file mode 100644 index 35ea02b52483..000000000000 --- a/arch/arm/mach-msm/clock.c +++ /dev/null @@ -1,28 +0,0 @@ -/* arch/arm/mach-msm/clock.c - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/clk-provider.h> -#include <linux/module.h> - -#include "clock.h" - -int clk_reset(struct clk *clk, enum clk_reset_action action) -{ - struct clk_hw *hw = __clk_get_hw(clk); - struct msm_clk *m = to_msm_clk(hw); - return m->reset(hw, action); -} -EXPORT_SYMBOL(clk_reset); diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h deleted file mode 100644 index 42d29dd7aafc..000000000000 --- a/arch/arm/mach-msm/clock.h +++ /dev/null @@ -1,43 +0,0 @@ -/* arch/arm/mach-msm/clock.h - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ARCH_ARM_MACH_MSM_CLOCK_H -#define __ARCH_ARM_MACH_MSM_CLOCK_H - -#include <linux/clk-provider.h> -#include <mach/clk.h> - -#define CLK_FIRST_AVAILABLE_FLAG 0x00000100 -#define CLKFLAG_AUTO_OFF 0x00000200 -#define CLKFLAG_MIN 0x00000400 -#define CLKFLAG_MAX 0x00000800 - -#define OFF CLKFLAG_AUTO_OFF -#define CLK_MIN CLKFLAG_MIN -#define CLK_MAX CLKFLAG_MAX -#define CLK_MINMAX (CLK_MIN | CLK_MAX) - -struct msm_clk { - int (*reset)(struct clk_hw *hw, enum clk_reset_action action); - struct clk_hw hw; -}; - -static inline struct msm_clk *to_msm_clk(struct clk_hw *hw) -{ - return container_of(hw, struct msm_clk, hw); -} - -#endif diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h deleted file mode 100644 index 572479a3c7be..000000000000 --- a/arch/arm/mach-msm/common.h +++ /dev/null @@ -1,41 +0,0 @@ -/* Copyright (c) 2012, The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __MACH_COMMON_H -#define __MACH_COMMON_H - -extern void msm7x01_timer_init(void); -extern void msm7x30_timer_init(void); -extern void qsd8x50_timer_init(void); - -extern void msm_map_common_io(void); -extern void msm_map_msm7x30_io(void); -extern void msm_map_qsd8x50_io(void); - -extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size, - unsigned int mtype, void *caller); - -struct msm_mmc_platform_data; - -extern void msm_add_devices(void); -extern void msm_init_irq(void); -extern void msm_init_gpio(void); -extern int msm_add_sdcc(unsigned int controller, - struct msm_mmc_platform_data *plat, - unsigned int stat_irq, unsigned long stat_irq_flags); - -#if defined(CONFIG_MSM_SMD) && defined(CONFIG_DEBUG_FS) -extern int smd_debugfs_init(void); -#else -static inline int smd_debugfs_init(void) { return 0; } -#endif - -#endif diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c deleted file mode 100644 index d83404d4b328..000000000000 --- a/arch/arm/mach-msm/devices-msm7x00.c +++ /dev/null @@ -1,480 +0,0 @@ -/* linux/arch/arm/mach-msm/devices.c - * - * Copyright (C) 2008 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/clkdev.h> - -#include <mach/irqs.h> -#include <mach/msm_iomap.h> -#include "devices.h" - -#include <asm/mach/flash.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> - -#include "clock.h" -#include "clock-pcom.h" -#include <linux/platform_data/mmc-msm_sdcc.h> - -static struct resource msm_gpio_resources[] = { - { - .start = 32 + 0, - .end = 32 + 0, - .flags = IORESOURCE_IRQ, - }, - { - .start = 32 + 1, - .end = 32 + 1, - .flags = IORESOURCE_IRQ, - }, - { - .start = 0xa9200800, - .end = 0xa9200800 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "gpio1" - }, - { - .start = 0xa9300C00, - .end = 0xa9300C00 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "gpio2" - }, -}; - -struct platform_device msm_device_gpio_7201 = { - .name = "gpio-msm-7201", - .num_resources = ARRAY_SIZE(msm_gpio_resources), - .resource = msm_gpio_resources, -}; - -static struct resource resources_uart1[] = { - { - .start = INT_UART1, - .end = INT_UART1, - .flags = IORESOURCE_IRQ, - }, - { - .start = MSM_UART1_PHYS, - .end = MSM_UART1_PHYS + MSM_UART1_SIZE - 1, - .flags = IORESOURCE_MEM, - .name = "uart_resource" - }, -}; - -static struct resource resources_uart2[] = { - { - .start = INT_UART2, - .end = INT_UART2, - .flags = IORESOURCE_IRQ, - }, - { - .start = MSM_UART2_PHYS, - .end = MSM_UART2_PHYS + MSM_UART2_SIZE - 1, - .flags = IORESOURCE_MEM, - .name = "uart_resource" - }, -}; - -static struct resource resources_uart3[] = { - { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, - { - .start = MSM_UART3_PHYS, - .end = MSM_UART3_PHYS + MSM_UART3_SIZE - 1, - .flags = IORESOURCE_MEM, - .name = "uart_resource" - }, -}; - -struct platform_device msm_device_uart1 = { - .name = "msm_serial", - .id = 0, - .num_resources = ARRAY_SIZE(resources_uart1), - .resource = resources_uart1, -}; - -struct platform_device msm_device_uart2 = { - .name = "msm_serial", - .id = 1, - .num_resources = ARRAY_SIZE(resources_uart2), - .resource = resources_uart2, -}; - -struct platform_device msm_device_uart3 = { - .name = "msm_serial", - .id = 2, - .num_resources = ARRAY_SIZE(resources_uart3), - .resource = resources_uart3, -}; - -static struct resource resources_i2c[] = { - { - .start = MSM_I2C_PHYS, - .end = MSM_I2C_PHYS + MSM_I2C_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_PWB_I2C, - .end = INT_PWB_I2C, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_i2c = { - .name = "msm_i2c", - .id = 0, - .num_resources = ARRAY_SIZE(resources_i2c), - .resource = resources_i2c, -}; - -static struct resource resources_hsusb[] = { - { - .start = MSM_HSUSB_PHYS, - .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_HS, - .end = INT_USB_HS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_hsusb = { - .name = "msm_hsusb", - .id = -1, - .num_resources = ARRAY_SIZE(resources_hsusb), - .resource = resources_hsusb, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -struct flash_platform_data msm_nand_data = { - .parts = NULL, - .nr_parts = 0, -}; - -static struct resource resources_nand[] = { - [0] = { - .start = 7, - .end = 7, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device msm_device_nand = { - .name = "msm_nand", - .id = -1, - .num_resources = ARRAY_SIZE(resources_nand), - .resource = resources_nand, - .dev = { - .platform_data = &msm_nand_data, - }, -}; - -struct platform_device msm_device_smd = { - .name = "msm_smd", - .id = -1, -}; - -static struct resource resources_sdc1[] = { - { - .start = MSM_SDC1_PHYS, - .end = MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_SDC1_0, - .end = INT_SDC1_0, - .flags = IORESOURCE_IRQ, - .name = "cmd_irq", - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, - .name = "status_irq" - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_DMA, - }, -}; - -static struct resource resources_sdc2[] = { - { - .start = MSM_SDC2_PHYS, - .end = MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_SDC2_0, - .end = INT_SDC2_0, - .flags = IORESOURCE_IRQ, - .name = "cmd_irq", - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, - .name = "status_irq" - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_DMA, - }, -}; - -static struct resource resources_sdc3[] = { - { - .start = MSM_SDC3_PHYS, - .end = MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_SDC3_0, - .end = INT_SDC3_0, - .flags = IORESOURCE_IRQ, - .name = "cmd_irq", - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, - .name = "status_irq" - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_DMA, - }, -}; - -static struct resource resources_sdc4[] = { - { - .start = MSM_SDC4_PHYS, - .end = MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_SDC4_0, - .end = INT_SDC4_0, - .flags = IORESOURCE_IRQ, - .name = "cmd_irq", - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, - .name = "status_irq" - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device msm_device_sdc1 = { - .name = "msm_sdcc", - .id = 1, - .num_resources = ARRAY_SIZE(resources_sdc1), - .resource = resources_sdc1, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -struct platform_device msm_device_sdc2 = { - .name = "msm_sdcc", - .id = 2, - .num_resources = ARRAY_SIZE(resources_sdc2), - .resource = resources_sdc2, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -struct platform_device msm_device_sdc3 = { - .name = "msm_sdcc", - .id = 3, - .num_resources = ARRAY_SIZE(resources_sdc3), - .resource = resources_sdc3, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -struct platform_device msm_device_sdc4 = { - .name = "msm_sdcc", - .id = 4, - .num_resources = ARRAY_SIZE(resources_sdc4), - .resource = resources_sdc4, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct platform_device *msm_sdcc_devices[] __initdata = { - &msm_device_sdc1, - &msm_device_sdc2, - &msm_device_sdc3, - &msm_device_sdc4, -}; - -int __init msm_add_sdcc(unsigned int controller, - struct msm_mmc_platform_data *plat, - unsigned int stat_irq, unsigned long stat_irq_flags) -{ - struct platform_device *pdev; - struct resource *res; - - if (controller < 1 || controller > 4) - return -EINVAL; - - pdev = msm_sdcc_devices[controller-1]; - pdev->dev.platform_data = plat; - - res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq"); - if (!res) - return -EINVAL; - else if (stat_irq) { - res->start = res->end = stat_irq; - res->flags &= ~IORESOURCE_DISABLED; - res->flags |= stat_irq_flags; - } - - return platform_device_register(pdev); -} - -static struct resource resources_mddi0[] = { - { - .start = MSM_PMDH_PHYS, - .end = MSM_PMDH_PHYS + MSM_PMDH_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_MDDI_PRI, - .end = INT_MDDI_PRI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource resources_mddi1[] = { - { - .start = MSM_EMDH_PHYS, - .end = MSM_EMDH_PHYS + MSM_EMDH_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_MDDI_EXT, - .end = INT_MDDI_EXT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_mddi0 = { - .name = "msm_mddi", - .id = 0, - .num_resources = ARRAY_SIZE(resources_mddi0), - .resource = resources_mddi0, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -struct platform_device msm_device_mddi1 = { - .name = "msm_mddi", - .id = 1, - .num_resources = ARRAY_SIZE(resources_mddi1), - .resource = resources_mddi1, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct resource resources_mdp[] = { - { - .start = MSM_MDP_PHYS, - .end = MSM_MDP_PHYS + MSM_MDP_SIZE - 1, - .name = "mdp", - .flags = IORESOURCE_MEM - }, - { - .start = INT_MDP, - .end = INT_MDP, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_mdp = { - .name = "msm_mdp", - .id = 0, - .num_resources = ARRAY_SIZE(resources_mdp), - .resource = resources_mdp, -}; - -static struct clk_pcom_desc msm_clocks_7x01a[] = { - CLK_PCOM("adm_clk", ADM_CLK, NULL, 0), - CLK_PCOM("adsp_clk", ADSP_CLK, NULL, 0), - CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, 0), - CLK_PCOM("ebi2_clk", EBI2_CLK, NULL, 0), - CLK_PCOM("ecodec_clk", ECODEC_CLK, NULL, 0), - CLK_PCOM("emdh_clk", EMDH_CLK, NULL, OFF), - CLK_PCOM("gp_clk", GP_CLK, NULL, 0), - CLK_PCOM("grp_clk", GRP_3D_CLK, NULL, OFF), - CLK_PCOM("i2c_clk", I2C_CLK, "msm_i2c.0", 0), - CLK_PCOM("icodec_rx_clk", ICODEC_RX_CLK, NULL, 0), - CLK_PCOM("icodec_tx_clk", ICODEC_TX_CLK, NULL, 0), - CLK_PCOM("imem_clk", IMEM_CLK, NULL, OFF), - CLK_PCOM("mdc_clk", MDC_CLK, NULL, 0), - CLK_PCOM("mdp_clk", MDP_CLK, NULL, OFF), - CLK_PCOM("pbus_clk", PBUS_CLK, NULL, 0), - CLK_PCOM("pcm_clk", PCM_CLK, NULL, 0), - CLK_PCOM("mddi_clk", PMDH_CLK, NULL, OFF | CLK_MINMAX), - CLK_PCOM("sdac_clk", SDAC_CLK, NULL, OFF), - CLK_PCOM("sdc_clk", SDC1_CLK, "msm_sdcc.1", OFF), - CLK_PCOM("sdc_pclk", SDC1_P_CLK, "msm_sdcc.1", OFF), - CLK_PCOM("sdc_clk", SDC2_CLK, "msm_sdcc.2", OFF), - CLK_PCOM("sdc_pclk", SDC2_P_CLK, "msm_sdcc.2", OFF), - CLK_PCOM("sdc_clk", SDC3_CLK, "msm_sdcc.3", OFF), - CLK_PCOM("sdc_pclk", SDC3_P_CLK, "msm_sdcc.3", OFF), - CLK_PCOM("sdc_clk", SDC4_CLK, "msm_sdcc.4", OFF), - CLK_PCOM("sdc_pclk", SDC4_P_CLK, "msm_sdcc.4", OFF), - CLK_PCOM("tsif_clk", TSIF_CLK, NULL, 0), - CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0), - CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), - CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), - CLK_PCOM("core", UART1_CLK, "msm_serial.0", OFF), - CLK_PCOM("core", UART2_CLK, "msm_serial.1", 0), - CLK_PCOM("core", UART3_CLK, "msm_serial.2", OFF), - CLK_PCOM("uart1dm_clk", UART1DM_CLK, NULL, OFF), - CLK_PCOM("uart2dm_clk", UART2DM_CLK, NULL, 0), - CLK_PCOM("usb_hs_clk", USB_HS_CLK, "msm_hsusb", OFF), - CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, "msm_hsusb", OFF), - CLK_PCOM("usb_otg_clk", USB_OTG_CLK, NULL, 0), - CLK_PCOM("vdc_clk", VDC_CLK, NULL, OFF ), - CLK_PCOM("vfe_clk", VFE_CLK, NULL, OFF), - CLK_PCOM("vfe_mdc_clk", VFE_MDC_CLK, NULL, OFF), -}; - -static struct pcom_clk_pdata msm_clock_7x01a_pdata = { - .lookup = msm_clocks_7x01a, - .num_lookups = ARRAY_SIZE(msm_clocks_7x01a), -}; - -struct platform_device msm_clock_7x01a = { - .name = "msm-clock-pcom", - .dev.platform_data = &msm_clock_7x01a_pdata, -}; diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c deleted file mode 100644 index c15ea8ab20a7..000000000000 --- a/arch/arm/mach-msm/devices-msm7x30.c +++ /dev/null @@ -1,246 +0,0 @@ -/* - * Copyright (C) 2008 Google, Inc. - * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <linux/dma-mapping.h> -#include <linux/clkdev.h> -#include <mach/irqs.h> -#include <mach/msm_iomap.h> -#include <mach/dma.h> - -#include "devices.h" -#include "smd_private.h" -#include "common.h" - -#include <asm/mach/flash.h> - -#include "clock.h" -#include "clock-pcom.h" - -#include <linux/platform_data/mmc-msm_sdcc.h> - -static struct resource msm_gpio_resources[] = { - { - .start = 32 + 18, - .end = 32 + 18, - .flags = IORESOURCE_IRQ, - }, - { - .start = 32 + 19, - .end = 32 + 19, - .flags = IORESOURCE_IRQ, - }, - { - .start = 0xac001000, - .end = 0xac001000 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "gpio1" - }, - { - .start = 0xac101400, - .end = 0xac101400 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "gpio2" - }, -}; - -struct platform_device msm_device_gpio_7x30 = { - .name = "gpio-msm-7x30", - .num_resources = ARRAY_SIZE(msm_gpio_resources), - .resource = msm_gpio_resources, -}; - -static struct resource resources_uart2[] = { - { - .start = INT_UART2, - .end = INT_UART2, - .flags = IORESOURCE_IRQ, - }, - { - .start = MSM_UART2_PHYS, - .end = MSM_UART2_PHYS + MSM_UART2_SIZE - 1, - .flags = IORESOURCE_MEM, - .name = "uart_resource" - }, -}; - -struct platform_device msm_device_uart2 = { - .name = "msm_serial", - .id = 1, - .num_resources = ARRAY_SIZE(resources_uart2), - .resource = resources_uart2, -}; - -struct platform_device msm_device_smd = { - .name = "msm_smd", - .id = -1, -}; - -static struct resource resources_otg[] = { - { - .start = MSM_HSUSB_PHYS, - .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_HS, - .end = INT_USB_HS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_otg = { - .name = "msm_otg", - .id = -1, - .num_resources = ARRAY_SIZE(resources_otg), - .resource = resources_otg, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct resource resources_hsusb[] = { - { - .start = MSM_HSUSB_PHYS, - .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_HS, - .end = INT_USB_HS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_hsusb = { - .name = "msm_hsusb", - .id = -1, - .num_resources = ARRAY_SIZE(resources_hsusb), - .resource = resources_hsusb, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static u64 dma_mask = 0xffffffffULL; -static struct resource resources_hsusb_host[] = { - { - .start = MSM_HSUSB_PHYS, - .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_HS, - .end = INT_USB_HS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_hsusb_host = { - .name = "msm_hsusb_host", - .id = -1, - .num_resources = ARRAY_SIZE(resources_hsusb_host), - .resource = resources_hsusb_host, - .dev = { - .dma_mask = &dma_mask, - .coherent_dma_mask = 0xffffffffULL, - }, -}; - -static struct clk_pcom_desc msm_clocks_7x30[] = { - CLK_PCOM("adm_clk", ADM_CLK, NULL, 0), - CLK_PCOM("adsp_clk", ADSP_CLK, NULL, 0), - CLK_PCOM("cam_m_clk", CAM_M_CLK, NULL, 0), - CLK_PCOM("camif_pad_pclk", CAMIF_PAD_P_CLK, NULL, OFF), - CLK_PCOM("ce_clk", CE_CLK, NULL, 0), - CLK_PCOM("codec_ssbi_clk", CODEC_SSBI_CLK, NULL, 0), - CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, CLK_MIN), - CLK_PCOM("ecodec_clk", ECODEC_CLK, NULL, 0), - CLK_PCOM("emdh_clk", EMDH_CLK, NULL, OFF | CLK_MINMAX), - CLK_PCOM("emdh_pclk", EMDH_P_CLK, NULL, OFF), - CLK_PCOM("gp_clk", GP_CLK, NULL, 0), - CLK_PCOM("grp_2d_clk", GRP_2D_CLK, NULL, 0), - CLK_PCOM("grp_2d_pclk", GRP_2D_P_CLK, NULL, 0), - CLK_PCOM("grp_clk", GRP_3D_CLK, NULL, 0), - CLK_PCOM("grp_pclk", GRP_3D_P_CLK, NULL, 0), - CLK_PCOM("hdmi_clk", HDMI_CLK, NULL, 0), - CLK_PCOM("imem_clk", IMEM_CLK, NULL, OFF), - CLK_PCOM("jpeg_clk", JPEG_CLK, NULL, OFF), - CLK_PCOM("jpeg_pclk", JPEG_P_CLK, NULL, OFF), - CLK_PCOM("lpa_codec_clk", LPA_CODEC_CLK, NULL, 0), - CLK_PCOM("lpa_core_clk", LPA_CORE_CLK, NULL, 0), - CLK_PCOM("lpa_pclk", LPA_P_CLK, NULL, 0), - CLK_PCOM("mdc_clk", MDC_CLK, NULL, 0), - CLK_PCOM("mddi_clk", PMDH_CLK, NULL, OFF | CLK_MINMAX), - CLK_PCOM("mddi_pclk", PMDH_P_CLK, NULL, 0), - CLK_PCOM("mdp_clk", MDP_CLK, NULL, OFF), - CLK_PCOM("mdp_pclk", MDP_P_CLK, NULL, 0), - CLK_PCOM("mdp_lcdc_pclk_clk", MDP_LCDC_PCLK_CLK, NULL, 0), - CLK_PCOM("mdp_lcdc_pad_pclk_clk", MDP_LCDC_PAD_PCLK_CLK, NULL, 0), - CLK_PCOM("mdp_vsync_clk", MDP_VSYNC_CLK, NULL, 0), - CLK_PCOM("mfc_clk", MFC_CLK, NULL, 0), - CLK_PCOM("mfc_div2_clk", MFC_DIV2_CLK, NULL, 0), - CLK_PCOM("mfc_pclk", MFC_P_CLK, NULL, 0), - CLK_PCOM("mi2s_m_clk", MI2S_M_CLK, NULL, 0), - CLK_PCOM("mi2s_s_clk", MI2S_S_CLK, NULL, 0), - CLK_PCOM("mi2s_codec_rx_m_clk", MI2S_CODEC_RX_M_CLK, NULL, 0), - CLK_PCOM("mi2s_codec_rx_s_clk", MI2S_CODEC_RX_S_CLK, NULL, 0), - CLK_PCOM("mi2s_codec_tx_m_clk", MI2S_CODEC_TX_M_CLK, NULL, 0), - CLK_PCOM("mi2s_codec_tx_s_clk", MI2S_CODEC_TX_S_CLK, NULL, 0), - CLK_PCOM("pbus_clk", PBUS_CLK, NULL, CLK_MIN), - CLK_PCOM("pcm_clk", PCM_CLK, NULL, 0), - CLK_PCOM("rotator_clk", AXI_ROTATOR_CLK, NULL, 0), - CLK_PCOM("rotator_imem_clk", ROTATOR_IMEM_CLK, NULL, OFF), - CLK_PCOM("rotator_pclk", ROTATOR_P_CLK, NULL, OFF), - CLK_PCOM("sdac_clk", SDAC_CLK, NULL, OFF), - CLK_PCOM("spi_clk", SPI_CLK, NULL, 0), - CLK_PCOM("spi_pclk", SPI_P_CLK, NULL, 0), - CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), - CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), - CLK_PCOM("core", UART2_CLK, "msm_serial.1", 0), - CLK_PCOM("usb_phy_clk", USB_PHY_CLK, NULL, 0), - CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF), - CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, NULL, OFF), - CLK_PCOM("usb_hs_core_clk", USB_HS_CORE_CLK, NULL, OFF), - CLK_PCOM("usb_hs2_clk", USB_HS2_CLK, NULL, OFF), - CLK_PCOM("usb_hs2_pclk", USB_HS2_P_CLK, NULL, OFF), - CLK_PCOM("usb_hs2_core_clk", USB_HS2_CORE_CLK, NULL, OFF), - CLK_PCOM("usb_hs3_clk", USB_HS3_CLK, NULL, OFF), - CLK_PCOM("usb_hs3_pclk", USB_HS3_P_CLK, NULL, OFF), - CLK_PCOM("usb_hs3_core_clk", USB_HS3_CORE_CLK, NULL, OFF), - CLK_PCOM("vdc_clk", VDC_CLK, NULL, OFF | CLK_MIN), - CLK_PCOM("vfe_camif_clk", VFE_CAMIF_CLK, NULL, 0), - CLK_PCOM("vfe_clk", VFE_CLK, NULL, 0), - CLK_PCOM("vfe_mdc_clk", VFE_MDC_CLK, NULL, 0), - CLK_PCOM("vfe_pclk", VFE_P_CLK, NULL, OFF), - CLK_PCOM("vpe_clk", VPE_CLK, NULL, 0), - - /* 7x30 v2 hardware only. */ - CLK_PCOM("csi_clk", CSI0_CLK, NULL, 0), - CLK_PCOM("csi_pclk", CSI0_P_CLK, NULL, 0), - CLK_PCOM("csi_vfe_clk", CSI0_VFE_CLK, NULL, 0), -}; - -static struct pcom_clk_pdata msm_clock_7x30_pdata = { - .lookup = msm_clocks_7x30, - .num_lookups = ARRAY_SIZE(msm_clocks_7x30), -}; - -struct platform_device msm_clock_7x30 = { - .name = "msm-clock-pcom", - .dev.platform_data = &msm_clock_7x30_pdata, -}; diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c deleted file mode 100644 index 9e1e9ce07b1a..000000000000 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ /dev/null @@ -1,388 +0,0 @@ -/* - * Copyright (C) 2008 Google, Inc. - * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/clkdev.h> -#include <linux/dma-mapping.h> - -#include <mach/irqs.h> -#include <mach/msm_iomap.h> -#include <mach/dma.h> - -#include "devices.h" -#include "common.h" - -#include <asm/mach/flash.h> - -#include <linux/platform_data/mmc-msm_sdcc.h> -#include "clock.h" -#include "clock-pcom.h" - -static struct resource msm_gpio_resources[] = { - { - .start = 64 + 165 + 9, - .end = 64 + 165 + 9, - .flags = IORESOURCE_IRQ, - }, - { - .start = 64 + 165 + 10, - .end = 64 + 165 + 10, - .flags = IORESOURCE_IRQ, - }, - { - .start = 0xa9000800, - .end = 0xa9000800 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "gpio1" - }, - { - .start = 0xa9100C00, - .end = 0xa9100C00 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "gpio2" - }, -}; - -struct platform_device msm_device_gpio_8x50 = { - .name = "gpio-msm-8x50", - .num_resources = ARRAY_SIZE(msm_gpio_resources), - .resource = msm_gpio_resources, -}; - -static struct resource resources_uart3[] = { - { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, - { - .start = MSM_UART3_PHYS, - .end = MSM_UART3_PHYS + MSM_UART3_SIZE - 1, - .flags = IORESOURCE_MEM, - .name = "uart_resource" - }, -}; - -struct platform_device msm_device_uart3 = { - .name = "msm_serial", - .id = 2, - .num_resources = ARRAY_SIZE(resources_uart3), - .resource = resources_uart3, -}; - -struct platform_device msm_device_smd = { - .name = "msm_smd", - .id = -1, -}; - -static struct resource resources_otg[] = { - { - .start = MSM_HSUSB_PHYS, - .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_HS, - .end = INT_USB_HS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_otg = { - .name = "msm_otg", - .id = -1, - .num_resources = ARRAY_SIZE(resources_otg), - .resource = resources_otg, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct resource resources_hsusb[] = { - { - .start = MSM_HSUSB_PHYS, - .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_HS, - .end = INT_USB_HS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_hsusb = { - .name = "msm_hsusb", - .id = -1, - .num_resources = ARRAY_SIZE(resources_hsusb), - .resource = resources_hsusb, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static u64 dma_mask = 0xffffffffULL; -static struct resource resources_hsusb_host[] = { - { - .start = MSM_HSUSB_PHYS, - .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_HS, - .end = INT_USB_HS, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device msm_device_hsusb_host = { - .name = "msm_hsusb_host", - .id = -1, - .num_resources = ARRAY_SIZE(resources_hsusb_host), - .resource = resources_hsusb_host, - .dev = { - .dma_mask = &dma_mask, - .coherent_dma_mask = 0xffffffffULL, - }, -}; - -static struct resource resources_sdc1[] = { - { - .start = MSM_SDC1_PHYS, - .end = MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_SDC1_0, - .end = INT_SDC1_0, - .flags = IORESOURCE_IRQ, - .name = "cmd_irq", - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, - .name = "status_irq" - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_DMA, - }, -}; - -static struct resource resources_sdc2[] = { - { - .start = MSM_SDC2_PHYS, - .end = MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_SDC2_0, - .end = INT_SDC2_0, - .flags = IORESOURCE_IRQ, - .name = "cmd_irq", - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, - .name = "status_irq" - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_DMA, - }, -}; - -static struct resource resources_sdc3[] = { - { - .start = MSM_SDC3_PHYS, - .end = MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_SDC3_0, - .end = INT_SDC3_0, - .flags = IORESOURCE_IRQ, - .name = "cmd_irq", - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, - .name = "status_irq" - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_DMA, - }, -}; - -static struct resource resources_sdc4[] = { - { - .start = MSM_SDC4_PHYS, - .end = MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_SDC4_0, - .end = INT_SDC4_0, - .flags = IORESOURCE_IRQ, - .name = "cmd_irq", - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED, - .name = "status_irq" - }, - { - .start = 8, - .end = 8, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device msm_device_sdc1 = { - .name = "msm_sdcc", - .id = 1, - .num_resources = ARRAY_SIZE(resources_sdc1), - .resource = resources_sdc1, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -struct platform_device msm_device_sdc2 = { - .name = "msm_sdcc", - .id = 2, - .num_resources = ARRAY_SIZE(resources_sdc2), - .resource = resources_sdc2, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -struct platform_device msm_device_sdc3 = { - .name = "msm_sdcc", - .id = 3, - .num_resources = ARRAY_SIZE(resources_sdc3), - .resource = resources_sdc3, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -struct platform_device msm_device_sdc4 = { - .name = "msm_sdcc", - .id = 4, - .num_resources = ARRAY_SIZE(resources_sdc4), - .resource = resources_sdc4, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct platform_device *msm_sdcc_devices[] __initdata = { - &msm_device_sdc1, - &msm_device_sdc2, - &msm_device_sdc3, - &msm_device_sdc4, -}; - -int __init msm_add_sdcc(unsigned int controller, - struct msm_mmc_platform_data *plat, - unsigned int stat_irq, unsigned long stat_irq_flags) -{ - struct platform_device *pdev; - struct resource *res; - - if (controller < 1 || controller > 4) - return -EINVAL; - - pdev = msm_sdcc_devices[controller-1]; - pdev->dev.platform_data = plat; - - res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq"); - if (!res) - return -EINVAL; - else if (stat_irq) { - res->start = res->end = stat_irq; - res->flags &= ~IORESOURCE_DISABLED; - res->flags |= stat_irq_flags; - } - - return platform_device_register(pdev); -} - -static struct clk_pcom_desc msm_clocks_8x50[] = { - CLK_PCOM("adm_clk", ADM_CLK, NULL, 0), - CLK_PCOM("ce_clk", CE_CLK, NULL, 0), - CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, CLK_MIN), - CLK_PCOM("ebi2_clk", EBI2_CLK, NULL, 0), - CLK_PCOM("ecodec_clk", ECODEC_CLK, NULL, 0), - CLK_PCOM("emdh_clk", EMDH_CLK, NULL, OFF | CLK_MINMAX), - CLK_PCOM("gp_clk", GP_CLK, NULL, 0), - CLK_PCOM("grp_clk", GRP_3D_CLK, NULL, 0), - CLK_PCOM("i2c_clk", I2C_CLK, NULL, 0), - CLK_PCOM("icodec_rx_clk", ICODEC_RX_CLK, NULL, 0), - CLK_PCOM("icodec_tx_clk", ICODEC_TX_CLK, NULL, 0), - CLK_PCOM("imem_clk", IMEM_CLK, NULL, OFF), - CLK_PCOM("mdc_clk", MDC_CLK, NULL, 0), - CLK_PCOM("mddi_clk", PMDH_CLK, NULL, OFF | CLK_MINMAX), - CLK_PCOM("mdp_clk", MDP_CLK, NULL, OFF), - CLK_PCOM("mdp_lcdc_pclk_clk", MDP_LCDC_PCLK_CLK, NULL, 0), - CLK_PCOM("mdp_lcdc_pad_pclk_clk", MDP_LCDC_PAD_PCLK_CLK, NULL, 0), - CLK_PCOM("mdp_vsync_clk", MDP_VSYNC_CLK, NULL, 0), - CLK_PCOM("pbus_clk", PBUS_CLK, NULL, CLK_MIN), - CLK_PCOM("pcm_clk", PCM_CLK, NULL, 0), - CLK_PCOM("sdac_clk", SDAC_CLK, NULL, OFF), - CLK_PCOM("sdc_clk", SDC1_CLK, "msm_sdcc.1", OFF), - CLK_PCOM("sdc_pclk", SDC1_P_CLK, "msm_sdcc.1", OFF), - CLK_PCOM("sdc_clk", SDC2_CLK, "msm_sdcc.2", OFF), - CLK_PCOM("sdc_pclk", SDC2_P_CLK, "msm_sdcc.2", OFF), - CLK_PCOM("sdc_clk", SDC3_CLK, "msm_sdcc.3", OFF), - CLK_PCOM("sdc_pclk", SDC3_P_CLK, "msm_sdcc.3", OFF), - CLK_PCOM("sdc_clk", SDC4_CLK, "msm_sdcc.4", OFF), - CLK_PCOM("sdc_pclk", SDC4_P_CLK, "msm_sdcc.4", OFF), - CLK_PCOM("spi_clk", SPI_CLK, NULL, 0), - CLK_PCOM("tsif_clk", TSIF_CLK, NULL, 0), - CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0), - CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), - CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), - CLK_PCOM("core", UART1_CLK, NULL, OFF), - CLK_PCOM("core", UART2_CLK, NULL, 0), - CLK_PCOM("core", UART3_CLK, "msm_serial.2", OFF), - CLK_PCOM("uartdm_clk", UART1DM_CLK, NULL, OFF), - CLK_PCOM("uartdm_clk", UART2DM_CLK, NULL, 0), - CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF), - CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, NULL, OFF), - CLK_PCOM("usb_otg_clk", USB_OTG_CLK, NULL, 0), - CLK_PCOM("vdc_clk", VDC_CLK, NULL, OFF | CLK_MIN), - CLK_PCOM("vfe_clk", VFE_CLK, NULL, OFF), - CLK_PCOM("vfe_mdc_clk", VFE_MDC_CLK, NULL, OFF), - CLK_PCOM("vfe_axi_clk", VFE_AXI_CLK, NULL, OFF), - CLK_PCOM("usb_hs2_clk", USB_HS2_CLK, NULL, OFF), - CLK_PCOM("usb_hs2_pclk", USB_HS2_P_CLK, NULL, OFF), - CLK_PCOM("usb_hs3_clk", USB_HS3_CLK, NULL, OFF), - CLK_PCOM("usb_hs3_pclk", USB_HS3_P_CLK, NULL, OFF), - CLK_PCOM("usb_phy_clk", USB_PHY_CLK, NULL, 0), -}; - -static struct pcom_clk_pdata msm_clock_8x50_pdata = { - .lookup = msm_clocks_8x50, - .num_lookups = ARRAY_SIZE(msm_clocks_8x50), -}; - -struct platform_device msm_clock_8x50 = { - .name = "msm-clock-pcom", - .dev.platform_data = &msm_clock_8x50_pdata, -}; diff --git a/arch/arm/mach-msm/devices.h b/arch/arm/mach-msm/devices.h deleted file mode 100644 index dccefad9f9b9..000000000000 --- a/arch/arm/mach-msm/devices.h +++ /dev/null @@ -1,53 +0,0 @@ -/* linux/arch/arm/mach-msm/devices.h - * - * Copyright (C) 2008 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ARCH_ARM_MACH_MSM_DEVICES_H -#define __ARCH_ARM_MACH_MSM_DEVICES_H - -extern struct platform_device msm_device_gpio_7201; -extern struct platform_device msm_device_gpio_7x30; -extern struct platform_device msm_device_gpio_8x50; - -extern struct platform_device msm_device_uart1; -extern struct platform_device msm_device_uart2; -extern struct platform_device msm_device_uart3; - -extern struct platform_device msm8960_device_uart_gsbi2; -extern struct platform_device msm8960_device_uart_gsbi5; - -extern struct platform_device msm_device_sdc1; -extern struct platform_device msm_device_sdc2; -extern struct platform_device msm_device_sdc3; -extern struct platform_device msm_device_sdc4; - -extern struct platform_device msm_device_hsusb; -extern struct platform_device msm_device_otg; -extern struct platform_device msm_device_hsusb_host; - -extern struct platform_device msm_device_i2c; - -extern struct platform_device msm_device_smd; - -extern struct platform_device msm_device_nand; - -extern struct platform_device msm_device_mddi0; -extern struct platform_device msm_device_mddi1; -extern struct platform_device msm_device_mdp; - -extern struct platform_device msm_clock_7x01a; -extern struct platform_device msm_clock_7x30; -extern struct platform_device msm_clock_8x50; - -#endif diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c deleted file mode 100644 index fb9762464718..000000000000 --- a/arch/arm/mach-msm/dma.c +++ /dev/null @@ -1,298 +0,0 @@ -/* linux/arch/arm/mach-msm/dma.c - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/interrupt.h> -#include <linux/completion.h> -#include <linux/module.h> -#include <mach/dma.h> -#include <mach/msm_iomap.h> - -#define MSM_DMOV_CHANNEL_COUNT 16 - -#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2)) -#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2)) -#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2)) -#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2)) - -#if defined(CONFIG_ARCH_MSM7X30) -#define DMOV_SD_AARM DMOV_SD2 -#else -#define DMOV_SD_AARM DMOV_SD3 -#endif - -#define DMOV_CMD_PTR(ch) DMOV_SD_AARM(0x000, ch) -#define DMOV_RSLT(ch) DMOV_SD_AARM(0x040, ch) -#define DMOV_FLUSH0(ch) DMOV_SD_AARM(0x080, ch) -#define DMOV_FLUSH1(ch) DMOV_SD_AARM(0x0C0, ch) -#define DMOV_FLUSH2(ch) DMOV_SD_AARM(0x100, ch) -#define DMOV_FLUSH3(ch) DMOV_SD_AARM(0x140, ch) -#define DMOV_FLUSH4(ch) DMOV_SD_AARM(0x180, ch) -#define DMOV_FLUSH5(ch) DMOV_SD_AARM(0x1C0, ch) - -#define DMOV_STATUS(ch) DMOV_SD_AARM(0x200, ch) -#define DMOV_ISR DMOV_SD_AARM(0x380, 0) - -#define DMOV_CONFIG(ch) DMOV_SD_AARM(0x300, ch) - -enum { - MSM_DMOV_PRINT_ERRORS = 1, - MSM_DMOV_PRINT_IO = 2, - MSM_DMOV_PRINT_FLOW = 4 -}; - -static DEFINE_SPINLOCK(msm_dmov_lock); -static struct clk *msm_dmov_clk; -static unsigned int channel_active; -static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT]; -static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT]; -unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS; - -#define MSM_DMOV_DPRINTF(mask, format, args...) \ - do { \ - if ((mask) & msm_dmov_print_mask) \ - printk(KERN_ERR format, args); \ - } while (0) -#define PRINT_ERROR(format, args...) \ - MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_ERRORS, format, args); -#define PRINT_IO(format, args...) \ - MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_IO, format, args); -#define PRINT_FLOW(format, args...) \ - MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_FLOW, format, args); - -void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful) -{ - writel((graceful << 31), DMOV_FLUSH0(id)); -} -EXPORT_SYMBOL_GPL(msm_dmov_stop_cmd); - -void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) -{ - unsigned long irq_flags; - unsigned int status; - - spin_lock_irqsave(&msm_dmov_lock, irq_flags); - if (!channel_active) - clk_enable(msm_dmov_clk); - dsb(); - status = readl(DMOV_STATUS(id)); - if (list_empty(&ready_commands[id]) && - (status & DMOV_STATUS_CMD_PTR_RDY)) { -#if 0 - if (list_empty(&active_commands[id])) { - PRINT_FLOW("msm_dmov_enqueue_cmd(%d), enable interrupt\n", id); - writel(DMOV_CONFIG_IRQ_EN, DMOV_CONFIG(id)); - } -#endif - if (cmd->execute_func) - cmd->execute_func(cmd); - PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status); - list_add_tail(&cmd->list, &active_commands[id]); - if (!channel_active) - enable_irq(INT_ADM_AARM); - channel_active |= 1U << id; - writel(cmd->cmdptr, DMOV_CMD_PTR(id)); - } else { - if (!channel_active) - clk_disable(msm_dmov_clk); - if (list_empty(&active_commands[id])) - PRINT_ERROR("msm_dmov_enqueue_cmd(%d), error datamover stalled, status %x\n", id, status); - - PRINT_IO("msm_dmov_enqueue_cmd(%d), enqueue command, status %x\n", id, status); - list_add_tail(&cmd->list, &ready_commands[id]); - } - spin_unlock_irqrestore(&msm_dmov_lock, irq_flags); -} -EXPORT_SYMBOL_GPL(msm_dmov_enqueue_cmd); - -struct msm_dmov_exec_cmdptr_cmd { - struct msm_dmov_cmd dmov_cmd; - struct completion complete; - unsigned id; - unsigned int result; - struct msm_dmov_errdata err; -}; - -static void -dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd, - unsigned int result, - struct msm_dmov_errdata *err) -{ - struct msm_dmov_exec_cmdptr_cmd *cmd = container_of(_cmd, struct msm_dmov_exec_cmdptr_cmd, dmov_cmd); - cmd->result = result; - if (result != 0x80000002 && err) - memcpy(&cmd->err, err, sizeof(struct msm_dmov_errdata)); - - complete(&cmd->complete); -} - -int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) -{ - struct msm_dmov_exec_cmdptr_cmd cmd; - - PRINT_FLOW("dmov_exec_cmdptr(%d, %x)\n", id, cmdptr); - - cmd.dmov_cmd.cmdptr = cmdptr; - cmd.dmov_cmd.complete_func = dmov_exec_cmdptr_complete_func; - cmd.dmov_cmd.execute_func = NULL; - cmd.id = id; - init_completion(&cmd.complete); - - msm_dmov_enqueue_cmd(id, &cmd.dmov_cmd); - wait_for_completion(&cmd.complete); - - if (cmd.result != 0x80000002) { - PRINT_ERROR("dmov_exec_cmdptr(%d): ERROR, result: %x\n", id, cmd.result); - PRINT_ERROR("dmov_exec_cmdptr(%d): flush: %x %x %x %x\n", - id, cmd.err.flush[0], cmd.err.flush[1], cmd.err.flush[2], cmd.err.flush[3]); - return -EIO; - } - PRINT_FLOW("dmov_exec_cmdptr(%d, %x) done\n", id, cmdptr); - return 0; -} - - -static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) -{ - unsigned int int_status, mask, id; - unsigned long irq_flags; - unsigned int ch_status; - unsigned int ch_result; - struct msm_dmov_cmd *cmd; - - spin_lock_irqsave(&msm_dmov_lock, irq_flags); - - int_status = readl(DMOV_ISR); /* read and clear interrupt */ - PRINT_FLOW("msm_datamover_irq_handler: DMOV_ISR %x\n", int_status); - - while (int_status) { - mask = int_status & -int_status; - id = fls(mask) - 1; - PRINT_FLOW("msm_datamover_irq_handler %08x %08x id %d\n", int_status, mask, id); - int_status &= ~mask; - ch_status = readl(DMOV_STATUS(id)); - if (!(ch_status & DMOV_STATUS_RSLT_VALID)) { - PRINT_FLOW("msm_datamover_irq_handler id %d, result not valid %x\n", id, ch_status); - continue; - } - do { - ch_result = readl(DMOV_RSLT(id)); - if (list_empty(&active_commands[id])) { - PRINT_ERROR("msm_datamover_irq_handler id %d, got result " - "with no active command, status %x, result %x\n", - id, ch_status, ch_result); - cmd = NULL; - } else - cmd = list_entry(active_commands[id].next, typeof(*cmd), list); - PRINT_FLOW("msm_datamover_irq_handler id %d, status %x, result %x\n", id, ch_status, ch_result); - if (ch_result & DMOV_RSLT_DONE) { - PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", - id, ch_status); - PRINT_IO("msm_datamover_irq_handler id %d, got result " - "for %p, result %x\n", id, cmd, ch_result); - if (cmd) { - list_del(&cmd->list); - dsb(); - cmd->complete_func(cmd, ch_result, NULL); - } - } - if (ch_result & DMOV_RSLT_FLUSH) { - struct msm_dmov_errdata errdata; - - errdata.flush[0] = readl(DMOV_FLUSH0(id)); - errdata.flush[1] = readl(DMOV_FLUSH1(id)); - errdata.flush[2] = readl(DMOV_FLUSH2(id)); - errdata.flush[3] = readl(DMOV_FLUSH3(id)); - errdata.flush[4] = readl(DMOV_FLUSH4(id)); - errdata.flush[5] = readl(DMOV_FLUSH5(id)); - PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); - PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]); - if (cmd) { - list_del(&cmd->list); - dsb(); - cmd->complete_func(cmd, ch_result, &errdata); - } - } - if (ch_result & DMOV_RSLT_ERROR) { - struct msm_dmov_errdata errdata; - - errdata.flush[0] = readl(DMOV_FLUSH0(id)); - errdata.flush[1] = readl(DMOV_FLUSH1(id)); - errdata.flush[2] = readl(DMOV_FLUSH2(id)); - errdata.flush[3] = readl(DMOV_FLUSH3(id)); - errdata.flush[4] = readl(DMOV_FLUSH4(id)); - errdata.flush[5] = readl(DMOV_FLUSH5(id)); - - PRINT_ERROR("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); - PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]); - if (cmd) { - list_del(&cmd->list); - dsb(); - cmd->complete_func(cmd, ch_result, &errdata); - } - /* this does not seem to work, once we get an error */ - /* the datamover will no longer accept commands */ - writel(0, DMOV_FLUSH0(id)); - } - ch_status = readl(DMOV_STATUS(id)); - PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); - if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) { - cmd = list_entry(ready_commands[id].next, typeof(*cmd), list); - list_move_tail(&cmd->list, &active_commands[id]); - if (cmd->execute_func) - cmd->execute_func(cmd); - PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id); - writel(cmd->cmdptr, DMOV_CMD_PTR(id)); - } - } while (ch_status & DMOV_STATUS_RSLT_VALID); - if (list_empty(&active_commands[id]) && list_empty(&ready_commands[id])) - channel_active &= ~(1U << id); - PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); - } - - if (!channel_active) { - disable_irq_nosync(INT_ADM_AARM); - clk_disable(msm_dmov_clk); - } - - spin_unlock_irqrestore(&msm_dmov_lock, irq_flags); - return IRQ_HANDLED; -} - -static int __init msm_init_datamover(void) -{ - int i; - int ret; - struct clk *clk; - - for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) { - INIT_LIST_HEAD(&ready_commands[i]); - INIT_LIST_HEAD(&active_commands[i]); - writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i)); - } - clk = clk_get(NULL, "adm_clk"); - if (IS_ERR(clk)) - return PTR_ERR(clk); - clk_prepare(clk); - msm_dmov_clk = clk; - ret = request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL); - if (ret) - return ret; - disable_irq(INT_ADM_AARM); - return 0; -} -module_init(msm_init_datamover); diff --git a/arch/arm/mach-msm/gpiomux-8x50.c b/arch/arm/mach-msm/gpiomux-8x50.c deleted file mode 100644 index f7a4ea593c95..000000000000 --- a/arch/arm/mach-msm/gpiomux-8x50.c +++ /dev/null @@ -1,51 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#include "gpiomux.h" - -#if defined(CONFIG_MMC_MSM) || defined(CONFIG_MMC_MSM_MODULE) - #define SDCC_DAT_0_3_CMD_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_UP\ - | GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA) - #define SDCC_CLK_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_NONE\ - | GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA) -#else - #define SDCC_DAT_0_3_CMD_ACTV_CFG 0 - #define SDCC_CLK_ACTV_CFG 0 -#endif - -#define SDC1_SUSPEND_CONFIG (GPIOMUX_VALID | GPIOMUX_PULL_DOWN\ - | GPIOMUX_FUNC_GPIO | GPIOMUX_DRV_2MA) - -struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { - [86] = { /* UART3 RX */ - .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | - GPIOMUX_FUNC_1 | GPIOMUX_VALID, - }, - [87] = { /* UART3 TX */ - .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN | - GPIOMUX_FUNC_1 | GPIOMUX_VALID, - }, - /* SDC1 data[3:0] & CMD */ - [51 ... 55] = { - .active = SDCC_DAT_0_3_CMD_ACTV_CFG, - .suspended = SDC1_SUSPEND_CONFIG - }, - /* SDC1 CLK */ - [56] = { - .active = SDCC_CLK_ACTV_CFG, - .suspended = SDC1_SUSPEND_CONFIG - }, -}; diff --git a/arch/arm/mach-msm/gpiomux-v1.h b/arch/arm/mach-msm/gpiomux-v1.h deleted file mode 100644 index 71d86feba450..000000000000 --- a/arch/arm/mach-msm/gpiomux-v1.h +++ /dev/null @@ -1,67 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H -#define __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H - -#if defined(CONFIG_ARCH_MSM7X30) -#define GPIOMUX_NGPIOS 182 -#elif defined(CONFIG_ARCH_QSD8X50) -#define GPIOMUX_NGPIOS 165 -#else -#define GPIOMUX_NGPIOS 133 -#endif - -typedef u32 gpiomux_config_t; - -enum { - GPIOMUX_DRV_2MA = 0UL << 17, - GPIOMUX_DRV_4MA = 1UL << 17, - GPIOMUX_DRV_6MA = 2UL << 17, - GPIOMUX_DRV_8MA = 3UL << 17, - GPIOMUX_DRV_10MA = 4UL << 17, - GPIOMUX_DRV_12MA = 5UL << 17, - GPIOMUX_DRV_14MA = 6UL << 17, - GPIOMUX_DRV_16MA = 7UL << 17, -}; - -enum { - GPIOMUX_FUNC_GPIO = 0UL, - GPIOMUX_FUNC_1 = 1UL, - GPIOMUX_FUNC_2 = 2UL, - GPIOMUX_FUNC_3 = 3UL, - GPIOMUX_FUNC_4 = 4UL, - GPIOMUX_FUNC_5 = 5UL, - GPIOMUX_FUNC_6 = 6UL, - GPIOMUX_FUNC_7 = 7UL, - GPIOMUX_FUNC_8 = 8UL, - GPIOMUX_FUNC_9 = 9UL, - GPIOMUX_FUNC_A = 10UL, - GPIOMUX_FUNC_B = 11UL, - GPIOMUX_FUNC_C = 12UL, - GPIOMUX_FUNC_D = 13UL, - GPIOMUX_FUNC_E = 14UL, - GPIOMUX_FUNC_F = 15UL, -}; - -enum { - GPIOMUX_PULL_NONE = 0UL << 15, - GPIOMUX_PULL_DOWN = 1UL << 15, - GPIOMUX_PULL_KEEPER = 2UL << 15, - GPIOMUX_PULL_UP = 3UL << 15, -}; - -#endif diff --git a/arch/arm/mach-msm/gpiomux.c b/arch/arm/mach-msm/gpiomux.c deleted file mode 100644 index 2b8e2d217082..000000000000 --- a/arch/arm/mach-msm/gpiomux.c +++ /dev/null @@ -1,111 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#include <linux/module.h> -#include <linux/spinlock.h> -#include "gpiomux.h" -#include "proc_comm.h" - -static DEFINE_SPINLOCK(gpiomux_lock); - -static void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val) -{ - unsigned tlmm_config = (val & ~GPIOMUX_CTL_MASK) | - ((gpio & 0x3ff) << 4); - unsigned tlmm_disable = 0; - int rc; - - rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, - &tlmm_config, &tlmm_disable); - if (rc) - pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n", - __func__, rc, tlmm_config, tlmm_disable); -} - -int msm_gpiomux_write(unsigned gpio, - gpiomux_config_t active, - gpiomux_config_t suspended) -{ - struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio; - unsigned long irq_flags; - gpiomux_config_t setting; - - if (gpio >= GPIOMUX_NGPIOS) - return -EINVAL; - - spin_lock_irqsave(&gpiomux_lock, irq_flags); - - if (active & GPIOMUX_VALID) - cfg->active = active; - - if (suspended & GPIOMUX_VALID) - cfg->suspended = suspended; - - setting = cfg->ref ? active : suspended; - if (setting & GPIOMUX_VALID) - __msm_gpiomux_write(gpio, setting); - - spin_unlock_irqrestore(&gpiomux_lock, irq_flags); - return 0; -} -EXPORT_SYMBOL(msm_gpiomux_write); - -int msm_gpiomux_get(unsigned gpio) -{ - struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio; - unsigned long irq_flags; - - if (gpio >= GPIOMUX_NGPIOS) - return -EINVAL; - - spin_lock_irqsave(&gpiomux_lock, irq_flags); - if (cfg->ref++ == 0 && cfg->active & GPIOMUX_VALID) - __msm_gpiomux_write(gpio, cfg->active); - spin_unlock_irqrestore(&gpiomux_lock, irq_flags); - return 0; -} -EXPORT_SYMBOL(msm_gpiomux_get); - -int msm_gpiomux_put(unsigned gpio) -{ - struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio; - unsigned long irq_flags; - - if (gpio >= GPIOMUX_NGPIOS) - return -EINVAL; - - spin_lock_irqsave(&gpiomux_lock, irq_flags); - BUG_ON(cfg->ref == 0); - if (--cfg->ref == 0 && cfg->suspended & GPIOMUX_VALID) - __msm_gpiomux_write(gpio, cfg->suspended); - spin_unlock_irqrestore(&gpiomux_lock, irq_flags); - return 0; -} -EXPORT_SYMBOL(msm_gpiomux_put); - -static int __init gpiomux_init(void) -{ - unsigned n; - - for (n = 0; n < GPIOMUX_NGPIOS; ++n) { - msm_gpiomux_configs[n].ref = 0; - if (!(msm_gpiomux_configs[n].suspended & GPIOMUX_VALID)) - continue; - __msm_gpiomux_write(n, msm_gpiomux_configs[n].suspended); - } - return 0; -} -postcore_initcall(gpiomux_init); diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h deleted file mode 100644 index 4410d7766f93..000000000000 --- a/arch/arm/mach-msm/gpiomux.h +++ /dev/null @@ -1,84 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_H -#define __ARCH_ARM_MACH_MSM_GPIOMUX_H - -#include <linux/bitops.h> -#include <linux/errno.h> -#include <mach/msm_gpiomux.h> -#include "gpiomux-v1.h" - -/** - * struct msm_gpiomux_config: gpiomux settings for one gpio line. - * - * A complete gpiomux config is the bitwise-or of a drive-strength, - * function, and pull. For functions other than GPIO, the OE - * is hard-wired according to the function. For GPIO mode, - * OE is controlled by gpiolib. - * - * Available settings differ by target; see the gpiomux header - * specific to your target arch for available configurations. - * - * @active: The configuration to be installed when the line is - * active, or its reference count is > 0. - * @suspended: The configuration to be installed when the line - * is suspended, or its reference count is 0. - * @ref: The reference count of the line. For internal use of - * the gpiomux framework only. - */ -struct msm_gpiomux_config { - gpiomux_config_t active; - gpiomux_config_t suspended; - unsigned ref; -}; - -/** - * @GPIOMUX_VALID: If set, the config field contains 'good data'. - * The absence of this bit will prevent the gpiomux - * system from applying the configuration under all - * circumstances. - */ -enum { - GPIOMUX_VALID = BIT(sizeof(gpiomux_config_t) * BITS_PER_BYTE - 1), - GPIOMUX_CTL_MASK = GPIOMUX_VALID, -}; - -#ifdef CONFIG_MSM_GPIOMUX - -/* Each architecture must provide its own instance of this table. - * To avoid having gpiomux manage any given gpio, one or both of - * the entries can avoid setting GPIOMUX_VALID - the absence - * of that flag will prevent the configuration from being applied - * during state transitions. - */ -extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS]; - -/* Install a new configuration to the gpio line. To avoid overwriting - * a configuration, leave the VALID bit out. - */ -int msm_gpiomux_write(unsigned gpio, - gpiomux_config_t active, - gpiomux_config_t suspended); -#else -static inline int msm_gpiomux_write(unsigned gpio, - gpiomux_config_t active, - gpiomux_config_t suspended) -{ - return -ENOSYS; -} -#endif -#endif diff --git a/arch/arm/mach-msm/include/mach/clk.h b/arch/arm/mach-msm/include/mach/clk.h deleted file mode 100644 index fd4f4a7a83b3..000000000000 --- a/arch/arm/mach-msm/include/mach/clk.h +++ /dev/null @@ -1,31 +0,0 @@ -/* Copyright (c) 2009, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __MACH_CLK_H -#define __MACH_CLK_H - -/* Magic rate value for use with PM QOS to request the board's maximum - * supported AXI rate. PM QOS will only pass positive s32 rate values - * through to the clock driver, so INT_MAX is used. - */ -#define MSM_AXI_MAX_FREQ LONG_MAX - -enum clk_reset_action { - CLK_RESET_DEASSERT = 0, - CLK_RESET_ASSERT = 1 -}; - -struct clk; - -/* Assert/Deassert reset to a hardware block associated with a clock */ -int clk_reset(struct clk *clk, enum clk_reset_action action); - -#endif diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h deleted file mode 100644 index a72d48d42342..000000000000 --- a/arch/arm/mach-msm/include/mach/dma.h +++ /dev/null @@ -1,151 +0,0 @@ -/* linux/include/asm-arm/arch-msm/dma.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_DMA_H - -#include <linux/list.h> - -struct msm_dmov_errdata { - uint32_t flush[6]; -}; - -struct msm_dmov_cmd { - struct list_head list; - unsigned int cmdptr; - void (*complete_func)(struct msm_dmov_cmd *cmd, - unsigned int result, - struct msm_dmov_errdata *err); - void (*execute_func)(struct msm_dmov_cmd *cmd); - void *data; -}; - -#ifndef CONFIG_ARCH_MSM8X60 -void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd); -void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful); -int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr); -#else -static inline -void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) { } -static inline -void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful) { } -static inline -int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) { return -EIO; } -#endif - -#define DMOV_CMD_LIST (0 << 29) /* does not work */ -#define DMOV_CMD_PTR_LIST (1 << 29) /* works */ -#define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */ -#define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */ -#define DMOV_CMD_ADDR(addr) ((addr) >> 3) - -#define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */ -#define DMOV_RSLT_ERROR (1 << 3) -#define DMOV_RSLT_FLUSH (1 << 2) -#define DMOV_RSLT_DONE (1 << 1) /* top pointer done */ -#define DMOV_RSLT_USER (1 << 0) /* command with FR force result */ - -#define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29)) -#define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3) -#define DMOV_STATUS_RSLT_VALID (1 << 1) -#define DMOV_STATUS_CMD_PTR_RDY (1 << 0) - -#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2) -#define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1) -#define DMOV_CONFIG_IRQ_EN (1 << 0) - -/* channel assignments */ - -#define DMOV_NAND_CHAN 7 -#define DMOV_NAND_CRCI_CMD 5 -#define DMOV_NAND_CRCI_DATA 4 - -#define DMOV_SDC1_CHAN 8 -#define DMOV_SDC1_CRCI 6 - -#define DMOV_SDC2_CHAN 8 -#define DMOV_SDC2_CRCI 7 - -#define DMOV_TSIF_CHAN 10 -#define DMOV_TSIF_CRCI 10 - -#define DMOV_USB_CHAN 11 - -/* no client rate control ifc (eg, ram) */ -#define DMOV_NONE_CRCI 0 - - -/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover - * is going to walk a list of 32bit pointers as described below. Each - * pointer points to a *array* of dmov_s, etc structs. The last pointer - * in the list is marked with CMD_PTR_LP. The last struct in each array - * is marked with CMD_LC (see below). - */ -#define CMD_PTR_ADDR(addr) ((addr) >> 3) -#define CMD_PTR_LP (1 << 31) /* last pointer */ -#define CMD_PTR_PT (3 << 29) /* ? */ - -/* Single Item Mode */ -typedef struct { - unsigned cmd; - unsigned src; - unsigned dst; - unsigned len; -} dmov_s; - -/* Scatter/Gather Mode */ -typedef struct { - unsigned cmd; - unsigned src_dscr; - unsigned dst_dscr; - unsigned _reserved; -} dmov_sg; - -/* Box mode */ -typedef struct { - uint32_t cmd; - uint32_t src_row_addr; - uint32_t dst_row_addr; - uint32_t src_dst_len; - uint32_t num_rows; - uint32_t row_offset; -} dmov_box; - -/* bits for the cmd field of the above structures */ - -#define CMD_LC (1 << 31) /* last command */ -#define CMD_FR (1 << 22) /* force result -- does not work? */ -#define CMD_OCU (1 << 21) /* other channel unblock */ -#define CMD_OCB (1 << 20) /* other channel block */ -#define CMD_TCB (1 << 19) /* ? */ -#define CMD_DAH (1 << 18) /* destination address hold -- does not work?*/ -#define CMD_SAH (1 << 17) /* source address hold -- does not work? */ - -#define CMD_MODE_SINGLE (0 << 0) /* dmov_s structure used */ -#define CMD_MODE_SG (1 << 0) /* untested */ -#define CMD_MODE_IND_SG (2 << 0) /* untested */ -#define CMD_MODE_BOX (3 << 0) /* untested */ - -#define CMD_DST_SWAP_BYTES (1 << 14) /* exchange each byte n with byte n+1 */ -#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */ -#define CMD_DST_SWAP_WORDS (1 << 16) /* exchange each word n with word n+1 */ - -#define CMD_SRC_SWAP_BYTES (1 << 11) /* exchange each byte n with byte n+1 */ -#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */ -#define CMD_SRC_SWAP_WORDS (1 << 13) /* exchange each word n with word n+1 */ - -#define CMD_DST_CRCI(n) (((n) & 15) << 7) -#define CMD_SRC_CRCI(n) (((n) & 15) << 3) - -#endif diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S deleted file mode 100644 index f2ae9087f654..000000000000 --- a/arch/arm/mach-msm/include/mach/entry-macro.S +++ /dev/null @@ -1,36 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - */ - -#if !defined(CONFIG_ARM_GIC) -#include <mach/msm_iomap.h> - - .macro get_irqnr_preamble, base, tmp - @ enable imprecise aborts - cpsie a - mov \base, #MSM_VIC_BASE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - @ 0xD0 has irq# or old irq# if the irq has been handled - @ 0xD4 has irq# or -1 if none pending *but* if you just - @ read 0xD4 you never get the first irq for some reason - ldr \irqnr, [\base, #0xD0] - ldr \irqnr, [\base, #0xD4] - cmp \irqnr, #0xffffffff - .endm -#endif diff --git a/arch/arm/mach-msm/include/mach/hardware.h b/arch/arm/mach-msm/include/mach/hardware.h deleted file mode 100644 index 2d126091ae41..000000000000 --- a/arch/arm/mach-msm/include/mach/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-msm/include/mach/hardware.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_HARDWARE_H - -#endif diff --git a/arch/arm/mach-msm/include/mach/irqs-7x00.h b/arch/arm/mach-msm/include/mach/irqs-7x00.h deleted file mode 100644 index f1fe70612fe9..000000000000 --- a/arch/arm/mach-msm/include/mach/irqs-7x00.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - */ - -#ifndef __ASM_ARCH_MSM_IRQS_7X00_H -#define __ASM_ARCH_MSM_IRQS_7X00_H - -/* MSM ARM11 Interrupt Numbers */ -/* See 80-VE113-1 A, pp219-221 */ - -#define INT_A9_M2A_0 0 -#define INT_A9_M2A_1 1 -#define INT_A9_M2A_2 2 -#define INT_A9_M2A_3 3 -#define INT_A9_M2A_4 4 -#define INT_A9_M2A_5 5 -#define INT_A9_M2A_6 6 -#define INT_GP_TIMER_EXP 7 -#define INT_DEBUG_TIMER_EXP 8 -#define INT_UART1 9 -#define INT_UART2 10 -#define INT_UART3 11 -#define INT_UART1_RX 12 -#define INT_UART2_RX 13 -#define INT_UART3_RX 14 -#define INT_USB_OTG 15 -#define INT_MDDI_PRI 16 -#define INT_MDDI_EXT 17 -#define INT_MDDI_CLIENT 18 -#define INT_MDP 19 -#define INT_GRAPHICS 20 -#define INT_ADM_AARM 21 -#define INT_ADSP_A11 22 -#define INT_ADSP_A9_A11 23 -#define INT_SDC1_0 24 -#define INT_SDC1_1 25 -#define INT_SDC2_0 26 -#define INT_SDC2_1 27 -#define INT_KEYSENSE 28 -#define INT_TCHSCRN_SSBI 29 -#define INT_TCHSCRN1 30 -#define INT_TCHSCRN2 31 - -#define INT_GPIO_GROUP1 (32 + 0) -#define INT_GPIO_GROUP2 (32 + 1) -#define INT_PWB_I2C (32 + 2) -#define INT_SOFTRESET (32 + 3) -#define INT_NAND_WR_ER_DONE (32 + 4) -#define INT_NAND_OP_DONE (32 + 5) -#define INT_PBUS_ARM11 (32 + 6) -#define INT_AXI_MPU_SMI (32 + 7) -#define INT_AXI_MPU_EBI1 (32 + 8) -#define INT_AD_HSSD (32 + 9) -#define INT_ARM11_PMU (32 + 10) -#define INT_ARM11_DMA (32 + 11) -#define INT_TSIF_IRQ (32 + 12) -#define INT_UART1DM_IRQ (32 + 13) -#define INT_UART1DM_RX (32 + 14) -#define INT_USB_HS (32 + 15) -#define INT_SDC3_0 (32 + 16) -#define INT_SDC3_1 (32 + 17) -#define INT_SDC4_0 (32 + 18) -#define INT_SDC4_1 (32 + 19) -#define INT_UART2DM_RX (32 + 20) -#define INT_UART2DM_IRQ (32 + 21) - -/* 22-31 are reserved */ - -#define NR_MSM_IRQS 64 -#define NR_GPIO_IRQS 122 -#define NR_BOARD_IRQS 64 - -#endif diff --git a/arch/arm/mach-msm/include/mach/irqs-7x30.h b/arch/arm/mach-msm/include/mach/irqs-7x30.h deleted file mode 100644 index 1f15902655fd..000000000000 --- a/arch/arm/mach-msm/include/mach/irqs-7x30.h +++ /dev/null @@ -1,153 +0,0 @@ -/* Copyright (c) 2009, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MSM_IRQS_7X30_H -#define __ASM_ARCH_MSM_IRQS_7X30_H - -/* MSM ACPU Interrupt Numbers */ - -#define INT_DEBUG_TIMER_EXP 0 -#define INT_GPT0_TIMER_EXP 1 -#define INT_GPT1_TIMER_EXP 2 -#define INT_WDT0_ACCSCSSBARK 3 -#define INT_WDT1_ACCSCSSBARK 4 -#define INT_AVS_SVIC 5 -#define INT_AVS_SVIC_SW_DONE 6 -#define INT_SC_DBG_RX_FULL 7 -#define INT_SC_DBG_TX_EMPTY 8 -#define INT_ARM11_PM 9 -#define INT_AVS_REQ_DOWN 10 -#define INT_AVS_REQ_UP 11 -#define INT_SC_ACG 12 -/* SCSS_VICFIQSTS0[13:15] are RESERVED */ -#define INT_L2_SVICCPUIRPTREQ 16 -#define INT_L2_SVICDMANSIRPTREQ 17 -#define INT_L2_SVICDMASIRPTREQ 18 -#define INT_L2_SVICSLVIRPTREQ 19 -#define INT_AD5A_MPROC_APPS_0 20 -#define INT_AD5A_MPROC_APPS_1 21 -#define INT_A9_M2A_0 22 -#define INT_A9_M2A_1 23 -#define INT_A9_M2A_2 24 -#define INT_A9_M2A_3 25 -#define INT_A9_M2A_4 26 -#define INT_A9_M2A_5 27 -#define INT_A9_M2A_6 28 -#define INT_A9_M2A_7 29 -#define INT_A9_M2A_8 30 -#define INT_A9_M2A_9 31 - -#define INT_AXI_EBI1_SC (32 + 0) -#define INT_IMEM_ERR (32 + 1) -#define INT_AXI_EBI0_SC (32 + 2) -#define INT_PBUS_SC_IRQC (32 + 3) -#define INT_PERPH_BUS_BPM (32 + 4) -#define INT_CC_TEMP_SENSE (32 + 5) -#define INT_UXMC_EBI0 (32 + 6) -#define INT_UXMC_EBI1 (32 + 7) -#define INT_EBI2_OP_DONE (32 + 8) -#define INT_EBI2_WR_ER_DONE (32 + 9) -#define INT_TCSR_SPSS_CE (32 + 10) -#define INT_EMDH (32 + 11) -#define INT_PMDH (32 + 12) -#define INT_MDC (32 + 13) -#define INT_MIDI_TO_SUPSS (32 + 14) -#define INT_LPA_2 (32 + 15) -#define INT_GPIO_GROUP1_SECURE (32 + 16) -#define INT_GPIO_GROUP2_SECURE (32 + 17) -#define INT_GPIO_GROUP1 (32 + 18) -#define INT_GPIO_GROUP2 (32 + 19) -#define INT_MPRPH_SOFTRESET (32 + 20) -#define INT_PWB_I2C (32 + 21) -#define INT_PWB_I2C_2 (32 + 22) -#define INT_TSSC_SAMPLE (32 + 23) -#define INT_TSSC_PENUP (32 + 24) -#define INT_TCHSCRN_SSBI (32 + 25) -#define INT_FM_RDS (32 + 26) -#define INT_KEYSENSE (32 + 27) -#define INT_USB_OTG_HS (32 + 28) -#define INT_USB_OTG_HS2 (32 + 29) -#define INT_USB_OTG_HS3 (32 + 30) -#define INT_CSI (32 + 31) - -#define INT_SPI_OUTPUT (64 + 0) -#define INT_SPI_INPUT (64 + 1) -#define INT_SPI_ERROR (64 + 2) -#define INT_UART1 (64 + 3) -#define INT_UART1_RX (64 + 4) -#define INT_UART2 (64 + 5) -#define INT_UART2_RX (64 + 6) -#define INT_UART3 (64 + 7) -#define INT_UART3_RX (64 + 8) -#define INT_UART1DM_IRQ (64 + 9) -#define INT_UART1DM_RX (64 + 10) -#define INT_UART2DM_IRQ (64 + 11) -#define INT_UART2DM_RX (64 + 12) -#define INT_TSIF (64 + 13) -#define INT_ADM_SC1 (64 + 14) -#define INT_ADM_SC2 (64 + 15) -#define INT_MDP (64 + 16) -#define INT_VPE (64 + 17) -#define INT_GRP_2D (64 + 18) -#define INT_GRP_3D (64 + 19) -#define INT_ROTATOR (64 + 20) -#define INT_MFC720 (64 + 21) -#define INT_JPEG (64 + 22) -#define INT_VFE (64 + 23) -#define INT_TV_ENC (64 + 24) -#define INT_PMIC_SSBI (64 + 25) -#define INT_MPM_1 (64 + 26) -#define INT_TCSR_SPSS_SAMPLE (64 + 27) -#define INT_TCSR_SPSS_PENUP (64 + 28) -#define INT_MPM_2 (64 + 29) -#define INT_SDC1_0 (64 + 30) -#define INT_SDC1_1 (64 + 31) - -#define INT_SDC3_0 (96 + 0) -#define INT_SDC3_1 (96 + 1) -#define INT_SDC2_0 (96 + 2) -#define INT_SDC2_1 (96 + 3) -#define INT_SDC4_0 (96 + 4) -#define INT_SDC4_1 (96 + 5) -#define INT_PWB_QUP_IN (96 + 6) -#define INT_PWB_QUP_OUT (96 + 7) -#define INT_PWB_QUP_ERR (96 + 8) -#define INT_SCSS_WDT0_BITE (96 + 9) -/* SCSS_VICFIQSTS3[10:31] are RESERVED */ - -/* Retrofit universal macro names */ -#define INT_ADM_AARM INT_ADM_SC2 -#define INT_USB_HS INT_USB_OTG_HS -#define INT_USB_OTG INT_USB_OTG_HS -#define INT_TCHSCRN1 INT_TSSC_SAMPLE -#define INT_TCHSCRN2 INT_TSSC_PENUP -#define INT_GP_TIMER_EXP INT_GPT0_TIMER_EXP -#define INT_ADSP_A11 INT_AD5A_MPROC_APPS_0 -#define INT_ADSP_A9_A11 INT_AD5A_MPROC_APPS_1 -#define INT_MDDI_EXT INT_EMDH -#define INT_MDDI_PRI INT_PMDH -#define INT_MDDI_CLIENT INT_MDC -#define INT_NAND_WR_ER_DONE INT_EBI2_WR_ER_DONE -#define INT_NAND_OP_DONE INT_EBI2_OP_DONE - -#define NR_MSM_IRQS 128 -#define NR_GPIO_IRQS 182 -#define PMIC8058_IRQ_BASE (NR_MSM_IRQS + NR_GPIO_IRQS) -#define NR_PMIC8058_GPIO_IRQS 40 -#define NR_PMIC8058_MPP_IRQS 12 -#define NR_PMIC8058_MISC_IRQS 8 -#define NR_PMIC8058_IRQS (NR_PMIC8058_GPIO_IRQS +\ - NR_PMIC8058_MPP_IRQS +\ - NR_PMIC8058_MISC_IRQS) -#define NR_BOARD_IRQS NR_PMIC8058_IRQS - -#endif /* __ASM_ARCH_MSM_IRQS_7X30_H */ diff --git a/arch/arm/mach-msm/include/mach/irqs-8x50.h b/arch/arm/mach-msm/include/mach/irqs-8x50.h deleted file mode 100644 index 26adbe0e9406..000000000000 --- a/arch/arm/mach-msm/include/mach/irqs-8x50.h +++ /dev/null @@ -1,88 +0,0 @@ -/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MSM_IRQS_8XXX_H -#define __ASM_ARCH_MSM_IRQS_8XXX_H - -/* MSM ACPU Interrupt Numbers */ - -#define INT_A9_M2A_0 0 -#define INT_A9_M2A_1 1 -#define INT_A9_M2A_2 2 -#define INT_A9_M2A_3 3 -#define INT_A9_M2A_4 4 -#define INT_A9_M2A_5 5 -#define INT_A9_M2A_6 6 -#define INT_GP_TIMER_EXP 7 -#define INT_DEBUG_TIMER_EXP 8 -#define INT_SIRC_0 9 -#define INT_SDC3_0 10 -#define INT_SDC3_1 11 -#define INT_SDC4_0 12 -#define INT_SDC4_1 13 -#define INT_AD6_EXT_VFR 14 -#define INT_USB_OTG 15 -#define INT_MDDI_PRI 16 -#define INT_MDDI_EXT 17 -#define INT_MDDI_CLIENT 18 -#define INT_MDP 19 -#define INT_GRAPHICS 20 -#define INT_ADM_AARM 21 -#define INT_ADSP_A11 22 -#define INT_ADSP_A9_A11 23 -#define INT_SDC1_0 24 -#define INT_SDC1_1 25 -#define INT_SDC2_0 26 -#define INT_SDC2_1 27 -#define INT_KEYSENSE 28 -#define INT_TCHSCRN_SSBI 29 -#define INT_TCHSCRN1 30 -#define INT_TCHSCRN2 31 - -#define INT_TCSR_MPRPH_SC1 (32 + 0) -#define INT_USB_FS2 (32 + 1) -#define INT_PWB_I2C (32 + 2) -#define INT_SOFTRESET (32 + 3) -#define INT_NAND_WR_ER_DONE (32 + 4) -#define INT_NAND_OP_DONE (32 + 5) -#define INT_TCSR_MPRPH_SC2 (32 + 6) -#define INT_OP_PEN (32 + 7) -#define INT_AD_HSSD (32 + 8) -#define INT_ARM11_PM (32 + 9) -#define INT_SDMA_NON_SECURE (32 + 10) -#define INT_TSIF_IRQ (32 + 11) -#define INT_UART1DM_IRQ (32 + 12) -#define INT_UART1DM_RX (32 + 13) -#define INT_SDMA_SECURE (32 + 14) -#define INT_SI2S_SLAVE (32 + 15) -#define INT_SC_I2CPU (32 + 16) -#define INT_SC_DBG_RDTRFULL (32 + 17) -#define INT_SC_DBG_WDTRFULL (32 + 18) -#define INT_SCPLL_CTL_DONE (32 + 19) -#define INT_UART2DM_IRQ (32 + 20) -#define INT_UART2DM_RX (32 + 21) -#define INT_VDC_MEC (32 + 22) -#define INT_VDC_DB (32 + 23) -#define INT_VDC_AXI (32 + 24) -#define INT_VFE (32 + 25) -#define INT_USB_HS (32 + 26) -#define INT_AUDIO_OUT0 (32 + 27) -#define INT_AUDIO_OUT1 (32 + 28) -#define INT_CRYPTO (32 + 29) -#define INT_AD6M_IDLE (32 + 30) -#define INT_SIRC_1 (32 + 31) - -#define NR_GPIO_IRQS 165 -#define NR_MSM_IRQS 64 -#define NR_BOARD_IRQS 64 - -#endif diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h deleted file mode 100644 index 164d355c96ea..000000000000 --- a/arch/arm/mach-msm/include/mach/irqs.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_IRQS_H -#define __ASM_ARCH_MSM_IRQS_H - -#define MSM_IRQ_BIT(irq) (1 << ((irq) & 31)) - -#if defined(CONFIG_ARCH_MSM7X30) -#include "irqs-7x30.h" -#elif defined(CONFIG_ARCH_QSD8X50) -#include "irqs-8x50.h" -#include "sirc.h" -#elif defined(CONFIG_ARCH_MSM_ARM11) -#include "irqs-7x00.h" -#else -#error "Unknown architecture specification" -#endif - -#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS) -#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n)) -#define MSM_INT_TO_REG(base, irq) (base + irq / 32) - -#endif diff --git a/arch/arm/mach-msm/include/mach/msm_gpiomux.h b/arch/arm/mach-msm/include/mach/msm_gpiomux.h deleted file mode 100644 index 0c7d3936e02f..000000000000 --- a/arch/arm/mach-msm/include/mach/msm_gpiomux.h +++ /dev/null @@ -1,38 +0,0 @@ -/* Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _LINUX_MSM_GPIOMUX_H -#define _LINUX_MSM_GPIOMUX_H - -#ifdef CONFIG_MSM_GPIOMUX - -/* Increment a gpio's reference count, possibly activating the line. */ -int __must_check msm_gpiomux_get(unsigned gpio); - -/* Decrement a gpio's reference count, possibly suspending the line. */ -int msm_gpiomux_put(unsigned gpio); - -#else - -static inline int __must_check msm_gpiomux_get(unsigned gpio) -{ - return -ENOSYS; -} - -static inline int msm_gpiomux_put(unsigned gpio) -{ - return -ENOSYS; -} - -#endif - -#endif /* _LINUX_MSM_GPIOMUX_H */ diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h deleted file mode 100644 index 67dc0e98b958..000000000000 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h +++ /dev/null @@ -1,108 +0,0 @@ -/* arch/arm/mach-msm/include/mach/msm_iomap.h - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - * The MSM peripherals are spread all over across 768MB of physical - * space, which makes just having a simple IO_ADDRESS macro to slide - * them into the right virtual location rough. Instead, we will - * provide a master phys->virt mapping for peripherals here. - * - */ - -#ifndef __ASM_ARCH_MSM_IOMAP_7X00_H -#define __ASM_ARCH_MSM_IOMAP_7X00_H - -#include <asm/sizes.h> - -/* Physical base address and size of peripherals. - * Ordered by the virtual base addresses they will be mapped at. - * - * MSM_VIC_BASE must be an value that can be loaded via a "mov" - * instruction, otherwise entry-macro.S will not compile. - * - * If you add or remove entries here, you'll want to edit the - * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your - * changes. - * - */ - -#define MSM_VIC_BASE IOMEM(0xE0000000) -#define MSM_VIC_PHYS 0xC0000000 -#define MSM_VIC_SIZE SZ_4K - -#define MSM7X00_CSR_PHYS 0xC0100000 -#define MSM7X00_CSR_SIZE SZ_4K - -#define MSM_DMOV_BASE IOMEM(0xE0002000) -#define MSM_DMOV_PHYS 0xA9700000 -#define MSM_DMOV_SIZE SZ_4K - -#define MSM7X00_GPIO1_PHYS 0xA9200000 -#define MSM7X00_GPIO1_SIZE SZ_4K - -#define MSM7X00_GPIO2_PHYS 0xA9300000 -#define MSM7X00_GPIO2_SIZE SZ_4K - -#define MSM_CLK_CTL_BASE IOMEM(0xE0005000) -#define MSM_CLK_CTL_PHYS 0xA8600000 -#define MSM_CLK_CTL_SIZE SZ_4K - -#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000) -#define MSM_SHARED_RAM_PHYS 0x01F00000 -#define MSM_SHARED_RAM_SIZE SZ_1M - -#define MSM_UART1_PHYS 0xA9A00000 -#define MSM_UART1_SIZE SZ_4K - -#define MSM_UART2_PHYS 0xA9B00000 -#define MSM_UART2_SIZE SZ_4K - -#define MSM_UART3_PHYS 0xA9C00000 -#define MSM_UART3_SIZE SZ_4K - -#define MSM_SDC1_PHYS 0xA0400000 -#define MSM_SDC1_SIZE SZ_4K - -#define MSM_SDC2_PHYS 0xA0500000 -#define MSM_SDC2_SIZE SZ_4K - -#define MSM_SDC3_PHYS 0xA0600000 -#define MSM_SDC3_SIZE SZ_4K - -#define MSM_SDC4_PHYS 0xA0700000 -#define MSM_SDC4_SIZE SZ_4K - -#define MSM_I2C_PHYS 0xA9900000 -#define MSM_I2C_SIZE SZ_4K - -#define MSM_HSUSB_PHYS 0xA0800000 -#define MSM_HSUSB_SIZE SZ_4K - -#define MSM_PMDH_PHYS 0xAA600000 -#define MSM_PMDH_SIZE SZ_4K - -#define MSM_EMDH_PHYS 0xAA700000 -#define MSM_EMDH_SIZE SZ_4K - -#define MSM_MDP_PHYS 0xAA200000 -#define MSM_MDP_SIZE 0x000F0000 - -#define MSM_MDC_PHYS 0xAA500000 -#define MSM_MDC_SIZE SZ_1M - -#define MSM_AD5_PHYS 0xAC000000 -#define MSM_AD5_SIZE (SZ_1M*13) - -#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h deleted file mode 100644 index 198202c267c8..000000000000 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2011 Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - * The MSM peripherals are spread all over across 768MB of physical - * space, which makes just having a simple IO_ADDRESS macro to slide - * them into the right virtual location rough. Instead, we will - * provide a master phys->virt mapping for peripherals here. - * - */ - -#ifndef __ASM_ARCH_MSM_IOMAP_7X30_H -#define __ASM_ARCH_MSM_IOMAP_7X30_H - -/* Physical base address and size of peripherals. - * Ordered by the virtual base addresses they will be mapped at. - * - * MSM_VIC_BASE must be an value that can be loaded via a "mov" - * instruction, otherwise entry-macro.S will not compile. - * - * If you add or remove entries here, you'll want to edit the - * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your - * changes. - * - */ - -#define MSM_VIC_BASE IOMEM(0xE0000000) -#define MSM_VIC_PHYS 0xC0080000 -#define MSM_VIC_SIZE SZ_4K - -#define MSM7X30_CSR_PHYS 0xC0100000 -#define MSM7X30_CSR_SIZE SZ_4K - -#define MSM_DMOV_BASE IOMEM(0xE0002000) -#define MSM_DMOV_PHYS 0xAC400000 -#define MSM_DMOV_SIZE SZ_4K - -#define MSM7X30_GPIO1_PHYS 0xAC001000 -#define MSM7X30_GPIO1_SIZE SZ_4K - -#define MSM7X30_GPIO2_PHYS 0xAC101000 -#define MSM7X30_GPIO2_SIZE SZ_4K - -#define MSM_CLK_CTL_BASE IOMEM(0xE0005000) -#define MSM_CLK_CTL_PHYS 0xAB800000 -#define MSM_CLK_CTL_SIZE SZ_4K - -#define MSM_CLK_CTL_SH2_BASE IOMEM(0xE0006000) -#define MSM_CLK_CTL_SH2_PHYS 0xABA01000 -#define MSM_CLK_CTL_SH2_SIZE SZ_4K - -#define MSM_ACC_BASE IOMEM(0xE0007000) -#define MSM_ACC_PHYS 0xC0101000 -#define MSM_ACC_SIZE SZ_4K - -#define MSM_SAW_BASE IOMEM(0xE0008000) -#define MSM_SAW_PHYS 0xC0102000 -#define MSM_SAW_SIZE SZ_4K - -#define MSM_GCC_BASE IOMEM(0xE0009000) -#define MSM_GCC_PHYS 0xC0182000 -#define MSM_GCC_SIZE SZ_4K - -#define MSM_TCSR_BASE IOMEM(0xE000A000) -#define MSM_TCSR_PHYS 0xAB600000 -#define MSM_TCSR_SIZE SZ_4K - -#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000) -#define MSM_SHARED_RAM_PHYS 0x00100000 -#define MSM_SHARED_RAM_SIZE SZ_1M - -#define MSM_UART1_PHYS 0xACA00000 -#define MSM_UART1_SIZE SZ_4K - -#define MSM_UART2_PHYS 0xACB00000 -#define MSM_UART2_SIZE SZ_4K - -#define MSM_UART3_PHYS 0xACC00000 -#define MSM_UART3_SIZE SZ_4K - -#define MSM_MDC_BASE IOMEM(0xE0200000) -#define MSM_MDC_PHYS 0xAA500000 -#define MSM_MDC_SIZE SZ_1M - -#define MSM_AD5_BASE IOMEM(0xE0300000) -#define MSM_AD5_PHYS 0xA7000000 -#define MSM_AD5_SIZE (SZ_1M*13) - -#define MSM_HSUSB_PHYS 0xA3600000 -#define MSM_HSUSB_SIZE SZ_1K - -#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h deleted file mode 100644 index 0faa894729b7..000000000000 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2011 Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - * The MSM peripherals are spread all over across 768MB of physical - * space, which makes just having a simple IO_ADDRESS macro to slide - * them into the right virtual location rough. Instead, we will - * provide a master phys->virt mapping for peripherals here. - * - */ - -#ifndef __ASM_ARCH_MSM_IOMAP_8X50_H -#define __ASM_ARCH_MSM_IOMAP_8X50_H - -/* Physical base address and size of peripherals. - * Ordered by the virtual base addresses they will be mapped at. - * - * MSM_VIC_BASE must be an value that can be loaded via a "mov" - * instruction, otherwise entry-macro.S will not compile. - * - * If you add or remove entries here, you'll want to edit the - * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your - * changes. - * - */ - -#define MSM_VIC_BASE IOMEM(0xE0000000) -#define MSM_VIC_PHYS 0xAC000000 -#define MSM_VIC_SIZE SZ_4K - -#define QSD8X50_CSR_PHYS 0xAC100000 -#define QSD8X50_CSR_SIZE SZ_4K - -#define MSM_DMOV_BASE IOMEM(0xE0002000) -#define MSM_DMOV_PHYS 0xA9700000 -#define MSM_DMOV_SIZE SZ_4K - -#define QSD8X50_GPIO1_PHYS 0xA9000000 -#define QSD8X50_GPIO1_SIZE SZ_4K - -#define QSD8X50_GPIO2_PHYS 0xA9100000 -#define QSD8X50_GPIO2_SIZE SZ_4K - -#define MSM_CLK_CTL_BASE IOMEM(0xE0005000) -#define MSM_CLK_CTL_PHYS 0xA8600000 -#define MSM_CLK_CTL_SIZE SZ_4K - -#define MSM_SIRC_BASE IOMEM(0xE1006000) -#define MSM_SIRC_PHYS 0xAC200000 -#define MSM_SIRC_SIZE SZ_4K - -#define MSM_SCPLL_BASE IOMEM(0xE1007000) -#define MSM_SCPLL_PHYS 0xA8800000 -#define MSM_SCPLL_SIZE SZ_4K - -#ifdef CONFIG_MSM_SOC_REV_A -#define MSM_SMI_BASE 0xE0000000 -#else -#define MSM_SMI_BASE 0x00000000 -#endif - -#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000) -#define MSM_SHARED_RAM_PHYS (MSM_SMI_BASE + 0x00100000) -#define MSM_SHARED_RAM_SIZE SZ_1M - -#define MSM_UART1_PHYS 0xA9A00000 -#define MSM_UART1_SIZE SZ_4K - -#define MSM_UART2_PHYS 0xA9B00000 -#define MSM_UART2_SIZE SZ_4K - -#define MSM_UART3_PHYS 0xA9C00000 -#define MSM_UART3_SIZE SZ_4K - -#define MSM_MDC_BASE IOMEM(0xE0200000) -#define MSM_MDC_PHYS 0xAA500000 -#define MSM_MDC_SIZE SZ_1M - -#define MSM_AD5_BASE IOMEM(0xE0300000) -#define MSM_AD5_PHYS 0xAC000000 -#define MSM_AD5_SIZE (SZ_1M*13) - - -#define MSM_I2C_SIZE SZ_4K -#define MSM_I2C_PHYS 0xA9900000 - -#define MSM_HSUSB_PHYS 0xA0800000 -#define MSM_HSUSB_SIZE SZ_1K - -#define MSM_NAND_PHYS 0xA0A00000 - - -#define MSM_TSIF_PHYS (0xa0100000) -#define MSM_TSIF_SIZE (0x200) - -#define MSM_TSSC_PHYS 0xAA300000 - -#define MSM_UART1DM_PHYS 0xA0200000 -#define MSM_UART2DM_PHYS 0xA0900000 - - -#define MSM_SDC1_PHYS 0xA0300000 -#define MSM_SDC1_SIZE SZ_4K - -#define MSM_SDC2_PHYS 0xA0400000 -#define MSM_SDC2_SIZE SZ_4K - -#define MSM_SDC3_PHYS 0xA0500000 -#define MSM_SDC3_SIZE SZ_4K - -#define MSM_SDC4_PHYS 0xA0600000 -#define MSM_SDC4_SIZE SZ_4K - -#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h deleted file mode 100644 index 0e4f49157684..000000000000 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - * The MSM peripherals are spread all over across 768MB of physical - * space, which makes just having a simple IO_ADDRESS macro to slide - * them into the right virtual location rough. Instead, we will - * provide a master phys->virt mapping for peripherals here. - * - */ - -#ifndef __ASM_ARCH_MSM_IOMAP_H -#define __ASM_ARCH_MSM_IOMAP_H - -#include <asm/sizes.h> - -/* Physical base address and size of peripherals. - * Ordered by the virtual base addresses they will be mapped at. - * - * MSM_VIC_BASE must be an value that can be loaded via a "mov" - * instruction, otherwise entry-macro.S will not compile. - * - * If you add or remove entries here, you'll want to edit the - * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your - * changes. - * - */ - -#if defined(CONFIG_ARCH_MSM7X30) -#include "msm_iomap-7x30.h" -#elif defined(CONFIG_ARCH_QSD8X50) -#include "msm_iomap-8x50.h" -#else -#include "msm_iomap-7x00.h" -#endif - -/* Virtual addresses shared across all MSM targets. */ -#define MSM_CSR_BASE IOMEM(0xE0001000) -#define MSM_GPIO1_BASE IOMEM(0xE0003000) -#define MSM_GPIO2_BASE IOMEM(0xE0004000) - -#endif diff --git a/arch/arm/mach-msm/include/mach/msm_smd.h b/arch/arm/mach-msm/include/mach/msm_smd.h deleted file mode 100644 index 029463ec8756..000000000000 --- a/arch/arm/mach-msm/include/mach/msm_smd.h +++ /dev/null @@ -1,109 +0,0 @@ -/* linux/include/asm-arm/arch-msm/msm_smd.h - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_SMD_H -#define __ASM_ARCH_MSM_SMD_H - -typedef struct smd_channel smd_channel_t; - -extern int (*msm_check_for_modem_crash)(void); - -/* warning: notify() may be called before open returns */ -int smd_open(const char *name, smd_channel_t **ch, void *priv, - void (*notify)(void *priv, unsigned event)); - -#define SMD_EVENT_DATA 1 -#define SMD_EVENT_OPEN 2 -#define SMD_EVENT_CLOSE 3 - -int smd_close(smd_channel_t *ch); - -/* passing a null pointer for data reads and discards */ -int smd_read(smd_channel_t *ch, void *data, int len); - -/* Write to stream channels may do a partial write and return -** the length actually written. -** Write to packet channels will never do a partial write -- -** it will return the requested length written or an error. -*/ -int smd_write(smd_channel_t *ch, const void *data, int len); -int smd_write_atomic(smd_channel_t *ch, const void *data, int len); - -int smd_write_avail(smd_channel_t *ch); -int smd_read_avail(smd_channel_t *ch); - -/* Returns the total size of the current packet being read. -** Returns 0 if no packets available or a stream channel. -*/ -int smd_cur_packet_size(smd_channel_t *ch); - -/* used for tty unthrottling and the like -- causes the notify() -** callback to be called from the same lock context as is used -** when it is called from channel updates -*/ -void smd_kick(smd_channel_t *ch); - - -#if 0 -/* these are interruptable waits which will block you until the specified -** number of bytes are readable or writable. -*/ -int smd_wait_until_readable(smd_channel_t *ch, int bytes); -int smd_wait_until_writable(smd_channel_t *ch, int bytes); -#endif - -typedef enum { - SMD_PORT_DS = 0, - SMD_PORT_DIAG, - SMD_PORT_RPC_CALL, - SMD_PORT_RPC_REPLY, - SMD_PORT_BT, - SMD_PORT_CONTROL, - SMD_PORT_MEMCPY_SPARE1, - SMD_PORT_DATA1, - SMD_PORT_DATA2, - SMD_PORT_DATA3, - SMD_PORT_DATA4, - SMD_PORT_DATA5, - SMD_PORT_DATA6, - SMD_PORT_DATA7, - SMD_PORT_DATA8, - SMD_PORT_DATA9, - SMD_PORT_DATA10, - SMD_PORT_DATA11, - SMD_PORT_DATA12, - SMD_PORT_DATA13, - SMD_PORT_DATA14, - SMD_PORT_DATA15, - SMD_PORT_DATA16, - SMD_PORT_DATA17, - SMD_PORT_DATA18, - SMD_PORT_DATA19, - SMD_PORT_DATA20, - SMD_PORT_GPS_NMEA, - SMD_PORT_BRIDGE_1, - SMD_PORT_BRIDGE_2, - SMD_PORT_BRIDGE_3, - SMD_PORT_BRIDGE_4, - SMD_PORT_BRIDGE_5, - SMD_PORT_LOOPBACK, - SMD_PORT_CS_APPS_MODEM, - SMD_PORT_CS_APPS_DSP, - SMD_PORT_CS_MODEM_DSP, - SMD_NUM_PORTS, -} smd_port_id_type; - -#endif diff --git a/arch/arm/mach-msm/include/mach/sirc.h b/arch/arm/mach-msm/include/mach/sirc.h deleted file mode 100644 index ef55868a5b8a..000000000000 --- a/arch/arm/mach-msm/include/mach/sirc.h +++ /dev/null @@ -1,98 +0,0 @@ -/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MSM_SIRC_H -#define __ASM_ARCH_MSM_SIRC_H - -struct sirc_regs_t { - void *int_enable; - void *int_enable_clear; - void *int_enable_set; - void *int_type; - void *int_polarity; - void *int_clear; -}; - -struct sirc_cascade_regs { - void *int_status; - unsigned int cascade_irq; -}; - -void msm_init_sirc(void); -void msm_sirc_enter_sleep(void); -void msm_sirc_exit_sleep(void); - -#if defined(CONFIG_ARCH_MSM_SCORPION) - -#include <mach/msm_iomap.h> - -/* - * Secondary interrupt controller interrupts - */ - -#define FIRST_SIRC_IRQ (NR_MSM_IRQS + NR_GPIO_IRQS) - -#define INT_UART1 (FIRST_SIRC_IRQ + 0) -#define INT_UART2 (FIRST_SIRC_IRQ + 1) -#define INT_UART3 (FIRST_SIRC_IRQ + 2) -#define INT_UART1_RX (FIRST_SIRC_IRQ + 3) -#define INT_UART2_RX (FIRST_SIRC_IRQ + 4) -#define INT_UART3_RX (FIRST_SIRC_IRQ + 5) -#define INT_SPI_INPUT (FIRST_SIRC_IRQ + 6) -#define INT_SPI_OUTPUT (FIRST_SIRC_IRQ + 7) -#define INT_SPI_ERROR (FIRST_SIRC_IRQ + 8) -#define INT_GPIO_GROUP1 (FIRST_SIRC_IRQ + 9) -#define INT_GPIO_GROUP2 (FIRST_SIRC_IRQ + 10) -#define INT_GPIO_GROUP1_SECURE (FIRST_SIRC_IRQ + 11) -#define INT_GPIO_GROUP2_SECURE (FIRST_SIRC_IRQ + 12) -#define INT_AVS_SVIC (FIRST_SIRC_IRQ + 13) -#define INT_AVS_REQ_UP (FIRST_SIRC_IRQ + 14) -#define INT_AVS_REQ_DOWN (FIRST_SIRC_IRQ + 15) -#define INT_PBUS_ERR (FIRST_SIRC_IRQ + 16) -#define INT_AXI_ERR (FIRST_SIRC_IRQ + 17) -#define INT_SMI_ERR (FIRST_SIRC_IRQ + 18) -#define INT_EBI1_ERR (FIRST_SIRC_IRQ + 19) -#define INT_IMEM_ERR (FIRST_SIRC_IRQ + 20) -#define INT_TEMP_SENSOR (FIRST_SIRC_IRQ + 21) -#define INT_TV_ENC (FIRST_SIRC_IRQ + 22) -#define INT_GRP2D (FIRST_SIRC_IRQ + 23) -#define INT_GSBI_QUP (FIRST_SIRC_IRQ + 24) -#define INT_SC_ACG (FIRST_SIRC_IRQ + 25) -#define INT_WDT0 (FIRST_SIRC_IRQ + 26) -#define INT_WDT1 (FIRST_SIRC_IRQ + 27) - -#if defined(CONFIG_MSM_SOC_REV_A) -#define NR_SIRC_IRQS 28 -#define SIRC_MASK 0x0FFFFFFF -#else -#define NR_SIRC_IRQS 23 -#define SIRC_MASK 0x007FFFFF -#endif - -#define LAST_SIRC_IRQ (FIRST_SIRC_IRQ + NR_SIRC_IRQS - 1) - -#define SPSS_SIRC_INT_SELECT (MSM_SIRC_BASE + 0x00) -#define SPSS_SIRC_INT_ENABLE (MSM_SIRC_BASE + 0x04) -#define SPSS_SIRC_INT_ENABLE_CLEAR (MSM_SIRC_BASE + 0x08) -#define SPSS_SIRC_INT_ENABLE_SET (MSM_SIRC_BASE + 0x0C) -#define SPSS_SIRC_INT_TYPE (MSM_SIRC_BASE + 0x10) -#define SPSS_SIRC_INT_POLARITY (MSM_SIRC_BASE + 0x14) -#define SPSS_SIRC_SECURITY (MSM_SIRC_BASE + 0x18) -#define SPSS_SIRC_IRQ_STATUS (MSM_SIRC_BASE + 0x1C) -#define SPSS_SIRC_IRQ1_STATUS (MSM_SIRC_BASE + 0x20) -#define SPSS_SIRC_RAW_STATUS (MSM_SIRC_BASE + 0x24) -#define SPSS_SIRC_INT_CLEAR (MSM_SIRC_BASE + 0x28) -#define SPSS_SIRC_SOFT_INT (MSM_SIRC_BASE + 0x2C) - -#endif - -#endif diff --git a/arch/arm/mach-msm/include/mach/vreg.h b/arch/arm/mach-msm/include/mach/vreg.h deleted file mode 100644 index 6626e7864e28..000000000000 --- a/arch/arm/mach-msm/include/mach/vreg.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/include/asm-arm/arch-msm/vreg.h - * - * Copyright (C) 2008 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ARCH_ARM_MACH_MSM_VREG_H -#define __ARCH_ARM_MACH_MSM_VREG_H - -struct vreg; - -struct vreg *vreg_get(struct device *dev, const char *id); -void vreg_put(struct vreg *vreg); - -int vreg_enable(struct vreg *vreg); -int vreg_disable(struct vreg *vreg); -int vreg_set_level(struct vreg *vreg, unsigned mv); - -#endif diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c deleted file mode 100644 index b042dca1f633..000000000000 --- a/arch/arm/mach-msm/io.c +++ /dev/null @@ -1,161 +0,0 @@ -/* arch/arm/mach-msm/io.c - * - * MSM7K, QSD io support - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/bug.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/export.h> - -#include <mach/hardware.h> -#include <asm/page.h> -#include <mach/msm_iomap.h> -#include <asm/mach/map.h> - -#include "common.h" - -#define MSM_CHIP_DEVICE_TYPE(name, chip, mem_type) { \ - .virtual = (unsigned long) MSM_##name##_BASE, \ - .pfn = __phys_to_pfn(chip##_##name##_PHYS), \ - .length = chip##_##name##_SIZE, \ - .type = mem_type, \ - } - -#define MSM_DEVICE_TYPE(name, mem_type) \ - MSM_CHIP_DEVICE_TYPE(name, MSM, mem_type) -#define MSM_CHIP_DEVICE(name, chip) \ - MSM_CHIP_DEVICE_TYPE(name, chip, MT_DEVICE) -#define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM) - -#if defined(CONFIG_ARCH_MSM7X00A) -static struct map_desc msm_io_desc[] __initdata = { - MSM_DEVICE_TYPE(VIC, MT_DEVICE_NONSHARED), - MSM_CHIP_DEVICE_TYPE(CSR, MSM7X00, MT_DEVICE_NONSHARED), - MSM_DEVICE_TYPE(DMOV, MT_DEVICE_NONSHARED), - MSM_CHIP_DEVICE_TYPE(GPIO1, MSM7X00, MT_DEVICE_NONSHARED), - MSM_CHIP_DEVICE_TYPE(GPIO2, MSM7X00, MT_DEVICE_NONSHARED), - MSM_DEVICE_TYPE(CLK_CTL, MT_DEVICE_NONSHARED), - { - .virtual = (unsigned long) MSM_SHARED_RAM_BASE, - .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS), - .length = MSM_SHARED_RAM_SIZE, - .type = MT_DEVICE, - }, -#if defined(CONFIG_DEBUG_MSM_UART) - { - /* Must be last: virtual and pfn filled in by debug_ll_addr() */ - .length = SZ_4K, - .type = MT_DEVICE_NONSHARED, - } -#endif -}; - -void __init msm_map_common_io(void) -{ - size_t size = ARRAY_SIZE(msm_io_desc); - - /* Make sure the peripheral register window is closed, since - * we will use PTE flags (TEX[1]=1,B=0,C=1) to determine which - * pages are peripheral interface or not. - */ - asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0)); -#if defined(CONFIG_DEBUG_MSM_UART) -#ifdef CONFIG_MMU - debug_ll_addr(&msm_io_desc[size - 1].pfn, - &msm_io_desc[size - 1].virtual); -#endif - msm_io_desc[size - 1].pfn = __phys_to_pfn(msm_io_desc[size - 1].pfn); -#endif - iotable_init(msm_io_desc, size); -} -#endif - -#ifdef CONFIG_ARCH_QSD8X50 -static struct map_desc qsd8x50_io_desc[] __initdata = { - MSM_DEVICE(VIC), - MSM_CHIP_DEVICE(CSR, QSD8X50), - MSM_DEVICE(DMOV), - MSM_CHIP_DEVICE(GPIO1, QSD8X50), - MSM_CHIP_DEVICE(GPIO2, QSD8X50), - MSM_DEVICE(CLK_CTL), - MSM_DEVICE(SIRC), - MSM_DEVICE(SCPLL), - MSM_DEVICE(AD5), - MSM_DEVICE(MDC), - { - .virtual = (unsigned long) MSM_SHARED_RAM_BASE, - .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS), - .length = MSM_SHARED_RAM_SIZE, - .type = MT_DEVICE, - }, -}; - -void __init msm_map_qsd8x50_io(void) -{ - debug_ll_io_init(); - iotable_init(qsd8x50_io_desc, ARRAY_SIZE(qsd8x50_io_desc)); -} -#endif /* CONFIG_ARCH_QSD8X50 */ - -#ifdef CONFIG_ARCH_MSM7X30 -static struct map_desc msm7x30_io_desc[] __initdata = { - MSM_DEVICE(VIC), - MSM_CHIP_DEVICE(CSR, MSM7X30), - MSM_DEVICE(DMOV), - MSM_CHIP_DEVICE(GPIO1, MSM7X30), - MSM_CHIP_DEVICE(GPIO2, MSM7X30), - MSM_DEVICE(CLK_CTL), - MSM_DEVICE(CLK_CTL_SH2), - MSM_DEVICE(AD5), - MSM_DEVICE(MDC), - MSM_DEVICE(ACC), - MSM_DEVICE(SAW), - MSM_DEVICE(GCC), - MSM_DEVICE(TCSR), - { - .virtual = (unsigned long) MSM_SHARED_RAM_BASE, - .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS), - .length = MSM_SHARED_RAM_SIZE, - .type = MT_DEVICE, - }, -}; - -void __init msm_map_msm7x30_io(void) -{ - debug_ll_io_init(); - iotable_init(msm7x30_io_desc, ARRAY_SIZE(msm7x30_io_desc)); -} -#endif /* CONFIG_ARCH_MSM7X30 */ - -#ifdef CONFIG_ARCH_MSM7X00A -void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size, - unsigned int mtype, void *caller) -{ - if (mtype == MT_DEVICE) { - /* The peripherals in the 88000000 - D0000000 range - * are only accessible by type MT_DEVICE_NONSHARED. - * Adjust mtype as necessary to make this "just work." - */ - if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000)) - mtype = MT_DEVICE_NONSHARED; - } - - return __arm_ioremap_caller(phys_addr, size, mtype, caller); -} -#endif diff --git a/arch/arm/mach-msm/irq-vic.c b/arch/arm/mach-msm/irq-vic.c deleted file mode 100644 index 1b54f807c2d0..000000000000 --- a/arch/arm/mach-msm/irq-vic.c +++ /dev/null @@ -1,363 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009, Code Aurora Forum. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ptrace.h> -#include <linux/timer.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <asm/cacheflush.h> - -#include <mach/hardware.h> - -#include <mach/msm_iomap.h> - -#include "smd_private.h" - -enum { - IRQ_DEBUG_SLEEP_INT_TRIGGER = 1U << 0, - IRQ_DEBUG_SLEEP_INT = 1U << 1, - IRQ_DEBUG_SLEEP_ABORT = 1U << 2, - IRQ_DEBUG_SLEEP = 1U << 3, - IRQ_DEBUG_SLEEP_REQUEST = 1U << 4, -}; -static int msm_irq_debug_mask; -module_param_named(debug_mask, msm_irq_debug_mask, int, - S_IRUGO | S_IWUSR | S_IWGRP); - -#define VIC_REG(off) (MSM_VIC_BASE + (off)) -#define VIC_INT_TO_REG_ADDR(base, irq) (base + (irq / 32) * 4) -#define VIC_INT_TO_REG_INDEX(irq) ((irq >> 5) & 3) - -#define VIC_INT_SELECT0 VIC_REG(0x0000) /* 1: FIQ, 0: IRQ */ -#define VIC_INT_SELECT1 VIC_REG(0x0004) /* 1: FIQ, 0: IRQ */ -#define VIC_INT_SELECT2 VIC_REG(0x0008) /* 1: FIQ, 0: IRQ */ -#define VIC_INT_SELECT3 VIC_REG(0x000C) /* 1: FIQ, 0: IRQ */ -#define VIC_INT_EN0 VIC_REG(0x0010) -#define VIC_INT_EN1 VIC_REG(0x0014) -#define VIC_INT_EN2 VIC_REG(0x0018) -#define VIC_INT_EN3 VIC_REG(0x001C) -#define VIC_INT_ENCLEAR0 VIC_REG(0x0020) -#define VIC_INT_ENCLEAR1 VIC_REG(0x0024) -#define VIC_INT_ENCLEAR2 VIC_REG(0x0028) -#define VIC_INT_ENCLEAR3 VIC_REG(0x002C) -#define VIC_INT_ENSET0 VIC_REG(0x0030) -#define VIC_INT_ENSET1 VIC_REG(0x0034) -#define VIC_INT_ENSET2 VIC_REG(0x0038) -#define VIC_INT_ENSET3 VIC_REG(0x003C) -#define VIC_INT_TYPE0 VIC_REG(0x0040) /* 1: EDGE, 0: LEVEL */ -#define VIC_INT_TYPE1 VIC_REG(0x0044) /* 1: EDGE, 0: LEVEL */ -#define VIC_INT_TYPE2 VIC_REG(0x0048) /* 1: EDGE, 0: LEVEL */ -#define VIC_INT_TYPE3 VIC_REG(0x004C) /* 1: EDGE, 0: LEVEL */ -#define VIC_INT_POLARITY0 VIC_REG(0x0050) /* 1: NEG, 0: POS */ -#define VIC_INT_POLARITY1 VIC_REG(0x0054) /* 1: NEG, 0: POS */ -#define VIC_INT_POLARITY2 VIC_REG(0x0058) /* 1: NEG, 0: POS */ -#define VIC_INT_POLARITY3 VIC_REG(0x005C) /* 1: NEG, 0: POS */ -#define VIC_NO_PEND_VAL VIC_REG(0x0060) - -#if defined(CONFIG_ARCH_MSM_SCORPION) -#define VIC_NO_PEND_VAL_FIQ VIC_REG(0x0064) -#define VIC_INT_MASTEREN VIC_REG(0x0068) /* 1: IRQ, 2: FIQ */ -#define VIC_CONFIG VIC_REG(0x006C) /* 1: USE SC VIC */ -#else -#define VIC_INT_MASTEREN VIC_REG(0x0064) /* 1: IRQ, 2: FIQ */ -#define VIC_PROTECTION VIC_REG(0x006C) /* 1: ENABLE */ -#define VIC_CONFIG VIC_REG(0x0068) /* 1: USE ARM1136 VIC */ -#endif - -#define VIC_IRQ_STATUS0 VIC_REG(0x0080) -#define VIC_IRQ_STATUS1 VIC_REG(0x0084) -#define VIC_IRQ_STATUS2 VIC_REG(0x0088) -#define VIC_IRQ_STATUS3 VIC_REG(0x008C) -#define VIC_FIQ_STATUS0 VIC_REG(0x0090) -#define VIC_FIQ_STATUS1 VIC_REG(0x0094) -#define VIC_FIQ_STATUS2 VIC_REG(0x0098) -#define VIC_FIQ_STATUS3 VIC_REG(0x009C) -#define VIC_RAW_STATUS0 VIC_REG(0x00A0) -#define VIC_RAW_STATUS1 VIC_REG(0x00A4) -#define VIC_RAW_STATUS2 VIC_REG(0x00A8) -#define VIC_RAW_STATUS3 VIC_REG(0x00AC) -#define VIC_INT_CLEAR0 VIC_REG(0x00B0) -#define VIC_INT_CLEAR1 VIC_REG(0x00B4) -#define VIC_INT_CLEAR2 VIC_REG(0x00B8) -#define VIC_INT_CLEAR3 VIC_REG(0x00BC) -#define VIC_SOFTINT0 VIC_REG(0x00C0) -#define VIC_SOFTINT1 VIC_REG(0x00C4) -#define VIC_SOFTINT2 VIC_REG(0x00C8) -#define VIC_SOFTINT3 VIC_REG(0x00CC) -#define VIC_IRQ_VEC_RD VIC_REG(0x00D0) /* pending int # */ -#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4) /* pending vector addr */ -#define VIC_IRQ_VEC_WR VIC_REG(0x00D8) - -#if defined(CONFIG_ARCH_MSM_SCORPION) -#define VIC_FIQ_VEC_RD VIC_REG(0x00DC) -#define VIC_FIQ_VEC_PEND_RD VIC_REG(0x00E0) -#define VIC_FIQ_VEC_WR VIC_REG(0x00E4) -#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E8) -#define VIC_IRQ_IN_STACK VIC_REG(0x00EC) -#define VIC_FIQ_IN_SERVICE VIC_REG(0x00F0) -#define VIC_FIQ_IN_STACK VIC_REG(0x00F4) -#define VIC_TEST_BUS_SEL VIC_REG(0x00F8) -#define VIC_IRQ_CTRL_CONFIG VIC_REG(0x00FC) -#else -#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E0) -#define VIC_IRQ_IN_STACK VIC_REG(0x00E4) -#define VIC_TEST_BUS_SEL VIC_REG(0x00E8) -#endif - -#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4)) -#define VIC_VECTADDR(n) VIC_REG(0x0400+((n) * 4)) - -#if defined(CONFIG_ARCH_MSM7X30) -#define VIC_NUM_REGS 4 -#else -#define VIC_NUM_REGS 2 -#endif - -#if VIC_NUM_REGS == 2 -#define DPRINT_REGS(base_reg, format, ...) \ - printk(KERN_INFO format " %x %x\n", ##__VA_ARGS__, \ - readl(base_reg ## 0), readl(base_reg ## 1)) -#define DPRINT_ARRAY(array, format, ...) \ - printk(KERN_INFO format " %x %x\n", ##__VA_ARGS__, \ - array[0], array[1]) -#elif VIC_NUM_REGS == 4 -#define DPRINT_REGS(base_reg, format, ...) \ - printk(KERN_INFO format " %x %x %x %x\n", ##__VA_ARGS__, \ - readl(base_reg ## 0), readl(base_reg ## 1), \ - readl(base_reg ## 2), readl(base_reg ## 3)) -#define DPRINT_ARRAY(array, format, ...) \ - printk(KERN_INFO format " %x %x %x %x\n", ##__VA_ARGS__, \ - array[0], array[1], \ - array[2], array[3]) -#else -#error "VIC_NUM_REGS set to illegal value" -#endif - -static uint32_t msm_irq_smsm_wake_enable[2]; -static struct { - uint32_t int_en[2]; - uint32_t int_type; - uint32_t int_polarity; - uint32_t int_select; -} msm_irq_shadow_reg[VIC_NUM_REGS]; -static uint32_t msm_irq_idle_disable[VIC_NUM_REGS]; - -#define SMSM_FAKE_IRQ (0xff) -static uint8_t msm_irq_to_smsm[NR_IRQS] = { - [INT_MDDI_EXT] = 1, - [INT_MDDI_PRI] = 2, - [INT_MDDI_CLIENT] = 3, - [INT_USB_OTG] = 4, - - [INT_PWB_I2C] = 5, - [INT_SDC1_0] = 6, - [INT_SDC1_1] = 7, - [INT_SDC2_0] = 8, - - [INT_SDC2_1] = 9, - [INT_ADSP_A9_A11] = 10, - [INT_UART1] = 11, - [INT_UART2] = 12, - - [INT_UART3] = 13, - [INT_UART1_RX] = 14, - [INT_UART2_RX] = 15, - [INT_UART3_RX] = 16, - - [INT_UART1DM_IRQ] = 17, - [INT_UART1DM_RX] = 18, - [INT_KEYSENSE] = 19, -#if !defined(CONFIG_ARCH_MSM7X30) - [INT_AD_HSSD] = 20, -#endif - - [INT_NAND_WR_ER_DONE] = 21, - [INT_NAND_OP_DONE] = 22, - [INT_TCHSCRN1] = 23, - [INT_TCHSCRN2] = 24, - - [INT_TCHSCRN_SSBI] = 25, - [INT_USB_HS] = 26, - [INT_UART2DM_RX] = 27, - [INT_UART2DM_IRQ] = 28, - - [INT_SDC4_1] = 29, - [INT_SDC4_0] = 30, - [INT_SDC3_1] = 31, - [INT_SDC3_0] = 32, - - /* fake wakeup interrupts */ - [INT_GPIO_GROUP1] = SMSM_FAKE_IRQ, - [INT_GPIO_GROUP2] = SMSM_FAKE_IRQ, - [INT_A9_M2A_0] = SMSM_FAKE_IRQ, - [INT_A9_M2A_1] = SMSM_FAKE_IRQ, - [INT_A9_M2A_5] = SMSM_FAKE_IRQ, - [INT_GP_TIMER_EXP] = SMSM_FAKE_IRQ, - [INT_DEBUG_TIMER_EXP] = SMSM_FAKE_IRQ, - [INT_ADSP_A11] = SMSM_FAKE_IRQ, -#ifdef CONFIG_ARCH_QSD8X50 - [INT_SIRC_0] = SMSM_FAKE_IRQ, - [INT_SIRC_1] = SMSM_FAKE_IRQ, -#endif -}; - -static inline void msm_irq_write_all_regs(void __iomem *base, unsigned int val) -{ - int i; - - for (i = 0; i < VIC_NUM_REGS; i++) - writel(val, base + (i * 4)); -} - -static void msm_irq_ack(struct irq_data *d) -{ - void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_CLEAR0, d->irq); - writel(1 << (d->irq & 31), reg); -} - -static void msm_irq_mask(struct irq_data *d) -{ - void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_ENCLEAR0, d->irq); - unsigned index = VIC_INT_TO_REG_INDEX(d->irq); - uint32_t mask = 1UL << (d->irq & 31); - int smsm_irq = msm_irq_to_smsm[d->irq]; - - msm_irq_shadow_reg[index].int_en[0] &= ~mask; - writel(mask, reg); - if (smsm_irq == 0) - msm_irq_idle_disable[index] &= ~mask; - else { - mask = 1UL << (smsm_irq - 1); - msm_irq_smsm_wake_enable[0] &= ~mask; - } -} - -static void msm_irq_unmask(struct irq_data *d) -{ - void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_ENSET0, d->irq); - unsigned index = VIC_INT_TO_REG_INDEX(d->irq); - uint32_t mask = 1UL << (d->irq & 31); - int smsm_irq = msm_irq_to_smsm[d->irq]; - - msm_irq_shadow_reg[index].int_en[0] |= mask; - writel(mask, reg); - - if (smsm_irq == 0) - msm_irq_idle_disable[index] |= mask; - else { - mask = 1UL << (smsm_irq - 1); - msm_irq_smsm_wake_enable[0] |= mask; - } -} - -static int msm_irq_set_wake(struct irq_data *d, unsigned int on) -{ - unsigned index = VIC_INT_TO_REG_INDEX(d->irq); - uint32_t mask = 1UL << (d->irq & 31); - int smsm_irq = msm_irq_to_smsm[d->irq]; - - if (smsm_irq == 0) { - printk(KERN_ERR "msm_irq_set_wake: bad wakeup irq %d\n", d->irq); - return -EINVAL; - } - if (on) - msm_irq_shadow_reg[index].int_en[1] |= mask; - else - msm_irq_shadow_reg[index].int_en[1] &= ~mask; - - if (smsm_irq == SMSM_FAKE_IRQ) - return 0; - - mask = 1UL << (smsm_irq - 1); - if (on) - msm_irq_smsm_wake_enable[1] |= mask; - else - msm_irq_smsm_wake_enable[1] &= ~mask; - return 0; -} - -static int msm_irq_set_type(struct irq_data *d, unsigned int flow_type) -{ - void __iomem *treg = VIC_INT_TO_REG_ADDR(VIC_INT_TYPE0, d->irq); - void __iomem *preg = VIC_INT_TO_REG_ADDR(VIC_INT_POLARITY0, d->irq); - unsigned index = VIC_INT_TO_REG_INDEX(d->irq); - int b = 1 << (d->irq & 31); - uint32_t polarity; - uint32_t type; - - polarity = msm_irq_shadow_reg[index].int_polarity; - if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW)) - polarity |= b; - if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH)) - polarity &= ~b; - writel(polarity, preg); - msm_irq_shadow_reg[index].int_polarity = polarity; - - type = msm_irq_shadow_reg[index].int_type; - if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { - type |= b; - __irq_set_handler_locked(d->irq, handle_edge_irq); - } - if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) { - type &= ~b; - __irq_set_handler_locked(d->irq, handle_level_irq); - } - writel(type, treg); - msm_irq_shadow_reg[index].int_type = type; - return 0; -} - -static struct irq_chip msm_irq_chip = { - .name = "msm", - .irq_disable = msm_irq_mask, - .irq_ack = msm_irq_ack, - .irq_mask = msm_irq_mask, - .irq_unmask = msm_irq_unmask, - .irq_set_wake = msm_irq_set_wake, - .irq_set_type = msm_irq_set_type, -}; - -void __init msm_init_irq(void) -{ - unsigned n; - - /* select level interrupts */ - msm_irq_write_all_regs(VIC_INT_TYPE0, 0); - - /* select highlevel interrupts */ - msm_irq_write_all_regs(VIC_INT_POLARITY0, 0); - - /* select IRQ for all INTs */ - msm_irq_write_all_regs(VIC_INT_SELECT0, 0); - - /* disable all INTs */ - msm_irq_write_all_regs(VIC_INT_EN0, 0); - - /* don't use vic */ - writel(0, VIC_CONFIG); - - /* enable interrupt controller */ - writel(3, VIC_INT_MASTEREN); - - for (n = 0; n < NR_MSM_IRQS; n++) { - irq_set_chip_and_handler(n, &msm_irq_chip, handle_level_irq); - set_irq_flags(n, IRQF_VALID); - } -} diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c deleted file mode 100644 index ea514be390c6..000000000000 --- a/arch/arm/mach-msm/irq.c +++ /dev/null @@ -1,151 +0,0 @@ -/* linux/arch/arm/mach-msm/irq.c - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/ptrace.h> -#include <linux/timer.h> -#include <linux/irq.h> -#include <linux/io.h> - -#include <mach/hardware.h> - -#include <mach/msm_iomap.h> - -#define VIC_REG(off) (MSM_VIC_BASE + (off)) - -#define VIC_INT_SELECT0 VIC_REG(0x0000) /* 1: FIQ, 0: IRQ */ -#define VIC_INT_SELECT1 VIC_REG(0x0004) /* 1: FIQ, 0: IRQ */ -#define VIC_INT_EN0 VIC_REG(0x0010) -#define VIC_INT_EN1 VIC_REG(0x0014) -#define VIC_INT_ENCLEAR0 VIC_REG(0x0020) -#define VIC_INT_ENCLEAR1 VIC_REG(0x0024) -#define VIC_INT_ENSET0 VIC_REG(0x0030) -#define VIC_INT_ENSET1 VIC_REG(0x0034) -#define VIC_INT_TYPE0 VIC_REG(0x0040) /* 1: EDGE, 0: LEVEL */ -#define VIC_INT_TYPE1 VIC_REG(0x0044) /* 1: EDGE, 0: LEVEL */ -#define VIC_INT_POLARITY0 VIC_REG(0x0050) /* 1: NEG, 0: POS */ -#define VIC_INT_POLARITY1 VIC_REG(0x0054) /* 1: NEG, 0: POS */ -#define VIC_NO_PEND_VAL VIC_REG(0x0060) -#define VIC_INT_MASTEREN VIC_REG(0x0064) /* 1: IRQ, 2: FIQ */ -#define VIC_PROTECTION VIC_REG(0x006C) /* 1: ENABLE */ -#define VIC_CONFIG VIC_REG(0x0068) /* 1: USE ARM1136 VIC */ -#define VIC_IRQ_STATUS0 VIC_REG(0x0080) -#define VIC_IRQ_STATUS1 VIC_REG(0x0084) -#define VIC_FIQ_STATUS0 VIC_REG(0x0090) -#define VIC_FIQ_STATUS1 VIC_REG(0x0094) -#define VIC_RAW_STATUS0 VIC_REG(0x00A0) -#define VIC_RAW_STATUS1 VIC_REG(0x00A4) -#define VIC_INT_CLEAR0 VIC_REG(0x00B0) -#define VIC_INT_CLEAR1 VIC_REG(0x00B4) -#define VIC_SOFTINT0 VIC_REG(0x00C0) -#define VIC_SOFTINT1 VIC_REG(0x00C4) -#define VIC_IRQ_VEC_RD VIC_REG(0x00D0) /* pending int # */ -#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4) /* pending vector addr */ -#define VIC_IRQ_VEC_WR VIC_REG(0x00D8) -#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E0) -#define VIC_IRQ_IN_STACK VIC_REG(0x00E4) -#define VIC_TEST_BUS_SEL VIC_REG(0x00E8) - -#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4)) -#define VIC_VECTADDR(n) VIC_REG(0x0400+((n) * 4)) - -static void msm_irq_ack(struct irq_data *d) -{ - void __iomem *reg = VIC_INT_CLEAR0 + ((d->irq & 32) ? 4 : 0); - writel(1 << (d->irq & 31), reg); -} - -static void msm_irq_mask(struct irq_data *d) -{ - void __iomem *reg = VIC_INT_ENCLEAR0 + ((d->irq & 32) ? 4 : 0); - writel(1 << (d->irq & 31), reg); -} - -static void msm_irq_unmask(struct irq_data *d) -{ - void __iomem *reg = VIC_INT_ENSET0 + ((d->irq & 32) ? 4 : 0); - writel(1 << (d->irq & 31), reg); -} - -static int msm_irq_set_wake(struct irq_data *d, unsigned int on) -{ - return -EINVAL; -} - -static int msm_irq_set_type(struct irq_data *d, unsigned int flow_type) -{ - void __iomem *treg = VIC_INT_TYPE0 + ((d->irq & 32) ? 4 : 0); - void __iomem *preg = VIC_INT_POLARITY0 + ((d->irq & 32) ? 4 : 0); - int b = 1 << (d->irq & 31); - - if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW)) - writel(readl(preg) | b, preg); - if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH)) - writel(readl(preg) & (~b), preg); - - if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { - writel(readl(treg) | b, treg); - __irq_set_handler_locked(d->irq, handle_edge_irq); - } - if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) { - writel(readl(treg) & (~b), treg); - __irq_set_handler_locked(d->irq, handle_level_irq); - } - return 0; -} - -static struct irq_chip msm_irq_chip = { - .name = "msm", - .irq_ack = msm_irq_ack, - .irq_mask = msm_irq_mask, - .irq_unmask = msm_irq_unmask, - .irq_set_wake = msm_irq_set_wake, - .irq_set_type = msm_irq_set_type, -}; - -void __init msm_init_irq(void) -{ - unsigned n; - - /* select level interrupts */ - writel(0, VIC_INT_TYPE0); - writel(0, VIC_INT_TYPE1); - - /* select highlevel interrupts */ - writel(0, VIC_INT_POLARITY0); - writel(0, VIC_INT_POLARITY1); - - /* select IRQ for all INTs */ - writel(0, VIC_INT_SELECT0); - writel(0, VIC_INT_SELECT1); - - /* disable all INTs */ - writel(0, VIC_INT_EN0); - writel(0, VIC_INT_EN1); - - /* don't use 1136 vic */ - writel(0, VIC_CONFIG); - - /* enable interrupt controller */ - writel(1, VIC_INT_MASTEREN); - - for (n = 0; n < NR_MSM_IRQS; n++) { - irq_set_chip_and_handler(n, &msm_irq_chip, handle_level_irq); - set_irq_flags(n, IRQF_VALID); - } -} diff --git a/arch/arm/mach-msm/last_radio_log.c b/arch/arm/mach-msm/last_radio_log.c deleted file mode 100644 index 9c392a29fc7e..000000000000 --- a/arch/arm/mach-msm/last_radio_log.c +++ /dev/null @@ -1,71 +0,0 @@ -/* arch/arm/mach-msm/last_radio_log.c - * - * Extract the log from a modem crash though SMEM - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/fs.h> -#include <linux/proc_fs.h> -#include <linux/uaccess.h> - -#include "smd_private.h" - -static void *radio_log_base; -static size_t radio_log_size; - -extern void *smem_item(unsigned id, unsigned *size); - -static ssize_t last_radio_log_read(struct file *file, char __user *buf, - size_t len, loff_t *offset) -{ - return simple_read_from_buffer(buf, len, offset, - radio_log_base, radio_log_size); -} - -static struct file_operations last_radio_log_fops = { - .read = last_radio_log_read, - .llseek = default_llseek, -}; - -void msm_init_last_radio_log(struct module *owner) -{ - struct proc_dir_entry *entry; - - if (last_radio_log_fops.owner) { - pr_err("%s: already claimed\n", __func__); - return; - } - - radio_log_base = smem_item(SMEM_CLKREGIM_BSP, &radio_log_size); - if (!radio_log_base) { - pr_err("%s: could not retrieve SMEM_CLKREGIM_BSP\n", __func__); - return; - } - - entry = proc_create("last_radio_log", S_IRUGO, NULL, - &last_radio_log_fops); - if (!entry) { - pr_err("%s: could not create proc entry for radio log\n", - __func__); - return; - } - - pr_err("%s: last radio log is %d bytes long\n", __func__, - radio_log_size); - last_radio_log_fops.owner = owner; - proc_set_size(entry, radio_log_size); -} -EXPORT_SYMBOL(msm_init_last_radio_log); diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c deleted file mode 100644 index 507f5ca80697..000000000000 --- a/arch/arm/mach-msm/proc_comm.c +++ /dev/null @@ -1,129 +0,0 @@ -/* arch/arm/mach-msm/proc_comm.c - * - * Copyright (C) 2007-2008 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/spinlock.h> -#include <mach/msm_iomap.h> - -#include "proc_comm.h" - -static inline void msm_a2m_int(uint32_t irq) -{ -#if defined(CONFIG_ARCH_MSM7X30) - writel(1 << irq, MSM_GCC_BASE + 0x8); -#else - writel(1, MSM_CSR_BASE + 0x400 + (irq * 4)); -#endif -} - -static inline void notify_other_proc_comm(void) -{ - msm_a2m_int(6); -} - -#define APP_COMMAND 0x00 -#define APP_STATUS 0x04 -#define APP_DATA1 0x08 -#define APP_DATA2 0x0C - -#define MDM_COMMAND 0x10 -#define MDM_STATUS 0x14 -#define MDM_DATA1 0x18 -#define MDM_DATA2 0x1C - -static DEFINE_SPINLOCK(proc_comm_lock); - -/* The higher level SMD support will install this to - * provide a way to check for and handle modem restart. - */ -int (*msm_check_for_modem_crash)(void); - -/* Poll for a state change, checking for possible - * modem crashes along the way (so we don't wait - * forever while the ARM9 is blowing up). - * - * Return an error in the event of a modem crash and - * restart so the msm_proc_comm() routine can restart - * the operation from the beginning. - */ -static int proc_comm_wait_for(void __iomem *addr, unsigned value) -{ - for (;;) { - if (readl(addr) == value) - return 0; - - if (msm_check_for_modem_crash) - if (msm_check_for_modem_crash()) - return -EAGAIN; - } -} - -int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2) -{ - void __iomem *base = MSM_SHARED_RAM_BASE; - unsigned long flags; - int ret; - - spin_lock_irqsave(&proc_comm_lock, flags); - - for (;;) { - if (proc_comm_wait_for(base + MDM_STATUS, PCOM_READY)) - continue; - - writel(cmd, base + APP_COMMAND); - writel(data1 ? *data1 : 0, base + APP_DATA1); - writel(data2 ? *data2 : 0, base + APP_DATA2); - - notify_other_proc_comm(); - - if (proc_comm_wait_for(base + APP_COMMAND, PCOM_CMD_DONE)) - continue; - - if (readl(base + APP_STATUS) != PCOM_CMD_FAIL) { - if (data1) - *data1 = readl(base + APP_DATA1); - if (data2) - *data2 = readl(base + APP_DATA2); - ret = 0; - } else { - ret = -EIO; - } - break; - } - - writel(PCOM_CMD_IDLE, base + APP_COMMAND); - - spin_unlock_irqrestore(&proc_comm_lock, flags); - - return ret; -} - -/* - * We need to wait for the ARM9 to at least partially boot - * up before we can continue. Since the ARM9 does resource - * allocation, if we dont' wait we could end up crashing or in - * and unknown state. This function should be called early to - * wait on the ARM9. - */ -void proc_comm_boot_wait(void) -{ - void __iomem *base = MSM_SHARED_RAM_BASE; - - proc_comm_wait_for(base + MDM_STATUS, PCOM_READY); - -} diff --git a/arch/arm/mach-msm/proc_comm.h b/arch/arm/mach-msm/proc_comm.h deleted file mode 100644 index e8d043a0e990..000000000000 --- a/arch/arm/mach-msm/proc_comm.h +++ /dev/null @@ -1,258 +0,0 @@ -/* arch/arm/mach-msm/proc_comm.h - * - * Copyright (c) 2007 QUALCOMM Incorporated - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef _ARCH_ARM_MACH_MSM_PROC_COMM_H_ -#define _ARCH_ARM_MACH_MSM_PROC_COMM_H_ - -#include <linux/init.h> - -enum { - PCOM_CMD_IDLE = 0x0, - PCOM_CMD_DONE, - PCOM_RESET_APPS, - PCOM_RESET_CHIP, - PCOM_CONFIG_NAND_MPU, - PCOM_CONFIG_USB_CLKS, - PCOM_GET_POWER_ON_STATUS, - PCOM_GET_WAKE_UP_STATUS, - PCOM_GET_BATT_LEVEL, - PCOM_CHG_IS_CHARGING, - PCOM_POWER_DOWN, - PCOM_USB_PIN_CONFIG, - PCOM_USB_PIN_SEL, - PCOM_SET_RTC_ALARM, - PCOM_NV_READ, - PCOM_NV_WRITE, - PCOM_GET_UUID_HIGH, - PCOM_GET_UUID_LOW, - PCOM_GET_HW_ENTROPY, - PCOM_RPC_GPIO_TLMM_CONFIG_REMOTE, - PCOM_CLKCTL_RPC_ENABLE, - PCOM_CLKCTL_RPC_DISABLE, - PCOM_CLKCTL_RPC_RESET, - PCOM_CLKCTL_RPC_SET_FLAGS, - PCOM_CLKCTL_RPC_SET_RATE, - PCOM_CLKCTL_RPC_MIN_RATE, - PCOM_CLKCTL_RPC_MAX_RATE, - PCOM_CLKCTL_RPC_RATE, - PCOM_CLKCTL_RPC_PLL_REQUEST, - PCOM_CLKCTL_RPC_ENABLED, - PCOM_VREG_SWITCH, - PCOM_VREG_SET_LEVEL, - PCOM_GPIO_TLMM_CONFIG_GROUP, - PCOM_GPIO_TLMM_UNCONFIG_GROUP, - PCOM_NV_WRITE_BYTES_4_7, - PCOM_CONFIG_DISP, - PCOM_GET_FTM_BOOT_COUNT, - PCOM_RPC_GPIO_TLMM_CONFIG_EX, - PCOM_PM_MPP_CONFIG, - PCOM_GPIO_IN, - PCOM_GPIO_OUT, - PCOM_RESET_MODEM, - PCOM_RESET_CHIP_IMM, - PCOM_PM_VID_EN, - PCOM_VREG_PULLDOWN, - PCOM_GET_MODEM_VERSION, - PCOM_CLK_REGIME_SEC_RESET, - PCOM_CLK_REGIME_SEC_RESET_ASSERT, - PCOM_CLK_REGIME_SEC_RESET_DEASSERT, - PCOM_CLK_REGIME_SEC_PLL_REQUEST_WRP, - PCOM_CLK_REGIME_SEC_ENABLE, - PCOM_CLK_REGIME_SEC_DISABLE, - PCOM_CLK_REGIME_SEC_IS_ON, - PCOM_CLK_REGIME_SEC_SEL_CLK_INV, - PCOM_CLK_REGIME_SEC_SEL_CLK_SRC, - PCOM_CLK_REGIME_SEC_SEL_CLK_DIV, - PCOM_CLK_REGIME_SEC_ICODEC_CLK_ENABLE, - PCOM_CLK_REGIME_SEC_ICODEC_CLK_DISABLE, - PCOM_CLK_REGIME_SEC_SEL_SPEED, - PCOM_CLK_REGIME_SEC_CONFIG_GP_CLK_WRP, - PCOM_CLK_REGIME_SEC_CONFIG_MDH_CLK_WRP, - PCOM_CLK_REGIME_SEC_USB_XTAL_ON, - PCOM_CLK_REGIME_SEC_USB_XTAL_OFF, - PCOM_CLK_REGIME_SEC_SET_QDSP_DME_MODE, - PCOM_CLK_REGIME_SEC_SWITCH_ADSP_CLK, - PCOM_CLK_REGIME_SEC_GET_MAX_ADSP_CLK_KHZ, - PCOM_CLK_REGIME_SEC_GET_I2C_CLK_KHZ, - PCOM_CLK_REGIME_SEC_MSM_GET_CLK_FREQ_KHZ, - PCOM_CLK_REGIME_SEC_SEL_VFE_SRC, - PCOM_CLK_REGIME_SEC_MSM_SEL_CAMCLK, - PCOM_CLK_REGIME_SEC_MSM_SEL_LCDCLK, - PCOM_CLK_REGIME_SEC_VFE_RAIL_OFF, - PCOM_CLK_REGIME_SEC_VFE_RAIL_ON, - PCOM_CLK_REGIME_SEC_GRP_RAIL_OFF, - PCOM_CLK_REGIME_SEC_GRP_RAIL_ON, - PCOM_CLK_REGIME_SEC_VDC_RAIL_OFF, - PCOM_CLK_REGIME_SEC_VDC_RAIL_ON, - PCOM_CLK_REGIME_SEC_LCD_CTRL, - PCOM_CLK_REGIME_SEC_REGISTER_FOR_CPU_RESOURCE, - PCOM_CLK_REGIME_SEC_DEREGISTER_FOR_CPU_RESOURCE, - PCOM_CLK_REGIME_SEC_RESOURCE_REQUEST_WRP, - PCOM_CLK_REGIME_MSM_SEC_SEL_CLK_OWNER, - PCOM_CLK_REGIME_SEC_DEVMAN_REQUEST_WRP, - PCOM_GPIO_CONFIG, - PCOM_GPIO_CONFIGURE_GROUP, - PCOM_GPIO_TLMM_SET_PORT, - PCOM_GPIO_TLMM_CONFIG_EX, - PCOM_SET_FTM_BOOT_COUNT, - PCOM_RESERVED0, - PCOM_RESERVED1, - PCOM_CUSTOMER_CMD1, - PCOM_CUSTOMER_CMD2, - PCOM_CUSTOMER_CMD3, - PCOM_CLK_REGIME_ENTER_APPSBL_CHG_MODE, - PCOM_CLK_REGIME_EXIT_APPSBL_CHG_MODE, - PCOM_CLK_REGIME_SEC_RAIL_DISABLE, - PCOM_CLK_REGIME_SEC_RAIL_ENABLE, - PCOM_CLK_REGIME_SEC_RAIL_CONTROL, - PCOM_SET_SW_WATCHDOG_STATE, - PCOM_PM_MPP_CONFIG_DIGITAL_INPUT, - PCOM_PM_MPP_CONFIG_I_SINK, - PCOM_RESERVED_101, - PCOM_MSM_HSUSB_PHY_RESET, - PCOM_GET_BATT_MV_LEVEL, - PCOM_CHG_USB_IS_PC_CONNECTED, - PCOM_CHG_USB_IS_CHARGER_CONNECTED, - PCOM_CHG_USB_IS_DISCONNECTED, - PCOM_CHG_USB_IS_AVAILABLE, - PCOM_CLK_REGIME_SEC_MSM_SEL_FREQ, - PCOM_CLK_REGIME_SEC_SET_PCLK_AXI_POLICY, - PCOM_CLKCTL_RPC_RESET_ASSERT, - PCOM_CLKCTL_RPC_RESET_DEASSERT, - PCOM_CLKCTL_RPC_RAIL_ON, - PCOM_CLKCTL_RPC_RAIL_OFF, - PCOM_CLKCTL_RPC_RAIL_ENABLE, - PCOM_CLKCTL_RPC_RAIL_DISABLE, - PCOM_CLKCTL_RPC_RAIL_CONTROL, - PCOM_CLKCTL_RPC_MIN_MSMC1, - PCOM_NUM_CMDS, -}; - -enum { - PCOM_INVALID_STATUS = 0x0, - PCOM_READY, - PCOM_CMD_RUNNING, - PCOM_CMD_SUCCESS, - PCOM_CMD_FAIL, - PCOM_CMD_FAIL_FALSE_RETURNED, - PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_SERVER, - PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_CLIENT, - PCOM_CMD_FAIL_CMD_UNREGISTERED, - PCOM_CMD_FAIL_CMD_LOCKED, - PCOM_CMD_FAIL_SERVER_NOT_YET_READY, - PCOM_CMD_FAIL_BAD_DESTINATION, - PCOM_CMD_FAIL_SERVER_RESET, - PCOM_CMD_FAIL_SMSM_NOT_INIT, - PCOM_CMD_FAIL_PROC_COMM_BUSY, - PCOM_CMD_FAIL_PROC_COMM_NOT_INIT, - -}; - -/* List of VREGs that support the Pull Down Resistor setting. */ -enum vreg_pdown_id { - PM_VREG_PDOWN_MSMA_ID, - PM_VREG_PDOWN_MSMP_ID, - PM_VREG_PDOWN_MSME1_ID, /* Not supported in Panoramix */ - PM_VREG_PDOWN_MSMC1_ID, /* Not supported in PM6620 */ - PM_VREG_PDOWN_MSMC2_ID, /* Supported in PM7500 only */ - PM_VREG_PDOWN_GP3_ID, /* Supported in PM7500 only */ - PM_VREG_PDOWN_MSME2_ID, /* Supported in PM7500 and Panoramix only */ - PM_VREG_PDOWN_GP4_ID, /* Supported in PM7500 only */ - PM_VREG_PDOWN_GP1_ID, /* Supported in PM7500 only */ - PM_VREG_PDOWN_TCXO_ID, - PM_VREG_PDOWN_PA_ID, - PM_VREG_PDOWN_RFTX_ID, - PM_VREG_PDOWN_RFRX1_ID, - PM_VREG_PDOWN_RFRX2_ID, - PM_VREG_PDOWN_SYNT_ID, - PM_VREG_PDOWN_WLAN_ID, - PM_VREG_PDOWN_USB_ID, - PM_VREG_PDOWN_MMC_ID, - PM_VREG_PDOWN_RUIM_ID, - PM_VREG_PDOWN_MSMC0_ID, /* Supported in PM6610 only */ - PM_VREG_PDOWN_GP2_ID, /* Supported in PM7500 only */ - PM_VREG_PDOWN_GP5_ID, /* Supported in PM7500 only */ - PM_VREG_PDOWN_GP6_ID, /* Supported in PM7500 only */ - PM_VREG_PDOWN_RF_ID, - PM_VREG_PDOWN_RF_VCO_ID, - PM_VREG_PDOWN_MPLL_ID, - PM_VREG_PDOWN_S2_ID, - PM_VREG_PDOWN_S3_ID, - PM_VREG_PDOWN_RFUBM_ID, - - /* new for HAN */ - PM_VREG_PDOWN_RF1_ID, - PM_VREG_PDOWN_RF2_ID, - PM_VREG_PDOWN_RFA_ID, - PM_VREG_PDOWN_CDC2_ID, - PM_VREG_PDOWN_RFTX2_ID, - PM_VREG_PDOWN_USIM_ID, - PM_VREG_PDOWN_USB2P6_ID, - PM_VREG_PDOWN_USB3P3_ID, - PM_VREG_PDOWN_INVALID_ID, - - /* backward compatible enums only */ - PM_VREG_PDOWN_CAM_ID = PM_VREG_PDOWN_GP1_ID, - PM_VREG_PDOWN_MDDI_ID = PM_VREG_PDOWN_GP2_ID, - PM_VREG_PDOWN_RUIM2_ID = PM_VREG_PDOWN_GP3_ID, - PM_VREG_PDOWN_AUX_ID = PM_VREG_PDOWN_GP4_ID, - PM_VREG_PDOWN_AUX2_ID = PM_VREG_PDOWN_GP5_ID, - PM_VREG_PDOWN_BT_ID = PM_VREG_PDOWN_GP6_ID, - - PM_VREG_PDOWN_MSME_ID = PM_VREG_PDOWN_MSME1_ID, - PM_VREG_PDOWN_MSMC_ID = PM_VREG_PDOWN_MSMC1_ID, - PM_VREG_PDOWN_RFA1_ID = PM_VREG_PDOWN_RFRX2_ID, - PM_VREG_PDOWN_RFA2_ID = PM_VREG_PDOWN_RFTX2_ID, - PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID -}; - -enum { - PCOM_CLKRGM_APPS_RESET_USB_PHY = 34, - PCOM_CLKRGM_APPS_RESET_USBH = 37, -}; - -/* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */ - -#define GPIO_ENABLE 0 -#define GPIO_DISABLE 1 - -#define GPIO_INPUT 0 -#define GPIO_OUTPUT 1 - -#define GPIO_NO_PULL 0 -#define GPIO_PULL_DOWN 1 -#define GPIO_KEEPER 2 -#define GPIO_PULL_UP 3 - -#define GPIO_2MA 0 -#define GPIO_4MA 1 -#define GPIO_6MA 2 -#define GPIO_8MA 3 -#define GPIO_10MA 4 -#define GPIO_12MA 5 -#define GPIO_14MA 6 -#define GPIO_16MA 7 - -#define PCOM_GPIO_CFG(gpio, func, dir, pull, drvstr) \ - ((((gpio) & 0x3FF) << 4) | \ - ((func) & 0xf) | \ - (((dir) & 0x1) << 14) | \ - (((pull) & 0x3) << 15) | \ - (((drvstr) & 0xF) << 17)) - -int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2); -void proc_comm_boot_wait(void); - -#endif diff --git a/arch/arm/mach-msm/sirc.c b/arch/arm/mach-msm/sirc.c deleted file mode 100644 index 689e78c95f38..000000000000 --- a/arch/arm/mach-msm/sirc.c +++ /dev/null @@ -1,172 +0,0 @@ -/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - */ - -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <asm/irq.h> - -static unsigned int int_enable; -static unsigned int wake_enable; - -static struct sirc_regs_t sirc_regs = { - .int_enable = SPSS_SIRC_INT_ENABLE, - .int_enable_clear = SPSS_SIRC_INT_ENABLE_CLEAR, - .int_enable_set = SPSS_SIRC_INT_ENABLE_SET, - .int_type = SPSS_SIRC_INT_TYPE, - .int_polarity = SPSS_SIRC_INT_POLARITY, - .int_clear = SPSS_SIRC_INT_CLEAR, -}; - -static struct sirc_cascade_regs sirc_reg_table[] = { - { - .int_status = SPSS_SIRC_IRQ_STATUS, - .cascade_irq = INT_SIRC_0, - } -}; - -/* Mask off the given interrupt. Keep the int_enable mask in sync with - the enable reg, so it can be restored after power collapse. */ -static void sirc_irq_mask(struct irq_data *d) -{ - unsigned int mask; - - mask = 1 << (d->irq - FIRST_SIRC_IRQ); - writel(mask, sirc_regs.int_enable_clear); - int_enable &= ~mask; - return; -} - -/* Unmask the given interrupt. Keep the int_enable mask in sync with - the enable reg, so it can be restored after power collapse. */ -static void sirc_irq_unmask(struct irq_data *d) -{ - unsigned int mask; - - mask = 1 << (d->irq - FIRST_SIRC_IRQ); - writel(mask, sirc_regs.int_enable_set); - int_enable |= mask; - return; -} - -static void sirc_irq_ack(struct irq_data *d) -{ - unsigned int mask; - - mask = 1 << (d->irq - FIRST_SIRC_IRQ); - writel(mask, sirc_regs.int_clear); - return; -} - -static int sirc_irq_set_wake(struct irq_data *d, unsigned int on) -{ - unsigned int mask; - - /* Used to set the interrupt enable mask during power collapse. */ - mask = 1 << (d->irq - FIRST_SIRC_IRQ); - if (on) - wake_enable |= mask; - else - wake_enable &= ~mask; - - return 0; -} - -static int sirc_irq_set_type(struct irq_data *d, unsigned int flow_type) -{ - unsigned int mask; - unsigned int val; - - mask = 1 << (d->irq - FIRST_SIRC_IRQ); - val = readl(sirc_regs.int_polarity); - - if (flow_type & (IRQF_TRIGGER_LOW | IRQF_TRIGGER_FALLING)) - val |= mask; - else - val &= ~mask; - - writel(val, sirc_regs.int_polarity); - - val = readl(sirc_regs.int_type); - if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { - val |= mask; - __irq_set_handler_locked(d->irq, handle_edge_irq); - } else { - val &= ~mask; - __irq_set_handler_locked(d->irq, handle_level_irq); - } - - writel(val, sirc_regs.int_type); - - return 0; -} - -/* Finds the pending interrupt on the passed cascade irq and redrives it */ -static void sirc_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned int reg = 0; - unsigned int sirq; - unsigned int status; - - while ((reg < ARRAY_SIZE(sirc_reg_table)) && - (sirc_reg_table[reg].cascade_irq != irq)) - reg++; - - status = readl(sirc_reg_table[reg].int_status); - status &= SIRC_MASK; - if (status == 0) - return; - - for (sirq = 0; - (sirq < NR_SIRC_IRQS) && ((status & (1U << sirq)) == 0); - sirq++) - ; - generic_handle_irq(sirq+FIRST_SIRC_IRQ); - - desc->irq_data.chip->irq_ack(&desc->irq_data); -} - -static struct irq_chip sirc_irq_chip = { - .name = "sirc", - .irq_ack = sirc_irq_ack, - .irq_mask = sirc_irq_mask, - .irq_unmask = sirc_irq_unmask, - .irq_set_wake = sirc_irq_set_wake, - .irq_set_type = sirc_irq_set_type, -}; - -void __init msm_init_sirc(void) -{ - int i; - - int_enable = 0; - wake_enable = 0; - - for (i = FIRST_SIRC_IRQ; i < LAST_SIRC_IRQ; i++) { - irq_set_chip_and_handler(i, &sirc_irq_chip, handle_edge_irq); - set_irq_flags(i, IRQF_VALID); - } - - for (i = 0; i < ARRAY_SIZE(sirc_reg_table); i++) { - irq_set_chained_handler(sirc_reg_table[i].cascade_irq, - sirc_irq_handler); - irq_set_irq_wake(sirc_reg_table[i].cascade_irq, 1); - } - return; -} - diff --git a/arch/arm/mach-msm/smd.c b/arch/arm/mach-msm/smd.c deleted file mode 100644 index 7550f5a08956..000000000000 --- a/arch/arm/mach-msm/smd.c +++ /dev/null @@ -1,1034 +0,0 @@ -/* arch/arm/mach-msm/smd.c - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/fs.h> -#include <linux/cdev.h> -#include <linux/device.h> -#include <linux/wait.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/list.h> -#include <linux/slab.h> -#include <linux/debugfs.h> -#include <linux/delay.h> - -#include <mach/msm_smd.h> - -#include "smd_private.h" -#include "proc_comm.h" - -#if defined(CONFIG_ARCH_QSD8X50) -#define CONFIG_QDSP6 1 -#endif - -#define MODULE_NAME "msm_smd" - -enum { - MSM_SMD_DEBUG = 1U << 0, - MSM_SMSM_DEBUG = 1U << 0, -}; - -static int msm_smd_debug_mask; - -struct shared_info { - int ready; - void __iomem *state; -}; - -static unsigned dummy_state[SMSM_STATE_COUNT]; - -static struct shared_info smd_info = { - /* FIXME: not a real __iomem pointer */ - .state = &dummy_state, -}; - -module_param_named(debug_mask, msm_smd_debug_mask, - int, S_IRUGO | S_IWUSR | S_IWGRP); - -static unsigned last_heap_free = 0xffffffff; - -static inline void notify_other_smsm(void) -{ - msm_a2m_int(5); -#ifdef CONFIG_QDSP6 - msm_a2m_int(8); -#endif -} - -static inline void notify_modem_smd(void) -{ - msm_a2m_int(0); -} - -static inline void notify_dsp_smd(void) -{ - msm_a2m_int(8); -} - -static void smd_diag(void) -{ - char *x; - - x = smem_find(ID_DIAG_ERR_MSG, SZ_DIAG_ERR_MSG); - if (x != 0) { - x[SZ_DIAG_ERR_MSG - 1] = 0; - pr_debug("DIAG '%s'\n", x); - } -} - -/* call when SMSM_RESET flag is set in the A9's smsm_state */ -static void handle_modem_crash(void) -{ - pr_err("ARM9 has CRASHED\n"); - smd_diag(); - - /* in this case the modem or watchdog should reboot us */ - for (;;) - ; -} - -uint32_t raw_smsm_get_state(enum smsm_state_item item) -{ - return readl(smd_info.state + item * 4); -} - -static int check_for_modem_crash(void) -{ - if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET) { - handle_modem_crash(); - return -1; - } - return 0; -} - -/* the spinlock is used to synchronize between the - * irq handler and code that mutates the channel - * list or fiddles with channel state - */ -DEFINE_SPINLOCK(smd_lock); -DEFINE_SPINLOCK(smem_lock); - -/* the mutex is used during open() and close() - * operations to avoid races while creating or - * destroying smd_channel structures - */ -static DEFINE_MUTEX(smd_creation_mutex); - -static int smd_initialized; - -LIST_HEAD(smd_ch_closed_list); -LIST_HEAD(smd_ch_list_modem); -LIST_HEAD(smd_ch_list_dsp); - -static unsigned char smd_ch_allocated[64]; -static struct work_struct probe_work; - -/* how many bytes are available for reading */ -static int smd_stream_read_avail(struct smd_channel *ch) -{ - return (ch->recv->head - ch->recv->tail) & ch->fifo_mask; -} - -/* how many bytes we are free to write */ -static int smd_stream_write_avail(struct smd_channel *ch) -{ - return ch->fifo_mask - - ((ch->send->head - ch->send->tail) & ch->fifo_mask); -} - -static int smd_packet_read_avail(struct smd_channel *ch) -{ - if (ch->current_packet) { - int n = smd_stream_read_avail(ch); - if (n > ch->current_packet) - n = ch->current_packet; - return n; - } else { - return 0; - } -} - -static int smd_packet_write_avail(struct smd_channel *ch) -{ - int n = smd_stream_write_avail(ch); - return n > SMD_HEADER_SIZE ? n - SMD_HEADER_SIZE : 0; -} - -static int ch_is_open(struct smd_channel *ch) -{ - return (ch->recv->state == SMD_SS_OPENED) && - (ch->send->state == SMD_SS_OPENED); -} - -/* provide a pointer and length to readable data in the fifo */ -static unsigned ch_read_buffer(struct smd_channel *ch, void **ptr) -{ - unsigned head = ch->recv->head; - unsigned tail = ch->recv->tail; - *ptr = (void *) (ch->recv_data + tail); - - if (tail <= head) - return head - tail; - else - return ch->fifo_size - tail; -} - -/* advance the fifo read pointer after data from ch_read_buffer is consumed */ -static void ch_read_done(struct smd_channel *ch, unsigned count) -{ - BUG_ON(count > smd_stream_read_avail(ch)); - ch->recv->tail = (ch->recv->tail + count) & ch->fifo_mask; - ch->send->fTAIL = 1; -} - -/* basic read interface to ch_read_{buffer,done} used - * by smd_*_read() and update_packet_state() - * will read-and-discard if the _data pointer is null - */ -static int ch_read(struct smd_channel *ch, void *_data, int len) -{ - void *ptr; - unsigned n; - unsigned char *data = _data; - int orig_len = len; - - while (len > 0) { - n = ch_read_buffer(ch, &ptr); - if (n == 0) - break; - - if (n > len) - n = len; - if (_data) - memcpy(data, ptr, n); - - data += n; - len -= n; - ch_read_done(ch, n); - } - - return orig_len - len; -} - -static void update_stream_state(struct smd_channel *ch) -{ - /* streams have no special state requiring updating */ -} - -static void update_packet_state(struct smd_channel *ch) -{ - unsigned hdr[5]; - int r; - - /* can't do anything if we're in the middle of a packet */ - if (ch->current_packet != 0) - return; - - /* don't bother unless we can get the full header */ - if (smd_stream_read_avail(ch) < SMD_HEADER_SIZE) - return; - - r = ch_read(ch, hdr, SMD_HEADER_SIZE); - BUG_ON(r != SMD_HEADER_SIZE); - - ch->current_packet = hdr[0]; -} - -/* provide a pointer and length to next free space in the fifo */ -static unsigned ch_write_buffer(struct smd_channel *ch, void **ptr) -{ - unsigned head = ch->send->head; - unsigned tail = ch->send->tail; - *ptr = (void *) (ch->send_data + head); - - if (head < tail) { - return tail - head - 1; - } else { - if (tail == 0) - return ch->fifo_size - head - 1; - else - return ch->fifo_size - head; - } -} - -/* advace the fifo write pointer after freespace - * from ch_write_buffer is filled - */ -static void ch_write_done(struct smd_channel *ch, unsigned count) -{ - BUG_ON(count > smd_stream_write_avail(ch)); - ch->send->head = (ch->send->head + count) & ch->fifo_mask; - ch->send->fHEAD = 1; -} - -static void ch_set_state(struct smd_channel *ch, unsigned n) -{ - if (n == SMD_SS_OPENED) { - ch->send->fDSR = 1; - ch->send->fCTS = 1; - ch->send->fCD = 1; - } else { - ch->send->fDSR = 0; - ch->send->fCTS = 0; - ch->send->fCD = 0; - } - ch->send->state = n; - ch->send->fSTATE = 1; - ch->notify_other_cpu(); -} - -static void do_smd_probe(void) -{ - struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE; - if (shared->heap_info.free_offset != last_heap_free) { - last_heap_free = shared->heap_info.free_offset; - schedule_work(&probe_work); - } -} - -static void smd_state_change(struct smd_channel *ch, - unsigned last, unsigned next) -{ - ch->last_state = next; - - pr_debug("ch %d %d -> %d\n", ch->n, last, next); - - switch (next) { - case SMD_SS_OPENING: - ch->recv->tail = 0; - case SMD_SS_OPENED: - if (ch->send->state != SMD_SS_OPENED) - ch_set_state(ch, SMD_SS_OPENED); - ch->notify(ch->priv, SMD_EVENT_OPEN); - break; - case SMD_SS_FLUSHING: - case SMD_SS_RESET: - /* we should force them to close? */ - default: - ch->notify(ch->priv, SMD_EVENT_CLOSE); - } -} - -static void handle_smd_irq(struct list_head *list, void (*notify)(void)) -{ - unsigned long flags; - struct smd_channel *ch; - int do_notify = 0; - unsigned ch_flags; - unsigned tmp; - - spin_lock_irqsave(&smd_lock, flags); - list_for_each_entry(ch, list, ch_list) { - ch_flags = 0; - if (ch_is_open(ch)) { - if (ch->recv->fHEAD) { - ch->recv->fHEAD = 0; - ch_flags |= 1; - do_notify |= 1; - } - if (ch->recv->fTAIL) { - ch->recv->fTAIL = 0; - ch_flags |= 2; - do_notify |= 1; - } - if (ch->recv->fSTATE) { - ch->recv->fSTATE = 0; - ch_flags |= 4; - do_notify |= 1; - } - } - tmp = ch->recv->state; - if (tmp != ch->last_state) - smd_state_change(ch, ch->last_state, tmp); - if (ch_flags) { - ch->update_state(ch); - ch->notify(ch->priv, SMD_EVENT_DATA); - } - } - if (do_notify) - notify(); - spin_unlock_irqrestore(&smd_lock, flags); - do_smd_probe(); -} - -static irqreturn_t smd_modem_irq_handler(int irq, void *data) -{ - handle_smd_irq(&smd_ch_list_modem, notify_modem_smd); - return IRQ_HANDLED; -} - -#if defined(CONFIG_QDSP6) -static irqreturn_t smd_dsp_irq_handler(int irq, void *data) -{ - handle_smd_irq(&smd_ch_list_dsp, notify_dsp_smd); - return IRQ_HANDLED; -} -#endif - -static void smd_fake_irq_handler(unsigned long arg) -{ - handle_smd_irq(&smd_ch_list_modem, notify_modem_smd); - handle_smd_irq(&smd_ch_list_dsp, notify_dsp_smd); -} - -static DECLARE_TASKLET(smd_fake_irq_tasklet, smd_fake_irq_handler, 0); - -static inline int smd_need_int(struct smd_channel *ch) -{ - if (ch_is_open(ch)) { - if (ch->recv->fHEAD || ch->recv->fTAIL || ch->recv->fSTATE) - return 1; - if (ch->recv->state != ch->last_state) - return 1; - } - return 0; -} - -void smd_sleep_exit(void) -{ - unsigned long flags; - struct smd_channel *ch; - int need_int = 0; - - spin_lock_irqsave(&smd_lock, flags); - list_for_each_entry(ch, &smd_ch_list_modem, ch_list) { - if (smd_need_int(ch)) { - need_int = 1; - break; - } - } - list_for_each_entry(ch, &smd_ch_list_dsp, ch_list) { - if (smd_need_int(ch)) { - need_int = 1; - break; - } - } - spin_unlock_irqrestore(&smd_lock, flags); - do_smd_probe(); - - if (need_int) { - if (msm_smd_debug_mask & MSM_SMD_DEBUG) - pr_info("smd_sleep_exit need interrupt\n"); - tasklet_schedule(&smd_fake_irq_tasklet); - } -} - - -void smd_kick(smd_channel_t *ch) -{ - unsigned long flags; - unsigned tmp; - - spin_lock_irqsave(&smd_lock, flags); - ch->update_state(ch); - tmp = ch->recv->state; - if (tmp != ch->last_state) { - ch->last_state = tmp; - if (tmp == SMD_SS_OPENED) - ch->notify(ch->priv, SMD_EVENT_OPEN); - else - ch->notify(ch->priv, SMD_EVENT_CLOSE); - } - ch->notify(ch->priv, SMD_EVENT_DATA); - ch->notify_other_cpu(); - spin_unlock_irqrestore(&smd_lock, flags); -} - -static int smd_is_packet(int chn, unsigned type) -{ - type &= SMD_KIND_MASK; - if (type == SMD_KIND_PACKET) - return 1; - if (type == SMD_KIND_STREAM) - return 0; - - /* older AMSS reports SMD_KIND_UNKNOWN always */ - if ((chn > 4) || (chn == 1)) - return 1; - else - return 0; -} - -static int smd_stream_write(smd_channel_t *ch, const void *_data, int len) -{ - void *ptr; - const unsigned char *buf = _data; - unsigned xfer; - int orig_len = len; - - if (len < 0) - return -EINVAL; - - while ((xfer = ch_write_buffer(ch, &ptr)) != 0) { - if (!ch_is_open(ch)) - break; - if (xfer > len) - xfer = len; - memcpy(ptr, buf, xfer); - ch_write_done(ch, xfer); - len -= xfer; - buf += xfer; - if (len == 0) - break; - } - - ch->notify_other_cpu(); - - return orig_len - len; -} - -static int smd_packet_write(smd_channel_t *ch, const void *_data, int len) -{ - unsigned hdr[5]; - - if (len < 0) - return -EINVAL; - - if (smd_stream_write_avail(ch) < (len + SMD_HEADER_SIZE)) - return -ENOMEM; - - hdr[0] = len; - hdr[1] = hdr[2] = hdr[3] = hdr[4] = 0; - - smd_stream_write(ch, hdr, sizeof(hdr)); - smd_stream_write(ch, _data, len); - - return len; -} - -static int smd_stream_read(smd_channel_t *ch, void *data, int len) -{ - int r; - - if (len < 0) - return -EINVAL; - - r = ch_read(ch, data, len); - if (r > 0) - ch->notify_other_cpu(); - - return r; -} - -static int smd_packet_read(smd_channel_t *ch, void *data, int len) -{ - unsigned long flags; - int r; - - if (len < 0) - return -EINVAL; - - if (len > ch->current_packet) - len = ch->current_packet; - - r = ch_read(ch, data, len); - if (r > 0) - ch->notify_other_cpu(); - - spin_lock_irqsave(&smd_lock, flags); - ch->current_packet -= r; - update_packet_state(ch); - spin_unlock_irqrestore(&smd_lock, flags); - - return r; -} - -static int smd_alloc_channel(const char *name, uint32_t cid, uint32_t type) -{ - struct smd_channel *ch; - - ch = kzalloc(sizeof(struct smd_channel), GFP_KERNEL); - if (ch == 0) { - pr_err("smd_alloc_channel() out of memory\n"); - return -1; - } - ch->n = cid; - - if (_smd_alloc_channel(ch)) { - kfree(ch); - return -1; - } - - ch->fifo_mask = ch->fifo_size - 1; - ch->type = type; - - if ((type & SMD_TYPE_MASK) == SMD_TYPE_APPS_MODEM) - ch->notify_other_cpu = notify_modem_smd; - else - ch->notify_other_cpu = notify_dsp_smd; - - if (smd_is_packet(cid, type)) { - ch->read = smd_packet_read; - ch->write = smd_packet_write; - ch->read_avail = smd_packet_read_avail; - ch->write_avail = smd_packet_write_avail; - ch->update_state = update_packet_state; - } else { - ch->read = smd_stream_read; - ch->write = smd_stream_write; - ch->read_avail = smd_stream_read_avail; - ch->write_avail = smd_stream_write_avail; - ch->update_state = update_stream_state; - } - - if ((type & 0xff) == 0) - memcpy(ch->name, "SMD_", 4); - else - memcpy(ch->name, "DSP_", 4); - memcpy(ch->name + 4, name, 20); - ch->name[23] = 0; - ch->pdev.name = ch->name; - ch->pdev.id = -1; - - pr_debug("smd_alloc_channel() cid=%02d size=%05d '%s'\n", - ch->n, ch->fifo_size, ch->name); - - mutex_lock(&smd_creation_mutex); - list_add(&ch->ch_list, &smd_ch_closed_list); - mutex_unlock(&smd_creation_mutex); - - platform_device_register(&ch->pdev); - return 0; -} - -static void smd_channel_probe_worker(struct work_struct *work) -{ - struct smd_alloc_elm *shared; - unsigned ctype; - unsigned type; - unsigned n; - - shared = smem_find(ID_CH_ALLOC_TBL, sizeof(*shared) * 64); - if (!shared) { - pr_err("cannot find allocation table\n"); - return; - } - for (n = 0; n < 64; n++) { - if (smd_ch_allocated[n]) - continue; - if (!shared[n].ref_count) - continue; - if (!shared[n].name[0]) - continue; - ctype = shared[n].ctype; - type = ctype & SMD_TYPE_MASK; - - /* DAL channels are stream but neither the modem, - * nor the DSP correctly indicate this. Fixup manually. - */ - if (!memcmp(shared[n].name, "DAL", 3)) - ctype = (ctype & (~SMD_KIND_MASK)) | SMD_KIND_STREAM; - - type = shared[n].ctype & SMD_TYPE_MASK; - if ((type == SMD_TYPE_APPS_MODEM) || - (type == SMD_TYPE_APPS_DSP)) - if (!smd_alloc_channel(shared[n].name, shared[n].cid, ctype)) - smd_ch_allocated[n] = 1; - } -} - -static void do_nothing_notify(void *priv, unsigned flags) -{ -} - -struct smd_channel *smd_get_channel(const char *name) -{ - struct smd_channel *ch; - - mutex_lock(&smd_creation_mutex); - list_for_each_entry(ch, &smd_ch_closed_list, ch_list) { - if (!strcmp(name, ch->name)) { - list_del(&ch->ch_list); - mutex_unlock(&smd_creation_mutex); - return ch; - } - } - mutex_unlock(&smd_creation_mutex); - - return NULL; -} - -int smd_open(const char *name, smd_channel_t **_ch, - void *priv, void (*notify)(void *, unsigned)) -{ - struct smd_channel *ch; - unsigned long flags; - - if (smd_initialized == 0) { - pr_info("smd_open() before smd_init()\n"); - return -ENODEV; - } - - ch = smd_get_channel(name); - if (!ch) - return -ENODEV; - - if (notify == 0) - notify = do_nothing_notify; - - ch->notify = notify; - ch->current_packet = 0; - ch->last_state = SMD_SS_CLOSED; - ch->priv = priv; - - *_ch = ch; - - spin_lock_irqsave(&smd_lock, flags); - - if ((ch->type & SMD_TYPE_MASK) == SMD_TYPE_APPS_MODEM) - list_add(&ch->ch_list, &smd_ch_list_modem); - else - list_add(&ch->ch_list, &smd_ch_list_dsp); - - /* If the remote side is CLOSING, we need to get it to - * move to OPENING (which we'll do by moving from CLOSED to - * OPENING) and then get it to move from OPENING to - * OPENED (by doing the same state change ourselves). - * - * Otherwise, it should be OPENING and we can move directly - * to OPENED so that it will follow. - */ - if (ch->recv->state == SMD_SS_CLOSING) { - ch->send->head = 0; - ch_set_state(ch, SMD_SS_OPENING); - } else { - ch_set_state(ch, SMD_SS_OPENED); - } - spin_unlock_irqrestore(&smd_lock, flags); - smd_kick(ch); - - return 0; -} - -int smd_close(smd_channel_t *ch) -{ - unsigned long flags; - - if (ch == 0) - return -1; - - spin_lock_irqsave(&smd_lock, flags); - ch->notify = do_nothing_notify; - list_del(&ch->ch_list); - ch_set_state(ch, SMD_SS_CLOSED); - spin_unlock_irqrestore(&smd_lock, flags); - - mutex_lock(&smd_creation_mutex); - list_add(&ch->ch_list, &smd_ch_closed_list); - mutex_unlock(&smd_creation_mutex); - - return 0; -} - -int smd_read(smd_channel_t *ch, void *data, int len) -{ - return ch->read(ch, data, len); -} - -int smd_write(smd_channel_t *ch, const void *data, int len) -{ - return ch->write(ch, data, len); -} - -int smd_write_atomic(smd_channel_t *ch, const void *data, int len) -{ - unsigned long flags; - int res; - spin_lock_irqsave(&smd_lock, flags); - res = ch->write(ch, data, len); - spin_unlock_irqrestore(&smd_lock, flags); - return res; -} - -int smd_read_avail(smd_channel_t *ch) -{ - return ch->read_avail(ch); -} - -int smd_write_avail(smd_channel_t *ch) -{ - return ch->write_avail(ch); -} - -int smd_wait_until_readable(smd_channel_t *ch, int bytes) -{ - return -1; -} - -int smd_wait_until_writable(smd_channel_t *ch, int bytes) -{ - return -1; -} - -int smd_cur_packet_size(smd_channel_t *ch) -{ - return ch->current_packet; -} - - -/* ------------------------------------------------------------------------- */ - -void *smem_alloc(unsigned id, unsigned size) -{ - return smem_find(id, size); -} - -void __iomem *smem_item(unsigned id, unsigned *size) -{ - struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE; - struct smem_heap_entry *toc = shared->heap_toc; - - if (id >= SMEM_NUM_ITEMS) - return NULL; - - if (toc[id].allocated) { - *size = toc[id].size; - return (MSM_SHARED_RAM_BASE + toc[id].offset); - } else { - *size = 0; - } - - return NULL; -} - -void *smem_find(unsigned id, unsigned size_in) -{ - unsigned size; - void *ptr; - - ptr = smem_item(id, &size); - if (!ptr) - return 0; - - size_in = ALIGN(size_in, 8); - if (size_in != size) { - pr_err("smem_find(%d, %d): wrong size %d\n", - id, size_in, size); - return 0; - } - - return ptr; -} - -static irqreturn_t smsm_irq_handler(int irq, void *data) -{ - unsigned long flags; - unsigned apps, modm; - - spin_lock_irqsave(&smem_lock, flags); - - apps = raw_smsm_get_state(SMSM_STATE_APPS); - modm = raw_smsm_get_state(SMSM_STATE_MODEM); - - if (msm_smd_debug_mask & MSM_SMSM_DEBUG) - pr_info("<SM %08x %08x>\n", apps, modm); - if (modm & SMSM_RESET) - handle_modem_crash(); - - do_smd_probe(); - - spin_unlock_irqrestore(&smem_lock, flags); - return IRQ_HANDLED; -} - -int smsm_change_state(enum smsm_state_item item, - uint32_t clear_mask, uint32_t set_mask) -{ - void __iomem *addr = smd_info.state + item * 4; - unsigned long flags; - unsigned state; - - if (!smd_info.ready) - return -EIO; - - spin_lock_irqsave(&smem_lock, flags); - - if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET) - handle_modem_crash(); - - state = (readl(addr) & ~clear_mask) | set_mask; - writel(state, addr); - - if (msm_smd_debug_mask & MSM_SMSM_DEBUG) - pr_info("smsm_change_state %d %x\n", item, state); - notify_other_smsm(); - - spin_unlock_irqrestore(&smem_lock, flags); - - return 0; -} - -uint32_t smsm_get_state(enum smsm_state_item item) -{ - unsigned long flags; - uint32_t rv; - - spin_lock_irqsave(&smem_lock, flags); - - rv = readl(smd_info.state + item * 4); - - if (item == SMSM_STATE_MODEM && (rv & SMSM_RESET)) - handle_modem_crash(); - - spin_unlock_irqrestore(&smem_lock, flags); - - return rv; -} - -#ifdef CONFIG_ARCH_MSM_SCORPION - -int smsm_set_sleep_duration(uint32_t delay) -{ - struct msm_dem_slave_data *ptr; - - ptr = smem_find(SMEM_APPS_DEM_SLAVE_DATA, sizeof(*ptr)); - if (ptr == NULL) { - pr_err("smsm_set_sleep_duration <SM NO APPS_DEM_SLAVE_DATA>\n"); - return -EIO; - } - if (msm_smd_debug_mask & MSM_SMSM_DEBUG) - pr_info("smsm_set_sleep_duration %d -> %d\n", - ptr->sleep_time, delay); - ptr->sleep_time = delay; - return 0; -} - -#else - -int smsm_set_sleep_duration(uint32_t delay) -{ - uint32_t *ptr; - - ptr = smem_find(SMEM_SMSM_SLEEP_DELAY, sizeof(*ptr)); - if (ptr == NULL) { - pr_err("smsm_set_sleep_duration <SM NO SLEEP_DELAY>\n"); - return -EIO; - } - if (msm_smd_debug_mask & MSM_SMSM_DEBUG) - pr_info("smsm_set_sleep_duration %d -> %d\n", - *ptr, delay); - *ptr = delay; - return 0; -} - -#endif - -int smd_core_init(void) -{ - int r; - - /* wait for essential items to be initialized */ - for (;;) { - unsigned size; - void __iomem *state; - state = smem_item(SMEM_SMSM_SHARED_STATE, &size); - if (size == SMSM_V1_SIZE || size == SMSM_V2_SIZE) { - smd_info.state = state; - break; - } - } - - smd_info.ready = 1; - - r = request_irq(INT_A9_M2A_0, smd_modem_irq_handler, - IRQF_TRIGGER_RISING, "smd_dev", 0); - if (r < 0) - return r; - r = enable_irq_wake(INT_A9_M2A_0); - if (r < 0) - pr_err("smd_core_init: enable_irq_wake failed for A9_M2A_0\n"); - - r = request_irq(INT_A9_M2A_5, smsm_irq_handler, - IRQF_TRIGGER_RISING, "smsm_dev", 0); - if (r < 0) { - free_irq(INT_A9_M2A_0, 0); - return r; - } - r = enable_irq_wake(INT_A9_M2A_5); - if (r < 0) - pr_err("smd_core_init: enable_irq_wake failed for A9_M2A_5\n"); - -#if defined(CONFIG_QDSP6) - r = request_irq(INT_ADSP_A11, smd_dsp_irq_handler, - IRQF_TRIGGER_RISING, "smd_dsp", 0); - if (r < 0) { - free_irq(INT_A9_M2A_0, 0); - free_irq(INT_A9_M2A_5, 0); - return r; - } -#endif - - /* check for any SMD channels that may already exist */ - do_smd_probe(); - - /* indicate that we're up and running */ - smsm_change_state(SMSM_STATE_APPS, - ~0, SMSM_INIT | SMSM_SMDINIT | SMSM_RPCINIT | SMSM_RUN); -#ifdef CONFIG_ARCH_MSM_SCORPION - smsm_change_state(SMSM_STATE_APPS_DEM, ~0, 0); -#endif - - return 0; -} - -static int msm_smd_probe(struct platform_device *pdev) -{ - /* - * If we haven't waited for the ARM9 to boot up till now, - * then we need to wait here. Otherwise this should just - * return immediately. - */ - proc_comm_boot_wait(); - - INIT_WORK(&probe_work, smd_channel_probe_worker); - - if (smd_core_init()) { - pr_err("smd_core_init() failed\n"); - return -1; - } - - do_smd_probe(); - - msm_check_for_modem_crash = check_for_modem_crash; - - msm_init_last_radio_log(THIS_MODULE); - - smd_initialized = 1; - - return 0; -} - -static struct platform_driver msm_smd_driver = { - .probe = msm_smd_probe, - .driver = { - .name = MODULE_NAME, - }, -}; - -static int __init msm_smd_init(void) -{ - return platform_driver_register(&msm_smd_driver); -} - -module_init(msm_smd_init); - -MODULE_DESCRIPTION("MSM Shared Memory Core"); -MODULE_AUTHOR("Brian Swetland <swetland@google.com>"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-msm/smd_debug.c b/arch/arm/mach-msm/smd_debug.c deleted file mode 100644 index 8056b3e5590f..000000000000 --- a/arch/arm/mach-msm/smd_debug.c +++ /dev/null @@ -1,311 +0,0 @@ -/* arch/arm/mach-msm/smd_debug.c - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/debugfs.h> -#include <linux/list.h> - -#include <mach/msm_iomap.h> - -#include "smd_private.h" - -#if defined(CONFIG_DEBUG_FS) - -static char *chstate(unsigned n) -{ - switch (n) { - case SMD_SS_CLOSED: - return "CLOSED"; - case SMD_SS_OPENING: - return "OPENING"; - case SMD_SS_OPENED: - return "OPENED"; - case SMD_SS_FLUSHING: - return "FLUSHING"; - case SMD_SS_CLOSING: - return "CLOSING"; - case SMD_SS_RESET: - return "RESET"; - case SMD_SS_RESET_OPENING: - return "ROPENING"; - default: - return "UNKNOWN"; - } -} - - -static int dump_ch(char *buf, int max, struct smd_channel *ch) -{ - volatile struct smd_half_channel *s = ch->send; - volatile struct smd_half_channel *r = ch->recv; - - return scnprintf( - buf, max, - "ch%02d:" - " %8s(%05d/%05d) %c%c%c%c%c%c%c <->" - " %8s(%05d/%05d) %c%c%c%c%c%c%c '%s'\n", ch->n, - chstate(s->state), s->tail, s->head, - s->fDSR ? 'D' : 'd', - s->fCTS ? 'C' : 'c', - s->fCD ? 'C' : 'c', - s->fRI ? 'I' : 'i', - s->fHEAD ? 'W' : 'w', - s->fTAIL ? 'R' : 'r', - s->fSTATE ? 'S' : 's', - chstate(r->state), r->tail, r->head, - r->fDSR ? 'D' : 'd', - r->fCTS ? 'R' : 'r', - r->fCD ? 'C' : 'c', - r->fRI ? 'I' : 'i', - r->fHEAD ? 'W' : 'w', - r->fTAIL ? 'R' : 'r', - r->fSTATE ? 'S' : 's', - ch->name - ); -} - -static int debug_read_stat(char *buf, int max) -{ - char *msg; - int i = 0; - - msg = smem_find(ID_DIAG_ERR_MSG, SZ_DIAG_ERR_MSG); - - if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET) - i += scnprintf(buf + i, max - i, - "smsm: ARM9 HAS CRASHED\n"); - - i += scnprintf(buf + i, max - i, "smsm: a9: %08x a11: %08x\n", - raw_smsm_get_state(SMSM_STATE_MODEM), - raw_smsm_get_state(SMSM_STATE_APPS)); -#ifdef CONFIG_ARCH_MSM_SCORPION - i += scnprintf(buf + i, max - i, "smsm dem: apps: %08x modem: %08x " - "qdsp6: %08x power: %08x time: %08x\n", - raw_smsm_get_state(SMSM_STATE_APPS_DEM), - raw_smsm_get_state(SMSM_STATE_MODEM_DEM), - raw_smsm_get_state(SMSM_STATE_QDSP6_DEM), - raw_smsm_get_state(SMSM_STATE_POWER_MASTER_DEM), - raw_smsm_get_state(SMSM_STATE_TIME_MASTER_DEM)); -#endif - if (msg) { - msg[SZ_DIAG_ERR_MSG - 1] = 0; - i += scnprintf(buf + i, max - i, "diag: '%s'\n", msg); - } - return i; -} - -static int debug_read_mem(char *buf, int max) -{ - unsigned n; - struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE; - struct smem_heap_entry *toc = shared->heap_toc; - int i = 0; - - i += scnprintf(buf + i, max - i, - "heap: init=%d free=%d remain=%d\n", - shared->heap_info.initialized, - shared->heap_info.free_offset, - shared->heap_info.heap_remaining); - - for (n = 0; n < SMEM_NUM_ITEMS; n++) { - if (toc[n].allocated == 0) - continue; - i += scnprintf(buf + i, max - i, - "%04d: offset %08x size %08x\n", - n, toc[n].offset, toc[n].size); - } - return i; -} - -static int debug_read_ch(char *buf, int max) -{ - struct smd_channel *ch; - unsigned long flags; - int i = 0; - - spin_lock_irqsave(&smd_lock, flags); - list_for_each_entry(ch, &smd_ch_list_dsp, ch_list) - i += dump_ch(buf + i, max - i, ch); - list_for_each_entry(ch, &smd_ch_list_modem, ch_list) - i += dump_ch(buf + i, max - i, ch); - list_for_each_entry(ch, &smd_ch_closed_list, ch_list) - i += dump_ch(buf + i, max - i, ch); - spin_unlock_irqrestore(&smd_lock, flags); - - return i; -} - -static int debug_read_version(char *buf, int max) -{ - struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE; - unsigned version = shared->version[VERSION_MODEM]; - return sprintf(buf, "%d.%d\n", version >> 16, version & 0xffff); -} - -static int debug_read_build_id(char *buf, int max) -{ - unsigned size; - void *data; - - data = smem_item(SMEM_HW_SW_BUILD_ID, &size); - if (!data) - return 0; - - if (size >= max) - size = max; - memcpy(buf, data, size); - - return size; -} - -static int debug_read_alloc_tbl(char *buf, int max) -{ - struct smd_alloc_elm *shared; - int n, i = 0; - - shared = smem_find(ID_CH_ALLOC_TBL, sizeof(*shared) * 64); - - for (n = 0; n < 64; n++) { - if (shared[n].ref_count == 0) - continue; - i += scnprintf(buf + i, max - i, - "%03d: %-20s cid=%02d type=%03d " - "kind=%02d ref_count=%d\n", - n, shared[n].name, shared[n].cid, - shared[n].ctype & 0xff, - (shared[n].ctype >> 8) & 0xf, - shared[n].ref_count); - } - - return i; -} - -#define DEBUG_BUFMAX 4096 -static char debug_buffer[DEBUG_BUFMAX]; - -static ssize_t debug_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos) -{ - int (*fill)(char *buf, int max) = file->private_data; - int bsize = fill(debug_buffer, DEBUG_BUFMAX); - return simple_read_from_buffer(buf, count, ppos, debug_buffer, bsize); -} - -static const struct file_operations debug_ops = { - .read = debug_read, - .open = simple_open, - .llseek = default_llseek, -}; - -static void debug_create(const char *name, umode_t mode, - struct dentry *dent, - int (*fill)(char *buf, int max)) -{ - debugfs_create_file(name, mode, dent, fill, &debug_ops); -} - -int __init smd_debugfs_init(void) -{ - struct dentry *dent; - - dent = debugfs_create_dir("smd", 0); - if (IS_ERR(dent)) - return 1; - - debug_create("ch", 0444, dent, debug_read_ch); - debug_create("stat", 0444, dent, debug_read_stat); - debug_create("mem", 0444, dent, debug_read_mem); - debug_create("version", 0444, dent, debug_read_version); - debug_create("tbl", 0444, dent, debug_read_alloc_tbl); - debug_create("build", 0444, dent, debug_read_build_id); - - return 0; -} - -#endif - - -#define MAX_NUM_SLEEP_CLIENTS 64 -#define MAX_SLEEP_NAME_LEN 8 - -#define NUM_GPIO_INT_REGISTERS 6 -#define GPIO_SMEM_NUM_GROUPS 2 -#define GPIO_SMEM_MAX_PC_INTERRUPTS 8 - -struct tramp_gpio_save { - unsigned int enable; - unsigned int detect; - unsigned int polarity; -}; - -struct tramp_gpio_smem { - uint16_t num_fired[GPIO_SMEM_NUM_GROUPS]; - uint16_t fired[GPIO_SMEM_NUM_GROUPS][GPIO_SMEM_MAX_PC_INTERRUPTS]; - uint32_t enabled[NUM_GPIO_INT_REGISTERS]; - uint32_t detection[NUM_GPIO_INT_REGISTERS]; - uint32_t polarity[NUM_GPIO_INT_REGISTERS]; -}; - - -void smsm_print_sleep_info(void) -{ - unsigned long flags; - uint32_t *ptr; -#ifndef CONFIG_ARCH_MSM_SCORPION - struct tramp_gpio_smem *gpio; - struct smsm_interrupt_info *int_info; -#endif - - - spin_lock_irqsave(&smem_lock, flags); - - ptr = smem_alloc(SMEM_SMSM_SLEEP_DELAY, sizeof(*ptr)); - if (ptr) - pr_info("SMEM_SMSM_SLEEP_DELAY: %x\n", *ptr); - - ptr = smem_alloc(SMEM_SMSM_LIMIT_SLEEP, sizeof(*ptr)); - if (ptr) - pr_info("SMEM_SMSM_LIMIT_SLEEP: %x\n", *ptr); - - ptr = smem_alloc(SMEM_SLEEP_POWER_COLLAPSE_DISABLED, sizeof(*ptr)); - if (ptr) - pr_info("SMEM_SLEEP_POWER_COLLAPSE_DISABLED: %x\n", *ptr); - -#ifndef CONFIG_ARCH_MSM_SCORPION - int_info = smem_alloc(SMEM_SMSM_INT_INFO, sizeof(*int_info)); - if (int_info) - pr_info("SMEM_SMSM_INT_INFO %x %x %x\n", - int_info->interrupt_mask, - int_info->pending_interrupts, - int_info->wakeup_reason); - - gpio = smem_alloc(SMEM_GPIO_INT, sizeof(*gpio)); - if (gpio) { - int i; - for (i = 0; i < NUM_GPIO_INT_REGISTERS; i++) - pr_info("SMEM_GPIO_INT: %d: e %x d %x p %x\n", - i, gpio->enabled[i], gpio->detection[i], - gpio->polarity[i]); - - for (i = 0; i < GPIO_SMEM_NUM_GROUPS; i++) - pr_info("SMEM_GPIO_INT: %d: f %d: %d %d...\n", - i, gpio->num_fired[i], gpio->fired[i][0], - gpio->fired[i][1]); - } -#else -#endif - spin_unlock_irqrestore(&smem_lock, flags); -} - diff --git a/arch/arm/mach-msm/smd_private.h b/arch/arm/mach-msm/smd_private.h deleted file mode 100644 index 727bfe68aa9b..000000000000 --- a/arch/arm/mach-msm/smd_private.h +++ /dev/null @@ -1,403 +0,0 @@ -/* arch/arm/mach-msm/smd_private.h - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007 QUALCOMM Incorporated - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#ifndef _ARCH_ARM_MACH_MSM_MSM_SMD_PRIVATE_H_ -#define _ARCH_ARM_MACH_MSM_MSM_SMD_PRIVATE_H_ - -#include <linux/platform_device.h> -#include <linux/spinlock.h> -#include <linux/list.h> -#include <linux/io.h> - -#include <mach/msm_iomap.h> - -struct smem_heap_info { - unsigned initialized; - unsigned free_offset; - unsigned heap_remaining; - unsigned reserved; -}; - -struct smem_heap_entry { - unsigned allocated; - unsigned offset; - unsigned size; - unsigned reserved; -}; - -struct smem_proc_comm { - unsigned command; - unsigned status; - unsigned data1; - unsigned data2; -}; - -#define PC_APPS 0 -#define PC_MODEM 1 - -#define VERSION_SMD 0 -#define VERSION_QDSP6 4 -#define VERSION_APPS_SBL 6 -#define VERSION_MODEM_SBL 7 -#define VERSION_APPS 8 -#define VERSION_MODEM 9 - -struct smem_shared { - struct smem_proc_comm proc_comm[4]; - unsigned version[32]; - struct smem_heap_info heap_info; - struct smem_heap_entry heap_toc[512]; -}; - -#define SMSM_V1_SIZE (sizeof(unsigned) * 8) -#define SMSM_V2_SIZE (sizeof(unsigned) * 4) - -#ifdef CONFIG_MSM_SMD_PKG3 -struct smsm_interrupt_info { - uint32_t interrupt_mask; - uint32_t pending_interrupts; - uint32_t wakeup_reason; -}; -#else -#define DEM_MAX_PORT_NAME_LEN (20) -struct msm_dem_slave_data { - uint32_t sleep_time; - uint32_t interrupt_mask; - uint32_t resources_used; - uint32_t reserved1; - - uint32_t wakeup_reason; - uint32_t pending_interrupts; - uint32_t rpc_prog; - uint32_t rpc_proc; - char smd_port_name[DEM_MAX_PORT_NAME_LEN]; - uint32_t reserved2; -}; -#endif - -#define SZ_DIAG_ERR_MSG 0xC8 -#define ID_DIAG_ERR_MSG SMEM_DIAG_ERR_MESSAGE -#define ID_SMD_CHANNELS SMEM_SMD_BASE_ID -#define ID_SHARED_STATE SMEM_SMSM_SHARED_STATE -#define ID_CH_ALLOC_TBL SMEM_CHANNEL_ALLOC_TBL - -#define SMSM_INIT 0x00000001 -#define SMSM_SMDINIT 0x00000008 -#define SMSM_RPCINIT 0x00000020 -#define SMSM_RESET 0x00000040 -#define SMSM_RSA 0x00000080 -#define SMSM_RUN 0x00000100 -#define SMSM_PWRC 0x00000200 -#define SMSM_TIMEWAIT 0x00000400 -#define SMSM_TIMEINIT 0x00000800 -#define SMSM_PWRC_EARLY_EXIT 0x00001000 -#define SMSM_WFPI 0x00002000 -#define SMSM_SLEEP 0x00004000 -#define SMSM_SLEEPEXIT 0x00008000 -#define SMSM_APPS_REBOOT 0x00020000 -#define SMSM_SYSTEM_POWER_DOWN 0x00040000 -#define SMSM_SYSTEM_REBOOT 0x00080000 -#define SMSM_SYSTEM_DOWNLOAD 0x00100000 -#define SMSM_PWRC_SUSPEND 0x00200000 -#define SMSM_APPS_SHUTDOWN 0x00400000 -#define SMSM_SMD_LOOPBACK 0x00800000 -#define SMSM_RUN_QUIET 0x01000000 -#define SMSM_MODEM_WAIT 0x02000000 -#define SMSM_MODEM_BREAK 0x04000000 -#define SMSM_MODEM_CONTINUE 0x08000000 -#define SMSM_UNKNOWN 0x80000000 - -#define SMSM_WKUP_REASON_RPC 0x00000001 -#define SMSM_WKUP_REASON_INT 0x00000002 -#define SMSM_WKUP_REASON_GPIO 0x00000004 -#define SMSM_WKUP_REASON_TIMER 0x00000008 -#define SMSM_WKUP_REASON_ALARM 0x00000010 -#define SMSM_WKUP_REASON_RESET 0x00000020 - -#ifdef CONFIG_ARCH_MSM7X00A -enum smsm_state_item { - SMSM_STATE_APPS = 1, - SMSM_STATE_MODEM = 3, - SMSM_STATE_COUNT, -}; -#else -enum smsm_state_item { - SMSM_STATE_APPS, - SMSM_STATE_MODEM, - SMSM_STATE_HEXAGON, - SMSM_STATE_APPS_DEM, - SMSM_STATE_MODEM_DEM, - SMSM_STATE_QDSP6_DEM, - SMSM_STATE_POWER_MASTER_DEM, - SMSM_STATE_TIME_MASTER_DEM, - SMSM_STATE_COUNT, -}; -#endif - -void *smem_alloc(unsigned id, unsigned size); -int smsm_change_state(enum smsm_state_item item, uint32_t clear_mask, uint32_t set_mask); -uint32_t smsm_get_state(enum smsm_state_item item); -int smsm_set_sleep_duration(uint32_t delay); -void smsm_print_sleep_info(void); - -#define SMEM_NUM_SMD_CHANNELS 64 - -typedef enum { - /* fixed items */ - SMEM_PROC_COMM = 0, - SMEM_HEAP_INFO, - SMEM_ALLOCATION_TABLE, - SMEM_VERSION_INFO, - SMEM_HW_RESET_DETECT, - SMEM_AARM_WARM_BOOT, - SMEM_DIAG_ERR_MESSAGE, - SMEM_SPINLOCK_ARRAY, - SMEM_MEMORY_BARRIER_LOCATION, - - /* dynamic items */ - SMEM_AARM_PARTITION_TABLE, - SMEM_AARM_BAD_BLOCK_TABLE, - SMEM_RESERVE_BAD_BLOCKS, - SMEM_WM_UUID, - SMEM_CHANNEL_ALLOC_TBL, - SMEM_SMD_BASE_ID, - SMEM_SMEM_LOG_IDX = SMEM_SMD_BASE_ID + SMEM_NUM_SMD_CHANNELS, - SMEM_SMEM_LOG_EVENTS, - SMEM_SMEM_STATIC_LOG_IDX, - SMEM_SMEM_STATIC_LOG_EVENTS, - SMEM_SMEM_SLOW_CLOCK_SYNC, - SMEM_SMEM_SLOW_CLOCK_VALUE, - SMEM_BIO_LED_BUF, - SMEM_SMSM_SHARED_STATE, - SMEM_SMSM_INT_INFO, - SMEM_SMSM_SLEEP_DELAY, - SMEM_SMSM_LIMIT_SLEEP, - SMEM_SLEEP_POWER_COLLAPSE_DISABLED, - SMEM_KEYPAD_KEYS_PRESSED, - SMEM_KEYPAD_STATE_UPDATED, - SMEM_KEYPAD_STATE_IDX, - SMEM_GPIO_INT, - SMEM_MDDI_LCD_IDX, - SMEM_MDDI_HOST_DRIVER_STATE, - SMEM_MDDI_LCD_DISP_STATE, - SMEM_LCD_CUR_PANEL, - SMEM_MARM_BOOT_SEGMENT_INFO, - SMEM_AARM_BOOT_SEGMENT_INFO, - SMEM_SLEEP_STATIC, - SMEM_SCORPION_FREQUENCY, - SMEM_SMD_PROFILES, - SMEM_TSSC_BUSY, - SMEM_HS_SUSPEND_FILTER_INFO, - SMEM_BATT_INFO, - SMEM_APPS_BOOT_MODE, - SMEM_VERSION_FIRST, - SMEM_VERSION_LAST = SMEM_VERSION_FIRST + 24, - SMEM_OSS_RRCASN1_BUF1, - SMEM_OSS_RRCASN1_BUF2, - SMEM_ID_VENDOR0, - SMEM_ID_VENDOR1, - SMEM_ID_VENDOR2, - SMEM_HW_SW_BUILD_ID, - SMEM_SMD_BLOCK_PORT_BASE_ID, - SMEM_SMD_BLOCK_PORT_PROC0_HEAP = SMEM_SMD_BLOCK_PORT_BASE_ID + SMEM_NUM_SMD_CHANNELS, - SMEM_SMD_BLOCK_PORT_PROC1_HEAP = SMEM_SMD_BLOCK_PORT_PROC0_HEAP + SMEM_NUM_SMD_CHANNELS, - SMEM_I2C_MUTEX = SMEM_SMD_BLOCK_PORT_PROC1_HEAP + SMEM_NUM_SMD_CHANNELS, - SMEM_SCLK_CONVERSION, - SMEM_SMD_SMSM_INTR_MUX, - SMEM_SMSM_CPU_INTR_MASK, - SMEM_APPS_DEM_SLAVE_DATA, - SMEM_QDSP6_DEM_SLAVE_DATA, - SMEM_CLKREGIM_BSP, - SMEM_CLKREGIM_SOURCES, - SMEM_SMD_FIFO_BASE_ID, - SMEM_USABLE_RAM_PARTITION_TABLE = SMEM_SMD_FIFO_BASE_ID + SMEM_NUM_SMD_CHANNELS, - SMEM_POWER_ON_STATUS_INFO, - SMEM_DAL_AREA, - SMEM_SMEM_LOG_POWER_IDX, - SMEM_SMEM_LOG_POWER_WRAP, - SMEM_SMEM_LOG_POWER_EVENTS, - SMEM_ERR_CRASH_LOG, - SMEM_ERR_F3_TRACE_LOG, - SMEM_NUM_ITEMS, -} smem_mem_type; - - -#define SMD_SS_CLOSED 0x00000000 -#define SMD_SS_OPENING 0x00000001 -#define SMD_SS_OPENED 0x00000002 -#define SMD_SS_FLUSHING 0x00000003 -#define SMD_SS_CLOSING 0x00000004 -#define SMD_SS_RESET 0x00000005 -#define SMD_SS_RESET_OPENING 0x00000006 - -#define SMD_BUF_SIZE 8192 -#define SMD_CHANNELS 64 - -#define SMD_HEADER_SIZE 20 - -struct smd_alloc_elm { - char name[20]; - uint32_t cid; - uint32_t ctype; - uint32_t ref_count; -}; - -struct smd_half_channel { - unsigned state; - unsigned char fDSR; - unsigned char fCTS; - unsigned char fCD; - unsigned char fRI; - unsigned char fHEAD; - unsigned char fTAIL; - unsigned char fSTATE; - unsigned char fUNUSED; - unsigned tail; - unsigned head; -} __attribute__(( aligned(4), packed )); - -/* Only used on SMD package v3 on msm7201a */ -struct smd_shared_v1 { - struct smd_half_channel ch0; - unsigned char data0[SMD_BUF_SIZE]; - struct smd_half_channel ch1; - unsigned char data1[SMD_BUF_SIZE]; -}; - -/* Used on SMD package v4 */ -struct smd_shared_v2 { - struct smd_half_channel ch0; - struct smd_half_channel ch1; -}; - -struct smd_channel { - volatile struct smd_half_channel *send; - volatile struct smd_half_channel *recv; - unsigned char *send_data; - unsigned char *recv_data; - - unsigned fifo_mask; - unsigned fifo_size; - unsigned current_packet; - unsigned n; - - struct list_head ch_list; - - void *priv; - void (*notify)(void *priv, unsigned flags); - - int (*read)(struct smd_channel *ch, void *data, int len); - int (*write)(struct smd_channel *ch, const void *data, int len); - int (*read_avail)(struct smd_channel *ch); - int (*write_avail)(struct smd_channel *ch); - - void (*update_state)(struct smd_channel *ch); - unsigned last_state; - void (*notify_other_cpu)(void); - unsigned type; - - char name[32]; - struct platform_device pdev; -}; - -#define SMD_TYPE_MASK 0x0FF -#define SMD_TYPE_APPS_MODEM 0x000 -#define SMD_TYPE_APPS_DSP 0x001 -#define SMD_TYPE_MODEM_DSP 0x002 - -#define SMD_KIND_MASK 0xF00 -#define SMD_KIND_UNKNOWN 0x000 -#define SMD_KIND_STREAM 0x100 -#define SMD_KIND_PACKET 0x200 - -extern struct list_head smd_ch_closed_list; -extern struct list_head smd_ch_list_modem; -extern struct list_head smd_ch_list_dsp; - -extern spinlock_t smd_lock; -extern spinlock_t smem_lock; - -void *smem_find(unsigned id, unsigned size); -void *smem_item(unsigned id, unsigned *size); -uint32_t raw_smsm_get_state(enum smsm_state_item item); - -extern void msm_init_last_radio_log(struct module *); - -#ifdef CONFIG_MSM_SMD_PKG3 -/* - * This allocator assumes an SMD Package v3 which only exists on - * MSM7x00 SoC's. - */ -static inline int _smd_alloc_channel(struct smd_channel *ch) -{ - struct smd_shared_v1 *shared1; - - shared1 = smem_alloc(ID_SMD_CHANNELS + ch->n, sizeof(*shared1)); - if (!shared1) { - pr_err("smd_alloc_channel() cid %d does not exist\n", ch->n); - return -1; - } - ch->send = &shared1->ch0; - ch->recv = &shared1->ch1; - ch->send_data = shared1->data0; - ch->recv_data = shared1->data1; - ch->fifo_size = SMD_BUF_SIZE; - return 0; -} -#else -/* - * This allocator assumes an SMD Package v4, the most common - * and the default. - */ -static inline int _smd_alloc_channel(struct smd_channel *ch) -{ - struct smd_shared_v2 *shared2; - void *buffer; - unsigned buffer_sz; - - shared2 = smem_alloc(SMEM_SMD_BASE_ID + ch->n, sizeof(*shared2)); - buffer = smem_item(SMEM_SMD_FIFO_BASE_ID + ch->n, &buffer_sz); - - if (!buffer) - return -1; - - /* buffer must be a power-of-two size */ - if (buffer_sz & (buffer_sz - 1)) - return -1; - - buffer_sz /= 2; - ch->send = &shared2->ch0; - ch->recv = &shared2->ch1; - ch->send_data = buffer; - ch->recv_data = buffer + buffer_sz; - ch->fifo_size = buffer_sz; - return 0; -} -#endif /* CONFIG_MSM_SMD_PKG3 */ - -#if defined(CONFIG_ARCH_MSM7X30) -static inline void msm_a2m_int(uint32_t irq) -{ - writel(1 << irq, MSM_GCC_BASE + 0x8); -} -#else -static inline void msm_a2m_int(uint32_t irq) -{ - writel(1, MSM_CSR_BASE + 0x400 + (irq * 4)); -} -#endif /* CONFIG_ARCH_MSM7X30 */ - - -#endif diff --git a/arch/arm/mach-msm/vreg.c b/arch/arm/mach-msm/vreg.c deleted file mode 100644 index bd66ed04d6dc..000000000000 --- a/arch/arm/mach-msm/vreg.c +++ /dev/null @@ -1,220 +0,0 @@ -/* arch/arm/mach-msm/vreg.c - * - * Copyright (C) 2008 Google, Inc. - * Copyright (c) 2009, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/init.h> -#include <linux/debugfs.h> -#include <linux/module.h> -#include <linux/string.h> -#include <mach/vreg.h> - -#include "proc_comm.h" - -struct vreg { - const char *name; - unsigned id; - int status; - unsigned refcnt; -}; - -#define VREG(_name, _id, _status, _refcnt) \ - { .name = _name, .id = _id, .status = _status, .refcnt = _refcnt } - -static struct vreg vregs[] = { - VREG("msma", 0, 0, 0), - VREG("msmp", 1, 0, 0), - VREG("msme1", 2, 0, 0), - VREG("msmc1", 3, 0, 0), - VREG("msmc2", 4, 0, 0), - VREG("gp3", 5, 0, 0), - VREG("msme2", 6, 0, 0), - VREG("gp4", 7, 0, 0), - VREG("gp1", 8, 0, 0), - VREG("tcxo", 9, 0, 0), - VREG("pa", 10, 0, 0), - VREG("rftx", 11, 0, 0), - VREG("rfrx1", 12, 0, 0), - VREG("rfrx2", 13, 0, 0), - VREG("synt", 14, 0, 0), - VREG("wlan", 15, 0, 0), - VREG("usb", 16, 0, 0), - VREG("boost", 17, 0, 0), - VREG("mmc", 18, 0, 0), - VREG("ruim", 19, 0, 0), - VREG("msmc0", 20, 0, 0), - VREG("gp2", 21, 0, 0), - VREG("gp5", 22, 0, 0), - VREG("gp6", 23, 0, 0), - VREG("rf", 24, 0, 0), - VREG("rf_vco", 26, 0, 0), - VREG("mpll", 27, 0, 0), - VREG("s2", 28, 0, 0), - VREG("s3", 29, 0, 0), - VREG("rfubm", 30, 0, 0), - VREG("ncp", 31, 0, 0), - VREG("gp7", 32, 0, 0), - VREG("gp8", 33, 0, 0), - VREG("gp9", 34, 0, 0), - VREG("gp10", 35, 0, 0), - VREG("gp11", 36, 0, 0), - VREG("gp12", 37, 0, 0), - VREG("gp13", 38, 0, 0), - VREG("gp14", 39, 0, 0), - VREG("gp15", 40, 0, 0), - VREG("gp16", 41, 0, 0), - VREG("gp17", 42, 0, 0), - VREG("s4", 43, 0, 0), - VREG("usb2", 44, 0, 0), - VREG("wlan2", 45, 0, 0), - VREG("xo_out", 46, 0, 0), - VREG("lvsw0", 47, 0, 0), - VREG("lvsw1", 48, 0, 0), -}; - -struct vreg *vreg_get(struct device *dev, const char *id) -{ - int n; - for (n = 0; n < ARRAY_SIZE(vregs); n++) { - if (!strcmp(vregs[n].name, id)) - return vregs + n; - } - return ERR_PTR(-ENOENT); -} - -void vreg_put(struct vreg *vreg) -{ -} - -int vreg_enable(struct vreg *vreg) -{ - unsigned id = vreg->id; - unsigned enable = 1; - - if (vreg->refcnt == 0) - vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable); - - if ((vreg->refcnt < UINT_MAX) && (!vreg->status)) - vreg->refcnt++; - - return vreg->status; -} - -int vreg_disable(struct vreg *vreg) -{ - unsigned id = vreg->id; - unsigned enable = 0; - - if (!vreg->refcnt) - return 0; - - if (vreg->refcnt == 1) - vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable); - - if (!vreg->status) - vreg->refcnt--; - - return vreg->status; -} - -int vreg_set_level(struct vreg *vreg, unsigned mv) -{ - unsigned id = vreg->id; - - vreg->status = msm_proc_comm(PCOM_VREG_SET_LEVEL, &id, &mv); - return vreg->status; -} - -#if defined(CONFIG_DEBUG_FS) - -static int vreg_debug_set(void *data, u64 val) -{ - struct vreg *vreg = data; - switch (val) { - case 0: - vreg_disable(vreg); - break; - case 1: - vreg_enable(vreg); - break; - default: - vreg_set_level(vreg, val); - break; - } - return 0; -} - -static int vreg_debug_get(void *data, u64 *val) -{ - struct vreg *vreg = data; - - if (!vreg->status) - *val = 0; - else - *val = 1; - - return 0; -} - -static int vreg_debug_count_set(void *data, u64 val) -{ - struct vreg *vreg = data; - if (val > UINT_MAX) - val = UINT_MAX; - vreg->refcnt = val; - return 0; -} - -static int vreg_debug_count_get(void *data, u64 *val) -{ - struct vreg *vreg = data; - - *val = vreg->refcnt; - - return 0; -} - -DEFINE_SIMPLE_ATTRIBUTE(vreg_fops, vreg_debug_get, vreg_debug_set, "%llu\n"); -DEFINE_SIMPLE_ATTRIBUTE(vreg_count_fops, vreg_debug_count_get, - vreg_debug_count_set, "%llu\n"); - -static int __init vreg_debug_init(void) -{ - struct dentry *dent; - int n; - char name[32]; - const char *refcnt_name = "_refcnt"; - - dent = debugfs_create_dir("vreg", 0); - if (IS_ERR(dent)) - return 0; - - for (n = 0; n < ARRAY_SIZE(vregs); n++) { - (void) debugfs_create_file(vregs[n].name, 0644, - dent, vregs + n, &vreg_fops); - - strlcpy(name, vregs[n].name, sizeof(name)); - strlcat(name, refcnt_name, sizeof(name)); - (void) debugfs_create_file(name, 0644, - dent, vregs + n, &vreg_count_fops); - } - - return 0; -} - -device_initcall(vreg_debug_init); -#endif diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 89a139ed7d5b..31b66f26e029 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -184,7 +184,7 @@ static void __init mvebu_dt_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static const char * const armada_370_xp_dt_compat[] = { +static const char * const armada_370_xp_dt_compat[] __initconst = { "marvell,armada-370-xp", NULL, }; @@ -205,7 +205,7 @@ DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)") .dt_compat = armada_370_xp_dt_compat, MACHINE_END -static const char * const armada_375_dt_compat[] = { +static const char * const armada_375_dt_compat[] __initconst = { "marvell,armada375", NULL, }; @@ -219,7 +219,7 @@ DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)") .dt_compat = armada_375_dt_compat, MACHINE_END -static const char * const armada_38x_dt_compat[] = { +static const char * const armada_38x_dt_compat[] __initconst = { "marvell,armada380", "marvell,armada385", NULL, diff --git a/arch/arm/mach-mvebu/dove.c b/arch/arm/mach-mvebu/dove.c index b50464ec1130..5a1741500a30 100644 --- a/arch/arm/mach-mvebu/dove.c +++ b/arch/arm/mach-mvebu/dove.c @@ -27,7 +27,7 @@ static void __init dove_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -static const char * const dove_dt_compat[] = { +static const char * const dove_dt_compat[] __initconst = { "marvell,dove", NULL }; diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index 6b5310828eb2..925f75f54268 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -186,7 +186,7 @@ static void __init kirkwood_dt_init(void) of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL); } -static const char * const kirkwood_dt_board_compat[] = { +static const char * const kirkwood_dt_board_compat[] __initconst = { "marvell,kirkwood", NULL }; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 1041b19485ab..3e4b4ae8c75b 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -176,12 +176,6 @@ config MACH_OMAP3_BEAGLE default y select OMAP_PACKAGE_CBB -config MACH_DEVKIT8000 - bool "DEVKIT8000 board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CUS - config MACH_OMAP_LDP bool "OMAP3 LDP board" depends on ARCH_OMAP3 @@ -226,12 +220,6 @@ config MACH_OMAP3_PANDORA select OMAP_PACKAGE_CBB select REGULATOR_FIXED_VOLTAGE if REGULATOR -config MACH_TOUCHBOOK - bool "OMAP3 Touch Book" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config MACH_NOKIA_N810 bool @@ -261,12 +249,6 @@ config MACH_CM_T35 config MACH_CM_T3730 bool -config MACH_SBC3530 - bool "OMAP3 SBC STALKER board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CUS - config OMAP3_SDRC_AC_TIMING bool "Enable SDRC AC timing register changes" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b83f18fcec9b..ec002bd4af77 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -243,7 +243,6 @@ obj-$(CONFIG_SOC_OMAP2420) += msdi.o # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o -obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o @@ -254,9 +253,6 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o -obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o - -obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o # Platform specific device init code diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c deleted file mode 100644 index d8e4f346936a..000000000000 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ /dev/null @@ -1,654 +0,0 @@ -/* - * board-devkit8000.c - TimLL Devkit8000 - * - * Copyright (C) 2009 Kim Botherway - * Copyright (C) 2010 Thomas Weber - * - * Modified from mach-omap2/board-omap3beagle.c - * - * Initial code: Syed Mohammed Khasim - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/leds.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/nand.h> -#include <linux/mmc/host.h> -#include <linux/usb/phy.h> - -#include <linux/regulator/machine.h> -#include <linux/i2c/twl.h> -#include "id.h" -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> - -#include "common.h" -#include "gpmc.h" -#include <linux/platform_data/mtd-nand-omap2.h> -#include <video/omapdss.h> -#include <video/omap-panel-data.h> - -#include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/input/matrix_keypad.h> -#include <linux/spi/spi.h> -#include <linux/dm9000.h> -#include <linux/interrupt.h> - -#include "sdram-micron-mt46h32m32lf-6.h" -#include "mux.h" -#include "hsmmc.h" -#include "board-flash.h" -#include "common-board-devices.h" - -#define NAND_CS 0 - -#define OMAP_DM9000_GPIO_IRQ 25 -#define OMAP3_DEVKIT_TS_GPIO 27 - -static struct mtd_partition devkit8000_nand_partitions[] = { - /* All the partition sizes are listed in terms of NAND block size */ - { - .name = "X-Loader", - .offset = 0, - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 15 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot Env", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ - .size = 1 * NAND_BLOCK_SIZE, - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - .gpio_wp = 29, - .deferred = true, - }, - {} /* Terminator */ -}; - -static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -/* ads7846 on SPI */ -static struct regulator_consumer_supply devkit8000_vio_supply[] = { - REGULATOR_SUPPLY("vcc", "spi2.0"), -}; - -static const struct display_timing devkit8000_lcd_videomode = { - .pixelclock = { 0, 40000000, 0 }, - - .hactive = { 0, 800, 0 }, - .hfront_porch = { 0, 1, 0 }, - .hback_porch = { 0, 1, 0 }, - .hsync_len = { 0, 48, 0 }, - - .vactive = { 0, 480, 0 }, - .vfront_porch = { 0, 12, 0 }, - .vback_porch = { 0, 25, 0 }, - .vsync_len = { 0, 3, 0 }, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | - DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, -}; - -static struct panel_dpi_platform_data devkit8000_lcd_pdata = { - .name = "lcd", - .source = "dpi.0", - - .data_lines = 24, - - .display_timing = &devkit8000_lcd_videomode, - - .enable_gpio = -1, /* filled in code */ - .backlight_gpio = -1, -}; - -static struct platform_device devkit8000_lcd_device = { - .name = "panel-dpi", - .id = 0, - .dev.platform_data = &devkit8000_lcd_pdata, -}; - -static struct connector_dvi_platform_data devkit8000_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = 1, -}; - -static struct platform_device devkit8000_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &devkit8000_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data devkit8000_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = -1, /* filled in code */ -}; - -static struct platform_device devkit8000_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &devkit8000_tfp410_pdata, -}; - -static struct connector_atv_platform_data devkit8000_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, - .invert_polarity = false, -}; - -static struct platform_device devkit8000_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &devkit8000_tv_pdata, -}; - -static struct omap_dss_board_info devkit8000_dss_data = { - .default_display_name = "lcd", -}; - -static uint32_t board_keymap[] = { - KEY(0, 0, KEY_1), - KEY(1, 0, KEY_2), - KEY(2, 0, KEY_3), - KEY(0, 1, KEY_4), - KEY(1, 1, KEY_5), - KEY(2, 1, KEY_6), - KEY(3, 1, KEY_F5), - KEY(0, 2, KEY_7), - KEY(1, 2, KEY_8), - KEY(2, 2, KEY_9), - KEY(3, 2, KEY_F6), - KEY(0, 3, KEY_F7), - KEY(1, 3, KEY_0), - KEY(2, 3, KEY_F8), - PERSISTENT_KEY(4, 5), - KEY(4, 4, KEY_VOLUMEUP), - KEY(5, 5, KEY_VOLUMEDOWN), - 0 -}; - -static struct matrix_keymap_data board_map_data = { - .keymap = board_keymap, - .keymap_size = ARRAY_SIZE(board_keymap), -}; - -static struct twl4030_keypad_data devkit8000_kp_data = { - .keymap_data = &board_map_data, - .rows = 6, - .cols = 6, - .rep = 1, -}; - -static struct gpio_led gpio_leds[]; - -static int devkit8000_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - - /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ - devkit8000_lcd_pdata.enable_gpio = gpio + TWL4030_GPIO_MAX + 0; - - /* gpio + 7 is "DVI_PD" (out, active low) */ - devkit8000_tfp410_pdata.power_down_gpio = gpio + 7; - - return 0; -} - -static struct twl4030_gpio_platform_data devkit8000_gpio_data = { - .use_leds = true, - .pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13) - | BIT(15) | BIT(16) | BIT(17), - .setup = devkit8000_twl_gpio_setup, -}; - -static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data devkit8000_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(devkit8000_vmmc1_supply), - .consumer_supplies = devkit8000_vmmc1_supply, -}; - -/* VPLL1 for digital video outputs */ -static struct regulator_init_data devkit8000_vpll1 = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(devkit8000_vpll1_supplies), - .consumer_supplies = devkit8000_vpll1_supplies, -}; - -/* VAUX4 for ads7846 and nubs */ -static struct regulator_init_data devkit8000_vio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(devkit8000_vio_supply), - .consumer_supplies = devkit8000_vio_supply, -}; - -static struct twl4030_platform_data devkit8000_twldata = { - /* platform_data for children goes here */ - .gpio = &devkit8000_gpio_data, - .vmmc1 = &devkit8000_vmmc1, - .vpll1 = &devkit8000_vpll1, - .vio = &devkit8000_vio, - .keypad = &devkit8000_kp_data, -}; - -static int __init devkit8000_i2c_init(void) -{ - omap3_pmic_get_config(&devkit8000_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC); - omap3_pmic_init("tps65930", &devkit8000_twldata); - /* Bus 3 is attached to the DVI port where devices like the pico DLP - * projector don't work reliably with 400kHz */ - omap_register_i2c_bus(3, 400, NULL, 0); - return 0; -} - -static struct gpio_led gpio_leds[] = { - { - .name = "led1", - .default_trigger = "heartbeat", - .gpio = 186, - .active_low = true, - }, - { - .name = "led2", - .default_trigger = "mmc0", - .gpio = 163, - .active_low = true, - }, - { - .name = "ledB", - .default_trigger = "none", - .gpio = 153, - .active_low = true, - }, - { - .name = "led3", - .default_trigger = "none", - .gpio = 164, - .active_low = true, - }, -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, -}; - -static struct gpio_keys_button gpio_buttons[] = { - { - .code = BTN_EXTRA, - .gpio = 26, - .desc = "user", - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data gpio_key_info = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -static struct platform_device keys_gpio = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_key_info, - }, -}; - -#define OMAP_DM9000_BASE 0x2c000000 - -static struct resource omap_dm9000_resources[] = { - [0] = { - .start = OMAP_DM9000_BASE, - .end = (OMAP_DM9000_BASE + 0x4 - 1), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (OMAP_DM9000_BASE + 0x400), - .end = (OMAP_DM9000_BASE + 0x400 + 0x4 - 1), - .flags = IORESOURCE_MEM, - }, - [2] = { - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, - }, -}; - -static struct dm9000_plat_data omap_dm9000_platdata = { - .flags = DM9000_PLATF_16BITONLY, -}; - -static struct platform_device omap_dm9000_dev = { - .name = "dm9000", - .id = -1, - .num_resources = ARRAY_SIZE(omap_dm9000_resources), - .resource = omap_dm9000_resources, - .dev = { - .platform_data = &omap_dm9000_platdata, - }, -}; - -static void __init omap_dm9000_init(void) -{ - unsigned char *eth_addr = omap_dm9000_platdata.dev_addr; - struct omap_die_id odi; - int ret; - - ret = gpio_request_one(OMAP_DM9000_GPIO_IRQ, GPIOF_IN, "dm9000 irq"); - if (ret < 0) { - printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n", - OMAP_DM9000_GPIO_IRQ); - return; - } - - /* init the mac address using DIE id */ - omap_get_die_id(&odi); - - eth_addr[0] = 0x02; /* locally administered */ - eth_addr[1] = odi.id_1 & 0xff; - eth_addr[2] = (odi.id_0 & 0xff000000) >> 24; - eth_addr[3] = (odi.id_0 & 0x00ff0000) >> 16; - eth_addr[4] = (odi.id_0 & 0x0000ff00) >> 8; - eth_addr[5] = (odi.id_0 & 0x000000ff); -} - -static struct platform_device *devkit8000_devices[] __initdata = { - &leds_gpio, - &keys_gpio, - &omap_dm9000_dev, - &devkit8000_lcd_device, - &devkit8000_tfp410_device, - &devkit8000_dvi_connector_device, - &devkit8000_tv_connector_device, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - /* nCS and IRQ for Devkit8000 ethernet */ - OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE0), - OMAP3_MUX(ETK_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), - - /* McSPI 2*/ - OMAP3_MUX(MCSPI2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI2_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCSPI2_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI2_CS0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCSPI2_CS1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - - /* PENDOWN GPIO */ - OMAP3_MUX(ETK_D13, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - - /* mUSB */ - OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* USB 1 */ - OMAP3_MUX(ETK_CTL, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT), - OMAP3_MUX(ETK_D8, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D9, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D0, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D2, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D4, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D5, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D6, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - OMAP3_MUX(ETK_D7, OMAP_MUX_MODE3 | OMAP_PIN_INPUT), - - /* MMC 1 */ - OMAP3_MUX(SDMMC1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(SDMMC1_DAT7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* McBSP 2 */ - OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - - /* I2C 1 */ - OMAP3_MUX(I2C1_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(I2C1_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* I2C 2 */ - OMAP3_MUX(I2C2_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* I2C 3 */ - OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* I2C 4 */ - OMAP3_MUX(I2C4_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(I2C4_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* serial ports */ - OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* DSS */ - OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - - /* expansion port */ - /* McSPI 1 */ - OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - OMAP3_MUX(MCSPI1_CS3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - - /* HDQ */ - OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* McSPI4 */ - OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP), - - /* MMC 2 */ - OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - - /* I2C3 */ - OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - - OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - - /* TPS IRQ */ - OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \ - OMAP_PIN_INPUT_PULLUP), - - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init devkit8000_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); - - omap_dm9000_init(); - - omap_hsmmc_init(mmc); - devkit8000_i2c_init(); - omap_dm9000_resources[2].start = gpio_to_irq(OMAP_DM9000_GPIO_IRQ); - platform_add_devices(devkit8000_devices, - ARRAY_SIZE(devkit8000_devices)); - - omap_display_init(&devkit8000_dss_data); - - omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL); - - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - usbhs_init(&usbhs_bdata); - board_nand_init(devkit8000_nand_partitions, - ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS, - NAND_BUSWIDTH_16, NULL); - omap_twl4030_audio_init("omap3beagle", NULL); - - /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); -} - -MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = devkit8000_init, - .init_late = omap35xx_init_late, - .init_time = omap3_secure_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c deleted file mode 100644 index 6311f4b1ee44..000000000000 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ /dev/null @@ -1,433 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-omap3evm.c - * - * Copyright (C) 2008 Guangzhou EMA-Tech - * - * Modified from mach-omap2/board-omap3evm.c - * - * Initial code: Syed Mohammed Khasim - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/leds.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> - -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/i2c/twl.h> -#include <linux/mmc/host.h> -#include <linux/input/matrix_keypad.h> -#include <linux/spi/spi.h> -#include <linux/interrupt.h> -#include <linux/smsc911x.h> -#include <linux/platform_data/at24.h> -#include <linux/usb/phy.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> - -#include "common.h" -#include "gpmc.h" -#include <linux/platform_data/mtd-nand-omap2.h> -#include <video/omapdss.h> -#include <video/omap-panel-data.h> - -#include <linux/platform_data/spi-omap2-mcspi.h> - -#include "sdram-micron-mt46h32m32lf-6.h" -#include "mux.h" -#include "hsmmc.h" -#include "common-board-devices.h" - -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) -#include "gpmc-smsc911x.h" - -#define OMAP3STALKER_ETHR_START 0x2c000000 -#define OMAP3STALKER_ETHR_SIZE 1024 -#define OMAP3STALKER_ETHR_GPIO_IRQ 19 -#define OMAP3STALKER_SMC911X_CS 5 - -static struct omap_smsc911x_platform_data smsc911x_cfg = { - .cs = OMAP3STALKER_SMC911X_CS, - .gpio_irq = OMAP3STALKER_ETHR_GPIO_IRQ, - .gpio_reset = -EINVAL, - .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS), -}; - -static inline void __init omap3stalker_init_eth(void) -{ - omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP); - gpmc_smsc911x_init(&smsc911x_cfg); -} - -#else -static inline void __init omap3stalker_init_eth(void) -{ - return; -} -#endif - -/* - * OMAP3 DSS control signals - */ - -#define DSS_ENABLE_GPIO 199 -#define LCD_PANEL_BKLIGHT_GPIO 210 -#define ENABLE_VPLL2_DEV_GRP 0xE0 - -static void __init omap3_stalker_display_init(void) -{ - return; -} -static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = -1, -}; - -static struct platform_device omap3stalker_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &omap3stalker_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = DSS_ENABLE_GPIO, -}; - -static struct platform_device omap3stalker_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &omap3stalker_tfp410_pdata, -}; - -static struct connector_atv_platform_data omap3stalker_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE, - .invert_polarity = false, -}; - -static struct platform_device omap3stalker_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &omap3stalker_tv_pdata, -}; - -static struct omap_dss_board_info omap3_stalker_dss_data = { - .default_display_name = "dvi", -}; - -static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply omap3stalker_vsim_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data omap3stalker_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vmmc1_supply), - .consumer_supplies = omap3stalker_vmmc1_supply, -}; - -/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ -static struct regulator_init_data omap3stalker_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vsim_supply), - .consumer_supplies = omap3stalker_vsim_supply, -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = 23, - .deferred = true, - }, - {} /* Terminator */ -}; - -static struct gpio_keys_button gpio_buttons[] = { - { - .code = BTN_EXTRA, - .gpio = 18, - .desc = "user", - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data gpio_key_info = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -static struct platform_device keys_gpio = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_key_info, - }, -}; - -static struct gpio_led gpio_leds[] = { - { - .name = "stalker:D8:usr0", - .default_trigger = "default-on", - .gpio = 126, - }, - { - .name = "stalker:D9:usr1", - .default_trigger = "default-on", - .gpio = 127, - }, - { - .name = "stalker:D3:mmc0", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - .default_trigger = "mmc0", - }, - { - .name = "stalker:D4:heartbeat", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - .default_trigger = "heartbeat", - }, -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, -}; - -static int -omap3stalker_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - /* - * Most GPIOs are for USB OTG. Some are mostly sent to - * the P2 connector; notably LEDA for the LCD backlight. - */ - - /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ - gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, - "EN_LCD_BKL"); - - /* gpio + 7 == DVI Enable */ - gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); - - /* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - /* GPIO + 13 == ledsync (out, heartbeat) */ - gpio_leds[3].gpio = gpio + 13; - - platform_device_register(&leds_gpio); - return 0; -} - -static struct twl4030_gpio_platform_data omap3stalker_gpio_data = { - .use_leds = true, - .setup = omap3stalker_twl_gpio_setup, -}; - -static uint32_t board_keymap[] = { - KEY(0, 0, KEY_LEFT), - KEY(0, 1, KEY_DOWN), - KEY(0, 2, KEY_ENTER), - KEY(0, 3, KEY_M), - - KEY(1, 0, KEY_RIGHT), - KEY(1, 1, KEY_UP), - KEY(1, 2, KEY_I), - KEY(1, 3, KEY_N), - - KEY(2, 0, KEY_A), - KEY(2, 1, KEY_E), - KEY(2, 2, KEY_J), - KEY(2, 3, KEY_O), - - KEY(3, 0, KEY_B), - KEY(3, 1, KEY_F), - KEY(3, 2, KEY_K), - KEY(3, 3, KEY_P) -}; - -static struct matrix_keymap_data board_map_data = { - .keymap = board_keymap, - .keymap_size = ARRAY_SIZE(board_keymap), -}; - -static struct twl4030_keypad_data omap3stalker_kp_data = { - .keymap_data = &board_map_data, - .rows = 4, - .cols = 4, - .rep = 1, -}; - -static struct twl4030_platform_data omap3stalker_twldata = { - /* platform_data for children goes here */ - .keypad = &omap3stalker_kp_data, - .gpio = &omap3stalker_gpio_data, - .vmmc1 = &omap3stalker_vmmc1, - .vsim = &omap3stalker_vsim, -}; - -static struct at24_platform_data fram_info = { - .byte_len = (64 * 1024) / 8, - .page_size = 8192, - .flags = AT24_FLAG_ADDR16 | AT24_FLAG_IRUGO, -}; - -static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = { - { - I2C_BOARD_INFO("24c64", 0x50), - .flags = I2C_CLIENT_WAKE, - .platform_data = &fram_info, - }, -}; - -static int __init omap3_stalker_i2c_init(void) -{ - omap3_pmic_get_config(&omap3stalker_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | - TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - - omap3stalker_twldata.vdac->constraints.apply_uV = true; - omap3stalker_twldata.vpll2->constraints.apply_uV = true; - omap3stalker_twldata.vpll2->constraints.name = "VDVI"; - - omap3_pmic_init("twl4030", &omap3stalker_twldata); - omap_register_i2c_bus(2, 400, NULL, 0); - omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3, - ARRAY_SIZE(omap3stalker_i2c_boardinfo3)); - return 0; -} - -#define OMAP3_STALKER_TS_GPIO 175 - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 2, - .reset_gpio = 21, - .vcc_gpio = -EINVAL, - }, -}; - -static struct platform_device *omap3_stalker_devices[] __initdata = { - &keys_gpio, - &omap3stalker_tfp410_device, - &omap3stalker_dvi_connector_device, - &omap3stalker_tv_connector_device, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), - OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), - {.reg_offset = OMAP_MUX_TERMINATOR}, -}; -#endif - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -static void __init omap3_stalker_init(void) -{ - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); - - omap_mux_init_gpio(23, OMAP_PIN_INPUT); - omap_hsmmc_init(mmc); - - omap3_stalker_i2c_init(); - - platform_add_devices(omap3_stalker_devices, - ARRAY_SIZE(omap3_stalker_devices)); - - omap_display_init(&omap3_stalker_dss_data); - - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); - omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); - - omap_mux_init_gpio(21, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP); - - omap3stalker_init_eth(); - omap3_stalker_display_init(); -/* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT); -} - -MACHINE_START(SBC3530, "OMAP3 STALKER") - /* Maintainer: Jason Lam -lzg@ema-tech.com */ - .atag_offset = 0x100, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = omap3_stalker_init, - .init_late = omap35xx_init_late, - .init_time = omap3_secure_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c deleted file mode 100644 index a01993e5500f..000000000000 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ /dev/null @@ -1,395 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-omap3touchbook.c - * - * Copyright (C) 2009 Always Innovating - * - * Modified from mach-omap2/board-omap3beagleboard.c - * - * Initial code: Grégoire Gentil, Tim Yamin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/leds.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/nand.h> -#include <linux/mmc/host.h> -#include <linux/usb/phy.h> - -#include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/spi/spi.h> - -#include <linux/spi/ads7846.h> - -#include <linux/regulator/machine.h> -#include <linux/i2c/twl.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> -#include <asm/system_info.h> - -#include "common.h" -#include "gpmc.h" -#include <linux/platform_data/mtd-nand-omap2.h> - -#include "mux.h" -#include "hsmmc.h" -#include "board-flash.h" -#include "common-board-devices.h" - -#include <asm/setup.h> - -#define OMAP3_AC_GPIO 136 -#define OMAP3_TS_GPIO 162 -#define TB_BL_PWM_TIMER 9 -#define TB_KILL_POWER_GPIO 168 - -#define NAND_CS 0 - -static unsigned long touchbook_revision; - -static struct mtd_partition omap3touchbook_nand_partitions[] = { - /* All the partition sizes are listed in terms of NAND block size */ - { - .name = "X-Loader", - .offset = 0, - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 15 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot Env", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ - .size = 1 * NAND_BLOCK_SIZE, - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -#include "sdram-micron-mt46h32m32lf-6.h" - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - .gpio_wp = 29, - .deferred = true, - }, - {} /* Terminator */ -}; - -static struct regulator_consumer_supply touchbook_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply touchbook_vsim_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), -}; - -static struct gpio_led gpio_leds[]; - -static int touchbook_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - /* REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"); - - /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ - gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, - "nEN_USB_PWR"); - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - - return 0; -} - -static struct twl4030_gpio_platform_data touchbook_gpio_data = { - .use_leds = true, - .pullups = BIT(1), - .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) - | BIT(15) | BIT(16) | BIT(17), - .setup = touchbook_twl_gpio_setup, -}; - -static struct regulator_consumer_supply touchbook_vdac_supply[] = { -{ - .supply = "vdac", -}, -}; - -static struct regulator_consumer_supply touchbook_vdvi_supply[] = { -{ - .supply = "vdvi", -}, -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data touchbook_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(touchbook_vmmc1_supply), - .consumer_supplies = touchbook_vmmc1_supply, -}; - -/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ -static struct regulator_init_data touchbook_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(touchbook_vsim_supply), - .consumer_supplies = touchbook_vsim_supply, -}; - -static struct twl4030_platform_data touchbook_twldata = { - /* platform_data for children goes here */ - .gpio = &touchbook_gpio_data, - .vmmc1 = &touchbook_vmmc1, - .vsim = &touchbook_vsim, -}; - -static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("bq27200", 0x55), - }, -}; - -static int __init omap3_touchbook_i2c_init(void) -{ - /* Standard TouchBook bus */ - omap3_pmic_get_config(&touchbook_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - - touchbook_twldata.vdac->num_consumer_supplies = - ARRAY_SIZE(touchbook_vdac_supply); - touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply; - - touchbook_twldata.vpll2->constraints.name = "VDVI"; - touchbook_twldata.vpll2->num_consumer_supplies = - ARRAY_SIZE(touchbook_vdvi_supply); - touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply; - - omap3_pmic_init("twl4030", &touchbook_twldata); - /* Additional TouchBook bus */ - omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, - ARRAY_SIZE(touchBook_i2c_boardinfo)); - - return 0; -} - -static struct ads7846_platform_data ads7846_pdata = { - .x_min = 100, - .y_min = 265, - .x_max = 3950, - .y_max = 3750, - .x_plate_ohms = 40, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 5, - .debounce_rep = 1, - .gpio_pendown = OMAP3_TS_GPIO, - .keep_vref_on = 1, -}; - -static struct gpio_led gpio_leds[] = { - { - .name = "touchbook::usr0", - .default_trigger = "heartbeat", - .gpio = 150, - }, - { - .name = "touchbook::usr1", - .default_trigger = "mmc0", - .gpio = 149, - }, - { - .name = "touchbook::pmu_stat", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - }, -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, -}; - -static struct gpio_keys_button gpio_buttons[] = { - { - .code = BTN_EXTRA, - .gpio = 7, - .desc = "user", - .wakeup = 1, - }, - { - .code = KEY_POWER, - .gpio = 183, - .desc = "power", - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data gpio_key_info = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -static struct platform_device keys_gpio = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_key_info, - }, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 2, - .reset_gpio = 147, - .vcc_gpio = -EINVAL, - }, -}; - -static struct platform_device *omap3_touchbook_devices[] __initdata = { - &leds_gpio, - &keys_gpio, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -static void omap3_touchbook_poweroff(void) -{ - int pwr_off = TB_KILL_POWER_GPIO; - - if (gpio_request_one(pwr_off, GPIOF_OUT_INIT_LOW, "DVI reset") < 0) - printk(KERN_ERR "Unable to get kill power GPIO\n"); -} - -static int __init early_touchbook_revision(char *p) -{ - if (!p) - return 0; - - return kstrtoul(p, 10, &touchbook_revision); -} -early_param("tbr", early_touchbook_revision); - -static void __init omap3_touchbook_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - - pm_power_off = omap3_touchbook_poweroff; - - if (system_rev >= 0x20 && system_rev <= 0x34301000) { - omap_mux_init_gpio(23, OMAP_PIN_INPUT); - mmc[0].gpio_wp = 23; - } else { - omap_mux_init_gpio(29, OMAP_PIN_INPUT); - } - omap_hsmmc_init(mmc); - - omap3_touchbook_i2c_init(); - platform_add_devices(omap3_touchbook_devices, - ARRAY_SIZE(omap3_touchbook_devices)); - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); - - omap_mux_init_gpio(170, OMAP_PIN_INPUT); - /* REVISIT leave DVI powered down until it's needed ... */ - gpio_request_one(176, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); - - /* Touchscreen and accelerometer */ - omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); - board_nand_init(omap3touchbook_nand_partitions, - ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS, - NAND_BUSWIDTH_16, NULL); - - /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); -} - -MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") - /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */ - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3430_init_early, - .init_irq = omap3_init_irq, - .init_machine = omap3_touchbook_init, - .init_late = omap3430_init_late, - .init_time = omap3_secure_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index d53996e6da97..03794b0de64b 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -12,8 +12,8 @@ obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o pm-r8a7740.o obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o pm-r8a7779.o -obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o pm-r8a7790.o -obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o pm-r8a7791.o +obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o +obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o obj-$(CONFIG_ARCH_R8A7794) += setup-r8a7794.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o @@ -46,10 +46,10 @@ smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o # PM objects obj-$(CONFIG_SUSPEND) += suspend.o -obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_PM_RCAR) += pm-rcar.o obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o +obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o # special sh7372 handling for IRQ objects and low level sleep code obj-$(CONFIG_ARCH_SH7372) += entry-intc.o sleep-sh7372.o diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index 309025efd4cf..1dc09713f753 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -23,8 +23,6 @@ struct clk; extern int shmobile_clk_init(void); extern void shmobile_handle_irq_intc(struct pt_regs *); extern struct platform_suspend_ops shmobile_suspend_ops; -struct cpuidle_driver; -extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv); #ifdef CONFIG_SUSPEND int shmobile_suspend_init(void); @@ -34,12 +32,6 @@ static inline int shmobile_suspend_init(void) { return 0; } static inline void shmobile_smp_apmu_suspend_init(void) { } #endif -#ifdef CONFIG_CPU_IDLE -int shmobile_cpuidle_init(void); -#else -static inline int shmobile_cpuidle_init(void) { return 0; } -#endif - #ifdef CONFIG_CPU_FREQ int shmobile_cpufreq_init(void); #else @@ -51,7 +43,6 @@ extern void __iomem *shmobile_scu_base; static inline void __init shmobile_init_late(void) { shmobile_suspend_init(); - shmobile_cpuidle_init(); shmobile_cpufreq_init(); } diff --git a/arch/arm/mach-shmobile/cpuidle.c b/arch/arm/mach-shmobile/cpuidle.c deleted file mode 100644 index 0afeb5c7061c..000000000000 --- a/arch/arm/mach-shmobile/cpuidle.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * CPUIdle support code for SH-Mobile ARM - * - * Copyright (C) 2011 Magnus Damm - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/pm.h> -#include <linux/cpuidle.h> -#include <linux/suspend.h> -#include <linux/module.h> -#include <linux/err.h> -#include <asm/cpuidle.h> -#include <asm/io.h> - -static struct cpuidle_driver shmobile_cpuidle_default_driver = { - .name = "shmobile_cpuidle", - .owner = THIS_MODULE, - .states[0] = ARM_CPUIDLE_WFI_STATE, - .safe_state_index = 0, /* C1 */ - .state_count = 1, -}; - -static struct cpuidle_driver *cpuidle_drv = &shmobile_cpuidle_default_driver; - -void __init shmobile_cpuidle_set_driver(struct cpuidle_driver *drv) -{ - cpuidle_drv = drv; -} - -int __init shmobile_cpuidle_init(void) -{ - return cpuidle_register(cpuidle_drv, NULL); -} diff --git a/arch/arm/mach-shmobile/pm-r8a7790.c b/arch/arm/mach-shmobile/pm-r8a7790.c deleted file mode 100644 index 80e8d95e54d3..000000000000 --- a/arch/arm/mach-shmobile/pm-r8a7790.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * r8a7790 Power management support - * - * Copyright (C) 2013 Renesas Electronics Corporation - * Copyright (C) 2011 Renesas Solutions Corp. - * Copyright (C) 2011 Magnus Damm - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/kernel.h> -#include <linux/smp.h> -#include <asm/io.h> -#include "common.h" -#include "pm-rcar.h" -#include "r8a7790.h" - -/* RST */ -#define RST 0xe6160000 -#define CA15BAR 0x0020 -#define CA7BAR 0x0030 -#define CA15RESCNT 0x0040 -#define CA7RESCNT 0x0044 - -/* On-chip RAM */ -#define MERAM 0xe8080000 - -/* SYSC */ -#define SYSCIER 0x0c -#define SYSCIMR 0x10 - -#if defined(CONFIG_SMP) - -static void __init r8a7790_sysc_init(void) -{ - void __iomem *base = rcar_sysc_init(0xe6180000); - - /* enable all interrupt sources, but do not use interrupt handler */ - iowrite32(0x0131000e, base + SYSCIER); - iowrite32(0, base + SYSCIMR); -} - -#else /* CONFIG_SMP */ - -static inline void r8a7790_sysc_init(void) {} - -#endif /* CONFIG_SMP */ - -void __init r8a7790_pm_init(void) -{ - void __iomem *p; - u32 bar; - static int once; - - if (once++) - return; - - /* MERAM for jump stub, because BAR requires 256KB aligned address */ - p = ioremap_nocache(MERAM, shmobile_boot_size); - memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); - iounmap(p); - - /* setup reset vectors */ - p = ioremap_nocache(RST, 0x63); - bar = (MERAM >> 8) & 0xfffffc00; - writel_relaxed(bar, p + CA15BAR); - writel_relaxed(bar, p + CA7BAR); - writel_relaxed(bar | 0x10, p + CA15BAR); - writel_relaxed(bar | 0x10, p + CA7BAR); - - /* de-assert reset for all CPUs */ - writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000, - p + CA15RESCNT); - writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000, - p + CA7RESCNT); - iounmap(p); - - r8a7790_sysc_init(); - shmobile_smp_apmu_suspend_init(); -} diff --git a/arch/arm/mach-shmobile/pm-r8a7791.c b/arch/arm/mach-shmobile/pm-r8a7791.c deleted file mode 100644 index 25f107bb3657..000000000000 --- a/arch/arm/mach-shmobile/pm-r8a7791.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * r8a7791 Power management support - * - * Copyright (C) 2014 Renesas Electronics Corporation - * Copyright (C) 2011 Renesas Solutions Corp. - * Copyright (C) 2011 Magnus Damm - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/kernel.h> -#include <linux/smp.h> -#include <asm/io.h> -#include "common.h" -#include "pm-rcar.h" -#include "r8a7791.h" - -#define RST 0xe6160000 -#define CA15BAR 0x0020 -#define CA15RESCNT 0x0040 -#define RAM 0xe6300000 - -/* SYSC */ -#define SYSCIER 0x0c -#define SYSCIMR 0x10 - -#if defined(CONFIG_SMP) - -static void __init r8a7791_sysc_init(void) -{ - void __iomem *base = rcar_sysc_init(0xe6180000); - - /* enable all interrupt sources, but do not use interrupt handler */ - iowrite32(0x0131000e, base + SYSCIER); - iowrite32(0, base + SYSCIMR); -} - -#else /* CONFIG_SMP */ - -static inline void r8a7791_sysc_init(void) {} - -#endif /* CONFIG_SMP */ - -void __init r8a7791_pm_init(void) -{ - void __iomem *p; - u32 bar; - static int once; - - if (once++) - return; - - /* RAM for jump stub, because BAR requires 256KB aligned address */ - p = ioremap_nocache(RAM, shmobile_boot_size); - memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); - iounmap(p); - - /* setup reset vectors */ - p = ioremap_nocache(RST, 0x63); - bar = (RAM >> 8) & 0xfffffc00; - writel_relaxed(bar, p + CA15BAR); - writel_relaxed(bar | 0x10, p + CA15BAR); - - /* enable clocks to all CPUs */ - writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000, - p + CA15RESCNT); - iounmap(p); - - r8a7791_sysc_init(); - shmobile_smp_apmu_suspend_init(); -} diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c new file mode 100644 index 000000000000..6815781ad116 --- /dev/null +++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c @@ -0,0 +1,115 @@ +/* + * R-Car Generation 2 Power management support + * + * Copyright (C) 2013 - 2015 Renesas Electronics Corporation + * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/smp.h> +#include <asm/io.h> +#include "common.h" +#include "pm-rcar.h" +#include "rcar-gen2.h" + +/* RST */ +#define RST 0xe6160000 +#define CA15BAR 0x0020 +#define CA7BAR 0x0030 +#define CA15RESCNT 0x0040 +#define CA7RESCNT 0x0044 + +/* On-chip RAM */ +#define MERAM 0xe8080000 +#define RAM 0xe6300000 + +/* SYSC */ +#define SYSCIER 0x0c +#define SYSCIMR 0x10 + +#if defined(CONFIG_SMP) + +static void __init rcar_gen2_sysc_init(u32 syscier) +{ + void __iomem *base = rcar_sysc_init(0xe6180000); + + /* enable all interrupt sources, but do not use interrupt handler */ + iowrite32(syscier, base + SYSCIER); + iowrite32(0, base + SYSCIMR); +} + +#else /* CONFIG_SMP */ + +static inline void rcar_gen2_sysc_init(u32 syscier) {} + +#endif /* CONFIG_SMP */ + +void __init rcar_gen2_pm_init(void) +{ + void __iomem *p; + u32 bar; + static int once; + struct device_node *np, *cpus; + bool has_a7 = false; + bool has_a15 = false; + phys_addr_t boot_vector_addr = 0; + u32 syscier = 0; + + if (once++) + return; + + cpus = of_find_node_by_path("/cpus"); + if (!cpus) + return; + + for_each_child_of_node(cpus, np) { + if (of_device_is_compatible(np, "arm,cortex-a15")) + has_a15 = true; + else if (of_device_is_compatible(np, "arm,cortex-a7")) + has_a7 = true; + } + + if (of_machine_is_compatible("renesas,r8a7790")) { + boot_vector_addr = MERAM; + syscier = 0x013111ef; + + } else if (of_machine_is_compatible("renesas,r8a7791")) { + boot_vector_addr = RAM; + syscier = 0x00111003; + } + + /* RAM for jump stub, because BAR requires 256KB aligned address */ + p = ioremap_nocache(boot_vector_addr, shmobile_boot_size); + memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size); + iounmap(p); + + /* setup reset vectors */ + p = ioremap_nocache(RST, 0x63); + bar = (boot_vector_addr >> 8) & 0xfffffc00; + if (has_a15) { + writel_relaxed(bar, p + CA15BAR); + writel_relaxed(bar | 0x10, p + CA15BAR); + + /* de-assert reset for CA15 CPUs */ + writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | + 0xa5a50000, p + CA15RESCNT); + } + if (has_a7) { + writel_relaxed(bar, p + CA7BAR); + writel_relaxed(bar | 0x10, p + CA7BAR); + + /* de-assert reset for CA7 CPUs */ + writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | + 0x5a5a0000, p + CA7RESCNT); + } + iounmap(p); + + rcar_gen2_sysc_init(syscier); + shmobile_smp_apmu_suspend_init(); +} diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index c0293ae4b013..9f190528a556 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -462,7 +462,7 @@ static struct cpuidle_driver sh7372_cpuidle_driver = { static void __init sh7372_cpuidle_init(void) { - shmobile_cpuidle_set_driver(&sh7372_cpuidle_driver); + return cpuidle_register(cpuidle_drv, NULL); } #else static void __init sh7372_cpuidle_init(void) {} diff --git a/arch/arm/mach-shmobile/r8a7790.h b/arch/arm/mach-shmobile/r8a7790.h index bf73a850aaed..1a46d026052c 100644 --- a/arch/arm/mach-shmobile/r8a7790.h +++ b/arch/arm/mach-shmobile/r8a7790.h @@ -1,7 +1,6 @@ #ifndef __ASM_R8A7790_H__ #define __ASM_R8A7790_H__ -void r8a7790_pm_init(void); extern struct smp_operations r8a7790_smp_ops; #endif /* __ASM_R8A7790_H__ */ diff --git a/arch/arm/mach-shmobile/r8a7791.h b/arch/arm/mach-shmobile/r8a7791.h index 6cf11eb69d10..7ca0b7d0f59b 100644 --- a/arch/arm/mach-shmobile/r8a7791.h +++ b/arch/arm/mach-shmobile/r8a7791.h @@ -1,7 +1,6 @@ #ifndef __ASM_R8A7791_H__ #define __ASM_R8A7791_H__ -void r8a7791_pm_init(void); extern struct smp_operations r8a7791_smp_ops; #endif /* __ASM_R8A7791_H__ */ diff --git a/arch/arm/mach-shmobile/rcar-gen2.h b/arch/arm/mach-shmobile/rcar-gen2.h index ce53cb5f53a1..8a66b4aae035 100644 --- a/arch/arm/mach-shmobile/rcar-gen2.h +++ b/arch/arm/mach-shmobile/rcar-gen2.h @@ -5,5 +5,6 @@ void rcar_gen2_timer_init(void); #define MD(nr) BIT(nr) u32 rcar_gen2_read_mode_pins(void); void rcar_gen2_reserve(void); +void rcar_gen2_pm_init(void); #endif /* __ASM_RCAR_GEN2_H__ */ diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index dd64caf79216..9832e48396a4 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -842,13 +842,6 @@ static void __init r8a7740_generic_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -#define RESCNT2 IOMEM(0xe6188020) -static void r8a7740_restart(enum reboot_mode mode, const char *cmd) -{ - /* Do soft power on reset */ - writel(1 << 31, RESCNT2); -} - static const char *r8a7740_boards_compat_dt[] __initdata = { "renesas,r8a7740", NULL, @@ -861,7 +854,6 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") .init_machine = r8a7740_generic_init, .init_late = shmobile_init_late, .dt_compat = r8a7740_boards_compat_dt, - .restart = r8a7740_restart, MACHINE_END #endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index d1fa625e61f5..51464cc6d65b 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -50,9 +50,7 @@ u32 rcar_gen2_read_mode_pins(void) void __init rcar_gen2_timer_init(void) { -#if defined(CONFIG_ARM_ARCH_TIMER) || defined(CONFIG_COMMON_CLK) u32 mode = rcar_gen2_read_mode_pins(); -#endif #ifdef CONFIG_ARM_ARCH_TIMER void __iomem *base; int extal_mhz = 0; @@ -128,9 +126,7 @@ void __init rcar_gen2_timer_init(void) iounmap(base); #endif /* CONFIG_ARM_ARCH_TIMER */ -#ifdef CONFIG_COMMON_CLK rcar_gen2_clocks_init(mode); -#endif #ifdef CONFIG_ARCH_SHMOBILE_MULTI clocksource_of_init(); #endif diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c index 9c3da1345b8b..f8be41575d7c 100644 --- a/arch/arm/mach-shmobile/smp-r8a7790.c +++ b/arch/arm/mach-shmobile/smp-r8a7790.c @@ -23,6 +23,7 @@ #include "common.h" #include "platsmp-apmu.h" #include "pm-rcar.h" +#include "rcar-gen2.h" #include "r8a7790.h" static struct rcar_sysc_ch r8a7790_ca15_scu = { @@ -54,7 +55,7 @@ static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus) ARRAY_SIZE(r8a7790_apmu_config)); /* turn on power to SCU */ - r8a7790_pm_init(); + rcar_gen2_pm_init(); rcar_sysc_power_up(&r8a7790_ca15_scu); rcar_sysc_power_up(&r8a7790_ca7_scu); } diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c index 7e49e0a52e32..6658682d5c9e 100644 --- a/arch/arm/mach-shmobile/smp-r8a7791.c +++ b/arch/arm/mach-shmobile/smp-r8a7791.c @@ -39,7 +39,7 @@ static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus) r8a7791_apmu_config, ARRAY_SIZE(r8a7791_apmu_config)); - r8a7791_pm_init(); + rcar_gen2_pm_init(); } static int r8a7791_smp_boot_secondary(unsigned int cpu, diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 38d875d0e4c8..caefe806db5e 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -272,14 +272,6 @@ config GPIO_MPC8XXX Say Y here if you're going to use hardware that connects to the MPC512x/831x/834x/837x/8572/8610 GPIOs. -config GPIO_MSM_V1 - tristate "Qualcomm MSM GPIO v1" - depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50) - help - Say yes here to support the GPIO interface on ARM v6 based - Qualcomm MSM chips. Most of the pins on the MSM can be - selected for GPIO, and are controlled by this driver. - config GPIO_MSM_V2 tristate "Qualcomm MSM GPIO v2" depends on GPIOLIB && OF && ARCH_QCOM diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 07b816b9b630..f71bb971329c 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -60,7 +60,6 @@ obj-$(CONFIG_GPIO_MOXART) += gpio-moxart.o obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o -obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o diff --git a/drivers/gpio/gpio-msm-v1.c b/drivers/gpio/gpio-msm-v1.c deleted file mode 100644 index edf285e26667..000000000000 --- a/drivers/gpio/gpio-msm-v1.c +++ /dev/null @@ -1,714 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/bitops.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/err.h> - -#include <mach/msm_gpiomux.h> - -/* see 80-VA736-2 Rev C pp 695-751 -** -** These are actually the *shadow* gpio registers, since the -** real ones (which allow full access) are only available to the -** ARM9 side of the world. -** -** Since the _BASE need to be page-aligned when we're mapping them -** to virtual addresses, adjust for the additional offset in these -** macros. -*/ - -#define MSM_GPIO1_REG(off) (off) -#define MSM_GPIO2_REG(off) (off) -#define MSM_GPIO1_SHADOW_REG(off) (off) -#define MSM_GPIO2_SHADOW_REG(off) (off) - -/* - * MSM7X00 registers - */ -/* output value */ -#define MSM7X00_GPIO_OUT_0 MSM_GPIO1_SHADOW_REG(0x00) /* gpio 15-0 */ -#define MSM7X00_GPIO_OUT_1 MSM_GPIO2_SHADOW_REG(0x00) /* gpio 42-16 */ -#define MSM7X00_GPIO_OUT_2 MSM_GPIO1_SHADOW_REG(0x04) /* gpio 67-43 */ -#define MSM7X00_GPIO_OUT_3 MSM_GPIO1_SHADOW_REG(0x08) /* gpio 94-68 */ -#define MSM7X00_GPIO_OUT_4 MSM_GPIO1_SHADOW_REG(0x0C) /* gpio 106-95 */ -#define MSM7X00_GPIO_OUT_5 MSM_GPIO1_SHADOW_REG(0x50) /* gpio 107-121 */ - -/* same pin map as above, output enable */ -#define MSM7X00_GPIO_OE_0 MSM_GPIO1_SHADOW_REG(0x10) -#define MSM7X00_GPIO_OE_1 MSM_GPIO2_SHADOW_REG(0x08) -#define MSM7X00_GPIO_OE_2 MSM_GPIO1_SHADOW_REG(0x14) -#define MSM7X00_GPIO_OE_3 MSM_GPIO1_SHADOW_REG(0x18) -#define MSM7X00_GPIO_OE_4 MSM_GPIO1_SHADOW_REG(0x1C) -#define MSM7X00_GPIO_OE_5 MSM_GPIO1_SHADOW_REG(0x54) - -/* same pin map as above, input read */ -#define MSM7X00_GPIO_IN_0 MSM_GPIO1_SHADOW_REG(0x34) -#define MSM7X00_GPIO_IN_1 MSM_GPIO2_SHADOW_REG(0x20) -#define MSM7X00_GPIO_IN_2 MSM_GPIO1_SHADOW_REG(0x38) -#define MSM7X00_GPIO_IN_3 MSM_GPIO1_SHADOW_REG(0x3C) -#define MSM7X00_GPIO_IN_4 MSM_GPIO1_SHADOW_REG(0x40) -#define MSM7X00_GPIO_IN_5 MSM_GPIO1_SHADOW_REG(0x44) - -/* same pin map as above, 1=edge 0=level interrup */ -#define MSM7X00_GPIO_INT_EDGE_0 MSM_GPIO1_SHADOW_REG(0x60) -#define MSM7X00_GPIO_INT_EDGE_1 MSM_GPIO2_SHADOW_REG(0x50) -#define MSM7X00_GPIO_INT_EDGE_2 MSM_GPIO1_SHADOW_REG(0x64) -#define MSM7X00_GPIO_INT_EDGE_3 MSM_GPIO1_SHADOW_REG(0x68) -#define MSM7X00_GPIO_INT_EDGE_4 MSM_GPIO1_SHADOW_REG(0x6C) -#define MSM7X00_GPIO_INT_EDGE_5 MSM_GPIO1_SHADOW_REG(0xC0) - -/* same pin map as above, 1=positive 0=negative */ -#define MSM7X00_GPIO_INT_POS_0 MSM_GPIO1_SHADOW_REG(0x70) -#define MSM7X00_GPIO_INT_POS_1 MSM_GPIO2_SHADOW_REG(0x58) -#define MSM7X00_GPIO_INT_POS_2 MSM_GPIO1_SHADOW_REG(0x74) -#define MSM7X00_GPIO_INT_POS_3 MSM_GPIO1_SHADOW_REG(0x78) -#define MSM7X00_GPIO_INT_POS_4 MSM_GPIO1_SHADOW_REG(0x7C) -#define MSM7X00_GPIO_INT_POS_5 MSM_GPIO1_SHADOW_REG(0xBC) - -/* same pin map as above, interrupt enable */ -#define MSM7X00_GPIO_INT_EN_0 MSM_GPIO1_SHADOW_REG(0x80) -#define MSM7X00_GPIO_INT_EN_1 MSM_GPIO2_SHADOW_REG(0x60) -#define MSM7X00_GPIO_INT_EN_2 MSM_GPIO1_SHADOW_REG(0x84) -#define MSM7X00_GPIO_INT_EN_3 MSM_GPIO1_SHADOW_REG(0x88) -#define MSM7X00_GPIO_INT_EN_4 MSM_GPIO1_SHADOW_REG(0x8C) -#define MSM7X00_GPIO_INT_EN_5 MSM_GPIO1_SHADOW_REG(0xB8) - -/* same pin map as above, write 1 to clear interrupt */ -#define MSM7X00_GPIO_INT_CLEAR_0 MSM_GPIO1_SHADOW_REG(0x90) -#define MSM7X00_GPIO_INT_CLEAR_1 MSM_GPIO2_SHADOW_REG(0x68) -#define MSM7X00_GPIO_INT_CLEAR_2 MSM_GPIO1_SHADOW_REG(0x94) -#define MSM7X00_GPIO_INT_CLEAR_3 MSM_GPIO1_SHADOW_REG(0x98) -#define MSM7X00_GPIO_INT_CLEAR_4 MSM_GPIO1_SHADOW_REG(0x9C) -#define MSM7X00_GPIO_INT_CLEAR_5 MSM_GPIO1_SHADOW_REG(0xB4) - -/* same pin map as above, 1=interrupt pending */ -#define MSM7X00_GPIO_INT_STATUS_0 MSM_GPIO1_SHADOW_REG(0xA0) -#define MSM7X00_GPIO_INT_STATUS_1 MSM_GPIO2_SHADOW_REG(0x70) -#define MSM7X00_GPIO_INT_STATUS_2 MSM_GPIO1_SHADOW_REG(0xA4) -#define MSM7X00_GPIO_INT_STATUS_3 MSM_GPIO1_SHADOW_REG(0xA8) -#define MSM7X00_GPIO_INT_STATUS_4 MSM_GPIO1_SHADOW_REG(0xAC) -#define MSM7X00_GPIO_INT_STATUS_5 MSM_GPIO1_SHADOW_REG(0xB0) - -/* - * QSD8X50 registers - */ -/* output value */ -#define QSD8X50_GPIO_OUT_0 MSM_GPIO1_SHADOW_REG(0x00) /* gpio 15-0 */ -#define QSD8X50_GPIO_OUT_1 MSM_GPIO2_SHADOW_REG(0x00) /* gpio 42-16 */ -#define QSD8X50_GPIO_OUT_2 MSM_GPIO1_SHADOW_REG(0x04) /* gpio 67-43 */ -#define QSD8X50_GPIO_OUT_3 MSM_GPIO1_SHADOW_REG(0x08) /* gpio 94-68 */ -#define QSD8X50_GPIO_OUT_4 MSM_GPIO1_SHADOW_REG(0x0C) /* gpio 103-95 */ -#define QSD8X50_GPIO_OUT_5 MSM_GPIO1_SHADOW_REG(0x10) /* gpio 121-104 */ -#define QSD8X50_GPIO_OUT_6 MSM_GPIO1_SHADOW_REG(0x14) /* gpio 152-122 */ -#define QSD8X50_GPIO_OUT_7 MSM_GPIO1_SHADOW_REG(0x18) /* gpio 164-153 */ - -/* same pin map as above, output enable */ -#define QSD8X50_GPIO_OE_0 MSM_GPIO1_SHADOW_REG(0x20) -#define QSD8X50_GPIO_OE_1 MSM_GPIO2_SHADOW_REG(0x08) -#define QSD8X50_GPIO_OE_2 MSM_GPIO1_SHADOW_REG(0x24) -#define QSD8X50_GPIO_OE_3 MSM_GPIO1_SHADOW_REG(0x28) -#define QSD8X50_GPIO_OE_4 MSM_GPIO1_SHADOW_REG(0x2C) -#define QSD8X50_GPIO_OE_5 MSM_GPIO1_SHADOW_REG(0x30) -#define QSD8X50_GPIO_OE_6 MSM_GPIO1_SHADOW_REG(0x34) -#define QSD8X50_GPIO_OE_7 MSM_GPIO1_SHADOW_REG(0x38) - -/* same pin map as above, input read */ -#define QSD8X50_GPIO_IN_0 MSM_GPIO1_SHADOW_REG(0x50) -#define QSD8X50_GPIO_IN_1 MSM_GPIO2_SHADOW_REG(0x20) -#define QSD8X50_GPIO_IN_2 MSM_GPIO1_SHADOW_REG(0x54) -#define QSD8X50_GPIO_IN_3 MSM_GPIO1_SHADOW_REG(0x58) -#define QSD8X50_GPIO_IN_4 MSM_GPIO1_SHADOW_REG(0x5C) -#define QSD8X50_GPIO_IN_5 MSM_GPIO1_SHADOW_REG(0x60) -#define QSD8X50_GPIO_IN_6 MSM_GPIO1_SHADOW_REG(0x64) -#define QSD8X50_GPIO_IN_7 MSM_GPIO1_SHADOW_REG(0x68) - -/* same pin map as above, 1=edge 0=level interrup */ -#define QSD8X50_GPIO_INT_EDGE_0 MSM_GPIO1_SHADOW_REG(0x70) -#define QSD8X50_GPIO_INT_EDGE_1 MSM_GPIO2_SHADOW_REG(0x50) -#define QSD8X50_GPIO_INT_EDGE_2 MSM_GPIO1_SHADOW_REG(0x74) -#define QSD8X50_GPIO_INT_EDGE_3 MSM_GPIO1_SHADOW_REG(0x78) -#define QSD8X50_GPIO_INT_EDGE_4 MSM_GPIO1_SHADOW_REG(0x7C) -#define QSD8X50_GPIO_INT_EDGE_5 MSM_GPIO1_SHADOW_REG(0x80) -#define QSD8X50_GPIO_INT_EDGE_6 MSM_GPIO1_SHADOW_REG(0x84) -#define QSD8X50_GPIO_INT_EDGE_7 MSM_GPIO1_SHADOW_REG(0x88) - -/* same pin map as above, 1=positive 0=negative */ -#define QSD8X50_GPIO_INT_POS_0 MSM_GPIO1_SHADOW_REG(0x90) -#define QSD8X50_GPIO_INT_POS_1 MSM_GPIO2_SHADOW_REG(0x58) -#define QSD8X50_GPIO_INT_POS_2 MSM_GPIO1_SHADOW_REG(0x94) -#define QSD8X50_GPIO_INT_POS_3 MSM_GPIO1_SHADOW_REG(0x98) -#define QSD8X50_GPIO_INT_POS_4 MSM_GPIO1_SHADOW_REG(0x9C) -#define QSD8X50_GPIO_INT_POS_5 MSM_GPIO1_SHADOW_REG(0xA0) -#define QSD8X50_GPIO_INT_POS_6 MSM_GPIO1_SHADOW_REG(0xA4) -#define QSD8X50_GPIO_INT_POS_7 MSM_GPIO1_SHADOW_REG(0xA8) - -/* same pin map as above, interrupt enable */ -#define QSD8X50_GPIO_INT_EN_0 MSM_GPIO1_SHADOW_REG(0xB0) -#define QSD8X50_GPIO_INT_EN_1 MSM_GPIO2_SHADOW_REG(0x60) -#define QSD8X50_GPIO_INT_EN_2 MSM_GPIO1_SHADOW_REG(0xB4) -#define QSD8X50_GPIO_INT_EN_3 MSM_GPIO1_SHADOW_REG(0xB8) -#define QSD8X50_GPIO_INT_EN_4 MSM_GPIO1_SHADOW_REG(0xBC) -#define QSD8X50_GPIO_INT_EN_5 MSM_GPIO1_SHADOW_REG(0xC0) -#define QSD8X50_GPIO_INT_EN_6 MSM_GPIO1_SHADOW_REG(0xC4) -#define QSD8X50_GPIO_INT_EN_7 MSM_GPIO1_SHADOW_REG(0xC8) - -/* same pin map as above, write 1 to clear interrupt */ -#define QSD8X50_GPIO_INT_CLEAR_0 MSM_GPIO1_SHADOW_REG(0xD0) -#define QSD8X50_GPIO_INT_CLEAR_1 MSM_GPIO2_SHADOW_REG(0x68) -#define QSD8X50_GPIO_INT_CLEAR_2 MSM_GPIO1_SHADOW_REG(0xD4) -#define QSD8X50_GPIO_INT_CLEAR_3 MSM_GPIO1_SHADOW_REG(0xD8) -#define QSD8X50_GPIO_INT_CLEAR_4 MSM_GPIO1_SHADOW_REG(0xDC) -#define QSD8X50_GPIO_INT_CLEAR_5 MSM_GPIO1_SHADOW_REG(0xE0) -#define QSD8X50_GPIO_INT_CLEAR_6 MSM_GPIO1_SHADOW_REG(0xE4) -#define QSD8X50_GPIO_INT_CLEAR_7 MSM_GPIO1_SHADOW_REG(0xE8) - -/* same pin map as above, 1=interrupt pending */ -#define QSD8X50_GPIO_INT_STATUS_0 MSM_GPIO1_SHADOW_REG(0xF0) -#define QSD8X50_GPIO_INT_STATUS_1 MSM_GPIO2_SHADOW_REG(0x70) -#define QSD8X50_GPIO_INT_STATUS_2 MSM_GPIO1_SHADOW_REG(0xF4) -#define QSD8X50_GPIO_INT_STATUS_3 MSM_GPIO1_SHADOW_REG(0xF8) -#define QSD8X50_GPIO_INT_STATUS_4 MSM_GPIO1_SHADOW_REG(0xFC) -#define QSD8X50_GPIO_INT_STATUS_5 MSM_GPIO1_SHADOW_REG(0x100) -#define QSD8X50_GPIO_INT_STATUS_6 MSM_GPIO1_SHADOW_REG(0x104) -#define QSD8X50_GPIO_INT_STATUS_7 MSM_GPIO1_SHADOW_REG(0x108) - -/* - * MSM7X30 registers - */ -/* output value */ -#define MSM7X30_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */ -#define MSM7X30_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 43-16 */ -#define MSM7X30_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-44 */ -#define MSM7X30_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */ -#define MSM7X30_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 106-95 */ -#define MSM7X30_GPIO_OUT_5 MSM_GPIO1_REG(0x50) /* gpio 133-107 */ -#define MSM7X30_GPIO_OUT_6 MSM_GPIO1_REG(0xC4) /* gpio 150-134 */ -#define MSM7X30_GPIO_OUT_7 MSM_GPIO1_REG(0x214) /* gpio 181-151 */ - -/* same pin map as above, output enable */ -#define MSM7X30_GPIO_OE_0 MSM_GPIO1_REG(0x10) -#define MSM7X30_GPIO_OE_1 MSM_GPIO2_REG(0x08) -#define MSM7X30_GPIO_OE_2 MSM_GPIO1_REG(0x14) -#define MSM7X30_GPIO_OE_3 MSM_GPIO1_REG(0x18) -#define MSM7X30_GPIO_OE_4 MSM_GPIO1_REG(0x1C) -#define MSM7X30_GPIO_OE_5 MSM_GPIO1_REG(0x54) -#define MSM7X30_GPIO_OE_6 MSM_GPIO1_REG(0xC8) -#define MSM7X30_GPIO_OE_7 MSM_GPIO1_REG(0x218) - -/* same pin map as above, input read */ -#define MSM7X30_GPIO_IN_0 MSM_GPIO1_REG(0x34) -#define MSM7X30_GPIO_IN_1 MSM_GPIO2_REG(0x20) -#define MSM7X30_GPIO_IN_2 MSM_GPIO1_REG(0x38) -#define MSM7X30_GPIO_IN_3 MSM_GPIO1_REG(0x3C) -#define MSM7X30_GPIO_IN_4 MSM_GPIO1_REG(0x40) -#define MSM7X30_GPIO_IN_5 MSM_GPIO1_REG(0x44) -#define MSM7X30_GPIO_IN_6 MSM_GPIO1_REG(0xCC) -#define MSM7X30_GPIO_IN_7 MSM_GPIO1_REG(0x21C) - -/* same pin map as above, 1=edge 0=level interrup */ -#define MSM7X30_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x60) -#define MSM7X30_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50) -#define MSM7X30_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x64) -#define MSM7X30_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x68) -#define MSM7X30_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x6C) -#define MSM7X30_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0xC0) -#define MSM7X30_GPIO_INT_EDGE_6 MSM_GPIO1_REG(0xD0) -#define MSM7X30_GPIO_INT_EDGE_7 MSM_GPIO1_REG(0x240) - -/* same pin map as above, 1=positive 0=negative */ -#define MSM7X30_GPIO_INT_POS_0 MSM_GPIO1_REG(0x70) -#define MSM7X30_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58) -#define MSM7X30_GPIO_INT_POS_2 MSM_GPIO1_REG(0x74) -#define MSM7X30_GPIO_INT_POS_3 MSM_GPIO1_REG(0x78) -#define MSM7X30_GPIO_INT_POS_4 MSM_GPIO1_REG(0x7C) -#define MSM7X30_GPIO_INT_POS_5 MSM_GPIO1_REG(0xBC) -#define MSM7X30_GPIO_INT_POS_6 MSM_GPIO1_REG(0xD4) -#define MSM7X30_GPIO_INT_POS_7 MSM_GPIO1_REG(0x228) - -/* same pin map as above, interrupt enable */ -#define MSM7X30_GPIO_INT_EN_0 MSM_GPIO1_REG(0x80) -#define MSM7X30_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60) -#define MSM7X30_GPIO_INT_EN_2 MSM_GPIO1_REG(0x84) -#define MSM7X30_GPIO_INT_EN_3 MSM_GPIO1_REG(0x88) -#define MSM7X30_GPIO_INT_EN_4 MSM_GPIO1_REG(0x8C) -#define MSM7X30_GPIO_INT_EN_5 MSM_GPIO1_REG(0xB8) -#define MSM7X30_GPIO_INT_EN_6 MSM_GPIO1_REG(0xD8) -#define MSM7X30_GPIO_INT_EN_7 MSM_GPIO1_REG(0x22C) - -/* same pin map as above, write 1 to clear interrupt */ -#define MSM7X30_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0x90) -#define MSM7X30_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68) -#define MSM7X30_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0x94) -#define MSM7X30_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0x98) -#define MSM7X30_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0x9C) -#define MSM7X30_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xB4) -#define MSM7X30_GPIO_INT_CLEAR_6 MSM_GPIO1_REG(0xDC) -#define MSM7X30_GPIO_INT_CLEAR_7 MSM_GPIO1_REG(0x230) - -/* same pin map as above, 1=interrupt pending */ -#define MSM7X30_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xA0) -#define MSM7X30_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70) -#define MSM7X30_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xA4) -#define MSM7X30_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xA8) -#define MSM7X30_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xAC) -#define MSM7X30_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0xB0) -#define MSM7X30_GPIO_INT_STATUS_6 MSM_GPIO1_REG(0xE0) -#define MSM7X30_GPIO_INT_STATUS_7 MSM_GPIO1_REG(0x234) - -#define FIRST_GPIO_IRQ MSM_GPIO_TO_INT(0) - -#define MSM_GPIO_BANK(soc, bank, first, last) \ - { \ - .regs[MSM_GPIO_OUT] = soc##_GPIO_OUT_##bank, \ - .regs[MSM_GPIO_IN] = soc##_GPIO_IN_##bank, \ - .regs[MSM_GPIO_INT_STATUS] = soc##_GPIO_INT_STATUS_##bank, \ - .regs[MSM_GPIO_INT_CLEAR] = soc##_GPIO_INT_CLEAR_##bank, \ - .regs[MSM_GPIO_INT_EN] = soc##_GPIO_INT_EN_##bank, \ - .regs[MSM_GPIO_INT_EDGE] = soc##_GPIO_INT_EDGE_##bank, \ - .regs[MSM_GPIO_INT_POS] = soc##_GPIO_INT_POS_##bank, \ - .regs[MSM_GPIO_OE] = soc##_GPIO_OE_##bank, \ - .chip = { \ - .base = (first), \ - .ngpio = (last) - (first) + 1, \ - .get = msm_gpio_get, \ - .set = msm_gpio_set, \ - .direction_input = msm_gpio_direction_input, \ - .direction_output = msm_gpio_direction_output, \ - .to_irq = msm_gpio_to_irq, \ - .request = msm_gpio_request, \ - .free = msm_gpio_free, \ - } \ - } - -#define MSM_GPIO_BROKEN_INT_CLEAR 1 - -enum msm_gpio_reg { - MSM_GPIO_IN, - MSM_GPIO_OUT, - MSM_GPIO_INT_STATUS, - MSM_GPIO_INT_CLEAR, - MSM_GPIO_INT_EN, - MSM_GPIO_INT_EDGE, - MSM_GPIO_INT_POS, - MSM_GPIO_OE, - MSM_GPIO_REG_NR -}; - -struct msm_gpio_chip { - spinlock_t lock; - struct gpio_chip chip; - unsigned long regs[MSM_GPIO_REG_NR]; -#if MSM_GPIO_BROKEN_INT_CLEAR - unsigned int_status_copy; -#endif - unsigned int both_edge_detect; - unsigned int int_enable[2]; /* 0: awake, 1: sleep */ - void __iomem *base; -}; - -struct msm_gpio_initdata { - struct msm_gpio_chip *chips; - int count; -}; - -static void msm_gpio_writel(struct msm_gpio_chip *chip, u32 val, - enum msm_gpio_reg reg) -{ - writel(val, chip->base + chip->regs[reg]); -} - -static u32 msm_gpio_readl(struct msm_gpio_chip *chip, enum msm_gpio_reg reg) -{ - return readl(chip->base + chip->regs[reg]); -} - -static int msm_gpio_write(struct msm_gpio_chip *msm_chip, - unsigned offset, unsigned on) -{ - unsigned mask = BIT(offset); - unsigned val; - - val = msm_gpio_readl(msm_chip, MSM_GPIO_OUT); - if (on) - msm_gpio_writel(msm_chip, val | mask, MSM_GPIO_OUT); - else - msm_gpio_writel(msm_chip, val & ~mask, MSM_GPIO_OUT); - return 0; -} - -static void msm_gpio_update_both_edge_detect(struct msm_gpio_chip *msm_chip) -{ - int loop_limit = 100; - unsigned pol, val, val2, intstat; - do { - val = msm_gpio_readl(msm_chip, MSM_GPIO_IN); - pol = msm_gpio_readl(msm_chip, MSM_GPIO_INT_POS); - pol = (pol & ~msm_chip->both_edge_detect) | - (~val & msm_chip->both_edge_detect); - msm_gpio_writel(msm_chip, pol, MSM_GPIO_INT_POS); - intstat = msm_gpio_readl(msm_chip, MSM_GPIO_INT_STATUS); - val2 = msm_gpio_readl(msm_chip, MSM_GPIO_IN); - if (((val ^ val2) & msm_chip->both_edge_detect & ~intstat) == 0) - return; - } while (loop_limit-- > 0); - printk(KERN_ERR "msm_gpio_update_both_edge_detect, " - "failed to reach stable state %x != %x\n", val, val2); -} - -static int msm_gpio_clear_detect_status(struct msm_gpio_chip *msm_chip, - unsigned offset) -{ - unsigned bit = BIT(offset); - -#if MSM_GPIO_BROKEN_INT_CLEAR - /* Save interrupts that already triggered before we loose them. */ - /* Any interrupt that triggers between the read of int_status */ - /* and the write to int_clear will still be lost though. */ - msm_chip->int_status_copy |= - msm_gpio_readl(msm_chip, MSM_GPIO_INT_STATUS); - msm_chip->int_status_copy &= ~bit; -#endif - msm_gpio_writel(msm_chip, bit, MSM_GPIO_INT_CLEAR); - msm_gpio_update_both_edge_detect(msm_chip); - return 0; -} - -static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - struct msm_gpio_chip *msm_chip; - unsigned long irq_flags; - u32 val; - - msm_chip = container_of(chip, struct msm_gpio_chip, chip); - spin_lock_irqsave(&msm_chip->lock, irq_flags); - val = msm_gpio_readl(msm_chip, MSM_GPIO_OE) & ~BIT(offset); - msm_gpio_writel(msm_chip, val, MSM_GPIO_OE); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); - return 0; -} - -static int -msm_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value) -{ - struct msm_gpio_chip *msm_chip; - unsigned long irq_flags; - u32 val; - - msm_chip = container_of(chip, struct msm_gpio_chip, chip); - spin_lock_irqsave(&msm_chip->lock, irq_flags); - msm_gpio_write(msm_chip, offset, value); - val = msm_gpio_readl(msm_chip, MSM_GPIO_OE) | BIT(offset); - msm_gpio_writel(msm_chip, val, MSM_GPIO_OE); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); - return 0; -} - -static int msm_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct msm_gpio_chip *msm_chip; - - msm_chip = container_of(chip, struct msm_gpio_chip, chip); - return (msm_gpio_readl(msm_chip, MSM_GPIO_IN) & (1U << offset)) ? 1 : 0; -} - -static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct msm_gpio_chip *msm_chip; - unsigned long irq_flags; - - msm_chip = container_of(chip, struct msm_gpio_chip, chip); - spin_lock_irqsave(&msm_chip->lock, irq_flags); - msm_gpio_write(msm_chip, offset, value); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); -} - -static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - return MSM_GPIO_TO_INT(chip->base + offset); -} - -#ifdef CONFIG_MSM_GPIOMUX -static int msm_gpio_request(struct gpio_chip *chip, unsigned offset) -{ - return msm_gpiomux_get(chip->base + offset); -} - -static void msm_gpio_free(struct gpio_chip *chip, unsigned offset) -{ - msm_gpiomux_put(chip->base + offset); -} -#else -#define msm_gpio_request NULL -#define msm_gpio_free NULL -#endif - -static struct msm_gpio_chip *msm_gpio_chips; -static int msm_gpio_count; - -static struct msm_gpio_chip msm_gpio_chips_msm7x01[] = { - MSM_GPIO_BANK(MSM7X00, 0, 0, 15), - MSM_GPIO_BANK(MSM7X00, 1, 16, 42), - MSM_GPIO_BANK(MSM7X00, 2, 43, 67), - MSM_GPIO_BANK(MSM7X00, 3, 68, 94), - MSM_GPIO_BANK(MSM7X00, 4, 95, 106), - MSM_GPIO_BANK(MSM7X00, 5, 107, 121), -}; - -static struct msm_gpio_initdata msm_gpio_7x01_init = { - .chips = msm_gpio_chips_msm7x01, - .count = ARRAY_SIZE(msm_gpio_chips_msm7x01), -}; - -static struct msm_gpio_chip msm_gpio_chips_msm7x30[] = { - MSM_GPIO_BANK(MSM7X30, 0, 0, 15), - MSM_GPIO_BANK(MSM7X30, 1, 16, 43), - MSM_GPIO_BANK(MSM7X30, 2, 44, 67), - MSM_GPIO_BANK(MSM7X30, 3, 68, 94), - MSM_GPIO_BANK(MSM7X30, 4, 95, 106), - MSM_GPIO_BANK(MSM7X30, 5, 107, 133), - MSM_GPIO_BANK(MSM7X30, 6, 134, 150), - MSM_GPIO_BANK(MSM7X30, 7, 151, 181), -}; - -static struct msm_gpio_initdata msm_gpio_7x30_init = { - .chips = msm_gpio_chips_msm7x30, - .count = ARRAY_SIZE(msm_gpio_chips_msm7x30), -}; - -static struct msm_gpio_chip msm_gpio_chips_qsd8x50[] = { - MSM_GPIO_BANK(QSD8X50, 0, 0, 15), - MSM_GPIO_BANK(QSD8X50, 1, 16, 42), - MSM_GPIO_BANK(QSD8X50, 2, 43, 67), - MSM_GPIO_BANK(QSD8X50, 3, 68, 94), - MSM_GPIO_BANK(QSD8X50, 4, 95, 103), - MSM_GPIO_BANK(QSD8X50, 5, 104, 121), - MSM_GPIO_BANK(QSD8X50, 6, 122, 152), - MSM_GPIO_BANK(QSD8X50, 7, 153, 164), -}; - -static struct msm_gpio_initdata msm_gpio_8x50_init = { - .chips = msm_gpio_chips_qsd8x50, - .count = ARRAY_SIZE(msm_gpio_chips_qsd8x50), -}; - -static void msm_gpio_irq_ack(struct irq_data *d) -{ - unsigned long irq_flags; - struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d); - spin_lock_irqsave(&msm_chip->lock, irq_flags); - msm_gpio_clear_detect_status(msm_chip, - d->irq - gpio_to_irq(msm_chip->chip.base)); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); -} - -static void msm_gpio_irq_mask(struct irq_data *d) -{ - unsigned long irq_flags; - struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d); - unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base); - - spin_lock_irqsave(&msm_chip->lock, irq_flags); - /* level triggered interrupts are also latched */ - if (!(msm_gpio_readl(msm_chip, MSM_GPIO_INT_EDGE) & BIT(offset))) - msm_gpio_clear_detect_status(msm_chip, offset); - msm_chip->int_enable[0] &= ~BIT(offset); - msm_gpio_writel(msm_chip, msm_chip->int_enable[0], MSM_GPIO_INT_EN); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); -} - -static void msm_gpio_irq_unmask(struct irq_data *d) -{ - unsigned long irq_flags; - struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d); - unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base); - - spin_lock_irqsave(&msm_chip->lock, irq_flags); - /* level triggered interrupts are also latched */ - if (!(msm_gpio_readl(msm_chip, MSM_GPIO_INT_EDGE) & BIT(offset))) - msm_gpio_clear_detect_status(msm_chip, offset); - msm_chip->int_enable[0] |= BIT(offset); - msm_gpio_writel(msm_chip, msm_chip->int_enable[0], MSM_GPIO_INT_EN); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); -} - -static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on) -{ - unsigned long irq_flags; - struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d); - unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base); - - spin_lock_irqsave(&msm_chip->lock, irq_flags); - - if (on) - msm_chip->int_enable[1] |= BIT(offset); - else - msm_chip->int_enable[1] &= ~BIT(offset); - - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); - return 0; -} - -static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int flow_type) -{ - unsigned long irq_flags; - struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d); - unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base); - unsigned val, mask = BIT(offset); - - spin_lock_irqsave(&msm_chip->lock, irq_flags); - val = msm_gpio_readl(msm_chip, MSM_GPIO_INT_EDGE); - if (flow_type & IRQ_TYPE_EDGE_BOTH) { - msm_gpio_writel(msm_chip, val | mask, MSM_GPIO_INT_EDGE); - __irq_set_handler_locked(d->irq, handle_edge_irq); - } else { - msm_gpio_writel(msm_chip, val & ~mask, MSM_GPIO_INT_EDGE); - __irq_set_handler_locked(d->irq, handle_level_irq); - } - if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { - msm_chip->both_edge_detect |= mask; - msm_gpio_update_both_edge_detect(msm_chip); - } else { - msm_chip->both_edge_detect &= ~mask; - val = msm_gpio_readl(msm_chip, MSM_GPIO_INT_POS); - if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH)) - val |= mask; - else - val &= ~mask; - msm_gpio_writel(msm_chip, val, MSM_GPIO_INT_POS); - } - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); - return 0; -} - -static void msm_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - int i, j, mask; - unsigned val; - - for (i = 0; i < msm_gpio_count; i++) { - struct msm_gpio_chip *msm_chip = &msm_gpio_chips[i]; - val = msm_gpio_readl(msm_chip, MSM_GPIO_INT_STATUS); - val &= msm_chip->int_enable[0]; - while (val) { - mask = val & -val; - j = fls(mask) - 1; - /* printk("%s %08x %08x bit %d gpio %d irq %d\n", - __func__, v, m, j, msm_chip->chip.start + j, - FIRST_GPIO_IRQ + msm_chip->chip.start + j); */ - val &= ~mask; - generic_handle_irq(FIRST_GPIO_IRQ + - msm_chip->chip.base + j); - } - } - desc->irq_data.chip->irq_ack(&desc->irq_data); -} - -static struct irq_chip msm_gpio_irq_chip = { - .name = "msmgpio", - .irq_ack = msm_gpio_irq_ack, - .irq_mask = msm_gpio_irq_mask, - .irq_unmask = msm_gpio_irq_unmask, - .irq_set_wake = msm_gpio_irq_set_wake, - .irq_set_type = msm_gpio_irq_set_type, -}; - -static int gpio_msm_v1_probe(struct platform_device *pdev) -{ - int i, j = 0; - const struct platform_device_id *dev_id = platform_get_device_id(pdev); - struct msm_gpio_initdata *data; - int irq1, irq2; - struct resource *res; - void __iomem *base1, __iomem *base2; - - data = (struct msm_gpio_initdata *)dev_id->driver_data; - msm_gpio_chips = data->chips; - msm_gpio_count = data->count; - - irq1 = platform_get_irq(pdev, 0); - if (irq1 < 0) - return irq1; - - irq2 = platform_get_irq(pdev, 1); - if (irq2 < 0) - return irq2; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base1 = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(base1)) - return PTR_ERR(base1); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - base2 = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(base2)) - return PTR_ERR(base2); - - for (i = FIRST_GPIO_IRQ; i < FIRST_GPIO_IRQ + NR_GPIO_IRQS; i++) { - if (i - FIRST_GPIO_IRQ >= - msm_gpio_chips[j].chip.base + - msm_gpio_chips[j].chip.ngpio) - j++; - irq_set_chip_data(i, &msm_gpio_chips[j]); - irq_set_chip_and_handler(i, &msm_gpio_irq_chip, - handle_edge_irq); - set_irq_flags(i, IRQF_VALID); - } - - for (i = 0; i < msm_gpio_count; i++) { - if (i == 1) - msm_gpio_chips[i].base = base2; - else - msm_gpio_chips[i].base = base1; - spin_lock_init(&msm_gpio_chips[i].lock); - msm_gpio_writel(&msm_gpio_chips[i], 0, MSM_GPIO_INT_EN); - gpiochip_add(&msm_gpio_chips[i].chip); - } - - irq_set_chained_handler(irq1, msm_gpio_irq_handler); - irq_set_chained_handler(irq2, msm_gpio_irq_handler); - irq_set_irq_wake(irq1, 1); - irq_set_irq_wake(irq2, 1); - return 0; -} - -static struct platform_device_id gpio_msm_v1_device_ids[] = { - { "gpio-msm-7201", (unsigned long)&msm_gpio_7x01_init }, - { "gpio-msm-7x30", (unsigned long)&msm_gpio_7x30_init }, - { "gpio-msm-8x50", (unsigned long)&msm_gpio_8x50_init }, - { } -}; -MODULE_DEVICE_TABLE(platform, gpio_msm_v1_device_ids); - -static struct platform_driver gpio_msm_v1_driver = { - .driver = { - .name = "gpio-msm-v1", - }, - .probe = gpio_msm_v1_probe, - .id_table = gpio_msm_v1_device_ids, -}; - -static int __init gpio_msm_v1_init(void) -{ - return platform_driver_register(&gpio_msm_v1_driver); -} -postcore_initcall(gpio_msm_v1_init); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 7f4db908f89b..b1f837e749fe 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -408,14 +408,6 @@ config MMC_SDHCI_MSM If unsure, say N. -config MMC_MSM - tristate "Qualcomm SDCC Controller Support" - depends on MMC && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50) - help - This provides support for the SD/MMC cell found in the - MSM and QSD SOCs from Qualcomm. The controller also has - support for SDIO devices. - config MMC_MXC tristate "Freescale i.MX21/27/31 or MPC512x Multimedia Card support" depends on ARCH_MXC || PPC_MPC512x diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 711e913450f5..e3ab5b968651 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -24,7 +24,6 @@ obj-$(CONFIG_MMC_OMAP) += omap.o obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o -obj-$(CONFIG_MMC_MSM) += msm_sdcc.o obj-$(CONFIG_MMC_MVSDIO) += mvsdio.o obj-$(CONFIG_MMC_DAVINCI) += davinci_mmc.o obj-$(CONFIG_MMC_GOLDFISH) += android-goldfish.o diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c deleted file mode 100644 index 90c60fd4ff6e..000000000000 --- a/drivers/mmc/host/msm_sdcc.c +++ /dev/null @@ -1,1474 +0,0 @@ -/* - * linux/drivers/mmc/host/msm_sdcc.c - Qualcomm MSM 7X00A SDCC Driver - * - * Copyright (C) 2007 Google Inc, - * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * Copyright (C) 2009, Code Aurora Forum. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Based on mmci.c - * - * Author: San Mehat (san@android.com) - * - */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/highmem.h> -#include <linux/log2.h> -#include <linux/mmc/host.h> -#include <linux/mmc/card.h> -#include <linux/mmc/sdio.h> -#include <linux/clk.h> -#include <linux/scatterlist.h> -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/debugfs.h> -#include <linux/io.h> -#include <linux/memory.h> -#include <linux/gfp.h> -#include <linux/gpio.h> - -#include <asm/cacheflush.h> -#include <asm/div64.h> -#include <asm/sizes.h> - -#include <linux/platform_data/mmc-msm_sdcc.h> -#include <mach/dma.h> -#include <mach/clk.h> - -#include "msm_sdcc.h" - -#define DRIVER_NAME "msm-sdcc" - -#define BUSCLK_PWRSAVE 1 -#define BUSCLK_TIMEOUT (HZ) -static unsigned int msmsdcc_fmin = 144000; -static unsigned int msmsdcc_fmax = 50000000; -static unsigned int msmsdcc_4bit = 1; -static unsigned int msmsdcc_pwrsave = 1; -static unsigned int msmsdcc_piopoll = 1; -static unsigned int msmsdcc_sdioirq; - -#define PIO_SPINMAX 30 -#define CMD_SPINMAX 20 - - -static inline void -msmsdcc_disable_clocks(struct msmsdcc_host *host, int deferr) -{ - WARN_ON(!host->clks_on); - - BUG_ON(host->curr.mrq); - - if (deferr) { - mod_timer(&host->busclk_timer, jiffies + BUSCLK_TIMEOUT); - } else { - del_timer_sync(&host->busclk_timer); - /* Need to check clks_on again in case the busclk - * timer fired - */ - if (host->clks_on) { - clk_disable(host->clk); - clk_disable(host->pclk); - host->clks_on = 0; - } - } -} - -static inline int -msmsdcc_enable_clocks(struct msmsdcc_host *host) -{ - int rc; - - del_timer_sync(&host->busclk_timer); - - if (!host->clks_on) { - rc = clk_enable(host->pclk); - if (rc) - return rc; - rc = clk_enable(host->clk); - if (rc) { - clk_disable(host->pclk); - return rc; - } - udelay(1 + ((3 * USEC_PER_SEC) / - (host->clk_rate ? host->clk_rate : msmsdcc_fmin))); - host->clks_on = 1; - } - return 0; -} - -static inline unsigned int -msmsdcc_readl(struct msmsdcc_host *host, unsigned int reg) -{ - return readl(host->base + reg); -} - -static inline void -msmsdcc_writel(struct msmsdcc_host *host, u32 data, unsigned int reg) -{ - writel(data, host->base + reg); - /* 3 clk delay required! */ - udelay(1 + ((3 * USEC_PER_SEC) / - (host->clk_rate ? host->clk_rate : msmsdcc_fmin))); -} - -static void -msmsdcc_start_command(struct msmsdcc_host *host, struct mmc_command *cmd, - u32 c); - -static void msmsdcc_reset_and_restore(struct msmsdcc_host *host) -{ - u32 mci_clk = 0; - u32 mci_mask0 = 0; - int ret = 0; - - /* Save the controller state */ - mci_clk = readl(host->base + MMCICLOCK); - mci_mask0 = readl(host->base + MMCIMASK0); - - /* Reset the controller */ - ret = clk_reset(host->clk, CLK_RESET_ASSERT); - if (ret) - pr_err("%s: Clock assert failed at %u Hz with err %d\n", - mmc_hostname(host->mmc), host->clk_rate, ret); - - ret = clk_reset(host->clk, CLK_RESET_DEASSERT); - if (ret) - pr_err("%s: Clock deassert failed at %u Hz with err %d\n", - mmc_hostname(host->mmc), host->clk_rate, ret); - - pr_info("%s: Controller has been re-initialiazed\n", - mmc_hostname(host->mmc)); - - /* Restore the contoller state */ - writel(host->pwr, host->base + MMCIPOWER); - writel(mci_clk, host->base + MMCICLOCK); - writel(mci_mask0, host->base + MMCIMASK0); - ret = clk_set_rate(host->clk, host->clk_rate); - if (ret) - pr_err("%s: Failed to set clk rate %u Hz (%d)\n", - mmc_hostname(host->mmc), host->clk_rate, ret); -} - -static void -msmsdcc_request_end(struct msmsdcc_host *host, struct mmc_request *mrq) -{ - BUG_ON(host->curr.data); - - host->curr.mrq = NULL; - host->curr.cmd = NULL; - - if (mrq->data) - mrq->data->bytes_xfered = host->curr.data_xfered; - if (mrq->cmd->error == -ETIMEDOUT) - mdelay(5); - -#if BUSCLK_PWRSAVE - msmsdcc_disable_clocks(host, 1); -#endif - /* - * Need to drop the host lock here; mmc_request_done may call - * back into the driver... - */ - spin_unlock(&host->lock); - mmc_request_done(host->mmc, mrq); - spin_lock(&host->lock); -} - -static void -msmsdcc_stop_data(struct msmsdcc_host *host) -{ - host->curr.data = NULL; - host->curr.got_dataend = 0; -} - -uint32_t msmsdcc_fifo_addr(struct msmsdcc_host *host) -{ - return host->memres->start + MMCIFIFO; -} - -static inline void -msmsdcc_start_command_exec(struct msmsdcc_host *host, u32 arg, u32 c) { - msmsdcc_writel(host, arg, MMCIARGUMENT); - msmsdcc_writel(host, c, MMCICOMMAND); -} - -static void -msmsdcc_dma_exec_func(struct msm_dmov_cmd *cmd) -{ - struct msmsdcc_host *host = (struct msmsdcc_host *)cmd->data; - - msmsdcc_writel(host, host->cmd_timeout, MMCIDATATIMER); - msmsdcc_writel(host, (unsigned int)host->curr.xfer_size, - MMCIDATALENGTH); - msmsdcc_writel(host, (msmsdcc_readl(host, MMCIMASK0) & - (~MCI_IRQ_PIO)) | host->cmd_pio_irqmask, MMCIMASK0); - msmsdcc_writel(host, host->cmd_datactrl, MMCIDATACTRL); - - if (host->cmd_cmd) { - msmsdcc_start_command_exec(host, - (u32) host->cmd_cmd->arg, - (u32) host->cmd_c); - } - host->dma.active = 1; -} - -static void -msmsdcc_dma_complete_tlet(unsigned long data) -{ - struct msmsdcc_host *host = (struct msmsdcc_host *)data; - unsigned long flags; - struct mmc_request *mrq; - struct msm_dmov_errdata err; - - spin_lock_irqsave(&host->lock, flags); - host->dma.active = 0; - - err = host->dma.err; - mrq = host->curr.mrq; - BUG_ON(!mrq); - WARN_ON(!mrq->data); - - if (!(host->dma.result & DMOV_RSLT_VALID)) { - pr_err("msmsdcc: Invalid DataMover result\n"); - goto out; - } - - if (host->dma.result & DMOV_RSLT_DONE) { - host->curr.data_xfered = host->curr.xfer_size; - } else { - /* Error or flush */ - if (host->dma.result & DMOV_RSLT_ERROR) - pr_err("%s: DMA error (0x%.8x)\n", - mmc_hostname(host->mmc), host->dma.result); - if (host->dma.result & DMOV_RSLT_FLUSH) - pr_err("%s: DMA channel flushed (0x%.8x)\n", - mmc_hostname(host->mmc), host->dma.result); - - pr_err("Flush data: %.8x %.8x %.8x %.8x %.8x %.8x\n", - err.flush[0], err.flush[1], err.flush[2], - err.flush[3], err.flush[4], err.flush[5]); - - msmsdcc_reset_and_restore(host); - if (!mrq->data->error) - mrq->data->error = -EIO; - } - dma_unmap_sg(mmc_dev(host->mmc), host->dma.sg, host->dma.num_ents, - host->dma.dir); - - host->dma.sg = NULL; - host->dma.busy = 0; - - if (host->curr.got_dataend || mrq->data->error) { - - /* - * If we've already gotten our DATAEND / DATABLKEND - * for this request, then complete it through here. - */ - msmsdcc_stop_data(host); - - if (!mrq->data->error) - host->curr.data_xfered = host->curr.xfer_size; - if (!mrq->data->stop || mrq->cmd->error) { - host->curr.mrq = NULL; - host->curr.cmd = NULL; - mrq->data->bytes_xfered = host->curr.data_xfered; - - spin_unlock_irqrestore(&host->lock, flags); -#if BUSCLK_PWRSAVE - msmsdcc_disable_clocks(host, 1); -#endif - mmc_request_done(host->mmc, mrq); - return; - } else - msmsdcc_start_command(host, mrq->data->stop, 0); - } - -out: - spin_unlock_irqrestore(&host->lock, flags); - return; -} - -static void -msmsdcc_dma_complete_func(struct msm_dmov_cmd *cmd, - unsigned int result, - struct msm_dmov_errdata *err) -{ - struct msmsdcc_dma_data *dma_data = - container_of(cmd, struct msmsdcc_dma_data, hdr); - struct msmsdcc_host *host = dma_data->host; - - dma_data->result = result; - if (err) - memcpy(&dma_data->err, err, sizeof(struct msm_dmov_errdata)); - - tasklet_schedule(&host->dma_tlet); -} - -static int validate_dma(struct msmsdcc_host *host, struct mmc_data *data) -{ - if (host->dma.channel == -1) - return -ENOENT; - - if ((data->blksz * data->blocks) < MCI_FIFOSIZE) - return -EINVAL; - if ((data->blksz * data->blocks) % MCI_FIFOSIZE) - return -EINVAL; - return 0; -} - -static int msmsdcc_config_dma(struct msmsdcc_host *host, struct mmc_data *data) -{ - struct msmsdcc_nc_dmadata *nc; - dmov_box *box; - uint32_t rows; - uint32_t crci; - unsigned int n; - int i, rc; - struct scatterlist *sg = data->sg; - - rc = validate_dma(host, data); - if (rc) - return rc; - - host->dma.sg = data->sg; - host->dma.num_ents = data->sg_len; - - BUG_ON(host->dma.num_ents > NR_SG); /* Prevent memory corruption */ - - nc = host->dma.nc; - - switch (host->pdev_id) { - case 1: - crci = MSMSDCC_CRCI_SDC1; - break; - case 2: - crci = MSMSDCC_CRCI_SDC2; - break; - case 3: - crci = MSMSDCC_CRCI_SDC3; - break; - case 4: - crci = MSMSDCC_CRCI_SDC4; - break; - default: - host->dma.sg = NULL; - host->dma.num_ents = 0; - return -ENOENT; - } - - if (data->flags & MMC_DATA_READ) - host->dma.dir = DMA_FROM_DEVICE; - else - host->dma.dir = DMA_TO_DEVICE; - - host->curr.user_pages = 0; - - box = &nc->cmd[0]; - - /* location of command block must be 64 bit aligned */ - BUG_ON(host->dma.cmd_busaddr & 0x07); - - nc->cmdptr = (host->dma.cmd_busaddr >> 3) | CMD_PTR_LP; - host->dma.hdr.cmdptr = DMOV_CMD_PTR_LIST | - DMOV_CMD_ADDR(host->dma.cmdptr_busaddr); - host->dma.hdr.complete_func = msmsdcc_dma_complete_func; - - n = dma_map_sg(mmc_dev(host->mmc), host->dma.sg, - host->dma.num_ents, host->dma.dir); - if (n == 0) { - pr_err("%s: Unable to map in all sg elements\n", - mmc_hostname(host->mmc)); - host->dma.sg = NULL; - host->dma.num_ents = 0; - return -ENOMEM; - } - - for_each_sg(host->dma.sg, sg, n, i) { - - box->cmd = CMD_MODE_BOX; - - if (i == n - 1) - box->cmd |= CMD_LC; - rows = (sg_dma_len(sg) % MCI_FIFOSIZE) ? - (sg_dma_len(sg) / MCI_FIFOSIZE) + 1 : - (sg_dma_len(sg) / MCI_FIFOSIZE) ; - - if (data->flags & MMC_DATA_READ) { - box->src_row_addr = msmsdcc_fifo_addr(host); - box->dst_row_addr = sg_dma_address(sg); - - box->src_dst_len = (MCI_FIFOSIZE << 16) | - (MCI_FIFOSIZE); - box->row_offset = MCI_FIFOSIZE; - - box->num_rows = rows * ((1 << 16) + 1); - box->cmd |= CMD_SRC_CRCI(crci); - } else { - box->src_row_addr = sg_dma_address(sg); - box->dst_row_addr = msmsdcc_fifo_addr(host); - - box->src_dst_len = (MCI_FIFOSIZE << 16) | - (MCI_FIFOSIZE); - box->row_offset = (MCI_FIFOSIZE << 16); - - box->num_rows = rows * ((1 << 16) + 1); - box->cmd |= CMD_DST_CRCI(crci); - } - box++; - } - - return 0; -} - -static int -snoop_cccr_abort(struct mmc_command *cmd) -{ - if ((cmd->opcode == 52) && - (cmd->arg & 0x80000000) && - (((cmd->arg >> 9) & 0x1ffff) == SDIO_CCCR_ABORT)) - return 1; - return 0; -} - -static void -msmsdcc_start_command_deferred(struct msmsdcc_host *host, - struct mmc_command *cmd, u32 *c) -{ - *c |= (cmd->opcode | MCI_CPSM_ENABLE); - - if (cmd->flags & MMC_RSP_PRESENT) { - if (cmd->flags & MMC_RSP_136) - *c |= MCI_CPSM_LONGRSP; - *c |= MCI_CPSM_RESPONSE; - } - - if (/*interrupt*/0) - *c |= MCI_CPSM_INTERRUPT; - - if ((((cmd->opcode == 17) || (cmd->opcode == 18)) || - ((cmd->opcode == 24) || (cmd->opcode == 25))) || - (cmd->opcode == 53)) - *c |= MCI_CSPM_DATCMD; - - if (host->prog_scan && (cmd->opcode == 12)) { - *c |= MCI_CPSM_PROGENA; - host->prog_enable = true; - } - - if (cmd == cmd->mrq->stop) - *c |= MCI_CSPM_MCIABORT; - - if (snoop_cccr_abort(cmd)) - *c |= MCI_CSPM_MCIABORT; - - if (host->curr.cmd != NULL) { - pr_err("%s: Overlapping command requests\n", - mmc_hostname(host->mmc)); - } - host->curr.cmd = cmd; -} - -static void -msmsdcc_start_data(struct msmsdcc_host *host, struct mmc_data *data, - struct mmc_command *cmd, u32 c) -{ - unsigned int datactrl, timeout; - unsigned long long clks; - unsigned int pio_irqmask = 0; - - host->curr.data = data; - host->curr.xfer_size = data->blksz * data->blocks; - host->curr.xfer_remain = host->curr.xfer_size; - host->curr.data_xfered = 0; - host->curr.got_dataend = 0; - - memset(&host->pio, 0, sizeof(host->pio)); - - datactrl = MCI_DPSM_ENABLE | (data->blksz << 4); - - if (!msmsdcc_config_dma(host, data)) - datactrl |= MCI_DPSM_DMAENABLE; - else { - host->pio.sg = data->sg; - host->pio.sg_len = data->sg_len; - host->pio.sg_off = 0; - - if (data->flags & MMC_DATA_READ) { - pio_irqmask = MCI_RXFIFOHALFFULLMASK; - if (host->curr.xfer_remain < MCI_FIFOSIZE) - pio_irqmask |= MCI_RXDATAAVLBLMASK; - } else - pio_irqmask = MCI_TXFIFOHALFEMPTYMASK; - } - - if (data->flags & MMC_DATA_READ) - datactrl |= MCI_DPSM_DIRECTION; - - clks = (unsigned long long)data->timeout_ns * host->clk_rate; - do_div(clks, NSEC_PER_SEC); - timeout = data->timeout_clks + (unsigned int)clks*2 ; - - if (datactrl & MCI_DPSM_DMAENABLE) { - /* Save parameters for the exec function */ - host->cmd_timeout = timeout; - host->cmd_pio_irqmask = pio_irqmask; - host->cmd_datactrl = datactrl; - host->cmd_cmd = cmd; - - host->dma.hdr.execute_func = msmsdcc_dma_exec_func; - host->dma.hdr.data = (void *)host; - host->dma.busy = 1; - - if (cmd) { - msmsdcc_start_command_deferred(host, cmd, &c); - host->cmd_c = c; - } - msm_dmov_enqueue_cmd(host->dma.channel, &host->dma.hdr); - if (data->flags & MMC_DATA_WRITE) - host->prog_scan = true; - } else { - msmsdcc_writel(host, timeout, MMCIDATATIMER); - - msmsdcc_writel(host, host->curr.xfer_size, MMCIDATALENGTH); - - msmsdcc_writel(host, (msmsdcc_readl(host, MMCIMASK0) & - (~MCI_IRQ_PIO)) | pio_irqmask, MMCIMASK0); - - msmsdcc_writel(host, datactrl, MMCIDATACTRL); - - if (cmd) { - /* Daisy-chain the command if requested */ - msmsdcc_start_command(host, cmd, c); - } - } -} - -static void -msmsdcc_start_command(struct msmsdcc_host *host, struct mmc_command *cmd, u32 c) -{ - if (cmd == cmd->mrq->stop) - c |= MCI_CSPM_MCIABORT; - - host->stats.cmds++; - - msmsdcc_start_command_deferred(host, cmd, &c); - msmsdcc_start_command_exec(host, cmd->arg, c); -} - -static void -msmsdcc_data_err(struct msmsdcc_host *host, struct mmc_data *data, - unsigned int status) -{ - if (status & MCI_DATACRCFAIL) { - pr_err("%s: Data CRC error\n", mmc_hostname(host->mmc)); - pr_err("%s: opcode 0x%.8x\n", __func__, - data->mrq->cmd->opcode); - pr_err("%s: blksz %d, blocks %d\n", __func__, - data->blksz, data->blocks); - data->error = -EILSEQ; - } else if (status & MCI_DATATIMEOUT) { - pr_err("%s: Data timeout\n", mmc_hostname(host->mmc)); - data->error = -ETIMEDOUT; - } else if (status & MCI_RXOVERRUN) { - pr_err("%s: RX overrun\n", mmc_hostname(host->mmc)); - data->error = -EIO; - } else if (status & MCI_TXUNDERRUN) { - pr_err("%s: TX underrun\n", mmc_hostname(host->mmc)); - data->error = -EIO; - } else { - pr_err("%s: Unknown error (0x%.8x)\n", - mmc_hostname(host->mmc), status); - data->error = -EIO; - } -} - - -static int -msmsdcc_pio_read(struct msmsdcc_host *host, char *buffer, unsigned int remain) -{ - uint32_t *ptr = (uint32_t *) buffer; - int count = 0; - - if (remain % 4) - remain = ((remain >> 2) + 1) << 2; - - while (msmsdcc_readl(host, MMCISTATUS) & MCI_RXDATAAVLBL) { - *ptr = msmsdcc_readl(host, MMCIFIFO + (count % MCI_FIFOSIZE)); - ptr++; - count += sizeof(uint32_t); - - remain -= sizeof(uint32_t); - if (remain == 0) - break; - } - return count; -} - -static int -msmsdcc_pio_write(struct msmsdcc_host *host, char *buffer, - unsigned int remain, u32 status) -{ - void __iomem *base = host->base; - char *ptr = buffer; - - do { - unsigned int count, maxcnt, sz; - - maxcnt = status & MCI_TXFIFOEMPTY ? MCI_FIFOSIZE : - MCI_FIFOHALFSIZE; - count = min(remain, maxcnt); - - sz = count % 4 ? (count >> 2) + 1 : (count >> 2); - writesl(base + MMCIFIFO, ptr, sz); - ptr += count; - remain -= count; - - if (remain == 0) - break; - - status = msmsdcc_readl(host, MMCISTATUS); - } while (status & MCI_TXFIFOHALFEMPTY); - - return ptr - buffer; -} - -static int -msmsdcc_spin_on_status(struct msmsdcc_host *host, uint32_t mask, int maxspin) -{ - while (maxspin) { - if ((msmsdcc_readl(host, MMCISTATUS) & mask)) - return 0; - udelay(1); - --maxspin; - } - return -ETIMEDOUT; -} - -static irqreturn_t -msmsdcc_pio_irq(int irq, void *dev_id) -{ - struct msmsdcc_host *host = dev_id; - uint32_t status; - u32 mci_mask0; - - status = msmsdcc_readl(host, MMCISTATUS); - mci_mask0 = msmsdcc_readl(host, MMCIMASK0); - - if (((mci_mask0 & status) & MCI_IRQ_PIO) == 0) - return IRQ_NONE; - - do { - unsigned long flags; - unsigned int remain, len; - char *buffer; - - if (!(status & (MCI_TXFIFOHALFEMPTY | MCI_RXDATAAVLBL))) { - if (host->curr.xfer_remain == 0 || !msmsdcc_piopoll) - break; - - if (msmsdcc_spin_on_status(host, - (MCI_TXFIFOHALFEMPTY | - MCI_RXDATAAVLBL), - PIO_SPINMAX)) { - break; - } - } - - /* Map the current scatter buffer */ - local_irq_save(flags); - buffer = kmap_atomic(sg_page(host->pio.sg)) - + host->pio.sg->offset; - buffer += host->pio.sg_off; - remain = host->pio.sg->length - host->pio.sg_off; - len = 0; - if (status & MCI_RXACTIVE) - len = msmsdcc_pio_read(host, buffer, remain); - if (status & MCI_TXACTIVE) - len = msmsdcc_pio_write(host, buffer, remain, status); - - /* Unmap the buffer */ - kunmap_atomic(buffer); - local_irq_restore(flags); - - host->pio.sg_off += len; - host->curr.xfer_remain -= len; - host->curr.data_xfered += len; - remain -= len; - - if (remain == 0) { - /* This sg page is full - do some housekeeping */ - if (status & MCI_RXACTIVE && host->curr.user_pages) - flush_dcache_page(sg_page(host->pio.sg)); - - if (!--host->pio.sg_len) { - memset(&host->pio, 0, sizeof(host->pio)); - break; - } - - /* Advance to next sg */ - host->pio.sg++; - host->pio.sg_off = 0; - } - - status = msmsdcc_readl(host, MMCISTATUS); - } while (1); - - if (status & MCI_RXACTIVE && host->curr.xfer_remain < MCI_FIFOSIZE) - msmsdcc_writel(host, (mci_mask0 & (~MCI_IRQ_PIO)) | - MCI_RXDATAAVLBLMASK, MMCIMASK0); - - if (!host->curr.xfer_remain) - msmsdcc_writel(host, (mci_mask0 & (~MCI_IRQ_PIO)) | 0, - MMCIMASK0); - - return IRQ_HANDLED; -} - -static void msmsdcc_do_cmdirq(struct msmsdcc_host *host, uint32_t status) -{ - struct mmc_command *cmd = host->curr.cmd; - - host->curr.cmd = NULL; - cmd->resp[0] = msmsdcc_readl(host, MMCIRESPONSE0); - cmd->resp[1] = msmsdcc_readl(host, MMCIRESPONSE1); - cmd->resp[2] = msmsdcc_readl(host, MMCIRESPONSE2); - cmd->resp[3] = msmsdcc_readl(host, MMCIRESPONSE3); - - if (status & MCI_CMDTIMEOUT) { - cmd->error = -ETIMEDOUT; - } else if (status & MCI_CMDCRCFAIL && - cmd->flags & MMC_RSP_CRC) { - pr_err("%s: Command CRC error\n", mmc_hostname(host->mmc)); - cmd->error = -EILSEQ; - } - - if (!cmd->data || cmd->error) { - if (host->curr.data && host->dma.sg) - msm_dmov_stop_cmd(host->dma.channel, - &host->dma.hdr, 0); - else if (host->curr.data) { /* Non DMA */ - msmsdcc_reset_and_restore(host); - msmsdcc_stop_data(host); - msmsdcc_request_end(host, cmd->mrq); - } else { /* host->data == NULL */ - if (!cmd->error && host->prog_enable) { - if (status & MCI_PROGDONE) { - host->prog_scan = false; - host->prog_enable = false; - msmsdcc_request_end(host, cmd->mrq); - } else { - host->curr.cmd = cmd; - } - } else { - if (host->prog_enable) { - host->prog_scan = false; - host->prog_enable = false; - } - msmsdcc_request_end(host, cmd->mrq); - } - } - } else if (cmd->data) - if (!(cmd->data->flags & MMC_DATA_READ)) - msmsdcc_start_data(host, cmd->data, - NULL, 0); -} - -static void -msmsdcc_handle_irq_data(struct msmsdcc_host *host, u32 status, - void __iomem *base) -{ - struct mmc_data *data = host->curr.data; - - if (status & (MCI_CMDSENT | MCI_CMDRESPEND | MCI_CMDCRCFAIL | - MCI_CMDTIMEOUT | MCI_PROGDONE) && host->curr.cmd) { - msmsdcc_do_cmdirq(host, status); - } - - if (!data) - return; - - /* Check for data errors */ - if (status & (MCI_DATACRCFAIL | MCI_DATATIMEOUT | - MCI_TXUNDERRUN | MCI_RXOVERRUN)) { - msmsdcc_data_err(host, data, status); - host->curr.data_xfered = 0; - if (host->dma.sg) - msm_dmov_stop_cmd(host->dma.channel, - &host->dma.hdr, 0); - else { - msmsdcc_reset_and_restore(host); - if (host->curr.data) - msmsdcc_stop_data(host); - if (!data->stop) - msmsdcc_request_end(host, data->mrq); - else - msmsdcc_start_command(host, data->stop, 0); - } - } - - /* Check for data done */ - if (!host->curr.got_dataend && (status & MCI_DATAEND)) - host->curr.got_dataend = 1; - - /* - * If DMA is still in progress, we complete via the completion handler - */ - if (host->curr.got_dataend && !host->dma.busy) { - /* - * There appears to be an issue in the controller where - * if you request a small block transfer (< fifo size), - * you may get your DATAEND/DATABLKEND irq without the - * PIO data irq. - * - * Check to see if there is still data to be read, - * and simulate a PIO irq. - */ - if (readl(base + MMCISTATUS) & MCI_RXDATAAVLBL) - msmsdcc_pio_irq(1, host); - - msmsdcc_stop_data(host); - if (!data->error) - host->curr.data_xfered = host->curr.xfer_size; - - if (!data->stop) - msmsdcc_request_end(host, data->mrq); - else - msmsdcc_start_command(host, data->stop, 0); - } -} - -static irqreturn_t -msmsdcc_irq(int irq, void *dev_id) -{ - struct msmsdcc_host *host = dev_id; - void __iomem *base = host->base; - u32 status; - int ret = 0; - int cardint = 0; - - spin_lock(&host->lock); - - do { - status = msmsdcc_readl(host, MMCISTATUS); - status &= msmsdcc_readl(host, MMCIMASK0); - if ((status & (~MCI_IRQ_PIO)) == 0) - break; - msmsdcc_writel(host, status, MMCICLEAR); - - if (status & MCI_SDIOINTR) - status &= ~MCI_SDIOINTR; - - if (!status) - break; - - msmsdcc_handle_irq_data(host, status, base); - - if (status & MCI_SDIOINTOPER) { - cardint = 1; - status &= ~MCI_SDIOINTOPER; - } - ret = 1; - } while (status); - - spin_unlock(&host->lock); - - /* - * We have to delay handling the card interrupt as it calls - * back into the driver. - */ - if (cardint) - mmc_signal_sdio_irq(host->mmc); - - return IRQ_RETVAL(ret); -} - -static void -msmsdcc_request(struct mmc_host *mmc, struct mmc_request *mrq) -{ - struct msmsdcc_host *host = mmc_priv(mmc); - unsigned long flags; - - WARN_ON(host->curr.mrq != NULL); - WARN_ON(host->pwr == 0); - - spin_lock_irqsave(&host->lock, flags); - - host->stats.reqs++; - - if (host->eject) { - if (mrq->data && !(mrq->data->flags & MMC_DATA_READ)) { - mrq->cmd->error = 0; - mrq->data->bytes_xfered = mrq->data->blksz * - mrq->data->blocks; - } else - mrq->cmd->error = -ENOMEDIUM; - - spin_unlock_irqrestore(&host->lock, flags); - mmc_request_done(mmc, mrq); - return; - } - - msmsdcc_enable_clocks(host); - - host->curr.mrq = mrq; - - if (mrq->data && mrq->data->flags & MMC_DATA_READ) - /* Queue/read data, daisy-chain command when data starts */ - msmsdcc_start_data(host, mrq->data, mrq->cmd, 0); - else - msmsdcc_start_command(host, mrq->cmd, 0); - - if (host->cmdpoll && !msmsdcc_spin_on_status(host, - MCI_CMDRESPEND|MCI_CMDCRCFAIL|MCI_CMDTIMEOUT, - CMD_SPINMAX)) { - uint32_t status = msmsdcc_readl(host, MMCISTATUS); - msmsdcc_do_cmdirq(host, status); - msmsdcc_writel(host, - MCI_CMDRESPEND | MCI_CMDCRCFAIL | MCI_CMDTIMEOUT, - MMCICLEAR); - host->stats.cmdpoll_hits++; - } else { - host->stats.cmdpoll_misses++; - } - spin_unlock_irqrestore(&host->lock, flags); -} - -static void msmsdcc_setup_gpio(struct msmsdcc_host *host, bool enable) -{ - struct msm_mmc_gpio_data *curr; - int i, rc = 0; - - if (!host->plat->gpio_data || host->gpio_config_status == enable) - return; - - curr = host->plat->gpio_data; - for (i = 0; i < curr->size; i++) { - if (enable) { - rc = gpio_request(curr->gpio[i].no, - curr->gpio[i].name); - if (rc) { - pr_err("%s: gpio_request(%d, %s) failed %d\n", - mmc_hostname(host->mmc), - curr->gpio[i].no, - curr->gpio[i].name, rc); - goto free_gpios; - } - } else { - gpio_free(curr->gpio[i].no); - } - } - host->gpio_config_status = enable; - return; - -free_gpios: - for (; i >= 0; i--) - gpio_free(curr->gpio[i].no); -} - -static void -msmsdcc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) -{ - struct msmsdcc_host *host = mmc_priv(mmc); - u32 clk = 0, pwr = 0; - int rc; - unsigned long flags; - - spin_lock_irqsave(&host->lock, flags); - - msmsdcc_enable_clocks(host); - - spin_unlock_irqrestore(&host->lock, flags); - - if (ios->clock) { - if (ios->clock != host->clk_rate) { - rc = clk_set_rate(host->clk, ios->clock); - if (rc < 0) - pr_err("%s: Error setting clock rate (%d)\n", - mmc_hostname(host->mmc), rc); - else - host->clk_rate = ios->clock; - } - clk |= MCI_CLK_ENABLE; - } - - if (ios->bus_width == MMC_BUS_WIDTH_4) - clk |= (2 << 10); /* Set WIDEBUS */ - - if (ios->clock > 400000 && msmsdcc_pwrsave) - clk |= (1 << 9); /* PWRSAVE */ - - clk |= (1 << 12); /* FLOW_ENA */ - clk |= (1 << 15); /* feedback clock */ - - if (host->plat->translate_vdd) - pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd); - - switch (ios->power_mode) { - case MMC_POWER_OFF: - msmsdcc_setup_gpio(host, false); - break; - case MMC_POWER_UP: - pwr |= MCI_PWR_UP; - msmsdcc_setup_gpio(host, true); - break; - case MMC_POWER_ON: - pwr |= MCI_PWR_ON; - break; - } - - if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) - pwr |= MCI_OD; - - msmsdcc_writel(host, clk, MMCICLOCK); - - if (host->pwr != pwr) { - host->pwr = pwr; - msmsdcc_writel(host, pwr, MMCIPOWER); - } -#if BUSCLK_PWRSAVE - spin_lock_irqsave(&host->lock, flags); - msmsdcc_disable_clocks(host, 1); - spin_unlock_irqrestore(&host->lock, flags); -#endif -} - -static void msmsdcc_enable_sdio_irq(struct mmc_host *mmc, int enable) -{ - struct msmsdcc_host *host = mmc_priv(mmc); - unsigned long flags; - u32 status; - - spin_lock_irqsave(&host->lock, flags); - if (msmsdcc_sdioirq == 1) { - status = msmsdcc_readl(host, MMCIMASK0); - if (enable) - status |= MCI_SDIOINTOPERMASK; - else - status &= ~MCI_SDIOINTOPERMASK; - host->saved_irq0mask = status; - msmsdcc_writel(host, status, MMCIMASK0); - } - spin_unlock_irqrestore(&host->lock, flags); -} - -static void msmsdcc_init_card(struct mmc_host *mmc, struct mmc_card *card) -{ - struct msmsdcc_host *host = mmc_priv(mmc); - - if (host->plat->init_card) - host->plat->init_card(card); -} - -static const struct mmc_host_ops msmsdcc_ops = { - .request = msmsdcc_request, - .set_ios = msmsdcc_set_ios, - .enable_sdio_irq = msmsdcc_enable_sdio_irq, - .init_card = msmsdcc_init_card, -}; - -static void -msmsdcc_check_status(unsigned long data) -{ - struct msmsdcc_host *host = (struct msmsdcc_host *)data; - unsigned int status; - - if (!host->plat->status) { - mmc_detect_change(host->mmc, 0); - goto out; - } - - status = host->plat->status(mmc_dev(host->mmc)); - host->eject = !status; - if (status ^ host->oldstat) { - pr_info("%s: Slot status change detected (%d -> %d)\n", - mmc_hostname(host->mmc), host->oldstat, status); - if (status) - mmc_detect_change(host->mmc, (5 * HZ) / 2); - else - mmc_detect_change(host->mmc, 0); - } - - host->oldstat = status; - -out: - if (host->timer.function) - mod_timer(&host->timer, jiffies + HZ); -} - -static irqreturn_t -msmsdcc_platform_status_irq(int irq, void *dev_id) -{ - struct msmsdcc_host *host = dev_id; - - pr_debug("%s: %d\n", __func__, irq); - msmsdcc_check_status((unsigned long) host); - return IRQ_HANDLED; -} - -static void -msmsdcc_status_notify_cb(int card_present, void *dev_id) -{ - struct msmsdcc_host *host = dev_id; - - pr_debug("%s: card_present %d\n", mmc_hostname(host->mmc), - card_present); - msmsdcc_check_status((unsigned long) host); -} - -static void -msmsdcc_busclk_expired(unsigned long _data) -{ - struct msmsdcc_host *host = (struct msmsdcc_host *) _data; - - if (host->clks_on) - msmsdcc_disable_clocks(host, 0); -} - -static int -msmsdcc_init_dma(struct msmsdcc_host *host) -{ - memset(&host->dma, 0, sizeof(struct msmsdcc_dma_data)); - host->dma.host = host; - host->dma.channel = -1; - - if (!host->dmares) - return -ENODEV; - - host->dma.nc = dma_alloc_coherent(NULL, - sizeof(struct msmsdcc_nc_dmadata), - &host->dma.nc_busaddr, - GFP_KERNEL); - if (host->dma.nc == NULL) { - pr_err("Unable to allocate DMA buffer\n"); - return -ENOMEM; - } - memset(host->dma.nc, 0x00, sizeof(struct msmsdcc_nc_dmadata)); - host->dma.cmd_busaddr = host->dma.nc_busaddr; - host->dma.cmdptr_busaddr = host->dma.nc_busaddr + - offsetof(struct msmsdcc_nc_dmadata, cmdptr); - host->dma.channel = host->dmares->start; - - return 0; -} - -static int -msmsdcc_probe(struct platform_device *pdev) -{ - struct msm_mmc_platform_data *plat = pdev->dev.platform_data; - struct msmsdcc_host *host; - struct mmc_host *mmc; - struct resource *cmd_irqres = NULL; - struct resource *stat_irqres = NULL; - struct resource *memres = NULL; - struct resource *dmares = NULL; - int ret; - - /* must have platform data */ - if (!plat) { - pr_err("%s: Platform data not available\n", __func__); - ret = -EINVAL; - goto out; - } - - if (pdev->id < 1 || pdev->id > 4) - return -EINVAL; - - if (pdev->resource == NULL || pdev->num_resources < 2) { - pr_err("%s: Invalid resource\n", __func__); - return -ENXIO; - } - - memres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0); - cmd_irqres = platform_get_resource_byname(pdev, IORESOURCE_IRQ, - "cmd_irq"); - stat_irqres = platform_get_resource_byname(pdev, IORESOURCE_IRQ, - "status_irq"); - - if (!cmd_irqres || !memres) { - pr_err("%s: Invalid resource\n", __func__); - return -ENXIO; - } - - /* - * Setup our host structure - */ - - mmc = mmc_alloc_host(sizeof(struct msmsdcc_host), &pdev->dev); - if (!mmc) { - ret = -ENOMEM; - goto out; - } - - host = mmc_priv(mmc); - host->pdev_id = pdev->id; - host->plat = plat; - host->mmc = mmc; - host->curr.cmd = NULL; - init_timer(&host->busclk_timer); - host->busclk_timer.data = (unsigned long) host; - host->busclk_timer.function = msmsdcc_busclk_expired; - - - host->cmdpoll = 1; - - host->base = ioremap(memres->start, PAGE_SIZE); - if (!host->base) { - ret = -ENOMEM; - goto host_free; - } - - host->cmd_irqres = cmd_irqres; - host->memres = memres; - host->dmares = dmares; - spin_lock_init(&host->lock); - - tasklet_init(&host->dma_tlet, msmsdcc_dma_complete_tlet, - (unsigned long)host); - - /* - * Setup DMA - */ - if (host->dmares) { - ret = msmsdcc_init_dma(host); - if (ret) - goto ioremap_free; - } else { - host->dma.channel = -1; - } - - /* Get our clocks */ - host->pclk = clk_get(&pdev->dev, "sdc_pclk"); - if (IS_ERR(host->pclk)) { - ret = PTR_ERR(host->pclk); - goto dma_free; - } - - host->clk = clk_get(&pdev->dev, "sdc_clk"); - if (IS_ERR(host->clk)) { - ret = PTR_ERR(host->clk); - goto pclk_put; - } - - ret = clk_set_rate(host->clk, msmsdcc_fmin); - if (ret) { - pr_err("%s: Clock rate set failed (%d)\n", __func__, ret); - goto clk_put; - } - - ret = clk_prepare(host->pclk); - if (ret) - goto clk_put; - - ret = clk_prepare(host->clk); - if (ret) - goto clk_unprepare_p; - - /* Enable clocks */ - ret = msmsdcc_enable_clocks(host); - if (ret) - goto clk_unprepare; - - host->pclk_rate = clk_get_rate(host->pclk); - host->clk_rate = clk_get_rate(host->clk); - - /* - * Setup MMC host structure - */ - mmc->ops = &msmsdcc_ops; - mmc->f_min = msmsdcc_fmin; - mmc->f_max = msmsdcc_fmax; - mmc->ocr_avail = plat->ocr_mask; - - if (msmsdcc_4bit) - mmc->caps |= MMC_CAP_4_BIT_DATA; - if (msmsdcc_sdioirq) - mmc->caps |= MMC_CAP_SDIO_IRQ; - mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; - - mmc->max_segs = NR_SG; - mmc->max_blk_size = 4096; /* MCI_DATA_CTL BLOCKSIZE up to 4096 */ - mmc->max_blk_count = 65536; - - mmc->max_req_size = 33554432; /* MCI_DATA_LENGTH is 25 bits */ - mmc->max_seg_size = mmc->max_req_size; - - msmsdcc_writel(host, 0, MMCIMASK0); - msmsdcc_writel(host, 0x5e007ff, MMCICLEAR); - - msmsdcc_writel(host, MCI_IRQENABLE, MMCIMASK0); - host->saved_irq0mask = MCI_IRQENABLE; - - /* - * Setup card detect change - */ - - memset(&host->timer, 0, sizeof(host->timer)); - - if (stat_irqres && !(stat_irqres->flags & IORESOURCE_DISABLED)) { - unsigned long irqflags = IRQF_SHARED | - (stat_irqres->flags & IRQF_TRIGGER_MASK); - - host->stat_irq = stat_irqres->start; - ret = request_irq(host->stat_irq, - msmsdcc_platform_status_irq, - irqflags, - DRIVER_NAME " (slot)", - host); - if (ret) { - pr_err("%s: Unable to get slot IRQ %d (%d)\n", - mmc_hostname(mmc), host->stat_irq, ret); - goto clk_disable; - } - } else if (plat->register_status_notify) { - plat->register_status_notify(msmsdcc_status_notify_cb, host); - } else if (!plat->status) - pr_err("%s: No card detect facilities available\n", - mmc_hostname(mmc)); - else { - init_timer(&host->timer); - host->timer.data = (unsigned long)host; - host->timer.function = msmsdcc_check_status; - host->timer.expires = jiffies + HZ; - add_timer(&host->timer); - } - - if (plat->status) { - host->oldstat = host->plat->status(mmc_dev(host->mmc)); - host->eject = !host->oldstat; - } - - ret = request_irq(cmd_irqres->start, msmsdcc_irq, IRQF_SHARED, - DRIVER_NAME " (cmd)", host); - if (ret) - goto stat_irq_free; - - ret = request_irq(cmd_irqres->start, msmsdcc_pio_irq, IRQF_SHARED, - DRIVER_NAME " (pio)", host); - if (ret) - goto cmd_irq_free; - - platform_set_drvdata(pdev, mmc); - mmc_add_host(mmc); - - pr_info("%s: Qualcomm MSM SDCC at 0x%016llx irq %d,%d dma %d\n", - mmc_hostname(mmc), (unsigned long long)memres->start, - (unsigned int) cmd_irqres->start, - (unsigned int) host->stat_irq, host->dma.channel); - pr_info("%s: 4 bit data mode %s\n", mmc_hostname(mmc), - (mmc->caps & MMC_CAP_4_BIT_DATA ? "enabled" : "disabled")); - pr_info("%s: MMC clock %u -> %u Hz, PCLK %u Hz\n", - mmc_hostname(mmc), msmsdcc_fmin, msmsdcc_fmax, host->pclk_rate); - pr_info("%s: Slot eject status = %d\n", mmc_hostname(mmc), host->eject); - pr_info("%s: Power save feature enable = %d\n", - mmc_hostname(mmc), msmsdcc_pwrsave); - - if (host->dma.channel != -1) { - pr_info("%s: DM non-cached buffer at %p, dma_addr 0x%.8x\n", - mmc_hostname(mmc), host->dma.nc, host->dma.nc_busaddr); - pr_info("%s: DM cmd busaddr 0x%.8x, cmdptr busaddr 0x%.8x\n", - mmc_hostname(mmc), host->dma.cmd_busaddr, - host->dma.cmdptr_busaddr); - } else - pr_info("%s: PIO transfer enabled\n", mmc_hostname(mmc)); - if (host->timer.function) - pr_info("%s: Polling status mode enabled\n", mmc_hostname(mmc)); - - return 0; - cmd_irq_free: - free_irq(cmd_irqres->start, host); - stat_irq_free: - if (host->stat_irq) - free_irq(host->stat_irq, host); - clk_disable: - msmsdcc_disable_clocks(host, 0); - clk_unprepare: - clk_unprepare(host->clk); - clk_unprepare_p: - clk_unprepare(host->pclk); - clk_put: - clk_put(host->clk); - pclk_put: - clk_put(host->pclk); -dma_free: - if (host->dmares) - dma_free_coherent(NULL, sizeof(struct msmsdcc_nc_dmadata), - host->dma.nc, host->dma.nc_busaddr); -ioremap_free: - tasklet_kill(&host->dma_tlet); - iounmap(host->base); - host_free: - mmc_free_host(mmc); - out: - return ret; -} - -#ifdef CONFIG_PM -static int -msmsdcc_suspend(struct platform_device *dev, pm_message_t state) -{ - struct mmc_host *mmc = platform_get_drvdata(dev); - - if (mmc) { - struct msmsdcc_host *host = mmc_priv(mmc); - - if (host->stat_irq) - disable_irq(host->stat_irq); - - msmsdcc_writel(host, 0, MMCIMASK0); - if (host->clks_on) - msmsdcc_disable_clocks(host, 0); - } - return 0; -} - -static int -msmsdcc_resume(struct platform_device *dev) -{ - struct mmc_host *mmc = platform_get_drvdata(dev); - - if (mmc) { - struct msmsdcc_host *host = mmc_priv(mmc); - - msmsdcc_enable_clocks(host); - - msmsdcc_writel(host, host->saved_irq0mask, MMCIMASK0); - - if (host->stat_irq) - enable_irq(host->stat_irq); -#if BUSCLK_PWRSAVE - msmsdcc_disable_clocks(host, 1); -#endif - } - return 0; -} -#else -#define msmsdcc_suspend 0 -#define msmsdcc_resume 0 -#endif - -static struct platform_driver msmsdcc_driver = { - .probe = msmsdcc_probe, - .suspend = msmsdcc_suspend, - .resume = msmsdcc_resume, - .driver = { - .name = "msm_sdcc", - }, -}; - -module_platform_driver(msmsdcc_driver); - -MODULE_DESCRIPTION("Qualcomm MSM 7X00A Multimedia Card Interface driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/mmc/host/msm_sdcc.h b/drivers/mmc/host/msm_sdcc.h deleted file mode 100644 index 402028d16b86..000000000000 --- a/drivers/mmc/host/msm_sdcc.h +++ /dev/null @@ -1,256 +0,0 @@ -/* - * linux/drivers/mmc/host/msmsdcc.h - QCT MSM7K SDC Controller - * - * Copyright (C) 2008 Google, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * - Based on mmci.h - */ - -#ifndef _MSM_SDCC_H -#define _MSM_SDCC_H - -#define MSMSDCC_CRCI_SDC1 6 -#define MSMSDCC_CRCI_SDC2 7 -#define MSMSDCC_CRCI_SDC3 12 -#define MSMSDCC_CRCI_SDC4 13 - -#define MMCIPOWER 0x000 -#define MCI_PWR_OFF 0x00 -#define MCI_PWR_UP 0x02 -#define MCI_PWR_ON 0x03 -#define MCI_OD (1 << 6) - -#define MMCICLOCK 0x004 -#define MCI_CLK_ENABLE (1 << 8) -#define MCI_CLK_PWRSAVE (1 << 9) -#define MCI_CLK_WIDEBUS (1 << 10) -#define MCI_CLK_FLOWENA (1 << 12) -#define MCI_CLK_INVERTOUT (1 << 13) -#define MCI_CLK_SELECTIN (1 << 14) - -#define MMCIARGUMENT 0x008 -#define MMCICOMMAND 0x00c -#define MCI_CPSM_RESPONSE (1 << 6) -#define MCI_CPSM_LONGRSP (1 << 7) -#define MCI_CPSM_INTERRUPT (1 << 8) -#define MCI_CPSM_PENDING (1 << 9) -#define MCI_CPSM_ENABLE (1 << 10) -#define MCI_CPSM_PROGENA (1 << 11) -#define MCI_CSPM_DATCMD (1 << 12) -#define MCI_CSPM_MCIABORT (1 << 13) -#define MCI_CSPM_CCSENABLE (1 << 14) -#define MCI_CSPM_CCSDISABLE (1 << 15) - - -#define MMCIRESPCMD 0x010 -#define MMCIRESPONSE0 0x014 -#define MMCIRESPONSE1 0x018 -#define MMCIRESPONSE2 0x01c -#define MMCIRESPONSE3 0x020 -#define MMCIDATATIMER 0x024 -#define MMCIDATALENGTH 0x028 - -#define MMCIDATACTRL 0x02c -#define MCI_DPSM_ENABLE (1 << 0) -#define MCI_DPSM_DIRECTION (1 << 1) -#define MCI_DPSM_MODE (1 << 2) -#define MCI_DPSM_DMAENABLE (1 << 3) - -#define MMCIDATACNT 0x030 -#define MMCISTATUS 0x034 -#define MCI_CMDCRCFAIL (1 << 0) -#define MCI_DATACRCFAIL (1 << 1) -#define MCI_CMDTIMEOUT (1 << 2) -#define MCI_DATATIMEOUT (1 << 3) -#define MCI_TXUNDERRUN (1 << 4) -#define MCI_RXOVERRUN (1 << 5) -#define MCI_CMDRESPEND (1 << 6) -#define MCI_CMDSENT (1 << 7) -#define MCI_DATAEND (1 << 8) -#define MCI_DATABLOCKEND (1 << 10) -#define MCI_CMDACTIVE (1 << 11) -#define MCI_TXACTIVE (1 << 12) -#define MCI_RXACTIVE (1 << 13) -#define MCI_TXFIFOHALFEMPTY (1 << 14) -#define MCI_RXFIFOHALFFULL (1 << 15) -#define MCI_TXFIFOFULL (1 << 16) -#define MCI_RXFIFOFULL (1 << 17) -#define MCI_TXFIFOEMPTY (1 << 18) -#define MCI_RXFIFOEMPTY (1 << 19) -#define MCI_TXDATAAVLBL (1 << 20) -#define MCI_RXDATAAVLBL (1 << 21) -#define MCI_SDIOINTR (1 << 22) -#define MCI_PROGDONE (1 << 23) -#define MCI_ATACMDCOMPL (1 << 24) -#define MCI_SDIOINTOPER (1 << 25) -#define MCI_CCSTIMEOUT (1 << 26) - -#define MMCICLEAR 0x038 -#define MCI_CMDCRCFAILCLR (1 << 0) -#define MCI_DATACRCFAILCLR (1 << 1) -#define MCI_CMDTIMEOUTCLR (1 << 2) -#define MCI_DATATIMEOUTCLR (1 << 3) -#define MCI_TXUNDERRUNCLR (1 << 4) -#define MCI_RXOVERRUNCLR (1 << 5) -#define MCI_CMDRESPENDCLR (1 << 6) -#define MCI_CMDSENTCLR (1 << 7) -#define MCI_DATAENDCLR (1 << 8) -#define MCI_DATABLOCKENDCLR (1 << 10) - -#define MMCIMASK0 0x03c -#define MCI_CMDCRCFAILMASK (1 << 0) -#define MCI_DATACRCFAILMASK (1 << 1) -#define MCI_CMDTIMEOUTMASK (1 << 2) -#define MCI_DATATIMEOUTMASK (1 << 3) -#define MCI_TXUNDERRUNMASK (1 << 4) -#define MCI_RXOVERRUNMASK (1 << 5) -#define MCI_CMDRESPENDMASK (1 << 6) -#define MCI_CMDSENTMASK (1 << 7) -#define MCI_DATAENDMASK (1 << 8) -#define MCI_DATABLOCKENDMASK (1 << 10) -#define MCI_CMDACTIVEMASK (1 << 11) -#define MCI_TXACTIVEMASK (1 << 12) -#define MCI_RXACTIVEMASK (1 << 13) -#define MCI_TXFIFOHALFEMPTYMASK (1 << 14) -#define MCI_RXFIFOHALFFULLMASK (1 << 15) -#define MCI_TXFIFOFULLMASK (1 << 16) -#define MCI_RXFIFOFULLMASK (1 << 17) -#define MCI_TXFIFOEMPTYMASK (1 << 18) -#define MCI_RXFIFOEMPTYMASK (1 << 19) -#define MCI_TXDATAAVLBLMASK (1 << 20) -#define MCI_RXDATAAVLBLMASK (1 << 21) -#define MCI_SDIOINTMASK (1 << 22) -#define MCI_PROGDONEMASK (1 << 23) -#define MCI_ATACMDCOMPLMASK (1 << 24) -#define MCI_SDIOINTOPERMASK (1 << 25) -#define MCI_CCSTIMEOUTMASK (1 << 26) - -#define MMCIMASK1 0x040 -#define MMCIFIFOCNT 0x044 -#define MCICCSTIMER 0x058 - -#define MMCIFIFO 0x080 /* to 0x0bc */ - -#define MCI_IRQENABLE \ - (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \ - MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \ - MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATAENDMASK|MCI_PROGDONEMASK) - -#define MCI_IRQ_PIO \ - (MCI_RXDATAAVLBLMASK | MCI_TXDATAAVLBLMASK | MCI_RXFIFOEMPTYMASK | \ - MCI_TXFIFOEMPTYMASK | MCI_RXFIFOFULLMASK | MCI_TXFIFOFULLMASK | \ - MCI_RXFIFOHALFFULLMASK | MCI_TXFIFOHALFEMPTYMASK | \ - MCI_RXACTIVEMASK | MCI_TXACTIVEMASK) -/* - * The size of the FIFO in bytes. - */ -#define MCI_FIFOSIZE (16*4) - -#define MCI_FIFOHALFSIZE (MCI_FIFOSIZE / 2) - -#define NR_SG 32 - -struct clk; - -struct msmsdcc_nc_dmadata { - dmov_box cmd[NR_SG]; - uint32_t cmdptr; -}; - -struct msmsdcc_dma_data { - struct msmsdcc_nc_dmadata *nc; - dma_addr_t nc_busaddr; - dma_addr_t cmd_busaddr; - dma_addr_t cmdptr_busaddr; - - struct msm_dmov_cmd hdr; - enum dma_data_direction dir; - - struct scatterlist *sg; - int num_ents; - - int channel; - struct msmsdcc_host *host; - int busy; /* Set if DM is busy */ - int active; - unsigned int result; - struct msm_dmov_errdata err; -}; - -struct msmsdcc_pio_data { - struct scatterlist *sg; - unsigned int sg_len; - unsigned int sg_off; -}; - -struct msmsdcc_curr_req { - struct mmc_request *mrq; - struct mmc_command *cmd; - struct mmc_data *data; - unsigned int xfer_size; /* Total data size */ - unsigned int xfer_remain; /* Bytes remaining to send */ - unsigned int data_xfered; /* Bytes acked by BLKEND irq */ - int got_dataend; - int user_pages; -}; - -struct msmsdcc_stats { - unsigned int reqs; - unsigned int cmds; - unsigned int cmdpoll_hits; - unsigned int cmdpoll_misses; -}; - -struct msmsdcc_host { - struct resource *cmd_irqres; - struct resource *memres; - struct resource *dmares; - void __iomem *base; - int pdev_id; - unsigned int stat_irq; - - struct msmsdcc_curr_req curr; - - struct mmc_host *mmc; - struct clk *clk; /* main MMC bus clock */ - struct clk *pclk; /* SDCC peripheral bus clock */ - unsigned int clks_on; /* set if clocks are enabled */ - struct timer_list busclk_timer; - - unsigned int eject; /* eject state */ - - spinlock_t lock; - - unsigned int clk_rate; /* Current clock rate */ - unsigned int pclk_rate; - - u32 pwr; - u32 saved_irq0mask; /* MMCIMASK0 reg value */ - struct msm_mmc_platform_data *plat; - - struct timer_list timer; - unsigned int oldstat; - - struct msmsdcc_dma_data dma; - struct msmsdcc_pio_data pio; - int cmdpoll; - struct msmsdcc_stats stats; - - struct tasklet_struct dma_tlet; - /* Command parameters */ - unsigned int cmd_timeout; - unsigned int cmd_pio_irqmask; - unsigned int cmd_datactrl; - struct mmc_command *cmd_cmd; - u32 cmd_c; - bool gpio_config_status; - - bool prog_scan; - bool prog_enable; -}; - -#endif diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index 45f67c63d385..a65f821f52eb 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -275,6 +275,7 @@ config BFIN_CFPCMCIA config AT91_CF tristate "AT91 CompactFlash Controller" + depends on PCI depends on PCMCIA && ARCH_AT91 depends on !ARCH_MULTIPLATFORM help diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c index bfb799c7b343..e7775a41ae5d 100644 --- a/drivers/pcmcia/at91_cf.c +++ b/drivers/pcmcia/at91_cf.c @@ -317,13 +317,14 @@ static int at91_cf_probe(struct platform_device *pdev) } else cf->socket.pci_irq = nr_irqs + 1; - /* pcmcia layer only remaps "real" memory not iospace */ - cf->socket.io_offset = (unsigned long) devm_ioremap(&pdev->dev, - cf->phys_baseaddr + CF_IO_PHYS, SZ_2K); - if (!cf->socket.io_offset) { - status = -ENXIO; + /* + * pcmcia layer only remaps "real" memory not iospace + * io_offset is set to 0x10000 to avoid the check in static_find_io(). + * */ + cf->socket.io_offset = 0x10000; + status = pci_ioremap_io(0x10000, cf->phys_baseaddr + CF_IO_PHYS); + if (status) goto fail0a; - } /* reserve chip-select regions */ if (!devm_request_mem_region(&pdev->dev, io->start, resource_size(io), "at91_cf")) { diff --git a/include/linux/platform_data/mmc-msm_sdcc.h b/include/linux/platform_data/mmc-msm_sdcc.h deleted file mode 100644 index 55aa873c9396..000000000000 --- a/include/linux/platform_data/mmc-msm_sdcc.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __MMC_MSM_SDCC_H -#define __MMC_MSM_SDCC_H - -#include <linux/mmc/host.h> -#include <linux/mmc/card.h> -#include <linux/mmc/sdio_func.h> - -struct msm_mmc_gpio { - unsigned no; - const char *name; -}; - -struct msm_mmc_gpio_data { - struct msm_mmc_gpio *gpio; - u8 size; -}; - -struct msm_mmc_platform_data { - unsigned int ocr_mask; /* available voltages */ - u32 (*translate_vdd)(struct device *, unsigned int); - unsigned int (*status)(struct device *); - int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id); - struct msm_mmc_gpio_data *gpio_data; - void (*init_card)(struct mmc_card *card); -}; - -#endif |