diff options
| -rw-r--r-- | MAINTAINERS | 15 | ||||
| -rw-r--r-- | drivers/acpi/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/acpi/bus.c | 7 | ||||
| -rw-r--r-- | drivers/acpi/dock.c | 6 | ||||
| -rw-r--r-- | drivers/acpi/osl.c | 25 | ||||
| -rw-r--r-- | drivers/acpi/processor_driver.c | 2 | ||||
| -rw-r--r-- | drivers/acpi/processor_thermal.c | 178 | ||||
| -rw-r--r-- | drivers/acpi/sleep.c | 12 | ||||
| -rw-r--r-- | drivers/acpi/sleep.h | 1 | ||||
| -rw-r--r-- | include/acpi/acpi_drivers.h | 2 | ||||
| -rw-r--r-- | include/acpi/acpiosxf.h | 2 | ||||
| -rw-r--r-- | include/linux/acpi.h | 8 |
12 files changed, 20 insertions, 240 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index f2a2b8e647c5..2a3163e527fe 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -241,21 +241,6 @@ F: drivers/pnp/pnpacpi/ F: include/linux/acpi.h F: include/acpi/ -ACPI BATTERY DRIVERS -M: Alexey Starikovskiy <astarikovskiy@suse.de> -L: linux-acpi@vger.kernel.org -W: http://www.lesswatts.org/projects/acpi/ -S: Supported -F: drivers/acpi/battery.c -F: drivers/acpi/*sbs* - -ACPI EC DRIVER -M: Alexey Starikovskiy <astarikovskiy@suse.de> -L: linux-acpi@vger.kernel.org -W: http://www.lesswatts.org/projects/acpi/ -S: Supported -F: drivers/acpi/ec.c - ACPI FAN DRIVER M: Zhang Rui <rui.zhang@intel.com> L: linux-acpi@vger.kernel.org diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 0f9de2b44c0c..3f3489c5ca8c 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -9,7 +9,6 @@ menuconfig ACPI depends on PCI depends on PM select PNP - select CPU_IDLE default y help Advanced Configuration and Power Interface (ACPI) support for @@ -200,6 +199,7 @@ config ACPI_DOCK config ACPI_PROCESSOR tristate "Processor" select THERMAL + select CPU_IDLE default y help This driver installs ACPI as the idle handler for Linux and uses diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 310e3b9749cb..d68bd61072bb 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -935,6 +935,12 @@ static int __init acpi_bus_init(void) goto error1; } + /* + * _PDC control method may load dynamic SSDT tables, + * and we need to install the table handler before that. + */ + acpi_sysfs_init(); + acpi_early_processor_set_pdc(); /* @@ -1026,7 +1032,6 @@ static int __init acpi_init(void) acpi_scan_init(); acpi_ec_init(); acpi_power_init(); - acpi_sysfs_init(); acpi_debugfs_init(); acpi_sleep_proc_init(); acpi_wakeup_device_init(); diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 44f99bd83741..81514a4918cc 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -930,7 +930,7 @@ static struct attribute_group dock_attribute_group = { * allocated and initialize a new dock station device. Find all devices * that are on the dock station, and register for dock event notifications. */ -static int dock_add(acpi_handle handle) +static int __init dock_add(acpi_handle handle) { int ret, id; struct dock_station ds, *dock_station; @@ -1024,7 +1024,7 @@ static int dock_remove(struct dock_station *ds) * * This is called by acpi_walk_namespace to look for dock stations. */ -static acpi_status +static __init acpi_status find_dock(acpi_handle handle, u32 lvl, void *context, void **rv) { if (is_dock(handle)) @@ -1033,7 +1033,7 @@ find_dock(acpi_handle handle, u32 lvl, void *context, void **rv) return AE_OK; } -static acpi_status +static __init acpi_status find_bay(acpi_handle handle, u32 lvl, void *context, void **rv) { /* If bay is a dock, it's already handled */ diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 0c2e445410ab..966feddf6b1b 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -875,16 +875,6 @@ void acpi_os_wait_events_complete(void *context) EXPORT_SYMBOL(acpi_os_wait_events_complete); /* - * Allocate the memory for a spinlock and initialize it. - */ -acpi_status acpi_os_create_lock(acpi_spinlock * handle) -{ - spin_lock_init(*handle); - - return AE_OK; -} - -/* * Deallocate the memory for a spinlock. */ void acpi_os_delete_lock(acpi_spinlock handle) @@ -1265,21 +1255,6 @@ int acpi_check_region(resource_size_t start, resource_size_t n, } EXPORT_SYMBOL(acpi_check_region); -int acpi_check_mem_region(resource_size_t start, resource_size_t n, - const char *name) -{ - struct resource res = { - .start = start, - .end = start + n - 1, - .name = name, - .flags = IORESOURCE_MEM, - }; - - return acpi_check_resource_conflict(&res); - -} -EXPORT_SYMBOL(acpi_check_mem_region); - /* * Let drivers know whether the resource checks are effective */ diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 356c320bdd08..85e48047d7b0 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -917,6 +917,4 @@ static void __exit acpi_processor_exit(void) module_init(acpi_processor_init); module_exit(acpi_processor_exit); -EXPORT_SYMBOL(acpi_processor_set_thermal_limit); - MODULE_ALIAS("processor"); diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index 953b25fb9869..fde49b9b1d99 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -44,47 +44,6 @@ #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_thermal"); -/* -------------------------------------------------------------------------- - Limit Interface - -------------------------------------------------------------------------- */ -static int acpi_processor_apply_limit(struct acpi_processor *pr) -{ - int result = 0; - u16 px = 0; - u16 tx = 0; - - - if (!pr) - return -EINVAL; - - if (!pr->flags.limit) - return -ENODEV; - - if (pr->flags.throttling) { - if (pr->limit.user.tx > tx) - tx = pr->limit.user.tx; - if (pr->limit.thermal.tx > tx) - tx = pr->limit.thermal.tx; - - result = acpi_processor_set_throttling(pr, tx, false); - if (result) - goto end; - } - - pr->limit.state.px = px; - pr->limit.state.tx = tx; - - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Processor [%d] limit set to (P%d:T%d)\n", pr->id, - pr->limit.state.px, pr->limit.state.tx)); - - end: - if (result) - printk(KERN_ERR PREFIX "Unable to set limit\n"); - - return result; -} - #ifdef CONFIG_CPU_FREQ /* If a passive cooling situation is detected, primarily CPUfreq is used, as it @@ -107,36 +66,6 @@ static int cpu_has_cpufreq(unsigned int cpu) return 1; } -static int acpi_thermal_cpufreq_increase(unsigned int cpu) -{ - if (!cpu_has_cpufreq(cpu)) - return -ENODEV; - - if (per_cpu(cpufreq_thermal_reduction_pctg, cpu) < - CPUFREQ_THERMAL_MAX_STEP) { - per_cpu(cpufreq_thermal_reduction_pctg, cpu)++; - cpufreq_update_policy(cpu); - return 0; - } - - return -ERANGE; -} - -static int acpi_thermal_cpufreq_decrease(unsigned int cpu) -{ - if (!cpu_has_cpufreq(cpu)) - return -ENODEV; - - if (per_cpu(cpufreq_thermal_reduction_pctg, cpu) > - (CPUFREQ_THERMAL_MIN_STEP + 1)) - per_cpu(cpufreq_thermal_reduction_pctg, cpu)--; - else - per_cpu(cpufreq_thermal_reduction_pctg, cpu) = 0; - cpufreq_update_policy(cpu); - /* We reached max freq again and can leave passive mode */ - return !per_cpu(cpufreq_thermal_reduction_pctg, cpu); -} - static int acpi_thermal_cpufreq_notifier(struct notifier_block *nb, unsigned long event, void *data) { @@ -238,113 +167,6 @@ static int acpi_thermal_cpufreq_decrease(unsigned int cpu) #endif -int acpi_processor_set_thermal_limit(acpi_handle handle, int type) -{ - int result = 0; - struct acpi_processor *pr = NULL; - struct acpi_device *device = NULL; - int tx = 0, max_tx_px = 0; - - - if ((type < ACPI_PROCESSOR_LIMIT_NONE) - || (type > ACPI_PROCESSOR_LIMIT_DECREMENT)) - return -EINVAL; - - result = acpi_bus_get_device(handle, &device); - if (result) - return result; - - pr = acpi_driver_data(device); - if (!pr) - return -ENODEV; - - /* Thermal limits are always relative to the current Px/Tx state. */ - if (pr->flags.throttling) - pr->limit.thermal.tx = pr->throttling.state; - - /* - * Our default policy is to only use throttling at the lowest - * performance state. - */ - - tx = pr->limit.thermal.tx; - - switch (type) { - - case ACPI_PROCESSOR_LIMIT_NONE: - do { - result = acpi_thermal_cpufreq_decrease(pr->id); - } while (!result); - tx = 0; - break; - - case ACPI_PROCESSOR_LIMIT_INCREMENT: - /* if going up: P-states first, T-states later */ - - result = acpi_thermal_cpufreq_increase(pr->id); - if (!result) - goto end; - else if (result == -ERANGE) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "At maximum performance state\n")); - - if (pr->flags.throttling) { - if (tx == (pr->throttling.state_count - 1)) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "At maximum throttling state\n")); - else - tx++; - } - break; - - case ACPI_PROCESSOR_LIMIT_DECREMENT: - /* if going down: T-states first, P-states later */ - - if (pr->flags.throttling) { - if (tx == 0) { - max_tx_px = 1; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "At minimum throttling state\n")); - } else { - tx--; - goto end; - } - } - - result = acpi_thermal_cpufreq_decrease(pr->id); - if (result) { - /* - * We only could get -ERANGE, 1 or 0. - * In the first two cases we reached max freq again. - */ - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "At minimum performance state\n")); - max_tx_px = 1; - } else - max_tx_px = 0; - - break; - } - - end: - if (pr->flags.throttling) { - pr->limit.thermal.px = 0; - pr->limit.thermal.tx = tx; - - result = acpi_processor_apply_limit(pr); - if (result) - printk(KERN_ERR PREFIX "Unable to set thermal limit\n"); - - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Thermal limit now (P%d:T%d)\n", - pr->limit.thermal.px, pr->limit.thermal.tx)); - } else - result = 0; - if (max_tx_px) - return 1; - else - return result; -} - int acpi_processor_get_limit_info(struct acpi_processor *pr) { diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index e807f4196f89..721d93b3ceee 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -25,7 +25,7 @@ #include "internal.h" #include "sleep.h" -u8 sleep_states[ACPI_S_STATE_COUNT]; +static u8 sleep_states[ACPI_S_STATE_COUNT]; static u32 acpi_target_sleep_state = ACPI_STATE_S0; @@ -419,6 +419,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"), }, }, + { + .callback = init_nvs_nosave, + .ident = "Sony Vaio VPCEB1Z1E", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"), + }, + }, {}, }; #endif /* CONFIG_SUSPEND */ @@ -706,7 +714,7 @@ static void acpi_power_off(void) * paths through the BIOS, so disable _GTS and _BFS by default, * but do speak up and offer the option to enable them. */ -void __init acpi_gts_bfs_check(void) +static void __init acpi_gts_bfs_check(void) { acpi_handle dummy; diff --git a/drivers/acpi/sleep.h b/drivers/acpi/sleep.h index d8821805c3bc..74d59c8f4678 100644 --- a/drivers/acpi/sleep.h +++ b/drivers/acpi/sleep.h @@ -1,5 +1,4 @@ -extern u8 sleep_states[]; extern int acpi_suspend(u32 state); extern void acpi_enable_wakeup_devices(u8 sleep_state); diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 23d78b4d088b..3090471b2a5e 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -115,8 +115,6 @@ void pci_acpi_crs_quirks(void); #define ACPI_PROCESSOR_LIMIT_INCREMENT 0x01 #define ACPI_PROCESSOR_LIMIT_DECREMENT 0x02 -int acpi_processor_set_thermal_limit(acpi_handle handle, int type); - /*-------------------------------------------------------------------------- Dock Station -------------------------------------------------------------------------- */ diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index 43027432a055..65b3f5888f42 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -98,8 +98,6 @@ acpi_os_table_override(struct acpi_table_header *existing_table, /* * Spinlock primitives */ -acpi_status acpi_os_create_lock(acpi_spinlock * out_handle); - void acpi_os_delete_lock(acpi_spinlock handle); acpi_cpu_flags acpi_os_acquire_lock(acpi_spinlock handle); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 7774e6d8fddd..050a7bccb836 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -245,8 +245,6 @@ int acpi_check_resource_conflict(const struct resource *res); int acpi_check_region(resource_size_t start, resource_size_t n, const char *name); -int acpi_check_mem_region(resource_size_t start, resource_size_t n, - const char *name); int acpi_resources_are_enforced(void); @@ -347,12 +345,6 @@ static inline int acpi_check_region(resource_size_t start, resource_size_t n, return 0; } -static inline int acpi_check_mem_region(resource_size_t start, - resource_size_t n, const char *name) -{ - return 0; -} - struct acpi_table_header; static inline int acpi_table_parse(char *id, int (*handler)(struct acpi_table_header *)) |