diff options
-rw-r--r-- | drivers/ide/Kconfig | 1 | ||||
-rw-r--r-- | drivers/ide/ide-floppy.c | 2 | ||||
-rw-r--r-- | drivers/ide/pci/generic.c | 7 | ||||
-rw-r--r-- | drivers/ide/pci/serverworks.c | 23 | ||||
-rw-r--r-- | drivers/ide/ppc/pmac.c | 2 | ||||
-rw-r--r-- | drivers/ide/setup-pci.c | 1 | ||||
-rw-r--r-- | include/linux/pci_ids.h | 6 |
7 files changed, 39 insertions, 3 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 5f33df47aa74..1cadd2c3cadd 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -764,6 +764,7 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST config BLK_DEV_IDEDMA_PMAC bool "PowerMac IDE DMA support" depends on BLK_DEV_IDE_PMAC + select BLK_DEV_IDEDMA_PCI help This option allows the driver for the built-in IDE controller on Power Macintoshes and PowerBooks to use DMA (direct memory access) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 9eab6426148e..29c22fc278c6 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -317,7 +317,7 @@ typedef struct ide_floppy_obj { unsigned long flags; } idefloppy_floppy_t; -#define IDEFLOPPY_TICKS_DELAY 3 /* default delay for ZIP 100 */ +#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */ /* * Floppy flag bits values. diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c index da46577380f3..6e3ab0c38c4d 100644 --- a/drivers/ide/pci/generic.c +++ b/drivers/ide/pci/generic.c @@ -173,6 +173,12 @@ static ide_pci_device_t generic_chipsets[] __devinitdata = { .channels = 2, .autodma = NOAUTODMA, .bootable = ON_BOARD, + },{ /* 14 */ + .name = "Revolution", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, } }; @@ -231,6 +237,7 @@ static struct pci_device_id generic_pci_tbl[] = { { PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11}, { PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12}, { PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13}, + { PCI_VENDOR_ID_NETCELL,PCI_DEVICE_ID_REVOLUTION, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14}, /* Must come last. If you add entries adjust this table appropriately and the init_one code */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0}, { 0, }, diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index c6f5fa4b4ca6..ff2e217a8c84 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -21,6 +21,9 @@ * * CSB6: `Champion South Bridge' IDE Interface (optional: third channel) * + * HT1000: AKA BCM5785 - Hypertransport Southbridge for Opteron systems. IDE + * controller same as the CSB6. Single channel ATA100 only. + * * Documentation: * Available under NDA only. Errata info very hard to get. * @@ -71,6 +74,8 @@ static u8 svwks_ratemask (ide_drive_t *drive) if (!svwks_revision) pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision); + if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) + return 2; if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { u32 reg = 0; if (isa_dev) @@ -109,6 +114,7 @@ static u8 svwks_csb_check (struct pci_dev *dev) case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE: case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE: case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2: + case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE: return 1; default: break; @@ -438,6 +444,13 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; pci_write_config_byte(dev, 0x5A, btr); } + /* Setup HT1000 SouthBridge Controller - Single Channel Only */ + else if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) { + pci_read_config_byte(dev, 0x5A, &btr); + btr &= ~0x40; + btr |= 0x3; + pci_write_config_byte(dev, 0x5A, btr); + } return (dev->irq) ? dev->irq : 0; } @@ -629,6 +642,15 @@ static ide_pci_device_t serverworks_chipsets[] __devinitdata = { .channels = 1, /* 2 */ .autodma = AUTODMA, .bootable = ON_BOARD, + },{ /* 4 */ + .name = "SvrWks HT1000", + .init_setup = init_setup_svwks, + .init_chipset = init_chipset_svwks, + .init_hwif = init_hwif_svwks, + .init_dma = init_dma_svwks, + .channels = 1, /* 2 */ + .autodma = AUTODMA, + .bootable = ON_BOARD, } }; @@ -653,6 +675,7 @@ static struct pci_device_id svwks_pci_tbl[] = { { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3}, + { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, { 0, }, }; MODULE_DEVICE_TABLE(pci, svwks_pci_tbl); diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index be0fcc8f4b15..ea65b070a367 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1664,7 +1664,7 @@ static struct macio_driver pmac_ide_macio_driver = }; static struct pci_device_id pmac_ide_pci_match[] = { - { PCI_VENDOR_ID_APPLE, PCI_DEVIEC_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_ATA, diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 77da827b2898..18ed7765417c 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -229,6 +229,7 @@ second_chance_to_dma: case PCI_DEVICE_ID_AMD_VIPER_7409: case PCI_DEVICE_ID_CMD_643: case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE: + case PCI_DEVICE_ID_REVOLUTION: simplex_stat = hwif->INB(dma_base + 2); hwif->OUTB((simplex_stat&0x60),(dma_base + 2)); simplex_stat = hwif->INB(dma_base + 2); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 51e61e96051c..927ed487630d 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -881,7 +881,7 @@ #define PCI_DEVICE_ID_APPLE_UNI_N_PCI15 0x002e #define PCI_DEVICE_ID_APPLE_UNI_N_FW2 0x0030 #define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2 0x0032 -#define PCI_DEVIEC_ID_APPLE_UNI_N_ATA 0x0033 +#define PCI_DEVICE_ID_APPLE_UNI_N_ATA 0x0033 #define PCI_DEVICE_ID_APPLE_UNI_N_AGP2 0x0034 #define PCI_DEVICE_ID_APPLE_IPID_ATA100 0x003b #define PCI_DEVICE_ID_APPLE_KEYLARGO_I 0x003e @@ -1580,6 +1580,7 @@ #define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211 #define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212 #define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213 +#define PCI_DEVICE_ID_SERVERWORKS_HT1000IDE 0x0214 #define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2 0x0217 #define PCI_DEVICE_ID_SERVERWORKS_OSB4USB 0x0220 #define PCI_DEVICE_ID_SERVERWORKS_CSB5USB PCI_DEVICE_ID_SERVERWORKS_OSB4USB @@ -2184,6 +2185,9 @@ #define PCI_VENDOR_ID_SIBYTE 0x166d #define PCI_DEVICE_ID_BCM1250_HT 0x0002 +#define PCI_VENDOR_ID_NETCELL 0x169c +#define PCI_DEVICE_ID_REVOLUTION 0x0044 + #define PCI_VENDOR_ID_LINKSYS 0x1737 #define PCI_DEVICE_ID_LINKSYS_EG1032 0x1032 #define PCI_DEVICE_ID_LINKSYS_EG1064 0x1064 |