summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/s2io-regs.h2
-rw-r--r--drivers/net/s2io.c93
-rw-r--r--drivers/net/s2io.h6
3 files changed, 98 insertions, 3 deletions
diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h
index cfa267914476..83e3e47a9e3d 100644
--- a/drivers/net/s2io-regs.h
+++ b/drivers/net/s2io-regs.h
@@ -220,7 +220,7 @@ struct XENA_dev_config {
u64 scheduled_int_ctrl;
#define SCHED_INT_CTRL_TIMER_EN BIT(0)
#define SCHED_INT_CTRL_ONE_SHOT BIT(1)
-#define SCHED_INT_CTRL_INT2MSI TBD
+#define SCHED_INT_CTRL_INT2MSI(val) vBIT(val,10,6)
#define SCHED_INT_PERIOD TBD
u64 txreqtimeout;
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index dd012322cdbe..588938204e20 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -37,7 +37,7 @@
* tx_fifo_len: This too is an array of 8. Each element defines the number of
* Tx descriptors that can be associated with each corresponding FIFO.
* intr_type: This defines the type of interrupt. The values can be 0(INTA),
- * 2(MSI_X). Default value is '0(INTA)'
+ * 2(MSI_X). Default value is '2(MSI_X)'
* lro: Specifies whether to enable Large Receive Offload (LRO) or not.
* Possible values '1' for enable '0' for disable. Default is '0'
* lro_max_pkts: This parameter defines maximum number of packets can be
@@ -428,7 +428,7 @@ S2IO_PARM_INT(l3l4hdr_size, 128);
/* Frequency of Rx desc syncs expressed as power of 2 */
S2IO_PARM_INT(rxsync_frequency, 3);
/* Interrupt type. Values can be 0(INTA), 2(MSI_X) */
-S2IO_PARM_INT(intr_type, 0);
+S2IO_PARM_INT(intr_type, 2);
/* Large receive offload feature */
S2IO_PARM_INT(lro, 0);
/* Max pkts to be aggregated by LRO at one time. If not specified,
@@ -3773,6 +3773,59 @@ static int s2io_enable_msi_x(struct s2io_nic *nic)
return 0;
}
+/* Handle software interrupt used during MSI(X) test */
+static irqreturn_t __devinit s2io_test_intr(int irq, void *dev_id)
+{
+ struct s2io_nic *sp = dev_id;
+
+ sp->msi_detected = 1;
+ wake_up(&sp->msi_wait);
+
+ return IRQ_HANDLED;
+}
+
+/* Test interrupt path by forcing a a software IRQ */
+static int __devinit s2io_test_msi(struct s2io_nic *sp)
+{
+ struct pci_dev *pdev = sp->pdev;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
+ int err;
+ u64 val64, saved64;
+
+ err = request_irq(sp->entries[1].vector, s2io_test_intr, 0,
+ sp->name, sp);
+ if (err) {
+ DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n",
+ sp->dev->name, pci_name(pdev), pdev->irq);
+ return err;
+ }
+
+ init_waitqueue_head (&sp->msi_wait);
+ sp->msi_detected = 0;
+
+ saved64 = val64 = readq(&bar0->scheduled_int_ctrl);
+ val64 |= SCHED_INT_CTRL_ONE_SHOT;
+ val64 |= SCHED_INT_CTRL_TIMER_EN;
+ val64 |= SCHED_INT_CTRL_INT2MSI(1);
+ writeq(val64, &bar0->scheduled_int_ctrl);
+
+ wait_event_timeout(sp->msi_wait, sp->msi_detected, HZ/10);
+
+ if (!sp->msi_detected) {
+ /* MSI(X) test failed, go back to INTx mode */
+ DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated"
+ "using MSI(X) during test\n", sp->dev->name,
+ pci_name(pdev));
+
+ err = -EOPNOTSUPP;
+ }
+
+ free_irq(sp->entries[1].vector, sp);
+
+ writeq(saved64, &bar0->scheduled_int_ctrl);
+
+ return err;
+}
/* ********************************************************* *
* Functions defined below concern the OS part of the driver *
* ********************************************************* */
@@ -3803,6 +3856,42 @@ static int s2io_open(struct net_device *dev)
napi_enable(&sp->napi);
+ if (sp->intr_type == MSI_X) {
+ int ret = s2io_enable_msi_x(sp);
+
+ if (!ret) {
+ u16 msi_control;
+
+ ret = s2io_test_msi(sp);
+
+ /* rollback MSI-X, will re-enable during add_isr() */
+ kfree(sp->entries);
+ sp->mac_control.stats_info->sw_stat.mem_freed +=
+ (MAX_REQUESTED_MSI_X *
+ sizeof(struct msix_entry));
+ kfree(sp->s2io_entries);
+ sp->mac_control.stats_info->sw_stat.mem_freed +=
+ (MAX_REQUESTED_MSI_X *
+ sizeof(struct s2io_msix_entry));
+ sp->entries = NULL;
+ sp->s2io_entries = NULL;
+
+ pci_read_config_word(sp->pdev, 0x42, &msi_control);
+ msi_control &= 0xFFFE; /* Disable MSI */
+ pci_write_config_word(sp->pdev, 0x42, msi_control);
+
+ pci_disable_msix(sp->pdev);
+
+ }
+ if (ret) {
+
+ DBG_PRINT(ERR_DBG,
+ "%s: MSI-X requested but failed to enable\n",
+ dev->name);
+ sp->intr_type = INTA;
+ }
+ }
+
/* Initialize H/W and enable interrupts */
err = s2io_card_up(sp);
if (err) {
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 420fefb99188..62398fab2e96 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -412,6 +412,10 @@ struct config_param {
struct tx_fifo_config tx_cfg[MAX_TX_FIFOS]; /*Per-Tx FIFO config */
u32 max_txds; /*Max no. of Tx buffer descriptor per TxDL */
u64 tx_intr_type;
+#define INTA 0
+#define MSI_X 2
+ u8 intr_type;
+
/* Specifies if Tx Intr is UTILZ or PER_LIST type. */
/* Rx Side */
@@ -862,6 +866,8 @@ struct s2io_nic {
struct vlan_group *vlgrp;
#define MSIX_FLG 0xA5
struct msix_entry *entries;
+ int msi_detected;
+ wait_queue_head_t msi_wait;
struct s2io_msix_entry *s2io_entries;
char desc[MAX_REQUESTED_MSI_X][25];