diff options
75 files changed, 5781 insertions, 1845 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index fcb587f825cc..cac83a694880 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -18,12 +18,14 @@ #include <linux/amba/pl022.h> #include <linux/spi/spi.h> #include <linux/mfd/ab8500.h> +#include <linux/input/matrix_keypad.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <plat/pincfg.h> #include <plat/i2c.h> +#include <plat/ske.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -49,6 +51,24 @@ static pin_cfg_t mop500_pins[] = { GPIO11_I2C2_SCL, GPIO229_I2C3_SDA, GPIO230_I2C3_SCL, + + /* SKE keypad */ + GPIO153_KP_I7, + GPIO154_KP_I6, + GPIO155_KP_I5, + GPIO156_KP_I4, + GPIO157_KP_O7, + GPIO158_KP_O6, + GPIO159_KP_O5, + GPIO160_KP_O4, + GPIO161_KP_I3, + GPIO162_KP_I2, + GPIO163_KP_I1, + GPIO164_KP_I0, + GPIO165_KP_O3, + GPIO166_KP_O2, + GPIO167_KP_O1, + GPIO168_KP_O0, }; static void ab4500_spi_cs_control(u32 command) @@ -148,12 +168,120 @@ static struct amba_device *amba_devs[] __initdata = { &u8500_ssp0_device, }; +static const unsigned int ux500_keymap[] = { + KEY(2, 5, KEY_END), + KEY(4, 1, KEY_POWER), + KEY(3, 5, KEY_VOLUMEDOWN), + KEY(1, 3, KEY_3), + KEY(5, 2, KEY_RIGHT), + KEY(5, 0, KEY_9), + + KEY(0, 5, KEY_MENU), + KEY(7, 6, KEY_ENTER), + KEY(4, 5, KEY_0), + KEY(6, 7, KEY_2), + KEY(3, 4, KEY_UP), + KEY(3, 3, KEY_DOWN), + + KEY(6, 4, KEY_SEND), + KEY(6, 2, KEY_BACK), + KEY(4, 2, KEY_VOLUMEUP), + KEY(5, 5, KEY_1), + KEY(4, 3, KEY_LEFT), + KEY(3, 2, KEY_7), +}; + +static const struct matrix_keymap_data ux500_keymap_data = { + .keymap = ux500_keymap, + .keymap_size = ARRAY_SIZE(ux500_keymap), +}; + +/* + * Nomadik SKE keypad + */ +#define ROW_PIN_I0 164 +#define ROW_PIN_I1 163 +#define ROW_PIN_I2 162 +#define ROW_PIN_I3 161 +#define ROW_PIN_I4 156 +#define ROW_PIN_I5 155 +#define ROW_PIN_I6 154 +#define ROW_PIN_I7 153 +#define COL_PIN_O0 168 +#define COL_PIN_O1 167 +#define COL_PIN_O2 166 +#define COL_PIN_O3 165 +#define COL_PIN_O4 160 +#define COL_PIN_O5 159 +#define COL_PIN_O6 158 +#define COL_PIN_O7 157 + +#define SKE_KPD_MAX_ROWS 8 +#define SKE_KPD_MAX_COLS 8 + +static int ske_kp_rows[] = { + ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3, + ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7, +}; + +/* + * ske_set_gpio_row: request and set gpio rows + */ +static int ske_set_gpio_row(int gpio) +{ + int ret; + + ret = gpio_request(gpio, "ske-kp"); + if (ret < 0) { + pr_err("ske_set_gpio_row: gpio request failed\n"); + return ret; + } + + ret = gpio_direction_output(gpio, 1); + if (ret < 0) { + pr_err("ske_set_gpio_row: gpio direction failed\n"); + gpio_free(gpio); + } + + return ret; +} + +/* + * ske_kp_init - enable the gpio configuration + */ +static int ske_kp_init(void) +{ + int ret, i; + + for (i = 0; i < SKE_KPD_MAX_ROWS; i++) { + ret = ske_set_gpio_row(ske_kp_rows[i]); + if (ret < 0) { + pr_err("ske_kp_init: failed init\n"); + return ret; + } + } + + return 0; +} + +static struct ske_keypad_platform_data ske_keypad_board = { + .init = ske_kp_init, + .keymap_data = &ux500_keymap_data, + .no_autorepeat = true, + .krow = SKE_KPD_MAX_ROWS, /* 8x8 matrix */ + .kcol = SKE_KPD_MAX_COLS, + .debounce_ms = 40, /* in millsecs */ +}; + + + /* add any platform devices here - TODO */ static struct platform_device *platform_devs[] __initdata = { &u8500_i2c0_device, &ux500_i2c1_device, &ux500_i2c2_device, &ux500_i2c3_device, + &ux500_ske_keypad_device, }; static void __init u8500_init_machine(void) @@ -168,6 +296,7 @@ static void __init u8500_init_machine(void) ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data; ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data; ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data; + ux500_ske_keypad_device.dev.platform_data = &ske_keypad_board; u8500_ssp0_device.dev.platform_data = &ssp0_platform_data; diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index d8ab7f184fe4..1675047daf20 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -477,6 +477,7 @@ static struct clk_lookup u8500_common_clks[] = { CLK(sdi5, "sdi5", NULL), CLK(uart2, "uart2", NULL), CLK(ske, "ske", NULL), + CLK(ske, "nmk-ske-keypad", NULL), CLK(sdi2, "sdi2", NULL), CLK(i2c0, "nmk-i2c.0", NULL), CLK(fsmc, "fsmc", NULL), diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 40032fecbc16..cbbe69a76a7c 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -292,3 +292,23 @@ void dma40_u8500ed_fixup(void) dma40_resources[1].start = U8500_DMA_LCPA_BASE_ED; dma40_resources[1].end = U8500_DMA_LCPA_BASE_ED + 2 * SZ_1K - 1; } + +struct resource keypad_resources[] = { + [0] = { + .start = U8500_SKE_BASE, + .end = U8500_SKE_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_DB8500_KB, + .end = IRQ_DB8500_KB, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device ux500_ske_keypad_device = { + .name = "nmk-ske-keypad", + .id = -1, + .num_resources = ARRAY_SIZE(keypad_resources), + .resource = keypad_resources, +}; diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h index 33a120c2e82e..b91a4d1211a2 100644 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ b/arch/arm/mach-ux500/include/mach/devices.h @@ -26,6 +26,7 @@ extern struct platform_device ux500_i2c3_device; extern struct platform_device u8500_i2c0_device; extern struct platform_device u8500_i2c4_device; extern struct platform_device u8500_dma40_device; +extern struct platform_device ux500_ske_keypad_device; extern struct amba_device u8500_sdi0_device; extern struct amba_device u8500_sdi1_device; diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h index 66f8761cc823..f923764ee16c 100644 --- a/arch/arm/mach-ux500/pins-db8500.h +++ b/arch/arm/mach-ux500/pins-db8500.h @@ -459,82 +459,82 @@ #define GPIO152_KP_O9 PIN_CFG(152, ALT_C) #define GPIO153_GPIO PIN_CFG(153, GPIO) -#define GPIO153_KP_I7 PIN_CFG(153, ALT_A) +#define GPIO153_KP_I7 PIN_CFG_PULL(153, ALT_A, DOWN) #define GPIO153_LCD_D24 PIN_CFG(153, ALT_B) #define GPIO153_U2_RXD PIN_CFG(153, ALT_C) #define GPIO154_GPIO PIN_CFG(154, GPIO) -#define GPIO154_KP_I6 PIN_CFG(154, ALT_A) +#define GPIO154_KP_I6 PIN_CFG_PULL(154, ALT_A, DOWN) #define GPIO154_LCD_D25 PIN_CFG(154, ALT_B) #define GPIO154_U2_TXD PIN_CFG(154, ALT_C) #define GPIO155_GPIO PIN_CFG(155, GPIO) -#define GPIO155_KP_I5 PIN_CFG(155, ALT_A) +#define GPIO155_KP_I5 PIN_CFG_PULL(155, ALT_A, DOWN) #define GPIO155_LCD_D26 PIN_CFG(155, ALT_B) #define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C) #define GPIO156_GPIO PIN_CFG(156, GPIO) -#define GPIO156_KP_I4 PIN_CFG(156, ALT_A) +#define GPIO156_KP_I4 PIN_CFG_PULL(156, ALT_A, DOWN) #define GPIO156_LCD_D27 PIN_CFG(156, ALT_B) #define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C) #define GPIO157_GPIO PIN_CFG(157, GPIO) -#define GPIO157_KP_O7 PIN_CFG(157, ALT_A) +#define GPIO157_KP_O7 PIN_CFG_PULL(157, ALT_A, UP) #define GPIO157_LCD_D28 PIN_CFG(157, ALT_B) #define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C) #define GPIO158_GPIO PIN_CFG(158, GPIO) -#define GPIO158_KP_O6 PIN_CFG(158, ALT_A) +#define GPIO158_KP_O6 PIN_CFG_PULL(158, ALT_A, UP) #define GPIO158_LCD_D29 PIN_CFG(158, ALT_B) #define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C) #define GPIO159_GPIO PIN_CFG(159, GPIO) -#define GPIO159_KP_O5 PIN_CFG(159, ALT_A) +#define GPIO159_KP_O5 PIN_CFG_PULL(159, ALT_A, UP) #define GPIO159_LCD_D30 PIN_CFG(159, ALT_B) #define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C) #define GPIO160_GPIO PIN_CFG(160, GPIO) -#define GPIO160_KP_O4 PIN_CFG(160, ALT_A) +#define GPIO160_KP_O4 PIN_CFG_PULL(160, ALT_A, UP) #define GPIO160_LCD_D31 PIN_CFG(160, ALT_B) #define GPIO160_NONE PIN_CFG(160, ALT_C) #define GPIO161_GPIO PIN_CFG(161, GPIO) -#define GPIO161_KP_I3 PIN_CFG(161, ALT_A) +#define GPIO161_KP_I3 PIN_CFG_PULL(161, ALT_A, DOWN) #define GPIO161_LCD_D32 PIN_CFG(161, ALT_B) #define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C) #define GPIO162_GPIO PIN_CFG(162, GPIO) -#define GPIO162_KP_I2 PIN_CFG(162, ALT_A) +#define GPIO162_KP_I2 PIN_CFG_PULL(162, ALT_A, DOWN) #define GPIO162_LCD_D33 PIN_CFG(162, ALT_B) #define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C) #define GPIO163_GPIO PIN_CFG(163, GPIO) -#define GPIO163_KP_I1 PIN_CFG(163, ALT_A) +#define GPIO163_KP_I1 PIN_CFG_PULL(163, ALT_A, DOWN) #define GPIO163_LCD_D34 PIN_CFG(163, ALT_B) #define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C) #define GPIO164_GPIO PIN_CFG(164, GPIO) -#define GPIO164_KP_I0 PIN_CFG(164, ALT_A) +#define GPIO164_KP_I0 PIN_CFG_PULL(164, ALT_A, UP) #define GPIO164_LCD_D35 PIN_CFG(164, ALT_B) #define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C) #define GPIO165_GPIO PIN_CFG(165, GPIO) -#define GPIO165_KP_O3 PIN_CFG(165, ALT_A) +#define GPIO165_KP_O3 PIN_CFG_PULL(165, ALT_A, UP) #define GPIO165_LCD_D36 PIN_CFG(165, ALT_B) #define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C) #define GPIO166_GPIO PIN_CFG(166, GPIO) -#define GPIO166_KP_O2 PIN_CFG(166, ALT_A) +#define GPIO166_KP_O2 PIN_CFG_PULL(166, ALT_A, UP) #define GPIO166_LCD_D37 PIN_CFG(166, ALT_B) #define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C) #define GPIO167_GPIO PIN_CFG(167, GPIO) -#define GPIO167_KP_O1 PIN_CFG(167, ALT_A) +#define GPIO167_KP_O1 PIN_CFG_PULL(167, ALT_A, UP) #define GPIO167_LCD_D38 PIN_CFG(167, ALT_B) #define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C) #define GPIO168_GPIO PIN_CFG(168, GPIO) -#define GPIO168_KP_O0 PIN_CFG(168, ALT_A) +#define GPIO168_KP_O0 PIN_CFG_PULL(168, ALT_A, UP) #define GPIO168_LCD_D39 PIN_CFG(168, ALT_B) #define GPIO168_NONE PIN_CFG(168, ALT_C) diff --git a/arch/arm/plat-nomadik/include/plat/ske.h b/arch/arm/plat-nomadik/include/plat/ske.h new file mode 100644 index 000000000000..31382fbc07dc --- /dev/null +++ b/arch/arm/plat-nomadik/include/plat/ske.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> + * + * ux500 Scroll key and Keypad Encoder (SKE) header + */ + +#ifndef __SKE_H +#define __SKE_H + +#include <linux/input/matrix_keypad.h> + +/* register definitions for SKE peripheral */ +#define SKE_CR 0x00 +#define SKE_VAL0 0x04 +#define SKE_VAL1 0x08 +#define SKE_DBCR 0x0C +#define SKE_IMSC 0x10 +#define SKE_RIS 0x14 +#define SKE_MIS 0x18 +#define SKE_ICR 0x1C + +/* + * Keypad module + */ + +/** + * struct keypad_platform_data - structure for platform specific data + * @init: pointer to keypad init function + * @exit: pointer to keypad deinitialisation function + * @keymap_data: matrix scan code table for keycodes + * @krow: maximum number of rows + * @kcol: maximum number of columns + * @debounce_ms: platform specific debounce time + * @no_autorepeat: flag for auto repetition + * @wakeup_enable: allow waking up the system + */ +struct ske_keypad_platform_data { + int (*init)(void); + int (*exit)(void); + const struct matrix_keymap_data *keymap_data; + u8 krow; + u8 kcol; + u8 debounce_ms; + bool no_autorepeat; + bool wakeup_enable; +}; +#endif /*__SKE_KPD_H*/ diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h new file mode 100644 index 000000000000..2b1d9bc1eebb --- /dev/null +++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h @@ -0,0 +1,14 @@ +#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H +#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H + +#include <linux/input/matrix_keypad.h> + +struct omap4_keypad_platform_data { + const struct matrix_keymap_data *keymap_data; + + u8 rows; + u8 cols; +}; + +extern int omap4_keyboard_init(struct omap4_keypad_platform_data *); +#endif diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index a7ca75212bfe..e95d7876ca6b 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -175,8 +175,7 @@ EXPORT_SYMBOL_GPL(unregister_keyboard_notifier); */ struct getset_keycode_data { - unsigned int scancode; - unsigned int keycode; + struct input_keymap_entry ke; int error; }; @@ -184,32 +183,50 @@ static int getkeycode_helper(struct input_handle *handle, void *data) { struct getset_keycode_data *d = data; - d->error = input_get_keycode(handle->dev, d->scancode, &d->keycode); + d->error = input_get_keycode(handle->dev, &d->ke); return d->error == 0; /* stop as soon as we successfully get one */ } int getkeycode(unsigned int scancode) { - struct getset_keycode_data d = { scancode, 0, -ENODEV }; + struct getset_keycode_data d = { + .ke = { + .flags = 0, + .len = sizeof(scancode), + .keycode = 0, + }, + .error = -ENODEV, + }; + + memcpy(d.ke.scancode, &scancode, sizeof(scancode)); input_handler_for_each_handle(&kbd_handler, &d, getkeycode_helper); - return d.error ?: d.keycode; + return d.error ?: d.ke.keycode; } static int setkeycode_helper(struct input_handle *handle, void *data) { struct getset_keycode_data *d = data; - d->error = input_set_keycode(handle->dev, d->scancode, d->keycode); + d->error = input_set_keycode(handle->dev, &d->ke); return d->error == 0; /* stop as soon as we successfully set one */ } int setkeycode(unsigned int scancode, unsigned int keycode) { - struct getset_keycode_data d = { scancode, keycode, -ENODEV }; + struct getset_keycode_data d = { + .ke = { + .flags = 0, + .len = sizeof(scancode), + .keycode = keycode, + }, + .error = -ENODEV, + }; + + memcpy(d.ke.scancode, &scancode, sizeof(scancode)); input_handler_for_each_handle(&kbd_handler, &d, setkeycode_helper); diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c index f3019f53e875..eaa5d3efa79d 100644 --- a/drivers/char/sysrq.c +++ b/drivers/char/sysrq.c @@ -566,10 +566,16 @@ static const unsigned char sysrq_xlate[KEY_MAX + 1] = static bool sysrq_down; static int sysrq_alt_use; static int sysrq_alt; +static DEFINE_SPINLOCK(sysrq_event_lock); static bool sysrq_filter(struct input_handle *handle, unsigned int type, unsigned int code, int value) { + bool suppress; + + /* We are called with interrupts disabled, just take the lock */ + spin_lock(&sysrq_event_lock); + if (type != EV_KEY) goto out; @@ -601,7 +607,10 @@ static bool sysrq_filter(struct input_handle *handle, unsigned int type, } out: - return sysrq_down; + suppress = sysrq_down; + spin_unlock(&sysrq_event_lock); + + return suppress; } static int sysrq_connect(struct input_handler *handler, @@ -652,8 +661,8 @@ static void sysrq_disconnect(struct input_handle *handle) } /* - * We are matching on KEY_LEFTALT insteard of KEY_SYSRQ because not all - * keyboards have SysRq ikey predefined and so user may add it to keymap + * We are matching on KEY_LEFTALT instead of KEY_SYSRQ because not all + * keyboards have SysRq key predefined and so user may add it to keymap * later, but we expect all such keyboards to have left alt. */ static const struct input_device_id sysrq_ids[] = { diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 7832b6e2478b..515345b11ac9 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1780,6 +1780,11 @@ static bool hid_ignore(struct hid_device *hdev) hdev->product <= USB_DEVICE_ID_SOUNDGRAPH_IMON_LAST) return true; break; + case USB_VENDOR_ID_HANWANG: + if (hdev->product >= USB_DEVICE_ID_HANWANG_TABLET_FIRST && + hdev->product <= USB_DEVICE_ID_HANWANG_TABLET_LAST) + return true; + break; } if (hdev->type == HID_TYPE_USBMOUSE && diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 3ee999d33004..3341baa86a30 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -299,6 +299,10 @@ #define USB_DEVICE_ID_GYRATION_REMOTE_2 0x0003 #define USB_DEVICE_ID_GYRATION_REMOTE_3 0x0008 +#define USB_VENDOR_ID_HANWANG 0x0b57 +#define USB_DEVICE_ID_HANWANG_TABLET_FIRST 0x5000 +#define USB_DEVICE_ID_HANWANG_TABLET_LAST 0x8fff + #define USB_VENDOR_ID_HAPP 0x078b #define USB_DEVICE_ID_UGCI_DRIVING 0x0010 #define USB_DEVICE_ID_UGCI_FLYING 0x0020 diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c index 834ef47b76d6..bb0b3659437b 100644 --- a/drivers/hid/hid-input.c +++ b/drivers/hid/hid-input.c @@ -68,39 +68,52 @@ static const struct { #define map_key_clear(c) hid_map_usage_clear(hidinput, usage, &bit, \ &max, EV_KEY, (c)) -static inline int match_scancode(unsigned int code, unsigned int scancode) +static bool match_scancode(struct hid_usage *usage, + unsigned int cur_idx, unsigned int scancode) { - if (scancode == 0) - return 1; - - return (code & (HID_USAGE_PAGE | HID_USAGE)) == scancode; + return (usage->hid & (HID_USAGE_PAGE | HID_USAGE)) == scancode; } -static inline int match_keycode(unsigned int code, unsigned int keycode) +static bool match_keycode(struct hid_usage *usage, + unsigned int cur_idx, unsigned int keycode) { - if (keycode == 0) - return 1; + /* + * We should exclude unmapped usages when doing lookup by keycode. + */ + return (usage->type == EV_KEY && usage->code == keycode); +} - return code == keycode; +static bool match_index(struct hid_usage *usage, + unsigned int cur_idx, unsigned int idx) +{ + return cur_idx == idx; } +typedef bool (*hid_usage_cmp_t)(struct hid_usage *usage, + unsigned int cur_idx, unsigned int val); + static struct hid_usage *hidinput_find_key(struct hid_device *hid, - unsigned int scancode, - unsigned int keycode) + hid_usage_cmp_t match, + unsigned int value, + unsigned int *usage_idx) { - int i, j, k; + unsigned int i, j, k, cur_idx = 0; struct hid_report *report; struct hid_usage *usage; for (k = HID_INPUT_REPORT; k <= HID_OUTPUT_REPORT; k++) { list_for_each_entry(report, &hid->report_enum[k].report_list, list) { for (i = 0; i < report->maxfield; i++) { - for ( j = 0; j < report->field[i]->maxusage; j++) { + for (j = 0; j < report->field[i]->maxusage; j++) { usage = report->field[i]->usage + j; - if (usage->type == EV_KEY && - match_scancode(usage->hid, scancode) && - match_keycode(usage->code, keycode)) - return usage; + if (usage->type == EV_KEY || usage->type == 0) { + if (match(usage, cur_idx, value)) { + if (usage_idx) + *usage_idx = cur_idx; + return usage; + } + cur_idx++; + } } } } @@ -108,39 +121,68 @@ static struct hid_usage *hidinput_find_key(struct hid_device *hid, return NULL; } +static struct hid_usage *hidinput_locate_usage(struct hid_device *hid, + const struct input_keymap_entry *ke, + unsigned int *index) +{ + struct hid_usage *usage; + unsigned int scancode; + + if (ke->flags & INPUT_KEYMAP_BY_INDEX) + usage = hidinput_find_key(hid, match_index, ke->index, index); + else if (input_scancode_to_scalar(ke, &scancode) == 0) + usage = hidinput_find_key(hid, match_scancode, scancode, index); + else + usage = NULL; + + return usage; +} + static int hidinput_getkeycode(struct input_dev *dev, - unsigned int scancode, unsigned int *keycode) + struct input_keymap_entry *ke) { struct hid_device *hid = input_get_drvdata(dev); struct hid_usage *usage; + unsigned int scancode, index; - usage = hidinput_find_key(hid, scancode, 0); + usage = hidinput_locate_usage(hid, ke, &index); if (usage) { - *keycode = usage->code; + ke->keycode = usage->type == EV_KEY ? + usage->code : KEY_RESERVED; + ke->index = index; + scancode = usage->hid & (HID_USAGE_PAGE | HID_USAGE); + ke->len = sizeof(scancode); + memcpy(ke->scancode, &scancode, sizeof(scancode)); return 0; } + return -EINVAL; } static int hidinput_setkeycode(struct input_dev *dev, - unsigned int scancode, unsigned int keycode) + const struct input_keymap_entry *ke, + unsigned int *old_keycode) { struct hid_device *hid = input_get_drvdata(dev); struct hid_usage *usage; - int old_keycode; - usage = hidinput_find_key(hid, scancode, 0); + usage = hidinput_locate_usage(hid, ke, NULL); if (usage) { - old_keycode = usage->code; - usage->code = keycode; + *old_keycode = usage->type == EV_KEY ? + usage->code : KEY_RESERVED; + usage->code = ke->keycode; - clear_bit(old_keycode, dev->keybit); + clear_bit(*old_keycode, dev->keybit); set_bit(usage->code, dev->keybit); - dbg_hid(KERN_DEBUG "Assigned keycode %d to HID usage code %x\n", keycode, scancode); - /* Set the keybit for the old keycode if the old keycode is used - * by another key */ - if (hidinput_find_key (hid, 0, old_keycode)) - set_bit(old_keycode, dev->keybit); + dbg_hid(KERN_DEBUG "Assigned keycode %d to HID usage code %x\n", + usage->code, usage->hid); + + /* + * Set the keybit for the old keycode if the old keycode is used + * by another key + */ + if (hidinput_find_key(hid, match_keycode, *old_keycode, NULL)) + set_bit(*old_keycode, dev->keybit); return 0; } @@ -835,8 +877,8 @@ int hidinput_connect(struct hid_device *hid, unsigned int force) hid->ll_driver->hidinput_input_event; input_dev->open = hidinput_open; input_dev->close = hidinput_close; - input_dev->setkeycode = hidinput_setkeycode; - input_dev->getkeycode = hidinput_getkeycode; + input_dev->setkeycode_new = hidinput_setkeycode; + input_dev->getkeycode_new = hidinput_getkeycode; input_dev->name = hid->name; input_dev->phys = hid->phys; diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 535fea4fe67f..e3f7fc6f9565 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -534,6 +534,80 @@ static int handle_eviocgbit(struct input_dev *dev, } #undef OLD_KEY_MAX +static int evdev_handle_get_keycode(struct input_dev *dev, + void __user *p, size_t size) +{ + struct input_keymap_entry ke; + int error; + + memset(&ke, 0, sizeof(ke)); + + if (size == sizeof(unsigned int[2])) { + /* legacy case */ + int __user *ip = (int __user *)p; + + if (copy_from_user(ke.scancode, p, sizeof(unsigned int))) + return -EFAULT; + + ke.len = sizeof(unsigned int); + ke.flags = 0; + + error = input_get_keycode(dev, &ke); + if (error) + return error; + + if (put_user(ke.keycode, ip + 1)) + return -EFAULT; + + } else { + size = min(size, sizeof(ke)); + + if (copy_from_user(&ke, p, size)) + return -EFAULT; + + error = input_get_keycode(dev, &ke); + if (error) + return error; + + if (copy_to_user(p, &ke, size)) + return -EFAULT; + } + return 0; +} + +static int evdev_handle_set_keycode(struct input_dev *dev, + void __user *p, size_t size) +{ + struct input_keymap_entry ke; + + memset(&ke, 0, sizeof(ke)); + + if (size == sizeof(unsigned int[2])) { + /* legacy case */ + int __user *ip = (int __user *)p; + + if (copy_from_user(ke.scancode, p, sizeof(unsigned int))) + return -EFAULT; + + if (get_user(ke.keycode, ip + 1)) + return -EFAULT; + + ke.len = sizeof(unsigned int); + ke.flags = 0; + + } else { + size = min(size, sizeof(ke)); + + if (copy_from_user(&ke, p, size)) + return -EFAULT; + + if (ke.len > sizeof(ke.scancode)) + return -EINVAL; + } + + return input_set_keycode(dev, &ke); +} + static long evdev_do_ioctl(struct file *file, unsigned int cmd, void __user *p, int compat_mode) { @@ -580,25 +654,6 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, return 0; - case EVIOCGKEYCODE: - if (get_user(t, ip)) - return -EFAULT; - - error = input_get_keycode(dev, t, &v); - if (error) - return error; - - if (put_user(v, ip + 1)) - return -EFAULT; - - return 0; - - case EVIOCSKEYCODE: - if (get_user(t, ip) || get_user(v, ip + 1)) - return -EFAULT; - - return input_set_keycode(dev, t, v); - case EVIOCRMFF: return input_ff_erase(dev, (int)(unsigned long) p, file); @@ -620,7 +675,6 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, /* Now check variable-length commands */ #define EVIOC_MASK_SIZE(nr) ((nr) & ~(_IOC_SIZEMASK << _IOC_SIZESHIFT)) - switch (EVIOC_MASK_SIZE(cmd)) { case EVIOCGKEY(0): @@ -654,6 +708,12 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, return -EFAULT; return error; + + case EVIOC_MASK_SIZE(EVIOCGKEYCODE): + return evdev_handle_get_keycode(dev, p, size); + + case EVIOC_MASK_SIZE(EVIOCSKEYCODE): + return evdev_handle_set_keycode(dev, p, size); } /* Multi-number variable-length handlers */ diff --git a/drivers/input/gameport/emu10k1-gp.c b/drivers/input/gameport/emu10k1-gp.c index 7392992da424..422aa0a6b77f 100644 --- a/drivers/input/gameport/emu10k1-gp.c +++ b/drivers/input/gameport/emu10k1-gp.c @@ -59,44 +59,52 @@ MODULE_DEVICE_TABLE(pci, emu_tbl); static int __devinit emu_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { - int ioport, iolen; struct emu *emu; struct gameport *port; - - if (pci_enable_device(pdev)) - return -EBUSY; - - ioport = pci_resource_start(pdev, 0); - iolen = pci_resource_len(pdev, 0); - - if (!request_region(ioport, iolen, "emu10k1-gp")) - return -EBUSY; + int error; emu = kzalloc(sizeof(struct emu), GFP_KERNEL); port = gameport_allocate_port(); if (!emu || !port) { printk(KERN_ERR "emu10k1-gp: Memory allocation failed\n"); - release_region(ioport, iolen); - kfree(emu); - gameport_free_port(port); - return -ENOMEM; + error = -ENOMEM; + goto err_out_free; } - emu->io = ioport; - emu->size = iolen; + error = pci_enable_device(pdev); + if (error) + goto err_out_free; + + emu->io = pci_resource_start(pdev, 0); + emu->size = pci_resource_len(pdev, 0); + emu->dev = pdev; emu->gameport = port; gameport_set_name(port, "EMU10K1"); gameport_set_phys(port, "pci%s/gameport0", pci_name(pdev)); port->dev.parent = &pdev->dev; - port->io = ioport; + port->io = emu->io; + + if (!request_region(emu->io, emu->size, "emu10k1-gp")) { + printk(KERN_ERR "emu10k1-gp: unable to grab region 0x%x-0x%x\n", + emu->io, emu->io + emu->size - 1); + error = -EBUSY; + goto err_out_disable_dev; + } pci_set_drvdata(pdev, emu); gameport_register_port(port); return 0; + + err_out_disable_dev: + pci_disable_device(pdev); + err_out_free: + gameport_free_port(port); + kfree(emu); + return error; } static void __devexit emu_remove(struct pci_dev *pdev) @@ -106,6 +114,8 @@ static void __devexit emu_remove(struct pci_dev *pdev) gameport_unregister_port(emu->gameport); release_region(emu->io, emu->size); kfree(emu); + + pci_disable_device(pdev); } static struct pci_driver emu_driver = { diff --git a/drivers/input/gameport/fm801-gp.c b/drivers/input/gameport/fm801-gp.c index 14d3f3e208a2..a3b70ff21018 100644 --- a/drivers/input/gameport/fm801-gp.c +++ b/drivers/input/gameport/fm801-gp.c @@ -133,11 +133,11 @@ static void __devexit fm801_gp_remove(struct pci_dev *pci) { struct fm801_gp *gp = pci_get_drvdata(pci); - if (gp) { - gameport_unregister_port(gp->gameport); - release_resource(gp->res_port); - kfree(gp); - } + gameport_unregister_port(gp->gameport); + release_resource(gp->res_port); + kfree(gp); + + pci_disable_device(pci); } static const struct pci_device_id fm801_gp_id_table[] = { diff --git a/drivers/input/input.c b/drivers/input/input.c index 7919c2537225..d092ef9291da 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -171,7 +171,7 @@ static int input_handle_abs_event(struct input_dev *dev, if (code == ABS_MT_SLOT) { /* * "Stage" the event; we'll flush it later, when we - * get actiual touch data. + * get actual touch data. */ if (*pval >= 0 && *pval < dev->mtsize) dev->slot = *pval; @@ -188,7 +188,7 @@ static int input_handle_abs_event(struct input_dev *dev, pold = &mtslot->abs[code - ABS_MT_FIRST]; } else { /* - * Bypass filtering for multitouch events when + * Bypass filtering for multi-touch events when * not employing slots. */ pold = NULL; @@ -634,78 +634,141 @@ static void input_disconnect_device(struct input_dev *dev) spin_unlock_irq(&dev->event_lock); } -static int input_fetch_keycode(struct input_dev *dev, int scancode) +/** + * input_scancode_to_scalar() - converts scancode in &struct input_keymap_entry + * @ke: keymap entry containing scancode to be converted. + * @scancode: pointer to the location where converted scancode should + * be stored. + * + * This function is used to convert scancode stored in &struct keymap_entry + * into scalar form understood by legacy keymap handling methods. These + * methods expect scancodes to be represented as 'unsigned int'. + */ +int input_scancode_to_scalar(const struct input_keymap_entry *ke, + unsigned int *scancode) +{ + switch (ke->len) { + case 1: + *scancode = *((u8 *)ke->scancode); + break; + + case 2: + *scancode = *((u16 *)ke->scancode); + break; + + case 4: + *scancode = *((u32 *)ke->scancode); + break; + + default: + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL(input_scancode_to_scalar); + +/* + * Those routines handle the default case where no [gs]etkeycode() is + * defined. In this case, an array indexed by the scancode is used. + */ + +static unsigned int input_fetch_keycode(struct input_dev *dev, + unsigned int index) { switch (dev->keycodesize) { - case 1: - return ((u8 *)dev->keycode)[scancode]; + case 1: + return ((u8 *)dev->keycode)[index]; - case 2: - return ((u16 *)dev->keycode)[scancode]; + case 2: + return ((u16 *)dev->keycode)[index]; - default: - return ((u32 *)dev->keycode)[scancode]; + default: + return ((u32 *)dev->keycode)[index]; } } static int input_default_getkeycode(struct input_dev *dev, - unsigned int scancode, - unsigned int *keycode) + struct input_keymap_entry *ke) { + unsigned int index; + int error; + if (!dev->keycodesize) return -EINVAL; - if (scancode >= dev->keycodemax) + if (ke->flags & INPUT_KEYMAP_BY_INDEX) + index = ke->index; + else { + error = input_scancode_to_scalar(ke, &index); + if (error) + return error; + } + + if (index >= dev->keycodemax) return -EINVAL; - *keycode = input_fetch_keycode(dev, scancode); + ke->keycode = input_fetch_keycode(dev, index); + ke->index = index; + ke->len = sizeof(index); + memcpy(ke->scancode, &index, sizeof(index)); return 0; } static int input_default_setkeycode(struct input_dev *dev, - unsigned int scancode, - unsigned int keycode) + const struct input_keymap_entry *ke, + unsigned int *old_keycode) { - int old_keycode; + unsigned int index; + int error; int i; - if (scancode >= dev->keycodemax) + if (!dev->keycodesize) return -EINVAL; - if (!dev->keycodesize) + if (ke->flags & INPUT_KEYMAP_BY_INDEX) { + index = ke->index; + } else { + error = input_scancode_to_scalar(ke, &index); + if (error) + return error; + } + + if (index >= dev->keycodemax) return -EINVAL; - if (dev->keycodesize < sizeof(keycode) && (keycode >> (dev->keycodesize * 8))) + if (dev->keycodesize < sizeof(dev->keycode) && + (ke->keycode >> (dev->keycodesize * 8))) return -EINVAL; switch (dev->keycodesize) { case 1: { u8 *k = (u8 *)dev->keycode; - old_keycode = k[scancode]; - k[scancode] = keycode; + *old_keycode = k[index]; + k[index] = ke->keycode; break; } case 2: { u16 *k = (u16 *)dev->keycode; - old_keycode = k[scancode]; - k[scancode] = keycode; + *old_keycode = k[index]; + k[index] = ke->keycode; break; } default: { u32 *k = (u32 *)dev->keycode; - old_keycode = k[scancode]; - k[scancode] = keycode; + *old_keycode = k[index]; + k[index] = ke->keycode; break; } } - __clear_bit(old_keycode, dev->keybit); - __set_bit(keycode, dev->keybit); + __clear_bit(*old_keycode, dev->keybit); + __set_bit(ke->keycode, dev->keybit); for (i = 0; i < dev->keycodemax; i++) { - if (input_fetch_keycode(dev, i) == old_keycode) { - __set_bit(old_keycode, dev->keybit); + if (input_fetch_keycode(dev, i) == *old_keycode) { + __set_bit(*old_keycode, dev->keybit); break; /* Setting the bit twice is useless, so break */ } } @@ -716,53 +779,86 @@ static int input_default_setkeycode(struct input_dev *dev, /** * input_get_keycode - retrieve keycode currently mapped to a given scancode * @dev: input device which keymap is being queried - * @scancode: scancode (or its equivalent for device in question) for which - * keycode is needed - * @keycode: result + * @ke: keymap entry * * This function should be called by anyone interested in retrieving current - * keymap. Presently keyboard and evdev handlers use it. + * keymap. Presently evdev handlers use it. */ -int input_get_keycode(struct input_dev *dev, - unsigned int scancode, unsigned int *keycode) +int input_get_keycode(struct input_dev *dev, struct input_keymap_entry *ke) { unsigned long flags; int retval; spin_lock_irqsave(&dev->event_lock, flags); - retval = dev->getkeycode(dev, scancode, keycode); - spin_unlock_irqrestore(&dev->event_lock, flags); + if (dev->getkeycode) { + /* + * Support for legacy drivers, that don't implement the new + * ioctls + */ + u32 scancode = ke->index; + + memcpy(ke->scancode, &scancode, sizeof(scancode)); + ke->len = sizeof(scancode); + retval = dev->getkeycode(dev, scancode, &ke->keycode); + } else { + retval = dev->getkeycode_new(dev, ke); + } + + spin_unlock_irqrestore(&dev->event_lock, flags); return retval; } EXPORT_SYMBOL(input_get_keycode); /** - * input_get_keycode - assign new keycode to a given scancode + * input_set_keycode - attribute a keycode to a given scancode * @dev: input device which keymap is being updated - * @scancode: scancode (or its equivalent for device in question) - * @keycode: new keycode to be assigned to the scancode + * @ke: new keymap entry * * This function should be called by anyone needing to update current * keymap. Presently keyboard and evdev handlers use it. */ int input_set_keycode(struct input_dev *dev, - unsigned int scancode, unsigned int keycode) + const struct input_keymap_entry *ke) { unsigned long flags; unsigned int old_keycode; int retval; - if (keycode > KEY_MAX) + if (ke->keycode > KEY_MAX) return -EINVAL; spin_lock_irqsave(&dev->event_lock, flags); - retval = dev->getkeycode(dev, scancode, &old_keycode); - if (retval) - goto out; + if (dev->setkeycode) { + /* + * Support for legacy drivers, that don't implement the new + * ioctls + */ + unsigned int scancode; + + retval = input_scancode_to_scalar(ke, &scancode); + if (retval) + goto out; + + /* + * We need to know the old scancode, in order to generate a + * keyup effect, if the set operation happens successfully + */ + if (!dev->getkeycode) { + retval = -EINVAL; + goto out; + } + + retval = dev->getkeycode(dev, scancode, &old_keycode); + if (retval) + goto out; + + retval = dev->setkeycode(dev, scancode, ke->keycode); + } else { + retval = dev->setkeycode_new(dev, ke, &old_keycode); + } - retval = dev->setkeycode(dev, scancode, keycode); if (retval) goto out; @@ -1601,7 +1697,7 @@ EXPORT_SYMBOL(input_free_device); * * This function allocates all necessary memory for MT slot handling in the * input device, and adds ABS_MT_SLOT to the device capabilities. All slots - * are initially marked as unused iby setting ABS_MT_TRACKING_ID to -1. + * are initially marked as unused by setting ABS_MT_TRACKING_ID to -1. */ int input_mt_create_slots(struct input_dev *dev, unsigned int num_slots) { @@ -1759,11 +1855,11 @@ int input_register_device(struct input_dev *dev) dev->rep[REP_PERIOD] = 33; } - if (!dev->getkeycode) - dev->getkeycode = input_default_getkeycode; + if (!dev->getkeycode && !dev->getkeycode_new) + dev->getkeycode_new = input_default_getkeycode; - if (!dev->setkeycode) - dev->setkeycode = input_default_setkeycode; + if (!dev->setkeycode && !dev->setkeycode_new) + dev->setkeycode_new = input_default_setkeycode; dev_set_name(&dev->dev, "input%ld", (unsigned long) atomic_inc_return(&input_no) - 1); diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index aa037fec2f86..0426630f0e98 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -327,6 +327,16 @@ config KEYBOARD_NEWTON To compile this driver as a module, choose M here: the module will be called newtonkbd. +config KEYBOARD_NOMADIK + tristate "ST-Ericsson Nomadik SKE keyboard" + depends on PLAT_NOMADIK + help + Say Y here if you want to use a keypad provided on the SKE controller + used on the Ux500 and Nomadik platforms + + To compile this driver as a module, choose M here: the + module will be called nmk-ske-keypad. + config KEYBOARD_OPENCORES tristate "OpenCores Keyboard Controller" help @@ -424,6 +434,15 @@ config KEYBOARD_OMAP To compile this driver as a module, choose M here: the module will be called omap-keypad. +config KEYBOARD_OMAP4 + tristate "TI OMAP4 keypad support" + depends on ARCH_OMAP4 + help + Say Y here if you want to use the OMAP4 keypad. + + To compile this driver as a module, choose M here: the + module will be called omap4-keypad. + config KEYBOARD_TWL4030 tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" depends on TWL4030_CORE diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 504b591be0cd..c13809c5c3a7 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -28,7 +28,9 @@ obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o +obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o +obj-$(CONFIG_KEYBOARD_OMAP4) += omap4-keypad.o obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index d6918cb966c0..b92d1cd5cba1 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -660,7 +660,7 @@ static const struct dev_pm_ops adp5588_dev_pm_ops = { #endif static const struct i2c_device_id adp5588_id[] = { - { KBUILD_MODNAME, 0 }, + { "adp5588-keys", 0 }, { "adp5587-keys", 0 }, { } }; diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c index 19fa94af207a..fed31e0947a1 100644 --- a/drivers/input/keyboard/hil_kbd.c +++ b/drivers/input/keyboard/hil_kbd.c @@ -570,6 +570,8 @@ static struct serio_device_id hil_dev_ids[] = { { 0 } }; +MODULE_DEVICE_TABLE(serio, hil_dev_ids); + static struct serio_driver hil_serio_drv = { .driver = { .name = "hil_dev", diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c new file mode 100644 index 000000000000..6e0f23091360 --- /dev/null +++ b/drivers/input/keyboard/nomadik-ske-keypad.c @@ -0,0 +1,408 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson + * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson + * + * License terms:GNU General Public License (GPL) version 2 + * + * Keypad controller driver for the SKE (Scroll Key Encoder) module used in + * the Nomadik 8815 and Ux500 platforms. + */ + +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/clk.h> + +#include <plat/ske.h> + +/* SKE_CR bits */ +#define SKE_KPMLT (0x1 << 6) +#define SKE_KPCN (0x7 << 3) +#define SKE_KPASEN (0x1 << 2) +#define SKE_KPASON (0x1 << 7) + +/* SKE_IMSC bits */ +#define SKE_KPIMA (0x1 << 2) + +/* SKE_ICR bits */ +#define SKE_KPICS (0x1 << 3) +#define SKE_KPICA (0x1 << 2) + +/* SKE_RIS bits */ +#define SKE_KPRISA (0x1 << 2) + +#define SKE_KEYPAD_ROW_SHIFT 3 +#define SKE_KPD_KEYMAP_SIZE (8 * 8) + +/* keypad auto scan registers */ +#define SKE_ASR0 0x20 +#define SKE_ASR1 0x24 +#define SKE_ASR2 0x28 +#define SKE_ASR3 0x2C + +#define SKE_NUM_ASRX_REGISTERS (4) + +/** + * struct ske_keypad - data structure used by keypad driver + * @irq: irq no + * @reg_base: ske regsiters base address + * @input: pointer to input device object + * @board: keypad platform device + * @keymap: matrix scan code table for keycodes + * @clk: clock structure pointer + */ +struct ske_keypad { + int irq; + void __iomem *reg_base; + struct input_dev *input; + const struct ske_keypad_platform_data *board; + unsigned short keymap[SKE_KPD_KEYMAP_SIZE]; + struct clk *clk; + spinlock_t ske_keypad_lock; +}; + +static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr, + u8 mask, u8 data) +{ + u32 ret; + + spin_lock(&keypad->ske_keypad_lock); + + ret = readl(keypad->reg_base + addr); + ret &= ~mask; + ret |= data; + writel(ret, keypad->reg_base + addr); + + spin_unlock(&keypad->ske_keypad_lock); +} + +/* + * ske_keypad_chip_init: init keypad controller configuration + * + * Enable Multi key press detection, auto scan mode + */ +static int __devinit ske_keypad_chip_init(struct ske_keypad *keypad) +{ + u32 value; + int timeout = 50; + + /* check SKE_RIS to be 0 */ + while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--) + cpu_relax(); + + if (!timeout) + return -EINVAL; + + /* + * set debounce value + * keypad dbounce is configured in DBCR[15:8] + * dbounce value in steps of 32/32.768 ms + */ + spin_lock(&keypad->ske_keypad_lock); + value = readl(keypad->reg_base + SKE_DBCR); + value = value & 0xff; + value |= ((keypad->board->debounce_ms * 32000)/32768) << 8; + writel(value, keypad->reg_base + SKE_DBCR); + spin_unlock(&keypad->ske_keypad_lock); + + /* enable multi key detection */ + ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPMLT); + + /* + * set up the number of columns + * KPCN[5:3] defines no. of keypad columns to be auto scanned + */ + value = (keypad->board->kcol - 1) << 3; + ske_keypad_set_bits(keypad, SKE_CR, SKE_KPCN, value); + + /* clear keypad interrupt for auto(and pending SW) scans */ + ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA | SKE_KPICS); + + /* un-mask keypad interrupts */ + ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); + + /* enable automatic scan */ + ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPASEN); + + return 0; +} + +static void ske_keypad_read_data(struct ske_keypad *keypad) +{ + struct input_dev *input = keypad->input; + u16 status; + int col = 0, row = 0, code; + int ske_asr, ske_ris, key_pressed, i; + + /* + * Read the auto scan registers + * + * Each SKE_ASRx (x=0 to x=3) contains two row values. + * lower byte contains row value for column 2*x, + * upper byte contains row value for column 2*x + 1 + */ + for (i = 0; i < SKE_NUM_ASRX_REGISTERS; i++) { + ske_asr = readl(keypad->reg_base + SKE_ASR0 + (4 * i)); + if (!ske_asr) + continue; + + /* now that ASRx is zero, find out the column x and row y*/ + if (ske_asr & 0xff) { + col = i * 2; + status = ske_asr & 0xff; + } else { + col = (i * 2) + 1; + status = (ske_asr & 0xff00) >> 8; + } + + /* find out the row */ + row = __ffs(status); + + code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT); + ske_ris = readl(keypad->reg_base + SKE_RIS); + key_pressed = ske_ris & SKE_KPRISA; + + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, keypad->keymap[code], key_pressed); + input_sync(input); + } +} + +static irqreturn_t ske_keypad_irq(int irq, void *dev_id) +{ + struct ske_keypad *keypad = dev_id; + int retries = 20; + + /* disable auto scan interrupt; mask the interrupt generated */ + ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0); + ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA); + + while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --retries) + msleep(5); + + if (retries) { + /* SKEx registers are stable and can be read */ + ske_keypad_read_data(keypad); + } + + /* enable auto scan interrupts */ + ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); + + return IRQ_HANDLED; +} + +static int __devinit ske_keypad_probe(struct platform_device *pdev) +{ + const struct ske_keypad_platform_data *plat = pdev->dev.platform_data; + struct ske_keypad *keypad; + struct input_dev *input; + struct resource *res; + int irq; + int error; + + if (!plat) { + dev_err(&pdev->dev, "invalid keypad platform data\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get keypad irq\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "missing platform resources\n"); + return -EINVAL; + } + + keypad = kzalloc(sizeof(struct ske_keypad), GFP_KERNEL); + input = input_allocate_device(); + if (!keypad || !input) { + dev_err(&pdev->dev, "failed to allocate keypad memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + keypad->irq = irq; + keypad->board = plat; + keypad->input = input; + spin_lock_init(&keypad->ske_keypad_lock); + + if (!request_mem_region(res->start, resource_size(res), pdev->name)) { + dev_err(&pdev->dev, "failed to request I/O memory\n"); + error = -EBUSY; + goto err_free_mem; + } + + keypad->reg_base = ioremap(res->start, resource_size(res)); + if (!keypad->reg_base) { + dev_err(&pdev->dev, "failed to remap I/O memory\n"); + error = -ENXIO; + goto err_free_mem_region; + } + + keypad->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(keypad->clk)) { + dev_err(&pdev->dev, "failed to get clk\n"); + error = PTR_ERR(keypad->clk); + goto err_iounmap; + } + + input->id.bustype = BUS_HOST; + input->name = "ux500-ske-keypad"; + input->dev.parent = &pdev->dev; + + input->keycode = keypad->keymap; + input->keycodesize = sizeof(keypad->keymap[0]); + input->keycodemax = ARRAY_SIZE(keypad->keymap); + + input_set_capability(input, EV_MSC, MSC_SCAN); + + __set_bit(EV_KEY, input->evbit); + if (!plat->no_autorepeat) + __set_bit(EV_REP, input->evbit); + + matrix_keypad_build_keymap(plat->keymap_data, SKE_KEYPAD_ROW_SHIFT, + input->keycode, input->keybit); + + clk_enable(keypad->clk); + + /* go through board initialization helpers */ + if (keypad->board->init) + keypad->board->init(); + + error = ske_keypad_chip_init(keypad); + if (error) { + dev_err(&pdev->dev, "unable to init keypad hardware\n"); + goto err_clk_disable; + } + + error = request_threaded_irq(keypad->irq, NULL, ske_keypad_irq, + IRQF_ONESHOT, "ske-keypad", keypad); + if (error) { + dev_err(&pdev->dev, "allocate irq %d failed\n", keypad->irq); + goto err_clk_disable; + } + + error = input_register_device(input); + if (error) { + dev_err(&pdev->dev, + "unable to register input device: %d\n", error); + goto err_free_irq; + } + + if (plat->wakeup_enable) + device_init_wakeup(&pdev->dev, true); + + platform_set_drvdata(pdev, keypad); + + return 0; + +err_free_irq: + free_irq(keypad->irq, keypad); +err_clk_disable: + clk_disable(keypad->clk); + clk_put(keypad->clk); +err_iounmap: + iounmap(keypad->reg_base); +err_free_mem_region: + release_mem_region(res->start, resource_size(res)); +err_free_mem: + input_free_device(input); + kfree(keypad); + return error; +} + +static int __devexit ske_keypad_remove(struct platform_device *pdev) +{ + struct ske_keypad *keypad = platform_get_drvdata(pdev); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + free_irq(keypad->irq, keypad); + + input_unregister_device(keypad->input); + + clk_disable(keypad->clk); + clk_put(keypad->clk); + + if (keypad->board->exit) + keypad->board->exit(); + + iounmap(keypad->reg_base); + release_mem_region(res->start, resource_size(res)); + kfree(keypad); + + return 0; +} + +#ifdef CONFIG_PM +static int ske_keypad_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ske_keypad *keypad = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + if (device_may_wakeup(dev)) + enable_irq_wake(irq); + else + ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0); + + return 0; +} + +static int ske_keypad_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ske_keypad *keypad = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + if (device_may_wakeup(dev)) + disable_irq_wake(irq); + else + ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); + + return 0; +} + +static const struct dev_pm_ops ske_keypad_dev_pm_ops = { + .suspend = ske_keypad_suspend, + .resume = ske_keypad_resume, +}; +#endif + +struct platform_driver ske_keypad_driver = { + .driver = { + .name = "nmk-ske-keypad", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &ske_keypad_dev_pm_ops, +#endif + }, + .probe = ske_keypad_probe, + .remove = __devexit_p(ske_keypad_remove), +}; + +static int __init ske_keypad_init(void) +{ + return platform_driver_probe(&ske_keypad_driver, ske_keypad_probe); +} +module_init(ske_keypad_init); + +static void __exit ske_keypad_exit(void) +{ + platform_driver_unregister(&ske_keypad_driver); +} +module_exit(ske_keypad_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Naveen Kumar <naveen.gaddipati@stericsson.com> / Sundar Iyer <sundar.iyer@stericsson.com>"); +MODULE_DESCRIPTION("Nomadik Scroll-Key-Encoder Keypad Driver"); +MODULE_ALIAS("platform:nomadik-ske-keypad"); diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c new file mode 100644 index 000000000000..45bd0977d006 --- /dev/null +++ b/drivers/input/keyboard/omap4-keypad.c @@ -0,0 +1,318 @@ +/* + * OMAP4 Keypad Driver + * + * Copyright (C) 2010 Texas Instruments + * + * Author: Abraham Arce <x0066660@ti.com> + * Initial Code: Syed Rafiuddin <rafiuddin.syed@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/input.h> +#include <linux/slab.h> + +#include <plat/omap4-keypad.h> + +/* OMAP4 registers */ +#define OMAP4_KBD_REVISION 0x00 +#define OMAP4_KBD_SYSCONFIG 0x10 +#define OMAP4_KBD_SYSSTATUS 0x14 +#define OMAP4_KBD_IRQSTATUS 0x18 +#define OMAP4_KBD_IRQENABLE 0x1C +#define OMAP4_KBD_WAKEUPENABLE 0x20 +#define OMAP4_KBD_PENDING 0x24 +#define OMAP4_KBD_CTRL 0x28 +#define OMAP4_KBD_DEBOUNCINGTIME 0x2C +#define OMAP4_KBD_LONGKEYTIME 0x30 +#define OMAP4_KBD_TIMEOUT 0x34 +#define OMAP4_KBD_STATEMACHINE 0x38 +#define OMAP4_KBD_ROWINPUTS 0x3C +#define OMAP4_KBD_COLUMNOUTPUTS 0x40 +#define OMAP4_KBD_FULLCODE31_0 0x44 +#define OMAP4_KBD_FULLCODE63_32 0x48 + +/* OMAP4 bit definitions */ +#define OMAP4_DEF_IRQENABLE_EVENTEN (1 << 0) +#define OMAP4_DEF_IRQENABLE_LONGKEY (1 << 1) +#define OMAP4_DEF_IRQENABLE_TIMEOUTEN (1 << 2) +#define OMAP4_DEF_WUP_EVENT_ENA (1 << 0) +#define OMAP4_DEF_WUP_LONG_KEY_ENA (1 << 1) +#define OMAP4_DEF_CTRL_NOSOFTMODE (1 << 1) +#define OMAP4_DEF_CTRLPTVVALUE (1 << 2) +#define OMAP4_DEF_CTRLPTV (1 << 1) + +/* OMAP4 values */ +#define OMAP4_VAL_IRQDISABLE 0x00 +#define OMAP4_VAL_DEBOUNCINGTIME 0x07 +#define OMAP4_VAL_FUNCTIONALCFG 0x1E + +#define OMAP4_MASK_IRQSTATUSDISABLE 0xFFFF + +struct omap4_keypad { + struct input_dev *input; + + void __iomem *base; + int irq; + + unsigned int rows; + unsigned int cols; + unsigned int row_shift; + unsigned char key_state[8]; + unsigned short keymap[]; +}; + +static void __devinit omap4_keypad_config(struct omap4_keypad *keypad_data) +{ + __raw_writel(OMAP4_VAL_FUNCTIONALCFG, + keypad_data->base + OMAP4_KBD_CTRL); + __raw_writel(OMAP4_VAL_DEBOUNCINGTIME, + keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME); + __raw_writel(OMAP4_VAL_IRQDISABLE, + keypad_data->base + OMAP4_KBD_IRQSTATUS); + __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, + keypad_data->base + OMAP4_KBD_IRQENABLE); + __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA, + keypad_data->base + OMAP4_KBD_WAKEUPENABLE); +} + +/* Interrupt handler */ +static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) +{ + struct omap4_keypad *keypad_data = dev_id; + struct input_dev *input_dev = keypad_data->input; + unsigned char key_state[ARRAY_SIZE(keypad_data->key_state)]; + unsigned int col, row, code, changed; + u32 *new_state = (u32 *) key_state; + + /* Disable interrupts */ + __raw_writel(OMAP4_VAL_IRQDISABLE, + keypad_data->base + OMAP4_KBD_IRQENABLE); + + *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0); + *(new_state + 1) = __raw_readl(keypad_data->base + + OMAP4_KBD_FULLCODE63_32); + + for (row = 0; row < keypad_data->rows; row++) { + changed = key_state[row] ^ keypad_data->key_state[row]; + if (!changed) + continue; + + for (col = 0; col < keypad_data->cols; col++) { + if (changed & (1 << col)) { + code = MATRIX_SCAN_CODE(row, col, + keypad_data->row_shift); + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, + keypad_data->keymap[code], + key_state[row] & (1 << col)); + } + } + } + + input_sync(input_dev); + + memcpy(keypad_data->key_state, key_state, + sizeof(keypad_data->key_state)); + + /* clear pending interrupts */ + __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS), + keypad_data->base + OMAP4_KBD_IRQSTATUS); + + /* enable interrupts */ + __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, + keypad_data->base + OMAP4_KBD_IRQENABLE); + + return IRQ_HANDLED; +} + +static int __devinit omap4_keypad_probe(struct platform_device *pdev) +{ + const struct omap4_keypad_platform_data *pdata; + struct omap4_keypad *keypad_data; + struct input_dev *input_dev; + struct resource *res; + resource_size_t size; + unsigned int row_shift, max_keys; + int irq; + int error; + + /* platform data */ + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data defined\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no base address specified\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (!irq) { + dev_err(&pdev->dev, "no keyboard irq assigned\n"); + return -EINVAL; + } + + if (!pdata->keymap_data) { + dev_err(&pdev->dev, "no keymap data defined\n"); + return -EINVAL; + } + + row_shift = get_count_order(pdata->cols); + max_keys = pdata->rows << row_shift; + + keypad_data = kzalloc(sizeof(struct omap4_keypad) + + max_keys * sizeof(keypad_data->keymap[0]), + GFP_KERNEL); + if (!keypad_data) { + dev_err(&pdev->dev, "keypad_data memory allocation failed\n"); + return -ENOMEM; + } + + size = resource_size(res); + + res = request_mem_region(res->start, size, pdev->name); + if (!res) { + dev_err(&pdev->dev, "can't request mem region\n"); + error = -EBUSY; + goto err_free_keypad; + } + + keypad_data->base = ioremap(res->start, resource_size(res)); + if (!keypad_data->base) { + dev_err(&pdev->dev, "can't ioremap mem resource\n"); + error = -ENOMEM; + goto err_release_mem; + } + + keypad_data->irq = irq; + keypad_data->row_shift = row_shift; + keypad_data->rows = pdata->rows; + keypad_data->cols = pdata->cols; + + /* input device allocation */ + keypad_data->input = input_dev = input_allocate_device(); + if (!input_dev) { + error = -ENOMEM; + goto err_unmap; + } + + input_dev->name = pdev->name; + input_dev->dev.parent = &pdev->dev; + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0001; + + input_dev->keycode = keypad_data->keymap; + input_dev->keycodesize = sizeof(keypad_data->keymap[0]); + input_dev->keycodemax = max_keys; + + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(EV_REP, input_dev->evbit); + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + + input_set_drvdata(input_dev, keypad_data); + + matrix_keypad_build_keymap(pdata->keymap_data, row_shift, + input_dev->keycode, input_dev->keybit); + + omap4_keypad_config(keypad_data); + + error = request_irq(keypad_data->irq, omap4_keypad_interrupt, + IRQF_TRIGGER_RISING, + "omap4-keypad", keypad_data); + if (error) { + dev_err(&pdev->dev, "failed to register interrupt\n"); + goto err_free_input; + } + + error = input_register_device(keypad_data->input); + if (error < 0) { + dev_err(&pdev->dev, "failed to register input device\n"); + goto err_free_irq; + } + + + platform_set_drvdata(pdev, keypad_data); + return 0; + +err_free_irq: + free_irq(keypad_data->irq, keypad_data); +err_free_input: + input_free_device(input_dev); +err_unmap: + iounmap(keypad_data->base); +err_release_mem: + release_mem_region(res->start, size); +err_free_keypad: + kfree(keypad_data); + return error; +} + +static int __devexit omap4_keypad_remove(struct platform_device *pdev) +{ + struct omap4_keypad *keypad_data = platform_get_drvdata(pdev); + struct resource *res; + + free_irq(keypad_data->irq, keypad_data); + input_unregister_device(keypad_data->input); + + iounmap(keypad_data->base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + + kfree(keypad_data); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver omap4_keypad_driver = { + .probe = omap4_keypad_probe, + .remove = __devexit_p(omap4_keypad_remove), + .driver = { + .name = "omap4-keypad", + .owner = THIS_MODULE, + }, +}; + +static int __init omap4_keypad_init(void) +{ + return platform_driver_register(&omap4_keypad_driver); +} +module_init(omap4_keypad_init); + +static void __exit omap4_keypad_exit(void) +{ + platform_driver_unregister(&omap4_keypad_driver); +} +module_exit(omap4_keypad_exit); + +MODULE_AUTHOR("Texas Instruments"); +MODULE_DESCRIPTION("OMAP4 Keypad Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:omap4-keypad"); diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c index fb16b5e5ea13..09bef79d9da1 100644 --- a/drivers/input/keyboard/twl4030_keypad.c +++ b/drivers/input/keyboard/twl4030_keypad.c @@ -406,23 +406,22 @@ static int __devinit twl4030_kp_probe(struct platform_device *pdev) if (error) { dev_info(kp->dbg_dev, "request_irq failed for irq no=%d\n", kp->irq); - goto err3; + goto err2; } /* Enable KP and TO interrupts now. */ reg = (u8) ~(KEYP_IMR1_KP | KEYP_IMR1_TO); if (twl4030_kpwrite_u8(kp, reg, KEYP_IMR1)) { error = -EIO; - goto err4; + goto err3; } platform_set_drvdata(pdev, kp); return 0; -err4: +err3: /* mask all events - we don't care about the result */ (void) twl4030_kpwrite_u8(kp, 0xff, KEYP_IMR1); -err3: free_irq(kp->irq, NULL); err2: input_unregister_device(input); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index b49e23379723..b99b8cbde02f 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -22,6 +22,16 @@ config INPUT_88PM860X_ONKEY To compile this driver as a module, choose M here: the module will be called 88pm860x_onkey. +config INPUT_AB8500_PONKEY + tristate "AB8500 Pon (PowerOn) Key" + depends on AB8500_CORE + help + Say Y here to use the PowerOn Key for ST-Ericsson's AB8500 + Mix-Sig PMIC. + + To compile this driver as a module, choose M here: the module + will be called ab8500-ponkey. + config INPUT_AD714X tristate "Analog Devices AD714x Capacitance Touch Sensor" help diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 19ccca78fa76..1fe1f6c8b737 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -5,6 +5,7 @@ # Each configuration option enables a list of files. obj-$(CONFIG_INPUT_88PM860X_ONKEY) += 88pm860x_onkey.o +obj-$(CONFIG_INPUT_AB8500_PONKEY) += ab8500-ponkey.o obj-$(CONFIG_INPUT_AD714X) += ad714x.o obj-$(CONFIG_INPUT_AD714X_I2C) += ad714x-i2c.o obj-$(CONFIG_INPUT_AD714X_SPI) += ad714x-spi.o diff --git a/drivers/input/misc/ab8500-ponkey.c b/drivers/input/misc/ab8500-ponkey.c new file mode 100644 index 000000000000..3d3288a78fdc --- /dev/null +++ b/drivers/input/misc/ab8500-ponkey.c @@ -0,0 +1,157 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson + * + * AB8500 Power-On Key handler + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/mfd/ab8500.h> +#include <linux/slab.h> + +/** + * struct ab8500_ponkey - ab8500 ponkey information + * @input_dev: pointer to input device + * @ab8500: ab8500 parent + * @irq_dbf: irq number for falling transition + * @irq_dbr: irq number for rising transition + */ +struct ab8500_ponkey { + struct input_dev *idev; + struct ab8500 *ab8500; + int irq_dbf; + int irq_dbr; +}; + +/* AB8500 gives us an interrupt when ONKEY is held */ +static irqreturn_t ab8500_ponkey_handler(int irq, void *data) +{ + struct ab8500_ponkey *ponkey = data; + + if (irq == ponkey->irq_dbf) + input_report_key(ponkey->idev, KEY_POWER, true); + else if (irq == ponkey->irq_dbr) + input_report_key(ponkey->idev, KEY_POWER, false); + + input_sync(ponkey->idev); + + return IRQ_HANDLED; +} + +static int __devinit ab8500_ponkey_probe(struct platform_device *pdev) +{ + struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); + struct ab8500_ponkey *ponkey; + struct input_dev *input; + int irq_dbf, irq_dbr; + int error; + + irq_dbf = platform_get_irq_byname(pdev, "ONKEY_DBF"); + if (irq_dbf < 0) { + dev_err(&pdev->dev, "No IRQ for ONKEY_DBF, error=%d\n", irq_dbf); + return irq_dbf; + } + + irq_dbr = platform_get_irq_byname(pdev, "ONKEY_DBR"); + if (irq_dbr < 0) { + dev_err(&pdev->dev, "No IRQ for ONKEY_DBR, error=%d\n", irq_dbr); + return irq_dbr; + } + + ponkey = kzalloc(sizeof(struct ab8500_ponkey), GFP_KERNEL); + input = input_allocate_device(); + if (!ponkey || !input) { + error = -ENOMEM; + goto err_free_mem; + } + + ponkey->idev = input; + ponkey->ab8500 = ab8500; + ponkey->irq_dbf = irq_dbf; + ponkey->irq_dbr = irq_dbr; + + input->name = "AB8500 POn(PowerOn) Key"; + input->dev.parent = &pdev->dev; + + input_set_capability(input, EV_KEY, KEY_POWER); + + error = request_any_context_irq(ponkey->irq_dbf, ab8500_ponkey_handler, + 0, "ab8500-ponkey-dbf", ponkey); + if (error < 0) { + dev_err(ab8500->dev, "Failed to request dbf IRQ#%d: %d\n", + ponkey->irq_dbf, error); + goto err_free_mem; + } + + error = request_any_context_irq(ponkey->irq_dbr, ab8500_ponkey_handler, + 0, "ab8500-ponkey-dbr", ponkey); + if (error < 0) { + dev_err(ab8500->dev, "Failed to request dbr IRQ#%d: %d\n", + ponkey->irq_dbr, error); + goto err_free_dbf_irq; + } + + error = input_register_device(ponkey->idev); + if (error) { + dev_err(ab8500->dev, "Can't register input device: %d\n", error); + goto err_free_dbr_irq; + } + + platform_set_drvdata(pdev, ponkey); + return 0; + +err_free_dbr_irq: + free_irq(ponkey->irq_dbr, ponkey); +err_free_dbf_irq: + free_irq(ponkey->irq_dbf, ponkey); +err_free_mem: + input_free_device(input); + kfree(ponkey); + + return error; +} + +static int __devexit ab8500_ponkey_remove(struct platform_device *pdev) +{ + struct ab8500_ponkey *ponkey = platform_get_drvdata(pdev); + + free_irq(ponkey->irq_dbf, ponkey); + free_irq(ponkey->irq_dbr, ponkey); + input_unregister_device(ponkey->idev); + kfree(ponkey); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver ab8500_ponkey_driver = { + .driver = { + .name = "ab8500-poweron-key", + .owner = THIS_MODULE, + }, + .probe = ab8500_ponkey_probe, + .remove = __devexit_p(ab8500_ponkey_remove), +}; + +static int __init ab8500_ponkey_init(void) +{ + return platform_driver_register(&ab8500_ponkey_driver); +} +module_init(ab8500_ponkey_init); + +static void __exit ab8500_ponkey_exit(void) +{ + platform_driver_unregister(&ab8500_ponkey_driver); +} +module_exit(ab8500_ponkey_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>"); +MODULE_DESCRIPTION("ST-Ericsson AB8500 Power-ON(Pon) Key driver"); diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c index 23257652b8e8..0b0e9be63542 100644 --- a/drivers/input/misc/ati_remote2.c +++ b/drivers/input/misc/ati_remote2.c @@ -483,51 +483,88 @@ static void ati_remote2_complete_key(struct urb *urb) } static int ati_remote2_getkeycode(struct input_dev *idev, - unsigned int scancode, unsigned int *keycode) + struct input_keymap_entry *ke) { struct ati_remote2 *ar2 = input_get_drvdata(idev); unsigned int mode; - int index; + int offset; + unsigned int index; + unsigned int scancode; + + if (ke->flags & INPUT_KEYMAP_BY_INDEX) { + index = ke->index; + if (index >= ATI_REMOTE2_MODES * + ARRAY_SIZE(ati_remote2_key_table)) + return -EINVAL; + + mode = ke->index / ARRAY_SIZE(ati_remote2_key_table); + offset = ke->index % ARRAY_SIZE(ati_remote2_key_table); + scancode = (mode << 8) + ati_remote2_key_table[offset].hw_code; + } else { + if (input_scancode_to_scalar(ke, &scancode)) + return -EINVAL; + + mode = scancode >> 8; + if (mode > ATI_REMOTE2_PC) + return -EINVAL; + + offset = ati_remote2_lookup(scancode & 0xff); + if (offset < 0) + return -EINVAL; + + index = mode * ARRAY_SIZE(ati_remote2_key_table) + offset; + } - mode = scancode >> 8; - if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask)) - return -EINVAL; + ke->keycode = ar2->keycode[mode][offset]; + ke->len = sizeof(scancode); + memcpy(&ke->scancode, &scancode, sizeof(scancode)); + ke->index = index; - index = ati_remote2_lookup(scancode & 0xFF); - if (index < 0) - return -EINVAL; - - *keycode = ar2->keycode[mode][index]; return 0; } static int ati_remote2_setkeycode(struct input_dev *idev, - unsigned int scancode, unsigned int keycode) + const struct input_keymap_entry *ke, + unsigned int *old_keycode) { struct ati_remote2 *ar2 = input_get_drvdata(idev); - unsigned int mode, old_keycode; - int index; - - mode = scancode >> 8; - if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask)) - return -EINVAL; - - index = ati_remote2_lookup(scancode & 0xFF); - if (index < 0) - return -EINVAL; + unsigned int mode; + int offset; + unsigned int index; + unsigned int scancode; + + if (ke->flags & INPUT_KEYMAP_BY_INDEX) { + if (ke->index >= ATI_REMOTE2_MODES * + ARRAY_SIZE(ati_remote2_key_table)) + return -EINVAL; + + mode = ke->index / ARRAY_SIZE(ati_remote2_key_table); + offset = ke->index % ARRAY_SIZE(ati_remote2_key_table); + } else { + if (input_scancode_to_scalar(ke, &scancode)) + return -EINVAL; + + mode = scancode >> 8; + if (mode > ATI_REMOTE2_PC) + return -EINVAL; + + offset = ati_remote2_lookup(scancode & 0xff); + if (offset < 0) + return -EINVAL; + } - old_keycode = ar2->keycode[mode][index]; - ar2->keycode[mode][index] = keycode; - __set_bit(keycode, idev->keybit); + *old_keycode = ar2->keycode[mode][offset]; + ar2->keycode[mode][offset] = ke->keycode; + __set_bit(ke->keycode, idev->keybit); for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) { for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) { - if (ar2->keycode[mode][index] == old_keycode) + if (ar2->keycode[mode][index] == *old_keycode) return 0; } } - __clear_bit(old_keycode, idev->keybit); + __clear_bit(*old_keycode, idev->keybit); return 0; } @@ -575,8 +612,8 @@ static int ati_remote2_input_init(struct ati_remote2 *ar2) idev->open = ati_remote2_open; idev->close = ati_remote2_close; - idev->getkeycode = ati_remote2_getkeycode; - idev->setkeycode = ati_remote2_setkeycode; + idev->getkeycode_new = ati_remote2_getkeycode; + idev->setkeycode_new = ati_remote2_setkeycode; idev->name = ar2->name; idev->phys = ar2->phys; diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c index bf170f6b4422..f45947190e4f 100644 --- a/drivers/input/misc/powermate.c +++ b/drivers/input/misc/powermate.c @@ -280,7 +280,7 @@ static int powermate_alloc_buffers(struct usb_device *udev, struct powermate_dev pm->configcr = kmalloc(sizeof(*(pm->configcr)), GFP_KERNEL); if (!pm->configcr) - return -1; + return -ENOMEM; return 0; } diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 48311204ba51..04d9bf320a4f 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -699,7 +699,7 @@ int elantech_init(struct psmouse *psmouse) psmouse->private = etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL); if (!etd) - return -1; + return -ENOMEM; etd->parity[0] = 1; for (i = 1; i < 256; i++) diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 73a7af2542a8..cd9d0c97e429 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -1584,10 +1584,10 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co if (!new_dev) return -ENOMEM; - while (serio->child) { + while (!list_empty(&serio->children)) { if (++retry > 3) { printk(KERN_WARNING - "psmouse: failed to destroy child port, " + "psmouse: failed to destroy children ports, " "protocol change aborted.\n"); input_free_device(new_dev); return -EIO; diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 96b70a43515f..2e300a460556 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -294,7 +294,29 @@ static int synaptics_pt_write(struct serio *serio, unsigned char c) return 0; } -static inline int synaptics_is_pt_packet(unsigned char *buf) +static int synaptics_pt_start(struct serio *serio) +{ + struct psmouse *parent = serio_get_drvdata(serio->parent); + struct synaptics_data *priv = parent->private; + + serio_pause_rx(parent->ps2dev.serio); + priv->pt_port = serio; + serio_continue_rx(parent->ps2dev.serio); + + return 0; +} + +static void synaptics_pt_stop(struct serio *serio) +{ + struct psmouse *parent = serio_get_drvdata(serio->parent); + struct synaptics_data *priv = parent->private; + + serio_pause_rx(parent->ps2dev.serio); + priv->pt_port = NULL; + serio_continue_rx(parent->ps2dev.serio); +} + +static int synaptics_is_pt_packet(unsigned char *buf) { return (buf[0] & 0xFC) == 0x84 && (buf[3] & 0xCC) == 0xC4; } @@ -315,9 +337,8 @@ static void synaptics_pass_pt_packet(struct serio *ptport, unsigned char *packet static void synaptics_pt_activate(struct psmouse *psmouse) { - struct serio *ptport = psmouse->ps2dev.serio->child; - struct psmouse *child = serio_get_drvdata(ptport); struct synaptics_data *priv = psmouse->private; + struct psmouse *child = serio_get_drvdata(priv->pt_port); /* adjust the touchpad to child's choice of protocol */ if (child) { @@ -345,6 +366,8 @@ static void synaptics_pt_create(struct psmouse *psmouse) strlcpy(serio->name, "Synaptics pass-through", sizeof(serio->name)); strlcpy(serio->phys, "synaptics-pt/serio0", sizeof(serio->name)); serio->write = synaptics_pt_write; + serio->start = synaptics_pt_start; + serio->stop = synaptics_pt_stop; serio->parent = psmouse->ps2dev.serio; psmouse->pt_activate = synaptics_pt_activate; @@ -578,9 +601,10 @@ static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse) if (unlikely(priv->pkt_type == SYN_NEWABS)) priv->pkt_type = synaptics_detect_pkt_type(psmouse); - if (SYN_CAP_PASS_THROUGH(priv->capabilities) && synaptics_is_pt_packet(psmouse->packet)) { - if (psmouse->ps2dev.serio->child) - synaptics_pass_pt_packet(psmouse->ps2dev.serio->child, psmouse->packet); + if (SYN_CAP_PASS_THROUGH(priv->capabilities) && + synaptics_is_pt_packet(psmouse->packet)) { + if (priv->pt_port) + synaptics_pass_pt_packet(priv->pt_port, psmouse->packet); } else synaptics_process_packet(psmouse); @@ -731,7 +755,7 @@ int synaptics_init(struct psmouse *psmouse) psmouse->private = priv = kzalloc(sizeof(struct synaptics_data), GFP_KERNEL); if (!priv) - return -1; + return -ENOMEM; psmouse_reset(psmouse); diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index b6aa7d20d8a3..613a3652f98f 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -110,6 +110,8 @@ struct synaptics_data { unsigned char pkt_type; /* packet type - old, new, etc */ unsigned char mode; /* current mode byte */ int scroll; + + struct serio *pt_port; /* Pass-through serio port */ }; void synaptics_module_init(void); diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c index 0643e49ca603..54b2fa892e19 100644 --- a/drivers/input/mouse/trackpoint.c +++ b/drivers/input/mouse/trackpoint.c @@ -303,7 +303,7 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties) psmouse->private = kzalloc(sizeof(struct trackpoint_data), GFP_KERNEL); if (!psmouse->private) - return -1; + return -ENOMEM; psmouse->vendor = "IBM"; psmouse->name = "TrackPoint"; diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 31ec7265aac6..2a00ddf4f23a 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -867,7 +867,7 @@ static struct mousedev *mousedev_create(struct input_dev *dev, spin_lock_init(&mousedev->client_lock); mutex_init(&mousedev->mutex); lockdep_set_subclass(&mousedev->mutex, - minor == MOUSEDEV_MIX ? MOUSEDEV_MIX : 0); + minor == MOUSEDEV_MIX ? SINGLE_DEPTH_NESTING : 0); init_waitqueue_head(&mousedev->wait); if (minor == MOUSEDEV_MIX) diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 3bfe8fafc6ad..6256233d2bfb 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -226,4 +226,13 @@ config SERIO_AMS_DELTA To compile this driver as a module, choose M here; the module will be called ams_delta_serio. +config SERIO_PS2MULT + tristate "TQC PS/2 multiplexer" + help + Say Y here if you have the PS/2 line multiplexer like the one + present on TQC boads. + + To compile this driver as a module, choose M here: the + module will be called ps2mult. + endif diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile index 84c80bf7185e..dbbe37616c92 100644 --- a/drivers/input/serio/Makefile +++ b/drivers/input/serio/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_SERIO_GSCPS2) += gscps2.o obj-$(CONFIG_HP_SDC) += hp_sdc.o obj-$(CONFIG_HIL_MLC) += hp_sdc_mlc.o hil_mlc.o obj-$(CONFIG_SERIO_PCIPS2) += pcips2.o +obj-$(CONFIG_SERIO_PS2MULT) += ps2mult.o obj-$(CONFIG_SERIO_MACEPS2) += maceps2.o obj-$(CONFIG_SERIO_LIBPS2) += libps2.o obj-$(CONFIG_SERIO_RAW) += serio_raw.o diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index f58513160480..18db5a8c7478 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -1063,7 +1063,7 @@ static long i8042_panic_blink(int state) #ifdef CONFIG_X86 static void i8042_dritek_enable(void) { - char param = 0x90; + unsigned char param = 0x90; int error; error = i8042_command(¶m, 0x1059); diff --git a/drivers/input/serio/ps2mult.c b/drivers/input/serio/ps2mult.c new file mode 100644 index 000000000000..6bce22e4e495 --- /dev/null +++ b/drivers/input/serio/ps2mult.c @@ -0,0 +1,318 @@ +/* + * TQC PS/2 Multiplexer driver + * + * Copyright (C) 2010 Dmitry Eremin-Solenikov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/serio.h> + +MODULE_AUTHOR("Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>"); +MODULE_DESCRIPTION("TQC PS/2 Multiplexer driver"); +MODULE_LICENSE("GPL"); + +#define PS2MULT_KB_SELECTOR 0xA0 +#define PS2MULT_MS_SELECTOR 0xA1 +#define PS2MULT_ESCAPE 0x7D +#define PS2MULT_BSYNC 0x7E +#define PS2MULT_SESSION_START 0x55 +#define PS2MULT_SESSION_END 0x56 + +struct ps2mult_port { + struct serio *serio; + unsigned char sel; + bool registered; +}; + +#define PS2MULT_NUM_PORTS 2 +#define PS2MULT_KBD_PORT 0 +#define PS2MULT_MOUSE_PORT 1 + +struct ps2mult { + struct serio *mx_serio; + struct ps2mult_port ports[PS2MULT_NUM_PORTS]; + + spinlock_t lock; + struct ps2mult_port *in_port; + struct ps2mult_port *out_port; + bool escape; +}; + +/* First MUST come PS2MULT_NUM_PORTS selectors */ +static const unsigned char ps2mult_controls[] = { + PS2MULT_KB_SELECTOR, PS2MULT_MS_SELECTOR, + PS2MULT_ESCAPE, PS2MULT_BSYNC, + PS2MULT_SESSION_START, PS2MULT_SESSION_END, +}; + +static const struct serio_device_id ps2mult_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_PS2MULT, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, ps2mult_serio_ids); + +static void ps2mult_select_port(struct ps2mult *psm, struct ps2mult_port *port) +{ + struct serio *mx_serio = psm->mx_serio; + + serio_write(mx_serio, port->sel); + psm->out_port = port; + dev_dbg(&mx_serio->dev, "switched to sel %02x\n", port->sel); +} + +static int ps2mult_serio_write(struct serio *serio, unsigned char data) +{ + struct serio *mx_port = serio->parent; + struct ps2mult *psm = serio_get_drvdata(mx_port); + struct ps2mult_port *port = serio->port_data; + bool need_escape; + unsigned long flags; + + spin_lock_irqsave(&psm->lock, flags); + + if (psm->out_port != port) + ps2mult_select_port(psm, port); + + need_escape = memchr(ps2mult_controls, data, sizeof(ps2mult_controls)); + + dev_dbg(&serio->dev, + "write: %s%02x\n", need_escape ? "ESC " : "", data); + + if (need_escape) + serio_write(mx_port, PS2MULT_ESCAPE); + + serio_write(mx_port, data); + + spin_unlock_irqrestore(&psm->lock, flags); + + return 0; +} + +static int ps2mult_serio_start(struct serio *serio) +{ + struct ps2mult *psm = serio_get_drvdata(serio->parent); + struct ps2mult_port *port = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&psm->lock, flags); + port->registered = true; + spin_unlock_irqrestore(&psm->lock, flags); + + return 0; +} + +static void ps2mult_serio_stop(struct serio *serio) +{ + struct ps2mult *psm = serio_get_drvdata(serio->parent); + struct ps2mult_port *port = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&psm->lock, flags); + port->registered = false; + spin_unlock_irqrestore(&psm->lock, flags); +} + +static int ps2mult_create_port(struct ps2mult *psm, int i) +{ + struct serio *mx_serio = psm->mx_serio; + struct serio *serio; + + serio = kzalloc(sizeof(struct serio), GFP_KERNEL); + if (!serio) + return -ENOMEM; + + strlcpy(serio->name, "TQC PS/2 Multiplexer", sizeof(serio->name)); + snprintf(serio->phys, sizeof(serio->phys), + "%s/port%d", mx_serio->phys, i); + serio->id.type = SERIO_8042; + serio->write = ps2mult_serio_write; + serio->start = ps2mult_serio_start; + serio->stop = ps2mult_serio_stop; + serio->parent = psm->mx_serio; + serio->port_data = &psm->ports[i]; + + psm->ports[i].serio = serio; + + return 0; +} + +static void ps2mult_reset(struct ps2mult *psm) +{ + unsigned long flags; + + spin_lock_irqsave(&psm->lock, flags); + + serio_write(psm->mx_serio, PS2MULT_SESSION_END); + serio_write(psm->mx_serio, PS2MULT_SESSION_START); + + ps2mult_select_port(psm, &psm->ports[PS2MULT_KBD_PORT]); + + spin_unlock_irqrestore(&psm->lock, flags); +} + +static int ps2mult_connect(struct serio *serio, struct serio_driver *drv) +{ + struct ps2mult *psm; + int i; + int error; + + if (!serio->write) + return -EINVAL; + + psm = kzalloc(sizeof(*psm), GFP_KERNEL); + if (!psm) + return -ENOMEM; + + spin_lock_init(&psm->lock); + psm->mx_serio = serio; + + for (i = 0; i < PS2MULT_NUM_PORTS; i++) { + psm->ports[i].sel = ps2mult_controls[i]; + error = ps2mult_create_port(psm, i); + if (error) + goto err_out; + } + + psm->in_port = psm->out_port = &psm->ports[PS2MULT_KBD_PORT]; + + serio_set_drvdata(serio, psm); + error = serio_open(serio, drv); + if (error) + goto err_out; + + ps2mult_reset(psm); + + for (i = 0; i < PS2MULT_NUM_PORTS; i++) { + struct serio *s = psm->ports[i].serio; + + dev_info(&serio->dev, "%s port at %s\n", s->name, serio->phys); + serio_register_port(s); + } + + return 0; + +err_out: + while (--i >= 0) + kfree(psm->ports[i].serio); + kfree(serio); + return error; +} + +static void ps2mult_disconnect(struct serio *serio) +{ + struct ps2mult *psm = serio_get_drvdata(serio); + + /* Note that serio core already take care of children ports */ + serio_write(serio, PS2MULT_SESSION_END); + serio_close(serio); + kfree(psm); + + serio_set_drvdata(serio, NULL); +} + +static int ps2mult_reconnect(struct serio *serio) +{ + struct ps2mult *psm = serio_get_drvdata(serio); + + ps2mult_reset(psm); + + return 0; +} + +static irqreturn_t ps2mult_interrupt(struct serio *serio, + unsigned char data, unsigned int dfl) +{ + struct ps2mult *psm = serio_get_drvdata(serio); + struct ps2mult_port *in_port; + unsigned long flags; + + dev_dbg(&serio->dev, "Received %02x flags %02x\n", data, dfl); + + spin_lock_irqsave(&psm->lock, flags); + + if (psm->escape) { + psm->escape = false; + in_port = psm->in_port; + if (in_port->registered) + serio_interrupt(in_port->serio, data, dfl); + goto out; + } + + switch (data) { + case PS2MULT_ESCAPE: + dev_dbg(&serio->dev, "ESCAPE\n"); + psm->escape = true; + break; + + case PS2MULT_BSYNC: + dev_dbg(&serio->dev, "BSYNC\n"); + psm->in_port = psm->out_port; + break; + + case PS2MULT_SESSION_START: + dev_dbg(&serio->dev, "SS\n"); + break; + + case PS2MULT_SESSION_END: + dev_dbg(&serio->dev, "SE\n"); + break; + + case PS2MULT_KB_SELECTOR: + dev_dbg(&serio->dev, "KB\n"); + psm->in_port = &psm->ports[PS2MULT_KBD_PORT]; + break; + + case PS2MULT_MS_SELECTOR: + dev_dbg(&serio->dev, "MS\n"); + psm->in_port = &psm->ports[PS2MULT_MOUSE_PORT]; + break; + + default: + in_port = psm->in_port; + if (in_port->registered) + serio_interrupt(in_port->serio, data, dfl); + break; + } + + out: + spin_unlock_irqrestore(&psm->lock, flags); + return IRQ_HANDLED; +} + +static struct serio_driver ps2mult_drv = { + .driver = { + .name = "ps2mult", + }, + .description = "TQC PS/2 Multiplexer driver", + .id_table = ps2mult_serio_ids, + .interrupt = ps2mult_interrupt, + .connect = ps2mult_connect, + .disconnect = ps2mult_disconnect, + .reconnect = ps2mult_reconnect, +}; + +static int __init ps2mult_init(void) +{ + return serio_register_driver(&ps2mult_drv); +} + +static void __exit ps2mult_exit(void) +{ + serio_unregister_driver(&ps2mult_drv); +} + +module_init(ps2mult_init); +module_exit(ps2mult_exit); diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c index c3b626e9eae7..405bf214527c 100644 --- a/drivers/input/serio/serio.c +++ b/drivers/input/serio/serio.c @@ -37,7 +37,6 @@ #include <linux/slab.h> #include <linux/kthread.h> #include <linux/mutex.h> -#include <linux/freezer.h> MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); MODULE_DESCRIPTION("Serio abstraction core"); @@ -56,7 +55,7 @@ static struct bus_type serio_bus; static void serio_add_port(struct serio *serio); static int serio_reconnect_port(struct serio *serio); static void serio_disconnect_port(struct serio *serio); -static void serio_reconnect_chain(struct serio *serio); +static void serio_reconnect_subtree(struct serio *serio); static void serio_attach_driver(struct serio_driver *drv); static int serio_connect_driver(struct serio *serio, struct serio_driver *drv) @@ -152,7 +151,7 @@ static void serio_find_driver(struct serio *serio) enum serio_event_type { SERIO_RESCAN_PORT, SERIO_RECONNECT_PORT, - SERIO_RECONNECT_CHAIN, + SERIO_RECONNECT_SUBTREE, SERIO_REGISTER_PORT, SERIO_ATTACH_DRIVER, }; @@ -292,8 +291,8 @@ static void serio_handle_event(void) serio_find_driver(event->object); break; - case SERIO_RECONNECT_CHAIN: - serio_reconnect_chain(event->object); + case SERIO_RECONNECT_SUBTREE: + serio_reconnect_subtree(event->object); break; case SERIO_ATTACH_DRIVER: @@ -330,12 +329,10 @@ static void serio_remove_pending_events(void *object) } /* - * Destroy child serio port (if any) that has not been fully registered yet. + * Locate child serio port (if any) that has not been fully registered yet. * - * Note that we rely on the fact that port can have only one child and therefore - * only one child registration request can be pending. Additionally, children - * are registered by driver's connect() handler so there can't be a grandchild - * pending registration together with a child. + * Children are registered by driver's connect() handler so there can't be a + * grandchild pending registration together with a child. */ static struct serio *serio_get_pending_child(struct serio *parent) { @@ -449,7 +446,7 @@ static ssize_t serio_rebind_driver(struct device *dev, struct device_attribute * if (!strncmp(buf, "none", count)) { serio_disconnect_port(serio); } else if (!strncmp(buf, "reconnect", count)) { - serio_reconnect_chain(serio); + serio_reconnect_subtree(serio); } else if (!strncmp(buf, "rescan", count)) { serio_disconnect_port(serio); serio_find_driver(serio); @@ -516,6 +513,8 @@ static void serio_init_port(struct serio *serio) __module_get(THIS_MODULE); INIT_LIST_HEAD(&serio->node); + INIT_LIST_HEAD(&serio->child_node); + INIT_LIST_HEAD(&serio->children); spin_lock_init(&serio->lock); mutex_init(&serio->drv_mutex); device_initialize(&serio->dev); @@ -538,12 +537,13 @@ static void serio_init_port(struct serio *serio) */ static void serio_add_port(struct serio *serio) { + struct serio *parent = serio->parent; int error; - if (serio->parent) { - serio_pause_rx(serio->parent); - serio->parent->child = serio; - serio_continue_rx(serio->parent); + if (parent) { + serio_pause_rx(parent); + list_add_tail(&serio->child_node, &parent->children); + serio_continue_rx(parent); } list_add_tail(&serio->node, &serio_list); @@ -559,15 +559,14 @@ static void serio_add_port(struct serio *serio) } /* - * serio_destroy_port() completes deregistration process and removes + * serio_destroy_port() completes unregistration process and removes * port from the system */ static void serio_destroy_port(struct serio *serio) { struct serio *child; - child = serio_get_pending_child(serio); - if (child) { + while ((child = serio_get_pending_child(serio)) != NULL) { serio_remove_pending_events(child); put_device(&child->dev); } @@ -577,7 +576,7 @@ static void serio_destroy_port(struct serio *serio) if (serio->parent) { serio_pause_rx(serio->parent); - serio->parent->child = NULL; + list_del_init(&serio->child_node); serio_continue_rx(serio->parent); serio->parent = NULL; } @@ -609,46 +608,82 @@ static int serio_reconnect_port(struct serio *serio) } /* - * Reconnect serio port and all its children (re-initialize attached devices) + * Reconnect serio port and all its children (re-initialize attached + * devices). */ -static void serio_reconnect_chain(struct serio *serio) +static void serio_reconnect_subtree(struct serio *root) { + struct serio *s = root; + int error; + do { - if (serio_reconnect_port(serio)) { - /* Ok, old children are now gone, we are done */ - break; + error = serio_reconnect_port(s); + if (!error) { + /* + * Reconnect was successful, move on to do the + * first child. + */ + if (!list_empty(&s->children)) { + s = list_first_entry(&s->children, + struct serio, child_node); + continue; + } } - serio = serio->child; - } while (serio); + + /* + * Either it was a leaf node or reconnect failed and it + * became a leaf node. Continue reconnecting starting with + * the next sibling of the parent node. + */ + while (s != root) { + struct serio *parent = s->parent; + + if (!list_is_last(&s->child_node, &parent->children)) { + s = list_entry(s->child_node.next, + struct serio, child_node); + break; + } + + s = parent; + } + } while (s != root); } /* * serio_disconnect_port() unbinds a port from its driver. As a side effect - * all child ports are unbound and destroyed. + * all children ports are unbound and destroyed. */ static void serio_disconnect_port(struct serio *serio) { - struct serio *s, *parent; + struct serio *s = serio; + + /* + * Children ports should be disconnected and destroyed + * first; we travel the tree in depth-first order. + */ + while (!list_empty(&serio->children)) { + + /* Locate a leaf */ + while (!list_empty(&s->children)) + s = list_first_entry(&s->children, + struct serio, child_node); - if (serio->child) { /* - * Children ports should be disconnected and destroyed - * first, staring with the leaf one, since we don't want - * to do recursion + * Prune this leaf node unless it is the one we + * started with. */ - for (s = serio; s->child; s = s->child) - /* empty */; - - do { - parent = s->parent; + if (s != serio) { + struct serio *parent = s->parent; device_release_driver(&s->dev); serio_destroy_port(s); - } while ((s = parent) != serio); + + s = parent; + } } /* - * Ok, no children left, now disconnect this port + * OK, no children left, now disconnect this port. */ device_release_driver(&serio->dev); } @@ -661,7 +696,7 @@ EXPORT_SYMBOL(serio_rescan); void serio_reconnect(struct serio *serio) { - serio_queue_event(serio, NULL, SERIO_RECONNECT_CHAIN); + serio_queue_event(serio, NULL, SERIO_RECONNECT_SUBTREE); } EXPORT_SYMBOL(serio_reconnect); @@ -689,14 +724,16 @@ void serio_unregister_port(struct serio *serio) EXPORT_SYMBOL(serio_unregister_port); /* - * Safely unregisters child port if one is present. + * Safely unregisters children ports if they are present. */ void serio_unregister_child_port(struct serio *serio) { + struct serio *s, *next; + mutex_lock(&serio_mutex); - if (serio->child) { - serio_disconnect_port(serio->child); - serio_destroy_port(serio->child); + list_for_each_entry_safe(s, next, &serio->children, child_node) { + serio_disconnect_port(s); + serio_destroy_port(s); } mutex_unlock(&serio_mutex); } diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c index 014248344763..a29a7812bd46 100644 --- a/drivers/input/sparse-keymap.c +++ b/drivers/input/sparse-keymap.c @@ -22,6 +22,37 @@ MODULE_DESCRIPTION("Generic support for sparse keymaps"); MODULE_LICENSE("GPL v2"); MODULE_VERSION("0.1"); +static unsigned int sparse_keymap_get_key_index(struct input_dev *dev, + const struct key_entry *k) +{ + struct key_entry *key; + unsigned int idx = 0; + + for (key = dev->keycode; key->type != KE_END; key++) { + if (key->type == KE_KEY) { + if (key == k) + break; + idx++; + } + } + + return idx; +} + +static struct key_entry *sparse_keymap_entry_by_index(struct input_dev *dev, + unsigned int index) +{ + struct key_entry *key; + unsigned int key_cnt = 0; + + for (key = dev->keycode; key->type != KE_END; key++) + if (key->type == KE_KEY) + if (key_cnt++ == index) + return key; + + return NULL; +} + /** * sparse_keymap_entry_from_scancode - perform sparse keymap lookup * @dev: Input device using sparse keymap @@ -64,16 +95,36 @@ struct key_entry *sparse_keymap_entry_from_keycode(struct input_dev *dev, } EXPORT_SYMBOL(sparse_keymap_entry_from_keycode); +static struct key_entry *sparse_keymap_locate(struct input_dev *dev, + const struct input_keymap_entry *ke) +{ + struct key_entry *key; + unsigned int scancode; + + if (ke->flags & INPUT_KEYMAP_BY_INDEX) + key = sparse_keymap_entry_by_index(dev, ke->index); + else if (input_scancode_to_scalar(ke, &scancode) == 0) + key = sparse_keymap_entry_from_scancode(dev, scancode); + else + key = NULL; + + return key; +} + static int sparse_keymap_getkeycode(struct input_dev *dev, - unsigned int scancode, - unsigned int *keycode) + struct input_keymap_entry *ke) { const struct key_entry *key; if (dev->keycode) { - key = sparse_keymap_entry_from_scancode(dev, scancode); + key = sparse_keymap_locate(dev, ke); if (key && key->type == KE_KEY) { - *keycode = key->keycode; + ke->keycode = key->keycode; + if (!(ke->flags & INPUT_KEYMAP_BY_INDEX)) + ke->index = + sparse_keymap_get_key_index(dev, key); + ke->len = sizeof(key->code); + memcpy(ke->scancode, &key->code, sizeof(key->code)); return 0; } } @@ -82,20 +133,19 @@ static int sparse_keymap_getkeycode(struct input_dev *dev, } static int sparse_keymap_setkeycode(struct input_dev *dev, - unsigned int scancode, - unsigned int keycode) + const struct input_keymap_entry *ke, + unsigned int *old_keycode) { struct key_entry *key; - int old_keycode; if (dev->keycode) { - key = sparse_keymap_entry_from_scancode(dev, scancode); + key = sparse_keymap_locate(dev, ke); if (key && key->type == KE_KEY) { - old_keycode = key->keycode; - key->keycode = keycode; - set_bit(keycode, dev->keybit); - if (!sparse_keymap_entry_from_keycode(dev, old_keycode)) - clear_bit(old_keycode, dev->keybit); + *old_keycode = key->keycode; + key->keycode = ke->keycode; + set_bit(ke->keycode, dev->keybit); + if (!sparse_keymap_entry_from_keycode(dev, *old_keycode)) + clear_bit(*old_keycode, dev->keybit); return 0; } } @@ -159,15 +209,14 @@ int sparse_keymap_setup(struct input_dev *dev, dev->keycode = map; dev->keycodemax = map_size; - dev->getkeycode = sparse_keymap_getkeycode; - dev->setkeycode = sparse_keymap_setkeycode; + dev->getkeycode_new = sparse_keymap_getkeycode; + dev->setkeycode_new = sparse_keymap_setkeycode; return 0; err_out: kfree(map); return error; - } EXPORT_SYMBOL(sparse_keymap_setup); diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig index effb49ea24aa..58a87755b936 100644 --- a/drivers/input/tablet/Kconfig +++ b/drivers/input/tablet/Kconfig @@ -49,6 +49,17 @@ config TABLET_USB_GTCO To compile this driver as a module, choose M here: the module will be called gtco. +config TABLET_USB_HANWANG + tristate "Hanwang Art Master III tablet support (USB)" + depends on USB_ARCH_HAS_HCD + select USB + help + Say Y here if you want to use the USB version of the Hanwang Art + Master III tablet. + + To compile this driver as a module, choose M here: the + module will be called hanwang. + config TABLET_USB_KBTAB tristate "KB Gear JamStudio tablet support (USB)" depends on USB_ARCH_HAS_HCD diff --git a/drivers/input/tablet/Makefile b/drivers/input/tablet/Makefile index ce8b9a9cfa40..3f6c25220638 100644 --- a/drivers/input/tablet/Makefile +++ b/drivers/input/tablet/Makefile @@ -8,5 +8,6 @@ wacom-objs := wacom_wac.o wacom_sys.o obj-$(CONFIG_TABLET_USB_ACECAD) += acecad.o obj-$(CONFIG_TABLET_USB_AIPTEK) += aiptek.o obj-$(CONFIG_TABLET_USB_GTCO) += gtco.o +obj-$(CONFIG_TABLET_USB_HANWANG) += hanwang.o obj-$(CONFIG_TABLET_USB_KBTAB) += kbtab.o obj-$(CONFIG_TABLET_USB_WACOM) += wacom.o diff --git a/drivers/input/tablet/hanwang.c b/drivers/input/tablet/hanwang.c new file mode 100644 index 000000000000..6504b627b234 --- /dev/null +++ b/drivers/input/tablet/hanwang.c @@ -0,0 +1,446 @@ +/* + * USB Hanwang tablet support + * + * Copyright (c) 2010 Xing Wei <weixing@hanwang.com.cn> + * + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/usb/input.h> + +#define DRIVER_AUTHOR "Xing Wei <weixing@hanwang.com.cn>" +#define DRIVER_DESC "USB Hanwang tablet driver" +#define DRIVER_LICENSE "GPL" + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE(DRIVER_LICENSE); + +#define USB_VENDOR_ID_HANWANG 0x0b57 +#define HANWANG_TABLET_INT_CLASS 0x0003 +#define HANWANG_TABLET_INT_SUB_CLASS 0x0001 +#define HANWANG_TABLET_INT_PROTOCOL 0x0002 + +#define ART_MASTER_PKGLEN_MAX 10 + +/* device IDs */ +#define STYLUS_DEVICE_ID 0x02 +#define TOUCH_DEVICE_ID 0x03 +#define CURSOR_DEVICE_ID 0x06 +#define ERASER_DEVICE_ID 0x0A +#define PAD_DEVICE_ID 0x0F + +/* match vendor and interface info */ +#define HANWANG_TABLET_DEVICE(vend, cl, sc, pr) \ + .match_flags = USB_DEVICE_ID_MATCH_VENDOR \ + | USB_DEVICE_ID_MATCH_INT_INFO, \ + .idVendor = (vend), \ + .bInterfaceClass = (cl), \ + .bInterfaceSubClass = (sc), \ + .bInterfaceProtocol = (pr) + +enum hanwang_tablet_type { + HANWANG_ART_MASTER_III, + HANWANG_ART_MASTER_HD, +}; + +struct hanwang { + unsigned char *data; + dma_addr_t data_dma; + struct input_dev *dev; + struct usb_device *usbdev; + struct urb *irq; + const struct hanwang_features *features; + unsigned int current_tool; + unsigned int current_id; + char name[64]; + char phys[32]; +}; + +struct hanwang_features { + unsigned short pid; + char *name; + enum hanwang_tablet_type type; + int pkg_len; + int max_x; + int max_y; + int max_tilt_x; + int max_tilt_y; + int max_pressure; +}; + +static const struct hanwang_features features_array[] = { + { 0x8528, "Hanwang Art Master III 0906", HANWANG_ART_MASTER_III, + ART_MASTER_PKGLEN_MAX, 0x5757, 0x3692, 0x3f, 0x7f, 2048 }, + { 0x8529, "Hanwang Art Master III 0604", HANWANG_ART_MASTER_III, + ART_MASTER_PKGLEN_MAX, 0x3d84, 0x2672, 0x3f, 0x7f, 2048 }, + { 0x852a, "Hanwang Art Master III 1308", HANWANG_ART_MASTER_III, + ART_MASTER_PKGLEN_MAX, 0x7f00, 0x4f60, 0x3f, 0x7f, 2048 }, + { 0x8401, "Hanwang Art Master HD 5012", HANWANG_ART_MASTER_HD, + ART_MASTER_PKGLEN_MAX, 0x678e, 0x4150, 0x3f, 0x7f, 1024 }, +}; + +static const int hw_eventtypes[] = { + EV_KEY, EV_ABS, EV_MSC, +}; + +static const int hw_absevents[] = { + ABS_X, ABS_Y, ABS_TILT_X, ABS_TILT_Y, ABS_WHEEL, + ABS_RX, ABS_RY, ABS_PRESSURE, ABS_MISC, +}; + +static const int hw_btnevents[] = { + BTN_STYLUS, BTN_STYLUS2, BTN_TOOL_PEN, BTN_TOOL_RUBBER, + BTN_TOOL_MOUSE, BTN_TOOL_FINGER, + BTN_0, BTN_1, BTN_2, BTN_3, BTN_4, BTN_5, BTN_6, BTN_7, BTN_8, +}; + +static const int hw_mscevents[] = { + MSC_SERIAL, +}; + +static void hanwang_parse_packet(struct hanwang *hanwang) +{ + unsigned char *data = hanwang->data; + struct input_dev *input_dev = hanwang->dev; + struct usb_device *dev = hanwang->usbdev; + enum hanwang_tablet_type type = hanwang->features->type; + int i; + u16 x, y, p; + + switch (data[0]) { + case 0x02: /* data packet */ + switch (data[1]) { + case 0x80: /* tool prox out */ + hanwang->current_id = 0; + input_report_key(input_dev, hanwang->current_tool, 0); + break; + + case 0xc2: /* first time tool prox in */ + switch (data[3] & 0xf0) { + case 0x20: /* art_master III */ + case 0x30: /* art_master_HD */ + hanwang->current_id = STYLUS_DEVICE_ID; + hanwang->current_tool = BTN_TOOL_PEN; + input_report_key(input_dev, BTN_TOOL_PEN, 1); + break; + case 0xa0: /* art_master III */ + case 0xb0: /* art_master_HD */ + hanwang->current_id = ERASER_DEVICE_ID; + hanwang->current_tool = BTN_TOOL_RUBBER; + input_report_key(input_dev, BTN_TOOL_RUBBER, 1); + break; + default: + hanwang->current_id = 0; + dev_dbg(&dev->dev, + "unknown tablet tool %02x ", data[0]); + break; + } + break; + + default: /* tool data packet */ + x = (data[2] << 8) | data[3]; + y = (data[4] << 8) | data[5]; + + switch (type) { + case HANWANG_ART_MASTER_III: + p = (data[6] << 3) | + ((data[7] & 0xc0) >> 5) | + (data[1] & 0x01); + break; + + case HANWANG_ART_MASTER_HD: + p = (data[7] >> 6) | (data[6] << 2); + break; + + default: + p = 0; + break; + } + + input_report_abs(input_dev, ABS_X, + le16_to_cpup((__le16 *)&x)); + input_report_abs(input_dev, ABS_Y, + le16_to_cpup((__le16 *)&y)); + input_report_abs(input_dev, ABS_PRESSURE, + le16_to_cpup((__le16 *)&p)); + input_report_abs(input_dev, ABS_TILT_X, data[7] & 0x3f); + input_report_abs(input_dev, ABS_TILT_Y, data[8] & 0x7f); + input_report_key(input_dev, BTN_STYLUS, data[1] & 0x02); + input_report_key(input_dev, BTN_STYLUS2, data[1] & 0x04); + break; + } + input_report_abs(input_dev, ABS_MISC, hanwang->current_id); + input_event(input_dev, EV_MSC, MSC_SERIAL, + hanwang->features->pid); + break; + + case 0x0c: + /* roll wheel */ + hanwang->current_id = PAD_DEVICE_ID; + + switch (type) { + case HANWANG_ART_MASTER_III: + input_report_key(input_dev, BTN_TOOL_FINGER, data[1] || + data[2] || data[3]); + input_report_abs(input_dev, ABS_WHEEL, data[1]); + input_report_key(input_dev, BTN_0, data[2]); + for (i = 0; i < 8; i++) + input_report_key(input_dev, + BTN_1 + i, data[3] & (1 << i)); + break; + + case HANWANG_ART_MASTER_HD: + input_report_key(input_dev, BTN_TOOL_FINGER, data[1] || + data[2] || data[3] || data[4] || + data[5] || data[6]); + input_report_abs(input_dev, ABS_RX, + ((data[1] & 0x1f) << 8) | data[2]); + input_report_abs(input_dev, ABS_RY, + ((data[3] & 0x1f) << 8) | data[4]); + input_report_key(input_dev, BTN_0, data[5] & 0x01); + for (i = 0; i < 4; i++) { + input_report_key(input_dev, + BTN_1 + i, data[5] & (1 << i)); + input_report_key(input_dev, + BTN_5 + i, data[6] & (1 << i)); + } + break; + } + + input_report_abs(input_dev, ABS_MISC, hanwang->current_id); + input_event(input_dev, EV_MSC, MSC_SERIAL, 0xffffffff); + break; + + default: + dev_dbg(&dev->dev, "error packet %02x ", data[0]); + break; + } + + input_sync(input_dev); +} + +static void hanwang_irq(struct urb *urb) +{ + struct hanwang *hanwang = urb->context; + struct usb_device *dev = hanwang->usbdev; + int retval; + + switch (urb->status) { + case 0: + /* success */; + hanwang_parse_packet(hanwang); + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_err(&dev->dev, "%s - urb shutting down with status: %d", + __func__, urb->status); + return; + default: + dev_err(&dev->dev, "%s - nonzero urb status received: %d", + __func__, urb->status); + break; + } + + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + dev_err(&dev->dev, "%s - usb_submit_urb failed with result %d", + __func__, retval); +} + +static int hanwang_open(struct input_dev *dev) +{ + struct hanwang *hanwang = input_get_drvdata(dev); + + hanwang->irq->dev = hanwang->usbdev; + if (usb_submit_urb(hanwang->irq, GFP_KERNEL)) + return -EIO; + + return 0; +} + +static void hanwang_close(struct input_dev *dev) +{ + struct hanwang *hanwang = input_get_drvdata(dev); + + usb_kill_urb(hanwang->irq); +} + +static bool get_features(struct usb_device *dev, struct hanwang *hanwang) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(features_array); i++) { + if (le16_to_cpu(dev->descriptor.idProduct) == + features_array[i].pid) { + hanwang->features = &features_array[i]; + return true; + } + } + + return false; +} + + +static int hanwang_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_endpoint_descriptor *endpoint; + struct hanwang *hanwang; + struct input_dev *input_dev; + int error; + int i; + + hanwang = kzalloc(sizeof(struct hanwang), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!hanwang || !input_dev) { + error = -ENOMEM; + goto fail1; + } + + if (!get_features(dev, hanwang)) { + error = -ENXIO; + goto fail1; + } + + hanwang->data = usb_alloc_coherent(dev, hanwang->features->pkg_len, + GFP_KERNEL, &hanwang->data_dma); + if (!hanwang->data) { + error = -ENOMEM; + goto fail1; + } + + hanwang->irq = usb_alloc_urb(0, GFP_KERNEL); + if (!hanwang->irq) { + error = -ENOMEM; + goto fail2; + } + + hanwang->usbdev = dev; + hanwang->dev = input_dev; + + usb_make_path(dev, hanwang->phys, sizeof(hanwang->phys)); + strlcat(hanwang->phys, "/input0", sizeof(hanwang->phys)); + + strlcpy(hanwang->name, hanwang->features->name, sizeof(hanwang->name)); + input_dev->name = hanwang->name; + input_dev->phys = hanwang->phys; + usb_to_input_id(dev, &input_dev->id); + input_dev->dev.parent = &intf->dev; + + input_set_drvdata(input_dev, hanwang); + + input_dev->open = hanwang_open; + input_dev->close = hanwang_close; + + for (i = 0; i < ARRAY_SIZE(hw_eventtypes); ++i) + __set_bit(hw_eventtypes[i], input_dev->evbit); + + for (i = 0; i < ARRAY_SIZE(hw_absevents); ++i) + __set_bit(hw_absevents[i], input_dev->absbit); + + for (i = 0; i < ARRAY_SIZE(hw_btnevents); ++i) + __set_bit(hw_btnevents[i], input_dev->keybit); + + for (i = 0; i < ARRAY_SIZE(hw_mscevents); ++i) + __set_bit(hw_mscevents[i], input_dev->mscbit); + + input_set_abs_params(input_dev, ABS_X, + 0, hanwang->features->max_x, 4, 0); + input_set_abs_params(input_dev, ABS_Y, + 0, hanwang->features->max_y, 4, 0); + input_set_abs_params(input_dev, ABS_TILT_X, + 0, hanwang->features->max_tilt_x, 0, 0); + input_set_abs_params(input_dev, ABS_TILT_Y, + 0, hanwang->features->max_tilt_y, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, + 0, hanwang->features->max_pressure, 0, 0); + + endpoint = &intf->cur_altsetting->endpoint[0].desc; + usb_fill_int_urb(hanwang->irq, dev, + usb_rcvintpipe(dev, endpoint->bEndpointAddress), + hanwang->data, hanwang->features->pkg_len, + hanwang_irq, hanwang, endpoint->bInterval); + hanwang->irq->transfer_dma = hanwang->data_dma; + hanwang->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + error = input_register_device(hanwang->dev); + if (error) + goto fail3; + + usb_set_intfdata(intf, hanwang); + + return 0; + + fail3: usb_free_urb(hanwang->irq); + fail2: usb_free_coherent(dev, hanwang->features->pkg_len, + hanwang->data, hanwang->data_dma); + fail1: input_free_device(input_dev); + kfree(hanwang); + return error; + +} + +static void hanwang_disconnect(struct usb_interface *intf) +{ + struct hanwang *hanwang = usb_get_intfdata(intf); + + input_unregister_device(hanwang->dev); + usb_free_urb(hanwang->irq); + usb_free_coherent(interface_to_usbdev(intf), + hanwang->features->pkg_len, hanwang->data, + hanwang->data_dma); + kfree(hanwang); + usb_set_intfdata(intf, NULL); +} + +static const struct usb_device_id hanwang_ids[] = { + { HANWANG_TABLET_DEVICE(USB_VENDOR_ID_HANWANG, HANWANG_TABLET_INT_CLASS, + HANWANG_TABLET_INT_SUB_CLASS, HANWANG_TABLET_INT_PROTOCOL) }, + {} +}; + +MODULE_DEVICE_TABLE(usb, hanwang_ids); + +static struct usb_driver hanwang_driver = { + .name = "hanwang", + .probe = hanwang_probe, + .disconnect = hanwang_disconnect, + .id_table = hanwang_ids, +}; + +static int __init hanwang_init(void) +{ + return usb_register(&hanwang_driver); +} + +static void __exit hanwang_exit(void) +{ + usb_deregister(&hanwang_driver); +} + +module_init(hanwang_init); +module_exit(hanwang_exit); diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h index 284dfaab6b8c..de5adb109030 100644 --- a/drivers/input/tablet/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -118,6 +118,7 @@ struct wacom { extern const struct usb_device_id wacom_ids[]; void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len); +void wacom_setup_device_quirks(struct wacom_features *features); void wacom_setup_input_capabilities(struct input_dev *input_dev, struct wacom_wac *wacom_wac); #endif diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index b35876ee6908..fc381498b798 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -120,14 +120,16 @@ static int wacom_open(struct input_dev *dev) out: mutex_unlock(&wacom->lock); - if (retval) - usb_autopm_put_interface(wacom->intf); + usb_autopm_put_interface(wacom->intf); return retval; } static void wacom_close(struct input_dev *dev) { struct wacom *wacom = input_get_drvdata(dev); + int autopm_error; + + autopm_error = usb_autopm_get_interface(wacom->intf); mutex_lock(&wacom->lock); usb_kill_urb(wacom->irq); @@ -135,7 +137,8 @@ static void wacom_close(struct input_dev *dev) wacom->intf->needs_remote_wakeup = 0; mutex_unlock(&wacom->lock); - usb_autopm_put_interface(wacom->intf); + if (!autopm_error) + usb_autopm_put_interface(wacom->intf); } static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc, @@ -196,17 +199,30 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi features->pktlen = WACOM_PKGLEN_TPC2FG; features->device_type = BTN_TOOL_TRIPLETAP; } - features->x_max = - get_unaligned_le16(&report[i + 3]); - features->x_phy = - get_unaligned_le16(&report[i + 6]); - features->unit = report[i + 9]; - features->unitExpo = report[i + 11]; - i += 12; + if (features->type == BAMBOO_PT) { + /* need to reset back */ + features->pktlen = WACOM_PKGLEN_BBTOUCH; + features->device_type = BTN_TOOL_TRIPLETAP; + features->x_phy = + get_unaligned_le16(&report[i + 5]); + features->x_max = + get_unaligned_le16(&report[i + 8]); + i += 15; + } else { + features->x_max = + get_unaligned_le16(&report[i + 3]); + features->x_phy = + get_unaligned_le16(&report[i + 6]); + features->unit = report[i + 9]; + features->unitExpo = report[i + 11]; + i += 12; + } } else if (pen) { /* penabled only accepts exact bytes of data */ if (features->type == TABLETPC2FG) features->pktlen = WACOM_PKGLEN_GRAPHIRE; + if (features->type == BAMBOO_PT) + features->pktlen = WACOM_PKGLEN_BBFUN; features->device_type = BTN_TOOL_PEN; features->x_max = get_unaligned_le16(&report[i + 3]); @@ -235,6 +251,15 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi features->y_phy = get_unaligned_le16(&report[i + 6]); i += 7; + } else if (features->type == BAMBOO_PT) { + /* need to reset back */ + features->pktlen = WACOM_PKGLEN_BBTOUCH; + features->device_type = BTN_TOOL_TRIPLETAP; + features->y_phy = + get_unaligned_le16(&report[i + 3]); + features->y_max = + get_unaligned_le16(&report[i + 6]); + i += 12; } else { features->y_max = features->x_max; @@ -246,6 +271,8 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi /* penabled only accepts exact bytes of data */ if (features->type == TABLETPC2FG) features->pktlen = WACOM_PKGLEN_GRAPHIRE; + if (features->type == BAMBOO_PT) + features->pktlen = WACOM_PKGLEN_BBFUN; features->device_type = BTN_TOOL_PEN; features->y_max = get_unaligned_le16(&report[i + 3]); @@ -296,8 +323,9 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat if (!rep_data) return error; - /* ask to report tablet data if it is 2FGT or not a Tablet PC */ - if (features->device_type == BTN_TOOL_TRIPLETAP) { + /* ask to report tablet data if it is 2FGT Tablet PC or + * not a Tablet PC */ + if (features->type == TABLETPC2FG) { do { rep_data[0] = 3; rep_data[1] = 4; @@ -309,7 +337,7 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat WAC_HID_FEATURE_REPORT, report_id, rep_data, 3); } while ((error < 0 || rep_data[1] != 4) && limit++ < 5); - } else if (features->type != TABLETPC && features->type != TABLETPC2FG) { + } else if (features->type != TABLETPC) { do { rep_data[0] = 2; rep_data[1] = 2; @@ -334,11 +362,16 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf, struct usb_host_interface *interface = intf->cur_altsetting; struct hid_descriptor *hid_desc; - /* default device to penabled */ + /* default features */ features->device_type = BTN_TOOL_PEN; - - /* only Tablet PCs need to retrieve the info */ - if ((features->type != TABLETPC) && (features->type != TABLETPC2FG)) + features->x_fuzz = 4; + features->y_fuzz = 4; + features->pressure_fuzz = 0; + features->distance_fuzz = 0; + + /* only Tablet PCs and Bamboo P&T need to retrieve the info */ + if ((features->type != TABLETPC) && (features->type != TABLETPC2FG) && + (features->type != BAMBOO_PT)) goto out; if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) { @@ -353,12 +386,6 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf, if (error) goto out; - /* touch device found but size is not defined. use default */ - if (features->device_type == BTN_TOOL_DOUBLETAP && !features->x_max) { - features->x_max = 1023; - features->y_max = 1023; - } - out: return error; } @@ -494,9 +521,11 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i if (error) goto fail2; + wacom_setup_device_quirks(features); + strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name)); - if (features->type == TABLETPC || features->type == TABLETPC2FG) { + if (features->quirks & WACOM_QUIRK_MULTI_INPUT) { /* Append the device type to the name */ strlcat(wacom_wac->name, features->device_type == BTN_TOOL_PEN ? diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 47fd7a041c52..b3252ef1e279 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -857,6 +857,134 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len) return retval; } +static int wacom_bpt_touch(struct wacom_wac *wacom) +{ + struct wacom_features *features = &wacom->features; + struct input_dev *input = wacom->input; + unsigned char *data = wacom->data; + int sp = 0, sx = 0, sy = 0, count = 0; + int i; + + for (i = 0; i < 2; i++) { + int p = data[9 * i + 2]; + input_mt_slot(input, i); + /* + * Touch events need to be disabled while stylus is + * in proximity because user's hand is resting on touchpad + * and sending unwanted events. User expects tablet buttons + * to continue working though. + */ + if (p && !wacom->shared->stylus_in_proximity) { + int x = get_unaligned_be16(&data[9 * i + 3]) & 0x7ff; + int y = get_unaligned_be16(&data[9 * i + 5]) & 0x7ff; + if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) { + x <<= 5; + y <<= 5; + } + input_report_abs(input, ABS_MT_PRESSURE, p); + input_report_abs(input, ABS_MT_POSITION_X, x); + input_report_abs(input, ABS_MT_POSITION_Y, y); + if (wacom->id[i] < 0) + wacom->id[i] = wacom->trk_id++ & MAX_TRACKING_ID; + if (!count++) + sp = p, sx = x, sy = y; + } else { + wacom->id[i] = -1; + } + input_report_abs(input, ABS_MT_TRACKING_ID, wacom->id[i]); + } + + input_report_key(input, BTN_TOUCH, count > 0); + input_report_key(input, BTN_TOOL_FINGER, count == 1); + input_report_key(input, BTN_TOOL_DOUBLETAP, count == 2); + + input_report_abs(input, ABS_PRESSURE, sp); + input_report_abs(input, ABS_X, sx); + input_report_abs(input, ABS_Y, sy); + + input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0); + input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0); + input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0); + input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0); + + input_sync(input); + + return 0; +} + +static int wacom_bpt_pen(struct wacom_wac *wacom) +{ + struct input_dev *input = wacom->input; + unsigned char *data = wacom->data; + int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0; + + /* + * Similar to Graphire protocol, data[1] & 0x20 is proximity and + * data[1] & 0x18 is tool ID. 0x30 is safety check to ignore + * 2 unused tool ID's. + */ + prox = (data[1] & 0x30) == 0x30; + + /* + * All reports shared between PEN and RUBBER tool must be + * forced to a known starting value (zero) when transitioning to + * out-of-prox. + * + * If not reset then, to userspace, it will look like lost events + * if new tool comes in-prox with same values as previous tool sent. + * + * Hardware does report zero in most out-of-prox cases but not all. + */ + if (prox) { + if (!wacom->shared->stylus_in_proximity) { + if (data[1] & 0x08) { + wacom->tool[0] = BTN_TOOL_RUBBER; + wacom->id[0] = ERASER_DEVICE_ID; + } else { + wacom->tool[0] = BTN_TOOL_PEN; + wacom->id[0] = STYLUS_DEVICE_ID; + } + wacom->shared->stylus_in_proximity = true; + } + x = le16_to_cpup((__le16 *)&data[2]); + y = le16_to_cpup((__le16 *)&data[4]); + p = le16_to_cpup((__le16 *)&data[6]); + d = data[8]; + pen = data[1] & 0x01; + btn1 = data[1] & 0x02; + btn2 = data[1] & 0x04; + } + + input_report_key(input, BTN_TOUCH, pen); + input_report_key(input, BTN_STYLUS, btn1); + input_report_key(input, BTN_STYLUS2, btn2); + + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + input_report_abs(input, ABS_PRESSURE, p); + input_report_abs(input, ABS_DISTANCE, d); + + if (!prox) { + wacom->id[0] = 0; + wacom->shared->stylus_in_proximity = false; + } + + input_report_key(input, wacom->tool[0], prox); /* PEN or RUBBER */ + input_report_abs(input, ABS_MISC, wacom->id[0]); /* TOOL ID */ + + return 1; +} + +static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len) +{ + if (len == WACOM_PKGLEN_BBTOUCH) + return wacom_bpt_touch(wacom); + else if (len == WACOM_PKGLEN_BBFUN) + return wacom_bpt_pen(wacom); + + return 0; +} + void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) { bool sync; @@ -902,6 +1030,10 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) sync = wacom_tpc_irq(wacom_wac, len); break; + case BAMBOO_PT: + sync = wacom_bpt_irq(wacom_wac, len); + break; + default: sync = false; break; @@ -911,26 +1043,17 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) input_sync(wacom_wac->input); } -static void wacom_setup_intuos(struct wacom_wac *wacom_wac) +static void wacom_setup_cintiq(struct wacom_wac *wacom_wac) { struct input_dev *input_dev = wacom_wac->input; input_set_capability(input_dev, EV_MSC, MSC_SERIAL); - input_set_capability(input_dev, EV_REL, REL_WHEEL); - - __set_bit(BTN_LEFT, input_dev->keybit); - __set_bit(BTN_RIGHT, input_dev->keybit); - __set_bit(BTN_MIDDLE, input_dev->keybit); - __set_bit(BTN_SIDE, input_dev->keybit); - __set_bit(BTN_EXTRA, input_dev->keybit); __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); __set_bit(BTN_TOOL_PEN, input_dev->keybit); - __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); __set_bit(BTN_TOOL_BRUSH, input_dev->keybit); __set_bit(BTN_TOOL_PENCIL, input_dev->keybit); __set_bit(BTN_TOOL_AIRBRUSH, input_dev->keybit); - __set_bit(BTN_TOOL_LENS, input_dev->keybit); __set_bit(BTN_STYLUS, input_dev->keybit); __set_bit(BTN_STYLUS2, input_dev->keybit); @@ -939,10 +1062,55 @@ static void wacom_setup_intuos(struct wacom_wac *wacom_wac) input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0); input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0); input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0); +} + +static void wacom_setup_intuos(struct wacom_wac *wacom_wac) +{ + struct input_dev *input_dev = wacom_wac->input; + + input_set_capability(input_dev, EV_REL, REL_WHEEL); + + wacom_setup_cintiq(wacom_wac); + + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + __set_bit(BTN_MIDDLE, input_dev->keybit); + __set_bit(BTN_SIDE, input_dev->keybit); + __set_bit(BTN_EXTRA, input_dev->keybit); + __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); + __set_bit(BTN_TOOL_LENS, input_dev->keybit); + input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0); input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0); } +void wacom_setup_device_quirks(struct wacom_features *features) +{ + + /* touch device found but size is not defined. use default */ + if (features->device_type == BTN_TOOL_DOUBLETAP && !features->x_max) { + features->x_max = 1023; + features->y_max = 1023; + } + + /* these device have multiple inputs */ + if (features->type == TABLETPC || features->type == TABLETPC2FG || + features->type == BAMBOO_PT) + features->quirks |= WACOM_QUIRK_MULTI_INPUT; + + /* quirks for bamboo touch */ + if (features->type == BAMBOO_PT && + features->device_type == BTN_TOOL_TRIPLETAP) { + features->x_max <<= 5; + features->y_max <<= 5; + features->x_fuzz <<= 5; + features->y_fuzz <<= 5; + features->pressure_max = 256; + features->pressure_fuzz = 16; + features->quirks |= WACOM_QUIRK_BBTOUCH_LOWRES; + } +} + void wacom_setup_input_capabilities(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { @@ -953,9 +1121,12 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(BTN_TOUCH, input_dev->keybit); - input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0); - input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0); + input_set_abs_params(input_dev, ABS_X, 0, features->x_max, + features->x_fuzz, 0); + input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, + features->y_fuzz, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, + features->pressure_fuzz, 0); __set_bit(ABS_MISC, input_dev->absbit); @@ -1005,9 +1176,19 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(BTN_9, input_dev->keybit); /* fall through */ + case CINTIQ: + for (i = 0; i < 8; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + __set_bit(BTN_TOOL_FINGER, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); + input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); + input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + wacom_setup_cintiq(wacom_wac); + break; + case INTUOS3: case INTUOS3L: - case CINTIQ: __set_bit(BTN_4, input_dev->keybit); __set_bit(BTN_5, input_dev->keybit); __set_bit(BTN_6, input_dev->keybit); @@ -1078,6 +1259,38 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, case PENPARTNER: __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); break; + + case BAMBOO_PT: + __clear_bit(ABS_MISC, input_dev->absbit); + + if (features->device_type == BTN_TOOL_TRIPLETAP) { + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_FORWARD, input_dev->keybit); + __set_bit(BTN_BACK, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + + __set_bit(BTN_TOOL_FINGER, input_dev->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); + + input_mt_create_slots(input_dev, 2); + input_set_abs_params(input_dev, ABS_MT_POSITION_X, + 0, features->x_max, + features->x_fuzz, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, + 0, features->y_max, + features->y_fuzz, 0); + input_set_abs_params(input_dev, ABS_MT_PRESSURE, + 0, features->pressure_max, + features->pressure_fuzz, 0); + input_set_abs_params(input_dev, ABS_MT_TRACKING_ID, 0, + MAX_TRACKING_ID, 0, 0); + } else if (features->device_type == BTN_TOOL_PEN) { + __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); + __set_bit(BTN_TOOL_PEN, input_dev->keybit); + __set_bit(BTN_STYLUS, input_dev->keybit); + __set_bit(BTN_STYLUS2, input_dev->keybit); + } + break; } } @@ -1215,6 +1428,14 @@ static const struct wacom_features wacom_features_0xE3 = { "Wacom ISDv4 E3", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255, 0, TABLETPC2FG }; static const struct wacom_features wacom_features_0x47 = { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS }; +static struct wacom_features wacom_features_0xD0 = + { "Wacom Bamboo 2FG", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; +static struct wacom_features wacom_features_0xD1 = + { "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; +static struct wacom_features wacom_features_0xD2 = + { "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; +static struct wacom_features wacom_features_0xD3 = + { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; #define USB_DEVICE_WACOM(prod) \ USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \ @@ -1279,6 +1500,10 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xC6) }, { USB_DEVICE_WACOM(0xC7) }, { USB_DEVICE_WACOM(0xCE) }, + { USB_DEVICE_WACOM(0xD0) }, + { USB_DEVICE_WACOM(0xD1) }, + { USB_DEVICE_WACOM(0xD2) }, + { USB_DEVICE_WACOM(0xD3) }, { USB_DEVICE_WACOM(0xF0) }, { USB_DEVICE_WACOM(0xCC) }, { USB_DEVICE_WACOM(0x90) }, diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index 99e1a54cd305..00ca01541d89 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -21,6 +21,7 @@ #define WACOM_PKGLEN_INTUOS 10 #define WACOM_PKGLEN_TPC1FG 5 #define WACOM_PKGLEN_TPC2FG 14 +#define WACOM_PKGLEN_BBTOUCH 20 /* device IDs */ #define STYLUS_DEVICE_ID 0x02 @@ -37,6 +38,13 @@ #define WACOM_REPORT_TPC1FG 6 #define WACOM_REPORT_TPC2FG 13 +/* device quirks */ +#define WACOM_QUIRK_MULTI_INPUT 0x0001 +#define WACOM_QUIRK_BBTOUCH_LOWRES 0x0002 + +/* largest reported tracking id */ +#define MAX_TRACKING_ID 0xfff + enum { PENPARTNER = 0, GRAPHIRE, @@ -44,6 +52,7 @@ enum { PTU, PL, DTU, + BAMBOO_PT, INTUOS, INTUOS3S, INTUOS3, @@ -73,6 +82,11 @@ struct wacom_features { int y_phy; unsigned char unit; unsigned char unitExpo; + int x_fuzz; + int y_fuzz; + int pressure_fuzz; + int distance_fuzz; + unsigned quirks; }; struct wacom_shared { @@ -86,6 +100,7 @@ struct wacom_wac { int id[3]; __u32 serial[2]; int last_finger; + int trk_id; struct wacom_features features; struct wacom_shared *shared; struct input_dev *input; diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 0069d9703fda..0ea361f23fa7 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -98,6 +98,18 @@ config TOUCHSCREEN_BITSY To compile this driver as a module, choose M here: the module will be called h3600_ts_input. +config TOUCHSCREEN_BU21013 + tristate "BU21013 based touch panel controllers" + depends on I2C + help + Say Y here if you have a bu21013 touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called bu21013_ts. + config TOUCHSCREEN_CY8CTMG110 tristate "cy8ctmg110 touchscreen" depends on I2C @@ -214,6 +226,16 @@ config TOUCHSCREEN_WACOM_W8001 To compile this driver as a module, choose M here: the module will be called wacom_w8001. +config TOUCHSCREEN_LPC32XX + tristate "LPC32XX touchscreen controller" + depends on ARCH_LPC32XX + help + Say Y here if you have a LPC32XX device and want + to support the built-in touchscreen. + + To compile this driver as a module, choose M here: the + module will be called lpc32xx_ts. + config TOUCHSCREEN_MCS5000 tristate "MELFAS MCS-5000 touchscreen" depends on I2C @@ -250,6 +272,18 @@ config TOUCHSCREEN_INEXIO To compile this driver as a module, choose M here: the module will be called inexio. +config TOUCHSCREEN_INTEL_MID + tristate "Intel MID platform resistive touchscreen" + depends on INTEL_SCU_IPC + help + Say Y here if you have a Intel MID based touchscreen in + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called intel_mid_touch. + config TOUCHSCREEN_MK712 tristate "ICS MicroClock MK712 touchscreen" help diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 28217e1dcafd..99b353c4e9ae 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI) += ad7879-spi.o obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o +obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o @@ -23,6 +24,8 @@ obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o +obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o +obj-$(CONFIG_TOUCHSCREEN_LPC32XX) += lpc32xx_ts.o obj-$(CONFIG_TOUCHSCREEN_MC13783) += mc13783_ts.o obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c index 5f0221cffef9..a1952fcc083e 100644 --- a/drivers/input/touchscreen/ad7877.c +++ b/drivers/input/touchscreen/ad7877.c @@ -191,13 +191,12 @@ struct ad7877 { struct spi_message msg; struct mutex mutex; - unsigned disabled:1; /* P: mutex */ - unsigned gpio3:1; /* P: mutex */ - unsigned gpio4:1; /* P: mutex */ + bool disabled; /* P: mutex */ + bool gpio3; /* P: mutex */ + bool gpio4; /* P: mutex */ spinlock_t lock; struct timer_list timer; /* P: lock */ - unsigned pending:1; /* P: lock */ /* * DMA (thus cache coherency maintenance) requires the @@ -206,8 +205,8 @@ struct ad7877 { u16 conversion_data[AD7877_NR_SENSE] ____cacheline_aligned; }; -static int gpio3; -module_param(gpio3, int, 0); +static bool gpio3; +module_param(gpio3, bool, 0); MODULE_PARM_DESC(gpio3, "If gpio3 is set to 1 AUX3 acts as GPIO3"); /* @@ -230,6 +229,7 @@ static int ad7877_read(struct spi_device *spi, u16 reg) AD7877_READADD(reg)); req->xfer[0].tx_buf = &req->command; req->xfer[0].len = 2; + req->xfer[0].cs_change = 1; req->xfer[1].rx_buf = &req->sample; req->xfer[1].len = 2; @@ -295,20 +295,25 @@ static int ad7877_read_adc(struct spi_device *spi, unsigned command) req->xfer[0].tx_buf = &req->reset; req->xfer[0].len = 2; + req->xfer[0].cs_change = 1; req->xfer[1].tx_buf = &req->ref_on; req->xfer[1].len = 2; req->xfer[1].delay_usecs = ts->vref_delay_usecs; + req->xfer[1].cs_change = 1; req->xfer[2].tx_buf = &req->command; req->xfer[2].len = 2; req->xfer[2].delay_usecs = ts->vref_delay_usecs; + req->xfer[2].cs_change = 1; req->xfer[3].rx_buf = &req->sample; req->xfer[3].len = 2; + req->xfer[3].cs_change = 1; req->xfer[4].tx_buf = &ts->cmd_crtl2; /*REF OFF*/ req->xfer[4].len = 2; + req->xfer[4].cs_change = 1; req->xfer[5].tx_buf = &ts->cmd_crtl1; /*DEFAULT*/ req->xfer[5].len = 2; @@ -327,7 +332,7 @@ static int ad7877_read_adc(struct spi_device *spi, unsigned command) return status ? : sample; } -static void ad7877_rx(struct ad7877 *ts) +static int ad7877_process_data(struct ad7877 *ts) { struct input_dev *input_dev = ts->input; unsigned Rt; @@ -354,11 +359,25 @@ static void ad7877_rx(struct ad7877 *ts) Rt /= z1; Rt = (Rt + 2047) >> 12; + /* + * Sample found inconsistent, pressure is beyond + * the maximum. Don't report it to user space. + */ + if (Rt > ts->pressure_max) + return -EINVAL; + + if (!timer_pending(&ts->timer)) + input_report_key(input_dev, BTN_TOUCH, 1); + input_report_abs(input_dev, ABS_X, x); input_report_abs(input_dev, ABS_Y, y); input_report_abs(input_dev, ABS_PRESSURE, Rt); input_sync(input_dev); + + return 0; } + + return -EINVAL; } static inline void ad7877_ts_event_release(struct ad7877 *ts) @@ -366,72 +385,56 @@ static inline void ad7877_ts_event_release(struct ad7877 *ts) struct input_dev *input_dev = ts->input; input_report_abs(input_dev, ABS_PRESSURE, 0); + input_report_key(input_dev, BTN_TOUCH, 0); input_sync(input_dev); } static void ad7877_timer(unsigned long handle) { struct ad7877 *ts = (void *)handle; + unsigned long flags; + spin_lock_irqsave(&ts->lock, flags); ad7877_ts_event_release(ts); + spin_unlock_irqrestore(&ts->lock, flags); } static irqreturn_t ad7877_irq(int irq, void *handle) { struct ad7877 *ts = handle; unsigned long flags; - int status; + int error; - /* - * The repeated conversion sequencer controlled by TMR kicked off - * too fast. We ignore the last and process the sample sequence - * currently in the queue. It can't be older than 9.4ms, and we - * need to avoid that ts->msg doesn't get issued twice while in work. - */ + error = spi_sync(ts->spi, &ts->msg); + if (error) { + dev_err(&ts->spi->dev, "spi_sync --> %d\n", error); + goto out; + } spin_lock_irqsave(&ts->lock, flags); - if (!ts->pending) { - ts->pending = 1; - - status = spi_async(ts->spi, &ts->msg); - if (status) - dev_err(&ts->spi->dev, "spi_sync --> %d\n", status); - } + error = ad7877_process_data(ts); + if (!error) + mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT); spin_unlock_irqrestore(&ts->lock, flags); +out: return IRQ_HANDLED; } -static void ad7877_callback(void *_ts) -{ - struct ad7877 *ts = _ts; - - spin_lock_irq(&ts->lock); - - ad7877_rx(ts); - ts->pending = 0; - mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT); - - spin_unlock_irq(&ts->lock); -} - static void ad7877_disable(struct ad7877 *ts) { mutex_lock(&ts->mutex); if (!ts->disabled) { - ts->disabled = 1; + ts->disabled = true; disable_irq(ts->spi->irq); - /* Wait for spi_async callback */ - while (ts->pending) - msleep(1); - if (del_timer_sync(&ts->timer)) ad7877_ts_event_release(ts); } - /* we know the chip's in lowpower mode since we always + /* + * We know the chip's in lowpower mode since we always * leave it that way after every request */ @@ -443,7 +446,7 @@ static void ad7877_enable(struct ad7877 *ts) mutex_lock(&ts->mutex); if (ts->disabled) { - ts->disabled = 0; + ts->disabled = false; enable_irq(ts->spi->irq); } @@ -453,7 +456,7 @@ static void ad7877_enable(struct ad7877 *ts) #define SHOW(name) static ssize_t \ name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \ { \ - struct ad7877 *ts = dev_get_drvdata(dev); \ + struct ad7877 *ts = dev_get_drvdata(dev); \ ssize_t v = ad7877_read_adc(ts->spi, \ AD7877_READ_CHAN(name)); \ if (v < 0) \ @@ -473,7 +476,7 @@ SHOW(temp2) static ssize_t ad7877_disable_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct ad7877 *ts = dev_get_drvdata(dev); + struct ad7877 *ts = dev_get_drvdata(dev); return sprintf(buf, "%u\n", ts->disabled); } @@ -503,7 +506,7 @@ static DEVICE_ATTR(disable, 0664, ad7877_disable_show, ad7877_disable_store); static ssize_t ad7877_dac_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct ad7877 *ts = dev_get_drvdata(dev); + struct ad7877 *ts = dev_get_drvdata(dev); return sprintf(buf, "%u\n", ts->dac); } @@ -533,7 +536,7 @@ static DEVICE_ATTR(dac, 0664, ad7877_dac_show, ad7877_dac_store); static ssize_t ad7877_gpio3_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct ad7877 *ts = dev_get_drvdata(dev); + struct ad7877 *ts = dev_get_drvdata(dev); return sprintf(buf, "%u\n", ts->gpio3); } @@ -564,7 +567,7 @@ static DEVICE_ATTR(gpio3, 0664, ad7877_gpio3_show, ad7877_gpio3_store); static ssize_t ad7877_gpio4_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct ad7877 *ts = dev_get_drvdata(dev); + struct ad7877 *ts = dev_get_drvdata(dev); return sprintf(buf, "%u\n", ts->gpio4); } @@ -597,16 +600,35 @@ static struct attribute *ad7877_attributes[] = { &dev_attr_temp2.attr, &dev_attr_aux1.attr, &dev_attr_aux2.attr, + &dev_attr_aux3.attr, &dev_attr_bat1.attr, &dev_attr_bat2.attr, &dev_attr_disable.attr, &dev_attr_dac.attr, + &dev_attr_gpio3.attr, &dev_attr_gpio4.attr, NULL }; +static mode_t ad7877_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + mode_t mode = attr->mode; + + if (attr == &dev_attr_aux3.attr) { + if (gpio3) + mode = 0; + } else if (attr == &dev_attr_gpio3.attr) { + if (!gpio3) + mode = 0; + } + + return mode; +} + static const struct attribute_group ad7877_attr_group = { - .attrs = ad7877_attributes, + .is_visible = ad7877_attr_is_visible, + .attrs = ad7877_attributes, }; static void ad7877_setup_ts_def_msg(struct spi_device *spi, struct ad7877 *ts) @@ -635,22 +657,25 @@ static void ad7877_setup_ts_def_msg(struct spi_device *spi, struct ad7877 *ts) spi_message_init(m); - m->complete = ad7877_callback; m->context = ts; ts->xfer[0].tx_buf = &ts->cmd_crtl1; ts->xfer[0].len = 2; + ts->xfer[0].cs_change = 1; spi_message_add_tail(&ts->xfer[0], m); ts->xfer[1].tx_buf = &ts->cmd_dummy; /* Send ZERO */ ts->xfer[1].len = 2; + ts->xfer[1].cs_change = 1; spi_message_add_tail(&ts->xfer[1], m); - for (i = 0; i < 11; i++) { + for (i = 0; i < AD7877_NR_SENSE; i++) { ts->xfer[i + 2].rx_buf = &ts->conversion_data[AD7877_SEQ_YPOS + i]; ts->xfer[i + 2].len = 2; + if (i < (AD7877_NR_SENSE - 1)) + ts->xfer[i + 2].cs_change = 1; spi_message_add_tail(&ts->xfer[i + 2], m); } } @@ -718,6 +743,8 @@ static int __devinit ad7877_probe(struct spi_device *spi) input_dev->phys = ts->phys; input_dev->dev.parent = &spi->dev; + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); __set_bit(EV_ABS, input_dev->evbit); __set_bit(ABS_X, input_dev->absbit); __set_bit(ABS_Y, input_dev->absbit); @@ -752,8 +779,9 @@ static int __devinit ad7877_probe(struct spi_device *spi) /* Request AD7877 /DAV GPIO interrupt */ - err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING, - spi->dev.driver->name, ts); + err = request_threaded_irq(spi->irq, NULL, ad7877_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + spi->dev.driver->name, ts); if (err) { dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); goto err_free_mem; @@ -763,20 +791,12 @@ static int __devinit ad7877_probe(struct spi_device *spi) if (err) goto err_free_irq; - err = device_create_file(&spi->dev, - gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3); - if (err) - goto err_remove_attr_group; - err = input_register_device(input_dev); if (err) - goto err_remove_attr; + goto err_remove_attr_group; return 0; -err_remove_attr: - device_remove_file(&spi->dev, - gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3); err_remove_attr_group: sysfs_remove_group(&spi->dev.kobj, &ad7877_attr_group); err_free_irq: @@ -790,11 +810,9 @@ err_free_mem: static int __devexit ad7877_remove(struct spi_device *spi) { - struct ad7877 *ts = dev_get_drvdata(&spi->dev); + struct ad7877 *ts = dev_get_drvdata(&spi->dev); sysfs_remove_group(&spi->dev.kobj, &ad7877_attr_group); - device_remove_file(&spi->dev, - gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3); ad7877_disable(ts); free_irq(ts->spi->irq, ts); diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 16031933a8f6..14ea54b78e46 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -17,9 +17,11 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/types.h> #include <linux/hwmon.h> #include <linux/init.h> #include <linux/err.h> +#include <linux/sched.h> #include <linux/delay.h> #include <linux/input.h> #include <linux/interrupt.h> @@ -52,22 +54,23 @@ * files. */ -#define TS_POLL_DELAY (1 * 1000000) /* ns delay before the first sample */ -#define TS_POLL_PERIOD (5 * 1000000) /* ns delay between samples */ +#define TS_POLL_DELAY 1 /* ms delay before the first sample */ +#define TS_POLL_PERIOD 5 /* ms delay between samples */ /* this driver doesn't aim at the peak continuous sample rate */ #define SAMPLE_BITS (8 /*cmd*/ + 16 /*sample*/ + 2 /* before, after */) struct ts_event { - /* For portability, we can't read 12 bit values using SPI (which - * would make the controller deliver them as native byteorder u16 + /* + * For portability, we can't read 12 bit values using SPI (which + * would make the controller deliver them as native byte order u16 * with msbs zeroed). Instead, we read them as two 8-bit values, * *** WHICH NEED BYTESWAPPING *** and range adjustment. */ u16 x; u16 y; u16 z1, z2; - int ignore; + bool ignore; u8 x_buf[3]; u8 y_buf[3]; }; @@ -110,8 +113,11 @@ struct ads7846 { struct spi_transfer xfer[18]; struct spi_message msg[5]; - struct spi_message *last_msg; - int msg_idx; + int msg_count; + wait_queue_head_t wait; + + bool pendown; + int read_cnt; int read_rep; int last_read; @@ -122,14 +128,10 @@ struct ads7846 { u16 penirq_recheck_delay_usecs; - spinlock_t lock; - struct hrtimer timer; - unsigned pendown:1; /* P: lock */ - unsigned pending:1; /* P: lock */ -// FIXME remove "irq_disabled" - unsigned irq_disabled:1; /* P: lock */ - unsigned disabled:1; - unsigned is_suspended:1; + struct mutex lock; + bool stopped; /* P: lock */ + bool disabled; /* P: lock */ + bool suspended; /* P: lock */ int (*filter)(void *data, int data_idx, int *val); void *filter_data; @@ -165,7 +167,7 @@ struct ads7846 { #define ADS_12_BIT (0 << 3) #define ADS_SER (1 << 2) /* non-differential */ #define ADS_DFR (0 << 2) /* differential */ -#define ADS_PD10_PDOWN (0 << 0) /* lowpower mode + penirq */ +#define ADS_PD10_PDOWN (0 << 0) /* low power mode + penirq */ #define ADS_PD10_ADC_ON (1 << 0) /* ADC on */ #define ADS_PD10_REF_ON (2 << 0) /* vREF on + penirq */ #define ADS_PD10_ALL_ON (3 << 0) /* ADC + vREF on */ @@ -193,6 +195,78 @@ struct ads7846 { #define REF_ON (READ_12BIT_DFR(x, 1, 1)) #define REF_OFF (READ_12BIT_DFR(y, 0, 0)) +/* Must be called with ts->lock held */ +static void ads7846_stop(struct ads7846 *ts) +{ + if (!ts->disabled && !ts->suspended) { + /* Signal IRQ thread to stop polling and disable the handler. */ + ts->stopped = true; + mb(); + wake_up(&ts->wait); + disable_irq(ts->spi->irq); + } +} + +/* Must be called with ts->lock held */ +static void ads7846_restart(struct ads7846 *ts) +{ + if (!ts->disabled && !ts->suspended) { + /* Tell IRQ thread that it may poll the device. */ + ts->stopped = false; + mb(); + enable_irq(ts->spi->irq); + } +} + +/* Must be called with ts->lock held */ +static void __ads7846_disable(struct ads7846 *ts) +{ + ads7846_stop(ts); + regulator_disable(ts->reg); + + /* + * We know the chip's in low power mode since we always + * leave it that way after every request + */ +} + +/* Must be called with ts->lock held */ +static void __ads7846_enable(struct ads7846 *ts) +{ + regulator_enable(ts->reg); + ads7846_restart(ts); +} + +static void ads7846_disable(struct ads7846 *ts) +{ + mutex_lock(&ts->lock); + + if (!ts->disabled) { + + if (!ts->suspended) + __ads7846_disable(ts); + + ts->disabled = true; + } + + mutex_unlock(&ts->lock); +} + +static void ads7846_enable(struct ads7846 *ts) +{ + mutex_lock(&ts->lock); + + if (ts->disabled) { + + ts->disabled = false; + + if (!ts->suspended) + __ads7846_enable(ts); + } + + mutex_unlock(&ts->lock); +} + /*--------------------------------------------------------------------------*/ /* @@ -219,23 +293,15 @@ struct ads7845_ser_req { struct spi_transfer xfer[2]; }; -static void ads7846_enable(struct ads7846 *ts); -static void ads7846_disable(struct ads7846 *ts); - -static int device_suspended(struct device *dev) -{ - struct ads7846 *ts = dev_get_drvdata(dev); - return ts->is_suspended || ts->disabled; -} - static int ads7846_read12_ser(struct device *dev, unsigned command) { - struct spi_device *spi = to_spi_device(dev); - struct ads7846 *ts = dev_get_drvdata(dev); - struct ser_req *req = kzalloc(sizeof *req, GFP_KERNEL); - int status; - int use_internal; + struct spi_device *spi = to_spi_device(dev); + struct ads7846 *ts = dev_get_drvdata(dev); + struct ser_req *req; + int status; + int use_internal; + req = kzalloc(sizeof *req, GFP_KERNEL); if (!req) return -ENOMEM; @@ -282,11 +348,11 @@ static int ads7846_read12_ser(struct device *dev, unsigned command) CS_CHANGE(req->xfer[5]); spi_message_add_tail(&req->xfer[5], &req->msg); - ts->irq_disabled = 1; - disable_irq(spi->irq); + mutex_lock(&ts->lock); + ads7846_stop(ts); status = spi_sync(spi, &req->msg); - ts->irq_disabled = 0; - enable_irq(spi->irq); + ads7846_restart(ts); + mutex_unlock(&ts->lock); if (status == 0) { /* on-wire is a must-ignore bit, a BE12 value, then padding */ @@ -301,11 +367,12 @@ static int ads7846_read12_ser(struct device *dev, unsigned command) static int ads7845_read12_ser(struct device *dev, unsigned command) { - struct spi_device *spi = to_spi_device(dev); - struct ads7846 *ts = dev_get_drvdata(dev); - struct ads7845_ser_req *req = kzalloc(sizeof *req, GFP_KERNEL); - int status; + struct spi_device *spi = to_spi_device(dev); + struct ads7846 *ts = dev_get_drvdata(dev); + struct ads7845_ser_req *req; + int status; + req = kzalloc(sizeof *req, GFP_KERNEL); if (!req) return -ENOMEM; @@ -317,11 +384,11 @@ static int ads7845_read12_ser(struct device *dev, unsigned command) req->xfer[0].len = 3; spi_message_add_tail(&req->xfer[0], &req->msg); - ts->irq_disabled = 1; - disable_irq(spi->irq); + mutex_lock(&ts->lock); + ads7846_stop(ts); status = spi_sync(spi, &req->msg); - ts->irq_disabled = 0; - enable_irq(spi->irq); + ads7846_restart(ts); + mutex_unlock(&ts->lock); if (status == 0) { /* BE12 value, then padding */ @@ -374,6 +441,7 @@ static inline unsigned vaux_adjust(struct ads7846 *ts, ssize_t v) /* external resistors may scale vAUX into 0..vREF */ retval *= ts->vref_mv; retval = retval >> 12; + return retval; } @@ -384,13 +452,13 @@ static inline unsigned vbatt_adjust(struct ads7846 *ts, ssize_t v) /* ads7846 has a resistor ladder to scale this signal down */ if (ts->model == 7846) retval *= 4; + return retval; } SHOW(in0_input, vaux, vaux_adjust) SHOW(in1_input, vbatt, vbatt_adjust) - static struct attribute *ads7846_attributes[] = { &dev_attr_temp0.attr, &dev_attr_temp1.attr, @@ -498,17 +566,12 @@ static inline void ads784x_hwmon_unregister(struct spi_device *spi, } #endif -static int is_pen_down(struct device *dev) -{ - struct ads7846 *ts = dev_get_drvdata(dev); - - return ts->pendown; -} - static ssize_t ads7846_pen_down_show(struct device *dev, struct device_attribute *attr, char *buf) { - return sprintf(buf, "%u\n", is_pen_down(dev)); + struct ads7846 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->pendown); } static DEVICE_ATTR(pen_down, S_IRUGO, ads7846_pen_down_show, NULL); @@ -516,7 +579,7 @@ static DEVICE_ATTR(pen_down, S_IRUGO, ads7846_pen_down_show, NULL); static ssize_t ads7846_disable_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct ads7846 *ts = dev_get_drvdata(dev); + struct ads7846 *ts = dev_get_drvdata(dev); return sprintf(buf, "%u\n", ts->disabled); } @@ -531,15 +594,11 @@ static ssize_t ads7846_disable_store(struct device *dev, if (strict_strtoul(buf, 10, &i)) return -EINVAL; - spin_lock_irq(&ts->lock); - if (i) ads7846_disable(ts); else ads7846_enable(ts); - spin_unlock_irq(&ts->lock); - return count; } @@ -569,23 +628,141 @@ static void null_wait_for_sync(void) { } -/* - * PENIRQ only kicks the timer. The timer only reissues the SPI transfer, - * to retrieve touchscreen status. - * - * The SPI transfer completion callback does the real work. It reports - * touchscreen events and reactivates the timer (or IRQ) as appropriate. - */ +static int ads7846_debounce_filter(void *ads, int data_idx, int *val) +{ + struct ads7846 *ts = ads; + + if (!ts->read_cnt || (abs(ts->last_read - *val) > ts->debounce_tol)) { + /* Start over collecting consistent readings. */ + ts->read_rep = 0; + /* + * Repeat it, if this was the first read or the read + * wasn't consistent enough. + */ + if (ts->read_cnt < ts->debounce_max) { + ts->last_read = *val; + ts->read_cnt++; + return ADS7846_FILTER_REPEAT; + } else { + /* + * Maximum number of debouncing reached and still + * not enough number of consistent readings. Abort + * the whole sample, repeat it in the next sampling + * period. + */ + ts->read_cnt = 0; + return ADS7846_FILTER_IGNORE; + } + } else { + if (++ts->read_rep > ts->debounce_rep) { + /* + * Got a good reading for this coordinate, + * go for the next one. + */ + ts->read_cnt = 0; + ts->read_rep = 0; + return ADS7846_FILTER_OK; + } else { + /* Read more values that are consistent. */ + ts->read_cnt++; + return ADS7846_FILTER_REPEAT; + } + } +} + +static int ads7846_no_filter(void *ads, int data_idx, int *val) +{ + return ADS7846_FILTER_OK; +} + +static int ads7846_get_value(struct ads7846 *ts, struct spi_message *m) +{ + struct spi_transfer *t = + list_entry(m->transfers.prev, struct spi_transfer, transfer_list); + + if (ts->model == 7845) { + return be16_to_cpup((__be16 *)&(((char*)t->rx_buf)[1])) >> 3; + } else { + /* + * adjust: on-wire is a must-ignore bit, a BE12 value, then + * padding; built from two 8 bit values written msb-first. + */ + return be16_to_cpup((__be16 *)t->rx_buf) >> 3; + } +} + +static void ads7846_update_value(struct spi_message *m, int val) +{ + struct spi_transfer *t = + list_entry(m->transfers.prev, struct spi_transfer, transfer_list); + + *(u16 *)t->rx_buf = val; +} + +static void ads7846_read_state(struct ads7846 *ts) +{ + struct ads7846_packet *packet = ts->packet; + struct spi_message *m; + int msg_idx = 0; + int val; + int action; + int error; + + while (msg_idx < ts->msg_count) { + + ts->wait_for_sync(); + + m = &ts->msg[msg_idx]; + error = spi_sync(ts->spi, m); + if (error) { + dev_err(&ts->spi->dev, "spi_async --> %d\n", error); + packet->tc.ignore = true; + return; + } + + /* + * Last message is power down request, no need to convert + * or filter the value. + */ + if (msg_idx < ts->msg_count - 1) { -static void ads7846_rx(void *ads) + val = ads7846_get_value(ts, m); + + action = ts->filter(ts->filter_data, msg_idx, &val); + switch (action) { + case ADS7846_FILTER_REPEAT: + continue; + + case ADS7846_FILTER_IGNORE: + packet->tc.ignore = true; + msg_idx = ts->msg_count - 1; + continue; + + case ADS7846_FILTER_OK: + ads7846_update_value(m, val); + packet->tc.ignore = false; + msg_idx++; + break; + + default: + BUG(); + } + } else { + msg_idx++; + } + } +} + +static void ads7846_report_state(struct ads7846 *ts) { - struct ads7846 *ts = ads; - struct ads7846_packet *packet = ts->packet; - unsigned Rt; - u16 x, y, z1, z2; + struct ads7846_packet *packet = ts->packet; + unsigned int Rt; + u16 x, y, z1, z2; - /* ads7846_rx_val() did in-place conversion (including byteswap) from - * on-the-wire format as part of debouncing to get stable readings. + /* + * ads7846_get_value() does in-place conversion (including byte swap) + * from on-the-wire format as part of debouncing to get stable + * readings. */ if (ts->model == 7845) { x = *(u16 *)packet->tc.x_buf; @@ -623,19 +800,19 @@ static void ads7846_rx(void *ads) Rt = 0; } - /* Sample found inconsistent by debouncing or pressure is beyond + /* + * Sample found inconsistent by debouncing or pressure is beyond * the maximum. Don't report it to user space, repeat at least * once more the measurement */ if (packet->tc.ignore || Rt > ts->pressure_max) { dev_vdbg(&ts->spi->dev, "ignored %d pressure %d\n", packet->tc.ignore, Rt); - hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), - HRTIMER_MODE_REL); return; } - /* Maybe check the pendown state before reporting. This discards + /* + * Maybe check the pendown state before reporting. This discards * false readings when the pen is lifted. */ if (ts->penirq_recheck_delay_usecs) { @@ -644,8 +821,9 @@ static void ads7846_rx(void *ads) Rt = 0; } - /* NOTE: We can't rely on the pressure to determine the pen down - * state, even this controller has a pressure sensor. The pressure + /* + * NOTE: We can't rely on the pressure to determine the pen down + * state, even this controller has a pressure sensor. The pressure * value can fluctuate for quite a while after lifting the pen and * in some cases may not even settle at the expected value. * @@ -655,15 +833,15 @@ static void ads7846_rx(void *ads) if (Rt) { struct input_dev *input = ts->input; + if (ts->swap_xy) + swap(x, y); + if (!ts->pendown) { input_report_key(input, BTN_TOUCH, 1); - ts->pendown = 1; + ts->pendown = true; dev_vdbg(&ts->spi->dev, "DOWN\n"); } - if (ts->swap_xy) - swap(x, y); - input_report_abs(input, ABS_X, x); input_report_abs(input, ABS_Y, y); input_report_abs(input, ABS_PRESSURE, ts->pressure_max - Rt); @@ -671,246 +849,94 @@ static void ads7846_rx(void *ads) input_sync(input); dev_vdbg(&ts->spi->dev, "%4d/%4d/%4d\n", x, y, Rt); } - - hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD), - HRTIMER_MODE_REL); -} - -static int ads7846_debounce(void *ads, int data_idx, int *val) -{ - struct ads7846 *ts = ads; - - if (!ts->read_cnt || (abs(ts->last_read - *val) > ts->debounce_tol)) { - /* Start over collecting consistent readings. */ - ts->read_rep = 0; - /* Repeat it, if this was the first read or the read - * wasn't consistent enough. */ - if (ts->read_cnt < ts->debounce_max) { - ts->last_read = *val; - ts->read_cnt++; - return ADS7846_FILTER_REPEAT; - } else { - /* Maximum number of debouncing reached and still - * not enough number of consistent readings. Abort - * the whole sample, repeat it in the next sampling - * period. - */ - ts->read_cnt = 0; - return ADS7846_FILTER_IGNORE; - } - } else { - if (++ts->read_rep > ts->debounce_rep) { - /* Got a good reading for this coordinate, - * go for the next one. */ - ts->read_cnt = 0; - ts->read_rep = 0; - return ADS7846_FILTER_OK; - } else { - /* Read more values that are consistent. */ - ts->read_cnt++; - return ADS7846_FILTER_REPEAT; - } - } } -static int ads7846_no_filter(void *ads, int data_idx, int *val) +static irqreturn_t ads7846_hard_irq(int irq, void *handle) { - return ADS7846_FILTER_OK; -} - -static void ads7846_rx_val(void *ads) -{ - struct ads7846 *ts = ads; - struct ads7846_packet *packet = ts->packet; - struct spi_message *m; - struct spi_transfer *t; - int val; - int action; - int status; - - m = &ts->msg[ts->msg_idx]; - t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list); - - if (ts->model == 7845) { - val = be16_to_cpup((__be16 *)&(((char*)t->rx_buf)[1])) >> 3; - } else { - /* adjust: on-wire is a must-ignore bit, a BE12 value, then - * padding; built from two 8 bit values written msb-first. - */ - val = be16_to_cpup((__be16 *)t->rx_buf) >> 3; - } + struct ads7846 *ts = handle; - action = ts->filter(ts->filter_data, ts->msg_idx, &val); - switch (action) { - case ADS7846_FILTER_REPEAT: - break; - case ADS7846_FILTER_IGNORE: - packet->tc.ignore = 1; - /* Last message will contain ads7846_rx() as the - * completion function. - */ - m = ts->last_msg; - break; - case ADS7846_FILTER_OK: - *(u16 *)t->rx_buf = val; - packet->tc.ignore = 0; - m = &ts->msg[++ts->msg_idx]; - break; - default: - BUG(); - } - ts->wait_for_sync(); - status = spi_async(ts->spi, m); - if (status) - dev_err(&ts->spi->dev, "spi_async --> %d\n", - status); + return get_pendown_state(ts) ? IRQ_WAKE_THREAD : IRQ_HANDLED; } -static enum hrtimer_restart ads7846_timer(struct hrtimer *handle) -{ - struct ads7846 *ts = container_of(handle, struct ads7846, timer); - int status = 0; - - spin_lock(&ts->lock); - - if (unlikely(!get_pendown_state(ts) || - device_suspended(&ts->spi->dev))) { - if (ts->pendown) { - struct input_dev *input = ts->input; - - input_report_key(input, BTN_TOUCH, 0); - input_report_abs(input, ABS_PRESSURE, 0); - input_sync(input); - - ts->pendown = 0; - dev_vdbg(&ts->spi->dev, "UP\n"); - } - - /* measurement cycle ended */ - if (!device_suspended(&ts->spi->dev)) { - ts->irq_disabled = 0; - enable_irq(ts->spi->irq); - } - ts->pending = 0; - } else { - /* pen is still down, continue with the measurement */ - ts->msg_idx = 0; - ts->wait_for_sync(); - status = spi_async(ts->spi, &ts->msg[0]); - if (status) - dev_err(&ts->spi->dev, "spi_async --> %d\n", status); - } - - spin_unlock(&ts->lock); - return HRTIMER_NORESTART; -} static irqreturn_t ads7846_irq(int irq, void *handle) { struct ads7846 *ts = handle; - unsigned long flags; - - spin_lock_irqsave(&ts->lock, flags); - if (likely(get_pendown_state(ts))) { - if (!ts->irq_disabled) { - /* The ARM do_simple_IRQ() dispatcher doesn't act - * like the other dispatchers: it will report IRQs - * even after they've been disabled. We work around - * that here. (The "generic irq" framework may help...) - */ - ts->irq_disabled = 1; - disable_irq_nosync(ts->spi->irq); - ts->pending = 1; - hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY), - HRTIMER_MODE_REL); - } - } - spin_unlock_irqrestore(&ts->lock, flags); - return IRQ_HANDLED; -} + /* Start with a small delay before checking pendown state */ + msleep(TS_POLL_DELAY); -/*--------------------------------------------------------------------------*/ + while (!ts->stopped && get_pendown_state(ts)) { -/* Must be called with ts->lock held */ -static void ads7846_disable(struct ads7846 *ts) -{ - if (ts->disabled) - return; + /* pen is down, continue with the measurement */ + ads7846_read_state(ts); - ts->disabled = 1; + if (!ts->stopped) + ads7846_report_state(ts); - /* are we waiting for IRQ, or polling? */ - if (!ts->pending) { - ts->irq_disabled = 1; - disable_irq(ts->spi->irq); - } else { - /* the timer will run at least once more, and - * leave everything in a clean state, IRQ disabled - */ - while (ts->pending) { - spin_unlock_irq(&ts->lock); - msleep(1); - spin_lock_irq(&ts->lock); - } + wait_event_timeout(ts->wait, ts->stopped, + msecs_to_jiffies(TS_POLL_PERIOD)); } - regulator_disable(ts->reg); - - /* we know the chip's in lowpower mode since we always - * leave it that way after every request - */ -} + if (ts->pendown) { + struct input_dev *input = ts->input; -/* Must be called with ts->lock held */ -static void ads7846_enable(struct ads7846 *ts) -{ - if (!ts->disabled) - return; + input_report_key(input, BTN_TOUCH, 0); + input_report_abs(input, ABS_PRESSURE, 0); + input_sync(input); - regulator_enable(ts->reg); + ts->pendown = false; + dev_vdbg(&ts->spi->dev, "UP\n"); + } - ts->disabled = 0; - ts->irq_disabled = 0; - enable_irq(ts->spi->irq); + return IRQ_HANDLED; } static int ads7846_suspend(struct spi_device *spi, pm_message_t message) { struct ads7846 *ts = dev_get_drvdata(&spi->dev); - spin_lock_irq(&ts->lock); + mutex_lock(&ts->lock); - ts->is_suspended = 1; - ads7846_disable(ts); + if (!ts->suspended) { - spin_unlock_irq(&ts->lock); + if (!ts->disabled) + __ads7846_disable(ts); - if (device_may_wakeup(&ts->spi->dev)) - enable_irq_wake(ts->spi->irq); + if (device_may_wakeup(&ts->spi->dev)) + enable_irq_wake(ts->spi->irq); - return 0; + ts->suspended = true; + } + + mutex_unlock(&ts->lock); + return 0; } static int ads7846_resume(struct spi_device *spi) { struct ads7846 *ts = dev_get_drvdata(&spi->dev); - if (device_may_wakeup(&ts->spi->dev)) - disable_irq_wake(ts->spi->irq); + mutex_lock(&ts->lock); + + if (ts->suspended) { - spin_lock_irq(&ts->lock); + ts->suspended = false; - ts->is_suspended = 0; - ads7846_enable(ts); + if (device_may_wakeup(&ts->spi->dev)) + disable_irq_wake(ts->spi->irq); - spin_unlock_irq(&ts->lock); + if (!ts->disabled) + __ads7846_enable(ts); + } + + mutex_unlock(&ts->lock); return 0; } -static int __devinit setup_pendown(struct spi_device *spi, struct ads7846 *ts) +static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads7846 *ts) { struct ads7846_platform_data *pdata = spi->dev.platform_data; int err; @@ -932,146 +958,40 @@ static int __devinit setup_pendown(struct spi_device *spi, struct ads7846 *ts) err = gpio_request(pdata->gpio_pendown, "ads7846_pendown"); if (err) { dev_err(&spi->dev, "failed to request pendown GPIO%d\n", - pdata->gpio_pendown); + pdata->gpio_pendown); return err; } ts->gpio_pendown = pdata->gpio_pendown; + return 0; } -static int __devinit ads7846_probe(struct spi_device *spi) +/* + * Set up the transfers to read touchscreen state; this assumes we + * use formula #2 for pressure, not #3. + */ +static void __devinit ads7846_setup_spi_msg(struct ads7846 *ts, + const struct ads7846_platform_data *pdata) { - struct ads7846 *ts; - struct ads7846_packet *packet; - struct input_dev *input_dev; - const struct ads7846_platform_data *pdata = spi->dev.platform_data; - struct spi_message *m; - struct spi_transfer *x; - unsigned long irq_flags; - int vref; - int err; - - if (!spi->irq) { - dev_dbg(&spi->dev, "no IRQ?\n"); - return -ENODEV; - } - - if (!pdata) { - dev_dbg(&spi->dev, "no platform data?\n"); - return -ENODEV; - } - - /* don't exceed max specified sample rate */ - if (spi->max_speed_hz > (125000 * SAMPLE_BITS)) { - dev_dbg(&spi->dev, "f(sample) %d KHz?\n", - (spi->max_speed_hz/SAMPLE_BITS)/1000); - return -EINVAL; - } - - /* We'd set TX wordsize 8 bits and RX wordsize to 13 bits ... except - * that even if the hardware can do that, the SPI controller driver - * may not. So we stick to very-portable 8 bit words, both RX and TX. - */ - spi->bits_per_word = 8; - spi->mode = SPI_MODE_0; - err = spi_setup(spi); - if (err < 0) - return err; - - ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL); - packet = kzalloc(sizeof(struct ads7846_packet), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!ts || !packet || !input_dev) { - err = -ENOMEM; - goto err_free_mem; - } - - dev_set_drvdata(&spi->dev, ts); - - ts->packet = packet; - ts->spi = spi; - ts->input = input_dev; - ts->vref_mv = pdata->vref_mv; - ts->swap_xy = pdata->swap_xy; - - hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - ts->timer.function = ads7846_timer; - - spin_lock_init(&ts->lock); - - ts->model = pdata->model ? : 7846; - ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100; - ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; - ts->pressure_max = pdata->pressure_max ? : ~0; - - if (pdata->filter != NULL) { - if (pdata->filter_init != NULL) { - err = pdata->filter_init(pdata, &ts->filter_data); - if (err < 0) - goto err_free_mem; - } - ts->filter = pdata->filter; - ts->filter_cleanup = pdata->filter_cleanup; - } else if (pdata->debounce_max) { - ts->debounce_max = pdata->debounce_max; - if (ts->debounce_max < 2) - ts->debounce_max = 2; - ts->debounce_tol = pdata->debounce_tol; - ts->debounce_rep = pdata->debounce_rep; - ts->filter = ads7846_debounce; - ts->filter_data = ts; - } else - ts->filter = ads7846_no_filter; - - err = setup_pendown(spi, ts); - if (err) - goto err_cleanup_filter; - - if (pdata->penirq_recheck_delay_usecs) - ts->penirq_recheck_delay_usecs = - pdata->penirq_recheck_delay_usecs; - - ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync; - - snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev)); - snprintf(ts->name, sizeof(ts->name), "ADS%d Touchscreen", ts->model); - - input_dev->name = ts->name; - input_dev->phys = ts->phys; - input_dev->dev.parent = &spi->dev; - - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); - input_set_abs_params(input_dev, ABS_X, - pdata->x_min ? : 0, - pdata->x_max ? : MAX_12BIT, - 0, 0); - input_set_abs_params(input_dev, ABS_Y, - pdata->y_min ? : 0, - pdata->y_max ? : MAX_12BIT, - 0, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, - pdata->pressure_min, pdata->pressure_max, 0, 0); - - vref = pdata->keep_vref_on; + struct spi_message *m = &ts->msg[0]; + struct spi_transfer *x = ts->xfer; + struct ads7846_packet *packet = ts->packet; + int vref = pdata->keep_vref_on; if (ts->model == 7873) { - /* The AD7873 is almost identical to the ADS7846 + /* + * The AD7873 is almost identical to the ADS7846 * keep VREF off during differential/ratiometric - * conversion modes + * conversion modes. */ ts->model = 7846; vref = 0; } - /* set up the transfers to read touchscreen state; this assumes we - * use formula #2 for pressure, not #3. - */ - m = &ts->msg[0]; - x = ts->xfer; - + ts->msg_count = 1; spi_message_init(m); + m->context = ts; if (ts->model == 7845) { packet->read_y_cmd[0] = READ_Y(vref); @@ -1094,7 +1014,8 @@ static int __devinit ads7846_probe(struct spi_device *spi) spi_message_add_tail(x, m); } - /* the first sample after switching drivers can be low quality; + /* + * The first sample after switching drivers can be low quality; * optionally discard it, using a second one after the signals * have had enough time to stabilize. */ @@ -1112,11 +1033,10 @@ static int __devinit ads7846_probe(struct spi_device *spi) spi_message_add_tail(x, m); } - m->complete = ads7846_rx_val; - m->context = ts; - + ts->msg_count++; m++; spi_message_init(m); + m->context = ts; if (ts->model == 7845) { x++; @@ -1156,13 +1076,12 @@ static int __devinit ads7846_probe(struct spi_device *spi) spi_message_add_tail(x, m); } - m->complete = ads7846_rx_val; - m->context = ts; - /* turn y+ off, x- on; we'll use formula #2 */ if (ts->model == 7846) { + ts->msg_count++; m++; spi_message_init(m); + m->context = ts; x++; packet->read_z1 = READ_Z1(vref); @@ -1190,11 +1109,10 @@ static int __devinit ads7846_probe(struct spi_device *spi) spi_message_add_tail(x, m); } - m->complete = ads7846_rx_val; - m->context = ts; - + ts->msg_count++; m++; spi_message_init(m); + m->context = ts; x++; packet->read_z2 = READ_Z2(vref); @@ -1221,14 +1139,13 @@ static int __devinit ads7846_probe(struct spi_device *spi) x->len = 2; spi_message_add_tail(x, m); } - - m->complete = ads7846_rx_val; - m->context = ts; } /* power down */ + ts->msg_count++; m++; spi_message_init(m); + m->context = ts; if (ts->model == 7845) { x++; @@ -1251,11 +1168,119 @@ static int __devinit ads7846_probe(struct spi_device *spi) CS_CHANGE(*x); spi_message_add_tail(x, m); +} - m->complete = ads7846_rx; - m->context = ts; +static int __devinit ads7846_probe(struct spi_device *spi) +{ + struct ads7846 *ts; + struct ads7846_packet *packet; + struct input_dev *input_dev; + struct ads7846_platform_data *pdata = spi->dev.platform_data; + unsigned long irq_flags; + int err; + + if (!spi->irq) { + dev_dbg(&spi->dev, "no IRQ?\n"); + return -ENODEV; + } + + if (!pdata) { + dev_dbg(&spi->dev, "no platform data?\n"); + return -ENODEV; + } + + /* don't exceed max specified sample rate */ + if (spi->max_speed_hz > (125000 * SAMPLE_BITS)) { + dev_dbg(&spi->dev, "f(sample) %d KHz?\n", + (spi->max_speed_hz/SAMPLE_BITS)/1000); + return -EINVAL; + } + + /* We'd set TX word size 8 bits and RX word size to 13 bits ... except + * that even if the hardware can do that, the SPI controller driver + * may not. So we stick to very-portable 8 bit words, both RX and TX. + */ + spi->bits_per_word = 8; + spi->mode = SPI_MODE_0; + err = spi_setup(spi); + if (err < 0) + return err; - ts->last_msg = m; + ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL); + packet = kzalloc(sizeof(struct ads7846_packet), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !packet || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + dev_set_drvdata(&spi->dev, ts); + + ts->packet = packet; + ts->spi = spi; + ts->input = input_dev; + ts->vref_mv = pdata->vref_mv; + ts->swap_xy = pdata->swap_xy; + + mutex_init(&ts->lock); + init_waitqueue_head(&ts->wait); + + ts->model = pdata->model ? : 7846; + ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100; + ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; + ts->pressure_max = pdata->pressure_max ? : ~0; + + if (pdata->filter != NULL) { + if (pdata->filter_init != NULL) { + err = pdata->filter_init(pdata, &ts->filter_data); + if (err < 0) + goto err_free_mem; + } + ts->filter = pdata->filter; + ts->filter_cleanup = pdata->filter_cleanup; + } else if (pdata->debounce_max) { + ts->debounce_max = pdata->debounce_max; + if (ts->debounce_max < 2) + ts->debounce_max = 2; + ts->debounce_tol = pdata->debounce_tol; + ts->debounce_rep = pdata->debounce_rep; + ts->filter = ads7846_debounce_filter; + ts->filter_data = ts; + } else { + ts->filter = ads7846_no_filter; + } + + err = ads7846_setup_pendown(spi, ts); + if (err) + goto err_cleanup_filter; + + if (pdata->penirq_recheck_delay_usecs) + ts->penirq_recheck_delay_usecs = + pdata->penirq_recheck_delay_usecs; + + ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync; + + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev)); + snprintf(ts->name, sizeof(ts->name), "ADS%d Touchscreen", ts->model); + + input_dev->name = ts->name; + input_dev->phys = ts->phys; + input_dev->dev.parent = &spi->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, + pdata->x_min ? : 0, + pdata->x_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_Y, + pdata->y_min ? : 0, + pdata->y_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, + pdata->pressure_min, pdata->pressure_max, 0, 0); + + ads7846_setup_spi_msg(ts, pdata); ts->reg = regulator_get(&spi->dev, "vcc"); if (IS_ERR(ts->reg)) { @@ -1271,16 +1296,17 @@ static int __devinit ads7846_probe(struct spi_device *spi) } irq_flags = pdata->irq_flags ? : IRQF_TRIGGER_FALLING; + irq_flags |= IRQF_ONESHOT; - err = request_irq(spi->irq, ads7846_irq, irq_flags, - spi->dev.driver->name, ts); - + err = request_threaded_irq(spi->irq, ads7846_hard_irq, ads7846_irq, + irq_flags, spi->dev.driver->name, ts); if (err && !pdata->irq_flags) { dev_info(&spi->dev, "trying pin change workaround on irq %d\n", spi->irq); - err = request_irq(spi->irq, ads7846_irq, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - spi->dev.driver->name, ts); + irq_flags |= IRQF_TRIGGER_RISING; + err = request_threaded_irq(spi->irq, + ads7846_hard_irq, ads7846_irq, + irq_flags, spi->dev.driver->name, ts); } if (err) { @@ -1294,7 +1320,8 @@ static int __devinit ads7846_probe(struct spi_device *spi) dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq); - /* take a first sample, leaving nPENIRQ active and vREF off; avoid + /* + * Take a first sample, leaving nPENIRQ active and vREF off; avoid * the touchscreen, in case it's not connected. */ if (ts->model == 7845) @@ -1340,20 +1367,18 @@ static int __devinit ads7846_probe(struct spi_device *spi) static int __devexit ads7846_remove(struct spi_device *spi) { - struct ads7846 *ts = dev_get_drvdata(&spi->dev); + struct ads7846 *ts = dev_get_drvdata(&spi->dev); device_init_wakeup(&spi->dev, false); - ads784x_hwmon_unregister(spi, ts); - input_unregister_device(ts->input); - - ads7846_suspend(spi, PMSG_SUSPEND); - sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group); + ads7846_disable(ts); free_irq(ts->spi->irq, ts); - /* suspend left the IRQ disabled */ - enable_irq(ts->spi->irq); + + input_unregister_device(ts->input); + + ads784x_hwmon_unregister(spi, ts); regulator_disable(ts->reg); regulator_put(ts->reg); @@ -1368,6 +1393,7 @@ static int __devexit ads7846_remove(struct spi_device *spi) kfree(ts); dev_dbg(&spi->dev, "unregistered touchscreen\n"); + return 0; } diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c new file mode 100644 index 000000000000..ccde58602563 --- /dev/null +++ b/drivers/input/touchscreen/bu21013_ts.c @@ -0,0 +1,648 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson + * License terms:GNU General Public License (GPL) version 2 + */ + +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/workqueue.h> +#include <linux/input.h> +#include <linux/input/bu21013.h> +#include <linux/slab.h> + +#define PEN_DOWN_INTR 0 +#define MAX_FINGERS 2 +#define RESET_DELAY 30 +#define PENUP_TIMEOUT (10) +#define DELTA_MIN 16 +#define MASK_BITS 0x03 +#define SHIFT_8 8 +#define SHIFT_2 2 +#define LENGTH_OF_BUFFER 11 +#define I2C_RETRY_COUNT 5 + +#define BU21013_SENSORS_BTN_0_7_REG 0x70 +#define BU21013_SENSORS_BTN_8_15_REG 0x71 +#define BU21013_SENSORS_BTN_16_23_REG 0x72 +#define BU21013_X1_POS_MSB_REG 0x73 +#define BU21013_X1_POS_LSB_REG 0x74 +#define BU21013_Y1_POS_MSB_REG 0x75 +#define BU21013_Y1_POS_LSB_REG 0x76 +#define BU21013_X2_POS_MSB_REG 0x77 +#define BU21013_X2_POS_LSB_REG 0x78 +#define BU21013_Y2_POS_MSB_REG 0x79 +#define BU21013_Y2_POS_LSB_REG 0x7A +#define BU21013_INT_CLR_REG 0xE8 +#define BU21013_INT_MODE_REG 0xE9 +#define BU21013_GAIN_REG 0xEA +#define BU21013_OFFSET_MODE_REG 0xEB +#define BU21013_XY_EDGE_REG 0xEC +#define BU21013_RESET_REG 0xED +#define BU21013_CALIB_REG 0xEE +#define BU21013_DONE_REG 0xEF +#define BU21013_SENSOR_0_7_REG 0xF0 +#define BU21013_SENSOR_8_15_REG 0xF1 +#define BU21013_SENSOR_16_23_REG 0xF2 +#define BU21013_POS_MODE1_REG 0xF3 +#define BU21013_POS_MODE2_REG 0xF4 +#define BU21013_CLK_MODE_REG 0xF5 +#define BU21013_IDLE_REG 0xFA +#define BU21013_FILTER_REG 0xFB +#define BU21013_TH_ON_REG 0xFC +#define BU21013_TH_OFF_REG 0xFD + + +#define BU21013_RESET_ENABLE 0x01 + +#define BU21013_SENSORS_EN_0_7 0x3F +#define BU21013_SENSORS_EN_8_15 0xFC +#define BU21013_SENSORS_EN_16_23 0x1F + +#define BU21013_POS_MODE1_0 0x02 +#define BU21013_POS_MODE1_1 0x04 +#define BU21013_POS_MODE1_2 0x08 + +#define BU21013_POS_MODE2_ZERO 0x01 +#define BU21013_POS_MODE2_AVG1 0x02 +#define BU21013_POS_MODE2_AVG2 0x04 +#define BU21013_POS_MODE2_EN_XY 0x08 +#define BU21013_POS_MODE2_EN_RAW 0x10 +#define BU21013_POS_MODE2_MULTI 0x80 + +#define BU21013_CLK_MODE_DIV 0x01 +#define BU21013_CLK_MODE_EXT 0x02 +#define BU21013_CLK_MODE_CALIB 0x80 + +#define BU21013_IDLET_0 0x01 +#define BU21013_IDLET_1 0x02 +#define BU21013_IDLET_2 0x04 +#define BU21013_IDLET_3 0x08 +#define BU21013_IDLE_INTERMIT_EN 0x10 + +#define BU21013_DELTA_0_6 0x7F +#define BU21013_FILTER_EN 0x80 + +#define BU21013_INT_MODE_LEVEL 0x00 +#define BU21013_INT_MODE_EDGE 0x01 + +#define BU21013_GAIN_0 0x01 +#define BU21013_GAIN_1 0x02 +#define BU21013_GAIN_2 0x04 + +#define BU21013_OFFSET_MODE_DEFAULT 0x00 +#define BU21013_OFFSET_MODE_MOVE 0x01 +#define BU21013_OFFSET_MODE_DISABLE 0x02 + +#define BU21013_TH_ON_0 0x01 +#define BU21013_TH_ON_1 0x02 +#define BU21013_TH_ON_2 0x04 +#define BU21013_TH_ON_3 0x08 +#define BU21013_TH_ON_4 0x10 +#define BU21013_TH_ON_5 0x20 +#define BU21013_TH_ON_6 0x40 +#define BU21013_TH_ON_7 0x80 +#define BU21013_TH_ON_MAX 0xFF + +#define BU21013_TH_OFF_0 0x01 +#define BU21013_TH_OFF_1 0x02 +#define BU21013_TH_OFF_2 0x04 +#define BU21013_TH_OFF_3 0x08 +#define BU21013_TH_OFF_4 0x10 +#define BU21013_TH_OFF_5 0x20 +#define BU21013_TH_OFF_6 0x40 +#define BU21013_TH_OFF_7 0x80 +#define BU21013_TH_OFF_MAX 0xFF + +#define BU21013_X_EDGE_0 0x01 +#define BU21013_X_EDGE_1 0x02 +#define BU21013_X_EDGE_2 0x04 +#define BU21013_X_EDGE_3 0x08 +#define BU21013_Y_EDGE_0 0x10 +#define BU21013_Y_EDGE_1 0x20 +#define BU21013_Y_EDGE_2 0x40 +#define BU21013_Y_EDGE_3 0x80 + +#define BU21013_DONE 0x01 +#define BU21013_NUMBER_OF_X_SENSORS (6) +#define BU21013_NUMBER_OF_Y_SENSORS (11) + +#define DRIVER_TP "bu21013_tp" + +/** + * struct bu21013_ts_data - touch panel data structure + * @client: pointer to the i2c client + * @wait: variable to wait_queue_head_t structure + * @touch_stopped: touch stop flag + * @chip: pointer to the touch panel controller + * @in_dev: pointer to the input device structure + * @intr_pin: interrupt pin value + * + * Touch panel device data structure + */ +struct bu21013_ts_data { + struct i2c_client *client; + wait_queue_head_t wait; + bool touch_stopped; + const struct bu21013_platform_device *chip; + struct input_dev *in_dev; + unsigned int intr_pin; +}; + +/** + * bu21013_read_block_data(): read the touch co-ordinates + * @data: bu21013_ts_data structure pointer + * @buf: byte pointer + * + * Read the touch co-ordinates using i2c read block into buffer + * and returns integer. + */ +static int bu21013_read_block_data(struct bu21013_ts_data *data, u8 *buf) +{ + int ret, i; + + for (i = 0; i < I2C_RETRY_COUNT; i++) { + ret = i2c_smbus_read_i2c_block_data + (data->client, BU21013_SENSORS_BTN_0_7_REG, + LENGTH_OF_BUFFER, buf); + if (ret == LENGTH_OF_BUFFER) + return 0; + } + return -EINVAL; +} + +/** + * bu21013_do_touch_report(): Get the touch co-ordinates + * @data: bu21013_ts_data structure pointer + * + * Get the touch co-ordinates from touch sensor registers and writes + * into device structure and returns integer. + */ +static int bu21013_do_touch_report(struct bu21013_ts_data *data) +{ + u8 buf[LENGTH_OF_BUFFER]; + unsigned int pos_x[2], pos_y[2]; + bool has_x_sensors, has_y_sensors; + int finger_down_count = 0; + int i; + + if (data == NULL) + return -EINVAL; + + if (bu21013_read_block_data(data, buf) < 0) + return -EINVAL; + + has_x_sensors = hweight32(buf[0] & BU21013_SENSORS_EN_0_7); + has_y_sensors = hweight32(((buf[1] & BU21013_SENSORS_EN_8_15) | + ((buf[2] & BU21013_SENSORS_EN_16_23) << SHIFT_8)) >> SHIFT_2); + if (!has_x_sensors || !has_y_sensors) + return 0; + + for (i = 0; i < MAX_FINGERS; i++) { + const u8 *p = &buf[4 * i + 3]; + unsigned int x = p[0] << SHIFT_2 | (p[1] & MASK_BITS); + unsigned int y = p[2] << SHIFT_2 | (p[3] & MASK_BITS); + if (x == 0 || y == 0) + continue; + pos_x[finger_down_count] = x; + pos_y[finger_down_count] = y; + finger_down_count++; + } + + if (finger_down_count) { + if (finger_down_count == 2 && + (abs(pos_x[0] - pos_x[1]) < DELTA_MIN || + abs(pos_y[0] - pos_y[1]) < DELTA_MIN)) { + return 0; + } + + for (i = 0; i < finger_down_count; i++) { + if (data->chip->x_flip) + pos_x[i] = data->chip->touch_x_max - pos_x[i]; + if (data->chip->y_flip) + pos_y[i] = data->chip->touch_y_max - pos_y[i]; + + input_report_abs(data->in_dev, + ABS_MT_POSITION_X, pos_x[i]); + input_report_abs(data->in_dev, + ABS_MT_POSITION_Y, pos_y[i]); + input_mt_sync(data->in_dev); + } + } else + input_mt_sync(data->in_dev); + + input_sync(data->in_dev); + + return 0; +} +/** + * bu21013_gpio_irq() - gpio thread function for touch interrupt + * @irq: irq value + * @device_data: void pointer + * + * This gpio thread function for touch interrupt + * and returns irqreturn_t. + */ +static irqreturn_t bu21013_gpio_irq(int irq, void *device_data) +{ + struct bu21013_ts_data *data = device_data; + struct i2c_client *i2c = data->client; + int retval; + + do { + retval = bu21013_do_touch_report(data); + if (retval < 0) { + dev_err(&i2c->dev, "bu21013_do_touch_report failed\n"); + return IRQ_NONE; + } + + data->intr_pin = data->chip->irq_read_val(); + if (data->intr_pin == PEN_DOWN_INTR) + wait_event_timeout(data->wait, data->touch_stopped, + msecs_to_jiffies(2)); + } while (!data->intr_pin && !data->touch_stopped); + + return IRQ_HANDLED; +} + +/** + * bu21013_init_chip() - power on sequence for the bu21013 controller + * @data: device structure pointer + * + * This function is used to power on + * the bu21013 controller and returns integer. + */ +static int bu21013_init_chip(struct bu21013_ts_data *data) +{ + int retval; + struct i2c_client *i2c = data->client; + + retval = i2c_smbus_write_byte_data(i2c, BU21013_RESET_REG, + BU21013_RESET_ENABLE); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_RESET reg write failed\n"); + return retval; + } + msleep(RESET_DELAY); + + retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_0_7_REG, + BU21013_SENSORS_EN_0_7); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_SENSOR_0_7 reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_8_15_REG, + BU21013_SENSORS_EN_8_15); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_SENSOR_8_15 reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_16_23_REG, + BU21013_SENSORS_EN_16_23); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_SENSOR_16_23 reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_POS_MODE1_REG, + (BU21013_POS_MODE1_0 | BU21013_POS_MODE1_1)); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_POS_MODE1 reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_POS_MODE2_REG, + (BU21013_POS_MODE2_ZERO | BU21013_POS_MODE2_AVG1 | + BU21013_POS_MODE2_AVG2 | BU21013_POS_MODE2_EN_RAW | + BU21013_POS_MODE2_MULTI)); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_POS_MODE2 reg write failed\n"); + return retval; + } + + if (data->chip->ext_clk) + retval = i2c_smbus_write_byte_data(i2c, BU21013_CLK_MODE_REG, + (BU21013_CLK_MODE_EXT | BU21013_CLK_MODE_CALIB)); + else + retval = i2c_smbus_write_byte_data(i2c, BU21013_CLK_MODE_REG, + (BU21013_CLK_MODE_DIV | BU21013_CLK_MODE_CALIB)); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_CLK_MODE reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_IDLE_REG, + (BU21013_IDLET_0 | BU21013_IDLE_INTERMIT_EN)); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_IDLE reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_INT_MODE_REG, + BU21013_INT_MODE_LEVEL); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_INT_MODE reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_FILTER_REG, + (BU21013_DELTA_0_6 | + BU21013_FILTER_EN)); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_FILTER reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_TH_ON_REG, + BU21013_TH_ON_5); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_TH_ON reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_TH_OFF_REG, + BU21013_TH_OFF_4 || BU21013_TH_OFF_3); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_TH_OFF reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_GAIN_REG, + (BU21013_GAIN_0 | BU21013_GAIN_1)); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_GAIN reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_OFFSET_MODE_REG, + BU21013_OFFSET_MODE_DEFAULT); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_OFFSET_MODE reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_XY_EDGE_REG, + (BU21013_X_EDGE_0 | BU21013_X_EDGE_2 | + BU21013_Y_EDGE_1 | BU21013_Y_EDGE_3)); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_XY_EDGE reg write failed\n"); + return retval; + } + + retval = i2c_smbus_write_byte_data(i2c, BU21013_DONE_REG, + BU21013_DONE); + if (retval < 0) { + dev_err(&i2c->dev, "BU21013_REG_DONE reg write failed\n"); + return retval; + } + + return 0; +} + +/** + * bu21013_free_irq() - frees IRQ registered for touchscreen + * @bu21013_data: device structure pointer + * + * This function signals interrupt thread to stop processing and + * frees interrupt. + */ +static void bu21013_free_irq(struct bu21013_ts_data *bu21013_data) +{ + bu21013_data->touch_stopped = true; + wake_up(&bu21013_data->wait); + free_irq(bu21013_data->chip->irq, bu21013_data); +} + +/** + * bu21013_probe() - initializes the i2c-client touchscreen driver + * @client: i2c client structure pointer + * @id: i2c device id pointer + * + * This function used to initializes the i2c-client touchscreen + * driver and returns integer. + */ +static int __devinit bu21013_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct bu21013_ts_data *bu21013_data; + struct input_dev *in_dev; + const struct bu21013_platform_device *pdata = + client->dev.platform_data; + int error; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "i2c smbus byte data not supported\n"); + return -EIO; + } + + if (!pdata) { + dev_err(&client->dev, "platform data not defined\n"); + return -EINVAL; + } + + bu21013_data = kzalloc(sizeof(struct bu21013_ts_data), GFP_KERNEL); + in_dev = input_allocate_device(); + if (!bu21013_data || !in_dev) { + dev_err(&client->dev, "device memory alloc failed\n"); + error = -ENOMEM; + goto err_free_mem; + } + + bu21013_data->in_dev = in_dev; + bu21013_data->chip = pdata; + bu21013_data->client = client; + bu21013_data->touch_stopped = false; + init_waitqueue_head(&bu21013_data->wait); + + /* configure the gpio pins */ + if (pdata->cs_en) { + error = pdata->cs_en(pdata->cs_pin); + if (error < 0) { + dev_err(&client->dev, "chip init failed\n"); + goto err_free_mem; + } + } + + /* configure the touch panel controller */ + error = bu21013_init_chip(bu21013_data); + if (error) { + dev_err(&client->dev, "error in bu21013 config\n"); + goto err_cs_disable; + } + + /* register the device to input subsystem */ + in_dev->name = DRIVER_TP; + in_dev->id.bustype = BUS_I2C; + in_dev->dev.parent = &client->dev; + + __set_bit(EV_SYN, in_dev->evbit); + __set_bit(EV_KEY, in_dev->evbit); + __set_bit(EV_ABS, in_dev->evbit); + + input_set_abs_params(in_dev, ABS_MT_POSITION_X, 0, + pdata->x_max_res, 0, 0); + input_set_abs_params(in_dev, ABS_MT_POSITION_Y, 0, + pdata->y_max_res, 0, 0); + input_set_drvdata(in_dev, bu21013_data); + + error = request_threaded_irq(pdata->irq, NULL, bu21013_gpio_irq, + IRQF_TRIGGER_FALLING | IRQF_SHARED, + DRIVER_TP, bu21013_data); + if (error) { + dev_err(&client->dev, "request irq %d failed\n", pdata->irq); + goto err_cs_disable; + } + + error = input_register_device(in_dev); + if (error) { + dev_err(&client->dev, "failed to register input device\n"); + goto err_free_irq; + } + + device_init_wakeup(&client->dev, pdata->wakeup); + i2c_set_clientdata(client, bu21013_data); + + return 0; + +err_free_irq: + bu21013_free_irq(bu21013_data); +err_cs_disable: + pdata->cs_dis(pdata->cs_pin); +err_free_mem: + input_free_device(bu21013_data->in_dev); + kfree(bu21013_data); + + return error; +} +/** + * bu21013_remove() - removes the i2c-client touchscreen driver + * @client: i2c client structure pointer + * + * This function uses to remove the i2c-client + * touchscreen driver and returns integer. + */ +static int __devexit bu21013_remove(struct i2c_client *client) +{ + struct bu21013_ts_data *bu21013_data = i2c_get_clientdata(client); + + bu21013_free_irq(bu21013_data); + + bu21013_data->chip->cs_dis(bu21013_data->chip->cs_pin); + + input_unregister_device(bu21013_data->in_dev); + kfree(bu21013_data); + + device_init_wakeup(&client->dev, false); + + return 0; +} + +#ifdef CONFIG_PM +/** + * bu21013_suspend() - suspend the touch screen controller + * @dev: pointer to device structure + * + * This function is used to suspend the + * touch panel controller and returns integer + */ +static int bu21013_suspend(struct device *dev) +{ + struct bu21013_ts_data *bu21013_data = dev_get_drvdata(dev); + struct i2c_client *client = bu21013_data->client; + + bu21013_data->touch_stopped = true; + if (device_may_wakeup(&client->dev)) + enable_irq_wake(bu21013_data->chip->irq); + else + disable_irq(bu21013_data->chip->irq); + + return 0; +} + +/** + * bu21013_resume() - resume the touch screen controller + * @dev: pointer to device structure + * + * This function is used to resume the touch panel + * controller and returns integer. + */ +static int bu21013_resume(struct device *dev) +{ + struct bu21013_ts_data *bu21013_data = dev_get_drvdata(dev); + struct i2c_client *client = bu21013_data->client; + int retval; + + retval = bu21013_init_chip(bu21013_data); + if (retval < 0) { + dev_err(&client->dev, "bu21013 controller config failed\n"); + return retval; + } + + bu21013_data->touch_stopped = false; + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(bu21013_data->chip->irq); + else + enable_irq(bu21013_data->chip->irq); + + return 0; +} + +static const struct dev_pm_ops bu21013_dev_pm_ops = { + .suspend = bu21013_suspend, + .resume = bu21013_resume, +}; +#endif + +static const struct i2c_device_id bu21013_id[] = { + { DRIVER_TP, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bu21013_id); + +static struct i2c_driver bu21013_driver = { + .driver = { + .name = DRIVER_TP, + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &bu21013_dev_pm_ops, +#endif + }, + .probe = bu21013_probe, + .remove = __devexit_p(bu21013_remove), + .id_table = bu21013_id, +}; + +/** + * bu21013_init() - initializes the bu21013 touchscreen driver + * + * This function used to initializes the bu21013 + * touchscreen driver and returns integer. + */ +static int __init bu21013_init(void) +{ + return i2c_add_driver(&bu21013_driver); +} + +/** + * bu21013_exit() - de-initializes the bu21013 touchscreen driver + * + * This function uses to de-initializes the bu21013 + * touchscreen driver and returns none. + */ +static void __exit bu21013_exit(void) +{ + i2c_del_driver(&bu21013_driver); +} + +module_init(bu21013_init); +module_exit(bu21013_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Naveen Kumar G <naveen.gaddipati@stericsson.com>"); +MODULE_DESCRIPTION("bu21013 touch screen controller driver"); diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c index 5ec0946938fe..d0c3a7229adf 100644 --- a/drivers/input/touchscreen/cy8ctmg110_ts.c +++ b/drivers/input/touchscreen/cy8ctmg110_ts.c @@ -206,9 +206,9 @@ static int __devinit cy8ctmg110_probe(struct i2c_client *client, input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); input_set_abs_params(input_dev, ABS_X, - CY8CTMG110_X_MIN, CY8CTMG110_X_MAX, 0, 0); + CY8CTMG110_X_MIN, CY8CTMG110_X_MAX, 4, 0); input_set_abs_params(input_dev, ABS_Y, - CY8CTMG110_Y_MIN, CY8CTMG110_Y_MAX, 0, 0); + CY8CTMG110_Y_MIN, CY8CTMG110_Y_MAX, 4, 0); if (ts->reset_pin) { err = gpio_request(ts->reset_pin, NULL); diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c index a89700e7ace4..498bd62af09a 100644 --- a/drivers/input/touchscreen/hp680_ts_input.c +++ b/drivers/input/touchscreen/hp680_ts_input.c @@ -107,8 +107,7 @@ static int __init hp680_ts_init(void) return 0; fail2: free_irq(HP680_TS_IRQ, NULL); - cancel_delayed_work(&work); - flush_scheduled_work(); + cancel_delayed_work_sync(&work); fail1: input_free_device(hp680_ts_dev); return err; } @@ -116,8 +115,7 @@ static int __init hp680_ts_init(void) static void __exit hp680_ts_exit(void) { free_irq(HP680_TS_IRQ, NULL); - cancel_delayed_work(&work); - flush_scheduled_work(); + cancel_delayed_work_sync(&work); input_unregister_device(hp680_ts_dev); } diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c new file mode 100644 index 000000000000..c0307b22d86f --- /dev/null +++ b/drivers/input/touchscreen/intel-mid-touch.c @@ -0,0 +1,687 @@ +/* + * Intel MID Resistive Touch Screen Driver + * + * Copyright (C) 2008 Intel Corp + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * Questions/Comments/Bug fixes to Sreedhara (sreedhara.ds@intel.com) + * Ramesh Agarwal (ramesh.agarwal@intel.com) + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * TODO: + * review conversion of r/m/w sequences + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <linux/param.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <asm/intel_scu_ipc.h> + +/* PMIC Interrupt registers */ +#define PMIC_REG_ID1 0x00 /* PMIC ID1 register */ + +/* PMIC Interrupt registers */ +#define PMIC_REG_INT 0x04 /* PMIC interrupt register */ +#define PMIC_REG_MINT 0x05 /* PMIC interrupt mask register */ + +/* ADC Interrupt registers */ +#define PMIC_REG_ADCINT 0x5F /* ADC interrupt register */ +#define PMIC_REG_MADCINT 0x60 /* ADC interrupt mask register */ + +/* ADC Control registers */ +#define PMIC_REG_ADCCNTL1 0x61 /* ADC control register */ + +/* ADC Channel Selection registers */ +#define PMICADDR0 0xA4 +#define END_OF_CHANNEL 0x1F + +/* ADC Result register */ +#define PMIC_REG_ADCSNS0H 0x64 + +/* ADC channels for touch screen */ +#define MRST_TS_CHAN10 0xA /* Touch screen X+ connection */ +#define MRST_TS_CHAN11 0xB /* Touch screen X- connection */ +#define MRST_TS_CHAN12 0xC /* Touch screen Y+ connection */ +#define MRST_TS_CHAN13 0xD /* Touch screen Y- connection */ + +/* Touch screen channel BIAS constants */ +#define MRST_XBIAS 0x20 +#define MRST_YBIAS 0x40 +#define MRST_ZBIAS 0x80 + +/* Touch screen coordinates */ +#define MRST_X_MIN 10 +#define MRST_X_MAX 1024 +#define MRST_X_FUZZ 5 +#define MRST_Y_MIN 10 +#define MRST_Y_MAX 1024 +#define MRST_Y_FUZZ 5 +#define MRST_PRESSURE_MIN 0 +#define MRST_PRESSURE_NOMINAL 50 +#define MRST_PRESSURE_MAX 100 + +#define WAIT_ADC_COMPLETION 10 /* msec */ + +/* PMIC ADC round robin delays */ +#define ADC_LOOP_DELAY0 0x0 /* Continuous loop */ +#define ADC_LOOP_DELAY1 0x1 /* 4.5 ms approximate */ + +/* PMIC Vendor Identifiers */ +#define PMIC_VENDOR_FS 0 /* PMIC vendor FreeScale */ +#define PMIC_VENDOR_MAXIM 1 /* PMIC vendor MAXIM */ +#define PMIC_VENDOR_NEC 2 /* PMIC vendor NEC */ +#define MRSTOUCH_MAX_CHANNELS 32 /* Maximum ADC channels */ + +/* Touch screen device structure */ +struct mrstouch_dev { + struct device *dev; /* device associated with touch screen */ + struct input_dev *input; + char phys[32]; + u16 asr; /* Address selection register */ + int irq; + unsigned int vendor; /* PMIC vendor */ + unsigned int rev; /* PMIC revision */ + + int (*read_prepare)(struct mrstouch_dev *tsdev); + int (*read)(struct mrstouch_dev *tsdev, u16 *x, u16 *y, u16 *z); + int (*read_finish)(struct mrstouch_dev *tsdev); +}; + + +/*************************** NEC and Maxim Interface ************************/ + +static int mrstouch_nec_adc_read_prepare(struct mrstouch_dev *tsdev) +{ + return intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0, 0x20); +} + +/* + * Enables PENDET interrupt. + */ +static int mrstouch_nec_adc_read_finish(struct mrstouch_dev *tsdev) +{ + int err; + + err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x20, 0x20); + if (!err) + err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, 0, 0x05); + + return err; +} + +/* + * Reads PMIC ADC touch screen result + * Reads ADC storage registers for higher 7 and lower 3 bits and + * converts the two readings into a single value and turns off gain bit + */ +static int mrstouch_ts_chan_read(u16 offset, u16 chan, u16 *vp, u16 *vm) +{ + int err; + u16 result; + u32 res; + + result = PMIC_REG_ADCSNS0H + offset; + + if (chan == MRST_TS_CHAN12) + result += 4; + + err = intel_scu_ipc_ioread32(result, &res); + if (err) + return err; + + /* Mash the bits up */ + + *vp = (res & 0xFF) << 3; /* Highest 7 bits */ + *vp |= (res >> 8) & 0x07; /* Lower 3 bits */ + *vp &= 0x3FF; + + res >>= 16; + + *vm = (res & 0xFF) << 3; /* Highest 7 bits */ + *vm |= (res >> 8) & 0x07; /* Lower 3 bits */ + *vm &= 0x3FF; + + return 0; +} + +/* + * Enables X, Y and Z bias values + * Enables YPYM for X channels and XPXM for Y channels + */ +static int mrstouch_ts_bias_set(uint offset, uint bias) +{ + int count; + u16 chan, start; + u16 reg[4]; + u8 data[4]; + + chan = PMICADDR0 + offset; + start = MRST_TS_CHAN10; + + for (count = 0; count <= 3; count++) { + reg[count] = chan++; + data[count] = bias | (start + count); + } + + return intel_scu_ipc_writev(reg, data, 4); +} + +/* To read touch screen channel values */ +static int mrstouch_nec_adc_read(struct mrstouch_dev *tsdev, + u16 *x, u16 *y, u16 *z) +{ + int err; + u16 xm, ym, zm; + + /* configure Y bias for X channels */ + err = mrstouch_ts_bias_set(tsdev->asr, MRST_YBIAS); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + /* read x+ and x- channels */ + err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, x, &xm); + if (err) + goto ipc_error; + + /* configure x bias for y channels */ + err = mrstouch_ts_bias_set(tsdev->asr, MRST_XBIAS); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + /* read y+ and y- channels */ + err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN12, y, &ym); + if (err) + goto ipc_error; + + /* configure z bias for x and y channels */ + err = mrstouch_ts_bias_set(tsdev->asr, MRST_ZBIAS); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + /* read z+ and z- channels */ + err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, z, &zm); + if (err) + goto ipc_error; + + return 0; + +ipc_error: + dev_err(tsdev->dev, "ipc error during adc read\n"); + return err; +} + + +/*************************** Freescale Interface ************************/ + +static int mrstouch_fs_adc_read_prepare(struct mrstouch_dev *tsdev) +{ + int err, count; + u16 chan; + u16 reg[5]; + u8 data[5]; + + /* Stop the ADC */ + err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x00, 0x02); + if (err) + goto ipc_error; + + chan = PMICADDR0 + tsdev->asr; + + /* Set X BIAS */ + for (count = 0; count <= 3; count++) { + reg[count] = chan++; + data[count] = 0x2A; + } + reg[count] = chan++; /* Dummy */ + data[count] = 0; + + err = intel_scu_ipc_writev(reg, data, 5); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + /* Set Y BIAS */ + for (count = 0; count <= 3; count++) { + reg[count] = chan++; + data[count] = 0x4A; + } + reg[count] = chan++; /* Dummy */ + data[count] = 0; + + err = intel_scu_ipc_writev(reg, data, 5); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + /* Set Z BIAS */ + err = intel_scu_ipc_iowrite32(chan + 2, 0x8A8A8A8A); + if (err) + goto ipc_error; + + msleep(WAIT_ADC_COMPLETION); + + return 0; + +ipc_error: + dev_err(tsdev->dev, "ipc error during %s\n", __func__); + return err; +} + +static int mrstouch_fs_adc_read(struct mrstouch_dev *tsdev, + u16 *x, u16 *y, u16 *z) +{ + int err; + u16 result; + u16 reg[4]; + u8 data[4]; + + result = PMIC_REG_ADCSNS0H + tsdev->asr; + + reg[0] = result + 4; + reg[1] = result + 5; + reg[2] = result + 16; + reg[3] = result + 17; + + err = intel_scu_ipc_readv(reg, data, 4); + if (err) + goto ipc_error; + + *x = data[0] << 3; /* Higher 7 bits */ + *x |= data[1] & 0x7; /* Lower 3 bits */ + *x &= 0x3FF; + + *y = data[2] << 3; /* Higher 7 bits */ + *y |= data[3] & 0x7; /* Lower 3 bits */ + *y &= 0x3FF; + + /* Read Z value */ + reg[0] = result + 28; + reg[1] = result + 29; + + err = intel_scu_ipc_readv(reg, data, 4); + if (err) + goto ipc_error; + + *z = data[0] << 3; /* Higher 7 bits */ + *z |= data[1] & 0x7; /* Lower 3 bits */ + *z &= 0x3FF; + + return 0; + +ipc_error: + dev_err(tsdev->dev, "ipc error during %s\n", __func__); + return err; +} + +static int mrstouch_fs_adc_read_finish(struct mrstouch_dev *tsdev) +{ + int err, count; + u16 chan; + u16 reg[5]; + u8 data[5]; + + /* Clear all TS channels */ + chan = PMICADDR0 + tsdev->asr; + for (count = 0; count <= 4; count++) { + reg[count] = chan++; + data[count] = 0; + } + err = intel_scu_ipc_writev(reg, data, 5); + if (err) + goto ipc_error; + + for (count = 0; count <= 4; count++) { + reg[count] = chan++; + data[count] = 0; + } + err = intel_scu_ipc_writev(reg, data, 5); + if (err) + goto ipc_error; + + err = intel_scu_ipc_iowrite32(chan + 2, 0x00000000); + if (err) + goto ipc_error; + + /* Start ADC */ + err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x02, 0x02); + if (err) + goto ipc_error; + + return 0; + +ipc_error: + dev_err(tsdev->dev, "ipc error during %s\n", __func__); + return err; +} + +static void mrstouch_report_event(struct input_dev *input, + unsigned int x, unsigned int y, unsigned int z) +{ + if (z > MRST_PRESSURE_NOMINAL) { + /* Pen touched, report button touch and coordinates */ + input_report_key(input, BTN_TOUCH, 1); + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + } else { + input_report_key(input, BTN_TOUCH, 0); + } + + input_report_abs(input, ABS_PRESSURE, z); + input_sync(input); +} + +/* PENDET interrupt handler */ +static irqreturn_t mrstouch_pendet_irq(int irq, void *dev_id) +{ + struct mrstouch_dev *tsdev = dev_id; + u16 x, y, z; + + /* + * Should we lower thread priority? Probably not, since we are + * not spinning but sleeping... + */ + + if (tsdev->read_prepare(tsdev)) + goto out; + + do { + if (tsdev->read(tsdev, &x, &y, &z)) + break; + + mrstouch_report_event(tsdev->input, x, y, z); + } while (z > MRST_PRESSURE_NOMINAL); + + tsdev->read_finish(tsdev); + +out: + return IRQ_HANDLED; +} + +/* Utility to read PMIC ID */ +static int __devinit mrstouch_read_pmic_id(uint *vendor, uint *rev) +{ + int err; + u8 r; + + err = intel_scu_ipc_ioread8(PMIC_REG_ID1, &r); + if (err) + return err; + + *vendor = r & 0x7; + *rev = (r >> 3) & 0x7; + + return 0; +} + +/* + * Parse ADC channels to find end of the channel configured by other ADC user + * NEC and MAXIM requires 4 channels and FreeScale needs 18 channels + */ +static int __devinit mrstouch_chan_parse(struct mrstouch_dev *tsdev) +{ + int err, i, found; + u8 r8; + + found = -1; + + for (i = 0; i < MRSTOUCH_MAX_CHANNELS; i++) { + if (found >= 0) + break; + + err = intel_scu_ipc_ioread8(PMICADDR0 + i, &r8); + if (err) + return err; + + if (r8 == END_OF_CHANNEL) { + found = i; + break; + } + } + if (found < 0) + return 0; + + if (tsdev->vendor == PMIC_VENDOR_FS) { + if (found && found > (MRSTOUCH_MAX_CHANNELS - 18)) + return -ENOSPC; + } else { + if (found && found > (MRSTOUCH_MAX_CHANNELS - 4)) + return -ENOSPC; + } + return found; +} + + +/* + * Writes touch screen channels to ADC address selection registers + */ +static int __devinit mrstouch_ts_chan_set(uint offset) +{ + u16 chan; + + int ret, count; + + chan = PMICADDR0 + offset; + for (count = 0; count <= 3; count++) { + ret = intel_scu_ipc_iowrite8(chan++, MRST_TS_CHAN10 + count); + if (ret) + return ret; + } + return intel_scu_ipc_iowrite8(chan++, END_OF_CHANNEL); +} + +/* Initialize ADC */ +static int __devinit mrstouch_adc_init(struct mrstouch_dev *tsdev) +{ + int err, start; + u8 ra, rm; + + err = mrstouch_read_pmic_id(&tsdev->vendor, &tsdev->rev); + if (err) { + dev_err(tsdev->dev, "Unable to read PMIC id\n"); + return err; + } + + switch (tsdev->vendor) { + case PMIC_VENDOR_NEC: + case PMIC_VENDOR_MAXIM: + tsdev->read_prepare = mrstouch_nec_adc_read_prepare; + tsdev->read = mrstouch_nec_adc_read; + tsdev->read_finish = mrstouch_nec_adc_read_finish; + break; + + case PMIC_VENDOR_FS: + tsdev->read_prepare = mrstouch_fs_adc_read_prepare; + tsdev->read = mrstouch_fs_adc_read; + tsdev->read_finish = mrstouch_fs_adc_read_finish; + break; + + default: + dev_err(tsdev->dev, + "Unsupported touchscreen: %d\n", tsdev->vendor); + return -ENXIO; + } + + start = mrstouch_chan_parse(tsdev); + if (start < 0) { + dev_err(tsdev->dev, "Unable to parse channels\n"); + return start; + } + + tsdev->asr = start; + + /* + * ADC power on, start, enable PENDET and set loop delay + * ADC loop delay is set to 4.5 ms approximately + * Loop delay more than this results in jitter in adc readings + * Setting loop delay to 0 (continous loop) in MAXIM stops PENDET + * interrupt generation sometimes. + */ + + if (tsdev->vendor == PMIC_VENDOR_FS) { + ra = 0xE0 | ADC_LOOP_DELAY0; + rm = 0x5; + } else { + /* NEC and MAXIm not consistent with loop delay 0 */ + ra = 0xE0 | ADC_LOOP_DELAY1; + rm = 0x0; + + /* configure touch screen channels */ + err = mrstouch_ts_chan_set(tsdev->asr); + if (err) + return err; + } + + err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, ra, 0xE7); + if (err) + return err; + + err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, rm, 0x03); + if (err) + return err; + + return 0; +} + + +/* Probe function for touch screen driver */ +static int __devinit mrstouch_probe(struct platform_device *pdev) +{ + struct mrstouch_dev *tsdev; + struct input_dev *input; + int err; + int irq; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no interrupt assigned\n"); + return -EINVAL; + } + + tsdev = kzalloc(sizeof(struct mrstouch_dev), GFP_KERNEL); + input = input_allocate_device(); + if (!tsdev || !input) { + dev_err(&pdev->dev, "unable to allocate memory\n"); + err = -ENOMEM; + goto err_free_mem; + } + + tsdev->dev = &pdev->dev; + tsdev->input = input; + tsdev->irq = irq; + + snprintf(tsdev->phys, sizeof(tsdev->phys), + "%s/input0", dev_name(tsdev->dev)); + + err = mrstouch_adc_init(tsdev); + if (err) { + dev_err(&pdev->dev, "ADC initialization failed\n"); + goto err_free_mem; + } + + input->name = "mrst_touchscreen"; + input->phys = tsdev->phys; + input->dev.parent = tsdev->dev; + + input->id.vendor = tsdev->vendor; + input->id.version = tsdev->rev; + + input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(tsdev->input, ABS_X, + MRST_X_MIN, MRST_X_MAX, MRST_X_FUZZ, 0); + input_set_abs_params(tsdev->input, ABS_Y, + MRST_Y_MIN, MRST_Y_MAX, MRST_Y_FUZZ, 0); + input_set_abs_params(tsdev->input, ABS_PRESSURE, + MRST_PRESSURE_MIN, MRST_PRESSURE_MAX, 0, 0); + + err = request_threaded_irq(tsdev->irq, NULL, mrstouch_pendet_irq, + 0, "mrstouch", tsdev); + if (err) { + dev_err(tsdev->dev, "unable to allocate irq\n"); + goto err_free_mem; + } + + err = input_register_device(tsdev->input); + if (err) { + dev_err(tsdev->dev, "unable to register input device\n"); + goto err_free_irq; + } + + platform_set_drvdata(pdev, tsdev); + return 0; + +err_free_irq: + free_irq(tsdev->irq, tsdev); +err_free_mem: + input_free_device(input); + kfree(tsdev); + return err; +} + +static int __devexit mrstouch_remove(struct platform_device *pdev) +{ + struct mrstouch_dev *tsdev = platform_get_drvdata(pdev); + + free_irq(tsdev->irq, tsdev); + input_unregister_device(tsdev->input); + kfree(tsdev); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver mrstouch_driver = { + .driver = { + .name = "pmic_touch", + .owner = THIS_MODULE, + }, + .probe = mrstouch_probe, + .remove = __devexit_p(mrstouch_remove), +}; + +static int __init mrstouch_init(void) +{ + return platform_driver_register(&mrstouch_driver); +} +module_init(mrstouch_init); + +static void __exit mrstouch_exit(void) +{ + platform_driver_unregister(&mrstouch_driver); +} +module_exit(mrstouch_exit); + +MODULE_AUTHOR("Sreedhara Murthy. D.S, sreedhara.ds@intel.com"); +MODULE_DESCRIPTION("Intel Moorestown Resistive Touch Screen Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c new file mode 100644 index 000000000000..dcf803f5a1f7 --- /dev/null +++ b/drivers/input/touchscreen/lpc32xx_ts.c @@ -0,0 +1,411 @@ +/* + * LPC32xx built-in touchscreen driver + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/slab.h> + +/* + * Touchscreen controller register offsets + */ +#define LPC32XX_TSC_STAT 0x00 +#define LPC32XX_TSC_SEL 0x04 +#define LPC32XX_TSC_CON 0x08 +#define LPC32XX_TSC_FIFO 0x0C +#define LPC32XX_TSC_DTR 0x10 +#define LPC32XX_TSC_RTR 0x14 +#define LPC32XX_TSC_UTR 0x18 +#define LPC32XX_TSC_TTR 0x1C +#define LPC32XX_TSC_DXP 0x20 +#define LPC32XX_TSC_MIN_X 0x24 +#define LPC32XX_TSC_MAX_X 0x28 +#define LPC32XX_TSC_MIN_Y 0x2C +#define LPC32XX_TSC_MAX_Y 0x30 +#define LPC32XX_TSC_AUX_UTR 0x34 +#define LPC32XX_TSC_AUX_MIN 0x38 +#define LPC32XX_TSC_AUX_MAX 0x3C + +#define LPC32XX_TSC_STAT_FIFO_OVRRN (1 << 8) +#define LPC32XX_TSC_STAT_FIFO_EMPTY (1 << 7) + +#define LPC32XX_TSC_SEL_DEFVAL 0x0284 + +#define LPC32XX_TSC_ADCCON_IRQ_TO_FIFO_4 (0x1 << 11) +#define LPC32XX_TSC_ADCCON_X_SAMPLE_SIZE(s) ((10 - (s)) << 7) +#define LPC32XX_TSC_ADCCON_Y_SAMPLE_SIZE(s) ((10 - (s)) << 4) +#define LPC32XX_TSC_ADCCON_POWER_UP (1 << 2) +#define LPC32XX_TSC_ADCCON_AUTO_EN (1 << 0) + +#define LPC32XX_TSC_FIFO_TS_P_LEVEL (1 << 31) +#define LPC32XX_TSC_FIFO_NORMALIZE_X_VAL(x) (((x) & 0x03FF0000) >> 16) +#define LPC32XX_TSC_FIFO_NORMALIZE_Y_VAL(y) ((y) & 0x000003FF) + +#define LPC32XX_TSC_ADCDAT_VALUE_MASK 0x000003FF + +#define LPC32XX_TSC_MIN_XY_VAL 0x0 +#define LPC32XX_TSC_MAX_XY_VAL 0x3FF + +#define MOD_NAME "ts-lpc32xx" + +#define tsc_readl(dev, reg) \ + __raw_readl((dev)->tsc_base + (reg)) +#define tsc_writel(dev, reg, val) \ + __raw_writel((val), (dev)->tsc_base + (reg)) + +struct lpc32xx_tsc { + struct input_dev *dev; + void __iomem *tsc_base; + int irq; + struct clk *clk; +}; + +static void lpc32xx_fifo_clear(struct lpc32xx_tsc *tsc) +{ + while (!(tsc_readl(tsc, LPC32XX_TSC_STAT) & + LPC32XX_TSC_STAT_FIFO_EMPTY)) + tsc_readl(tsc, LPC32XX_TSC_FIFO); +} + +static irqreturn_t lpc32xx_ts_interrupt(int irq, void *dev_id) +{ + u32 tmp, rv[4], xs[4], ys[4]; + int idx; + struct lpc32xx_tsc *tsc = dev_id; + struct input_dev *input = tsc->dev; + + tmp = tsc_readl(tsc, LPC32XX_TSC_STAT); + + if (tmp & LPC32XX_TSC_STAT_FIFO_OVRRN) { + /* FIFO overflow - throw away samples */ + lpc32xx_fifo_clear(tsc); + return IRQ_HANDLED; + } + + /* + * Gather and normalize 4 samples. Pen-up events may have less + * than 4 samples, but its ok to pop 4 and let the last sample + * pen status check drop the samples. + */ + idx = 0; + while (idx < 4 && + !(tsc_readl(tsc, LPC32XX_TSC_STAT) & + LPC32XX_TSC_STAT_FIFO_EMPTY)) { + tmp = tsc_readl(tsc, LPC32XX_TSC_FIFO); + xs[idx] = LPC32XX_TSC_ADCDAT_VALUE_MASK - + LPC32XX_TSC_FIFO_NORMALIZE_X_VAL(tmp); + ys[idx] = LPC32XX_TSC_ADCDAT_VALUE_MASK - + LPC32XX_TSC_FIFO_NORMALIZE_Y_VAL(tmp); + rv[idx] = tmp; + idx++; + } + + /* Data is only valid if pen is still down in last sample */ + if (!(rv[3] & LPC32XX_TSC_FIFO_TS_P_LEVEL) && idx == 4) { + /* Use average of 2nd and 3rd sample for position */ + input_report_abs(input, ABS_X, (xs[1] + xs[2]) / 2); + input_report_abs(input, ABS_Y, (ys[1] + ys[2]) / 2); + input_report_key(input, BTN_TOUCH, 1); + } else { + input_report_key(input, BTN_TOUCH, 0); + } + + input_sync(input); + + return IRQ_HANDLED; +} + +static void lpc32xx_stop_tsc(struct lpc32xx_tsc *tsc) +{ + /* Disable auto mode */ + tsc_writel(tsc, LPC32XX_TSC_CON, + tsc_readl(tsc, LPC32XX_TSC_CON) & + ~LPC32XX_TSC_ADCCON_AUTO_EN); + + clk_disable(tsc->clk); +} + +static void lpc32xx_setup_tsc(struct lpc32xx_tsc *tsc) +{ + u32 tmp; + + clk_enable(tsc->clk); + + tmp = tsc_readl(tsc, LPC32XX_TSC_CON) & ~LPC32XX_TSC_ADCCON_POWER_UP; + + /* Set the TSC FIFO depth to 4 samples @ 10-bits per sample (max) */ + tmp = LPC32XX_TSC_ADCCON_IRQ_TO_FIFO_4 | + LPC32XX_TSC_ADCCON_X_SAMPLE_SIZE(10) | + LPC32XX_TSC_ADCCON_Y_SAMPLE_SIZE(10); + tsc_writel(tsc, LPC32XX_TSC_CON, tmp); + + /* These values are all preset */ + tsc_writel(tsc, LPC32XX_TSC_SEL, LPC32XX_TSC_SEL_DEFVAL); + tsc_writel(tsc, LPC32XX_TSC_MIN_X, LPC32XX_TSC_MIN_XY_VAL); + tsc_writel(tsc, LPC32XX_TSC_MAX_X, LPC32XX_TSC_MAX_XY_VAL); + tsc_writel(tsc, LPC32XX_TSC_MIN_Y, LPC32XX_TSC_MIN_XY_VAL); + tsc_writel(tsc, LPC32XX_TSC_MAX_Y, LPC32XX_TSC_MAX_XY_VAL); + + /* Aux support is not used */ + tsc_writel(tsc, LPC32XX_TSC_AUX_UTR, 0); + tsc_writel(tsc, LPC32XX_TSC_AUX_MIN, 0); + tsc_writel(tsc, LPC32XX_TSC_AUX_MAX, 0); + + /* + * Set sample rate to about 240Hz per X/Y pair. A single measurement + * consists of 4 pairs which gives about a 60Hz sample rate based on + * a stable 32768Hz clock source. Values are in clocks. + * Rate is (32768 / (RTR + XCONV + RTR + YCONV + DXP + TTR + UTR) / 4 + */ + tsc_writel(tsc, LPC32XX_TSC_RTR, 0x2); + tsc_writel(tsc, LPC32XX_TSC_DTR, 0x2); + tsc_writel(tsc, LPC32XX_TSC_TTR, 0x10); + tsc_writel(tsc, LPC32XX_TSC_DXP, 0x4); + tsc_writel(tsc, LPC32XX_TSC_UTR, 88); + + lpc32xx_fifo_clear(tsc); + + /* Enable automatic ts event capture */ + tsc_writel(tsc, LPC32XX_TSC_CON, tmp | LPC32XX_TSC_ADCCON_AUTO_EN); +} + +static int lpc32xx_ts_open(struct input_dev *dev) +{ + struct lpc32xx_tsc *tsc = input_get_drvdata(dev); + + lpc32xx_setup_tsc(tsc); + + return 0; +} + +static void lpc32xx_ts_close(struct input_dev *dev) +{ + struct lpc32xx_tsc *tsc = input_get_drvdata(dev); + + lpc32xx_stop_tsc(tsc); +} + +static int __devinit lpc32xx_ts_probe(struct platform_device *pdev) +{ + struct lpc32xx_tsc *tsc; + struct input_dev *input; + struct resource *res; + resource_size_t size; + int irq; + int error; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Can't get memory resource\n"); + return -ENOENT; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "Can't get interrupt resource\n"); + return irq; + } + + tsc = kzalloc(sizeof(*tsc), GFP_KERNEL); + input = input_allocate_device(); + if (!tsc || !input) { + dev_err(&pdev->dev, "failed allocating memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + tsc->dev = input; + tsc->irq = irq; + + size = resource_size(res); + + if (!request_mem_region(res->start, size, pdev->name)) { + dev_err(&pdev->dev, "TSC registers are not free\n"); + error = -EBUSY; + goto err_free_mem; + } + + tsc->tsc_base = ioremap(res->start, size); + if (!tsc->tsc_base) { + dev_err(&pdev->dev, "Can't map memory\n"); + error = -ENOMEM; + goto err_release_mem; + } + + tsc->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(tsc->clk)) { + dev_err(&pdev->dev, "failed getting clock\n"); + error = PTR_ERR(tsc->clk); + goto err_unmap; + } + + input->name = MOD_NAME; + input->phys = "lpc32xx/input0"; + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0002; + input->id.version = 0x0100; + input->dev.parent = &pdev->dev; + input->open = lpc32xx_ts_open; + input->close = lpc32xx_ts_close; + + input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(input, ABS_X, LPC32XX_TSC_MIN_XY_VAL, + LPC32XX_TSC_MAX_XY_VAL, 0, 0); + input_set_abs_params(input, ABS_Y, LPC32XX_TSC_MIN_XY_VAL, + LPC32XX_TSC_MAX_XY_VAL, 0, 0); + + input_set_drvdata(input, tsc); + + error = request_irq(tsc->irq, lpc32xx_ts_interrupt, + IRQF_DISABLED, pdev->name, tsc); + if (error) { + dev_err(&pdev->dev, "failed requesting interrupt\n"); + goto err_put_clock; + } + + error = input_register_device(input); + if (error) { + dev_err(&pdev->dev, "failed registering input device\n"); + goto err_free_irq; + } + + platform_set_drvdata(pdev, tsc); + device_init_wakeup(&pdev->dev, 1); + + return 0; + +err_free_irq: + free_irq(tsc->irq, tsc); +err_put_clock: + clk_put(tsc->clk); +err_unmap: + iounmap(tsc->tsc_base); +err_release_mem: + release_mem_region(res->start, size); +err_free_mem: + input_free_device(input); + kfree(tsc); + + return error; +} + +static int __devexit lpc32xx_ts_remove(struct platform_device *pdev) +{ + struct lpc32xx_tsc *tsc = platform_get_drvdata(pdev); + struct resource *res; + + device_init_wakeup(&pdev->dev, 0); + free_irq(tsc->irq, tsc); + + input_unregister_device(tsc->dev); + + clk_put(tsc->clk); + + iounmap(tsc->tsc_base); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + + kfree(tsc); + + return 0; +} + +#ifdef CONFIG_PM +static int lpc32xx_ts_suspend(struct device *dev) +{ + struct lpc32xx_tsc *tsc = dev_get_drvdata(dev); + struct input_dev *input = tsc->dev; + + /* + * Suspend and resume can be called when the device hasn't been + * enabled. If there are no users that have the device open, then + * avoid calling the TSC stop and start functions as the TSC + * isn't yet clocked. + */ + mutex_lock(&input->mutex); + + if (input->users) { + if (device_may_wakeup(dev)) + enable_irq_wake(tsc->irq); + else + lpc32xx_stop_tsc(tsc); + } + + mutex_unlock(&input->mutex); + + return 0; +} + +static int lpc32xx_ts_resume(struct device *dev) +{ + struct lpc32xx_tsc *tsc = dev_get_drvdata(dev); + struct input_dev *input = tsc->dev; + + mutex_lock(&input->mutex); + + if (input->users) { + if (device_may_wakeup(dev)) + disable_irq_wake(tsc->irq); + else + lpc32xx_setup_tsc(tsc); + } + + mutex_unlock(&input->mutex); + + return 0; +} + +static const struct dev_pm_ops lpc32xx_ts_pm_ops = { + .suspend = lpc32xx_ts_suspend, + .resume = lpc32xx_ts_resume, +}; +#define LPC32XX_TS_PM_OPS (&lpc32xx_ts_pm_ops) +#else +#define LPC32XX_TS_PM_OPS NULL +#endif + +static struct platform_driver lpc32xx_ts_driver = { + .probe = lpc32xx_ts_probe, + .remove = __devexit_p(lpc32xx_ts_remove), + .driver = { + .name = MOD_NAME, + .owner = THIS_MODULE, + .pm = LPC32XX_TS_PM_OPS, + }, +}; + +static int __init lpc32xx_ts_init(void) +{ + return platform_driver_register(&lpc32xx_ts_driver); +} +module_init(lpc32xx_ts_init); + +static void __exit lpc32xx_ts_exit(void) +{ + platform_driver_unregister(&lpc32xx_ts_driver); +} +module_exit(lpc32xx_ts_exit); + +MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com"); +MODULE_DESCRIPTION("LPC32XX TSC Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:lpc32xx_ts"); diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c index 6085d12fd561..8feb7f3c8be1 100644 --- a/drivers/input/touchscreen/s3c2410_ts.c +++ b/drivers/input/touchscreen/s3c2410_ts.c @@ -350,7 +350,7 @@ static int __devinit s3c2410ts_probe(struct platform_device *pdev) err_tcirq: free_irq(ts.irq_tc, ts.input); err_inputdev: - input_unregister_device(ts.input); + input_free_device(ts.input); err_iomap: iounmap(ts.io); err_clk: diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c index 656148ec0027..ae88e13c99ff 100644 --- a/drivers/input/touchscreen/stmpe-ts.c +++ b/drivers/input/touchscreen/stmpe-ts.c @@ -268,7 +268,7 @@ static int __devinit stmpe_input_probe(struct platform_device *pdev) struct stmpe_touch *ts; struct input_dev *idev; struct stmpe_ts_platform_data *ts_pdata = NULL; - int ret = 0; + int ret; int ts_irq; ts_irq = platform_get_irq_byname(pdev, "FIFO_TH"); @@ -276,12 +276,16 @@ static int __devinit stmpe_input_probe(struct platform_device *pdev) return ts_irq; ts = kzalloc(sizeof(*ts), GFP_KERNEL); - if (!ts) + if (!ts) { + ret = -ENOMEM; goto err_out; + } idev = input_allocate_device(); - if (!idev) + if (!idev) { + ret = -ENOMEM; goto err_free_ts; + } platform_set_drvdata(pdev, ts); ts->stmpe = stmpe; @@ -361,7 +365,6 @@ static int __devexit stmpe_ts_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); input_unregister_device(ts->idev); - input_free_device(ts->idev); kfree(ts); diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c index a644d18c04dc..c8c136cf7bbc 100644 --- a/drivers/input/touchscreen/tps6507x-ts.c +++ b/drivers/input/touchscreen/tps6507x-ts.c @@ -335,6 +335,7 @@ static int tps6507x_ts_probe(struct platform_device *pdev) dev_err(tsc->dev, "schedule failed"); goto err2; } + platform_set_drvdata(pdev, tps6507x_dev); return 0; @@ -358,7 +359,7 @@ static int __devexit tps6507x_ts_remove(struct platform_device *pdev) cancel_delayed_work_sync(&tsc->work); destroy_workqueue(tsc->wq); - input_free_device(input_dev); + input_unregister_device(input_dev); tps6507x_dev->ts = NULL; kfree(tsc); diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index be23780e8a3e..80467f262331 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -265,7 +265,7 @@ static int __devinit tsc2007_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct tsc2007 *ts; - struct tsc2007_platform_data *pdata = pdata = client->dev.platform_data; + struct tsc2007_platform_data *pdata = client->dev.platform_data; struct input_dev *input_dev; int err; diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index 56dc35c94bb1..9ae4c7b16ba7 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -2,6 +2,7 @@ * Wacom W8001 penabled serial touchscreen driver * * Copyright (c) 2008 Jaya Kumar + * Copyright (c) 2010 Red Hat, Inc. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for @@ -30,11 +31,24 @@ MODULE_LICENSE("GPL"); #define W8001_LEAD_BYTE 0x80 #define W8001_TAB_MASK 0x40 #define W8001_TAB_BYTE 0x40 +/* set in first byte of touch data packets */ +#define W8001_TOUCH_MASK (0x10 | W8001_LEAD_MASK) +#define W8001_TOUCH_BYTE (0x10 | W8001_LEAD_BYTE) #define W8001_QUERY_PACKET 0x20 #define W8001_CMD_START '1' #define W8001_CMD_QUERY '*' +#define W8001_CMD_TOUCHQUERY '%' + +/* length of data packets in bytes, depends on device. */ +#define W8001_PKTLEN_TOUCH93 5 +#define W8001_PKTLEN_TOUCH9A 7 +#define W8001_PKTLEN_TPCPEN 9 +#define W8001_PKTLEN_TPCCTL 11 /* control packet */ +#define W8001_PKTLEN_TOUCH2FG 13 + +#define MAX_TRACKING_ID 0xFF /* arbitrarily chosen */ struct w8001_coord { u8 rdy; @@ -48,6 +62,15 @@ struct w8001_coord { u8 tilt_y; }; +/* touch query reply packet */ +struct w8001_touch_query { + u8 panel_res; + u8 capacity_res; + u8 sensor_id; + u16 x; + u16 y; +}; + /* * Per-touchscreen data. */ @@ -62,6 +85,9 @@ struct w8001 { unsigned char response[W8001_MAX_LENGTH]; unsigned char data[W8001_MAX_LENGTH]; char phys[32]; + int type; + unsigned int pktlen; + int trkid[2]; }; static void parse_data(u8 *data, struct w8001_coord *coord) @@ -88,11 +114,98 @@ static void parse_data(u8 *data, struct w8001_coord *coord) coord->tilt_y = data[8] & 0x7F; } +static void parse_touch(struct w8001 *w8001) +{ + static int trkid; + struct input_dev *dev = w8001->dev; + unsigned char *data = w8001->data; + int i; + + for (i = 0; i < 2; i++) { + input_mt_slot(dev, i); + + if (data[0] & (1 << i)) { + int x = (data[6 * i + 1] << 7) | (data[6 * i + 2]); + int y = (data[6 * i + 3] << 7) | (data[6 * i + 4]); + /* data[5,6] and [11,12] is finger capacity */ + + input_report_abs(dev, ABS_MT_POSITION_X, x); + input_report_abs(dev, ABS_MT_POSITION_Y, y); + input_report_abs(dev, ABS_MT_TOOL_TYPE, MT_TOOL_FINGER); + if (w8001->trkid[i] < 0) + w8001->trkid[i] = trkid++ & MAX_TRACKING_ID; + } else { + w8001->trkid[i] = -1; + } + input_report_abs(dev, ABS_MT_TRACKING_ID, w8001->trkid[i]); + } + + input_sync(dev); +} + +static void parse_touchquery(u8 *data, struct w8001_touch_query *query) +{ + memset(query, 0, sizeof(*query)); + + query->panel_res = data[1]; + query->sensor_id = data[2] & 0x7; + query->capacity_res = data[7]; + + query->x = data[3] << 9; + query->x |= data[4] << 2; + query->x |= (data[2] >> 5) & 0x3; + + query->y = data[5] << 9; + query->y |= data[6] << 2; + query->y |= (data[2] >> 3) & 0x3; +} + +static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord) +{ + struct input_dev *dev = w8001->dev; + + /* + * We have 1 bit for proximity (rdy) and 3 bits for tip, side, + * side2/eraser. If rdy && f2 are set, this can be either pen + side2, + * or eraser. assume + * - if dev is already in proximity and f2 is toggled → pen + side2 + * - if dev comes into proximity with f2 set → eraser + * If f2 disappears after assuming eraser, fake proximity out for + * eraser and in for pen. + */ + + if (!w8001->type) { + w8001->type = coord->f2 ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + } else if (w8001->type == BTN_TOOL_RUBBER) { + if (!coord->f2) { + input_report_abs(dev, ABS_PRESSURE, 0); + input_report_key(dev, BTN_TOUCH, 0); + input_report_key(dev, BTN_STYLUS, 0); + input_report_key(dev, BTN_STYLUS2, 0); + input_report_key(dev, BTN_TOOL_RUBBER, 0); + input_sync(dev); + w8001->type = BTN_TOOL_PEN; + } + } else { + input_report_key(dev, BTN_STYLUS2, coord->f2); + } + + input_report_abs(dev, ABS_X, coord->x); + input_report_abs(dev, ABS_Y, coord->y); + input_report_abs(dev, ABS_PRESSURE, coord->pen_pressure); + input_report_key(dev, BTN_TOUCH, coord->tsw); + input_report_key(dev, BTN_STYLUS, coord->f1); + input_report_key(dev, w8001->type, coord->rdy); + input_sync(dev); + + if (!coord->rdy) + w8001->type = 0; +} + static irqreturn_t w8001_interrupt(struct serio *serio, unsigned char data, unsigned int flags) { struct w8001 *w8001 = serio_get_drvdata(serio); - struct input_dev *dev = w8001->dev; struct w8001_coord coord; unsigned char tmp; @@ -105,26 +218,45 @@ static irqreturn_t w8001_interrupt(struct serio *serio, } break; - case 8: + case W8001_PKTLEN_TOUCH93 - 1: + case W8001_PKTLEN_TOUCH9A - 1: + /* ignore one-finger touch packet. */ + if (w8001->pktlen == w8001->idx) + w8001->idx = 0; + break; + + /* Pen coordinates packet */ + case W8001_PKTLEN_TPCPEN - 1: tmp = w8001->data[0] & W8001_TAB_MASK; if (unlikely(tmp == W8001_TAB_BYTE)) break; + tmp = (w8001->data[0] & W8001_TOUCH_BYTE); + if (tmp == W8001_TOUCH_BYTE) + break; + w8001->idx = 0; parse_data(w8001->data, &coord); - input_report_abs(dev, ABS_X, coord.x); - input_report_abs(dev, ABS_Y, coord.y); - input_report_abs(dev, ABS_PRESSURE, coord.pen_pressure); - input_report_key(dev, BTN_TOUCH, coord.tsw); - input_sync(dev); + report_pen_events(w8001, &coord); break; - case 10: + /* control packet */ + case W8001_PKTLEN_TPCCTL - 1: + tmp = (w8001->data[0] & W8001_TOUCH_MASK); + if (tmp == W8001_TOUCH_BYTE) + break; + w8001->idx = 0; memcpy(w8001->response, w8001->data, W8001_MAX_LENGTH); w8001->response_type = W8001_QUERY_PACKET; complete(&w8001->cmd_done); break; + + /* 2 finger touch packet */ + case W8001_PKTLEN_TOUCH2FG - 1: + w8001->idx = 0; + parse_touch(w8001); + break; } return IRQ_HANDLED; @@ -167,6 +299,38 @@ static int w8001_setup(struct w8001 *w8001) input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0); input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0); + error = w8001_command(w8001, W8001_CMD_TOUCHQUERY, true); + if (!error) { + struct w8001_touch_query touch; + + parse_touchquery(w8001->response, &touch); + + switch (touch.sensor_id) { + case 0: + case 2: + w8001->pktlen = W8001_PKTLEN_TOUCH93; + break; + case 1: + case 3: + case 4: + w8001->pktlen = W8001_PKTLEN_TOUCH9A; + break; + case 5: + w8001->pktlen = W8001_PKTLEN_TOUCH2FG; + + input_mt_create_slots(dev, 2); + input_set_abs_params(dev, ABS_MT_TRACKING_ID, + 0, MAX_TRACKING_ID, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_X, + 0, touch.x, 0, 0); + input_set_abs_params(dev, ABS_MT_POSITION_Y, + 0, touch.y, 0, 0); + input_set_abs_params(dev, ABS_MT_TOOL_TYPE, + 0, 0, 0, 0); + break; + } + } + return w8001_command(w8001, W8001_CMD_START, false); } @@ -208,6 +372,7 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv) w8001->serio = serio; w8001->id = serio->id.id; w8001->dev = input_dev; + w8001->trkid[0] = w8001->trkid[1] = -1; init_completion(&w8001->cmd_done); snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys); @@ -221,6 +386,10 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv) input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_dev->keybit[BIT_WORD(BTN_TOOL_PEN)] |= BIT_MASK(BTN_TOOL_PEN); + input_dev->keybit[BIT_WORD(BTN_TOOL_RUBBER)] |= BIT_MASK(BTN_TOOL_RUBBER); + input_dev->keybit[BIT_WORD(BTN_STYLUS)] |= BIT_MASK(BTN_STYLUS); + input_dev->keybit[BIT_WORD(BTN_STYLUS2)] |= BIT_MASK(BTN_STYLUS2); serio_set_drvdata(serio, w8001); err = serio_open(serio, drv); diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index cbfef1ea7e30..6b75c9f660ae 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -125,6 +125,8 @@ int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel) { int power_adc = 0, auxval; u16 power = 0; + int rc = 0; + int timeout = 0; /* get codec */ mutex_lock(&wm->codec_mutex); @@ -143,7 +145,9 @@ int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel) /* Turn polling mode on to read AUX ADC */ wm->pen_probably_down = 1; - wm->codec->poll_sample(wm, adcsel, &auxval); + + while (rc != RC_VALID && timeout++ < 5) + rc = wm->codec->poll_sample(wm, adcsel, &auxval); if (power_adc) wm97xx_reg_write(wm, AC97_EXTENDED_MID, power | 0x8000); @@ -152,8 +156,15 @@ int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel) wm->pen_probably_down = 0; + if (timeout >= 5) { + dev_err(wm->dev, + "timeout reading auxadc %d, disabling digitiser\n", + adcsel); + wm->codec->dig_enable(wm, false); + } + mutex_unlock(&wm->codec_mutex); - return auxval & 0xfff; + return (rc == RC_VALID ? auxval & 0xfff : -EBUSY); } EXPORT_SYMBOL_GPL(wm97xx_read_aux_adc); @@ -684,8 +695,7 @@ static int wm97xx_probe(struct device *dev) touch_reg_err: platform_device_put(wm->touch_dev); touch_err: - platform_device_unregister(wm->battery_dev); - wm->battery_dev = NULL; + platform_device_del(wm->battery_dev); batt_reg_err: platform_device_put(wm->battery_dev); batt_err: diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c index 7961d59f5cac..c06b4d50a3dc 100644 --- a/drivers/media/IR/ir-keytable.c +++ b/drivers/media/IR/ir-keytable.c @@ -25,14 +25,56 @@ #define IR_KEYPRESS_TIMEOUT 250 /** + * ir_create_table() - initializes a scancode table + * @rc_tab: the ir_scancode_table to initialize + * @name: name to assign to the table + * @ir_type: ir type to assign to the new table + * @size: initial size of the table + * @return: zero on success or a negative error code + * + * This routine will initialize the ir_scancode_table and will allocate + * memory to hold at least the specified number elements. + */ +static int ir_create_table(struct ir_scancode_table *rc_tab, + const char *name, u64 ir_type, size_t size) +{ + rc_tab->name = name; + rc_tab->ir_type = ir_type; + rc_tab->alloc = roundup_pow_of_two(size * sizeof(struct ir_scancode)); + rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode); + rc_tab->scan = kmalloc(rc_tab->alloc, GFP_KERNEL); + if (!rc_tab->scan) + return -ENOMEM; + + IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n", + rc_tab->size, rc_tab->alloc); + return 0; +} + +/** + * ir_free_table() - frees memory allocated by a scancode table + * @rc_tab: the table whose mappings need to be freed + * + * This routine will free memory alloctaed for key mappings used by given + * scancode table. + */ +static void ir_free_table(struct ir_scancode_table *rc_tab) +{ + rc_tab->size = 0; + kfree(rc_tab->scan); + rc_tab->scan = NULL; +} + +/** * ir_resize_table() - resizes a scancode table if necessary * @rc_tab: the ir_scancode_table to resize + * @gfp_flags: gfp flags to use when allocating memory * @return: zero on success or a negative error code * * This routine will shrink the ir_scancode_table if it has lots of * unused entries and grow it if it is full. */ -static int ir_resize_table(struct ir_scancode_table *rc_tab) +static int ir_resize_table(struct ir_scancode_table *rc_tab, gfp_t gfp_flags) { unsigned int oldalloc = rc_tab->alloc; unsigned int newalloc = oldalloc; @@ -57,7 +99,7 @@ static int ir_resize_table(struct ir_scancode_table *rc_tab) if (newalloc == oldalloc) return 0; - newscan = kmalloc(newalloc, GFP_ATOMIC); + newscan = kmalloc(newalloc, gfp_flags); if (!newscan) { IR_dprintk(1, "Failed to kmalloc %u bytes\n", newalloc); return -ENOMEM; @@ -72,26 +114,78 @@ static int ir_resize_table(struct ir_scancode_table *rc_tab) } /** - * ir_do_setkeycode() - internal function to set a keycode in the - * scancode->keycode table + * ir_update_mapping() - set a keycode in the scancode->keycode table * @dev: the struct input_dev device descriptor - * @rc_tab: the struct ir_scancode_table to set the keycode in - * @scancode: the scancode for the ir command - * @keycode: the keycode for the ir command - * @resize: whether the keytable may be shrunk - * @return: -EINVAL if the keycode could not be inserted, otherwise zero. + * @rc_tab: scancode table to be adjusted + * @index: index of the mapping that needs to be updated + * @keycode: the desired keycode + * @return: previous keycode assigned to the mapping + * + * This routine is used to update scancode->keycopde mapping at given + * position. + */ +static unsigned int ir_update_mapping(struct input_dev *dev, + struct ir_scancode_table *rc_tab, + unsigned int index, + unsigned int new_keycode) +{ + int old_keycode = rc_tab->scan[index].keycode; + int i; + + /* Did the user wish to remove the mapping? */ + if (new_keycode == KEY_RESERVED || new_keycode == KEY_UNKNOWN) { + IR_dprintk(1, "#%d: Deleting scan 0x%04x\n", + index, rc_tab->scan[index].scancode); + rc_tab->len--; + memmove(&rc_tab->scan[index], &rc_tab->scan[index+ 1], + (rc_tab->len - index) * sizeof(struct ir_scancode)); + } else { + IR_dprintk(1, "#%d: %s scan 0x%04x with key 0x%04x\n", + index, + old_keycode == KEY_RESERVED ? "New" : "Replacing", + rc_tab->scan[index].scancode, new_keycode); + rc_tab->scan[index].keycode = new_keycode; + __set_bit(new_keycode, dev->keybit); + } + + if (old_keycode != KEY_RESERVED) { + /* A previous mapping was updated... */ + __clear_bit(old_keycode, dev->keybit); + /* ... but another scancode might use the same keycode */ + for (i = 0; i < rc_tab->len; i++) { + if (rc_tab->scan[i].keycode == old_keycode) { + __set_bit(old_keycode, dev->keybit); + break; + } + } + + /* Possibly shrink the keytable, failure is not a problem */ + ir_resize_table(rc_tab, GFP_ATOMIC); + } + + return old_keycode; +} + +/** + * ir_locate_scancode() - set a keycode in the scancode->keycode table + * @ir_dev: the struct ir_input_dev device descriptor + * @rc_tab: scancode table to be searched + * @scancode: the desired scancode + * @resize: controls whether we allowed to resize the table to + * accomodate not yet present scancodes + * @return: index of the mapping containing scancode in question + * or -1U in case of failure. * - * This routine is used internally to manipulate the scancode->keycode table. - * The caller has to hold @rc_tab->lock. + * This routine is used to locate given scancode in ir_scancode_table. + * If scancode is not yet present the routine will allocate a new slot + * for it. */ -static int ir_do_setkeycode(struct input_dev *dev, - struct ir_scancode_table *rc_tab, - unsigned scancode, unsigned keycode, - bool resize) +static unsigned int ir_establish_scancode(struct ir_input_dev *ir_dev, + struct ir_scancode_table *rc_tab, + unsigned int scancode, + bool resize) { unsigned int i; - int old_keycode = KEY_RESERVED; - struct ir_input_dev *ir_dev = input_get_drvdata(dev); /* * Unfortunately, some hardware-based IR decoders don't provide @@ -100,65 +194,34 @@ static int ir_do_setkeycode(struct input_dev *dev, * the provided IR with another one, it is needed to allow loading * IR tables from other remotes. So, */ - if (ir_dev->props && ir_dev->props->scanmask) { + if (ir_dev->props && ir_dev->props->scanmask) scancode &= ir_dev->props->scanmask; - } /* First check if we already have a mapping for this ir command */ for (i = 0; i < rc_tab->len; i++) { + if (rc_tab->scan[i].scancode == scancode) + return i; + /* Keytable is sorted from lowest to highest scancode */ - if (rc_tab->scan[i].scancode > scancode) + if (rc_tab->scan[i].scancode >= scancode) break; - else if (rc_tab->scan[i].scancode < scancode) - continue; - - old_keycode = rc_tab->scan[i].keycode; - rc_tab->scan[i].keycode = keycode; - - /* Did the user wish to remove the mapping? */ - if (keycode == KEY_RESERVED || keycode == KEY_UNKNOWN) { - IR_dprintk(1, "#%d: Deleting scan 0x%04x\n", - i, scancode); - rc_tab->len--; - memmove(&rc_tab->scan[i], &rc_tab->scan[i + 1], - (rc_tab->len - i) * sizeof(struct ir_scancode)); - } - - /* Possibly shrink the keytable, failure is not a problem */ - ir_resize_table(rc_tab); - break; } - if (old_keycode == KEY_RESERVED && keycode != KEY_RESERVED) { - /* No previous mapping found, we might need to grow the table */ - if (resize && ir_resize_table(rc_tab)) - return -ENOMEM; - - IR_dprintk(1, "#%d: New scan 0x%04x with key 0x%04x\n", - i, scancode, keycode); + /* No previous mapping found, we might need to grow the table */ + if (rc_tab->size == rc_tab->len) { + if (!resize || ir_resize_table(rc_tab, GFP_ATOMIC)) + return -1U; + } - /* i is the proper index to insert our new keycode */ + /* i is the proper index to insert our new keycode */ + if (i < rc_tab->len) memmove(&rc_tab->scan[i + 1], &rc_tab->scan[i], (rc_tab->len - i) * sizeof(struct ir_scancode)); - rc_tab->scan[i].scancode = scancode; - rc_tab->scan[i].keycode = keycode; - rc_tab->len++; - set_bit(keycode, dev->keybit); - } else { - IR_dprintk(1, "#%d: Replacing scan 0x%04x with key 0x%04x\n", - i, scancode, keycode); - /* A previous mapping was updated... */ - clear_bit(old_keycode, dev->keybit); - /* ...but another scancode might use the same keycode */ - for (i = 0; i < rc_tab->len; i++) { - if (rc_tab->scan[i].keycode == old_keycode) { - set_bit(old_keycode, dev->keybit); - break; - } - } - } + rc_tab->scan[i].scancode = scancode; + rc_tab->scan[i].keycode = KEY_RESERVED; + rc_tab->len++; - return 0; + return i; } /** @@ -171,17 +234,41 @@ static int ir_do_setkeycode(struct input_dev *dev, * This routine is used to handle evdev EVIOCSKEY ioctl. */ static int ir_setkeycode(struct input_dev *dev, - unsigned int scancode, unsigned int keycode) + const struct input_keymap_entry *ke, + unsigned int *old_keycode) { - int rc; - unsigned long flags; struct ir_input_dev *ir_dev = input_get_drvdata(dev); struct ir_scancode_table *rc_tab = &ir_dev->rc_tab; + unsigned int index; + unsigned int scancode; + int retval; + unsigned long flags; spin_lock_irqsave(&rc_tab->lock, flags); - rc = ir_do_setkeycode(dev, rc_tab, scancode, keycode, true); + + if (ke->flags & INPUT_KEYMAP_BY_INDEX) { + index = ke->index; + if (index >= rc_tab->len) { + retval = -EINVAL; + goto out; + } + } else { + retval = input_scancode_to_scalar(ke, &scancode); + if (retval) + goto out; + + index = ir_establish_scancode(ir_dev, rc_tab, scancode, true); + if (index >= rc_tab->len) { + retval = -ENOMEM; + goto out; + } + } + + *old_keycode = ir_update_mapping(dev, rc_tab, index, ke->keycode); + +out: spin_unlock_irqrestore(&rc_tab->lock, flags); - return rc; + return retval; } /** @@ -189,32 +276,73 @@ static int ir_setkeycode(struct input_dev *dev, * @dev: the struct input_dev device descriptor * @to: the struct ir_scancode_table to copy entries to * @from: the struct ir_scancode_table to copy entries from - * @return: -EINVAL if all keycodes could not be inserted, otherwise zero. + * @return: -ENOMEM if all keycodes could not be inserted, otherwise zero. * * This routine is used to handle table initialization. */ -static int ir_setkeytable(struct input_dev *dev, - struct ir_scancode_table *to, +static int ir_setkeytable(struct ir_input_dev *ir_dev, const struct ir_scancode_table *from) { - struct ir_input_dev *ir_dev = input_get_drvdata(dev); struct ir_scancode_table *rc_tab = &ir_dev->rc_tab; - unsigned long flags; - unsigned int i; - int rc = 0; + unsigned int i, index; + int rc; + + rc = ir_create_table(&ir_dev->rc_tab, + from->name, from->ir_type, from->size); + if (rc) + return rc; + + IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n", + rc_tab->size, rc_tab->alloc); - spin_lock_irqsave(&rc_tab->lock, flags); for (i = 0; i < from->size; i++) { - rc = ir_do_setkeycode(dev, to, from->scan[i].scancode, - from->scan[i].keycode, false); - if (rc) + index = ir_establish_scancode(ir_dev, rc_tab, + from->scan[i].scancode, false); + if (index >= rc_tab->len) { + rc = -ENOMEM; break; + } + + ir_update_mapping(ir_dev->input_dev, rc_tab, index, + from->scan[i].keycode); } - spin_unlock_irqrestore(&rc_tab->lock, flags); + + if (rc) + ir_free_table(rc_tab); + return rc; } /** + * ir_lookup_by_scancode() - locate mapping by scancode + * @rc_tab: the &struct ir_scancode_table to search + * @scancode: scancode to look for in the table + * @return: index in the table, -1U if not found + * + * This routine performs binary search in RC keykeymap table for + * given scancode. + */ +static unsigned int ir_lookup_by_scancode(const struct ir_scancode_table *rc_tab, + unsigned int scancode) +{ + unsigned int start = 0; + unsigned int end = rc_tab->len - 1; + unsigned int mid; + + while (start <= end) { + mid = (start + end) / 2; + if (rc_tab->scan[mid].scancode < scancode) + start = mid + 1; + else if (rc_tab->scan[mid].scancode > scancode) + end = mid - 1; + else + return mid; + } + + return -1U; +} + +/** * ir_getkeycode() - get a keycode from the scancode->keycode table * @dev: the struct input_dev device descriptor * @scancode: the desired scancode @@ -224,36 +352,46 @@ static int ir_setkeytable(struct input_dev *dev, * This routine is used to handle evdev EVIOCGKEY ioctl. */ static int ir_getkeycode(struct input_dev *dev, - unsigned int scancode, unsigned int *keycode) + struct input_keymap_entry *ke) { - int start, end, mid; - unsigned long flags; - int key = KEY_RESERVED; struct ir_input_dev *ir_dev = input_get_drvdata(dev); struct ir_scancode_table *rc_tab = &ir_dev->rc_tab; + struct ir_scancode *entry; + unsigned long flags; + unsigned int index; + unsigned int scancode; + int retval; spin_lock_irqsave(&rc_tab->lock, flags); - start = 0; - end = rc_tab->len - 1; - while (start <= end) { - mid = (start + end) / 2; - if (rc_tab->scan[mid].scancode < scancode) - start = mid + 1; - else if (rc_tab->scan[mid].scancode > scancode) - end = mid - 1; - else { - key = rc_tab->scan[mid].keycode; - break; - } + + if (ke->flags & INPUT_KEYMAP_BY_INDEX) { + index = ke->index; + } else { + retval = input_scancode_to_scalar(ke, &scancode); + if (retval) + goto out; + + index = ir_lookup_by_scancode(rc_tab, scancode); + } + + if (index >= rc_tab->len) { + if (!(ke->flags & INPUT_KEYMAP_BY_INDEX)) + IR_dprintk(1, "unknown key for scancode 0x%04x\n", + scancode); + retval = -EINVAL; + goto out; } - spin_unlock_irqrestore(&rc_tab->lock, flags); - if (key == KEY_RESERVED) - IR_dprintk(1, "unknown key for scancode 0x%04x\n", - scancode); + entry = &rc_tab->scan[index]; - *keycode = key; - return 0; + ke->index = index; + ke->keycode = entry->keycode; + ke->len = sizeof(entry->scancode); + memcpy(ke->scancode, &entry->scancode, sizeof(entry->scancode)); + +out: + spin_unlock_irqrestore(&rc_tab->lock, flags); + return retval; } /** @@ -268,12 +406,24 @@ static int ir_getkeycode(struct input_dev *dev, */ u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode) { - int keycode; + struct ir_input_dev *ir_dev = input_get_drvdata(dev); + struct ir_scancode_table *rc_tab = &ir_dev->rc_tab; + unsigned int keycode; + unsigned int index; + unsigned long flags; + + spin_lock_irqsave(&rc_tab->lock, flags); + + index = ir_lookup_by_scancode(rc_tab, scancode); + keycode = index < rc_tab->len ? + rc_tab->scan[index].keycode : KEY_RESERVED; + + spin_unlock_irqrestore(&rc_tab->lock, flags); - ir_getkeycode(dev, scancode, &keycode); if (keycode != KEY_RESERVED) IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n", dev->name, scancode, keycode); + return keycode; } EXPORT_SYMBOL_GPL(ir_g_keycode_from_table); @@ -453,8 +603,8 @@ int __ir_input_register(struct input_dev *input_dev, goto out_dev; } - input_dev->getkeycode = ir_getkeycode; - input_dev->setkeycode = ir_setkeycode; + input_dev->getkeycode_new = ir_getkeycode; + input_dev->setkeycode_new = ir_setkeycode; input_set_drvdata(input_dev, ir_dev); ir_dev->input_dev = input_dev; @@ -462,12 +612,6 @@ int __ir_input_register(struct input_dev *input_dev, spin_lock_init(&ir_dev->keylock); setup_timer(&ir_dev->timer_keyup, ir_timer_keyup, (unsigned long)ir_dev); - ir_dev->rc_tab.name = rc_tab->name; - ir_dev->rc_tab.ir_type = rc_tab->ir_type; - ir_dev->rc_tab.alloc = roundup_pow_of_two(rc_tab->size * - sizeof(struct ir_scancode)); - ir_dev->rc_tab.scan = kmalloc(ir_dev->rc_tab.alloc, GFP_KERNEL); - ir_dev->rc_tab.size = ir_dev->rc_tab.alloc / sizeof(struct ir_scancode); if (props) { ir_dev->props = props; if (props->open) @@ -476,23 +620,14 @@ int __ir_input_register(struct input_dev *input_dev, input_dev->close = ir_close; } - if (!ir_dev->rc_tab.scan) { - rc = -ENOMEM; - goto out_name; - } - - IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n", - ir_dev->rc_tab.size, ir_dev->rc_tab.alloc); - set_bit(EV_KEY, input_dev->evbit); set_bit(EV_REP, input_dev->evbit); set_bit(EV_MSC, input_dev->evbit); set_bit(MSC_SCAN, input_dev->mscbit); - if (ir_setkeytable(input_dev, &ir_dev->rc_tab, rc_tab)) { - rc = -ENOMEM; - goto out_table; - } + rc = ir_setkeytable(ir_dev, rc_tab); + if (rc) + goto out_name; rc = ir_register_class(input_dev); if (rc < 0) @@ -522,7 +657,7 @@ int __ir_input_register(struct input_dev *input_dev, out_event: ir_unregister_class(input_dev); out_table: - kfree(ir_dev->rc_tab.scan); + ir_free_table(&ir_dev->rc_tab); out_name: kfree(ir_dev->driver_name); out_dev: @@ -540,7 +675,6 @@ EXPORT_SYMBOL_GPL(__ir_input_register); void ir_input_unregister(struct input_dev *input_dev) { struct ir_input_dev *ir_dev = input_get_drvdata(input_dev); - struct ir_scancode_table *rc_tab; if (!ir_dev) return; @@ -552,10 +686,7 @@ void ir_input_unregister(struct input_dev *input_dev) if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ir_raw_event_unregister(input_dev); - rc_tab = &ir_dev->rc_tab; - rc_tab->size = 0; - kfree(rc_tab->scan); - rc_tab->scan = NULL; + ir_free_table(&ir_dev->rc_tab); ir_unregister_class(input_dev); diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index defa786dee34..b8c4b80e4c43 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -338,6 +338,21 @@ static struct resource ab8500_rtc_resources[] = { }, }; +static struct resource ab8500_poweronkey_db_resources[] = { + { + .name = "ONKEY_DBF", + .start = AB8500_INT_PON_KEY1DB_F, + .end = AB8500_INT_PON_KEY1DB_F, + .flags = IORESOURCE_IRQ, + }, + { + .name = "ONKEY_DBR", + .start = AB8500_INT_PON_KEY1DB_R, + .end = AB8500_INT_PON_KEY1DB_R, + .flags = IORESOURCE_IRQ, + }, +}; + static struct mfd_cell ab8500_devs[] = { { .name = "ab8500-gpadc", @@ -354,6 +369,11 @@ static struct mfd_cell ab8500_devs[] = { { .name = "ab8500-usb", }, { .name = "ab8500-pwm", }, { .name = "ab8500-regulator", }, + { + .name = "ab8500-poweron-key", + .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), + .resources = ab8500_poweronkey_db_resources, + }, }; int __devinit ab8500_init(struct ab8500 *ab8500) diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 335311a98fdc..8e03e7600239 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -139,8 +139,6 @@ source "drivers/staging/adis16255/Kconfig" source "drivers/staging/xgifb/Kconfig" -source "drivers/staging/mrst-touchscreen/Kconfig" - source "drivers/staging/msm/Kconfig" source "drivers/staging/lirc/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index e3f1e1b6095e..0e7d7559d379 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -51,7 +51,6 @@ obj-$(CONFIG_CXT1E1) += cxt1e1/ obj-$(CONFIG_TI_ST) += ti-st/ obj-$(CONFIG_ADIS16255) += adis16255/ obj-$(CONFIG_FB_XGI) += xgifb/ -obj-$(CONFIG_TOUCHSCREEN_MRSTOUCH) += mrst-touchscreen/ obj-$(CONFIG_MSM_STAGING) += msm/ obj-$(CONFIG_EASYCAP) += easycap/ obj-$(CONFIG_SOLO6X10) += solo6x10/ diff --git a/drivers/staging/mrst-touchscreen/Kconfig b/drivers/staging/mrst-touchscreen/Kconfig deleted file mode 100644 index c2af49217084..000000000000 --- a/drivers/staging/mrst-touchscreen/Kconfig +++ /dev/null @@ -1,7 +0,0 @@ -config TOUCHSCREEN_INTEL_MID - tristate "Intel MID platform resistive touchscreen" - depends on INTEL_SCU_IPC - default y - help - Say Y here if you have a Intel MID based touchscreen - If unsure, say N. diff --git a/drivers/staging/mrst-touchscreen/Makefile b/drivers/staging/mrst-touchscreen/Makefile deleted file mode 100644 index 2d638b0d70bf..000000000000 --- a/drivers/staging/mrst-touchscreen/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) := intel_mid_touch.o - - diff --git a/drivers/staging/mrst-touchscreen/TODO b/drivers/staging/mrst-touchscreen/TODO deleted file mode 100644 index 7157028d634a..000000000000 --- a/drivers/staging/mrst-touchscreen/TODO +++ /dev/null @@ -1,2 +0,0 @@ -- Move the driver to not think it is SPI (requires fixing some of the SFI - and firmware side) diff --git a/drivers/staging/mrst-touchscreen/intel-mid-touch.c b/drivers/staging/mrst-touchscreen/intel-mid-touch.c deleted file mode 100644 index abba22f921be..000000000000 --- a/drivers/staging/mrst-touchscreen/intel-mid-touch.c +++ /dev/null @@ -1,864 +0,0 @@ -/* - * intel_mid_touch.c - Intel MID Resistive Touch Screen Driver - * - * Copyright (C) 2008 Intel Corp - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; ifnot, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * Questions/Comments/Bug fixes to Sreedhara (sreedhara.ds@intel.com) - * Ramesh Agarwal (ramesh.agarwal@intel.com) - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * TODO: - * kill off mrstouch_debug eventually - * review conversion of r/m/w sequences - * Replace interrupt mutex abuse - * Kill of mrstouchdevp pointer - * - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/err.h> -#include <linux/param.h> -#include <linux/spi/spi.h> -#include <linux/irq.h> -#include <linux/delay.h> -#include <linux/kthread.h> -#include <asm/intel_scu_ipc.h> - - -#if defined(MRSTOUCH_DEBUG) -#define mrstouch_debug(fmt, args...)\ - do { \ - printk(KERN_DEBUG "\n[MRSTOUCH(%d)] - ", __LINE__); \ - printk(KERN_DEBUG fmt, ##args); \ - } while (0); -#else -#define mrstouch_debug(fmt, args...) -#endif - -/* PMIC Interrupt registers */ -#define PMIC_REG_ID1 0x00 /*PMIC ID1 register */ - -/* PMIC Interrupt registers */ -#define PMIC_REG_INT 0x04 /*PMIC interrupt register */ -#define PMIC_REG_MINT 0x05 /*PMIC interrupt mask register */ - -/* ADC Interrupt registers */ -#define PMIC_REG_ADCINT 0x5F /*ADC interrupt register */ -#define PMIC_REG_MADCINT 0x60 /*ADC interrupt mask register */ - -/* ADC Control registers */ -#define PMIC_REG_ADCCNTL1 0x61 /*ADC control register */ - -/* ADC Channel Selection registers */ -#define PMICADDR0 0xA4 -#define END_OF_CHANNEL 0x1F - -/* ADC Result register */ -#define PMIC_REG_ADCSNS0H 0x64 - -/* ADC channels for touch screen */ -#define MRST_TS_CHAN10 0xA /* Touch screen X+ connection */ -#define MRST_TS_CHAN11 0xB /* Touch screen X- connection */ -#define MRST_TS_CHAN12 0xC /* Touch screen Y+ connection */ -#define MRST_TS_CHAN13 0xD /* Touch screen Y- connection */ - -/* Touch screen coordinate constants */ -#define TOUCH_PRESSURE 50 -#define TOUCH_PRESSURE_FS 100 - -#define XMOVE_LIMIT 5 -#define YMOVE_LIMIT 5 -#define XYMOVE_CNT 3 - -#define MAX_10BIT ((1<<10)-1) - -/* Touch screen channel BIAS constants */ -#define XBIAS 0x20 -#define YBIAS 0x40 -#define ZBIAS 0x80 - -/* Touch screen coordinates */ -#define MIN_X 10 -#define MAX_X 1024 -#define MIN_Y 10 -#define MAX_Y 1024 -#define WAIT_ADC_COMPLETION 10 - -/* PMIC ADC round robin delays */ -#define ADC_LOOP_DELAY0 0x0 /* Continuous loop */ -#define ADC_LOOP_DELAY1 0x1 /* 4.5 ms approximate */ - -/* PMIC Vendor Identifiers */ -#define PMIC_VENDOR_FS 0 /* PMIC vendor FreeScale */ -#define PMIC_VENDOR_MAXIM 1 /* PMIC vendor MAXIM */ -#define PMIC_VENDOR_NEC 2 /* PMIC vendor NEC */ -#define MRSTOUCH_MAX_CHANNELS 32 /* Maximum ADC channels */ - -/* Touch screen device structure */ -struct mrstouch_dev { - struct spi_device *spi; /* SPI device associated with touch screen */ - struct input_dev *input; /* input device for touchscreen*/ - char phys[32]; /* Device name */ - struct task_struct *pendet_thrd; /* PENDET interrupt handler */ - struct mutex lock; /* Sync between interrupt and PENDET handler */ - bool busy; /* Busy flag */ - u16 asr; /* Address selection register */ - int irq; /* Touch screen IRQ # */ - uint vendor; /* PMIC vendor */ - uint rev; /* PMIC revision */ - bool suspended; /* Device suspended status */ - bool disabled; /* Device disabled status */ - u16 x; /* X coordinate */ - u16 y; /* Y coordinate */ - bool pendown; /* PEN position */ -} ; - - -/* Global Pointer to Touch screen device */ -static struct mrstouch_dev *mrstouchdevp; - -/* Utility to read PMIC ID */ -static int mrstouch_pmic_id(uint *vendor, uint *rev) -{ - int err; - u8 r; - - err = intel_scu_ipc_ioread8(PMIC_REG_ID1, &r); - if (err) - return err; - - *vendor = r & 0x7; - *rev = (r >> 3) & 0x7; - - return 0; -} - -/* - * Parse ADC channels to find end of the channel configured by other ADC user - * NEC and MAXIM requires 4 channels and FreeScale needs 18 channels - */ -static int mrstouch_chan_parse(struct mrstouch_dev *tsdev) -{ - int err, i, j, found; - u32 r32; - - found = -1; - - for (i = 0; i < MRSTOUCH_MAX_CHANNELS; i++) { - if (found >= 0) - break; - - err = intel_scu_ipc_ioread32(PMICADDR0, &r32); - if (err) - return err; - - for (j = 0; j < 32; j+= 8) { - if (((r32 >> j) & 0xFF) == END_OF_CHANNEL) { - found = i; - break; - } - } - } - if (found < 0) - return 0; - - if (tsdev->vendor == PMIC_VENDOR_FS) { - if (found && found > (MRSTOUCH_MAX_CHANNELS - 18)) - return -ENOSPC; - } else { - if (found && found > (MRSTOUCH_MAX_CHANNELS - 4)) - return -ENOSPC; - } - return found; -} - -/* Utility to enable/disable pendet. - * pendet set to true enables PENDET interrupt - * pendet set to false disables PENDET interrupt - * Also clears RND mask bit -*/ -static int pendet_enable(struct mrstouch_dev *tsdev, bool pendet) -{ - u16 reg; - u8 r; - u8 pendet_enabled = 0; - int retry = 0; - int err; - - err = intel_scu_ipc_ioread16(PMIC_REG_MADCINT, ®); - if (err) - return err; - - if (pendet) { - reg &= ~0x0005; - reg |= 0x2000; /* Enable pendet */ - } else - reg &= 0xDFFF; /* Disable pendet */ - - /* Set MADCINT and update ADCCNTL1 (next reg byte) */ - err = intel_scu_ipc_iowrite16(PMIC_REG_MADCINT, reg); - if (!pendet || err) - return err; - - /* - * Sometimes even after the register write succeeds - * the PMIC register value is not updated. Retry few iterations - * to enable pendet. - */ - - err = intel_scu_ipc_ioread8(PMIC_REG_ADCCNTL1, &r); - pendet_enabled = (r >> 5) & 0x01; - - retry = 0; - while (!err && !pendet_enabled) { - retry++; - msleep(10); - err = intel_scu_ipc_iowrite8(PMIC_REG_ADCCNTL1, reg >> 8); - if (err) - break; - err = intel_scu_ipc_ioread8(PMIC_REG_ADCCNTL1, &r); - if (err == 0) - pendet_enabled = (r >> 5) & 0x01; - if (retry >= 10) { - dev_err(&tsdev->spi->dev, "Touch screen disabled.\n"); - return -EIO; - } - } - return 0; -} - -/* To read PMIC ADC touch screen result - * Reads ADC storage registers for higher 7 and lower 3 bits - * converts the two readings to single value and turns off gain bit - */ -static int mrstouch_ts_chan_read(u16 offset, u16 chan, u16 *vp, u16 *vm) -{ - int err; - u16 result; - u32 res; - - result = PMIC_REG_ADCSNS0H + offset; - - if (chan == MRST_TS_CHAN12) - result += 4; - - err = intel_scu_ipc_ioread32(result, &res); - if (err) - return err; - - /* Mash the bits up */ - - *vp = (res & 0xFF) << 3; /* Highest 7 bits */ - *vp |= (res >> 8) & 0x07; /* Lower 3 bits */ - *vp &= 0x3FF; - - res >>= 16; - - *vm = (res & 0xFF) << 3; /* Highest 7 bits */ - *vm |= (res >> 8) & 0x07; /* Lower 3 bits */ - *vm &= 0x3FF; - - return 0; -} - -/* To configure touch screen channels - * Writes touch screen channels to ADC address selection registers - */ -static int mrstouch_ts_chan_set(uint offset) -{ - int count; - u16 chan; - u16 reg[5]; - u8 data[5]; - - chan = PMICADDR0 + offset; - for (count = 0; count <= 3; count++) { - reg[count] = chan++; - data[count] = MRST_TS_CHAN10 + count; - } - reg[count] = chan; - data[count] = END_OF_CHANNEL; - - return intel_scu_ipc_writev(reg, data, 5); -} - -/* Initialize ADC */ -static int mrstouch_adc_init(struct mrstouch_dev *tsdev) -{ - int err, start; - u8 ra, rm; - - err = mrstouch_pmic_id(&tsdev->vendor, &tsdev->rev); - if (err) { - dev_err(&tsdev->spi->dev, "Unable to read PMIC id\n"); - return err; - } - - start = mrstouch_chan_parse(tsdev); - if (start < 0) { - dev_err(&tsdev->spi->dev, "Unable to parse channels\n"); - return start; - } - - tsdev->asr = start; - - mrstouch_debug("Channel offset(%d): 0x%X\n", tsdev->asr, tsdev->vendor); - - /* ADC power on, start, enable PENDET and set loop delay - * ADC loop delay is set to 4.5 ms approximately - * Loop delay more than this results in jitter in adc readings - * Setting loop delay to 0 (continous loop) in MAXIM stops PENDET - * interrupt generation sometimes. - */ - - if (tsdev->vendor == PMIC_VENDOR_FS) { - ra = 0xE0 | ADC_LOOP_DELAY0; - rm = 0x5; - } else { - /* NEC and MAXIm not consistent with loop delay 0 */ - ra = 0xE0 | ADC_LOOP_DELAY1; - rm = 0x0; - - /* configure touch screen channels */ - err = mrstouch_ts_chan_set(tsdev->asr); - if (err) - return err; - } - err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, ra, 0xE7); - if (err == 0) - err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, rm, 0x03); - return err; -} - -/* Reports x,y coordinates to event subsystem */ -static void mrstouch_report_xy(struct mrstouch_dev *tsdev, u16 x, u16 y, u16 z) -{ - int xdiff, ydiff; - - if (tsdev->pendown && z <= TOUCH_PRESSURE) { - /* Pen removed, report button release */ - mrstouch_debug("BTN REL(%d)", z); - input_report_key(tsdev->input, BTN_TOUCH, 0); - tsdev->pendown = false; - } - - xdiff = abs(x - tsdev->x); - ydiff = abs(y - tsdev->y); - - /* - if x and y values changes for XYMOVE_CNT readings it is considered - as stylus is moving. This is required to differentiate between stylus - movement and jitter - */ - if (x < MIN_X || x > MAX_X || y < MIN_Y || y > MAX_Y) { - /* Spurious values, release button if touched and return */ - if (tsdev->pendown) { - mrstouch_debug("BTN REL(%d)", z); - input_report_key(tsdev->input, BTN_TOUCH, 0); - tsdev->pendown = false; - } - return; - } else if (xdiff >= XMOVE_LIMIT || ydiff >= YMOVE_LIMIT) { - tsdev->x = x; - tsdev->y = y; - - input_report_abs(tsdev->input, ABS_X, x); - input_report_abs(tsdev->input, ABS_Y, y); - input_sync(tsdev->input); - } - - - if (!tsdev->pendown && z > TOUCH_PRESSURE) { - /* Pen touched, report button touch */ - mrstouch_debug("BTN TCH(%d, %d, %d)", x, y, z); - input_report_key(tsdev->input, BTN_TOUCH, 1); - tsdev->pendown = true; - } -} - - -/* Utility to start ADC, used by freescale handler */ -static int pendet_mask(void) -{ - return intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x02, 0x02); -} - -/* Utility to stop ADC, used by freescale handler */ -static int pendet_umask(void) -{ - return intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x00, 0x02); -} - -/* Utility to read ADC, used by freescale handler */ -static int mrstouch_pmic_fs_adc_read(struct mrstouch_dev *tsdev) -{ - int err; - u16 x, y, z, result; - u16 reg[4]; - u8 data[4]; - - result = PMIC_REG_ADCSNS0H + tsdev->asr; - - reg[0] = result + 4; - reg[1] = result + 5; - reg[2] = result + 16; - reg[3] = result + 17; - - err = intel_scu_ipc_readv(reg, data, 4); - if (err) - goto ipc_error; - - x = data[0] << 3; /* Higher 7 bits */ - x |= data[1] & 0x7; /* Lower 3 bits */ - x &= 0x3FF; - - y = data[2] << 3; /* Higher 7 bits */ - y |= data[3] & 0x7; /* Lower 3 bits */ - y &= 0x3FF; - - /* Read Z value */ - reg[0] = result + 28; - reg[1] = result + 29; - - err = intel_scu_ipc_readv(reg, data, 4); - if (err) - goto ipc_error; - - z = data[0] << 3; /* Higher 7 bits */ - z |= data[1] & 0x7; /* Lower 3 bits */ - z &= 0x3FF; - -#if defined(MRSTOUCH_PRINT_XYZP) - mrstouch_debug("X: %d, Y: %d, Z: %d", x, y, z); -#endif - - if (z >= TOUCH_PRESSURE_FS) { - mrstouch_report_xy(tsdev, x, y, TOUCH_PRESSURE - 1); /* Pen Removed */ - return TOUCH_PRESSURE - 1; - } else { - mrstouch_report_xy(tsdev, x, y, TOUCH_PRESSURE + 1); /* Pen Touched */ - return TOUCH_PRESSURE + 1; - } - - return 0; - -ipc_error: - dev_err(&tsdev->spi->dev, "ipc error during fs_adc read\n"); - return err; -} - -/* To handle free scale pmic pendet interrupt */ -static int pmic0_pendet(void *dev_id) -{ - int err, count; - u16 chan; - unsigned int touched; - struct mrstouch_dev *tsdev = (struct mrstouch_dev *)dev_id; - u16 reg[5]; - u8 data[5]; - - chan = PMICADDR0 + tsdev->asr; - - /* Set X BIAS */ - for (count = 0; count <= 3; count++) { - reg[count] = chan++; - data[count] = 0x2A; - } - reg[count] = chan++; /* Dummy */ - data[count] = 0; - - err = intel_scu_ipc_writev(reg, data, 5); - if (err) - goto ipc_error; - - msleep(WAIT_ADC_COMPLETION); - - /* Set Y BIAS */ - for (count = 0; count <= 3; count++) { - reg[count] = chan++; - data[count] = 0x4A; - } - reg[count] = chan++; /* Dummy */ - data[count] = 0; - - err = intel_scu_ipc_writev(reg, data, 5); - if (err) - goto ipc_error; - - msleep(WAIT_ADC_COMPLETION); - - /* Set Z BIAS */ - err = intel_scu_ipc_iowrite32(chan + 2, 0x8A8A8A8A); - if (err) - goto ipc_error; - - msleep(WAIT_ADC_COMPLETION); - - /*Read touch screen channels till pen removed - * Freescale reports constant value of z for all points - * z is high when screen is not touched and low when touched - * Map high z value to not touched and low z value to pen touched - */ - touched = mrstouch_pmic_fs_adc_read(tsdev); - while (touched > TOUCH_PRESSURE) { - touched = mrstouch_pmic_fs_adc_read(tsdev); - msleep(WAIT_ADC_COMPLETION); - } - - /* Clear all TS channels */ - chan = PMICADDR0 + tsdev->asr; - for (count = 0; count <= 4; count++) { - reg[count] = chan++; - data[count] = 0; - } - err = intel_scu_ipc_writev(reg, data, 5); - if (err) - goto ipc_error; - - for (count = 0; count <= 4; count++) { - reg[count] = chan++; - data[count] = 0; - } - err = intel_scu_ipc_writev(reg, data, 5); - if (err) - goto ipc_error; - - err = intel_scu_ipc_iowrite32(chan + 2, 0x00000000); - if (err) - goto ipc_error; - - return 0; - -ipc_error: - dev_err(&tsdev->spi->dev, "ipc error during pendet\n"); - return err; -} - - -/* To enable X, Y and Z bias values - * Enables YPYM for X channels and XPXM for Y channels - */ -static int mrstouch_ts_bias_set(uint offset, uint bias) -{ - int count; - u16 chan, start; - u16 reg[4]; - u8 data[4]; - - chan = PMICADDR0 + offset; - start = MRST_TS_CHAN10; - - for (count = 0; count <= 3; count++) { - reg[count] = chan++; - data[count] = bias | (start + count); - } - return intel_scu_ipc_writev(reg, data, 4); -} - -/* To read touch screen channel values */ -static int mrstouch_adc_read(struct mrstouch_dev *tsdev) -{ - int err; - u16 xp, xm, yp, ym, zp, zm; - - /* configure Y bias for X channels */ - err = mrstouch_ts_bias_set(tsdev->asr, YBIAS); - if (err) - goto ipc_error; - - msleep(WAIT_ADC_COMPLETION); - - /* read x+ and x- channels */ - err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, &xp, &xm); - if (err) - goto ipc_error; - - /* configure x bias for y channels */ - err = mrstouch_ts_bias_set(tsdev->asr, XBIAS); - if (err) - goto ipc_error; - - msleep(WAIT_ADC_COMPLETION); - - /* read y+ and y- channels */ - err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN12, &yp, &ym); - if (err) - goto ipc_error; - - /* configure z bias for x and y channels */ - err = mrstouch_ts_bias_set(tsdev->asr, ZBIAS); - if (err) - goto ipc_error; - - msleep(WAIT_ADC_COMPLETION); - - /* read z+ and z- channels */ - err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, &zp, &zm); - if (err) - goto ipc_error; - -#if defined(MRSTOUCH_PRINT_XYZP) - printk(KERN_INFO "X+: %d, Y+: %d, Z+: %d\n", xp, yp, zp); -#endif - -#if defined(MRSTOUCH_PRINT_XYZM) - printk(KERN_INFO "X-: %d, Y-: %d, Z-: %d\n", xm, ym, zm); -#endif - - mrstouch_report_xy(tsdev, xp, yp, zp); /* report x and y to eventX */ - - return zp; - -ipc_error: - dev_err(&tsdev->spi->dev, "ipc error during adc read\n"); - return err; -} - -/* PENDET interrupt handler function for NEC and MAXIM */ -static void pmic12_pendet(void *data) -{ - unsigned int touched; - struct mrstouch_dev *tsdev = (struct mrstouch_dev *)data; - - /* read touch screen channels till pen removed */ - do { - touched = mrstouch_adc_read(tsdev); - } while (touched > TOUCH_PRESSURE); -} - -/* Handler to process PENDET interrupt */ -int mrstouch_pendet(void *data) -{ - struct mrstouch_dev *tsdev = (struct mrstouch_dev *)data; - while (1) { - /* Wait for PENDET interrupt */ - if (mutex_lock_interruptible(&tsdev->lock)) { - msleep(WAIT_ADC_COMPLETION); - continue; - } - - if (tsdev->busy) - return 0; - - tsdev->busy = true; - - if (tsdev->vendor == PMIC_VENDOR_NEC || - tsdev->vendor == PMIC_VENDOR_MAXIM) { - /* PENDET must be disabled in NEC before reading ADC */ - pendet_enable(tsdev,false); /* Disbale PENDET */ - pmic12_pendet(tsdev); - pendet_enable(tsdev, true); /*Enable PENDET */ - } else if (tsdev->vendor == PMIC_VENDOR_FS) { - pendet_umask(); /* Stop ADC */ - pmic0_pendet(tsdev); - pendet_mask(); /* Stop ADC */ - } else - dev_err(&tsdev->spi->dev, "Unsupported touchscreen: %d\n", - tsdev->vendor); - - tsdev->busy = false; - - } - return 0; -} - -/* PENDET interrupt handler */ -static irqreturn_t pendet_intr_handler(int irq, void *handle) -{ - struct mrstouch_dev *tsdev = (struct mrstouch_dev *)handle; - - mutex_unlock(&tsdev->lock); - return IRQ_HANDLED; -} - -/* Intializes input device and registers with input subsystem */ -static int ts_input_dev_init(struct mrstouch_dev *tsdev, struct spi_device *spi) -{ - int err = 0; - - mrstouch_debug("%s", __func__); - - tsdev->input = input_allocate_device(); - if (!tsdev->input) { - dev_err(&tsdev->spi->dev, "Unable to allocate input device.\n"); - return -EINVAL; - } - - tsdev->input->name = "mrst_touchscreen"; - snprintf(tsdev->phys, sizeof(tsdev->phys), - "%s/input0", dev_name(&spi->dev)); - tsdev->input->phys = tsdev->phys; - tsdev->input->dev.parent = &spi->dev; - - tsdev->input->id.vendor = tsdev->vendor; - tsdev->input->id.version = tsdev->rev; - - tsdev->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - tsdev->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); - - input_set_abs_params(tsdev->input, ABS_X, MIN_X, MIN_Y, 0, 0); - input_set_abs_params(tsdev->input, ABS_Y, MIN_X, MIN_Y, 0, 0); - - err = input_register_device(tsdev->input); - if (err) { - dev_err(&tsdev->spi->dev, "unable to register input device\n"); - input_free_device(tsdev->input); - return err; - } - - mrstouch_debug("%s", "mrstouch initialized"); - - return 0; - -} - -/* Probe function for touch screen driver */ -static int __devinit mrstouch_probe(struct spi_device *mrstouch_spi) -{ - int err; - unsigned int myirq; - struct mrstouch_dev *tsdev; - - mrstouch_debug("%s(%p)", __func__, mrstouch_spi); - - mrstouchdevp = NULL; - myirq = mrstouch_spi->irq; - - if (!mrstouch_spi->irq) { - dev_err(&mrstouch_spi->dev, "no interrupt assigned\n"); - return -EINVAL; - } - - tsdev = kzalloc(sizeof(struct mrstouch_dev), GFP_KERNEL); - if (!tsdev) { - dev_err(&mrstouch_spi->dev, "unable to allocate memory\n"); - return -ENOMEM; - } - - tsdev->irq = myirq; - mrstouchdevp = tsdev; - - err = mrstouch_adc_init(tsdev); - if (err) { - dev_err(&mrstouch_spi->dev, "ADC init failed\n"); - goto mrstouch_err_free_mem; - } - - dev_set_drvdata(&mrstouch_spi->dev, tsdev); - tsdev->spi = mrstouch_spi; - - err = ts_input_dev_init(tsdev, mrstouch_spi); - if (err) { - dev_err(&tsdev->spi->dev, "ts_input_dev_init failed"); - goto mrstouch_err_free_mem; - } - - mutex_init(&tsdev->lock); - mutex_lock(&tsdev->lock) - - mrstouch_debug("Requesting IRQ-%d", myirq); - err = request_irq(myirq, pendet_intr_handler, - 0, "mrstouch", tsdev); - if (err) { - dev_err(&tsdev->spi->dev, "unable to allocate irq\n"); - goto mrstouch_err_free_mem; - } - - tsdev->pendet_thrd = kthread_run(mrstouch_pendet, - (void *)tsdev, "pendet handler"); - if (IS_ERR(tsdev->pendet_thrd)) { - dev_err(&tsdev->spi->dev, "kthread_run failed\n"); - err = PTR_ERR(tsdev->pendet_thrd); - goto mrstouch_err_free_mem; - } - mrstouch_debug("%s", "Driver initialized"); - return 0; - -mrstouch_err_free_mem: - kfree(tsdev); - return err; -} - -static int mrstouch_suspend(struct spi_device *spi, pm_message_t msg) -{ - mrstouch_debug("%s", __func__); - mrstouchdevp->suspended = 1; - return 0; -} - -static int mrstouch_resume(struct spi_device *spi) -{ - mrstouch_debug("%s", __func__); - mrstouchdevp->suspended = 0; - return 0; -} - -static int mrstouch_remove(struct spi_device *spi) -{ - mrstouch_debug("%s", __func__); - free_irq(mrstouchdevp->irq, mrstouchdevp); - input_unregister_device(mrstouchdevp->input); - input_free_device(mrstouchdevp->input); - if (mrstouchdevp->pendet_thrd) - kthread_stop(mrstouchdevp->pendet_thrd); - kfree(mrstouchdevp); - return 0; -} - -static struct spi_driver mrstouch_driver = { - .driver = { - .name = "pmic_touch", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - .probe = mrstouch_probe, - .suspend = mrstouch_suspend, - .resume = mrstouch_resume, - .remove = mrstouch_remove, -}; - -static int __init mrstouch_module_init(void) -{ - int err; - - mrstouch_debug("%s", __func__); - err = spi_register_driver(&mrstouch_driver); - if (err) { - mrstouch_debug("%s(%d)", "SPI PENDET failed", err); - return -1; - } - - return 0; -} - -static void __exit mrstouch_module_exit(void) -{ - mrstouch_debug("%s", __func__); - spi_unregister_driver(&mrstouch_driver); - return; -} - -module_init(mrstouch_module_init); -module_exit(mrstouch_module_exit); - -MODULE_AUTHOR("Sreedhara Murthy. D.S, sreedhara.ds@intel.com"); -MODULE_DESCRIPTION("Intel Moorestown Resistive Touch Screen Driver"); -MODULE_LICENSE("GPL"); diff --git a/include/linux/gameport.h b/include/linux/gameport.h index 361d1cc288d0..b65a6f472775 100644 --- a/include/linux/gameport.h +++ b/include/linux/gameport.h @@ -53,9 +53,7 @@ struct gameport { #define to_gameport_port(d) container_of(d, struct gameport, dev) struct gameport_driver { - - void *private; - char *description; + const char *description; int (*connect)(struct gameport *, struct gameport_driver *drv); int (*reconnect)(struct gameport *); diff --git a/include/linux/input.h b/include/linux/input.h index d6ae1761be97..51af441f3a21 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -34,7 +34,7 @@ struct input_event { * Protocol version. */ -#define EV_VERSION 0x010000 +#define EV_VERSION 0x010001 /* * IOCTLs (0x00 - 0x7f) @@ -56,25 +56,50 @@ struct input_absinfo { __s32 resolution; }; +/** + * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls + * @scancode: scancode represented in machine-endian form. + * @len: length of the scancode that resides in @scancode buffer. + * @index: index in the keymap, may be used instead of scancode + * @flags: allows to specify how kernel should handle the request. For + * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel + * should perform lookup in keymap by @index instead of @scancode + * @keycode: key code assigned to this scancode + * + * The structure is used to retrieve and modify keymap data. Users have + * option of performing lookup either by @scancode itself or by @index + * in keymap entry. EVIOCGKEYCODE will also return scancode or index + * (depending on which element was used to perform lookup). + */ +struct input_keymap_entry { +#define INPUT_KEYMAP_BY_INDEX (1 << 0) + __u8 flags; + __u8 len; + __u16 index; + __u32 keycode; + __u8 scancode[32]; +}; + #define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */ #define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */ #define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */ #define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */ -#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */ -#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */ + +#define EVIOCGKEYCODE _IOR('E', 0x04, struct input_keymap_entry) /* get keycode */ +#define EVIOCSKEYCODE _IOW('E', 0x04, struct input_keymap_entry) /* set keycode */ #define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ #define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ #define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ -#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global keystate */ +#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */ #define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ #define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ #define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */ #define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + ev, len) /* get event bits */ -#define EVIOCGABS(abs) _IOR('E', 0x40 + abs, struct input_absinfo) /* get abs value/limits */ -#define EVIOCSABS(abs) _IOW('E', 0xc0 + abs, struct input_absinfo) /* set abs value/limits */ +#define EVIOCGABS(abs) _IOR('E', 0x40 + abs, struct input_absinfo) /* get abs value/limits */ +#define EVIOCSABS(abs) _IOW('E', 0xc0 + abs, struct input_absinfo) /* set abs value/limits */ #define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */ #define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */ @@ -1088,13 +1113,13 @@ struct input_mt_slot { * @keycodemax: size of keycode table * @keycodesize: size of elements in keycode table * @keycode: map of scancodes to keycodes for this device + * @getkeycode: optional legacy method to retrieve current keymap. * @setkeycode: optional method to alter current keymap, used to implement * sparse keymaps. If not supplied default mechanism will be used. * The method is being called while holding event_lock and thus must * not sleep - * @getkeycode: optional method to retrieve current keymap. If not supplied - * default mechanism will be used. The method is being called while - * holding event_lock and thus must not sleep + * @getkeycode_new: transition method + * @setkeycode_new: transition method * @ff: force feedback structure associated with the device if device * supports force feedback effects * @repeat_key: stores key code of the last key pressed; used to implement @@ -1168,10 +1193,16 @@ struct input_dev { unsigned int keycodemax; unsigned int keycodesize; void *keycode; + int (*setkeycode)(struct input_dev *dev, unsigned int scancode, unsigned int keycode); int (*getkeycode)(struct input_dev *dev, unsigned int scancode, unsigned int *keycode); + int (*setkeycode_new)(struct input_dev *dev, + const struct input_keymap_entry *ke, + unsigned int *old_keycode); + int (*getkeycode_new)(struct input_dev *dev, + struct input_keymap_entry *ke); struct ff_device *ff; @@ -1478,10 +1509,12 @@ INPUT_GENERATE_ABS_ACCESSORS(fuzz, fuzz) INPUT_GENERATE_ABS_ACCESSORS(flat, flat) INPUT_GENERATE_ABS_ACCESSORS(res, resolution) -int input_get_keycode(struct input_dev *dev, - unsigned int scancode, unsigned int *keycode); +int input_scancode_to_scalar(const struct input_keymap_entry *ke, + unsigned int *scancode); + +int input_get_keycode(struct input_dev *dev, struct input_keymap_entry *ke); int input_set_keycode(struct input_dev *dev, - unsigned int scancode, unsigned int keycode); + const struct input_keymap_entry *ke); extern struct class input_class; diff --git a/include/linux/input/bu21013.h b/include/linux/input/bu21013.h new file mode 100644 index 000000000000..e470d387dd49 --- /dev/null +++ b/include/linux/input/bu21013.h @@ -0,0 +1,44 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson + * License terms:GNU General Public License (GPL) version 2 + */ + +#ifndef _BU21013_H +#define _BU21013_H + +/** + * struct bu21013_platform_device - Handle the platform data + * @cs_en: pointer to the cs enable function + * @cs_dis: pointer to the cs disable function + * @irq_read_val: pointer to read the pen irq value function + * @x_max_res: xmax resolution + * @y_max_res: ymax resolution + * @touch_x_max: touch x max + * @touch_y_max: touch y max + * @cs_pin: chip select pin + * @irq: irq pin + * @ext_clk: external clock flag + * @x_flip: x flip flag + * @y_flip: y flip flag + * @wakeup: wakeup flag + * + * This is used to handle the platform data + */ +struct bu21013_platform_device { + int (*cs_en)(int reset_pin); + int (*cs_dis)(int reset_pin); + int (*irq_read_val)(void); + int x_max_res; + int y_max_res; + int touch_x_max; + int touch_y_max; + unsigned int cs_pin; + unsigned int irq; + bool ext_clk; + bool x_flip; + bool y_flip; + bool wakeup; +}; + +#endif diff --git a/include/linux/serio.h b/include/linux/serio.h index b5552568178d..e26f4788845f 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -41,7 +41,9 @@ struct serio { int (*start)(struct serio *); void (*stop)(struct serio *); - struct serio *parent, *child; + struct serio *parent; + struct list_head child_node; /* Entry in parent->children list */ + struct list_head children; unsigned int depth; /* level of nesting in serio hierarchy */ struct serio_driver *drv; /* accessed from interrupt, must be protected by serio->lock and serio->sem */ @@ -54,10 +56,9 @@ struct serio { #define to_serio_port(d) container_of(d, struct serio, dev) struct serio_driver { - void *private; - char *description; + const char *description; - struct serio_device_id *id_table; + const struct serio_device_id *id_table; bool manual_bind; void (*write_wakeup)(struct serio *); @@ -197,5 +198,6 @@ static inline void serio_continue_rx(struct serio *serio) #define SERIO_W8001 0x39 #define SERIO_DYNAPRO 0x3a #define SERIO_HAMPSHIRE 0x3b +#define SERIO_PS2MULT 0x3c #endif diff --git a/include/media/rc-map.h b/include/media/rc-map.h index a9c041d49662..9b201ec8dc7f 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -35,7 +35,7 @@ struct ir_scancode_table { unsigned int len; /* Used number of entries */ unsigned int alloc; /* Size of *scan in bytes */ u64 ir_type; - char *name; + const char *name; spinlock_t lock; }; |