diff options
29 files changed, 36 insertions, 36 deletions
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt index fd588ff0e296..5eb279a48fa4 100644 --- a/Documentation/cgroups/cgroups.txt +++ b/Documentation/cgroups/cgroups.txt @@ -573,7 +573,7 @@ void cancel_attach(struct cgroup_subsys *ss, struct cgroup *cgrp, Called when a task attach operation has failed after can_attach() has succeeded. A subsystem whose can_attach() has some side-effects should provide this -function, so that the subsytem can implement a rollback. If not, not necessary. +function, so that the subsystem can implement a rollback. If not, not necessary. This will be called only about subsystems whose can_attach() operation have succeeded. diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt index 49efae703979..b2cb16ebcb16 100644 --- a/Documentation/kbuild/kconfig.txt +++ b/Documentation/kbuild/kconfig.txt @@ -96,7 +96,7 @@ Environment variables for 'silentoldconfig' KCONFIG_NOSILENTUPDATE -------------------------------------------------- If this variable has a non-blank value, it prevents silent kernel -config udpates (requires explicit updates). +config updates (requires explicit updates). KCONFIG_AUTOCONFIG -------------------------------------------------- diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt index 5d8bc2cd250c..c1a1fd636bf9 100644 --- a/Documentation/sysfs-rules.txt +++ b/Documentation/sysfs-rules.txt @@ -125,7 +125,7 @@ versions of the sysfs interface. - Block The converted block subsystem at /sys/class/block or /sys/subsystem/block will contain the links for disks and partitions - at the same level, never in a hierarchy. Assuming the block subsytem to + at the same level, never in a hierarchy. Assuming the block subsystem to contain only disks and not partition devices in the same flat list is a bug in the application. diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt index 02ac6ed38b2d..b22000dbc57d 100644 --- a/Documentation/trace/events.txt +++ b/Documentation/trace/events.txt @@ -238,7 +238,7 @@ subsystem's filter file. For convenience, filters for every event in a subsystem can be set or cleared as a group by writing a filter expression into the filter file -at the root of the subsytem. Note however, that if a filter for any +at the root of the subsystem. Note however, that if a filter for any event within the subsystem lacks a field specified in the subsystem filter, or if the filter can't be applied for any other reason, the filter for that event will retain its previous setting. This can @@ -250,7 +250,7 @@ fields can be guaranteed to propagate successfully to all events. Here are a few subsystem filter examples that also illustrate the above points: -Clear the filters on all events in the sched subsytem: +Clear the filters on all events in the sched subsystem: # cd /sys/kernel/debug/tracing/events/sched # echo 0 > filter @@ -260,7 +260,7 @@ none none Set a filter using only common fields for all events in the sched -subsytem (all events end up with the same filter): +subsystem (all events end up with the same filter): # cd /sys/kernel/debug/tracing/events/sched # echo common_pid == 0 > filter @@ -270,7 +270,7 @@ common_pid == 0 common_pid == 0 Attempt to set a filter using a non-common field for all events in the -sched subsytem (all events but those that have a prev_pid field retain +sched subsystem (all events but those that have a prev_pid field retain their old filters): # cd /sys/kernel/debug/tracing/events/sched diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 8e6d8665f0ae..f92531fbd501 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -1405,7 +1405,7 @@ acpi_os_invalidate_address( switch (space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: case ACPI_ADR_SPACE_SYSTEM_MEMORY: - /* Only interference checks against SystemIO and SytemMemory + /* Only interference checks against SystemIO and SystemMemory are needed */ res.start = address; res.end = address + length - 1; @@ -1457,7 +1457,7 @@ acpi_os_validate_address ( switch (space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: case ACPI_ADR_SPACE_SYSTEM_MEMORY: - /* Only interference checks against SystemIO and SytemMemory + /* Only interference checks against SystemIO and SystemMemory are needed */ res = kzalloc(sizeof(struct acpi_res_list), GFP_KERNEL); if (!res) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index c33806654e46..b1cb8af6af1c 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -43,7 +43,7 @@ * driver the list of errata that are relevant is below, going back to * PIIX4. Older device documentation is now a bit tricky to find. * - * The chipsets all follow very much the same design. The orginal Triton + * The chipsets all follow very much the same design. The original Triton * series chipsets do _not_ support independant device timings, but this * is fixed in Triton II. With the odd mobile exception the chips then * change little except in gaining more modes until SATA arrives. This diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 75dc6988cffd..8e180a27be7c 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -1342,7 +1342,7 @@ static void bus_reset_tasklet(unsigned long data) * was set up before this reset, the old one is now no longer * in use and we can free it. Update the config rom pointers * to point to the current config rom and clear the - * next_config_rom pointer so a new udpate can take place. + * next_config_rom pointer so a new update can take place. */ if (ohci->next_config_rom != NULL) { diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c index 8417cc4c43f1..8475d58f2a33 100644 --- a/drivers/gpu/drm/drm_bufs.c +++ b/drivers/gpu/drm/drm_bufs.c @@ -960,7 +960,7 @@ int drm_addbufs_pci(struct drm_device * dev, struct drm_buf_desc * request) dma->buflist[i + dma->buf_count] = &entry->buflist[i]; } - /* No allocations failed, so now we can replace the orginal pagelist + /* No allocations failed, so now we can replace the original pagelist * with the new one. */ if (dma->page_count) { diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index 37d12e5efa49..1d7aea132a09 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -1474,7 +1474,7 @@ static void ipath_ht_quiet_serdes(struct ipath_devdata *dd) /** * ipath_pe_put_tid - write a TID in chip * @dd: the infinipath device - * @tidptr: pointer to the expected TID (in chip) to udpate + * @tidptr: pointer to the expected TID (in chip) to update * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing * diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c index fbf8c5379ea8..4b4a30b0dabd 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -1328,7 +1328,7 @@ bail: /** * ipath_pe_put_tid - write a TID in chip * @dd: the infinipath device - * @tidptr: pointer to the expected TID (in chip) to udpate + * @tidptr: pointer to the expected TID (in chip) to update * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing * @@ -1394,7 +1394,7 @@ static void ipath_pe_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr, /** * ipath_pe_put_tid_2 - write a TID in chip, Revision 2 or higher * @dd: the infinipath device - * @tidptr: pointer to the expected TID (in chip) to udpate + * @tidptr: pointer to the expected TID (in chip) to update * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing * diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c index a805402dd4ae..34b778ed97fc 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba7220.c +++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c @@ -1738,7 +1738,7 @@ bail: /** * ipath_7220_put_tid - write a TID to the chip * @dd: the infinipath device - * @tidptr: pointer to the expected TID (in chip) to udpate + * @tidptr: pointer to the expected TID (in chip) to update * @tidtype: 0 for eager, 1 for expected * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing * diff --git a/drivers/isdn/hisax/hfc4s8s_l1.c b/drivers/isdn/hisax/hfc4s8s_l1.c index ab98e135bcbb..7ea0d07836d6 100644 --- a/drivers/isdn/hisax/hfc4s8s_l1.c +++ b/drivers/isdn/hisax/hfc4s8s_l1.c @@ -309,7 +309,7 @@ wait_busy(hfc4s8s_hw * a) /******************************************************/ /* function to read critical counter registers that */ -/* may be udpated by the chip during read */ +/* may be updated by the chip during read */ /******************************************************/ static u_char Read_hfc8_stable(hfc4s8s_hw * hw, int reg) diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c index 565d5b2adc95..129cda737880 100644 --- a/drivers/macintosh/windfarm_pm81.c +++ b/drivers/macintosh/windfarm_pm81.c @@ -188,7 +188,7 @@ struct wf_smu_sys_fans_state { }; /* - * Configs for SMU Sytem Fan control loop + * Configs for SMU System Fan control loop */ static struct wf_smu_sys_fans_param wf_smu_sys_all_params[] = { /* Model ID 2 */ diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c index d14bd227b502..93c21ddd0b77 100644 --- a/drivers/media/dvb/dvb-usb/friio-fe.c +++ b/drivers/media/dvb/dvb-usb/friio-fe.c @@ -300,7 +300,7 @@ static int jdvbt90502_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { /** - * NOTE: ignore all the paramters except frequency. + * NOTE: ignore all the parameters except frequency. * others should be fixed to the proper value for ISDB-T, * but don't check here. */ diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index 4fd1d8b38788..eb175980a8e0 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -737,7 +737,7 @@ static void smsc911x_phy_adjust_link(struct net_device *dev) SMSC_TRACE(HW, "configuring for carrier OK"); if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) && (!pdata->using_extphy)) { - /* Restore orginal GPIO configuration */ + /* Restore original GPIO configuration */ pdata->gpio_setting = pdata->gpio_orig_setting; smsc911x_reg_write(pdata, GPIO_CFG, pdata->gpio_setting); @@ -751,7 +751,7 @@ static void smsc911x_phy_adjust_link(struct net_device *dev) if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_) && (!pdata->using_extphy)) { /* Force 10/100 LED off, after saving - * orginal GPIO configuration */ + * original GPIO configuration */ pdata->gpio_orig_setting = pdata->gpio_setting; pdata->gpio_setting &= ~GPIO_CFG_LED1_EN_; diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index f184d1d2ecbe..6644337d63d6 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -848,7 +848,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_disable_device; } - /* Check for the proper subsytem ID's + /* Check for the proper subsystem ID's * Intel uses a different SSID programming model than Compaq. * For Intel, each SSID bit identifies a PHP capability. * Also Intel HPC's may have RID=0. diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index cb1dd5f4988c..ddd55dc927f7 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1506,7 +1506,7 @@ int pci_prepare_to_sleep(struct pci_dev *dev) * pci_back_from_sleep - turn PCI device on during system-wide transition into working state * @dev: Device to handle. * - * Disable device's sytem wake-up capability and put it into D0. + * Disable device's system wake-up capability and put it into D0. */ int pci_back_from_sleep(struct pci_dev *dev) { diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c index 3cbaf1811bd0..d37c445f0eda 100644 --- a/drivers/ps3/ps3-sys-manager.c +++ b/drivers/ps3/ps3-sys-manager.c @@ -119,7 +119,7 @@ enum ps3_sys_manager_service_id { * enum ps3_sys_manager_attr - Notification attribute (bit position mask). * @PS3_SM_ATTR_POWER: Power button. * @PS3_SM_ATTR_RESET: Reset button, not available on retail console. - * @PS3_SM_ATTR_THERMAL: Sytem thermal alert. + * @PS3_SM_ATTR_THERMAL: System thermal alert. * @PS3_SM_ATTR_CONTROLLER: Remote controller event. * @PS3_SM_ATTR_ALL: Logical OR of all. * diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index c7bbe30010f7..7461f5bb2bd8 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1538,7 +1538,7 @@ EXPORT_SYMBOL_GPL(regulator_count_voltages); * Context: can sleep * * Returns a voltage that can be passed to @regulator_set_voltage(), - * zero if this selector code can't be used on this sytem, or a + * zero if this selector code can't be used on this system, or a * negative errno. */ int regulator_list_voltage(struct regulator *regulator, unsigned selector) diff --git a/drivers/s390/char/sclp_cpi_sys.c b/drivers/s390/char/sclp_cpi_sys.c index 62c2647f37f4..4a51e3f09689 100644 --- a/drivers/s390/char/sclp_cpi_sys.c +++ b/drivers/s390/char/sclp_cpi_sys.c @@ -102,7 +102,7 @@ static struct sclp_req *cpi_prepare_req(void) /* set system name */ set_data(evb->system_name, system_name); - /* set sytem level */ + /* set system level */ evb->system_level = system_level; /* set sysplex name */ diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_cee.h b/drivers/scsi/bfa/include/defs/bfa_defs_cee.h index 520a22f52dd1..6217eec8c604 100644 --- a/drivers/scsi/bfa/include/defs/bfa_defs_cee.h +++ b/drivers/scsi/bfa/include/defs/bfa_defs_cee.h @@ -54,7 +54,7 @@ struct bfa_cee_lldp_str_s { }; -/* LLDP paramters */ +/* LLDP parameters */ struct bfa_cee_lldp_cfg_s { struct bfa_cee_lldp_str_s chassis_id; struct bfa_cee_lldp_str_s port_id; diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_status.h b/drivers/scsi/bfa/include/defs/bfa_defs_status.h index cdceaeb9f4b8..03ce0331eb48 100644 --- a/drivers/scsi/bfa/include/defs/bfa_defs_status.h +++ b/drivers/scsi/bfa/include/defs/bfa_defs_status.h @@ -223,9 +223,9 @@ enum bfa_status { BFA_STATUS_IM_PVID_NON_ZERO = 140, /* Port VLAN ID (PVID) is Set to * Non-Zero Value */ BFA_STATUS_IM_INETCFG_LOCK_FAILED = 141, /* Acquiring Network - * Subsytem Lock Failed.Please + * Subsystem Lock Failed.Please * try after some time */ - BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /* Acquiring Network Subsytem + BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /* Acquiring Network Subsystem * handle Failed. Please try * after some time */ BFA_STATUS_IM_NOT_BOUND = 143, /* Brocade 10G Ethernet Service is not diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c index 4f0cc9d457e0..56efdfe1428d 100644 --- a/drivers/spi/spi_mpc8xxx.c +++ b/drivers/spi/spi_mpc8xxx.c @@ -639,7 +639,7 @@ static int mpc8xxx_spi_setup(struct spi_device *spi) } mpc8xxx_spi = spi_master_get_devdata(spi->master); - hw_mode = cs->hw_mode; /* Save orginal settings */ + hw_mode = cs->hw_mode; /* Save original settings */ cs->hw_mode = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode); /* mask out bits we are going to set */ cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 625447f645d9..7210c0d72e43 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -654,7 +654,7 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev, /* we use the subsystem vendor/device id as the virtio vendor/device * id. this allows us to use the same PCI vendor/device id for all * virtio devices and to identify the particular virtio driver by - * the subsytem ids */ + * the subsystem ids */ vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor; vp_dev->vdev.id.device = pci_dev->subsystem_device; diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c index d9b031cf69f5..d13b93043b04 100644 --- a/fs/jfs/jfs_dmap.c +++ b/fs/jfs/jfs_dmap.c @@ -2437,7 +2437,7 @@ dbAdjCtl(struct bmap * bmp, s64 blkno, int newval, int alloc, int level) /* check if this is a control page update for an allocation. * if so, update the leaf to reflect the new leaf value using - * dbSplit(); otherwise (deallocation), use dbJoin() to udpate + * dbSplit(); otherwise (deallocation), use dbJoin() to update * the leaf with the new value. in addition to updating the * leaf, dbSplit() will also split the binary buddy system of * the leaves, if required, and bubble new values within the diff --git a/kernel/cgroup.c b/kernel/cgroup.c index ef909a329750..a3b0f24bddbb 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -3610,7 +3610,7 @@ static void __init cgroup_init_subsys(struct cgroup_subsys *ss) * @ss: the subsystem to load * * This function should be called in a modular subsystem's initcall. If the - * subsytem is built as a module, it will be assigned a new subsys_id and set + * subsystem is built as a module, it will be assigned a new subsys_id and set * up for use. If the subsystem is built-in anyway, work is delegated to the * simpler cgroup_init_subsys. */ diff --git a/mm/page_alloc.c b/mm/page_alloc.c index d03c946d5566..a6326c71b663 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2579,7 +2579,7 @@ static int default_zonelist_order(void) struct zone *z; int average_size; /* - * ZONE_DMA and ZONE_DMA32 can be very small area in the sytem. + * ZONE_DMA and ZONE_DMA32 can be very small area in the system. * If they are really small and used heavily, the system can fall * into OOM very easily. * This function detect ZONE_DMA/DMA32 size and confgigures zone order. diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c index e978c7136c97..2609e445fe7d 100644 --- a/net/wimax/op-rfkill.c +++ b/net/wimax/op-rfkill.c @@ -43,7 +43,7 @@ * wimax_rfkill() Kernel calling wimax_rfkill() * __wimax_rf_toggle_radio() * - * wimax_rfkill_set_radio_block() RF-Kill subsytem calling + * wimax_rfkill_set_radio_block() RF-Kill subsystem calling * __wimax_rf_toggle_radio() * * __wimax_rf_toggle_radio() diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index f18bd6207c50..66c7fb3ced3e 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -1787,7 +1787,7 @@ int __devinit snd_emu10k1_create(struct snd_card *card, else if (subsystem) snd_printdd("Sound card name = %s, " "vendor = 0x%x, device = 0x%x, subsystem = 0x%x. " - "Forced to subsytem = 0x%x\n", c->name, + "Forced to subsystem = 0x%x\n", c->name, pci->vendor, pci->device, emu->serial, c->subsystem); else snd_printdd("Sound card name = %s, " |