diff options
| -rw-r--r-- | arch/blackfin/mach-bf609/boards/ezkit.c | 101 |
1 files changed, 90 insertions, 11 deletions
diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c index 0d8aa11b8950..9f9f597dc1be 100644 --- a/arch/blackfin/mach-bf609/boards/ezkit.c +++ b/arch/blackfin/mach-bf609/boards/ezkit.c @@ -974,17 +974,17 @@ static struct adv7842_platform_data adv7842_data = { .prim_mode = ADV7842_PRIM_MODE_SDP, .vid_std_select = ADV7842_SDP_VID_STD_CVBS_SD_4x1, .inp_color_space = ADV7842_INP_COLOR_SPACE_AUTO, - .i2c_sdp_io = 0x30, - .i2c_sdp = 0x31, - .i2c_cp = 0x32, - .i2c_vdp = 0x33, - .i2c_afe = 0x34, - .i2c_hdmi = 0x35, - .i2c_repeater = 0x36, - .i2c_edid = 0x37, - .i2c_infoframe = 0x39, - .i2c_cec = 0x3a, - .i2c_avlink = 0x3b, + .i2c_sdp_io = 0x40, + .i2c_sdp = 0x41, + .i2c_cp = 0x42, + .i2c_vdp = 0x43, + .i2c_afe = 0x44, + .i2c_hdmi = 0x45, + .i2c_repeater = 0x46, + .i2c_edid = 0x47, + .i2c_infoframe = 0x48, + .i2c_cec = 0x49, + .i2c_avlink = 0x4a, .i2c_ex = 0x26, }; @@ -1013,6 +1013,80 @@ static struct platform_device bfin_capture_device = { }; #endif +#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \ + || defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE) +#include <linux/videodev2.h> +#include <media/blackfin/bfin_display.h> +#include <media/blackfin/ppi.h> + +static const unsigned short ppi_req_disp[] = { + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, + P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, + P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11, + P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, + 0, +}; + +static const struct ppi_info ppi_info = { + .type = PPI_TYPE_EPPI3, + .dma_ch = CH_EPPI0_CH0, + .irq_err = IRQ_EPPI0_STAT, + .base = (void __iomem *)EPPI0_STAT, + .pin_req = ppi_req_disp, +}; + +#if defined(CONFIG_VIDEO_ADV7511) \ + || defined(CONFIG_VIDEO_ADV7511_MODULE) +#include <media/adv7511.h> + +static struct v4l2_output adv7511_outputs[] = { + { + .index = 0, + .name = "HDMI", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_OUT_CAP_CUSTOM_TIMINGS, + }, +}; + +static struct disp_route adv7511_routes[] = { + { + .output = 0, + }, +}; + +static struct adv7511_platform_data adv7511_data = { + .edid_addr = 0x7e, + .i2c_ex = 0x25, +}; + +static struct bfin_display_config bfin_display_data = { + .card_name = "BF609", + .outputs = adv7511_outputs, + .num_outputs = ARRAY_SIZE(adv7511_outputs), + .routes = adv7511_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "adv7511", + .addr = 0x39, + .platform_data = (void *)&adv7511_data, + }, + .ppi_info = &ppi_info, + .ppi_control = (EPPI_CTL_SPLTWRD | PACK_EN | DLEN_16 + | EPPI_CTL_FS1LO_FS2LO | EPPI_CTL_POLC3 + | EPPI_CTL_IFSGEN | EPPI_CTL_SYNC2 + | EPPI_CTL_NON656 | EPPI_CTL_DIR), +}; +#endif + +static struct platform_device bfin_display_device = { + .name = "bfin_display", + .dev = { + .platform_data = &bfin_display_data, + }, +}; +#endif + #if defined(CONFIG_BFIN_CRC) #define BFIN_CRC_NAME "bfin-crc" @@ -1477,6 +1551,11 @@ static struct platform_device *ezkit_devices[] __initdata = { || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) &bfin_capture_device, #endif +#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \ + || defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE) + &bfin_display_device, +#endif + }; static int __init ezkit_init(void) |