summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/acpi/enumeration.txt6
-rw-r--r--Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt6
-rw-r--r--Documentation/kernel-parameters.txt2
-rw-r--r--drivers/acpi/video.c10
-rw-r--r--drivers/cpufreq/Kconfig.arm3
-rw-r--r--drivers/cpufreq/cpufreq-cpu0.c7
-rw-r--r--drivers/cpufreq/cpufreq.c6
-rw-r--r--drivers/cpufreq/sa1110-cpufreq.c2
-rw-r--r--include/linux/cpufreq.h4
-rw-r--r--kernel/power/process.c1
-rw-r--r--kernel/power/suspend.c4
11 files changed, 28 insertions, 23 deletions
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
index fd786ea13a1f..e182be5e3c83 100644
--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@@ -60,12 +60,6 @@ If the driver needs to perform more complex initialization like getting and
configuring GPIOs it can get its ACPI handle and extract this information
from ACPI tables.
-Currently the kernel is not able to automatically determine from which ACPI
-device it should make the corresponding platform device so we need to add
-the ACPI device explicitly to acpi_platform_device_ids list defined in
-drivers/acpi/acpi_platform.c. This limitation is only for the platform
-devices, SPI and I2C devices are created automatically as described below.
-
DMA support
~~~~~~~~~~~
DMA controllers enumerated via ACPI should be registered in the system to
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
index f055515d2b62..366690cb86a3 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
@@ -8,10 +8,12 @@ Both required and optional properties listed below must be defined
under node /cpus/cpu@0.
Required properties:
-- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
- for details
+- None
Optional properties:
+- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for
+ details. OPPs *must* be supplied either via DT, i.e. this property, or
+ populated at runtime.
- clock-latency: Specify the possible maximum transition latency for clock,
in unit of nanoseconds.
- voltage-tolerance: Specify the CPU voltage tolerance in percentage.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c1b9aa8c5a52..e332e718cad6 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3526,7 +3526,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
the allocated input device; If set to 0, video driver
will only send out the event without touching backlight
brightness level.
- default: 0
+ default: 1
virtio_mmio.device=
[VMMIO] Memory mapped virtio (platform) device.
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 071c1dfb93f3..350d52a8f781 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -68,7 +68,7 @@ MODULE_AUTHOR("Bruno Ducrot");
MODULE_DESCRIPTION("ACPI Video Driver");
MODULE_LICENSE("GPL");
-static bool brightness_switch_enabled;
+static bool brightness_switch_enabled = 1;
module_param(brightness_switch_enabled, bool, 0644);
/*
@@ -581,6 +581,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
},
{
.callback = video_set_use_native_backlight,
+ .ident = "HP ProBook 4540s",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "HP ProBook 4540s"),
+ },
+ },
+ {
+ .callback = video_set_use_native_backlight,
.ident = "HP ProBook 2013 models",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index ebac67115009..7364a538e056 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -104,6 +104,7 @@ config ARM_IMX6Q_CPUFREQ
tristate "Freescale i.MX6 cpufreq support"
depends on ARCH_MXC
depends on REGULATOR_ANATOP
+ select PM_OPP
help
This adds cpufreq driver support for Freescale i.MX6 series SoCs.
@@ -118,7 +119,7 @@ config ARM_INTEGRATOR
If in doubt, say Y.
config ARM_KIRKWOOD_CPUFREQ
- def_bool MACH_KIRKWOOD
+ def_bool ARCH_KIRKWOOD || MACH_KIRKWOOD
help
This adds the CPUFreq driver for Marvell Kirkwood
SoCs.
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index ee1ae303a07c..86beda9f950b 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -152,11 +152,8 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev)
goto out_put_reg;
}
- ret = of_init_opp_table(cpu_dev);
- if (ret) {
- pr_err("failed to init OPP table: %d\n", ret);
- goto out_put_clk;
- }
+ /* OPPs might be populated at runtime, don't check for error here */
+ of_init_opp_table(cpu_dev);
ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
if (ret) {
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 62259d27f03e..6f024852c6fb 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1153,10 +1153,12 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif)
* the creation of a brand new one. So we need to perform this update
* by invoking update_policy_cpu().
*/
- if (recover_policy && cpu != policy->cpu)
+ if (recover_policy && cpu != policy->cpu) {
update_policy_cpu(policy, cpu);
- else
+ WARN_ON(kobject_move(&policy->kobj, &dev->kobj));
+ } else {
policy->cpu = cpu;
+ }
cpumask_copy(policy->cpus, cpumask_of(cpu));
diff --git a/drivers/cpufreq/sa1110-cpufreq.c b/drivers/cpufreq/sa1110-cpufreq.c
index 546376719d8f..b5befc211172 100644
--- a/drivers/cpufreq/sa1110-cpufreq.c
+++ b/drivers/cpufreq/sa1110-cpufreq.c
@@ -349,7 +349,7 @@ static int __init sa1110_clk_init(void)
name = "K4S641632D";
if (machine_is_h3100())
name = "KM416S4030CT";
- if (machine_is_jornada720())
+ if (machine_is_jornada720() || machine_is_h3600())
name = "K4S281632B-1H";
if (machine_is_nanoengine())
name = "MT48LC8M16A2TG-75";
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index ec4112d257bc..8f8ae95c6e27 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -482,8 +482,8 @@ extern struct cpufreq_governor cpufreq_gov_conservative;
*********************************************************************/
/* Special Values of .frequency field */
-#define CPUFREQ_ENTRY_INVALID ~0
-#define CPUFREQ_TABLE_END ~1
+#define CPUFREQ_ENTRY_INVALID ~0u
+#define CPUFREQ_TABLE_END ~1u
/* Special Values of .flags field */
#define CPUFREQ_BOOST_FREQ (1 << 0)
diff --git a/kernel/power/process.c b/kernel/power/process.c
index 0ca8d83e2369..4ee194eb524b 100644
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -186,6 +186,7 @@ void thaw_processes(void)
printk("Restarting tasks ... ");
+ __usermodehelper_set_disable_depth(UMH_FREEZING);
thaw_workqueues();
read_lock(&tasklist_lock);
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index 4dd8822f732a..ed35a4790afe 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -306,7 +306,7 @@ int suspend_devices_and_enter(suspend_state_t state)
error = suspend_ops->begin(state);
if (error)
goto Close;
- } else if (state == PM_SUSPEND_FREEZE && freeze_ops->begin) {
+ } else if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->begin) {
error = freeze_ops->begin();
if (error)
goto Close;
@@ -335,7 +335,7 @@ int suspend_devices_and_enter(suspend_state_t state)
Close:
if (need_suspend_ops(state) && suspend_ops->end)
suspend_ops->end();
- else if (state == PM_SUSPEND_FREEZE && freeze_ops->end)
+ else if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->end)
freeze_ops->end();
return error;
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-15 01:07:15 +0000