diff options
-rw-r--r-- | arch/arm/mach-at91rm9200/devices.c | 22 | ||||
-rw-r--r-- | arch/avr32/mach-at32ap/at32ap7000.c | 4 | ||||
-rw-r--r-- | drivers/serial/atmel_serial.c | 14 | ||||
-rw-r--r-- | include/asm-arm/arch-at91rm9200/board.h | 4 | ||||
-rw-r--r-- | include/asm-arm/arch-at91rm9200/hardware.h | 2 | ||||
-rw-r--r-- | include/asm-avr32/arch-at32ap/board.h | 4 |
6 files changed, 25 insertions, 25 deletions
diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c index 28fd4b8f4742..5a3919f09d4d 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/devices.c @@ -558,7 +558,7 @@ static struct resource dbgu_resources[] = { }, }; -static struct at91_uart_data dbgu_data = { +static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ }; @@ -593,7 +593,7 @@ static struct resource uart0_resources[] = { }, }; -static struct at91_uart_data uart0_data = { +static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, }; @@ -635,7 +635,7 @@ static struct resource uart1_resources[] = { }, }; -static struct at91_uart_data uart1_data = { +static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, }; @@ -676,7 +676,7 @@ static struct resource uart2_resources[] = { }, }; -static struct at91_uart_data uart2_data = { +static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, }; @@ -711,7 +711,7 @@ static struct resource uart3_resources[] = { }, }; -static struct at91_uart_data uart3_data = { +static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, }; @@ -733,8 +733,8 @@ static inline void configure_usart3_pins(void) at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */ } -struct platform_device *at91_uarts[AT91_NR_UART]; /* the UARTs to use */ -struct platform_device *at91_default_console_device; /* the serial console device */ +struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_init_serial(struct at91_uart_config *config) { @@ -775,9 +775,9 @@ void __init at91_init_serial(struct at91_uart_config *config) } /* Set serial console device */ - if (config->console_tty < AT91_NR_UART) - at91_default_console_device = at91_uarts[config->console_tty]; - if (!at91_default_console_device) + if (config->console_tty < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[config->console_tty]; + if (!atmel_default_console_device) printk(KERN_INFO "AT91: No default serial console defined.\n"); } @@ -785,7 +785,7 @@ void __init at91_add_device_serial(void) { int i; - for (i = 0; i < AT91_NR_UART; i++) { + for (i = 0; i < ATMEL_MAX_UART; i++) { if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c index 842e7be7fb5e..05d1296bd7b2 100644 --- a/arch/avr32/mach-at32ap/at32ap7000.c +++ b/arch/avr32/mach-at32ap/at32ap7000.c @@ -615,11 +615,11 @@ struct platform_device *__init at32_add_device_usart(unsigned int id) return pdev; } -struct platform_device *at91_default_console_device; +struct platform_device *atmel_default_console_device; void __init at32_setup_serial_console(unsigned int usart_id) { - at91_default_console_device = setup_usart(usart_id); + atmel_default_console_device = setup_usart(usart_id); } /* -------------------------------------------------------------------- diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index f14a07ed60b8..65972ce63c7d 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -113,7 +113,7 @@ struct at91_uart_port { unsigned short suspended; /* is port suspended? */ }; -static struct at91_uart_port at91_ports[AT91_NR_UART]; +static struct at91_uart_port at91_ports[ATMEL_MAX_UART]; #ifdef SUPPORT_SYSRQ static struct console at91_console; @@ -682,7 +682,7 @@ static struct uart_ops at91_pops = { static void __devinit at91_init_port(struct at91_uart_port *at91_port, struct platform_device *pdev) { struct uart_port *port = &at91_port->uart; - struct at91_uart_data *data = pdev->dev.platform_data; + struct atmel_uart_data *data = pdev->dev.platform_data; port->iotype = UPIO_MEM; port->flags = UPF_BOOT_AUTOCONF; @@ -834,9 +834,9 @@ static struct console at91_console = { */ static int __init at91_console_init(void) { - if (at91_default_console_device) { - add_preferred_console(AT91_DEVICENAME, at91_default_console_device->id, NULL); - at91_init_port(&(at91_ports[at91_default_console_device->id]), at91_default_console_device); + if (atmel_default_console_device) { + add_preferred_console(AT91_DEVICENAME, atmel_default_console_device->id, NULL); + at91_init_port(&(at91_ports[atmel_default_console_device->id]), atmel_default_console_device); register_console(&at91_console); } @@ -849,7 +849,7 @@ console_initcall(at91_console_init); */ static int __init at91_late_console_init(void) { - if (at91_default_console_device && !(at91_console.flags & CON_ENABLED)) + if (atmel_default_console_device && !(at91_console.flags & CON_ENABLED)) register_console(&at91_console); return 0; @@ -866,7 +866,7 @@ static struct uart_driver at91_uart = { .dev_name = AT91_DEVICENAME, .major = SERIAL_AT91_MAJOR, .minor = MINOR_START, - .nr = AT91_NR_UART, + .nr = ATMEL_MAX_UART, .cons = AT91_CONSOLE_DEVICE, }; diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91rm9200/board.h index c1ca9a4658ec..d56527055c9d 100644 --- a/include/asm-arm/arch-at91rm9200/board.h +++ b/include/asm-arm/arch-at91rm9200/board.h @@ -97,10 +97,10 @@ struct at91_uart_config { unsigned short nr_tty; /* number of serial tty's */ short tty_map[]; /* map UART to tty number */ }; -extern struct platform_device *at91_default_console_device; +extern struct platform_device *atmel_default_console_device; extern void __init at91_init_serial(struct at91_uart_config *config); -struct at91_uart_data { +struct atmel_uart_data { short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ }; diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h index 6551b4d1ff7b..9ca4cc9c0b2e 100644 --- a/include/asm-arm/arch-at91rm9200/hardware.h +++ b/include/asm-arm/arch-at91rm9200/hardware.h @@ -44,7 +44,7 @@ #define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE) /* Serial ports */ -#define AT91_NR_UART 5 /* 4 USART3's and one DBGU port */ +#define ATMEL_MAX_UART 5 /* 4 USART3's and one DBGU port */ /* FLASH */ #define AT91_FLASH_BASE 0x10000000 /* NCS0: Flash physical base address */ diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h index 39368e18ab20..82e5404d2f48 100644 --- a/include/asm-avr32/arch-at32ap/board.h +++ b/include/asm-avr32/arch-at32ap/board.h @@ -9,8 +9,8 @@ /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */ void at32_add_system_devices(void); -#define AT91_NR_UART 4 -extern struct platform_device *at91_default_console_device; +#define ATMEL_MAX_UART 4 +extern struct platform_device *atmel_default_console_device; struct platform_device *at32_add_device_usart(unsigned int id); |