diff options
31 files changed, 1739 insertions, 476 deletions
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt new file mode 100644 index 000000000000..788fb0fa3762 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -0,0 +1,86 @@ +TI PHY: DT DOCUMENTATION FOR PHYs in TI PLATFORMs + +OMAP CONTROL PHY + +Required properties: + - compatible: Should be one of + "ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4. + "ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register + e.g. USB2_PHY on OMAP5. + "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control + e.g. USB3 PHY and SATA PHY on OMAP5. + "ti,control-phy-usb2-dra7" - if it has power down register like USB2 PHY on + DRA7 platform. + "ti,control-phy-usb2-am437" - if it has power down register like USB2 PHY on + AM437 platform. + - reg : Address and length of the register set for the device. It contains + the address of "otghs_control" for control-phy-otghs or "power" register + for other types. + - reg-names: should be "otghs_control" control-phy-otghs and "power" for + other types. + +omap_control_usb: omap-control-usb@4a002300 { + compatible = "ti,control-phy-otghs"; + reg = <0x4a00233c 0x4>; + reg-names = "otghs_control"; +}; + +OMAP USB2 PHY + +Required properties: + - compatible: Should be "ti,omap-usb2" + - reg : Address and length of the register set for the device. + - #phy-cells: determine the number of cells that should be given in the + phandle while referencing this phy. + +Optional properties: + - ctrl-module : phandle of the control module used by PHY driver to power on + the PHY. + +This is usually a subnode of ocp2scp to which it is connected. + +usb2phy@4a0ad080 { + compatible = "ti,omap-usb2"; + reg = <0x4a0ad080 0x58>; + ctrl-module = <&omap_control_usb>; + #phy-cells = <0>; +}; + +TI PIPE3 PHY + +Required properties: + - compatible: Should be "ti,phy-usb3" or "ti,phy-pipe3-sata". + "ti,omap-usb3" is deprecated. + - reg : Address and length of the register set for the device. + - reg-names: The names of the register addresses corresponding to the registers + filled in "reg". + - #phy-cells: determine the number of cells that should be given in the + phandle while referencing this phy. + - clocks: a list of phandles and clock-specifier pairs, one for each entry in + clock-names. + - clock-names: should include: + * "wkupclk" - wakeup clock. + * "sysclk" - system clock. + * "refclk" - reference clock. + +Optional properties: + - ctrl-module : phandle of the control module used by PHY driver to power on + the PHY. + +This is usually a subnode of ocp2scp to which it is connected. + +usb3phy@4a084400 { + compatible = "ti,phy-usb3"; + reg = <0x4a084400 0x80>, + <0x4a084800 0x64>, + <0x4a084c00 0x40>; + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_usb>; + #phy-cells = <0>; + clocks = <&usb_phy_cm_clk32k>, + <&sys_clkin>, + <&usb_otg_ss_refclk960m>; + clock-names = "wkupclk", + "sysclk", + "refclk"; +}; diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index e807635f9e1c..471366d6a129 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -6,11 +6,13 @@ Required properties: - compatible: must be "snps,dwc3" - reg : Address and length of the register set for the device - interrupts: Interrupts used by the dwc3 controller. + +Optional properties: - usb-phy : array of phandle for the PHY device. The first element in the array is expected to be a handle to the USB2/HS PHY and the second element is expected to be a handle to the USB3/SS PHY - -Optional properties: + - phys: from the *Generic PHY* bindings + - phy-names: from the *Generic PHY* bindings - tx-fifo-resize: determines if the FIFO *has* to be reallocated. This is usually a subnode to DWC3 glue to which it is connected. diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt index 5835b27146ea..cef181a9d8bd 100644 --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt @@ -1,13 +1,19 @@ * Freescale MXS USB Phy Device Required properties: -- compatible: Should be "fsl,imx23-usbphy" +- compatible: should contain: + * "fsl,imx23-usbphy" for imx23 and imx28 + * "fsl,imx6q-usbphy" for imx6dq and imx6dl + * "fsl,imx6sl-usbphy" for imx6sl + "fsl,imx23-usbphy" is still a fallback for other strings - reg: Should contain registers location and length - interrupts: Should contain phy interrupt +- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series Example: usbphy1: usbphy@020c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; + fsl,anatop = <&anatop>; }; diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index c495135115cb..38b2faec4199 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -76,27 +76,3 @@ omap_dwc3 { ranges; }; -OMAP CONTROL USB - -Required properties: - - compatible: Should be one of - "ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4. - "ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register - e.g. USB2_PHY on OMAP5. - "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control - e.g. USB3 PHY and SATA PHY on OMAP5. - "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on - DRA7 platform. - "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on - AM437 platform. - - reg : Address and length of the register set for the device. It contains - the address of "otghs_control" for control-phy-otghs or "power" register - for other types. - - reg-names: should be "otghs_control" control-phy-otghs and "power" for - other types. - -omap_control_usb: omap-control-usb@4a002300 { - compatible = "ti,control-phy-otghs"; - reg = <0x4a00233c 0x4>; - reg-names = "otghs_control"; -}; diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt deleted file mode 100644 index c0245c888982..000000000000 --- a/Documentation/devicetree/bindings/usb/usb-phy.txt +++ /dev/null @@ -1,48 +0,0 @@ -USB PHY - -OMAP USB2 PHY - -Required properties: - - compatible: Should be "ti,omap-usb2" - - reg : Address and length of the register set for the device. - - #phy-cells: determine the number of cells that should be given in the - phandle while referencing this phy. - -Optional properties: - - ctrl-module : phandle of the control module used by PHY driver to power on - the PHY. - -This is usually a subnode of ocp2scp to which it is connected. - -usb2phy@4a0ad080 { - compatible = "ti,omap-usb2"; - reg = <0x4a0ad080 0x58>; - ctrl-module = <&omap_control_usb>; - #phy-cells = <0>; -}; - -OMAP USB3 PHY - -Required properties: - - compatible: Should be "ti,omap-usb3" - - reg : Address and length of the register set for the device. - - reg-names: The names of the register addresses corresponding to the registers - filled in "reg". - - #phy-cells: determine the number of cells that should be given in the - phandle while referencing this phy. - -Optional properties: - - ctrl-module : phandle of the control module used by PHY driver to power on - the PHY. - -This is usually a subnode of ocp2scp to which it is connected. - -usb3phy@4a084400 { - compatible = "ti,omap-usb3"; - reg = <0x4a084400 0x80>, - <0x4a084800 0x64>, - <0x4a084c00 0x40>; - reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_usb>; - #phy-cells = <0>; -}; diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index a49217ae3533..d001417e8e37 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -61,9 +61,10 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode) * dwc3_core_soft_reset - Issues core soft reset and PHY reset * @dwc: pointer to our context structure */ -static void dwc3_core_soft_reset(struct dwc3 *dwc) +static int dwc3_core_soft_reset(struct dwc3 *dwc) { u32 reg; + int ret; /* Before Resetting PHY, put Core in Reset */ reg = dwc3_readl(dwc->regs, DWC3_GCTL); @@ -82,6 +83,15 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc) usb_phy_init(dwc->usb2_phy); usb_phy_init(dwc->usb3_phy); + ret = phy_init(dwc->usb2_generic_phy); + if (ret < 0) + return ret; + + ret = phy_init(dwc->usb3_generic_phy); + if (ret < 0) { + phy_exit(dwc->usb2_generic_phy); + return ret; + } mdelay(100); /* Clear USB3 PHY reset */ @@ -100,6 +110,8 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_CORESOFTRESET; dwc3_writel(dwc->regs, DWC3_GCTL, reg); + + return 0; } /** @@ -242,6 +254,90 @@ static void dwc3_event_buffers_cleanup(struct dwc3 *dwc) } } +static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc) +{ + if (!dwc->has_hibernation) + return 0; + + if (!dwc->nr_scratch) + return 0; + + dwc->scratchbuf = kmalloc_array(dwc->nr_scratch, + DWC3_SCRATCHBUF_SIZE, GFP_KERNEL); + if (!dwc->scratchbuf) + return -ENOMEM; + + return 0; +} + +static int dwc3_setup_scratch_buffers(struct dwc3 *dwc) +{ + dma_addr_t scratch_addr; + u32 param; + int ret; + + if (!dwc->has_hibernation) + return 0; + + if (!dwc->nr_scratch) + return 0; + + /* should never fall here */ + if (!WARN_ON(dwc->scratchbuf)) + return 0; + + scratch_addr = dma_map_single(dwc->dev, dwc->scratchbuf, + dwc->nr_scratch * DWC3_SCRATCHBUF_SIZE, + DMA_BIDIRECTIONAL); + if (dma_mapping_error(dwc->dev, scratch_addr)) { + dev_err(dwc->dev, "failed to map scratch buffer\n"); + ret = -EFAULT; + goto err0; + } + + dwc->scratch_addr = scratch_addr; + + param = lower_32_bits(scratch_addr); + + ret = dwc3_send_gadget_generic_command(dwc, + DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO, param); + if (ret < 0) + goto err1; + + param = upper_32_bits(scratch_addr); + + ret = dwc3_send_gadget_generic_command(dwc, + DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI, param); + if (ret < 0) + goto err1; + + return 0; + +err1: + dma_unmap_single(dwc->dev, dwc->scratch_addr, dwc->nr_scratch * + DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); + +err0: + return ret; +} + +static void dwc3_free_scratch_buffers(struct dwc3 *dwc) +{ + if (!dwc->has_hibernation) + return; + + if (!dwc->nr_scratch) + return; + + /* should never fall here */ + if (!WARN_ON(dwc->scratchbuf)) + return; + + dma_unmap_single(dwc->dev, dwc->scratch_addr, dwc->nr_scratch * + DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); + kfree(dwc->scratchbuf); +} + static void dwc3_core_num_eps(struct dwc3 *dwc) { struct dwc3_hwparams *parms = &dwc->hwparams; @@ -277,6 +373,7 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc) static int dwc3_core_init(struct dwc3 *dwc) { unsigned long timeout; + u32 hwparams4 = dwc->hwparams.hwparams4; u32 reg; int ret; @@ -306,7 +403,9 @@ static int dwc3_core_init(struct dwc3 *dwc) cpu_relax(); } while (true); - dwc3_core_soft_reset(dwc); + ret = dwc3_core_soft_reset(dwc); + if (ret) + goto err0; reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_SCALEDOWN_MASK; @@ -314,7 +413,29 @@ static int dwc3_core_init(struct dwc3 *dwc) switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) { case DWC3_GHWPARAMS1_EN_PWROPT_CLK: - reg &= ~DWC3_GCTL_DSBLCLKGTNG; + /** + * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an + * issue which would cause xHCI compliance tests to fail. + * + * Because of that we cannot enable clock gating on such + * configurations. + * + * Refers to: + * + * STAR#9000588375: Clock Gating, SOF Issues when ref_clk-Based + * SOF/ITP Mode Used + */ + if ((dwc->dr_mode == USB_DR_MODE_HOST || + dwc->dr_mode == USB_DR_MODE_OTG) && + (dwc->revision >= DWC3_REVISION_210A && + dwc->revision <= DWC3_REVISION_250A)) + reg |= DWC3_GCTL_DSBLCLKGTNG | DWC3_GCTL_SOFITPSYNC; + else + reg &= ~DWC3_GCTL_DSBLCLKGTNG; + break; + case DWC3_GHWPARAMS1_EN_PWROPT_HIB: + /* enable hibernation here */ + dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4); break; default: dev_dbg(dwc->dev, "No power optimization available\n"); @@ -333,16 +454,36 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GCTL, reg); + ret = dwc3_alloc_scratch_buffers(dwc); + if (ret) + goto err1; + + ret = dwc3_setup_scratch_buffers(dwc); + if (ret) + goto err2; + return 0; +err2: + dwc3_free_scratch_buffers(dwc); + +err1: + usb_phy_shutdown(dwc->usb2_phy); + usb_phy_shutdown(dwc->usb3_phy); + phy_exit(dwc->usb2_generic_phy); + phy_exit(dwc->usb3_generic_phy); + err0: return ret; } static void dwc3_core_exit(struct dwc3 *dwc) { + dwc3_free_scratch_buffers(dwc); usb_phy_shutdown(dwc->usb2_phy); usb_phy_shutdown(dwc->usb3_phy); + phy_exit(dwc->usb2_generic_phy); + phy_exit(dwc->usb3_generic_phy); } #define DWC3_ALIGN_MASK (16 - 1) @@ -411,32 +552,52 @@ static int dwc3_probe(struct platform_device *pdev) if (IS_ERR(dwc->usb2_phy)) { ret = PTR_ERR(dwc->usb2_phy); - - /* - * if -ENXIO is returned, it means PHY layer wasn't - * enabled, so it makes no sense to return -EPROBE_DEFER - * in that case, since no PHY driver will ever probe. - */ - if (ret == -ENXIO) + if (ret == -ENXIO || ret == -ENODEV) { + dwc->usb2_phy = NULL; + } else if (ret == -EPROBE_DEFER) { return ret; - - dev_err(dev, "no usb2 phy configured\n"); - return -EPROBE_DEFER; + } else { + dev_err(dev, "no usb2 phy configured\n"); + return ret; + } } if (IS_ERR(dwc->usb3_phy)) { ret = PTR_ERR(dwc->usb3_phy); + if (ret == -ENXIO || ret == -ENODEV) { + dwc->usb3_phy = NULL; + } else if (ret == -EPROBE_DEFER) { + return ret; + } else { + dev_err(dev, "no usb3 phy configured\n"); + return ret; + } + } - /* - * if -ENXIO is returned, it means PHY layer wasn't - * enabled, so it makes no sense to return -EPROBE_DEFER - * in that case, since no PHY driver will ever probe. - */ - if (ret == -ENXIO) + dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy"); + if (IS_ERR(dwc->usb2_generic_phy)) { + ret = PTR_ERR(dwc->usb2_generic_phy); + if (ret == -ENOSYS || ret == -ENODEV) { + dwc->usb2_generic_phy = NULL; + } else if (ret == -EPROBE_DEFER) { + return ret; + } else { + dev_err(dev, "no usb2 phy configured\n"); return ret; + } + } - dev_err(dev, "no usb3 phy configured\n"); - return -EPROBE_DEFER; + dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy"); + if (IS_ERR(dwc->usb3_generic_phy)) { + ret = PTR_ERR(dwc->usb3_generic_phy); + if (ret == -ENOSYS || ret == -ENODEV) { + dwc->usb3_generic_phy = NULL; + } else if (ret == -EPROBE_DEFER) { + return ret; + } else { + dev_err(dev, "no usb3 phy configured\n"); + return ret; + } } dwc->xhci_resources[0].start = res->start; @@ -479,6 +640,14 @@ static int dwc3_probe(struct platform_device *pdev) goto err0; } + if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) + dwc->dr_mode = USB_DR_MODE_HOST; + else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) + dwc->dr_mode = USB_DR_MODE_PERIPHERAL; + + if (dwc->dr_mode == USB_DR_MODE_UNKNOWN) + dwc->dr_mode = USB_DR_MODE_OTG; + ret = dwc3_core_init(dwc); if (ret) { dev_err(dev, "failed to initialize core\n"); @@ -487,21 +656,20 @@ static int dwc3_probe(struct platform_device *pdev) usb_phy_set_suspend(dwc->usb2_phy, 0); usb_phy_set_suspend(dwc->usb3_phy, 0); + ret = phy_power_on(dwc->usb2_generic_phy); + if (ret < 0) + goto err1; + + ret = phy_power_on(dwc->usb3_generic_phy); + if (ret < 0) + goto err_usb2phy_power; ret = dwc3_event_buffers_setup(dwc); if (ret) { dev_err(dwc->dev, "failed to setup event buffers\n"); - goto err1; + goto err_usb3phy_power; } - if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) - dwc->dr_mode = USB_DR_MODE_HOST; - else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) - dwc->dr_mode = USB_DR_MODE_PERIPHERAL; - - if (dwc->dr_mode == USB_DR_MODE_UNKNOWN) - dwc->dr_mode = USB_DR_MODE_OTG; - switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); @@ -568,6 +736,12 @@ err3: err2: dwc3_event_buffers_cleanup(dwc); +err_usb3phy_power: + phy_power_off(dwc->usb3_generic_phy); + +err_usb2phy_power: + phy_power_off(dwc->usb2_generic_phy); + err1: usb_phy_set_suspend(dwc->usb2_phy, 1); usb_phy_set_suspend(dwc->usb3_phy, 1); @@ -585,6 +759,8 @@ static int dwc3_remove(struct platform_device *pdev) usb_phy_set_suspend(dwc->usb2_phy, 1); usb_phy_set_suspend(dwc->usb3_phy, 1); + phy_power_off(dwc->usb2_generic_phy); + phy_power_off(dwc->usb3_generic_phy); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); @@ -682,6 +858,8 @@ static int dwc3_suspend(struct device *dev) usb_phy_shutdown(dwc->usb3_phy); usb_phy_shutdown(dwc->usb2_phy); + phy_exit(dwc->usb2_generic_phy); + phy_exit(dwc->usb3_generic_phy); return 0; } @@ -690,9 +868,17 @@ static int dwc3_resume(struct device *dev) { struct dwc3 *dwc = dev_get_drvdata(dev); unsigned long flags; + int ret; usb_phy_init(dwc->usb3_phy); usb_phy_init(dwc->usb2_phy); + ret = phy_init(dwc->usb2_generic_phy); + if (ret < 0) + return ret; + + ret = phy_init(dwc->usb3_generic_phy); + if (ret < 0) + goto err_usb2phy_init; spin_lock_irqsave(&dwc->lock, flags); @@ -716,6 +902,11 @@ static int dwc3_resume(struct device *dev) pm_runtime_enable(dev); return 0; + +err_usb2phy_init: + phy_exit(dwc->usb2_generic_phy); + + return ret; } static const struct dev_pm_ops dwc3_dev_pm_ops = { diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index f8af8d44af85..57332e3768e4 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -31,11 +31,14 @@ #include <linux/usb/gadget.h> #include <linux/usb/otg.h> +#include <linux/phy/phy.h> + /* Global constants */ #define DWC3_EP0_BOUNCE_SIZE 512 #define DWC3_ENDPOINTS_NUM 32 #define DWC3_XHCI_RESOURCES_NUM 2 +#define DWC3_SCRATCHBUF_SIZE 4096 /* each buffer is assumed to be 4KiB */ #define DWC3_EVENT_SIZE 4 /* bytes */ #define DWC3_EVENT_MAX_NUM 64 /* 2 events/endpoint */ #define DWC3_EVENT_BUFFERS_SIZE (DWC3_EVENT_SIZE * DWC3_EVENT_MAX_NUM) @@ -157,6 +160,7 @@ #define DWC3_GCTL_PRTCAP_OTG 3 #define DWC3_GCTL_CORESOFTRESET (1 << 11) +#define DWC3_GCTL_SOFITPSYNC (1 << 10) #define DWC3_GCTL_SCALEDOWN(n) ((n) << 4) #define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3) #define DWC3_GCTL_DISSCRAMBLE (1 << 3) @@ -318,7 +322,7 @@ /* Device Endpoint Command Register */ #define DWC3_DEPCMD_PARAM_SHIFT 16 #define DWC3_DEPCMD_PARAM(x) ((x) << DWC3_DEPCMD_PARAM_SHIFT) -#define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f) +#define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f) #define DWC3_DEPCMD_STATUS(x) (((x) >> 15) & 1) #define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11) #define DWC3_DEPCMD_CMDACT (1 << 10) @@ -393,6 +397,7 @@ struct dwc3_event_buffer { * @busy_slot: first slot which is owned by HW * @desc: usb_endpoint_descriptor pointer * @dwc: pointer to DWC controller + * @saved_state: ep state saved during hibernation * @flags: endpoint flags (wedged, stalled, ...) * @current_trb: index of current used trb * @number: endpoint number (1 - 15) @@ -415,6 +420,7 @@ struct dwc3_ep { const struct usb_ss_ep_comp_descriptor *comp_desc; struct dwc3 *dwc; + u32 saved_state; unsigned flags; #define DWC3_EP_ENABLED (1 << 0) #define DWC3_EP_STALL (1 << 1) @@ -598,6 +604,7 @@ struct dwc3_scratchpad_array { * @ep0_trb: dma address of ep0_trb * @ep0_usb_req: dummy req used while handling STD USB requests * @ep0_bounce_addr: dma address of ep0_bounce + * @scratch_addr: dma address of scratchbuf * @lock: for synchronizing * @dev: pointer to our struct device * @xhci: pointer to our xHCI child @@ -606,6 +613,7 @@ struct dwc3_scratchpad_array { * @gadget_driver: pointer to the gadget driver * @regs: base address for our registers * @regs_size: address space size + * @nr_scratch: number of scratch buffers * @num_event_buffers: calculated number of event buffers * @u1u2: only used on revisions <1.83a for workaround * @maximum_speed: maximum speed requested (mainly for testing purposes) @@ -613,16 +621,10 @@ struct dwc3_scratchpad_array { * @dr_mode: requested mode of operation * @usb2_phy: pointer to USB2 PHY * @usb3_phy: pointer to USB3 PHY + * @usb2_generic_phy: pointer to USB2 PHY + * @usb3_generic_phy: pointer to USB3 PHY * @dcfg: saved contents of DCFG register * @gctl: saved contents of GCTL register - * @is_selfpowered: true when we are selfpowered - * @three_stage_setup: set if we perform a three phase setup - * @ep0_bounced: true when we used bounce buffer - * @ep0_expect_in: true when we expect a DATA IN transfer - * @start_config_issued: true when StartConfig command has been issued - * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround - * @needs_fifo_resize: not all users might want fifo resizing, flag it - * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes. * @isoch_delay: wValue from Set Isochronous Delay request; * @u2sel: parameter from Set SEL request. * @u2pel: parameter from Set SEL request. @@ -637,15 +639,31 @@ struct dwc3_scratchpad_array { * @mem: points to start of memory which is used for this struct. * @hwparams: copy of hwparams registers * @root: debugfs root folder pointer + * @regset: debugfs pointer to regdump file + * @test_mode: true when we're entering a USB test mode + * @test_mode_nr: test feature selector + * @delayed_status: true when gadget driver asks for delayed status + * @ep0_bounced: true when we used bounce buffer + * @ep0_expect_in: true when we expect a DATA IN transfer + * @has_hibernation: true when dwc3 was configured with Hibernation + * @is_selfpowered: true when we are selfpowered + * @needs_fifo_resize: not all users might want fifo resizing, flag it + * @pullups_connected: true when Run/Stop bit is set + * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes. + * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround + * @start_config_issued: true when StartConfig command has been issued + * @three_stage_setup: set if we perform a three phase setup */ struct dwc3 { struct usb_ctrlrequest *ctrl_req; struct dwc3_trb *ep0_trb; void *ep0_bounce; + void *scratchbuf; u8 *setup_buf; dma_addr_t ctrl_req_addr; dma_addr_t ep0_trb_addr; dma_addr_t ep0_bounce_addr; + dma_addr_t scratch_addr; struct dwc3_request ep0_usb_req; /* device lock */ @@ -665,6 +683,9 @@ struct dwc3 { struct usb_phy *usb2_phy; struct usb_phy *usb3_phy; + struct phy *usb2_generic_phy; + struct phy *usb3_generic_phy; + void __iomem *regs; size_t regs_size; @@ -674,6 +695,7 @@ struct dwc3 { u32 dcfg; u32 gctl; + u32 nr_scratch; u32 num_event_buffers; u32 u1u2; u32 maximum_speed; @@ -695,17 +717,9 @@ struct dwc3 { #define DWC3_REVISION_230A 0x5533230a #define DWC3_REVISION_240A 0x5533240a #define DWC3_REVISION_250A 0x5533250a - - unsigned is_selfpowered:1; - unsigned three_stage_setup:1; - unsigned ep0_bounced:1; - unsigned ep0_expect_in:1; - unsigned start_config_issued:1; - unsigned setup_packet_pending:1; - unsigned delayed_status:1; - unsigned needs_fifo_resize:1; - unsigned resize_fifos:1; - unsigned pullups_connected:1; +#define DWC3_REVISION_260A 0x5533260a +#define DWC3_REVISION_270A 0x5533270a +#define DWC3_REVISION_280A 0x5533280a enum dwc3_ep0_next ep0_next_event; enum dwc3_ep0_state ep0state; @@ -730,6 +744,18 @@ struct dwc3 { u8 test_mode; u8 test_mode_nr; + + unsigned delayed_status:1; + unsigned ep0_bounced:1; + unsigned ep0_expect_in:1; + unsigned has_hibernation:1; + unsigned is_selfpowered:1; + unsigned needs_fifo_resize:1; + unsigned pullups_connected:1; + unsigned resize_fifos:1; + unsigned setup_packet_pending:1; + unsigned start_config_issued:1; + unsigned three_stage_setup:1; }; /* -------------------------------------------------------------------------- */ @@ -815,15 +841,15 @@ struct dwc3_event_depevt { * 12 - VndrDevTstRcved * @reserved15_12: Reserved, not used * @event_info: Information about this event - * @reserved31_24: Reserved, not used + * @reserved31_25: Reserved, not used */ struct dwc3_event_devt { u32 one_bit:1; u32 device_event:7; u32 type:4; u32 reserved15_12:4; - u32 event_info:8; - u32 reserved31_24:8; + u32 event_info:9; + u32 reserved31_25:7; } __packed; /** @@ -856,6 +882,19 @@ union dwc3_event { struct dwc3_event_gevt gevt; }; +/** + * struct dwc3_gadget_ep_cmd_params - representation of endpoint command + * parameters + * @param2: third parameter + * @param1: second parameter + * @param0: first parameter + */ +struct dwc3_gadget_ep_cmd_params { + u32 param2; + u32 param1; + u32 param0; +}; + /* * DWC3 Features to be used as Driver Data */ @@ -881,11 +920,31 @@ static inline void dwc3_host_exit(struct dwc3 *dwc) #if IS_ENABLED(CONFIG_USB_DWC3_GADGET) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) int dwc3_gadget_init(struct dwc3 *dwc); void dwc3_gadget_exit(struct dwc3 *dwc); +int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode); +int dwc3_gadget_get_link_state(struct dwc3 *dwc); +int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state); +int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, + unsigned cmd, struct dwc3_gadget_ep_cmd_params *params); +int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param); #else static inline int dwc3_gadget_init(struct dwc3 *dwc) { return 0; } static inline void dwc3_gadget_exit(struct dwc3 *dwc) { } +static inline int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode) +{ return 0; } +static inline int dwc3_gadget_get_link_state(struct dwc3 *dwc) +{ return 0; } +static inline int dwc3_gadget_set_link_state(struct dwc3 *dwc, + enum dwc3_link_state state) +{ return 0; } + +static inline int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, + unsigned cmd, struct dwc3_gadget_ep_cmd_params *params) +{ return 0; } +static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc, + int cmd, u32 param) +{ return 0; } #endif /* power management interface */ diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index b269dbd47fc4..80b3357034b7 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -424,11 +424,6 @@ static int dwc3_omap_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "missing memory base resource\n"); - return -EINVAL; - } - base = devm_ioremap_resource(dev, res); if (IS_ERR(base)) return PTR_ERR(base); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 2da0a5a2803a..a740eac74d56 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -68,6 +68,22 @@ int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode) } /** + * dwc3_gadget_get_link_state - Gets current state of USB Link + * @dwc: pointer to our context structure + * + * Caller should take care of locking. This function will + * return the link state on success (>= 0) or -ETIMEDOUT. + */ +int dwc3_gadget_get_link_state(struct dwc3 *dwc) +{ + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + + return DWC3_DSTS_USBLNKST(reg); +} + +/** * dwc3_gadget_set_link_state - Sets USB Link to a particular State * @dwc: pointer to our context structure * @state: the state to put link into @@ -417,7 +433,7 @@ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, const struct usb_endpoint_descriptor *desc, const struct usb_ss_ep_comp_descriptor *comp_desc, - bool ignore) + bool ignore, bool restore) { struct dwc3_gadget_ep_cmd_params params; @@ -436,6 +452,11 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, if (ignore) params.param0 |= DWC3_DEPCFG_IGN_SEQ_NUM; + if (restore) { + params.param0 |= DWC3_DEPCFG_ACTION_RESTORE; + params.param2 |= dep->saved_state; + } + params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN | DWC3_DEPCFG_XFER_NOT_READY_EN; @@ -494,7 +515,7 @@ static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep) static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, const struct usb_endpoint_descriptor *desc, const struct usb_ss_ep_comp_descriptor *comp_desc, - bool ignore) + bool ignore, bool restore) { struct dwc3 *dwc = dep->dwc; u32 reg; @@ -508,7 +529,8 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, return ret; } - ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, ignore); + ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, ignore, + restore); if (ret) return ret; @@ -548,13 +570,13 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, return 0; } -static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum); +static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force); static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep) { struct dwc3_request *req; if (!list_empty(&dep->req_queued)) { - dwc3_stop_active_transfer(dwc, dep->number); + dwc3_stop_active_transfer(dwc, dep->number, true); /* - giveback all requests to gadget driver */ while (!list_empty(&dep->req_queued)) { @@ -659,7 +681,7 @@ static int dwc3_gadget_ep_enable(struct usb_ep *ep, } spin_lock_irqsave(&dwc->lock, flags); - ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false); + ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false, false); spin_unlock_irqrestore(&dwc->lock, flags); return ret; @@ -771,9 +793,6 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST; else trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS; - - if (!req->request.no_interrupt && !chain) - trb->ctrl |= DWC3_TRB_CTRL_IOC; break; case USB_ENDPOINT_XFER_BULK: @@ -788,6 +807,9 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, BUG(); } + if (!req->request.no_interrupt && !chain) + trb->ctrl |= DWC3_TRB_CTRL_IOC; + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI; trb->ctrl |= DWC3_TRB_CTRL_CSP; @@ -1077,7 +1099,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) */ if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { if (list_empty(&dep->req_queued)) { - dwc3_stop_active_transfer(dwc, dep->number); + dwc3_stop_active_transfer(dwc, dep->number, true); dep->flags = DWC3_EP_ENABLED; } return 0; @@ -1107,6 +1129,23 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) return ret; } + /* + * 4. Stream Capable Bulk Endpoints. We need to start the transfer + * right away, otherwise host will not know we have streams to be + * handled. + */ + if (dep->stream_capable) { + int ret; + + ret = __dwc3_gadget_kick_transfer(dep, 0, true); + if (ret && ret != -EBUSY) { + struct dwc3 *dwc = dep->dwc; + + dev_dbg(dwc->dev, "%s: failed to kick transfers\n", + dep->name); + } + } + return 0; } @@ -1163,7 +1202,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, } if (r == req) { /* wait until it is processed */ - dwc3_stop_active_transfer(dwc, dep->number); + dwc3_stop_active_transfer(dwc, dep->number, true); goto out1; } dev_err(dwc->dev, "request %p was not queued to %s\n", @@ -1194,8 +1233,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value) ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, DWC3_DEPCMD_SETSTALL, ¶ms); if (ret) - dev_err(dwc->dev, "failed to %s STALL on %s\n", - value ? "set" : "clear", + dev_err(dwc->dev, "failed to set STALL on %s\n", dep->name); else dep->flags |= DWC3_EP_STALL; @@ -1203,8 +1241,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value) ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, DWC3_DEPCMD_CLEARSTALL, ¶ms); if (ret) - dev_err(dwc->dev, "failed to %s STALL on %s\n", - value ? "set" : "clear", + dev_err(dwc->dev, "failed to clear STALL on %s\n", dep->name); else dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE); @@ -1387,7 +1424,7 @@ static int dwc3_gadget_set_selfpowered(struct usb_gadget *g, return 0; } -static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on) +static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend) { u32 reg; u32 timeout = 500; @@ -1402,9 +1439,17 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on) if (dwc->revision >= DWC3_REVISION_194A) reg &= ~DWC3_DCTL_KEEP_CONNECT; reg |= DWC3_DCTL_RUN_STOP; + + if (dwc->has_hibernation) + reg |= DWC3_DCTL_KEEP_CONNECT; + dwc->pullups_connected = true; } else { reg &= ~DWC3_DCTL_RUN_STOP; + + if (dwc->has_hibernation && !suspend) + reg &= ~DWC3_DCTL_KEEP_CONNECT; + dwc->pullups_connected = false; } @@ -1442,7 +1487,7 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) is_on = !!is_on; spin_lock_irqsave(&dwc->lock, flags); - ret = dwc3_gadget_run_stop(dwc, is_on); + ret = dwc3_gadget_run_stop(dwc, is_on, false); spin_unlock_irqrestore(&dwc->lock, flags); return ret; @@ -1549,14 +1594,16 @@ static int dwc3_gadget_start(struct usb_gadget *g, dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); dep = dwc->eps[0]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false, + false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); goto err2; } dep = dwc->eps[1]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false, + false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); goto err3; @@ -1849,15 +1896,12 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, */ dep->flags = DWC3_EP_PENDING_REQUEST; } else { - dwc3_stop_active_transfer(dwc, dep->number); + dwc3_stop_active_transfer(dwc, dep->number, true); dep->flags = DWC3_EP_ENABLED; } return 1; } - if ((event->status & DEPEVT_STATUS_IOC) && - (trb->ctrl & DWC3_TRB_CTRL_IOC)) - return 0; return 1; } @@ -1999,7 +2043,25 @@ static void dwc3_disconnect_gadget(struct dwc3 *dwc) } } -static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum) +static void dwc3_suspend_gadget(struct dwc3 *dwc) +{ + if (dwc->gadget_driver && dwc->gadget_driver->suspend) { + spin_unlock(&dwc->lock); + dwc->gadget_driver->suspend(&dwc->gadget); + spin_lock(&dwc->lock); + } +} + +static void dwc3_resume_gadget(struct dwc3 *dwc) +{ + if (dwc->gadget_driver && dwc->gadget_driver->resume) { + spin_unlock(&dwc->lock); + dwc->gadget_driver->resume(&dwc->gadget); + spin_lock(&dwc->lock); + } +} + +static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force) { struct dwc3_ep *dep; struct dwc3_gadget_ep_cmd_params params; @@ -2031,7 +2093,8 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum) */ cmd = DWC3_DEPCMD_ENDTRANSFER; - cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC; + cmd |= force ? DWC3_DEPCMD_HIPRI_FORCERM : 0; + cmd |= DWC3_DEPCMD_CMDIOC; cmd |= DWC3_DEPCMD_PARAM(dep->resource_index); memset(¶ms, 0, sizeof(params)); ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); @@ -2260,17 +2323,23 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) reg |= DWC3_DCTL_HIRD_THRES(12); dwc3_writel(dwc->regs, DWC3_DCTL, reg); + } else { + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~DWC3_DCTL_HIRD_THRES_MASK; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); } dep = dwc->eps[0]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true, + false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); return; } dep = dwc->eps[1]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true, + false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); return; @@ -2378,9 +2447,50 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc, dwc->link_state = next; + switch (next) { + case DWC3_LINK_STATE_U1: + if (dwc->speed == USB_SPEED_SUPER) + dwc3_suspend_gadget(dwc); + break; + case DWC3_LINK_STATE_U2: + case DWC3_LINK_STATE_U3: + dwc3_suspend_gadget(dwc); + break; + case DWC3_LINK_STATE_RESUME: + dwc3_resume_gadget(dwc); + break; + default: + /* do nothing */ + break; + } + dev_vdbg(dwc->dev, "%s link %d\n", __func__, dwc->link_state); } +static void dwc3_gadget_hibernation_interrupt(struct dwc3 *dwc, + unsigned int evtinfo) +{ + unsigned int is_ss = evtinfo & BIT(4); + + /** + * WORKAROUND: DWC3 revison 2.20a with hibernation support + * have a known issue which can cause USB CV TD.9.23 to fail + * randomly. + * + * Because of this issue, core could generate bogus hibernation + * events which SW needs to ignore. + * + * Refers to: + * + * STAR#9000546576: Device Mode Hibernation: Issue in USB 2.0 + * Device Fallback from SuperSpeed + */ + if (is_ss ^ (dwc->speed == USB_SPEED_SUPER)) + return; + + /* enter hibernation here */ +} + static void dwc3_gadget_interrupt(struct dwc3 *dwc, const struct dwc3_event_devt *event) { @@ -2397,6 +2507,13 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc, case DWC3_DEVICE_EVENT_WAKEUP: dwc3_gadget_wakeup_interrupt(dwc); break; + case DWC3_DEVICE_EVENT_HIBER_REQ: + if (dev_WARN_ONCE(dwc->dev, !dwc->has_hibernation, + "unexpected hibernation event\n")) + break; + + dwc3_gadget_hibernation_interrupt(dwc, event->event_info); + break; case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE: dwc3_gadget_linksts_change_interrupt(dwc, event->event_info); break; @@ -2661,8 +2778,10 @@ void dwc3_gadget_exit(struct dwc3 *dwc) int dwc3_gadget_prepare(struct dwc3 *dwc) { - if (dwc->pullups_connected) + if (dwc->pullups_connected) { dwc3_gadget_disable_irq(dwc); + dwc3_gadget_run_stop(dwc, true, true); + } return 0; } @@ -2671,7 +2790,7 @@ void dwc3_gadget_complete(struct dwc3 *dwc) { if (dwc->pullups_connected) { dwc3_gadget_enable_irq(dwc); - dwc3_gadget_run_stop(dwc, true); + dwc3_gadget_run_stop(dwc, true, false); } } @@ -2694,12 +2813,14 @@ int dwc3_gadget_resume(struct dwc3 *dwc) dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); dep = dwc->eps[0]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false, + false); if (ret) goto err0; dep = dwc->eps[1]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false, + false); if (ret) goto err1; diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index febe1aa7b714..a0ee75b68a80 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -56,12 +56,6 @@ struct dwc3; /* DEPXFERCFG parameter 0 */ #define DWC3_DEPXFERCFG_NUM_XFER_RES(n) ((n) & 0xffff) -struct dwc3_gadget_ep_cmd_params { - u32 param2; - u32 param1; - u32 param0; -}; - /* -------------------------------------------------------------------------- */ #define to_dwc3_request(r) (container_of(r, struct dwc3_request, request)) @@ -85,9 +79,6 @@ static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req) void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, int status); -int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode); -int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state); - void dwc3_ep0_interrupt(struct dwc3 *dwc, const struct dwc3_event_depevt *event); void dwc3_ep0_out_start(struct dwc3 *dwc); @@ -95,9 +86,6 @@ int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value); int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, gfp_t gfp_flags); int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value); -int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, - unsigned cmd, struct dwc3_gadget_ep_cmd_params *params); -int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param); /** * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 42f017afd366..3557c7e5040d 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -301,7 +301,6 @@ config USB_PXA27X gadget drivers to also be dynamically linked. config USB_S3C_HSOTG - depends on ARM tristate "Designware/S3C HS/OtG USB Device controller" help The Designware USB2.0 high-speed gadget controller diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index cea8c20a1425..f605ad8c1902 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1758,15 +1758,15 @@ static int at91udc_probe(struct platform_device *pdev) /* newer chips have more FIFO memory than rm9200 */ if (cpu_is_at91sam9260() || cpu_is_at91sam9g20()) { - usb_ep_set_maxpacket_limit(&udc->ep[0].ep, 64); - usb_ep_set_maxpacket_limit(&udc->ep[3].ep, 64); - usb_ep_set_maxpacket_limit(&udc->ep[4].ep, 512); - usb_ep_set_maxpacket_limit(&udc->ep[5].ep, 512); + udc->ep[0].maxpacket = 64; + udc->ep[3].maxpacket = 64; + udc->ep[4].maxpacket = 512; + udc->ep[5].maxpacket = 512; } else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) { - usb_ep_set_maxpacket_limit(&udc->ep[3].ep, 64); + udc->ep[3].maxpacket = 64; } else if (cpu_is_at91sam9263()) { - usb_ep_set_maxpacket_limit(&udc->ep[0].ep, 64); - usb_ep_set_maxpacket_limit(&udc->ep[3].ep, 64); + udc->ep[0].maxpacket = 64; + udc->ep[3].maxpacket = 64; } udc->udp_baseaddr = ioremap(res->start, resource_size(res)); diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 52771d4c44bc..9f65324f9ae0 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -1661,7 +1661,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) if (dma_status) { int i; - for (i = 1; i < USBA_NR_ENDPOINTS; i++) + for (i = 1; i < USBA_NR_DMAS; i++) if (dma_status & (1 << i)) usba_dma_irq(udc, &udc->usba_ep[i]); } @@ -1670,7 +1670,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) if (ep_status) { int i; - for (i = 0; i < USBA_NR_ENDPOINTS; i++) + for (i = 0; i < udc->num_ep; i++) if (ep_status & (1 << i)) { if (ep_is_control(&udc->usba_ep[i])) usba_control_irq(udc, &udc->usba_ep[i]); @@ -1827,12 +1827,12 @@ static int atmel_usba_stop(struct usb_gadget *gadget, toggle_bias(0); usba_writel(udc, CTRL, USBA_DISABLE_MASK); - udc->driver = NULL; - clk_disable_unprepare(udc->hclk); clk_disable_unprepare(udc->pclk); - DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name); + DBG(DBG_GADGET, "unregistered driver `%s'\n", udc->driver->driver.name); + + udc->driver = NULL; return 0; } @@ -1914,6 +1914,12 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, i++; } + if (i == 0) { + dev_err(&pdev->dev, "of_probe: no endpoint specified\n"); + ret = -EINVAL; + goto err; + } + return eps; err: return ERR_PTR(ret); diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h index 2922db50befe..a70706e8cb02 100644 --- a/drivers/usb/gadget/atmel_usba_udc.h +++ b/drivers/usb/gadget/atmel_usba_udc.h @@ -210,7 +210,7 @@ #define USBA_FIFO_BASE(x) ((x) << 16) /* Synth parameters */ -#define USBA_NR_ENDPOINTS 7 +#define USBA_NR_DMAS 7 #define EP0_FIFO_SIZE 64 #define EP0_EPT_SIZE USBA_EPT_SIZE_64 diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 2b4334394076..10c086afa2f4 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -28,6 +28,10 @@ #include <linux/usb/composite.h> #include <linux/usb/functionfs.h> +#include <linux/aio.h> +#include <linux/mmu_context.h> +#include <linux/poll.h> + #include "u_fs.h" #include "configfs.h" @@ -99,6 +103,14 @@ static struct ffs_function *ffs_func_from_usb(struct usb_function *f) } +static inline enum ffs_setup_state +ffs_setup_state_clear_cancelled(struct ffs_data *ffs) +{ + return (enum ffs_setup_state) + cmpxchg(&ffs->setup_state, FFS_SETUP_CANCELLED, FFS_NO_SETUP); +} + + static void ffs_func_eps_disable(struct ffs_function *func); static int __must_check ffs_func_eps_enable(struct ffs_function *func); @@ -122,8 +134,8 @@ struct ffs_ep { struct usb_ep *ep; /* P: ffs->eps_lock */ struct usb_request *req; /* P: epfile->mutex */ - /* [0]: full speed, [1]: high speed */ - struct usb_endpoint_descriptor *descs[2]; + /* [0]: full speed, [1]: high speed, [2]: super speed */ + struct usb_endpoint_descriptor *descs[3]; u8 num; @@ -148,6 +160,25 @@ struct ffs_epfile { unsigned char _pad; }; +/* ffs_io_data structure ***************************************************/ + +struct ffs_io_data { + bool aio; + bool read; + + struct kiocb *kiocb; + const struct iovec *iovec; + unsigned long nr_segs; + char __user *buf; + size_t len; + + struct mm_struct *mm; + struct work_struct work; + + struct usb_ep *ep; + struct usb_request *req; +}; + static int __must_check ffs_epfiles_create(struct ffs_data *ffs); static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count); @@ -161,8 +192,10 @@ ffs_sb_create_file(struct super_block *sb, const char *name, void *data, DEFINE_MUTEX(ffs_lock); EXPORT_SYMBOL(ffs_lock); -static struct ffs_dev *ffs_find_dev(const char *name); +static struct ffs_dev *_ffs_find_dev(const char *name); +static struct ffs_dev *_ffs_alloc_dev(void); static int _ffs_name_dev(struct ffs_dev *dev, const char *name); +static void _ffs_free_dev(struct ffs_dev *dev); static void *ffs_acquire_dev(const char *dev_name); static void ffs_release_dev(struct ffs_data *ffs_data); static int ffs_ready(struct ffs_data *ffs); @@ -218,7 +251,7 @@ static int __ffs_ep0_queue_wait(struct ffs_data *ffs, char *data, size_t len) } ffs->setup_state = FFS_NO_SETUP; - return ffs->ep0req_status; + return req->status ? req->status : req->actual; } static int __ffs_ep0_stall(struct ffs_data *ffs) @@ -244,7 +277,7 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf, ENTER(); /* Fast check if setup was canceled */ - if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) + if (ffs_setup_state_clear_cancelled(ffs) == FFS_SETUP_CANCELLED) return -EIDRM; /* Acquire mutex */ @@ -310,8 +343,8 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf, * rather then _irqsave */ spin_lock_irq(&ffs->ev.waitq.lock); - switch (FFS_SETUP_STATE(ffs)) { - case FFS_SETUP_CANCELED: + switch (ffs_setup_state_clear_cancelled(ffs)) { + case FFS_SETUP_CANCELLED: ret = -EIDRM; goto done_spin; @@ -346,7 +379,7 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf, /* * We are guaranteed to be still in FFS_ACTIVE state * but the state of setup could have changed from - * FFS_SETUP_PENDING to FFS_SETUP_CANCELED so we need + * FFS_SETUP_PENDING to FFS_SETUP_CANCELLED so we need * to check for that. If that happened we copied data * from user space in vain but it's unlikely. * @@ -355,7 +388,8 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf, * transition can be performed and it's protected by * mutex. */ - if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) { + if (ffs_setup_state_clear_cancelled(ffs) == + FFS_SETUP_CANCELLED) { ret = -EIDRM; done_spin: spin_unlock_irq(&ffs->ev.waitq.lock); @@ -421,7 +455,7 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf, ENTER(); /* Fast check if setup was canceled */ - if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) + if (ffs_setup_state_clear_cancelled(ffs) == FFS_SETUP_CANCELLED) return -EIDRM; /* Acquire mutex */ @@ -441,8 +475,8 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf, */ spin_lock_irq(&ffs->ev.waitq.lock); - switch (FFS_SETUP_STATE(ffs)) { - case FFS_SETUP_CANCELED: + switch (ffs_setup_state_clear_cancelled(ffs)) { + case FFS_SETUP_CANCELLED: ret = -EIDRM; break; @@ -489,7 +523,8 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf, spin_lock_irq(&ffs->ev.waitq.lock); /* See ffs_ep0_write() */ - if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) { + if (ffs_setup_state_clear_cancelled(ffs) == + FFS_SETUP_CANCELLED) { ret = -EIDRM; break; } @@ -558,6 +593,45 @@ static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value) return ret; } +static unsigned int ffs_ep0_poll(struct file *file, poll_table *wait) +{ + struct ffs_data *ffs = file->private_data; + unsigned int mask = POLLWRNORM; + int ret; + + poll_wait(file, &ffs->ev.waitq, wait); + + ret = ffs_mutex_lock(&ffs->mutex, file->f_flags & O_NONBLOCK); + if (unlikely(ret < 0)) + return mask; + + switch (ffs->state) { + case FFS_READ_DESCRIPTORS: + case FFS_READ_STRINGS: + mask |= POLLOUT; + break; + + case FFS_ACTIVE: + switch (ffs->setup_state) { + case FFS_NO_SETUP: + if (ffs->ev.count) + mask |= POLLIN; + break; + + case FFS_SETUP_PENDING: + case FFS_SETUP_CANCELLED: + mask |= (POLLIN | POLLOUT); + break; + } + case FFS_CLOSING: + break; + } + + mutex_unlock(&ffs->mutex); + + return mask; +} + static const struct file_operations ffs_ep0_operations = { .llseek = no_llseek, @@ -566,6 +640,7 @@ static const struct file_operations ffs_ep0_operations = { .read = ffs_ep0_read, .release = ffs_ep0_release, .unlocked_ioctl = ffs_ep0_ioctl, + .poll = ffs_ep0_poll, }; @@ -581,8 +656,52 @@ static void ffs_epfile_io_complete(struct usb_ep *_ep, struct usb_request *req) } } -static ssize_t ffs_epfile_io(struct file *file, - char __user *buf, size_t len, int read) +static void ffs_user_copy_worker(struct work_struct *work) +{ + struct ffs_io_data *io_data = container_of(work, struct ffs_io_data, + work); + int ret = io_data->req->status ? io_data->req->status : + io_data->req->actual; + + if (io_data->read && ret > 0) { + int i; + size_t pos = 0; + use_mm(io_data->mm); + for (i = 0; i < io_data->nr_segs; i++) { + if (unlikely(copy_to_user(io_data->iovec[i].iov_base, + &io_data->buf[pos], + io_data->iovec[i].iov_len))) { + ret = -EFAULT; + break; + } + pos += io_data->iovec[i].iov_len; + } + unuse_mm(io_data->mm); + } + + aio_complete(io_data->kiocb, ret, ret); + + usb_ep_free_request(io_data->ep, io_data->req); + + io_data->kiocb->private = NULL; + if (io_data->read) + kfree(io_data->iovec); + kfree(io_data->buf); + kfree(io_data); +} + +static void ffs_epfile_async_io_complete(struct usb_ep *_ep, + struct usb_request *req) +{ + struct ffs_io_data *io_data = req->context; + + ENTER(); + + INIT_WORK(&io_data->work, ffs_user_copy_worker); + schedule_work(&io_data->work); +} + +static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) { struct ffs_epfile *epfile = file->private_data; struct ffs_ep *ep; @@ -612,7 +731,7 @@ static ssize_t ffs_epfile_io(struct file *file, } /* Do we halt? */ - halt = !read == !epfile->in; + halt = (!io_data->read == !epfile->in); if (halt && epfile->isoc) { ret = -EINVAL; goto error; @@ -630,15 +749,32 @@ static ssize_t ffs_epfile_io(struct file *file, * Controller may require buffer size to be aligned to * maxpacketsize of an out endpoint. */ - data_len = read ? usb_ep_align_maybe(gadget, ep->ep, len) : len; + data_len = io_data->read ? + usb_ep_align_maybe(gadget, ep->ep, io_data->len) : + io_data->len; data = kmalloc(data_len, GFP_KERNEL); if (unlikely(!data)) return -ENOMEM; - - if (!read && unlikely(copy_from_user(data, buf, len))) { - ret = -EFAULT; - goto error; + if (io_data->aio && !io_data->read) { + int i; + size_t pos = 0; + for (i = 0; i < io_data->nr_segs; i++) { + if (unlikely(copy_from_user(&data[pos], + io_data->iovec[i].iov_base, + io_data->iovec[i].iov_len))) { + ret = -EFAULT; + goto error; + } + pos += io_data->iovec[i].iov_len; + } + } else { + if (!io_data->read && + unlikely(__copy_from_user(data, io_data->buf, + io_data->len))) { + ret = -EFAULT; + goto error; + } } } @@ -661,40 +797,74 @@ static ssize_t ffs_epfile_io(struct file *file, ret = -EBADMSG; } else { /* Fire the request */ - DECLARE_COMPLETION_ONSTACK(done); + struct usb_request *req; - struct usb_request *req = ep->req; - req->context = &done; - req->complete = ffs_epfile_io_complete; - req->buf = data; - req->length = data_len; + if (io_data->aio) { + req = usb_ep_alloc_request(ep->ep, GFP_KERNEL); + if (unlikely(!req)) + goto error; - ret = usb_ep_queue(ep->ep, req, GFP_ATOMIC); + req->buf = data; + req->length = io_data->len; - spin_unlock_irq(&epfile->ffs->eps_lock); + io_data->buf = data; + io_data->ep = ep->ep; + io_data->req = req; - if (unlikely(ret < 0)) { - /* nop */ - } else if (unlikely(wait_for_completion_interruptible(&done))) { - ret = -EINTR; - usb_ep_dequeue(ep->ep, req); + req->context = io_data; + req->complete = ffs_epfile_async_io_complete; + + ret = usb_ep_queue(ep->ep, req, GFP_ATOMIC); + if (unlikely(ret)) { + usb_ep_free_request(ep->ep, req); + goto error; + } + ret = -EIOCBQUEUED; + + spin_unlock_irq(&epfile->ffs->eps_lock); } else { - /* - * XXX We may end up silently droping data here. - * Since data_len (i.e. req->length) may be bigger - * than len (after being rounded up to maxpacketsize), - * we may end up with more data then user space has - * space for. - */ - ret = ep->status; - if (read && ret > 0 && - unlikely(copy_to_user(buf, data, - min_t(size_t, ret, len)))) - ret = -EFAULT; + DECLARE_COMPLETION_ONSTACK(done); + + req = ep->req; + req->buf = data; + req->length = io_data->len; + + req->context = &done; + req->complete = ffs_epfile_io_complete; + + ret = usb_ep_queue(ep->ep, req, GFP_ATOMIC); + + spin_unlock_irq(&epfile->ffs->eps_lock); + + if (unlikely(ret < 0)) { + /* nop */ + } else if (unlikely( + wait_for_completion_interruptible(&done))) { + ret = -EINTR; + usb_ep_dequeue(ep->ep, req); + } else { + /* + * XXX We may end up silently droping data + * here. Since data_len (i.e. req->length) may + * be bigger than len (after being rounded up + * to maxpacketsize), we may end up with more + * data then user space has space for. + */ + ret = ep->status; + if (io_data->read && ret > 0) { + ret = min_t(size_t, ret, io_data->len); + + if (unlikely(copy_to_user(io_data->buf, + data, ret))) + ret = -EFAULT; + } + } + kfree(data); } } mutex_unlock(&epfile->mutex); + return ret; error: kfree(data); return ret; @@ -704,17 +874,31 @@ static ssize_t ffs_epfile_write(struct file *file, const char __user *buf, size_t len, loff_t *ptr) { + struct ffs_io_data io_data; + ENTER(); - return ffs_epfile_io(file, (char __user *)buf, len, 0); + io_data.aio = false; + io_data.read = false; + io_data.buf = (char * __user)buf; + io_data.len = len; + + return ffs_epfile_io(file, &io_data); } static ssize_t ffs_epfile_read(struct file *file, char __user *buf, size_t len, loff_t *ptr) { + struct ffs_io_data io_data; + ENTER(); - return ffs_epfile_io(file, buf, len, 1); + io_data.aio = false; + io_data.read = true; + io_data.buf = buf; + io_data.len = len; + + return ffs_epfile_io(file, &io_data); } static int @@ -733,6 +917,89 @@ ffs_epfile_open(struct inode *inode, struct file *file) return 0; } +static int ffs_aio_cancel(struct kiocb *kiocb) +{ + struct ffs_io_data *io_data = kiocb->private; + struct ffs_epfile *epfile = kiocb->ki_filp->private_data; + int value; + + ENTER(); + + spin_lock_irq(&epfile->ffs->eps_lock); + + if (likely(io_data && io_data->ep && io_data->req)) + value = usb_ep_dequeue(io_data->ep, io_data->req); + else + value = -EINVAL; + + spin_unlock_irq(&epfile->ffs->eps_lock); + + return value; +} + +static ssize_t ffs_epfile_aio_write(struct kiocb *kiocb, + const struct iovec *iovec, + unsigned long nr_segs, loff_t loff) +{ + struct ffs_io_data *io_data; + + ENTER(); + + io_data = kmalloc(sizeof(*io_data), GFP_KERNEL); + if (unlikely(!io_data)) + return -ENOMEM; + + io_data->aio = true; + io_data->read = false; + io_data->kiocb = kiocb; + io_data->iovec = iovec; + io_data->nr_segs = nr_segs; + io_data->len = kiocb->ki_nbytes; + io_data->mm = current->mm; + + kiocb->private = io_data; + + kiocb_set_cancel_fn(kiocb, ffs_aio_cancel); + + return ffs_epfile_io(kiocb->ki_filp, io_data); +} + +static ssize_t ffs_epfile_aio_read(struct kiocb *kiocb, + const struct iovec *iovec, + unsigned long nr_segs, loff_t loff) +{ + struct ffs_io_data *io_data; + struct iovec *iovec_copy; + + ENTER(); + + iovec_copy = kmalloc_array(nr_segs, sizeof(*iovec_copy), GFP_KERNEL); + if (unlikely(!iovec_copy)) + return -ENOMEM; + + memcpy(iovec_copy, iovec, sizeof(struct iovec)*nr_segs); + + io_data = kmalloc(sizeof(*io_data), GFP_KERNEL); + if (unlikely(!io_data)) { + kfree(iovec_copy); + return -ENOMEM; + } + + io_data->aio = true; + io_data->read = true; + io_data->kiocb = kiocb; + io_data->iovec = iovec_copy; + io_data->nr_segs = nr_segs; + io_data->len = kiocb->ki_nbytes; + io_data->mm = current->mm; + + kiocb->private = io_data; + + kiocb_set_cancel_fn(kiocb, ffs_aio_cancel); + + return ffs_epfile_io(kiocb->ki_filp, io_data); +} + static int ffs_epfile_release(struct inode *inode, struct file *file) { @@ -789,6 +1056,8 @@ static const struct file_operations ffs_epfile_operations = { .open = ffs_epfile_open, .write = ffs_epfile_write, .read = ffs_epfile_read, + .aio_write = ffs_epfile_aio_write, + .aio_read = ffs_epfile_aio_read, .release = ffs_epfile_release, .unlocked_ioctl = ffs_epfile_ioctl, }; @@ -1172,7 +1441,7 @@ static void ffs_data_clear(struct ffs_data *ffs) if (ffs->epfiles) ffs_epfiles_destroy(ffs->epfiles, ffs->eps_count); - kfree(ffs->raw_descs); + kfree(ffs->raw_descs_data); kfree(ffs->raw_strings); kfree(ffs->stringtabs); } @@ -1184,14 +1453,15 @@ static void ffs_data_reset(struct ffs_data *ffs) ffs_data_clear(ffs); ffs->epfiles = NULL; + ffs->raw_descs_data = NULL; ffs->raw_descs = NULL; ffs->raw_strings = NULL; ffs->stringtabs = NULL; ffs->raw_descs_length = 0; - ffs->raw_fs_descs_length = 0; ffs->fs_descs_count = 0; ffs->hs_descs_count = 0; + ffs->ss_descs_count = 0; ffs->strings_count = 0; ffs->interfaces_count = 0; @@ -1334,7 +1604,24 @@ static int ffs_func_eps_enable(struct ffs_function *func) spin_lock_irqsave(&func->ffs->eps_lock, flags); do { struct usb_endpoint_descriptor *ds; - ds = ep->descs[ep->descs[1] ? 1 : 0]; + int desc_idx; + + if (ffs->gadget->speed == USB_SPEED_SUPER) + desc_idx = 2; + else if (ffs->gadget->speed == USB_SPEED_HIGH) + desc_idx = 1; + else + desc_idx = 0; + + /* fall-back to lower speed if desc missing for current speed */ + do { + ds = ep->descs[desc_idx]; + } while (!ds && --desc_idx >= 0); + + if (!ds) { + ret = -EINVAL; + break; + } ep->ep->driver_data = ep; ep->ep->desc = ds; @@ -1469,6 +1756,12 @@ static int __must_check ffs_do_desc(char *data, unsigned len, } break; + case USB_DT_SS_ENDPOINT_COMP: + pr_vdebug("EP SS companion descriptor\n"); + if (length != sizeof(struct usb_ss_ep_comp_descriptor)) + goto inv_length; + break; + case USB_DT_OTHER_SPEED_CONFIG: case USB_DT_INTERFACE_POWER: case USB_DT_DEBUG: @@ -1579,60 +1872,76 @@ static int __ffs_data_do_entity(enum ffs_entity_type type, static int __ffs_data_got_descs(struct ffs_data *ffs, char *const _data, size_t len) { - unsigned fs_count, hs_count; - int fs_len, ret = -EINVAL; - char *data = _data; + char *data = _data, *raw_descs; + unsigned counts[3], flags; + int ret = -EINVAL, i; ENTER(); - if (unlikely(get_unaligned_le32(data) != FUNCTIONFS_DESCRIPTORS_MAGIC || - get_unaligned_le32(data + 4) != len)) + if (get_unaligned_le32(data + 4) != len) goto error; - fs_count = get_unaligned_le32(data + 8); - hs_count = get_unaligned_le32(data + 12); - - if (!fs_count && !hs_count) - goto einval; - data += 16; - len -= 16; - - if (likely(fs_count)) { - fs_len = ffs_do_descs(fs_count, data, len, - __ffs_data_do_entity, ffs); - if (unlikely(fs_len < 0)) { - ret = fs_len; + switch (get_unaligned_le32(data)) { + case FUNCTIONFS_DESCRIPTORS_MAGIC: + flags = FUNCTIONFS_HAS_FS_DESC | FUNCTIONFS_HAS_HS_DESC; + data += 8; + len -= 8; + break; + case FUNCTIONFS_DESCRIPTORS_MAGIC_V2: + flags = get_unaligned_le32(data + 8); + if (flags & ~(FUNCTIONFS_HAS_FS_DESC | + FUNCTIONFS_HAS_HS_DESC | + FUNCTIONFS_HAS_SS_DESC)) { + ret = -ENOSYS; goto error; } + data += 12; + len -= 12; + break; + default: + goto error; + } - data += fs_len; - len -= fs_len; - } else { - fs_len = 0; + /* Read fs_count, hs_count and ss_count (if present) */ + for (i = 0; i < 3; ++i) { + if (!(flags & (1 << i))) { + counts[i] = 0; + } else if (len < 4) { + goto error; + } else { + counts[i] = get_unaligned_le32(data); + data += 4; + len -= 4; + } } - if (likely(hs_count)) { - ret = ffs_do_descs(hs_count, data, len, + /* Read descriptors */ + raw_descs = data; + for (i = 0; i < 3; ++i) { + if (!counts[i]) + continue; + ret = ffs_do_descs(counts[i], data, len, __ffs_data_do_entity, ffs); - if (unlikely(ret < 0)) + if (ret < 0) goto error; - } else { - ret = 0; + data += ret; + len -= ret; } - if (unlikely(len != ret)) - goto einval; + if (raw_descs == data || len) { + ret = -EINVAL; + goto error; + } - ffs->raw_fs_descs_length = fs_len; - ffs->raw_descs_length = fs_len + ret; - ffs->raw_descs = _data; - ffs->fs_descs_count = fs_count; - ffs->hs_descs_count = hs_count; + ffs->raw_descs_data = _data; + ffs->raw_descs = raw_descs; + ffs->raw_descs_length = data - raw_descs; + ffs->fs_descs_count = counts[0]; + ffs->hs_descs_count = counts[1]; + ffs->ss_descs_count = counts[2]; return 0; -einval: - ret = -EINVAL; error: kfree(_data); return ret; @@ -1789,7 +2098,7 @@ static void __ffs_event_add(struct ffs_data *ffs, * the source does nothing. */ if (ffs->setup_state == FFS_SETUP_PENDING) - ffs->setup_state = FFS_SETUP_CANCELED; + ffs->setup_state = FFS_SETUP_CANCELLED; switch (type) { case FUNCTIONFS_RESUME: @@ -1850,21 +2159,28 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep, struct usb_endpoint_descriptor *ds = (void *)desc; struct ffs_function *func = priv; struct ffs_ep *ffs_ep; - - /* - * If hs_descriptors is not NULL then we are reading hs - * descriptors now - */ - const int isHS = func->function.hs_descriptors != NULL; - unsigned idx; + unsigned ep_desc_id, idx; + static const char *speed_names[] = { "full", "high", "super" }; if (type != FFS_DESCRIPTOR) return 0; - if (isHS) + /* + * If ss_descriptors is not NULL, we are reading super speed + * descriptors; if hs_descriptors is not NULL, we are reading high + * speed descriptors; otherwise, we are reading full speed + * descriptors. + */ + if (func->function.ss_descriptors) { + ep_desc_id = 2; + func->function.ss_descriptors[(long)valuep] = desc; + } else if (func->function.hs_descriptors) { + ep_desc_id = 1; func->function.hs_descriptors[(long)valuep] = desc; - else + } else { + ep_desc_id = 0; func->function.fs_descriptors[(long)valuep] = desc; + } if (!desc || desc->bDescriptorType != USB_DT_ENDPOINT) return 0; @@ -1872,13 +2188,13 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep, idx = (ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) - 1; ffs_ep = func->eps + idx; - if (unlikely(ffs_ep->descs[isHS])) { - pr_vdebug("two %sspeed descriptors for EP %d\n", - isHS ? "high" : "full", + if (unlikely(ffs_ep->descs[ep_desc_id])) { + pr_err("two %sspeed descriptors for EP %d\n", + speed_names[ep_desc_id], ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); return -EINVAL; } - ffs_ep->descs[isHS] = ds; + ffs_ep->descs[ep_desc_id] = ds; ffs_dump_mem(": Original ep desc", ds, ds->bLength); if (ffs_ep->ep) { @@ -2022,8 +2338,10 @@ static int _ffs_func_bind(struct usb_configuration *c, const int full = !!func->ffs->fs_descs_count; const int high = gadget_is_dualspeed(func->gadget) && func->ffs->hs_descs_count; + const int super = gadget_is_superspeed(func->gadget) && + func->ffs->ss_descs_count; - int ret; + int fs_len, hs_len, ret; /* Make it a single chunk, less management later on */ vla_group(d); @@ -2032,15 +2350,16 @@ static int _ffs_func_bind(struct usb_configuration *c, full ? ffs->fs_descs_count + 1 : 0); vla_item_with_sz(d, struct usb_descriptor_header *, hs_descs, high ? ffs->hs_descs_count + 1 : 0); + vla_item_with_sz(d, struct usb_descriptor_header *, ss_descs, + super ? ffs->ss_descs_count + 1 : 0); vla_item_with_sz(d, short, inums, ffs->interfaces_count); - vla_item_with_sz(d, char, raw_descs, - high ? ffs->raw_descs_length : ffs->raw_fs_descs_length); + vla_item_with_sz(d, char, raw_descs, ffs->raw_descs_length); char *vlabuf; ENTER(); - /* Only high speed but not supported by gadget? */ - if (unlikely(!(full | high))) + /* Has descriptors only for speeds gadget does not support */ + if (unlikely(!(full | high | super))) return -ENOTSUPP; /* Allocate a single chunk, less management later on */ @@ -2050,8 +2369,10 @@ static int _ffs_func_bind(struct usb_configuration *c, /* Zero */ memset(vla_ptr(vlabuf, d, eps), 0, d_eps__sz); - memcpy(vla_ptr(vlabuf, d, raw_descs), ffs->raw_descs + 16, - d_raw_descs__sz); + /* Copy descriptors */ + memcpy(vla_ptr(vlabuf, d, raw_descs), ffs->raw_descs, + ffs->raw_descs_length); + memset(vla_ptr(vlabuf, d, inums), 0xff, d_inums__sz); for (ret = ffs->eps_count; ret; --ret) { struct ffs_ep *ptr; @@ -2073,22 +2394,38 @@ static int _ffs_func_bind(struct usb_configuration *c, */ if (likely(full)) { func->function.fs_descriptors = vla_ptr(vlabuf, d, fs_descs); - ret = ffs_do_descs(ffs->fs_descs_count, - vla_ptr(vlabuf, d, raw_descs), - d_raw_descs__sz, - __ffs_func_bind_do_descs, func); - if (unlikely(ret < 0)) + fs_len = ffs_do_descs(ffs->fs_descs_count, + vla_ptr(vlabuf, d, raw_descs), + d_raw_descs__sz, + __ffs_func_bind_do_descs, func); + if (unlikely(fs_len < 0)) { + ret = fs_len; goto error; + } } else { - ret = 0; + fs_len = 0; } if (likely(high)) { func->function.hs_descriptors = vla_ptr(vlabuf, d, hs_descs); - ret = ffs_do_descs(ffs->hs_descs_count, - vla_ptr(vlabuf, d, raw_descs) + ret, - d_raw_descs__sz - ret, - __ffs_func_bind_do_descs, func); + hs_len = ffs_do_descs(ffs->hs_descs_count, + vla_ptr(vlabuf, d, raw_descs) + fs_len, + d_raw_descs__sz - fs_len, + __ffs_func_bind_do_descs, func); + if (unlikely(hs_len < 0)) { + ret = hs_len; + goto error; + } + } else { + hs_len = 0; + } + + if (likely(super)) { + func->function.ss_descriptors = vla_ptr(vlabuf, d, ss_descs); + ret = ffs_do_descs(ffs->ss_descs_count, + vla_ptr(vlabuf, d, raw_descs) + fs_len + hs_len, + d_raw_descs__sz - fs_len - hs_len, + __ffs_func_bind_do_descs, func); if (unlikely(ret < 0)) goto error; } @@ -2099,7 +2436,8 @@ static int _ffs_func_bind(struct usb_configuration *c, * now. */ ret = ffs_do_descs(ffs->fs_descs_count + - (high ? ffs->hs_descs_count : 0), + (high ? ffs->hs_descs_count : 0) + + (super ? ffs->ss_descs_count : 0), vla_ptr(vlabuf, d, raw_descs), d_raw_descs__sz, __ffs_func_bind_do_nums, func); if (unlikely(ret < 0)) @@ -2258,7 +2596,7 @@ static int ffs_func_revmap_intf(struct ffs_function *func, u8 intf) static LIST_HEAD(ffs_devices); -static struct ffs_dev *_ffs_find_dev(const char *name) +static struct ffs_dev *_ffs_do_find_dev(const char *name) { struct ffs_dev *dev; @@ -2275,7 +2613,7 @@ static struct ffs_dev *_ffs_find_dev(const char *name) /* * ffs_lock must be taken by the caller of this function */ -static struct ffs_dev *ffs_get_single_dev(void) +static struct ffs_dev *_ffs_get_single_dev(void) { struct ffs_dev *dev; @@ -2291,15 +2629,15 @@ static struct ffs_dev *ffs_get_single_dev(void) /* * ffs_lock must be taken by the caller of this function */ -static struct ffs_dev *ffs_find_dev(const char *name) +static struct ffs_dev *_ffs_find_dev(const char *name) { struct ffs_dev *dev; - dev = ffs_get_single_dev(); + dev = _ffs_get_single_dev(); if (dev) return dev; - return _ffs_find_dev(name); + return _ffs_do_find_dev(name); } /* Configfs support *********************************************************/ @@ -2335,7 +2673,7 @@ static void ffs_free_inst(struct usb_function_instance *f) opts = to_f_fs_opts(f); ffs_dev_lock(); - ffs_free_dev(opts->dev); + _ffs_free_dev(opts->dev); ffs_dev_unlock(); kfree(opts); } @@ -2390,7 +2728,7 @@ static struct usb_function_instance *ffs_alloc_inst(void) opts->func_inst.set_inst_name = ffs_set_inst_name; opts->func_inst.free_func_inst = ffs_free_inst; ffs_dev_lock(); - dev = ffs_alloc_dev(); + dev = _ffs_alloc_dev(); ffs_dev_unlock(); if (IS_ERR(dev)) { kfree(opts); @@ -2446,6 +2784,7 @@ static void ffs_func_unbind(struct usb_configuration *c, */ func->function.fs_descriptors = NULL; func->function.hs_descriptors = NULL; + func->function.ss_descriptors = NULL; func->interfaces_nums = NULL; ffs_event_add(ffs, FUNCTIONFS_UNBIND); @@ -2478,12 +2817,12 @@ static struct usb_function *ffs_alloc(struct usb_function_instance *fi) /* * ffs_lock must be taken by the caller of this function */ -struct ffs_dev *ffs_alloc_dev(void) +static struct ffs_dev *_ffs_alloc_dev(void) { struct ffs_dev *dev; int ret; - if (ffs_get_single_dev()) + if (_ffs_get_single_dev()) return ERR_PTR(-EBUSY); dev = kzalloc(sizeof(*dev), GFP_KERNEL); @@ -2511,10 +2850,10 @@ static int _ffs_name_dev(struct ffs_dev *dev, const char *name) { struct ffs_dev *existing; - existing = _ffs_find_dev(name); + existing = _ffs_do_find_dev(name); if (existing) return -EBUSY; - + dev->name = name; return 0; @@ -2555,7 +2894,7 @@ EXPORT_SYMBOL(ffs_single_dev); /* * ffs_lock must be taken by the caller of this function */ -void ffs_free_dev(struct ffs_dev *dev) +static void _ffs_free_dev(struct ffs_dev *dev) { list_del(&dev->entry); if (dev->name_allocated) @@ -2572,7 +2911,7 @@ static void *ffs_acquire_dev(const char *dev_name) ENTER(); ffs_dev_lock(); - ffs_dev = ffs_find_dev(dev_name); + ffs_dev = _ffs_find_dev(dev_name); if (!ffs_dev) ffs_dev = ERR_PTR(-ENODEV); else if (ffs_dev->mounted) @@ -2595,11 +2934,12 @@ static void ffs_release_dev(struct ffs_data *ffs_data) ffs_dev_lock(); ffs_dev = ffs_data->private_data; - if (ffs_dev) + if (ffs_dev) { ffs_dev->mounted = false; - - if (ffs_dev->ffs_release_dev_callback) - ffs_dev->ffs_release_dev_callback(ffs_dev); + + if (ffs_dev->ffs_release_dev_callback) + ffs_dev->ffs_release_dev_callback(ffs_dev); + } ffs_dev_unlock(); } diff --git a/drivers/usb/gadget/gr_udc.c b/drivers/usb/gadget/gr_udc.c index 914cbd84ee40..f984ee75324d 100644 --- a/drivers/usb/gadget/gr_udc.c +++ b/drivers/usb/gadget/gr_udc.c @@ -225,14 +225,8 @@ static void gr_dfs_create(struct gr_udc *dev) const char *name = "gr_udc_state"; dev->dfs_root = debugfs_create_dir(dev_name(dev->dev), NULL); - if (IS_ERR(dev->dfs_root)) { - dev_err(dev->dev, "Failed to create debugfs directory\n"); - return; - } - dev->dfs_state = debugfs_create_file(name, 0444, dev->dfs_root, - dev, &gr_dfs_fops); - if (IS_ERR(dev->dfs_state)) - dev_err(dev->dev, "Failed to create debugfs file %s\n", name); + dev->dfs_state = debugfs_create_file(name, 0444, dev->dfs_root, dev, + &gr_dfs_fops); } static void gr_dfs_delete(struct gr_udc *dev) diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 69b76efd11e9..6474081dcbaf 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -427,12 +427,17 @@ setup_rx_reqs(struct printer_dev *dev) req->length = USB_BUFSIZE; req->complete = rx_complete; + /* here, we unlock, and only unlock, to avoid deadlock. */ + spin_unlock(&dev->lock); error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC); + spin_lock(&dev->lock); if (error) { DBG(dev, "rx submit --> %d\n", error); list_add(&req->list, &dev->rx_reqs); break; - } else { + } + /* if the req is empty, then add it into dev->rx_reqs_active. */ + else if (list_empty(&req->list)) { list_add(&req->list, &dev->rx_reqs_active); } } @@ -1133,6 +1138,7 @@ static int __init printer_bind_config(struct usb_configuration *c) NULL, "g_printer"); if (IS_ERR(dev->pdev)) { ERROR(dev, "Failed to create device: g_printer\n"); + status = PTR_ERR(dev->pdev); goto fail; } diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 1172eaeddd85..2a9cb674926a 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -617,7 +617,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, to_write = DIV_ROUND_UP(to_write, 4); data = hs_req->req.buf + buf_pos; - writesl(hsotg->regs + EPFIFO(hs_ep->index), data, to_write); + iowrite32_rep(hsotg->regs + EPFIFO(hs_ep->index), data, to_write); return (to_write >= can_write) ? -ENOSPC : 0; } @@ -720,8 +720,8 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, ureq->length, ureq->actual); if (0) dev_dbg(hsotg->dev, - "REQ buf %p len %d dma 0x%08x noi=%d zp=%d snok=%d\n", - ureq->buf, length, ureq->dma, + "REQ buf %p len %d dma 0x%pad noi=%d zp=%d snok=%d\n", + ureq->buf, length, &ureq->dma, ureq->no_interrupt, ureq->zero, ureq->short_not_ok); maxreq = get_ep_limit(hs_ep); @@ -789,8 +789,8 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index); writel(ureq->dma, hsotg->regs + dma_reg); - dev_dbg(hsotg->dev, "%s: 0x%08x => 0x%08x\n", - __func__, ureq->dma, dma_reg); + dev_dbg(hsotg->dev, "%s: 0x%pad => 0x%08x\n", + __func__, &ureq->dma, dma_reg); } ctrl |= DxEPCTL_EPEna; /* ensure ep enabled */ @@ -1186,6 +1186,41 @@ static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg); static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg); /** + * s3c_hsotg_stall_ep0 - stall ep0 + * @hsotg: The device state + * + * Set stall for ep0 as response for setup request. + */ +static void s3c_hsotg_stall_ep0(struct s3c_hsotg *hsotg) { + struct s3c_hsotg_ep *ep0 = &hsotg->eps[0]; + u32 reg; + u32 ctrl; + + dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in); + reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0; + + /* + * DxEPCTL_Stall will be cleared by EP once it has + * taken effect, so no need to clear later. + */ + + ctrl = readl(hsotg->regs + reg); + ctrl |= DxEPCTL_Stall; + ctrl |= DxEPCTL_CNAK; + writel(ctrl, hsotg->regs + reg); + + dev_dbg(hsotg->dev, + "written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n", + ctrl, reg, readl(hsotg->regs + reg)); + + /* + * complete won't be called, so we enqueue + * setup request here + */ + s3c_hsotg_enqueue_setup(hsotg); +} + +/** * s3c_hsotg_process_control - process a control request * @hsotg: The device state * @ctrl: The control request received @@ -1262,38 +1297,8 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, * so respond with a STALL for the status stage to indicate failure. */ - if (ret < 0) { - u32 reg; - u32 ctrl; - - dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in); - reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0; - - /* - * DxEPCTL_Stall will be cleared by EP once it has - * taken effect, so no need to clear later. - */ - - ctrl = readl(hsotg->regs + reg); - ctrl |= DxEPCTL_Stall; - ctrl |= DxEPCTL_CNAK; - writel(ctrl, hsotg->regs + reg); - - dev_dbg(hsotg->dev, - "written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n", - ctrl, reg, readl(hsotg->regs + reg)); - - /* - * don't believe we need to anything more to get the EP - * to reply with a STALL packet - */ - - /* - * complete won't be called, so we enqueue - * setup request here - */ - s3c_hsotg_enqueue_setup(hsotg); - } + if (ret < 0) + s3c_hsotg_stall_ep0(hsotg); } /** @@ -1488,7 +1493,7 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) * note, we might over-write the buffer end by 3 bytes depending on * alignment of the data. */ - readsl(fifo, hs_req->req.buf + read_ptr, to_read); + ioread32_rep(fifo, hs_req->req.buf + read_ptr, to_read); } /** @@ -2832,6 +2837,15 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value) dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value); + if (index == 0) { + if (value) + s3c_hsotg_stall_ep0(hs); + else + dev_warn(hs->dev, + "%s: can't clear halt on ep0\n", __func__); + return 0; + } + /* write both IN and OUT control registers */ epreg = DIEPCTL(index); @@ -3760,10 +3774,55 @@ static int s3c_hsotg_remove(struct platform_device *pdev) return 0; } -#if 1 -#define s3c_hsotg_suspend NULL -#define s3c_hsotg_resume NULL -#endif +static int s3c_hsotg_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct s3c_hsotg *hsotg = platform_get_drvdata(pdev); + unsigned long flags; + int ret = 0; + + if (hsotg->driver) + dev_info(hsotg->dev, "suspending usb gadget %s\n", + hsotg->driver->driver.name); + + spin_lock_irqsave(&hsotg->lock, flags); + s3c_hsotg_disconnect(hsotg); + s3c_hsotg_phy_disable(hsotg); + hsotg->gadget.speed = USB_SPEED_UNKNOWN; + spin_unlock_irqrestore(&hsotg->lock, flags); + + if (hsotg->driver) { + int ep; + for (ep = 0; ep < hsotg->num_of_eps; ep++) + s3c_hsotg_ep_disable(&hsotg->eps[ep].ep); + + ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + } + + return ret; +} + +static int s3c_hsotg_resume(struct platform_device *pdev) +{ + struct s3c_hsotg *hsotg = platform_get_drvdata(pdev); + unsigned long flags; + int ret = 0; + + if (hsotg->driver) { + dev_info(hsotg->dev, "resuming usb gadget %s\n", + hsotg->driver->driver.name); + ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + } + + spin_lock_irqsave(&hsotg->lock, flags); + hsotg->last_rst = jiffies; + s3c_hsotg_phy_enable(hsotg); + s3c_hsotg_core_init(hsotg); + spin_unlock_irqrestore(&hsotg->lock, flags); + + return ret; +} #ifdef CONFIG_OF static const struct of_device_id s3c_hsotg_of_ids[] = { diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index ea4bbfe72ec0..10c6a128250c 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -1344,7 +1344,6 @@ static int s3c_hsudc_probe(struct platform_device *pdev) return 0; err_add_udc: -err_add_device: clk_disable(hsudc->uclk); err_res: if (!IS_ERR_OR_NULL(hsudc->transceiver)) diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index b7d4f82872b7..50d09c289137 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -48,6 +48,8 @@ #define UETH__VERSION "29-May-2008" +#define GETHER_NAPI_WEIGHT 32 + struct eth_dev { /* lock is held while accessing port_usb */ @@ -72,6 +74,7 @@ struct eth_dev { struct sk_buff_head *list); struct work_struct work; + struct napi_struct rx_napi; unsigned long todo; #define WORK_RX_MEMORY 0 @@ -253,18 +256,16 @@ enomem: DBG(dev, "rx submit --> %d\n", retval); if (skb) dev_kfree_skb_any(skb); - spin_lock_irqsave(&dev->req_lock, flags); - list_add(&req->list, &dev->rx_reqs); - spin_unlock_irqrestore(&dev->req_lock, flags); } return retval; } static void rx_complete(struct usb_ep *ep, struct usb_request *req) { - struct sk_buff *skb = req->context, *skb2; + struct sk_buff *skb = req->context; struct eth_dev *dev = ep->driver_data; int status = req->status; + bool rx_queue = 0; switch (status) { @@ -288,30 +289,8 @@ static void rx_complete(struct usb_ep *ep, struct usb_request *req) } else { skb_queue_tail(&dev->rx_frames, skb); } - skb = NULL; - - skb2 = skb_dequeue(&dev->rx_frames); - while (skb2) { - if (status < 0 - || ETH_HLEN > skb2->len - || skb2->len > VLAN_ETH_FRAME_LEN) { - dev->net->stats.rx_errors++; - dev->net->stats.rx_length_errors++; - DBG(dev, "rx length %d\n", skb2->len); - dev_kfree_skb_any(skb2); - goto next_frame; - } - skb2->protocol = eth_type_trans(skb2, dev->net); - dev->net->stats.rx_packets++; - dev->net->stats.rx_bytes += skb2->len; - - /* no buffer copies needed, unless hardware can't - * use skb buffers. - */ - status = netif_rx(skb2); -next_frame: - skb2 = skb_dequeue(&dev->rx_frames); - } + if (!status) + rx_queue = 1; break; /* software-driven interface shutdown */ @@ -334,22 +313,20 @@ quiesce: /* FALLTHROUGH */ default: + rx_queue = 1; + dev_kfree_skb_any(skb); dev->net->stats.rx_errors++; DBG(dev, "rx status %d\n", status); break; } - if (skb) - dev_kfree_skb_any(skb); - if (!netif_running(dev->net)) { clean: spin_lock(&dev->req_lock); list_add(&req->list, &dev->rx_reqs); spin_unlock(&dev->req_lock); - req = NULL; - } - if (req) - rx_submit(dev, req, GFP_ATOMIC); + + if (rx_queue && likely(napi_schedule_prep(&dev->rx_napi))) + __napi_schedule(&dev->rx_napi); } static int prealloc(struct list_head *list, struct usb_ep *ep, unsigned n) @@ -414,16 +391,24 @@ static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags) { struct usb_request *req; unsigned long flags; + int rx_counts = 0; /* fill unused rxq slots with some skb */ spin_lock_irqsave(&dev->req_lock, flags); while (!list_empty(&dev->rx_reqs)) { + + if (++rx_counts > qlen(dev->gadget, dev->qmult)) + break; + req = container_of(dev->rx_reqs.next, struct usb_request, list); list_del_init(&req->list); spin_unlock_irqrestore(&dev->req_lock, flags); if (rx_submit(dev, req, gfp_flags) < 0) { + spin_lock_irqsave(&dev->req_lock, flags); + list_add(&req->list, &dev->rx_reqs); + spin_unlock_irqrestore(&dev->req_lock, flags); defer_kevent(dev, WORK_RX_MEMORY); return; } @@ -433,6 +418,41 @@ static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags) spin_unlock_irqrestore(&dev->req_lock, flags); } +static int gether_poll(struct napi_struct *napi, int budget) +{ + struct eth_dev *dev = container_of(napi, struct eth_dev, rx_napi); + struct sk_buff *skb; + unsigned int work_done = 0; + int status = 0; + + while ((skb = skb_dequeue(&dev->rx_frames))) { + if (status < 0 + || ETH_HLEN > skb->len + || skb->len > VLAN_ETH_FRAME_LEN) { + dev->net->stats.rx_errors++; + dev->net->stats.rx_length_errors++; + DBG(dev, "rx length %d\n", skb->len); + dev_kfree_skb_any(skb); + continue; + } + skb->protocol = eth_type_trans(skb, dev->net); + dev->net->stats.rx_packets++; + dev->net->stats.rx_bytes += skb->len; + + status = netif_rx_ni(skb); + } + + if (netif_running(dev->net)) { + rx_fill(dev, GFP_KERNEL); + work_done++; + } + + if (work_done < budget) + napi_complete(&dev->rx_napi); + + return work_done; +} + static void eth_work(struct work_struct *work) { struct eth_dev *dev = container_of(work, struct eth_dev, work); @@ -625,6 +645,7 @@ static void eth_start(struct eth_dev *dev, gfp_t gfp_flags) /* and open the tx floodgates */ atomic_set(&dev->tx_qlen, 0); netif_wake_queue(dev->net); + napi_enable(&dev->rx_napi); } static int eth_open(struct net_device *net) @@ -651,6 +672,7 @@ static int eth_stop(struct net_device *net) unsigned long flags; VDBG(dev, "%s\n", __func__); + napi_disable(&dev->rx_napi); netif_stop_queue(net); DBG(dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n", @@ -768,6 +790,7 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g, return ERR_PTR(-ENOMEM); dev = netdev_priv(net); + netif_napi_add(net, &dev->rx_napi, gether_poll, GETHER_NAPI_WEIGHT); spin_lock_init(&dev->lock); spin_lock_init(&dev->req_lock); INIT_WORK(&dev->work, eth_work); @@ -830,6 +853,7 @@ struct net_device *gether_setup_name_default(const char *netname) return ERR_PTR(-ENOMEM); dev = netdev_priv(net); + netif_napi_add(net, &dev->rx_napi, gether_poll, GETHER_NAPI_WEIGHT); spin_lock_init(&dev->lock); spin_lock_init(&dev->req_lock); INIT_WORK(&dev->work, eth_work); @@ -1113,6 +1137,7 @@ void gether_disconnect(struct gether *link) { struct eth_dev *dev = link->ioport; struct usb_request *req; + struct sk_buff *skb; WARN_ON(!dev); if (!dev) @@ -1139,6 +1164,12 @@ void gether_disconnect(struct gether *link) spin_lock(&dev->req_lock); } spin_unlock(&dev->req_lock); + + spin_lock(&dev->rx_frames.lock); + while ((skb = __skb_dequeue(&dev->rx_frames))) + dev_kfree_skb_any(skb); + spin_unlock(&dev->rx_frames.lock); + link->in_ep->driver_data = NULL; link->in_ep->desc = NULL; diff --git a/drivers/usb/gadget/u_fs.h b/drivers/usb/gadget/u_fs.h index bc2d3718219b..bf0ba375d459 100644 --- a/drivers/usb/gadget/u_fs.h +++ b/drivers/usb/gadget/u_fs.h @@ -65,10 +65,8 @@ static inline void ffs_dev_unlock(void) mutex_unlock(&ffs_lock); } -struct ffs_dev *ffs_alloc_dev(void); int ffs_name_dev(struct ffs_dev *dev, const char *name); int ffs_single_dev(struct ffs_dev *dev); -void ffs_free_dev(struct ffs_dev *dev); struct ffs_epfile; struct ffs_function; @@ -125,7 +123,7 @@ enum ffs_setup_state { * setup. If this state is set read/write on ep0 return * -EIDRM. This state is only set when adding event. */ - FFS_SETUP_CANCELED + FFS_SETUP_CANCELLED }; struct ffs_data { @@ -156,7 +154,6 @@ struct ffs_data { */ struct usb_request *ep0req; /* P: mutex */ struct completion ep0req_completion; /* P: mutex */ - int ep0req_status; /* P: mutex */ /* reference counter */ atomic_t ref; @@ -168,19 +165,18 @@ struct ffs_data { /* * Possible transitions: - * + FFS_NO_SETUP -> FFS_SETUP_PENDING -- P: ev.waitq.lock + * + FFS_NO_SETUP -> FFS_SETUP_PENDING -- P: ev.waitq.lock * happens only in ep0 read which is P: mutex - * + FFS_SETUP_PENDING -> FFS_NO_SETUP -- P: ev.waitq.lock + * + FFS_SETUP_PENDING -> FFS_NO_SETUP -- P: ev.waitq.lock * happens only in ep0 i/o which is P: mutex - * + FFS_SETUP_PENDING -> FFS_SETUP_CANCELED -- P: ev.waitq.lock - * + FFS_SETUP_CANCELED -> FFS_NO_SETUP -- cmpxchg + * + FFS_SETUP_PENDING -> FFS_SETUP_CANCELLED -- P: ev.waitq.lock + * + FFS_SETUP_CANCELLED -> FFS_NO_SETUP -- cmpxchg + * + * This field should never be accessed directly and instead + * ffs_setup_state_clear_cancelled function should be used. */ enum ffs_setup_state setup_state; -#define FFS_SETUP_STATE(ffs) \ - ((enum ffs_setup_state)cmpxchg(&(ffs)->setup_state, \ - FFS_SETUP_CANCELED, FFS_NO_SETUP)) - /* Events & such. */ struct { u8 types[4]; @@ -210,16 +206,16 @@ struct ffs_data { /* filled by __ffs_data_got_descs() */ /* - * Real descriptors are 16 bytes after raw_descs (so you need - * to skip 16 bytes (ie. ffs->raw_descs + 16) to get to the - * first full speed descriptor). raw_descs_length and - * raw_fs_descs_length do not have those 16 bytes added. + * raw_descs is what you kfree, real_descs points inside of raw_descs, + * where full speed, high speed and super speed descriptors start. + * real_descs_length is the length of all those descriptors. */ + const void *raw_descs_data; const void *raw_descs; unsigned raw_descs_length; - unsigned raw_fs_descs_length; unsigned fs_descs_count; unsigned hs_descs_count; + unsigned ss_descs_count; unsigned short strings_count; unsigned short interfaces_count; diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 688dc8bb192d..8b789792f6fa 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -43,6 +43,7 @@ config USB_MUSB_HOST config USB_MUSB_GADGET bool "Gadget only mode" depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC + depends on HAS_DMA help Select this when you want to use MUSB in gadget mode only, thereby the host feature will be regressed. @@ -50,6 +51,7 @@ config USB_MUSB_GADGET config USB_MUSB_DUAL_ROLE bool "Dual Role mode" depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC)) + depends on HAS_DMA help This is the default mode of working of MUSB controller where both host and gadget features are enabled. diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 239ad0b1ceb6..07576907e2c6 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -438,7 +438,6 @@ void musb_hnp_stop(struct musb *musb) static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, u8 devctl) { - struct usb_otg *otg = musb->xceiv->otg; irqreturn_t handled = IRQ_NONE; dev_dbg(musb->controller, "<== DevCtl=%02x, int_usb=0x%x\n", devctl, @@ -656,7 +655,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, break; case OTG_STATE_B_PERIPHERAL: musb_g_suspend(musb); - musb->is_active = otg->gadget->b_hnp_enable; + musb->is_active = musb->g.b_hnp_enable; if (musb->is_active) { musb->xceiv->state = OTG_STATE_B_WAIT_ACON; dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n"); @@ -672,7 +671,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, break; case OTG_STATE_A_HOST: musb->xceiv->state = OTG_STATE_A_SUSPEND; - musb->is_active = otg->host->b_hnp_enable; + musb->is_active = musb->hcd->self.b_hnp_enable; break; case OTG_STATE_B_HOST: /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index f88929609bac..7b8bbf53127e 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -39,6 +39,7 @@ struct cppi41_dma_channel { u32 transferred; u32 packet_sz; struct list_head tx_check; + struct work_struct dma_completion; }; #define MUSB_DMA_NUM_CHANNELS 15 @@ -112,6 +113,18 @@ static bool musb_is_tx_fifo_empty(struct musb_hw_ep *hw_ep) return true; } +static bool is_isoc(struct musb_hw_ep *hw_ep, bool in) +{ + if (in && hw_ep->in_qh) { + if (hw_ep->in_qh->type == USB_ENDPOINT_XFER_ISOC) + return true; + } else if (hw_ep->out_qh) { + if (hw_ep->out_qh->type == USB_ENDPOINT_XFER_ISOC) + return true; + } + return false; +} + static void cppi41_dma_callback(void *private_data); static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel) @@ -119,7 +132,8 @@ static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel) struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep; struct musb *musb = hw_ep->musb; - if (!cppi41_channel->prog_len) { + if (!cppi41_channel->prog_len || + (cppi41_channel->channel.status == MUSB_DMA_STATUS_FREE)) { /* done, complete */ cppi41_channel->channel.actual_len = @@ -165,6 +179,32 @@ static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel) } } +static void cppi_trans_done_work(struct work_struct *work) +{ + unsigned long flags; + struct cppi41_dma_channel *cppi41_channel = + container_of(work, struct cppi41_dma_channel, dma_completion); + struct cppi41_dma_controller *controller = cppi41_channel->controller; + struct musb *musb = controller->musb; + struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep; + bool empty; + + if (!cppi41_channel->is_tx && is_isoc(hw_ep, 1)) { + spin_lock_irqsave(&musb->lock, flags); + cppi41_trans_done(cppi41_channel); + spin_unlock_irqrestore(&musb->lock, flags); + } else { + empty = musb_is_tx_fifo_empty(hw_ep); + if (empty) { + spin_lock_irqsave(&musb->lock, flags); + cppi41_trans_done(cppi41_channel); + spin_unlock_irqrestore(&musb->lock, flags); + } else { + schedule_work(&cppi41_channel->dma_completion); + } + } +} + static enum hrtimer_restart cppi41_recheck_tx_req(struct hrtimer *timer) { struct cppi41_dma_controller *controller; @@ -228,6 +268,14 @@ static void cppi41_dma_callback(void *private_data) transferred < cppi41_channel->packet_sz) cppi41_channel->prog_len = 0; + if (!cppi41_channel->is_tx) { + if (is_isoc(hw_ep, 1)) + schedule_work(&cppi41_channel->dma_completion); + else + cppi41_trans_done(cppi41_channel); + goto out; + } + empty = musb_is_tx_fifo_empty(hw_ep); if (empty) { cppi41_trans_done(cppi41_channel); @@ -264,6 +312,10 @@ static void cppi41_dma_callback(void *private_data) goto out; } } + if (is_isoc(hw_ep, 0)) { + schedule_work(&cppi41_channel->dma_completion); + goto out; + } list_add_tail(&cppi41_channel->tx_check, &controller->early_tx_list); if (!hrtimer_active(&controller->early_tx)) { @@ -448,12 +500,25 @@ static int cppi41_dma_channel_program(struct dma_channel *channel, dma_addr_t dma_addr, u32 len) { int ret; + struct cppi41_dma_channel *cppi41_channel = channel->private_data; + int hb_mult = 0; BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN || channel->status == MUSB_DMA_STATUS_BUSY); + if (is_host_active(cppi41_channel->controller->musb)) { + if (cppi41_channel->is_tx) + hb_mult = cppi41_channel->hw_ep->out_qh->hb_mult; + else + hb_mult = cppi41_channel->hw_ep->in_qh->hb_mult; + } + channel->status = MUSB_DMA_STATUS_BUSY; channel->actual_len = 0; + + if (hb_mult) + packet_sz = hb_mult * (packet_sz & 0x7FF); + ret = cppi41_configure_channel(channel, packet_sz, mode, dma_addr, len); if (!ret) channel->status = MUSB_DMA_STATUS_FREE; @@ -607,6 +672,8 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller) cppi41_channel->port_num = port; cppi41_channel->is_tx = is_tx; INIT_LIST_HEAD(&cppi41_channel->tx_check); + INIT_WORK(&cppi41_channel->dma_completion, + cppi_trans_done_work); musb_dma = &cppi41_channel->channel; musb_dma->private_data = cppi41_channel; diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 7a109eae9b9a..3372ded5def7 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -45,6 +45,8 @@ #include <linux/of_irq.h> #include <linux/usb/of.h> +#include <linux/debugfs.h> + #include "musb_core.h" static const struct of_device_id musb_dsps_of_match[]; @@ -136,6 +138,26 @@ struct dsps_glue { unsigned long last_timer; /* last timer data for each instance */ struct dsps_context context; + struct debugfs_regset32 regset; + struct dentry *dbgfs_root; +}; + +static const struct debugfs_reg32 dsps_musb_regs[] = { + { "revision", 0x00 }, + { "control", 0x14 }, + { "status", 0x18 }, + { "eoi", 0x24 }, + { "intr0_stat", 0x30 }, + { "intr1_stat", 0x34 }, + { "intr0_set", 0x38 }, + { "intr1_set", 0x3c }, + { "txmode", 0x70 }, + { "rxmode", 0x74 }, + { "autoreq", 0xd0 }, + { "srpfixtime", 0xd4 }, + { "tdown", 0xd8 }, + { "phy_utmi", 0xe0 }, + { "mode", 0xe8 }, }; static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) @@ -368,6 +390,30 @@ out: return ret; } +static int dsps_musb_dbg_init(struct musb *musb, struct dsps_glue *glue) +{ + struct dentry *root; + struct dentry *file; + char buf[128]; + + sprintf(buf, "%s.dsps", dev_name(musb->controller)); + root = debugfs_create_dir(buf, NULL); + if (!root) + return -ENOMEM; + glue->dbgfs_root = root; + + glue->regset.regs = dsps_musb_regs; + glue->regset.nregs = ARRAY_SIZE(dsps_musb_regs); + glue->regset.base = musb->ctrl_base; + + file = debugfs_create_regset32("regdump", S_IRUGO, root, &glue->regset); + if (!file) { + debugfs_remove_recursive(root); + return -ENOMEM; + } + return 0; +} + static int dsps_musb_init(struct musb *musb) { struct device *dev = musb->controller; @@ -377,6 +423,7 @@ static int dsps_musb_init(struct musb *musb) void __iomem *reg_base; struct resource *r; u32 rev, val; + int ret; r = platform_get_resource_byname(parent, IORESOURCE_MEM, "control"); if (!r) @@ -410,6 +457,10 @@ static int dsps_musb_init(struct musb *musb) val &= ~(1 << wrp->otg_disable); dsps_writel(musb->ctrl_base, wrp->phy_utmi, val); + ret = dsps_musb_dbg_init(musb, glue); + if (ret) + return ret; + return 0; } @@ -616,7 +667,7 @@ static int dsps_probe(struct platform_device *pdev) wrp = match->data; /* allocate glue */ - glue = kzalloc(sizeof(*glue), GFP_KERNEL); + glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); if (!glue) { dev_err(&pdev->dev, "unable to allocate glue memory\n"); return -ENOMEM; @@ -644,7 +695,6 @@ err3: pm_runtime_put(&pdev->dev); err2: pm_runtime_disable(&pdev->dev); - kfree(glue); return ret; } @@ -657,7 +707,9 @@ static int dsps_remove(struct platform_device *pdev) /* disable usbss clocks */ pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); - kfree(glue); + + debugfs_remove_recursive(glue->dbgfs_root); + return 0; } diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index abb38c3833ef..eb06291a40c8 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1694,7 +1694,8 @@ void musb_host_rx(struct musb *musb, u8 epnum) | MUSB_RXCSR_RXPKTRDY); musb_writew(hw_ep->regs, MUSB_RXCSR, val); -#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) +#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) || \ + defined(CONFIG_USB_TI_CPPI41_DMA) if (usb_pipeisoc(pipe)) { struct usb_iso_packet_descriptor *d; @@ -1707,10 +1708,30 @@ void musb_host_rx(struct musb *musb, u8 epnum) if (d->status != -EILSEQ && d->status != -EOVERFLOW) d->status = 0; - if (++qh->iso_idx >= urb->number_of_packets) + if (++qh->iso_idx >= urb->number_of_packets) { done = true; - else + } else { +#if defined(CONFIG_USB_TI_CPPI41_DMA) + struct dma_controller *c; + dma_addr_t *buf; + u32 length, ret; + + c = musb->dma_controller; + buf = (void *) + urb->iso_frame_desc[qh->iso_idx].offset + + (u32)urb->transfer_dma; + + length = + urb->iso_frame_desc[qh->iso_idx].length; + + val |= MUSB_RXCSR_DMAENAB; + musb_writew(hw_ep->regs, MUSB_RXCSR, val); + + ret = c->channel_program(dma, qh->maxpacket, + 0, (u32) buf, length); +#endif done = false; + } } else { /* done if urb buffer is full or short packet is recd */ @@ -1750,7 +1771,8 @@ void musb_host_rx(struct musb *musb, u8 epnum) } /* we are expecting IN packets */ -#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) +#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) || \ + defined(CONFIG_USB_TI_CPPI41_DMA) if (dma) { struct dma_controller *c; u16 rx_count; diff --git a/drivers/usb/phy/phy-fsm-usb.c b/drivers/usb/phy/phy-fsm-usb.c index 7aa314ef4a8a..c47e5a6edde2 100644 --- a/drivers/usb/phy/phy-fsm-usb.c +++ b/drivers/usb/phy/phy-fsm-usb.c @@ -317,10 +317,12 @@ int otg_statemachine(struct otg_fsm *fsm) otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); break; case OTG_STATE_A_HOST: - if ((!fsm->a_bus_req || fsm->a_suspend_req_inf) && + if (fsm->id || fsm->a_bus_drop) + otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); + else if ((!fsm->a_bus_req || fsm->a_suspend_req_inf) && fsm->otg->host->b_hnp_enable) otg_set_state(fsm, OTG_STATE_A_SUSPEND); - else if (fsm->id || !fsm->b_conn || fsm->a_bus_drop) + else if (!fsm->b_conn) otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); else if (!fsm->a_vbus_vld) otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); @@ -346,8 +348,7 @@ int otg_statemachine(struct otg_fsm *fsm) otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); break; case OTG_STATE_A_WAIT_VFALL: - if (fsm->a_wait_vfall_tmout || fsm->id || fsm->a_bus_req || - (!fsm->a_sess_vld && !fsm->b_conn)) + if (fsm->a_wait_vfall_tmout) otg_set_state(fsm, OTG_STATE_A_IDLE); break; case OTG_STATE_A_VBUS_ERR: diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index b42897b6474c..c42bdf0c4a1f 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -1,5 +1,5 @@ /* - * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012-2013 Freescale Semiconductor, Inc. * Copyright (C) 2012 Marek Vasut <marex@denx.de> * on behalf of DENX Software Engineering GmbH * @@ -20,6 +20,9 @@ #include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> #define DRIVER_NAME "mxs_phy" @@ -28,18 +31,134 @@ #define HW_USBPHY_CTRL_SET 0x34 #define HW_USBPHY_CTRL_CLR 0x38 +#define HW_USBPHY_DEBUG_SET 0x54 +#define HW_USBPHY_DEBUG_CLR 0x58 + +#define HW_USBPHY_IP 0x90 +#define HW_USBPHY_IP_SET 0x94 +#define HW_USBPHY_IP_CLR 0x98 + #define BM_USBPHY_CTRL_SFTRST BIT(31) #define BM_USBPHY_CTRL_CLKGATE BIT(30) +#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS BIT(26) +#define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE BIT(25) +#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP BIT(23) +#define BM_USBPHY_CTRL_ENIDCHG_WKUP BIT(22) +#define BM_USBPHY_CTRL_ENDPDMCHG_WKUP BIT(21) +#define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD BIT(20) +#define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE BIT(19) +#define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL BIT(18) #define BM_USBPHY_CTRL_ENUTMILEVEL3 BIT(15) #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) +#define BM_USBPHY_IP_FIX (BIT(17) | BIT(18)) + +#define BM_USBPHY_DEBUG_CLKGATE BIT(30) + +/* Anatop Registers */ +#define ANADIG_ANA_MISC0 0x150 +#define ANADIG_ANA_MISC0_SET 0x154 +#define ANADIG_ANA_MISC0_CLR 0x158 + +#define ANADIG_USB1_VBUS_DET_STAT 0x1c0 +#define ANADIG_USB2_VBUS_DET_STAT 0x220 + +#define ANADIG_USB1_LOOPBACK_SET 0x1e4 +#define ANADIG_USB1_LOOPBACK_CLR 0x1e8 +#define ANADIG_USB2_LOOPBACK_SET 0x244 +#define ANADIG_USB2_LOOPBACK_CLR 0x248 + +#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG BIT(12) +#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11) + +#define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3) +#define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID BIT(3) + +#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 BIT(2) +#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN BIT(5) +#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 BIT(2) +#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN BIT(5) + +#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) + +/* Do disconnection between PHY and controller without vbus */ +#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS BIT(0) + +/* + * The PHY will be in messy if there is a wakeup after putting + * bus to suspend (set portsc.suspendM) but before setting PHY to low + * power mode (set portsc.phcd). + */ +#define MXS_PHY_ABNORMAL_IN_SUSPEND BIT(1) + +/* + * The SOF sends too fast after resuming, it will cause disconnection + * between host and high speed device. + */ +#define MXS_PHY_SENDING_SOF_TOO_FAST BIT(2) + +/* + * IC has bug fixes logic, they include + * MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST + * which are described at above flags, the RTL will handle it + * according to different versions. + */ +#define MXS_PHY_NEED_IP_FIX BIT(3) + +struct mxs_phy_data { + unsigned int flags; +}; + +static const struct mxs_phy_data imx23_phy_data = { + .flags = MXS_PHY_ABNORMAL_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST, +}; + +static const struct mxs_phy_data imx6q_phy_data = { + .flags = MXS_PHY_SENDING_SOF_TOO_FAST | + MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS | + MXS_PHY_NEED_IP_FIX, +}; + +static const struct mxs_phy_data imx6sl_phy_data = { + .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS | + MXS_PHY_NEED_IP_FIX, +}; + +static const struct of_device_id mxs_phy_dt_ids[] = { + { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, + { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, }, + { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); + struct mxs_phy { struct usb_phy phy; struct clk *clk; + const struct mxs_phy_data *data; + struct regmap *regmap_anatop; + int port_id; }; -#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) +static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy) +{ + return mxs_phy->data == &imx6q_phy_data; +} + +static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy) +{ + return mxs_phy->data == &imx6sl_phy_data; +} + +/* + * PHY needs some 32K cycles to switch from 32K clock to + * bus (such as AHB/AXI, etc) clock. + */ +static void mxs_phy_clock_switch_delay(void) +{ + usleep_range(300, 400); +} static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) { @@ -53,19 +172,105 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) /* Power up the PHY */ writel(0, base + HW_USBPHY_PWD); - /* enable FS/LS device */ - writel(BM_USBPHY_CTRL_ENUTMILEVEL2 | - BM_USBPHY_CTRL_ENUTMILEVEL3, + /* + * USB PHY Ctrl Setting + * - Auto clock/power on + * - Enable full/low speed support + */ + writel(BM_USBPHY_CTRL_ENAUTOSET_USBCLKS | + BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE | + BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD | + BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE | + BM_USBPHY_CTRL_ENAUTO_PWRON_PLL | + BM_USBPHY_CTRL_ENUTMILEVEL2 | + BM_USBPHY_CTRL_ENUTMILEVEL3, base + HW_USBPHY_CTRL_SET); + if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX) + writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET); + return 0; } +/* Return true if the vbus is there */ +static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy) +{ + unsigned int vbus_value; + + if (mxs_phy->port_id == 0) + regmap_read(mxs_phy->regmap_anatop, + ANADIG_USB1_VBUS_DET_STAT, + &vbus_value); + else if (mxs_phy->port_id == 1) + regmap_read(mxs_phy->regmap_anatop, + ANADIG_USB2_VBUS_DET_STAT, + &vbus_value); + + if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID) + return true; + else + return false; +} + +static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect) +{ + void __iomem *base = mxs_phy->phy.io_priv; + u32 reg; + + if (disconnect) + writel_relaxed(BM_USBPHY_DEBUG_CLKGATE, + base + HW_USBPHY_DEBUG_CLR); + + if (mxs_phy->port_id == 0) { + reg = disconnect ? ANADIG_USB1_LOOPBACK_SET + : ANADIG_USB1_LOOPBACK_CLR; + regmap_write(mxs_phy->regmap_anatop, reg, + BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 | + BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN); + } else if (mxs_phy->port_id == 1) { + reg = disconnect ? ANADIG_USB2_LOOPBACK_SET + : ANADIG_USB2_LOOPBACK_CLR; + regmap_write(mxs_phy->regmap_anatop, reg, + BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 | + BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN); + } + + if (!disconnect) + writel_relaxed(BM_USBPHY_DEBUG_CLKGATE, + base + HW_USBPHY_DEBUG_SET); + + /* Delay some time, and let Linestate be SE0 for controller */ + if (disconnect) + usleep_range(500, 1000); +} + +static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on) +{ + bool vbus_is_on = false; + + /* If the SoCs don't need to disconnect line without vbus, quit */ + if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS)) + return; + + /* If the SoCs don't have anatop, quit */ + if (!mxs_phy->regmap_anatop) + return; + + vbus_is_on = mxs_phy_get_vbus_status(mxs_phy); + + if (on && !vbus_is_on) + __mxs_phy_disconnect_line(mxs_phy, true); + else + __mxs_phy_disconnect_line(mxs_phy, false); + +} + static int mxs_phy_init(struct usb_phy *phy) { int ret; struct mxs_phy *mxs_phy = to_mxs_phy(phy); + mxs_phy_clock_switch_delay(); ret = clk_prepare_enable(mxs_phy->clk); if (ret) return ret; @@ -94,6 +299,7 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend) x->io_priv + HW_USBPHY_CTRL_SET); clk_disable_unprepare(mxs_phy->clk); } else { + mxs_phy_clock_switch_delay(); ret = clk_prepare_enable(mxs_phy->clk); if (ret) return ret; @@ -105,11 +311,28 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend) return 0; } +static int mxs_phy_set_wakeup(struct usb_phy *x, bool enabled) +{ + struct mxs_phy *mxs_phy = to_mxs_phy(x); + u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP | + BM_USBPHY_CTRL_ENDPDMCHG_WKUP | + BM_USBPHY_CTRL_ENIDCHG_WKUP; + if (enabled) { + mxs_phy_disconnect_line(mxs_phy, true); + writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_SET); + } else { + writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_CLR); + mxs_phy_disconnect_line(mxs_phy, false); + } + + return 0; +} + static int mxs_phy_on_connect(struct usb_phy *phy, enum usb_device_speed speed) { - dev_dbg(phy->dev, "%s speed device has connected\n", - (speed == USB_SPEED_HIGH) ? "high" : "non-high"); + dev_dbg(phy->dev, "%s device has connected\n", + (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS"); if (speed == USB_SPEED_HIGH) writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, @@ -121,8 +344,8 @@ static int mxs_phy_on_connect(struct usb_phy *phy, static int mxs_phy_on_disconnect(struct usb_phy *phy, enum usb_device_speed speed) { - dev_dbg(phy->dev, "%s speed device has disconnected\n", - (speed == USB_SPEED_HIGH) ? "high" : "non-high"); + dev_dbg(phy->dev, "%s device has disconnected\n", + (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS"); if (speed == USB_SPEED_HIGH) writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, @@ -138,6 +361,9 @@ static int mxs_phy_probe(struct platform_device *pdev) struct clk *clk; struct mxs_phy *mxs_phy; int ret; + const struct of_device_id *of_id = + of_match_device(mxs_phy_dt_ids, &pdev->dev); + struct device_node *np = pdev->dev.of_node; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(&pdev->dev, res); @@ -157,6 +383,22 @@ static int mxs_phy_probe(struct platform_device *pdev) return -ENOMEM; } + /* Some SoCs don't have anatop registers */ + if (of_get_property(np, "fsl,anatop", NULL)) { + mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle + (np, "fsl,anatop"); + if (IS_ERR(mxs_phy->regmap_anatop)) { + dev_dbg(&pdev->dev, + "failed to find regmap for anatop\n"); + return PTR_ERR(mxs_phy->regmap_anatop); + } + } + + ret = of_alias_get_id(np, "usbphy"); + if (ret < 0) + dev_dbg(&pdev->dev, "failed to get alias id, errno %d\n", ret); + mxs_phy->port_id = ret; + mxs_phy->phy.io_priv = base; mxs_phy->phy.dev = &pdev->dev; mxs_phy->phy.label = DRIVER_NAME; @@ -166,11 +408,15 @@ static int mxs_phy_probe(struct platform_device *pdev) mxs_phy->phy.notify_connect = mxs_phy_on_connect; mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect; mxs_phy->phy.type = USB_PHY_TYPE_USB2; + mxs_phy->phy.set_wakeup = mxs_phy_set_wakeup; mxs_phy->clk = clk; + mxs_phy->data = of_id->data; platform_set_drvdata(pdev, mxs_phy); + device_set_wakeup_capable(&pdev->dev, true); + ret = usb_add_phy_dev(&mxs_phy->phy); if (ret) return ret; @@ -187,11 +433,46 @@ static int mxs_phy_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id mxs_phy_dt_ids[] = { - { .compatible = "fsl,imx23-usbphy", }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); +#ifdef CONFIG_PM_SLEEP +static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on) +{ + unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR; + + /* If the SoCs don't have anatop, quit */ + if (!mxs_phy->regmap_anatop) + return; + + if (is_imx6q_phy(mxs_phy)) + regmap_write(mxs_phy->regmap_anatop, reg, + BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG); + else if (is_imx6sl_phy(mxs_phy)) + regmap_write(mxs_phy->regmap_anatop, + reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL); +} + +static int mxs_phy_system_suspend(struct device *dev) +{ + struct mxs_phy *mxs_phy = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + mxs_phy_enable_ldo_in_suspend(mxs_phy, true); + + return 0; +} + +static int mxs_phy_system_resume(struct device *dev) +{ + struct mxs_phy *mxs_phy = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + mxs_phy_enable_ldo_in_suspend(mxs_phy, false); + + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend, + mxs_phy_system_resume); static struct platform_driver mxs_phy_driver = { .probe = mxs_phy_probe, @@ -200,6 +481,7 @@ static struct platform_driver mxs_phy_driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, .of_match_table = mxs_phy_dt_ids, + .pm = &mxs_phy_pm, }, }; diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c index 551e0a6c0e22..388d89f6b141 100644 --- a/drivers/usb/phy/phy-rcar-gen2-usb.c +++ b/drivers/usb/phy/phy-rcar-gen2-usb.c @@ -177,15 +177,15 @@ static int rcar_gen2_usb_phy_probe(struct platform_device *pdev) struct clk *clk; int retval; - pdata = dev_get_platdata(&pdev->dev); + pdata = dev_get_platdata(dev); if (!pdata) { dev_err(dev, "No platform data\n"); return -EINVAL; } - clk = devm_clk_get(&pdev->dev, "usbhs"); + clk = devm_clk_get(dev, "usbhs"); if (IS_ERR(clk)) { - dev_err(&pdev->dev, "Can't get the clock\n"); + dev_err(dev, "Can't get the clock\n"); return PTR_ERR(clk); } diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h index 6c0b1c513db7..353053a33f21 100644 --- a/include/linux/usb/phy.h +++ b/include/linux/usb/phy.h @@ -111,6 +111,13 @@ struct usb_phy { int (*set_suspend)(struct usb_phy *x, int suspend); + /* + * Set wakeup enable for PHY, in that case, the PHY can be + * woken up from suspend status due to external events, + * like vbus change, dp/dm change and id. + */ + int (*set_wakeup)(struct usb_phy *x, bool enabled); + /* notify phy connect status change */ int (*notify_connect)(struct usb_phy *x, enum usb_device_speed speed); @@ -265,6 +272,15 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend) } static inline int +usb_phy_set_wakeup(struct usb_phy *x, bool enabled) +{ + if (x && x->set_wakeup) + return x->set_wakeup(x, enabled); + else + return 0; +} + +static inline int usb_phy_notify_connect(struct usb_phy *x, enum usb_device_speed speed) { if (x && x->notify_connect) diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h index d6b01283f85c..2a4b4a72a4f9 100644 --- a/include/uapi/linux/usb/functionfs.h +++ b/include/uapi/linux/usb/functionfs.h @@ -10,9 +10,15 @@ enum { FUNCTIONFS_DESCRIPTORS_MAGIC = 1, - FUNCTIONFS_STRINGS_MAGIC = 2 + FUNCTIONFS_STRINGS_MAGIC = 2, + FUNCTIONFS_DESCRIPTORS_MAGIC_V2 = 3, }; +enum functionfs_flags { + FUNCTIONFS_HAS_FS_DESC = 1, + FUNCTIONFS_HAS_HS_DESC = 2, + FUNCTIONFS_HAS_SS_DESC = 4, +}; #ifndef __KERNEL__ @@ -29,29 +35,39 @@ struct usb_endpoint_descriptor_no_audio { /* - * All numbers must be in little endian order. - */ - -struct usb_functionfs_descs_head { - __le32 magic; - __le32 length; - __le32 fs_count; - __le32 hs_count; -} __attribute__((packed)); - -/* * Descriptors format: * * | off | name | type | description | * |-----+-----------+--------------+--------------------------------------| - * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC | + * | 0 | magic | LE32 | FUNCTIONFS_DESCRIPTORS_MAGIC_V2 | + * | 4 | length | LE32 | length of the whole data chunk | + * | 8 | flags | LE32 | combination of functionfs_flags | + * | | fs_count | LE32 | number of full-speed descriptors | + * | | hs_count | LE32 | number of high-speed descriptors | + * | | ss_count | LE32 | number of super-speed descriptors | + * | | fs_descrs | Descriptor[] | list of full-speed descriptors | + * | | hs_descrs | Descriptor[] | list of high-speed descriptors | + * | | ss_descrs | Descriptor[] | list of super-speed descriptors | + * + * Depending on which flags are set, various fields may be missing in the + * structure. Any flags that are not recognised cause the whole block to be + * rejected with -ENOSYS. + * + * Legacy descriptors format: + * + * | off | name | type | description | + * |-----+-----------+--------------+--------------------------------------| + * | 0 | magic | LE32 | FUNCTIONFS_DESCRIPTORS_MAGIC | * | 4 | length | LE32 | length of the whole data chunk | * | 8 | fs_count | LE32 | number of full-speed descriptors | * | 12 | hs_count | LE32 | number of high-speed descriptors | * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors | * | | hs_descrs | Descriptor[] | list of high-speed descriptors | * - * descs are just valid USB descriptors and have the following format: + * All numbers must be in little endian order. + * + * Descriptor[] is an array of valid USB descriptors which have the following + * format: * * | off | name | type | description | * |-----+-----------------+------+--------------------------| |