summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/ata/ahci-platform.txt9
-rw-r--r--drivers/ata/Kconfig2
-rw-r--r--drivers/ata/ahci.h6
-rw-r--r--drivers/ata/ahci_da850.c11
-rw-r--r--drivers/ata/ahci_imx.c25
-rw-r--r--drivers/ata/ahci_mvebu.c11
-rw-r--r--drivers/ata/ahci_platform.c11
-rw-r--r--drivers/ata/ahci_st.c11
-rw-r--r--drivers/ata/ahci_sunxi.c11
-rw-r--r--drivers/ata/ahci_tegra.c11
-rw-r--r--drivers/ata/ahci_xgene.c203
-rw-r--r--drivers/ata/libahci_platform.c249
-rw-r--r--drivers/ata/libata-core.c27
-rw-r--r--drivers/ata/libata-eh.c1
-rw-r--r--drivers/ata/libata-scsi.c4
-rw-r--r--drivers/ata/libata.h1
-rw-r--r--drivers/ata/pata_cs5530.c6
-rw-r--r--drivers/ata/pata_of_platform.c10
-rw-r--r--drivers/ata/pata_pdc2027x.c10
-rw-r--r--drivers/ata/pata_platform.c8
-rw-r--r--drivers/ata/sata_dwc_460ex.c116
-rw-r--r--drivers/ata/sata_mv.c6
-rw-r--r--drivers/ata/sata_rcar.c25
-rw-r--r--include/linux/ahci_platform.h6
-rw-r--r--include/linux/ata.h2
-rw-r--r--include/linux/ata_platform.h5
-rw-r--r--include/linux/libata.h6
27 files changed, 563 insertions, 230 deletions
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 4ab09f2202d4..c2340eeeb97f 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -37,9 +37,10 @@ Required properties when using sub-nodes:
Sub-nodes required properties:
-- reg : the port number
-- phys : reference to the SATA PHY node
-
+- reg : the port number
+And at least one of the following properties:
+- phys : reference to the SATA PHY node
+- target-supply : regulator for SATA target power
Examples:
sata@ffe08000 {
@@ -68,10 +69,12 @@ With sub-nodes:
sata0: sata-port@0 {
reg = <0>;
phys = <&sata_phy 0>;
+ target-supply = <&reg_sata0>;
};
sata1: sata-port@1 {
reg = <1>;
phys = <&sata_phy 1>;
+ target-supply = <&reg_sata1>;;
};
};
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 5f601553b9b0..e7f338a3a3c2 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -269,7 +269,7 @@ config ATA_PIIX
config SATA_DWC
tristate "DesignWare Cores SATA support"
- depends on 460EX
+ depends on 460EX || (COMPILE_TEST && !(ARM || ARM64))
help
This option enables support for the on-chip SATA controller of the
AppliedMicro processor 460EX.
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 40f0e34f17af..71262e08648e 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -333,7 +333,7 @@ struct ahci_host_priv {
u32 em_msg_type; /* EM message type */
bool got_runtime_pm; /* Did we do pm_runtime_get? */
struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
- struct regulator *target_pwr; /* Optional */
+ struct regulator **target_pwrs; /* Optional */
/*
* If platform uses PHYs. There is a 1:1 relation between the port number and
* the PHY position in this array.
@@ -354,6 +354,10 @@ extern int ahci_ignore_sss;
extern struct device_attribute *ahci_shost_attrs[];
extern struct device_attribute *ahci_sdev_attrs[];
+/*
+ * This must be instantiated by the edge drivers. Read the comments
+ * for ATA_BASE_SHT
+ */
#define AHCI_SHT(drv_name) \
ATA_NCQ_SHT(drv_name), \
.can_queue = AHCI_MAX_CMDS - 1, \
diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c
index ce8a7a6d6c7f..267a3d3e79f4 100644
--- a/drivers/ata/ahci_da850.c
+++ b/drivers/ata/ahci_da850.c
@@ -16,6 +16,8 @@
#include <linux/ahci_platform.h>
#include "ahci.h"
+#define DRV_NAME "ahci_da850"
+
/* SATA PHY Control Register offset from AHCI base */
#define SATA_P0PHYCR_REG 0x178
@@ -59,6 +61,10 @@ static const struct ata_port_info ahci_da850_port_info = {
.port_ops = &ahci_platform_ops,
};
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT(DRV_NAME),
+};
+
static int ahci_da850_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -85,7 +91,8 @@ static int ahci_da850_probe(struct platform_device *pdev)
da850_sata_init(dev, pwrdn_reg, hpriv->mmio);
- rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info);
+ rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info,
+ &ahci_platform_sht);
if (rc)
goto disable_resources;
@@ -102,7 +109,7 @@ static struct platform_driver ahci_da850_driver = {
.probe = ahci_da850_probe,
.remove = ata_platform_remove_one,
.driver = {
- .name = "ahci_da850",
+ .name = DRV_NAME,
.pm = &ahci_da850_pm_ops,
},
};
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 35d51c59a370..3f3a7db208ae 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -28,6 +28,8 @@
#include <linux/libata.h>
#include "ahci.h"
+#define DRV_NAME "ahci-imx"
+
enum {
/* Timer 1-ms Register */
IMX_TIMER1MS = 0x00e0,
@@ -221,11 +223,9 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv)
if (imxpriv->no_device)
return 0;
- if (hpriv->target_pwr) {
- ret = regulator_enable(hpriv->target_pwr);
- if (ret)
- return ret;
- }
+ ret = ahci_platform_enable_regulators(hpriv);
+ if (ret)
+ return ret;
ret = clk_prepare_enable(imxpriv->sata_ref_clk);
if (ret < 0)
@@ -270,8 +270,7 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv)
disable_clk:
clk_disable_unprepare(imxpriv->sata_ref_clk);
disable_regulator:
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
+ ahci_platform_disable_regulators(hpriv);
return ret;
}
@@ -291,8 +290,7 @@ static void imx_sata_disable(struct ahci_host_priv *hpriv)
clk_disable_unprepare(imxpriv->sata_ref_clk);
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
+ ahci_platform_disable_regulators(hpriv);
}
static void ahci_imx_error_handler(struct ata_port *ap)
@@ -524,6 +522,10 @@ static u32 imx_ahci_parse_props(struct device *dev,
return reg_value;
}
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT(DRV_NAME),
+};
+
static int imx_ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -620,7 +622,8 @@ static int imx_ahci_probe(struct platform_device *pdev)
reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000;
writel(reg_val, hpriv->mmio + IMX_TIMER1MS);
- ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info);
+ ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info,
+ &ahci_platform_sht);
if (ret)
goto disable_sata;
@@ -678,7 +681,7 @@ static struct platform_driver imx_ahci_driver = {
.probe = imx_ahci_probe,
.remove = ata_platform_remove_one,
.driver = {
- .name = "ahci-imx",
+ .name = DRV_NAME,
.of_match_table = imx_ahci_of_match,
.pm = &ahci_imx_pm_ops,
},
diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c
index 64bb08432b69..23716dd8a7ec 100644
--- a/drivers/ata/ahci_mvebu.c
+++ b/drivers/ata/ahci_mvebu.c
@@ -19,6 +19,8 @@
#include <linux/platform_device.h>
#include "ahci.h"
+#define DRV_NAME "ahci-mvebu"
+
#define AHCI_VENDOR_SPECIFIC_0_ADDR 0xa0
#define AHCI_VENDOR_SPECIFIC_0_DATA 0xa4
@@ -67,6 +69,10 @@ static const struct ata_port_info ahci_mvebu_port_info = {
.port_ops = &ahci_platform_ops,
};
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT(DRV_NAME),
+};
+
static int ahci_mvebu_probe(struct platform_device *pdev)
{
struct ahci_host_priv *hpriv;
@@ -88,7 +94,8 @@ static int ahci_mvebu_probe(struct platform_device *pdev)
ahci_mvebu_mbus_config(hpriv, dram);
ahci_mvebu_regret_option(hpriv);
- rc = ahci_platform_init_host(pdev, hpriv, &ahci_mvebu_port_info);
+ rc = ahci_platform_init_host(pdev, hpriv, &ahci_mvebu_port_info,
+ &ahci_platform_sht);
if (rc)
goto disable_resources;
@@ -114,7 +121,7 @@ static struct platform_driver ahci_mvebu_driver = {
.probe = ahci_mvebu_probe,
.remove = ata_platform_remove_one,
.driver = {
- .name = "ahci-mvebu",
+ .name = DRV_NAME,
.of_match_table = ahci_mvebu_of_match,
},
};
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 18d539837045..78d6ae0b90c4 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -22,6 +22,8 @@
#include <linux/ahci_platform.h>
#include "ahci.h"
+#define DRV_NAME "ahci"
+
static const struct ata_port_info ahci_port_info = {
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
@@ -29,6 +31,10 @@ static const struct ata_port_info ahci_port_info = {
.port_ops = &ahci_platform_ops,
};
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT(DRV_NAME),
+};
+
static int ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -46,7 +52,8 @@ static int ahci_probe(struct platform_device *pdev)
if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci"))
hpriv->flags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ;
- rc = ahci_platform_init_host(pdev, hpriv, &ahci_port_info);
+ rc = ahci_platform_init_host(pdev, hpriv, &ahci_port_info,
+ &ahci_platform_sht);
if (rc)
goto disable_resources;
@@ -75,7 +82,7 @@ static struct platform_driver ahci_driver = {
.probe = ahci_probe,
.remove = ata_platform_remove_one,
.driver = {
- .name = "ahci",
+ .name = DRV_NAME,
.of_match_table = ahci_of_match,
.pm = &ahci_pm_ops,
},
diff --git a/drivers/ata/ahci_st.c b/drivers/ata/ahci_st.c
index 2f9e8317cc16..bc971af262e7 100644
--- a/drivers/ata/ahci_st.c
+++ b/drivers/ata/ahci_st.c
@@ -23,6 +23,8 @@
#include "ahci.h"
+#define DRV_NAME "st_ahci"
+
#define ST_AHCI_OOBR 0xbc
#define ST_AHCI_OOBR_WE BIT(31)
#define ST_AHCI_OOBR_CWMIN_SHIFT 24
@@ -140,6 +142,10 @@ static const struct ata_port_info st_ahci_port_info = {
.port_ops = &st_ahci_port_ops,
};
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT(DRV_NAME),
+};
+
static int st_ahci_probe(struct platform_device *pdev)
{
struct st_ahci_drv_data *drv_data;
@@ -166,7 +172,8 @@ static int st_ahci_probe(struct platform_device *pdev)
if (err)
return err;
- err = ahci_platform_init_host(pdev, hpriv, &st_ahci_port_info);
+ err = ahci_platform_init_host(pdev, hpriv, &st_ahci_port_info,
+ &ahci_platform_sht);
if (err) {
ahci_platform_disable_resources(hpriv);
return err;
@@ -229,7 +236,7 @@ MODULE_DEVICE_TABLE(of, st_ahci_match);
static struct platform_driver st_ahci_driver = {
.driver = {
- .name = "st_ahci",
+ .name = DRV_NAME,
.pm = &st_ahci_pm_ops,
.of_match_table = of_match_ptr(st_ahci_match),
},
diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c
index e2e0da539a2f..b26437430163 100644
--- a/drivers/ata/ahci_sunxi.c
+++ b/drivers/ata/ahci_sunxi.c
@@ -27,6 +27,8 @@
#include <linux/regulator/consumer.h>
#include "ahci.h"
+#define DRV_NAME "ahci-sunxi"
+
/* Insmod parameters */
static bool enable_pmp;
module_param(enable_pmp, bool, 0);
@@ -169,6 +171,10 @@ static const struct ata_port_info ahci_sunxi_port_info = {
.port_ops = &ahci_platform_ops,
};
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT(DRV_NAME),
+};
+
static int ahci_sunxi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -200,7 +206,8 @@ static int ahci_sunxi_probe(struct platform_device *pdev)
if (!enable_pmp)
hpriv->flags |= AHCI_HFLAG_NO_PMP;
- rc = ahci_platform_init_host(pdev, hpriv, &ahci_sunxi_port_info);
+ rc = ahci_platform_init_host(pdev, hpriv, &ahci_sunxi_port_info,
+ &ahci_platform_sht);
if (rc)
goto disable_resources;
@@ -251,7 +258,7 @@ static struct platform_driver ahci_sunxi_driver = {
.probe = ahci_sunxi_probe,
.remove = ata_platform_remove_one,
.driver = {
- .name = "ahci-sunxi",
+ .name = DRV_NAME,
.of_match_table = ahci_sunxi_of_match,
.pm = &ahci_sunxi_pm_ops,
},
diff --git a/drivers/ata/ahci_tegra.c b/drivers/ata/ahci_tegra.c
index 032904402c95..3a62eb246d80 100644
--- a/drivers/ata/ahci_tegra.c
+++ b/drivers/ata/ahci_tegra.c
@@ -31,6 +31,8 @@
#include "ahci.h"
+#define DRV_NAME "tegra-ahci"
+
#define SATA_CONFIGURATION_0 0x180
#define SATA_CONFIGURATION_EN_FPCI BIT(0)
@@ -289,6 +291,10 @@ static const struct of_device_id tegra_ahci_of_match[] = {
};
MODULE_DEVICE_TABLE(of, tegra_ahci_of_match);
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT(DRV_NAME),
+};
+
static int tegra_ahci_probe(struct platform_device *pdev)
{
struct ahci_host_priv *hpriv;
@@ -354,7 +360,8 @@ static int tegra_ahci_probe(struct platform_device *pdev)
if (ret)
return ret;
- ret = ahci_platform_init_host(pdev, hpriv, &ahci_tegra_port_info);
+ ret = ahci_platform_init_host(pdev, hpriv, &ahci_tegra_port_info,
+ &ahci_platform_sht);
if (ret)
goto deinit_controller;
@@ -370,7 +377,7 @@ static struct platform_driver tegra_ahci_driver = {
.probe = tegra_ahci_probe,
.remove = ata_platform_remove_one,
.driver = {
- .name = "tegra-ahci",
+ .name = DRV_NAME,
.of_match_table = tegra_ahci_of_match,
},
/* LP0 suspend support not implemented */
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index cbcd20810355..2e8bb603e447 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -30,6 +30,8 @@
#include <linux/phy/phy.h>
#include "ahci.h"
+#define DRV_NAME "xgene-ahci"
+
/* Max # of disk per a controller */
#define MAX_AHCI_CHN_PERCTR 2
@@ -85,6 +87,7 @@ struct xgene_ahci_context {
struct ahci_host_priv *hpriv;
struct device *dev;
u8 last_cmd[MAX_AHCI_CHN_PERCTR]; /* tracking the last command issued*/
+ u32 class[MAX_AHCI_CHN_PERCTR]; /* tracking the class of device */
void __iomem *csr_core; /* Core CSR address of IP */
void __iomem *csr_diag; /* Diag CSR address of IP */
void __iomem *csr_axi; /* AXI CSR address of IP */
@@ -105,17 +108,69 @@ static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx)
}
/**
+ * xgene_ahci_poll_reg_val- Poll a register on a specific value.
+ * @ap : ATA port of interest.
+ * @reg : Register of interest.
+ * @val : Value to be attained.
+ * @interval : waiting interval for polling.
+ * @timeout : timeout for achieving the value.
+ */
+static int xgene_ahci_poll_reg_val(struct ata_port *ap,
+ void __iomem *reg, unsigned
+ int val, unsigned long interval,
+ unsigned long timeout)
+{
+ unsigned long deadline;
+ unsigned int tmp;
+
+ tmp = ioread32(reg);
+ deadline = ata_deadline(jiffies, timeout);
+
+ while (tmp != val && time_before(jiffies, deadline)) {
+ ata_msleep(ap, interval);
+ tmp = ioread32(reg);
+ }
+
+ return tmp;
+}
+
+/**
* xgene_ahci_restart_engine - Restart the dma engine.
* @ap : ATA port of interest
*
- * Restarts the dma engine inside the controller.
+ * Waits for completion of multiple commands and restarts
+ * the DMA engine inside the controller.
*/
static int xgene_ahci_restart_engine(struct ata_port *ap)
{
struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 fbs;
+
+ /*
+ * In case of PMP multiple IDENTIFY DEVICE commands can be
+ * issued inside PxCI. So need to poll PxCI for the
+ * completion of outstanding IDENTIFY DEVICE commands before
+ * we restart the DMA engine.
+ */
+ if (xgene_ahci_poll_reg_val(ap, port_mmio +
+ PORT_CMD_ISSUE, 0x0, 1, 100))
+ return -EBUSY;
ahci_stop_engine(ap);
ahci_start_fis_rx(ap);
+
+ /*
+ * Enable the PxFBS.FBS_EN bit as it
+ * gets cleared due to stopping the engine.
+ */
+ if (pp->fbs_supported) {
+ fbs = readl(port_mmio + PORT_FBS);
+ writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS);
+ fbs = readl(port_mmio + PORT_FBS);
+ }
+
hpriv->start_engine(ap);
return 0;
@@ -125,11 +180,17 @@ static int xgene_ahci_restart_engine(struct ata_port *ap)
* xgene_ahci_qc_issue - Issue commands to the device
* @qc: Command to issue
*
- * Due to Hardware errata for IDENTIFY DEVICE command and PACKET
- * command of ATAPI protocol set, the controller cannot clear the BSY bit
- * after receiving the PIO setup FIS. This results in the DMA state machine
- * going into the CMFatalErrorUpdate state and locks up. By restarting the
- * DMA engine, it removes the controller out of lock up state.
+ * Due to Hardware errata for IDENTIFY DEVICE command, the controller cannot
+ * clear the BSY bit after receiving the PIO setup FIS. This results in the dma
+ * state machine goes into the CMFatalErrorUpdate state and locks up. By
+ * restarting the dma engine, it removes the controller out of lock up state.
+ *
+ * Due to H/W errata, the controller is unable to save the PMP
+ * field fetched from command header before sending the H2D FIS.
+ * When the device returns the PMP port field in the D2H FIS, there is
+ * a mismatch and results in command completion failure. The
+ * workaround is to write the pmp value to PxFBS.DEV field before issuing
+ * any command to PMP.
*/
static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
{
@@ -137,9 +198,23 @@ static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
struct ahci_host_priv *hpriv = ap->host->private_data;
struct xgene_ahci_context *ctx = hpriv->plat_data;
int rc = 0;
+ u32 port_fbs;
+ void *port_mmio = ahci_port_base(ap);
+
+ /*
+ * Write the pmp value to PxFBS.DEV
+ * for case of Port Mulitplier.
+ */
+ if (ctx->class[ap->port_no] == ATA_DEV_PMP) {
+ port_fbs = readl(port_mmio + PORT_FBS);
+ port_fbs &= ~PORT_FBS_DEV_MASK;
+ port_fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET;
+ writel(port_fbs, port_mmio + PORT_FBS);
+ }
if (unlikely((ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA) ||
- (ctx->last_cmd[ap->port_no] == ATA_CMD_PACKET)))
+ (ctx->last_cmd[ap->port_no] == ATA_CMD_PACKET) ||
+ (ctx->last_cmd[ap->port_no] == ATA_CMD_SMART)))
xgene_ahci_restart_engine(ap);
rc = ahci_qc_issue(qc);
@@ -365,16 +440,119 @@ static void xgene_ahci_host_stop(struct ata_host *host)
ahci_platform_disable_resources(hpriv);
}
+/**
+ * xgene_ahci_pmp_softreset - Issue the softreset to the drives connected
+ * to Port Multiplier.
+ * @link: link to reset
+ * @class: Return value to indicate class of device
+ * @deadline: deadline jiffies for the operation
+ *
+ * Due to H/W errata, the controller is unable to save the PMP
+ * field fetched from command header before sending the H2D FIS.
+ * When the device returns the PMP port field in the D2H FIS, there is
+ * a mismatch and results in command completion failure. The workaround
+ * is to write the pmp value to PxFBS.DEV field before issuing any command
+ * to PMP.
+ */
+static int xgene_ahci_pmp_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ int pmp = sata_srst_pmp(link);
+ struct ata_port *ap = link->ap;
+ u32 rc;
+ void *port_mmio = ahci_port_base(ap);
+ u32 port_fbs;
+
+ /*
+ * Set PxFBS.DEV field with pmp
+ * value.
+ */
+ port_fbs = readl(port_mmio + PORT_FBS);
+ port_fbs &= ~PORT_FBS_DEV_MASK;
+ port_fbs |= pmp << PORT_FBS_DEV_OFFSET;
+ writel(port_fbs, port_mmio + PORT_FBS);
+
+ rc = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
+
+ return rc;
+}
+
+/**
+ * xgene_ahci_softreset - Issue the softreset to the drive.
+ * @link: link to reset
+ * @class: Return value to indicate class of device
+ * @deadline: deadline jiffies for the operation
+ *
+ * Due to H/W errata, the controller is unable to save the PMP
+ * field fetched from command header before sending the H2D FIS.
+ * When the device returns the PMP port field in the D2H FIS, there is
+ * a mismatch and results in command completion failure. The workaround
+ * is to write the pmp value to PxFBS.DEV field before issuing any command
+ * to PMP. Here is the algorithm to detect PMP :
+ *
+ * 1. Save the PxFBS value
+ * 2. Program PxFBS.DEV with pmp value send by framework. Framework sends
+ * 0xF for both PMP/NON-PMP initially
+ * 3. Issue softreset
+ * 4. If signature class is PMP goto 6
+ * 5. restore the original PxFBS and goto 3
+ * 6. return
+ */
+static int xgene_ahci_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ int pmp = sata_srst_pmp(link);
+ struct ata_port *ap = link->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct xgene_ahci_context *ctx = hpriv->plat_data;
+ void *port_mmio = ahci_port_base(ap);
+ u32 port_fbs;
+ u32 port_fbs_save;
+ u32 retry = 1;
+ u32 rc;
+
+ port_fbs_save = readl(port_mmio + PORT_FBS);
+
+ /*
+ * Set PxFBS.DEV field with pmp
+ * value.
+ */
+ port_fbs = readl(port_mmio + PORT_FBS);
+ port_fbs &= ~PORT_FBS_DEV_MASK;
+ port_fbs |= pmp << PORT_FBS_DEV_OFFSET;
+ writel(port_fbs, port_mmio + PORT_FBS);
+
+softreset_retry:
+ rc = ahci_do_softreset(link, class, pmp,
+ deadline, ahci_check_ready);
+
+ ctx->class[ap->port_no] = *class;
+ if (*class != ATA_DEV_PMP) {
+ /*
+ * Retry for normal drives without
+ * setting PxFBS.DEV field with pmp value.
+ */
+ if (retry--) {
+ writel(port_fbs_save, port_mmio + PORT_FBS);
+ goto softreset_retry;
+ }
+ }
+
+ return rc;
+}
+
static struct ata_port_operations xgene_ahci_ops = {
.inherits = &ahci_ops,
.host_stop = xgene_ahci_host_stop,
.hardreset = xgene_ahci_hardreset,
.read_id = xgene_ahci_read_id,
.qc_issue = xgene_ahci_qc_issue,
+ .softreset = xgene_ahci_softreset,
+ .pmp_softreset = xgene_ahci_pmp_softreset
};
static const struct ata_port_info xgene_ahci_port_info = {
- .flags = AHCI_FLAG_COMMON,
+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &xgene_ahci_ops,
@@ -446,6 +624,10 @@ static int xgene_ahci_mux_select(struct xgene_ahci_context *ctx)
return val & CFG_SATA_ENET_SELECT_MASK ? -1 : 0;
}
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT(DRV_NAME),
+};
+
static int xgene_ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -523,7 +705,8 @@ static int xgene_ahci_probe(struct platform_device *pdev)
skip_clk_phy:
hpriv->flags = AHCI_HFLAG_NO_PMP | AHCI_HFLAG_NO_NCQ;
- rc = ahci_platform_init_host(pdev, hpriv, &xgene_ahci_port_info);
+ rc = ahci_platform_init_host(pdev, hpriv, &xgene_ahci_port_info,
+ &ahci_platform_sht);
if (rc)
goto disable_resources;
@@ -545,7 +728,7 @@ static struct platform_driver xgene_ahci_driver = {
.probe = xgene_ahci_probe,
.remove = ata_platform_remove_one,
.driver = {
- .name = "xgene-ahci",
+ .name = DRV_NAME,
.of_match_table = xgene_ahci_of_match,
},
};
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index 0b03f9056692..d89305d289f6 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -24,6 +24,7 @@
#include <linux/ahci_platform.h>
#include <linux/phy/phy.h>
#include <linux/pm_runtime.h>
+#include <linux/of_platform.h>
#include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
@@ -34,10 +35,6 @@ struct ata_port_operations ahci_platform_ops = {
};
EXPORT_SYMBOL_GPL(ahci_platform_ops);
-static struct scsi_host_template ahci_platform_sht = {
- AHCI_SHT("ahci_platform"),
-};
-
/**
* ahci_platform_enable_phys - Enable PHYs
* @hpriv: host private area to store config values
@@ -54,9 +51,6 @@ static int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
int rc, i;
for (i = 0; i < hpriv->nports; i++) {
- if (!hpriv->phys[i])
- continue;
-
rc = phy_init(hpriv->phys[i]);
if (rc)
goto disable_phys;
@@ -89,9 +83,6 @@ static void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
int i;
for (i = 0; i < hpriv->nports; i++) {
- if (!hpriv->phys[i])
- continue;
-
phy_power_off(hpriv->phys[i]);
phy_exit(hpriv->phys[i]);
}
@@ -144,6 +135,59 @@ void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
/**
+ * ahci_platform_enable_regulators - Enable regulators
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all the regulators found in
+ * hpriv->target_pwrs, if any. If a regulator fails to be enabled, it
+ * disables all the regulators already enabled in reverse order and
+ * returns an error.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv)
+{
+ int rc, i;
+
+ for (i = 0; i < hpriv->nports; i++) {
+ if (!hpriv->target_pwrs[i])
+ continue;
+
+ rc = regulator_enable(hpriv->target_pwrs[i]);
+ if (rc)
+ goto disable_target_pwrs;
+ }
+
+ return 0;
+
+disable_target_pwrs:
+ while (--i >= 0)
+ if (hpriv->target_pwrs[i])
+ regulator_disable(hpriv->target_pwrs[i]);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_regulators);
+
+/**
+ * ahci_platform_disable_regulators - Disable regulators
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all regulators found in hpriv->target_pwrs.
+ */
+void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv)
+{
+ int i;
+
+ for (i = 0; i < hpriv->nports; i++) {
+ if (!hpriv->target_pwrs[i])
+ continue;
+ regulator_disable(hpriv->target_pwrs[i]);
+ }
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
+/**
* ahci_platform_enable_resources - Enable platform resources
* @hpriv: host private area to store config values
*
@@ -163,11 +207,9 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
{
int rc;
- if (hpriv->target_pwr) {
- rc = regulator_enable(hpriv->target_pwr);
- if (rc)
- return rc;
- }
+ rc = ahci_platform_enable_regulators(hpriv);
+ if (rc)
+ return rc;
rc = ahci_platform_enable_clks(hpriv);
if (rc)
@@ -183,8 +225,8 @@ disable_clks:
ahci_platform_disable_clks(hpriv);
disable_regulator:
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
+ ahci_platform_disable_regulators(hpriv);
+
return rc;
}
EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
@@ -205,8 +247,7 @@ void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
ahci_platform_disable_clks(hpriv);
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
+ ahci_platform_disable_regulators(hpriv);
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
@@ -222,6 +263,69 @@ static void ahci_platform_put_resources(struct device *dev, void *res)
for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
clk_put(hpriv->clks[c]);
+ /*
+ * The regulators are tied to child node device and not to the
+ * SATA device itself. So we can't use devm for automatically
+ * releasing them. We have to do it manually here.
+ */
+ for (c = 0; c < hpriv->nports; c++)
+ if (hpriv->target_pwrs && hpriv->target_pwrs[c])
+ regulator_put(hpriv->target_pwrs[c]);
+
+ kfree(hpriv->target_pwrs);
+}
+
+static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port,
+ struct device *dev, struct device_node *node)
+{
+ int rc;
+
+ hpriv->phys[port] = devm_of_phy_get(dev, node, NULL);
+
+ if (!IS_ERR(hpriv->phys[port]))
+ return 0;
+
+ rc = PTR_ERR(hpriv->phys[port]);
+ switch (rc) {
+ case -ENOSYS:
+ /* No PHY support. Check if PHY is required. */
+ if (of_find_property(node, "phys", NULL)) {
+ dev_err(dev,
+ "couldn't get PHY in node %s: ENOSYS\n",
+ node->name);
+ break;
+ }
+ case -ENODEV:
+ /* continue normally */
+ hpriv->phys[port] = NULL;
+ rc = 0;
+ break;
+
+ default:
+ dev_err(dev,
+ "couldn't get PHY in node %s: %d\n",
+ node->name, rc);
+
+ break;
+ }
+
+ return rc;
+}
+
+static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
+ struct device *dev)
+{
+ struct regulator *target_pwr;
+ int rc = 0;
+
+ target_pwr = regulator_get_optional(dev, "target");
+
+ if (!IS_ERR(target_pwr))
+ hpriv->target_pwrs[port] = target_pwr;
+ else
+ rc = PTR_ERR(target_pwr);
+
+ return rc;
}
/**
@@ -246,7 +350,7 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
struct ahci_host_priv *hpriv;
struct clk *clk;
struct device_node *child;
- int i, enabled_ports = 0, rc = -ENOMEM;
+ int i, sz, enabled_ports = 0, rc = -ENOMEM, child_nodes;
u32 mask_port_map = 0;
if (!devres_open_group(dev, NULL, GFP_KERNEL))
@@ -267,14 +371,6 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
goto err_out;
}
- hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
- if (IS_ERR(hpriv->target_pwr)) {
- rc = PTR_ERR(hpriv->target_pwr);
- if (rc == -EPROBE_DEFER)
- goto err_out;
- hpriv->target_pwr = NULL;
- }
-
for (i = 0; i < AHCI_MAX_CLKS; i++) {
/*
* For now we must use clk_get(dev, NULL) for the first clock,
@@ -296,19 +392,33 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
hpriv->clks[i] = clk;
}
- hpriv->nports = of_get_child_count(dev->of_node);
+ hpriv->nports = child_nodes = of_get_child_count(dev->of_node);
- if (hpriv->nports) {
- hpriv->phys = devm_kzalloc(dev,
- hpriv->nports * sizeof(*hpriv->phys),
- GFP_KERNEL);
- if (!hpriv->phys) {
- rc = -ENOMEM;
- goto err_out;
- }
+ /*
+ * If no sub-node was found, we still need to set nports to
+ * one in order to be able to use the
+ * ahci_platform_[en|dis]able_[phys|regulators] functions.
+ */
+ if (!child_nodes)
+ hpriv->nports = 1;
+ sz = hpriv->nports * sizeof(*hpriv->phys);
+ hpriv->phys = devm_kzalloc(dev, sz, GFP_KERNEL);
+ if (!hpriv->phys) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ sz = hpriv->nports * sizeof(*hpriv->target_pwrs);
+ hpriv->target_pwrs = kzalloc(sz, GFP_KERNEL);
+ if (!hpriv->target_pwrs) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+
+ if (child_nodes) {
for_each_child_of_node(dev->of_node, child) {
u32 port;
+ struct platform_device *port_dev __maybe_unused;
if (!of_device_is_available(child))
continue;
@@ -322,17 +432,24 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
dev_warn(dev, "invalid port number %d\n", port);
continue;
}
-
mask_port_map |= BIT(port);
- hpriv->phys[port] = devm_of_phy_get(dev, child, NULL);
- if (IS_ERR(hpriv->phys[port])) {
- rc = PTR_ERR(hpriv->phys[port]);
- dev_err(dev,
- "couldn't get PHY in node %s: %d\n",
- child->name, rc);
- goto err_out;
+#ifdef CONFIG_OF_ADDRESS
+ of_platform_device_create(child, NULL, NULL);
+
+ port_dev = of_find_device_by_node(child);
+
+ if (port_dev) {
+ rc = ahci_platform_get_regulator(hpriv, port,
+ &port_dev->dev);
+ if (rc == -EPROBE_DEFER)
+ goto err_out;
}
+#endif
+
+ rc = ahci_platform_get_phy(hpriv, port, dev, child);
+ if (rc)
+ goto err_out;
enabled_ports++;
}
@@ -349,38 +466,14 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
* If no sub-node was found, keep this for device tree
* compatibility
*/
- struct phy *phy = devm_phy_get(dev, "sata-phy");
- if (!IS_ERR(phy)) {
- hpriv->phys = devm_kzalloc(dev, sizeof(*hpriv->phys),
- GFP_KERNEL);
- if (!hpriv->phys) {
- rc = -ENOMEM;
- goto err_out;
- }
-
- hpriv->phys[0] = phy;
- hpriv->nports = 1;
- } else {
- rc = PTR_ERR(phy);
- switch (rc) {
- case -ENOSYS:
- /* No PHY support. Check if PHY is required. */
- if (of_find_property(dev->of_node, "phys", NULL)) {
- dev_err(dev, "couldn't get sata-phy: ENOSYS\n");
- goto err_out;
- }
- case -ENODEV:
- /* continue normally */
- hpriv->phys = NULL;
- break;
-
- default:
- goto err_out;
+ rc = ahci_platform_get_phy(hpriv, 0, dev, dev->of_node);
+ if (rc)
+ goto err_out;
- }
- }
+ rc = ahci_platform_get_regulator(hpriv, 0, dev);
+ if (rc == -EPROBE_DEFER)
+ goto err_out;
}
-
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
hpriv->got_runtime_pm = true;
@@ -399,6 +492,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
* @pdev: platform device pointer for the host
* @hpriv: ahci-host private data for the host
* @pi_template: template for the ata_port_info to use
+ * @sht: scsi_host_template to use when registering
*
* This function does all the usual steps needed to bring up an
* ahci-platform host, note any necessary resources (ie clks, phys, etc.)
@@ -409,7 +503,8 @@ EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
*/
int ahci_platform_init_host(struct platform_device *pdev,
struct ahci_host_priv *hpriv,
- const struct ata_port_info *pi_template)
+ const struct ata_port_info *pi_template,
+ struct scsi_host_template *sht)
{
struct device *dev = &pdev->dev;
struct ata_port_info pi = *pi_template;
@@ -493,7 +588,7 @@ int ahci_platform_init_host(struct platform_device *pdev,
ahci_init_controller(host);
ahci_print_info(host, "platform");
- return ahci_host_activate(host, irq, &ahci_platform_sht);
+ return ahci_host_activate(host, irq, sht);
}
EXPORT_SYMBOL_GPL(ahci_platform_init_host);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index d1a05f9bb91f..4b0d5e71858e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1752,33 +1752,6 @@ unsigned ata_exec_internal(struct ata_device *dev,
}
/**
- * ata_do_simple_cmd - execute simple internal command
- * @dev: Device to which the command is sent
- * @cmd: Opcode to execute
- *
- * Execute a 'simple' command, that only consists of the opcode
- * 'cmd' itself, without filling any other registers
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * Zero on success, AC_ERR_* mask on failure
- */
-unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd)
-{
- struct ata_taskfile tf;
-
- ata_tf_init(dev, &tf);
-
- tf.command = cmd;
- tf.flags |= ATA_TFLAG_DEVICE;
- tf.protocol = ATA_PROT_NODATA;
-
- return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
-}
-
-/**
* ata_pio_need_iordy - check if iordy needed
* @adev: ATA device
*
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 8d00c2638bed..a9f5aed32d39 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1635,7 +1635,6 @@ unsigned int atapi_eh_request_sense(struct ata_device *dev,
DPRINTK("ATAPI request sense\n");
- /* FIXME: is this needed? */
memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE);
/* initialize sense_buf with the error register,
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 6abd17a85b13..280729325ebd 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1995,8 +1995,8 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
VPRINTK("ENTER\n");
- /* set scsi removeable (RMB) bit per ata bit */
- if (ata_id_removeable(args->id))
+ /* set scsi removable (RMB) bit per ata bit */
+ if (ata_id_removable(args->id))
hdr[1] |= (1 << 7);
if (args->dev->class == ATA_DEV_ZAC) {
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 5f4e0cca56ec..82ebe263d2f1 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -76,7 +76,6 @@ extern unsigned ata_exec_internal_sg(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
int dma_dir, struct scatterlist *sg,
unsigned int n_elem, unsigned long timeout);
-extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd);
extern int ata_wait_ready(struct ata_link *link, unsigned long deadline,
int (*check_ready)(struct ata_link *link));
extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 48ae4b434474..f9ca72e937ee 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -276,10 +276,8 @@ static int cs5530_init_chip(void)
pci_dev_put(cs5530_0);
return 0;
fail_put:
- if (master_0)
- pci_dev_put(master_0);
- if (cs5530_0)
- pci_dev_put(cs5530_0);
+ pci_dev_put(master_0);
+ pci_dev_put(cs5530_0);
return -ENODEV;
}
diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c
index dcc408abe171..b6b7af894d9d 100644
--- a/drivers/ata/pata_of_platform.c
+++ b/drivers/ata/pata_of_platform.c
@@ -16,6 +16,12 @@
#include <linux/ata_platform.h>
#include <linux/libata.h>
+#define DRV_NAME "pata_of_platform"
+
+static struct scsi_host_template pata_platform_sht = {
+ ATA_PIO_SHT(DRV_NAME),
+};
+
static int pata_of_platform_probe(struct platform_device *ofdev)
{
int ret;
@@ -63,7 +69,7 @@ static int pata_of_platform_probe(struct platform_device *ofdev)
pio_mask |= (1 << pio_mode) - 1;
return __pata_platform_probe(&ofdev->dev, &io_res, &ctl_res, irq_res,
- reg_shift, pio_mask);
+ reg_shift, pio_mask, &pata_platform_sht);
}
static struct of_device_id pata_of_platform_match[] = {
@@ -74,7 +80,7 @@ MODULE_DEVICE_TABLE(of, pata_of_platform_match);
static struct platform_driver pata_of_platform_driver = {
.driver = {
- .name = "pata_of_platform",
+ .name = DRV_NAME,
.of_match_table = pata_of_platform_match,
},
.probe = pata_of_platform_probe,
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 4d06a5cda987..dca8251b1aea 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -28,6 +28,7 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/ktime.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
@@ -605,7 +606,7 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
u32 scr;
long start_count, end_count;
- struct timeval start_time, end_time;
+ ktime_t start_time, end_time;
long pll_clock, usec_elapsed;
/* Start the test mode */
@@ -616,14 +617,14 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
/* Read current counter value */
start_count = pdc_read_counter(host);
- do_gettimeofday(&start_time);
+ start_time = ktime_get();
/* Let the counter run for 100 ms. */
mdelay(100);
/* Read the counter values again */
end_count = pdc_read_counter(host);
- do_gettimeofday(&end_time);
+ end_time = ktime_get();
/* Stop the test mode */
scr = ioread32(mmio_base + PDC_SYS_CTL);
@@ -632,8 +633,7 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
ioread32(mmio_base + PDC_SYS_CTL); /* flush */
/* calculate the input clock in Hz */
- usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 +
- (end_time.tv_usec - start_time.tv_usec);
+ usec_elapsed = (long) ktime_us_delta(end_time, start_time);
pll_clock = ((start_count - end_count) & 0x3fffffff) / 100 *
(100000000 / usec_elapsed);
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 1eedfe46d7c8..c503ded87bb8 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -78,6 +78,7 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr,
* @irq_res: Resource representing IRQ and its flags
* @ioport_shift: I/O port shift
* @__pio_mask: PIO mask
+ * @sht: scsi_host_template to use when registering
*
* Register a platform bus IDE interface. Such interfaces are PIO and we
* assume do not support IRQ sharing.
@@ -99,7 +100,8 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr,
*/
int __pata_platform_probe(struct device *dev, struct resource *io_res,
struct resource *ctl_res, struct resource *irq_res,
- unsigned int ioport_shift, int __pio_mask)
+ unsigned int ioport_shift, int __pio_mask,
+ struct scsi_host_template *sht)
{
struct ata_host *host;
struct ata_port *ap;
@@ -170,7 +172,7 @@ int __pata_platform_probe(struct device *dev, struct resource *io_res,
/* activate */
return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL,
- irq_flags, &pata_platform_sht);
+ irq_flags, sht);
}
EXPORT_SYMBOL_GPL(__pata_platform_probe);
@@ -216,7 +218,7 @@ static int pata_platform_probe(struct platform_device *pdev)
return __pata_platform_probe(&pdev->dev, io_res, ctl_res, irq_res,
pp_info ? pp_info->ioport_shift : 0,
- pio_mask);
+ pio_mask, &pata_platform_sht);
}
static struct platform_driver pata_platform_driver = {
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 8e8248179d20..fdb0f2879ea7 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -48,6 +48,18 @@
#define DRV_NAME "sata-dwc"
#define DRV_VERSION "1.3"
+#ifndef out_le32
+#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (void __iomem *)(a))
+#endif
+
+#ifndef in_le32
+#define in_le32(a) __le32_to_cpu(__raw_readl((void __iomem *)(a)))
+#endif
+
+#ifndef NO_IRQ
+#define NO_IRQ 0
+#endif
+
/* SATA DMA driver Globals */
#define DMA_NUM_CHANS 1
#define DMA_NUM_CHAN_REGS 8
@@ -273,7 +285,7 @@ struct sata_dwc_device {
struct device *dev; /* generic device struct */
struct ata_probe_ent *pe; /* ptr to probe-ent */
struct ata_host *host;
- u8 *reg_base;
+ u8 __iomem *reg_base;
struct sata_dwc_regs *sata_dwc_regs; /* DW Synopsys SATA specific */
int irq_dma;
};
@@ -323,7 +335,9 @@ struct sata_dwc_host_priv {
struct device *dwc_dev;
int dma_channel;
};
-struct sata_dwc_host_priv host_pvt;
+
+static struct sata_dwc_host_priv host_pvt;
+
/*
* Prototypes
*/
@@ -580,9 +594,9 @@ static int map_sg_to_lli(struct scatterlist *sg, int num_elems,
sms_val = 0;
dms_val = 1 + host_pvt.dma_channel;
- dev_dbg(host_pvt.dwc_dev, "%s: sg=%p nelem=%d lli=%p dma_lli=0x%08x"
- " dmadr=0x%08x\n", __func__, sg, num_elems, lli, (u32)dma_lli,
- (u32)dmadr_addr);
+ dev_dbg(host_pvt.dwc_dev,
+ "%s: sg=%p nelem=%d lli=%p dma_lli=0x%pad dmadr=0x%p\n",
+ __func__, sg, num_elems, lli, &dma_lli, dmadr_addr);
bl = get_burst_length_encode(AHB_DMA_BRST_DFLT);
@@ -773,7 +787,7 @@ static void dma_dwc_exit(struct sata_dwc_device *hsdev)
{
dev_dbg(host_pvt.dwc_dev, "%s:\n", __func__);
if (host_pvt.sata_dma_regs) {
- iounmap(host_pvt.sata_dma_regs);
+ iounmap((void __iomem *)host_pvt.sata_dma_regs);
host_pvt.sata_dma_regs = NULL;
}
@@ -818,7 +832,7 @@ static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
return -EINVAL;
}
- *val = in_le32((void *)link->ap->ioaddr.scr_addr + (scr * 4));
+ *val = in_le32(link->ap->ioaddr.scr_addr + (scr * 4));
dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
__func__, link->ap->print_id, scr, *val);
@@ -834,21 +848,19 @@ static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val)
__func__, scr);
return -EINVAL;
}
- out_le32((void *)link->ap->ioaddr.scr_addr + (scr * 4), val);
+ out_le32(link->ap->ioaddr.scr_addr + (scr * 4), val);
return 0;
}
static u32 core_scr_read(unsigned int scr)
{
- return in_le32((void __iomem *)(host_pvt.scr_addr_sstatus) +\
- (scr * 4));
+ return in_le32(host_pvt.scr_addr_sstatus + (scr * 4));
}
static void core_scr_write(unsigned int scr, u32 val)
{
- out_le32((void __iomem *)(host_pvt.scr_addr_sstatus) + (scr * 4),
- val);
+ out_le32(host_pvt.scr_addr_sstatus + (scr * 4), val);
}
static void clear_serror(void)
@@ -856,7 +868,6 @@ static void clear_serror(void)
u32 val;
val = core_scr_read(SCR_ERROR);
core_scr_write(SCR_ERROR, val);
-
}
static void clear_interrupt_bit(struct sata_dwc_device *hsdev, u32 bit)
@@ -1256,24 +1267,24 @@ static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev)
static void sata_dwc_setup_port(struct ata_ioports *port, unsigned long base)
{
- port->cmd_addr = (void *)base + 0x00;
- port->data_addr = (void *)base + 0x00;
+ port->cmd_addr = (void __iomem *)base + 0x00;
+ port->data_addr = (void __iomem *)base + 0x00;
- port->error_addr = (void *)base + 0x04;
- port->feature_addr = (void *)base + 0x04;
+ port->error_addr = (void __iomem *)base + 0x04;
+ port->feature_addr = (void __iomem *)base + 0x04;
- port->nsect_addr = (void *)base + 0x08;
+ port->nsect_addr = (void __iomem *)base + 0x08;
- port->lbal_addr = (void *)base + 0x0c;
- port->lbam_addr = (void *)base + 0x10;
- port->lbah_addr = (void *)base + 0x14;
+ port->lbal_addr = (void __iomem *)base + 0x0c;
+ port->lbam_addr = (void __iomem *)base + 0x10;
+ port->lbah_addr = (void __iomem *)base + 0x14;
- port->device_addr = (void *)base + 0x18;
- port->command_addr = (void *)base + 0x1c;
- port->status_addr = (void *)base + 0x1c;
+ port->device_addr = (void __iomem *)base + 0x18;
+ port->command_addr = (void __iomem *)base + 0x1c;
+ port->status_addr = (void __iomem *)base + 0x1c;
- port->altstatus_addr = (void *)base + 0x20;
- port->ctl_addr = (void *)base + 0x20;
+ port->altstatus_addr = (void __iomem *)base + 0x20;
+ port->ctl_addr = (void __iomem *)base + 0x20;
}
/*
@@ -1314,7 +1325,7 @@ static int sata_dwc_port_start(struct ata_port *ap)
for (i = 0; i < SATA_DWC_QCMD_MAX; i++)
hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT;
- ap->bmdma_prd = 0; /* set these so libata doesn't use them */
+ ap->bmdma_prd = NULL; /* set these so libata doesn't use them */
ap->bmdma_prd_dma = 0;
/*
@@ -1511,8 +1522,8 @@ static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag)
dma_chan = dma_dwc_xfer_setup(sg, qc->n_elem, hsdevp->llit[tag],
hsdevp->llit_dma[tag],
- (void *__iomem)(&hsdev->sata_dwc_regs->\
- dmadr), qc->dma_dir);
+ (void __iomem *)&hsdev->sata_dwc_regs->dmadr,
+ qc->dma_dir);
if (dma_chan < 0) {
dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns err %d\n",
__func__, dma_chan);
@@ -1585,8 +1596,8 @@ static void sata_dwc_error_handler(struct ata_port *ap)
ata_sff_error_handler(ap);
}
-int sata_dwc_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
+static int sata_dwc_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
{
struct sata_dwc_device *hsdev = HSDEV_FROM_AP(link->ap);
int ret;
@@ -1618,7 +1629,7 @@ static struct scsi_host_template sata_dwc_sht = {
* max of 1. This will get fixed in in a future release.
*/
.sg_tablesize = LIBATA_MAX_PRD,
- .can_queue = ATA_DEF_QUEUE, /* ATA_MAX_QUEUE */
+ /* .can_queue = ATA_MAX_QUEUE, */
.dma_boundary = ATA_DMA_BOUNDARY,
};
@@ -1655,7 +1666,7 @@ static int sata_dwc_probe(struct platform_device *ofdev)
struct sata_dwc_device *hsdev;
u32 idr, versionr;
char *ver = (char *)&versionr;
- u8 *base = NULL;
+ u8 __iomem *base;
int err = 0;
int irq;
struct ata_host *host;
@@ -1665,12 +1676,12 @@ static int sata_dwc_probe(struct platform_device *ofdev)
u32 dma_chan;
/* Allocate DWC SATA device */
- hsdev = kzalloc(sizeof(*hsdev), GFP_KERNEL);
- if (hsdev == NULL) {
- dev_err(&ofdev->dev, "kmalloc failed for hsdev\n");
- err = -ENOMEM;
- goto error;
- }
+ host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS);
+ hsdev = devm_kzalloc(&ofdev->dev, sizeof(*hsdev), GFP_KERNEL);
+ if (!host || !hsdev)
+ return -ENOMEM;
+
+ host->private_data = hsdev;
if (of_property_read_u32(np, "dma-channel", &dma_chan)) {
dev_warn(&ofdev->dev, "no dma-channel property set."
@@ -1680,12 +1691,11 @@ static int sata_dwc_probe(struct platform_device *ofdev)
host_pvt.dma_channel = dma_chan;
/* Ioremap SATA registers */
- base = of_iomap(ofdev->dev.of_node, 0);
+ base = of_iomap(np, 0);
if (!base) {
dev_err(&ofdev->dev, "ioremap failed for SATA register"
" address\n");
- err = -ENODEV;
- goto error_kmalloc;
+ return -ENODEV;
}
hsdev->reg_base = base;
dev_dbg(&ofdev->dev, "ioremap done for SATA register address\n");
@@ -1693,16 +1703,6 @@ static int sata_dwc_probe(struct platform_device *ofdev)
/* Synopsys DWC SATA specific Registers */
hsdev->sata_dwc_regs = (void *__iomem)(base + SATA_DWC_REG_OFFSET);
- /* Allocate and fill host */
- host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS);
- if (!host) {
- dev_err(&ofdev->dev, "ata_host_alloc_pinfo failed\n");
- err = -ENOMEM;
- goto error_iomap;
- }
-
- host->private_data = hsdev;
-
/* Setup port */
host->ports[0]->ioaddr.cmd_addr = base;
host->ports[0]->ioaddr.scr_addr = base + SATA_DWC_SCR_OFFSET;
@@ -1716,7 +1716,7 @@ static int sata_dwc_probe(struct platform_device *ofdev)
idr, ver[0], ver[1], ver[2]);
/* Get SATA DMA interrupt number */
- irq = irq_of_parse_and_map(ofdev->dev.of_node, 1);
+ irq = irq_of_parse_and_map(np, 1);
if (irq == NO_IRQ) {
dev_err(&ofdev->dev, "no SATA DMA irq\n");
err = -ENODEV;
@@ -1724,7 +1724,7 @@ static int sata_dwc_probe(struct platform_device *ofdev)
}
/* Get physical SATA DMA register base address */
- host_pvt.sata_dma_regs = of_iomap(ofdev->dev.of_node, 1);
+ host_pvt.sata_dma_regs = (void *)of_iomap(np, 1);
if (!(host_pvt.sata_dma_regs)) {
dev_err(&ofdev->dev, "ioremap failed for AHBDMA register"
" address\n");
@@ -1744,7 +1744,7 @@ static int sata_dwc_probe(struct platform_device *ofdev)
sata_dwc_enable_interrupts(hsdev);
/* Get SATA interrupt number */
- irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
+ irq = irq_of_parse_and_map(np, 0);
if (irq == NO_IRQ) {
dev_err(&ofdev->dev, "no SATA DMA irq\n");
err = -ENODEV;
@@ -1770,9 +1770,6 @@ error_dma_iomap:
iounmap((void __iomem *)host_pvt.sata_dma_regs);
error_iomap:
iounmap(base);
-error_kmalloc:
- kfree(hsdev);
-error:
return err;
}
@@ -1783,15 +1780,12 @@ static int sata_dwc_remove(struct platform_device *ofdev)
struct sata_dwc_device *hsdev = host->private_data;
ata_host_detach(host);
- dev_set_drvdata(dev, NULL);
/* Free SATA DMA resources */
dma_dwc_exit(hsdev);
iounmap((void __iomem *)host_pvt.sata_dma_regs);
iounmap(hsdev->reg_base);
- kfree(hsdev);
- kfree(host);
dev_dbg(&ofdev->dev, "done\n");
return 0;
}
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index f9a0e34eb111..f8c33e3772b8 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -4185,8 +4185,7 @@ err:
clk_disable_unprepare(hpriv->port_clks[port]);
clk_put(hpriv->port_clks[port]);
}
- if (hpriv->port_phys[port])
- phy_power_off(hpriv->port_phys[port]);
+ phy_power_off(hpriv->port_phys[port]);
}
return rc;
@@ -4216,8 +4215,7 @@ static int mv_platform_remove(struct platform_device *pdev)
clk_disable_unprepare(hpriv->port_clks[port]);
clk_put(hpriv->port_clks[port]);
}
- if (hpriv->port_phys[port])
- phy_power_off(hpriv->port_phys[port]);
+ phy_power_off(hpriv->port_phys[port]);
}
return 0;
}
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index cb0d2e644af5..d49a5193b7de 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -2,8 +2,8 @@
* Renesas R-Car SATA driver
*
* Author: Vladimir Barinov <source@cogentembedded.com>
- * Copyright (C) 2013 Cogent Embedded, Inc.
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-2015 Cogent Embedded, Inc.
+ * Copyright (C) 2013-2015 Renesas Solutions Corp.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -992,9 +992,30 @@ static int sata_rcar_resume(struct device *dev)
return 0;
}
+static int sata_rcar_restore(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct sata_rcar_priv *priv = host->private_data;
+
+ clk_prepare_enable(priv->clk);
+
+ sata_rcar_setup_port(host);
+
+ /* initialize host controller */
+ sata_rcar_init_controller(host);
+
+ ata_host_resume(host);
+
+ return 0;
+}
+
static const struct dev_pm_ops sata_rcar_pm_ops = {
.suspend = sata_rcar_suspend,
.resume = sata_rcar_resume,
+ .freeze = sata_rcar_suspend,
+ .thaw = sata_rcar_resume,
+ .poweroff = sata_rcar_suspend,
+ .restore = sata_rcar_restore,
};
#endif
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
index 642d6ae4030c..a270f25ee7c7 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -21,16 +21,20 @@ struct device;
struct ata_port_info;
struct ahci_host_priv;
struct platform_device;
+struct scsi_host_template;
int ahci_platform_enable_clks(struct ahci_host_priv *hpriv);
void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
+int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv);
+void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv);
int ahci_platform_enable_resources(struct ahci_host_priv *hpriv);
void ahci_platform_disable_resources(struct ahci_host_priv *hpriv);
struct ahci_host_priv *ahci_platform_get_resources(
struct platform_device *pdev);
int ahci_platform_init_host(struct platform_device *pdev,
struct ahci_host_priv *hpriv,
- const struct ata_port_info *pi_template);
+ const struct ata_port_info *pi_template,
+ struct scsi_host_template *sht);
int ahci_platform_suspend_host(struct device *dev);
int ahci_platform_resume_host(struct device *dev);
diff --git a/include/linux/ata.h b/include/linux/ata.h
index f2f4d8da97c0..1648026e06b4 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -503,7 +503,7 @@ struct ata_bmdma_prd {
#define ata_id_has_dma(id) ((id)[ATA_ID_CAPABILITY] & (1 << 8))
#define ata_id_has_ncq(id) ((id)[ATA_ID_SATA_CAPABILITY] & (1 << 8))
#define ata_id_queue_depth(id) (((id)[ATA_ID_QUEUE_DEPTH] & 0x1f) + 1)
-#define ata_id_removeable(id) ((id)[ATA_ID_CONFIG] & (1 << 7))
+#define ata_id_removable(id) ((id)[ATA_ID_CONFIG] & (1 << 7))
#define ata_id_has_atapi_AN(id) \
((((id)[ATA_ID_SATA_CAPABILITY] != 0x0000) && \
((id)[ATA_ID_SATA_CAPABILITY] != 0xffff)) && \
diff --git a/include/linux/ata_platform.h b/include/linux/ata_platform.h
index 5c618a084225..619d9e78e644 100644
--- a/include/linux/ata_platform.h
+++ b/include/linux/ata_platform.h
@@ -10,12 +10,15 @@ struct pata_platform_info {
unsigned int ioport_shift;
};
+struct scsi_host_template;
+
extern int __pata_platform_probe(struct device *dev,
struct resource *io_res,
struct resource *ctl_res,
struct resource *irq_res,
unsigned int ioport_shift,
- int __pio_mask);
+ int __pio_mask,
+ struct scsi_host_template *sht);
/*
* Marvell SATA private data
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 91f705de2c0b..61df823ac86a 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1340,6 +1340,12 @@ extern const struct ata_port_operations ata_base_port_ops;
extern const struct ata_port_operations sata_port_ops;
extern struct device_attribute *ata_common_sdev_attrs[];
+/*
+ * All sht initializers (BASE, PIO, BMDMA, NCQ) must be instantiated
+ * by the edge drivers. Because the 'module' field of sht must be the
+ * edge driver's module reference, otherwise the driver can be unloaded
+ * even if the scsi_device is being accessed.
+ */
#define ATA_BASE_SHT(drv_name) \
.module = THIS_MODULE, \
.name = drv_name, \