diff options
-rw-r--r-- | drivers/media/video/cx88/Kconfig | 28 | ||||
-rw-r--r-- | drivers/media/video/em28xx/em28xx-video.c | 3 | ||||
-rw-r--r-- | drivers/net/tg3.c | 52 | ||||
-rw-r--r-- | drivers/net/tg3.h | 1 | ||||
-rw-r--r-- | include/linux/pci_ids.h | 1 | ||||
-rw-r--r-- | include/net/ax25.h | 9 | ||||
-rw-r--r-- | kernel/fork.c | 4 | ||||
-rw-r--r-- | net/ax25/sysctl_net_ax25.c | 2 |
8 files changed, 72 insertions, 28 deletions
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig index e99dfbbf3e95..87d79df05336 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/video/cx88/Kconfig @@ -15,20 +15,6 @@ config VIDEO_CX88 To compile this driver as a module, choose M here: the module will be called cx8800 -config VIDEO_CX88_DVB - tristate "DVB/ATSC Support for cx2388x based TV cards" - depends on VIDEO_CX88 && DVB_CORE - select VIDEO_BUF_DVB - ---help--- - This adds support for DVB/ATSC cards based on the - Connexant 2388x chip. - - To compile this driver as a module, choose M here: the - module will be called cx88-dvb. - - You must also select one or more DVB/ATSC demodulators. - If you are unsure which you need, choose all of them. - config VIDEO_CX88_ALSA tristate "ALSA DMA audio support" depends on VIDEO_CX88 && SND && EXPERIMENTAL @@ -44,6 +30,20 @@ config VIDEO_CX88_ALSA To compile this driver as a module, choose M here: the module will be called cx88-alsa. +config VIDEO_CX88_DVB + tristate "DVB/ATSC Support for cx2388x based TV cards" + depends on VIDEO_CX88 && DVB_CORE + select VIDEO_BUF_DVB + ---help--- + This adds support for DVB/ATSC cards based on the + Connexant 2388x chip. + + To compile this driver as a module, choose M here: the + module will be called cx88-dvb. + + You must also select one or more DVB/ATSC demodulators. + If you are unsure which you need, choose all of them. + config VIDEO_CX88_DVB_ALL_FRONTENDS bool "Build all supported frontends for cx2388x based TV cards" default y diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 94a14a2bb6d6..5b267808a9d4 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -367,6 +367,9 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) em28xx_capture_start(dev, 1); em28xx_resolution_set(dev); + /* device needs to be initialized before isoc transfer */ + video_mux(dev, 0); + /* start the transfer */ errCode = em28xx_init_isoc(dev); if (errCode) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index b8f1524da557..caf4102b54ce 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -9552,12 +9552,36 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) } } - /* Find msi capability. */ + /* The EPB bridge inside 5714, 5715, and 5780 cannot support + * DMA addresses > 40-bit. This bridge may have other additional + * 57xx devices behind it in some 4-port NIC designs for example. + * Any tg3 device found behind the bridge will also need the 40-bit + * DMA workaround. + */ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) { tp->tg3_flags2 |= TG3_FLG2_5780_CLASS; + tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG; tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI); } + else { + struct pci_dev *bridge = NULL; + + do { + bridge = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, + PCI_DEVICE_ID_SERVERWORKS_EPB, + bridge); + if (bridge && bridge->subordinate && + (bridge->subordinate->number <= + tp->pdev->bus->number) && + (bridge->subordinate->subordinate >= + tp->pdev->bus->number)) { + tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG; + pci_dev_put(bridge); + break; + } + } while (bridge); + } /* Initialize misc host control in PCI block. */ tp->misc_host_ctrl |= (misc_ctrl_reg & @@ -10303,7 +10327,14 @@ static int __devinit tg3_test_dma(struct tg3 *tp) GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) { u32 ccval = (tr32(TG3PCI_CLOCK_CTRL) & 0x1f); - if (ccval == 0x6 || ccval == 0x7) + /* If the 5704 is behind the EPB bridge, we can + * do the less restrictive ONE_DMA workaround for + * better performance. + */ + if ((tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) && + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) + tp->dma_rwctrl |= 0x8000; + else if (ccval == 0x6 || ccval == 0x7) tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA; /* Set bit 23 to enable PCIX hw bug fix */ @@ -10759,19 +10790,20 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, goto err_out_iounmap; } - /* 5714, 5715 and 5780 cannot support DMA addresses > 40-bit. + /* The EPB bridge inside 5714, 5715, and 5780 and any + * device behind the EPB cannot support DMA addresses > 40-bit. * On 64-bit systems with IOMMU, use 40-bit dma_mask. * On 64-bit systems without IOMMU, use 64-bit dma_mask and * do DMA address check in tg3_start_xmit(). */ - if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) { + if (tp->tg3_flags2 & TG3_FLG2_IS_5788) + persist_dma_mask = dma_mask = DMA_32BIT_MASK; + else if (tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) { persist_dma_mask = dma_mask = DMA_40BIT_MASK; #ifdef CONFIG_HIGHMEM dma_mask = DMA_64BIT_MASK; #endif - } else if (tp->tg3_flags2 & TG3_FLG2_IS_5788) - persist_dma_mask = dma_mask = DMA_32BIT_MASK; - else + } else persist_dma_mask = dma_mask = DMA_64BIT_MASK; /* Configure DMA attributes. */ @@ -10908,8 +10940,10 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, (tp->tg3_flags & TG3_FLAG_SPLIT_MODE) != 0, (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0, (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0); - printk(KERN_INFO "%s: dma_rwctrl[%08x]\n", - dev->name, tp->dma_rwctrl); + printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n", + dev->name, tp->dma_rwctrl, + (pdev->dma_mask == DMA_32BIT_MASK) ? 32 : + (((u64) pdev->dma_mask == DMA_40BIT_MASK) ? 40 : 64)); return 0; diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 7f4b7f6ac40d..7e3b613afb29 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2163,6 +2163,7 @@ struct tg3 { #define TG3_FLAG_10_100_ONLY 0x01000000 #define TG3_FLAG_PAUSE_AUTONEG 0x02000000 #define TG3_FLAG_IN_RESET_TASK 0x04000000 +#define TG3_FLAG_40BIT_DMA_BUG 0x08000000 #define TG3_FLAG_BROKEN_CHECKSUMS 0x10000000 #define TG3_FLAG_GOT_SERDES_FLOWCTL 0x20000000 #define TG3_FLAG_SPLIT_MODE 0x40000000 diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 1709b5009d2e..751eea58bde8 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1365,6 +1365,7 @@ #define PCI_DEVICE_ID_SERVERWORKS_HE 0x0008 #define PCI_DEVICE_ID_SERVERWORKS_LE 0x0009 #define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017 +#define PCI_DEVICE_ID_SERVERWORKS_EPB 0x0103 #define PCI_DEVICE_ID_SERVERWORKS_OSB4 0x0200 #define PCI_DEVICE_ID_SERVERWORKS_CSB5 0x0201 #define PCI_DEVICE_ID_SERVERWORKS_CSB6 0x0203 diff --git a/include/net/ax25.h b/include/net/ax25.h index 2250a18b0cbb..d052b221dbcd 100644 --- a/include/net/ax25.h +++ b/include/net/ax25.h @@ -110,8 +110,15 @@ enum { enum { AX25_PROTO_STD_SIMPLEX, AX25_PROTO_STD_DUPLEX, +#ifdef CONFIG_AX25_DAMA_SLAVE AX25_PROTO_DAMA_SLAVE, - AX25_PROTO_DAMA_MASTER +#ifdef CONFIG_AX25_DAMA_MASTER + AX25_PROTO_DAMA_MASTER, +#define AX25_PROTO_MAX AX25_PROTO_DAMA_MASTER +#endif +#endif + __AX25_PROTO_MAX, + AX25_PROTO_MAX = __AX25_PROTO_MAX -1 }; enum { diff --git a/kernel/fork.c b/kernel/fork.c index 46060cb24af0..b373322ca497 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1478,9 +1478,7 @@ static int unshare_vm(unsigned long unshare_flags, struct mm_struct **new_mmp) if ((unshare_flags & CLONE_VM) && (mm && atomic_read(&mm->mm_users) > 1)) { - *new_mmp = dup_mm(current); - if (!*new_mmp) - return -ENOMEM; + return -EINVAL; } return 0; diff --git a/net/ax25/sysctl_net_ax25.c b/net/ax25/sysctl_net_ax25.c index f67711f2ee96..894a22558d9d 100644 --- a/net/ax25/sysctl_net_ax25.c +++ b/net/ax25/sysctl_net_ax25.c @@ -24,7 +24,7 @@ static int min_t3[1], max_t3[] = {3600 * HZ}; static int min_idle[1], max_idle[] = {65535 * HZ}; static int min_n2[] = {1}, max_n2[] = {31}; static int min_paclen[] = {1}, max_paclen[] = {512}; -static int min_proto[1], max_proto[] = {3}; +static int min_proto[1], max_proto[] = { AX25_PROTO_MAX }; static int min_ds_timeout[1], max_ds_timeout[] = {65535 * HZ}; static struct ctl_table_header *ax25_table_header; |