diff options
-rw-r--r-- | Documentation/RCU/torture.txt | 15 | ||||
-rw-r--r-- | Documentation/kernel-parameters.txt | 88 | ||||
-rw-r--r-- | MAINTAINERS | 14 | ||||
-rw-r--r-- | include/linux/rculist.h | 40 | ||||
-rw-r--r-- | include/linux/rcupdate.h | 18 | ||||
-rw-r--r-- | include/linux/rcutree.h | 7 | ||||
-rw-r--r-- | include/linux/srcu.h | 48 | ||||
-rw-r--r-- | include/trace/events/rcu.h | 2 | ||||
-rw-r--r-- | init/Kconfig | 50 | ||||
-rw-r--r-- | kernel/rcutorture.c | 257 | ||||
-rw-r--r-- | kernel/rcutree.c | 331 | ||||
-rw-r--r-- | kernel/rcutree.h | 22 | ||||
-rw-r--r-- | kernel/rcutree_plugin.h | 124 | ||||
-rw-r--r-- | kernel/rcutree_trace.c | 4 | ||||
-rw-r--r-- | kernel/srcu.c | 548 | ||||
-rw-r--r-- | kernel/timer.c | 8 | ||||
-rw-r--r-- | lib/list_debug.c | 22 |
17 files changed, 1313 insertions, 285 deletions
diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt index 375d3fb71437..4ddf3913fd8c 100644 --- a/Documentation/RCU/torture.txt +++ b/Documentation/RCU/torture.txt @@ -47,6 +47,16 @@ irqreader Says to invoke RCU readers from irq level. This is currently permit this. (Or, more accurately, variants of RCU that do -not- permit this know to ignore this variable.) +n_barrier_cbs If this is nonzero, RCU barrier testing will be conducted, + in which case n_barrier_cbs specifies the number of + RCU callbacks (and corresponding kthreads) to use for + this testing. The value cannot be negative. If you + specify this to be non-zero when torture_type indicates a + synchronous RCU implementation (one for which a member of + the synchronize_rcu() rather than the call_rcu() family is + used -- see the documentation for torture_type below), an + error will be reported and no testing will be carried out. + nfakewriters This is the number of RCU fake writer threads to run. Fake writer threads repeatedly use the synchronous "wait for current readers" function of the interface selected by @@ -188,7 +198,7 @@ OUTPUT The statistics output is as follows: rcu-torture:--- Start of test: nreaders=16 nfakewriters=4 stat_interval=30 verbose=0 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 - rcu-torture: rtc: (null) ver: 155441 tfle: 0 rta: 155441 rtaf: 8884 rtf: 155440 rtmbe: 0 rtbke: 0 rtbre: 0 rtbf: 0 rtb: 0 nt: 3055767 + rcu-torture: rtc: (null) ver: 155441 tfle: 0 rta: 155441 rtaf: 8884 rtf: 155440 rtmbe: 0 rtbe: 0 rtbke: 0 rtbre: 0 rtbf: 0 rtb: 0 nt: 3055767 rcu-torture: Reader Pipe: 727860534 34213 0 0 0 0 0 0 0 0 0 rcu-torture: Reader Batch: 727877838 17003 0 0 0 0 0 0 0 0 0 rcu-torture: Free-Block Circulation: 155440 155440 155440 155440 155440 155440 155440 155440 155440 155440 0 @@ -230,6 +240,9 @@ o "rtmbe": A non-zero value indicates that rcutorture believes that rcu_assign_pointer() and rcu_dereference() are not working correctly. This value should be zero. +o "rtbe": A non-zero value indicates that one of the rcu_barrier() + family of functions is not working correctly. + o "rtbke": rcutorture was unable to create the real-time kthreads used to force RCU priority inversion. This value should be zero. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c1601e5a8b71..ab84a01c8d68 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2330,18 +2330,100 @@ bytes respectively. Such letter suffixes can also be entirely omitted. ramdisk_size= [RAM] Sizes of RAM disks in kilobytes See Documentation/blockdev/ramdisk.txt. - rcupdate.blimit= [KNL,BOOT] + rcutree.blimit= [KNL,BOOT] Set maximum number of finished RCU callbacks to process in one batch. - rcupdate.qhimark= [KNL,BOOT] + rcutree.qhimark= [KNL,BOOT] Set threshold of queued RCU callbacks over which batch limiting is disabled. - rcupdate.qlowmark= [KNL,BOOT] + rcutree.qlowmark= [KNL,BOOT] Set threshold of queued RCU callbacks below which batch limiting is re-enabled. + rcutree.rcu_cpu_stall_suppress= [KNL,BOOT] + Suppress RCU CPU stall warning messages. + + rcutree.rcu_cpu_stall_timeout= [KNL,BOOT] + Set timeout for RCU CPU stall warning messages. + + rcutorture.fqs_duration= [KNL,BOOT] + Set duration of force_quiescent_state bursts. + + rcutorture.fqs_holdoff= [KNL,BOOT] + Set holdoff time within force_quiescent_state bursts. + + rcutorture.fqs_stutter= [KNL,BOOT] + Set wait time between force_quiescent_state bursts. + + rcutorture.irqreader= [KNL,BOOT] + Test RCU readers from irq handlers. + + rcutorture.n_barrier_cbs= [KNL,BOOT] + Set callbacks/threads for rcu_barrier() testing. + + rcutorture.nfakewriters= [KNL,BOOT] + Set number of concurrent RCU writers. These just + stress RCU, they don't participate in the actual + test, hence the "fake". + + rcutorture.nreaders= [KNL,BOOT] + Set number of RCU readers. + + rcutorture.onoff_holdoff= [KNL,BOOT] + Set time (s) after boot for CPU-hotplug testing. + + rcutorture.onoff_interval= [KNL,BOOT] + Set time (s) between CPU-hotplug operations, or + zero to disable CPU-hotplug testing. + + rcutorture.shuffle_interval= [KNL,BOOT] + Set task-shuffle interval (s). Shuffling tasks + allows some CPUs to go into dyntick-idle mode + during the rcutorture test. + + rcutorture.shutdown_secs= [KNL,BOOT] + Set time (s) after boot system shutdown. This + is useful for hands-off automated testing. + + rcutorture.stall_cpu= [KNL,BOOT] + Duration of CPU stall (s) to test RCU CPU stall + warnings, zero to disable. + + rcutorture.stall_cpu_holdoff= [KNL,BOOT] + Time to wait (s) after boot before inducing stall. + + rcutorture.stat_interval= [KNL,BOOT] + Time (s) between statistics printk()s. + + rcutorture.stutter= [KNL,BOOT] + Time (s) to stutter testing, for example, specifying + five seconds causes the test to run for five seconds, + wait for five seconds, and so on. This tests RCU's + ability to transition abruptly to and from idle. + + rcutorture.test_boost= [KNL,BOOT] + Test RCU priority boosting? 0=no, 1=maybe, 2=yes. + "Maybe" means test if the RCU implementation + under test support RCU priority boosting. + + rcutorture.test_boost_duration= [KNL,BOOT] + Duration (s) of each individual boost test. + + rcutorture.test_boost_interval= [KNL,BOOT] + Interval (s) between each boost test. + + rcutorture.test_no_idle_hz= [KNL,BOOT] + Test RCU's dyntick-idle handling. See also the + rcutorture.shuffle_interval parameter. + + rcutorture.torture_type= [KNL,BOOT] + Specify the RCU implementation to test. + + rcutorture.verbose= [KNL,BOOT] + Enable additional printk() statements. + rdinit= [KNL] Format: <full_path> Run specified binary instead of /init from the ramdisk, diff --git a/MAINTAINERS b/MAINTAINERS index 1a2f8f5823e0..a1c2ab2c6d60 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5607,14 +5607,13 @@ F: net/rds/ READ-COPY UPDATE (RCU) M: Dipankar Sarma <dipankar@in.ibm.com> M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> -W: http://www.rdrop.com/users/paulmck/rclock/ +W: http://www.rdrop.com/users/paulmck/RCU/ S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git F: Documentation/RCU/ +X: Documentation/RCU/torture.txt F: include/linux/rcu* -F: include/linux/srcu* F: kernel/rcu* -F: kernel/srcu* X: kernel/rcutorture.c REAL TIME CLOCK (RTC) SUBSYSTEM @@ -6131,6 +6130,15 @@ S: Maintained F: include/linux/sl?b*.h F: mm/sl?b.c +SLEEPABLE READ-COPY UPDATE (SRCU) +M: Lai Jiangshan <laijs@cn.fujitsu.com> +M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> +W: http://www.rdrop.com/users/paulmck/RCU/ +S: Supported +T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git +F: include/linux/srcu* +F: kernel/srcu* + SMC91x ETHERNET DRIVER M: Nicolas Pitre <nico@fluxnic.net> S: Odd Fixes diff --git a/include/linux/rculist.h b/include/linux/rculist.h index d079290843a9..e0f0fab20415 100644 --- a/include/linux/rculist.h +++ b/include/linux/rculist.h @@ -30,6 +30,7 @@ * This is only for internal list manipulation where we know * the prev/next entries already! */ +#ifndef CONFIG_DEBUG_LIST static inline void __list_add_rcu(struct list_head *new, struct list_head *prev, struct list_head *next) { @@ -38,6 +39,10 @@ static inline void __list_add_rcu(struct list_head *new, rcu_assign_pointer(list_next_rcu(prev), new); next->prev = new; } +#else +extern void __list_add_rcu(struct list_head *new, + struct list_head *prev, struct list_head *next); +#endif /** * list_add_rcu - add a new entry to rcu-protected list @@ -108,7 +113,7 @@ static inline void list_add_tail_rcu(struct list_head *new, */ static inline void list_del_rcu(struct list_head *entry) { - __list_del(entry->prev, entry->next); + __list_del_entry(entry); entry->prev = LIST_POISON2; } @@ -228,18 +233,43 @@ static inline void list_splice_init_rcu(struct list_head *list, }) /** - * list_first_entry_rcu - get the first element from a list + * Where are list_empty_rcu() and list_first_entry_rcu()? + * + * Implementing those functions following their counterparts list_empty() and + * list_first_entry() is not advisable because they lead to subtle race + * conditions as the following snippet shows: + * + * if (!list_empty_rcu(mylist)) { + * struct foo *bar = list_first_entry_rcu(mylist, struct foo, list_member); + * do_something(bar); + * } + * + * The list may not be empty when list_empty_rcu checks it, but it may be when + * list_first_entry_rcu rereads the ->next pointer. + * + * Rereading the ->next pointer is not a problem for list_empty() and + * list_first_entry() because they would be protected by a lock that blocks + * writers. + * + * See list_first_or_null_rcu for an alternative. + */ + +/** + * list_first_or_null_rcu - get the first element from a list * @ptr: the list head to take the element from. * @type: the type of the struct this is embedded in. * @member: the name of the list_struct within the struct. * - * Note, that list is expected to be not empty. + * Note that if the list is empty, it returns NULL. * * This primitive may safely run concurrently with the _rcu list-mutation * primitives such as list_add_rcu() as long as it's guarded by rcu_read_lock(). */ -#define list_first_entry_rcu(ptr, type, member) \ - list_entry_rcu((ptr)->next, type, member) +#define list_first_or_null_rcu(ptr, type, member) \ + ({struct list_head *__ptr = (ptr); \ + struct list_head __rcu *__next = list_next_rcu(__ptr); \ + likely(__ptr != __next) ? container_of(__next, type, member) : NULL; \ + }) /** * list_for_each_entry_rcu - iterate over rcu list of given type diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 29665a3b3ac5..26d1a47591f1 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -924,6 +924,21 @@ void __kfree_rcu(struct rcu_head *head, unsigned long offset) kfree_call_rcu(head, (rcu_callback)offset); } +/* + * Does the specified offset indicate that the corresponding rcu_head + * structure can be handled by kfree_rcu()? + */ +#define __is_kfree_rcu_offset(offset) ((offset) < 4096) + +/* + * Helper macro for kfree_rcu() to prevent argument-expansion eyestrain. + */ +#define __kfree_rcu(head, offset) \ + do { \ + BUILD_BUG_ON(!__is_kfree_rcu_offset(offset)); \ + call_rcu(head, (void (*)(struct rcu_head *))(unsigned long)(offset)); \ + } while (0) + /** * kfree_rcu() - kfree an object after a grace period. * @ptr: pointer to kfree @@ -946,6 +961,9 @@ void __kfree_rcu(struct rcu_head *head, unsigned long offset) * * Note that the allowable offset might decrease in the future, for example, * to allow something like kmem_cache_free_rcu(). + * + * The BUILD_BUG_ON check must not involve any function calls, hence the + * checks are done in macros here. */ #define kfree_rcu(ptr, rcu_head) \ __kfree_rcu(&((ptr)->rcu_head), offsetof(typeof(*(ptr)), rcu_head)) diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index 782a8ab51bc1..3c6083cde4fc 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -86,13 +86,6 @@ extern void rcu_force_quiescent_state(void); extern void rcu_bh_force_quiescent_state(void); extern void rcu_sched_force_quiescent_state(void); -/* A context switch is a grace period for RCU-sched and RCU-bh. */ -static inline int rcu_blocking_is_gp(void) -{ - might_sleep(); /* Check for RCU read-side critical section. */ - return num_online_cpus() == 1; -} - extern void rcu_scheduler_starting(void); extern int rcu_scheduler_active __read_mostly; diff --git a/include/linux/srcu.h b/include/linux/srcu.h index d3d5fa54f25e..55a5c52cbb25 100644 --- a/include/linux/srcu.h +++ b/include/linux/srcu.h @@ -29,26 +29,35 @@ #include <linux/mutex.h> #include <linux/rcupdate.h> +#include <linux/workqueue.h> struct srcu_struct_array { - int c[2]; + unsigned long c[2]; + unsigned long seq[2]; +}; + +struct rcu_batch { + struct rcu_head *head, **tail; }; struct srcu_struct { - int completed; + unsigned completed; struct srcu_struct_array __percpu *per_cpu_ref; - struct mutex mutex; + spinlock_t queue_lock; /* protect ->batch_queue, ->running */ + bool running; + /* callbacks just queued */ + struct rcu_batch batch_queue; + /* callbacks try to do the first check_zero */ + struct rcu_batch batch_check0; + /* callbacks done with the first check_zero and the flip */ + struct rcu_batch batch_check1; + struct rcu_batch batch_done; + struct delayed_work work; #ifdef CONFIG_DEBUG_LOCK_ALLOC struct lockdep_map dep_map; #endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */ }; -#ifndef CONFIG_PREEMPT -#define srcu_barrier() barrier() -#else /* #ifndef CONFIG_PREEMPT */ -#define srcu_barrier() -#endif /* #else #ifndef CONFIG_PREEMPT */ - #ifdef CONFIG_DEBUG_LOCK_ALLOC int __init_srcu_struct(struct srcu_struct *sp, const char *name, @@ -67,12 +76,33 @@ int init_srcu_struct(struct srcu_struct *sp); #endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */ +/** + * call_srcu() - Queue a callback for invocation after an SRCU grace period + * @sp: srcu_struct in queue the callback + * @head: structure to be used for queueing the SRCU callback. + * @func: function to be invoked after the SRCU grace period + * + * The callback function will be invoked some time after a full SRCU + * grace period elapses, in other words after all pre-existing SRCU + * read-side critical sections have completed. However, the callback + * function might well execute concurrently with other SRCU read-side + * critical sections that started after call_srcu() was invoked. SRCU + * read-side critical sections are delimited by srcu_read_lock() and + * srcu_read_unlock(), and may be nested. + * + * The callback will be invoked from process context, but must nevertheless + * be fast and must not block. + */ +void call_srcu(struct srcu_struct *sp, struct rcu_head *head, + void (*func)(struct rcu_head *head)); + void cleanup_srcu_struct(struct srcu_struct *sp); int __srcu_read_lock(struct srcu_struct *sp) __acquires(sp); void __srcu_read_unlock(struct srcu_struct *sp, int idx) __releases(sp); void synchronize_srcu(struct srcu_struct *sp); void synchronize_srcu_expedited(struct srcu_struct *sp); long srcu_batches_completed(struct srcu_struct *sp); +void srcu_barrier(struct srcu_struct *sp); #ifdef CONFIG_DEBUG_LOCK_ALLOC diff --git a/include/trace/events/rcu.h b/include/trace/events/rcu.h index 337099783f37..1480900c511c 100644 --- a/include/trace/events/rcu.h +++ b/include/trace/events/rcu.h @@ -292,6 +292,8 @@ TRACE_EVENT(rcu_dyntick, * "More callbacks": Still more callbacks, try again to clear them out. * "Callbacks drained": All callbacks processed, off to dyntick idle! * "Timer": Timer fired to cause CPU to continue processing callbacks. + * "Demigrate": Timer fired on wrong CPU, woke up correct CPU. + * "Cleanup after idle": Idle exited, timer canceled. */ TRACE_EVENT(rcu_prep_idle, diff --git a/init/Kconfig b/init/Kconfig index 6cfd71d06463..6d18ef8071b5 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -458,6 +458,33 @@ config RCU_FANOUT Select a specific number if testing RCU itself. Take the default if unsure. +config RCU_FANOUT_LEAF + int "Tree-based hierarchical RCU leaf-level fanout value" + range 2 RCU_FANOUT if 64BIT + range 2 RCU_FANOUT if !64BIT + depends on TREE_RCU || TREE_PREEMPT_RCU + default 16 + help + This option controls the leaf-level fanout of hierarchical + implementations of RCU, and allows trading off cache misses + against lock contention. Systems that synchronize their + scheduling-clock interrupts for energy-efficiency reasons will + want the default because the smaller leaf-level fanout keeps + lock contention levels acceptably low. Very large systems + (hundreds or thousands of CPUs) will instead want to set this + value to the maximum value possible in order to reduce the + number of cache misses incurred during RCU's grace-period + initialization. These systems tend to run CPU-bound, and thus + are not helped by synchronized interrupts, and thus tend to + skew them, which reduces lock contention enough that large + leaf-level fanouts work well. + + Select a specific number if testing RCU itself. + + Select the maximum permissible value for large systems. + + Take the default if unsure. + config RCU_FANOUT_EXACT bool "Disable tree-based hierarchical RCU auto-balancing" depends on TREE_RCU || TREE_PREEMPT_RCU @@ -515,10 +542,25 @@ config RCU_BOOST_PRIO depends on RCU_BOOST default 1 help - This option specifies the real-time priority to which preempted - RCU readers are to be boosted. If you are working with CPU-bound - real-time applications, you should specify a priority higher then - the highest-priority CPU-bound application. + This option specifies the real-time priority to which long-term + preempted RCU readers are to be boosted. If you are working + with a real-time application that has one or more CPU-bound + threads running at a real-time priority level, you should set + RCU_BOOST_PRIO to a priority higher then the highest-priority + real-time CPU-bound thread. The default RCU_BOOST_PRIO value + of 1 is appropriate in the common case, which is real-time + applications that do not have any CPU-bound threads. + + Some real-time applications might not have a single real-time + thread that saturates a given CPU, but instead might have + multiple real-time threads that, taken together, fully utilize + that CPU. In this case, you should set RCU_BOOST_PRIO to + a priority higher than the lowest-priority thread that is + conspiring to prevent the CPU from running any non-real-time + tasks. For example, if one thread at priority 10 and another + thread at priority 5 are between themselves fully consuming + the CPU time on a given CPU, then RCU_BOOST_PRIO should be + set to priority 6 or higher. Specify the real-time priority, or take the default if unsure. diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c index a89b381a8c6e..e66b34ab7555 100644 --- a/kernel/rcutorture.c +++ b/kernel/rcutorture.c @@ -64,6 +64,7 @@ static int irqreader = 1; /* RCU readers from irq (timers). */ static int fqs_duration; /* Duration of bursts (us), 0 to disable. */ static int fqs_holdoff; /* Hold time within burst (us). */ static int fqs_stutter = 3; /* Wait time between bursts (s). */ +static int n_barrier_cbs; /* Number of callbacks to test RCU barriers. */ static int onoff_interval; /* Wait time between CPU hotplugs, 0=disable. */ static int onoff_holdoff; /* Seconds after boot before CPU hotplugs. */ static int shutdown_secs; /* Shutdown time (s). <=0 for no shutdown. */ @@ -96,6 +97,8 @@ module_param(fqs_holdoff, int, 0444); MODULE_PARM_DESC(fqs_holdoff, "Holdoff time within fqs bursts (us)"); module_param(fqs_stutter, int, 0444); MODULE_PARM_DESC(fqs_stutter, "Wait time between fqs bursts (s)"); +module_param(n_barrier_cbs, int, 0444); +MODULE_PARM_DESC(n_barrier_cbs, "# of callbacks/kthreads for barrier testing"); module_param(onoff_interval, int, 0444); MODULE_PARM_DESC(onoff_interval, "Time between CPU hotplugs (s), 0=disable"); module_param(onoff_holdoff, int, 0444); @@ -139,6 +142,8 @@ static struct task_struct *shutdown_task; static struct task_struct *onoff_task; #endif /* #ifdef CONFIG_HOTPLUG_CPU */ static struct task_struct *stall_task; +static struct task_struct **barrier_cbs_tasks; +static struct task_struct *barrier_task; #define RCU_TORTURE_PIPE_LEN 10 @@ -164,6 +169,7 @@ static atomic_t n_rcu_torture_alloc_fail; static atomic_t n_rcu_torture_free; static atomic_t n_rcu_torture_mberror; static atomic_t n_rcu_torture_error; +static long n_rcu_torture_barrier_error; static long n_rcu_torture_boost_ktrerror; static long n_rcu_torture_boost_rterror; static long n_rcu_torture_boost_failure; @@ -173,6 +179,8 @@ static long n_offline_attempts; static long n_offline_successes; static long n_online_attempts; static long n_online_successes; +static long n_barrier_attempts; +static long n_barrier_successes; static struct list_head rcu_torture_removed; static cpumask_var_t shuffle_tmp_mask; @@ -197,6 +205,10 @@ static unsigned long shutdown_time; /* jiffies to system shutdown. */ static unsigned long boost_starttime; /* jiffies of next boost test start. */ DEFINE_MUTEX(boost_mutex); /* protect setting boost_starttime */ /* and boost task create/destroy. */ +static atomic_t barrier_cbs_count; /* Barrier callbacks registered. */ +static atomic_t barrier_cbs_invoked; /* Barrier callbacks invoked. */ +static wait_queue_head_t *barrier_cbs_wq; /* Coordinate barrier testing. */ +static DECLARE_WAIT_QUEUE_HEAD(barrier_wq); /* Mediate rmmod and system shutdown. Concurrent rmmod & shutdown illegal! */ @@ -327,6 +339,7 @@ struct rcu_torture_ops { int (*completed)(void); void (*deferred_free)(struct rcu_torture *p); void (*sync)(void); + void (*call)(struct rcu_head *head, void (*func)(struct rcu_head *rcu)); void (*cb_barrier)(void); void (*fqs)(void); int (*stats)(char *page); @@ -417,6 +430,7 @@ static struct rcu_torture_ops rcu_ops = { .completed = rcu_torture_completed, .deferred_free = rcu_torture_deferred_free, .sync = synchronize_rcu, + .call = call_rcu, .cb_barrier = rcu_barrier, .fqs = rcu_force_quiescent_state, .stats = NULL, @@ -460,6 +474,7 @@ static struct rcu_torture_ops rcu_sync_ops = { .completed = rcu_torture_completed, .deferred_free = rcu_sync_torture_deferred_free, .sync = synchronize_rcu, + .call = NULL, .cb_barrier = NULL, .fqs = rcu_force_quiescent_state, .stats = NULL, @@ -477,6 +492,7 @@ static struct rcu_torture_ops rcu_expedited_ops = { .completed = rcu_no_completed, .deferred_free = rcu_sync_torture_deferred_free, .sync = synchronize_rcu_expedited, + .call = NULL, .cb_barrier = NULL, .fqs = rcu_force_quiescent_state, .stats = NULL, @@ -519,6 +535,7 @@ static struct rcu_torture_ops rcu_bh_ops = { .completed = rcu_bh_torture_completed, .deferred_free = rcu_bh_torture_deferred_free, .sync = synchronize_rcu_bh, + .call = call_rcu_bh, .cb_barrier = rcu_barrier_bh, .fqs = rcu_bh_force_quiescent_state, .stats = NULL, @@ -535,6 +552,7 @@ static struct rcu_torture_ops rcu_bh_sync_ops = { .completed = rcu_bh_torture_completed, .deferred_free = rcu_sync_torture_deferred_free, .sync = synchronize_rcu_bh, + .call = NULL, .cb_barrier = NULL, .fqs = rcu_bh_force_quiescent_state, .stats = NULL, @@ -551,6 +569,7 @@ static struct rcu_torture_ops rcu_bh_expedited_ops = { .completed = rcu_bh_torture_completed, .deferred_free = rcu_sync_torture_deferred_free, .sync = synchronize_rcu_bh_expedited, + .call = NULL, .cb_barrier = NULL, .fqs = rcu_bh_force_quiescent_state, .stats = NULL, @@ -606,6 +625,11 @@ static int srcu_torture_completed(void) return srcu_batches_completed(&srcu_ctl); } +static void srcu_torture_deferred_free(struct rcu_torture *rp) +{ + call_srcu(&srcu_ctl, &rp->rtort_rcu, rcu_torture_cb); +} + static void srcu_torture_synchronize(void) { synchronize_srcu(&srcu_ctl); @@ -620,7 +644,7 @@ static int srcu_torture_stats(char *page) cnt += sprintf(&page[cnt], "%s%s per-CPU(idx=%d):", torture_type, TORTURE_FLAG, idx); for_each_possible_cpu(cpu) { - cnt += sprintf(&page[cnt], " %d(%d,%d)", cpu, + cnt += sprintf(&page[cnt], " %d(%lu,%lu)", cpu, per_cpu_ptr(srcu_ctl.per_cpu_ref, cpu)->c[!idx], per_cpu_ptr(srcu_ctl.per_cpu_ref, cpu)->c[idx]); } @@ -635,13 +659,29 @@ static struct rcu_torture_ops srcu_ops = { .read_delay = srcu_read_delay, .readunlock = srcu_torture_read_unlock, .completed = srcu_torture_completed, - .deferred_free = rcu_sync_torture_deferred_free, + .deferred_free = srcu_torture_deferred_free, .sync = srcu_torture_synchronize, + .call = NULL, .cb_barrier = NULL, .stats = srcu_torture_stats, .name = "srcu" }; +static struct rcu_torture_ops srcu_sync_ops = { + .init = srcu_torture_init, + .cleanup = srcu_torture_cleanup, + .readlock = srcu_torture_read_lock, + .read_delay = srcu_read_delay, + .readunlock = srcu_torture_read_unlock, + .completed = srcu_torture_completed, + .deferred_free = rcu_sync_torture_deferred_free, + .sync = srcu_torture_synchronize, + .call = NULL, + .cb_barrier = NULL, + .stats = srcu_torture_stats, + .name = "srcu_sync" +}; + static int srcu_torture_read_lock_raw(void) __acquires(&srcu_ctl) { return srcu_read_lock_raw(&srcu_ctl); @@ -659,13 +699,29 @@ static struct rcu_torture_ops srcu_raw_ops = { .read_delay = srcu_read_delay, .readunlock = srcu_torture_read_unlock_raw, .completed = srcu_torture_completed, - .deferred_free = rcu_sync_torture_deferred_free, + .deferred_free = srcu_torture_deferred_free, .sync = srcu_torture_synchronize, + .call = NULL, .cb_barrier = NULL, .stats = srcu_torture_stats, .name = "srcu_raw" }; +static struct rcu_torture_ops srcu_raw_sync_ops = { + .init = srcu_torture_init, + .cleanup = srcu_torture_cleanup, + .readlock = srcu_torture_read_lock_raw, + .read_delay = srcu_read_delay, + .readunlock = srcu_torture_read_unlock_raw, + .completed = srcu_torture_completed, + .deferred_free = rcu_sync_torture_deferred_free, + .sync = srcu_torture_synchronize, + .call = NULL, + .cb_barrier = NULL, + .stats = srcu_torture_stats, + .name = "srcu_raw_sync" +}; + static void srcu_torture_synchronize_expedited(void) { synchronize_srcu_expedited(&srcu_ctl); @@ -680,6 +736,7 @@ static struct rcu_torture_ops srcu_expedited_ops = { .completed = srcu_torture_completed, .deferred_free = rcu_sync_torture_deferred_free, .sync = srcu_torture_synchronize_expedited, + .call = NULL, .cb_barrier = NULL, .stats = srcu_torture_stats, .name = "srcu_expedited" @@ -1129,7 +1186,8 @@ rcu_torture_printk(char *page) "rtc: %p ver: %lu tfle: %d rta: %d rtaf: %d rtf: %d " "rtmbe: %d rtbke: %ld rtbre: %ld " "rtbf: %ld rtb: %ld nt: %ld " - "onoff: %ld/%ld:%ld/%ld", + "onoff: %ld/%ld:%ld/%ld " + "barrier: %ld/%ld:%ld", rcu_torture_current, rcu_torture_current_version, list_empty(&rcu_torture_freelist), @@ -1145,14 +1203,17 @@ rcu_torture_printk(char *page) n_online_successes, n_online_attempts, n_offline_successes, - n_offline_attempts); + n_offline_attempts, + n_barrier_successes, + n_barrier_attempts, + n_rcu_torture_barrier_error); + cnt += sprintf(&page[cnt], "\n%s%s ", torture_type, TORTURE_FLAG); if (atomic_read(&n_rcu_torture_mberror) != 0 || + n_rcu_torture_barrier_error != 0 || n_rcu_torture_boost_ktrerror != 0 || n_rcu_torture_boost_rterror != 0 || - n_rcu_torture_boost_failure != 0) - cnt += sprintf(&page[cnt], " !!!"); - cnt += sprintf(&page[cnt], "\n%s%s ", torture_type, TORTURE_FLAG); - if (i > 1) { + n_rcu_torture_boost_failure != 0 || + i > 1) { cnt += sprintf(&page[cnt], "!!! "); atomic_inc(&n_rcu_torture_error); WARN_ON_ONCE(1); @@ -1337,6 +1398,7 @@ static void rcutorture_booster_cleanup(int cpu) /* This must be outside of the mutex, otherwise deadlock! */ kthread_stop(t); + boost_tasks[cpu] = NULL; } static int rcutorture_booster_init(int cpu) @@ -1484,13 +1546,15 @@ static void rcu_torture_onoff_cleanup(void) return; VERBOSE_PRINTK_STRING("Stopping rcu_torture_onoff task"); kthread_stop(onoff_task); + onoff_task = NULL; } #else /* #ifdef CONFIG_HOTPLUG_CPU */ -static void +static int rcu_torture_onoff_init(void) { + return 0; } static void rcu_torture_onoff_cleanup(void) @@ -1554,6 +1618,152 @@ static void rcu_torture_stall_cleanup(void) return; VERBOSE_PRINTK_STRING("Stopping rcu_torture_stall_task."); kthread_stop(stall_task); + stall_task = NULL; +} + +/* Callback function for RCU barrier testing. */ +void rcu_torture_barrier_cbf(struct rcu_head *rcu) +{ + atomic_inc(&barrier_cbs_invoked); +} + +/* kthread function to register callbacks used to test RCU barriers. */ +static int rcu_torture_barrier_cbs(void *arg) +{ + long myid = (long)arg; + struct rcu_head rcu; + + init_rcu_head_on_stack(&rcu); + VERBOSE_PRINTK_STRING("rcu_torture_barrier_cbs task started"); + set_user_nice(current, 19); + do { + wait_event(barrier_cbs_wq[myid], + atomic_read(&barrier_cbs_count) == n_barrier_cbs || + kthread_should_stop() || + fullstop != FULLSTOP_DONTSTOP); + if (kthread_should_stop() || fullstop != FULLSTOP_DONTSTOP) + break; + cur_ops->call(&rcu, rcu_torture_barrier_cbf); + if (atomic_dec_and_test(&barrier_cbs_count)) + wake_up(&barrier_wq); + } while (!kthread_should_stop() && fullstop == FULLSTOP_DONTSTOP); + VERBOSE_PRINTK_STRING("rcu_torture_barrier_cbs task stopping"); + rcutorture_shutdown_absorb("rcu_torture_barrier_cbs"); + while (!kthread_should_stop()) + schedule_timeout_interruptible(1); + cur_ops->cb_barrier(); + destroy_rcu_head_on_stack(&rcu); + return 0; +} + +/* kthread function to drive and coordinate RCU barrier testing. */ +static int rcu_torture_barrier(void *arg) +{ + int i; + + VERBOSE_PRINTK_STRING("rcu_torture_barrier task starting"); + do { + atomic_set(&barrier_cbs_invoked, 0); + atomic_set(&barrier_cbs_count, n_barrier_cbs); + /* wake_up() path contains the required barriers. */ + for (i = 0; i < n_barrier_cbs; i++) + wake_up(&barrier_cbs_wq[i]); + wait_event(barrier_wq, + atomic_read(&barrier_cbs_count) == 0 || + kthread_should_stop() || + fullstop != FULLSTOP_DONTSTOP); + if (kthread_should_stop() || fullstop != FULLSTOP_DONTSTOP) + break; + n_barrier_attempts++; + cur_ops->cb_barrier(); + if (atomic_read(&barrier_cbs_invoked) != n_barrier_cbs) { + n_rcu_torture_barrier_error++; + WARN_ON_ONCE(1); + } + n_barrier_successes++; + schedule_timeout_interruptible(HZ / 10); + } while (!kthread_should_stop() && fullstop == FULLSTOP_DONTSTOP); + VERBOSE_PRINTK_STRING("rcu_torture_barrier task stopping"); + rcutorture_shutdown_absorb("rcu_torture_barrier_cbs"); + while (!kthread_should_stop()) + schedule_timeout_interruptible(1); + return 0; +} + +/* Initialize RCU barrier testing. */ +static int rcu_torture_barrier_init(void) +{ + int i; + int ret; + + if (n_barrier_cbs == 0) + return 0; + if (cur_ops->call == NULL || cur_ops->cb_barrier == NULL) { + printk(KERN_ALERT "%s" TORTURE_FLAG + " Call or barrier ops missing for %s,\n", + torture_type, cur_ops->name); + printk(KERN_ALERT "%s" TORTURE_FLAG + " RCU barrier testing omitted from run.\n", + torture_type); + return 0; + } + atomic_set(&barrier_cbs_count, 0); + atomic_set(&barrier_cbs_invoked, 0); + barrier_cbs_tasks = + kzalloc(n_barrier_cbs * sizeof(barrier_cbs_tasks[0]), + GFP_KERNEL); + barrier_cbs_wq = + kzalloc(n_barrier_cbs * sizeof(barrier_cbs_wq[0]), + GFP_KERNEL); + if (barrier_cbs_tasks == NULL || barrier_cbs_wq == 0) + return -ENOMEM; + for (i = 0; i < n_barrier_cbs; i++) { + init_waitqueue_head(&barrier_cbs_wq[i]); + barrier_cbs_tasks[i] = kthread_run(rcu_torture_barrier_cbs, + (void *)(long)i, + "rcu_torture_barrier_cbs"); + if (IS_ERR(barrier_cbs_tasks[i])) { + ret = PTR_ERR(barrier_cbs_tasks[i]); + VERBOSE_PRINTK_ERRSTRING("Failed to create rcu_torture_barrier_cbs"); + barrier_cbs_tasks[i] = NULL; + return ret; + } + } + barrier_task = kthread_run(rcu_torture_barrier, NULL, + "rcu_torture_barrier"); + if (IS_ERR(barrier_task)) { + ret = PTR_ERR(barrier_task); + VERBOSE_PRINTK_ERRSTRING("Failed to create rcu_torture_barrier"); + barrier_task = NULL; + } + return 0; +} + +/* Clean up after RCU barrier testing. */ +static void rcu_torture_barrier_cleanup(void) +{ + int i; + + if (barrier_task != NULL) { + VERBOSE_PRINTK_STRING("Stopping rcu_torture_barrier task"); + kthread_stop(barrier_task); + barrier_task = NULL; + } + if (barrier_cbs_tasks != NULL) { + for (i = 0; i < n_barrier_cbs; i++) { + if (barrier_cbs_tasks[i] != NULL) { + VERBOSE_PRINTK_STRING("Stopping rcu_torture_barrier_cbs task"); + kthread_stop(barrier_cbs_tasks[i]); + barrier_cbs_tasks[i] = NULL; + } + } + kfree(barrier_cbs_tasks); + barrier_cbs_tasks = NULL; + } + if (barrier_cbs_wq != NULL) { + kfree(barrier_cbs_wq); + barrier_cbs_wq = NULL; + } } static int rcutorture_cpu_notify(struct notifier_block *self, @@ -1598,6 +1808,7 @@ rcu_torture_cleanup(void) fullstop = FULLSTOP_RMMOD; mutex_unlock(&fullstop_mutex); unregister_reboot_notifier(&rcutorture_shutdown_nb); + rcu_torture_barrier_cleanup(); rcu_torture_stall_cleanup(); if (stutter_task) { VERBOSE_PRINTK_STRING("Stopping rcu_torture_stutter task"); @@ -1665,6 +1876,7 @@ rcu_torture_cleanup(void) VERBOSE_PRINTK_STRING("Stopping rcu_torture_shutdown task"); kthread_stop(shutdown_task); } + shutdown_task = NULL; rcu_torture_onoff_cleanup(); /* Wait for all RCU callbacks to fire. */ @@ -1676,7 +1888,7 @@ rcu_torture_cleanup(void) if (cur_ops->cleanup) cur_ops->cleanup(); - if (atomic_read(&n_rcu_torture_error)) + if (atomic_read(&n_rcu_torture_error) || n_rcu_torture_barrier_error) rcu_torture_print_module_parms(cur_ops, "End of test: FAILURE"); else if (n_online_successes != n_online_attempts || n_offline_successes != n_offline_attempts) @@ -1692,10 +1904,12 @@ rcu_torture_init(void) int i; int cpu; int firsterr = 0; + int retval; static struct rcu_torture_ops *torture_ops[] = { &rcu_ops, &rcu_sync_ops, &rcu_expedited_ops, &rcu_bh_ops, &rcu_bh_sync_ops, &rcu_bh_expedited_ops, - &srcu_ops, &srcu_raw_ops, &srcu_expedited_ops, + &srcu_ops, &srcu_sync_ops, &srcu_raw_ops, + &srcu_raw_sync_ops, &srcu_expedited_ops, &sched_ops, &sched_sync_ops, &sched_expedited_ops, }; mutex_lock(&fullstop_mutex); @@ -1749,6 +1963,7 @@ rcu_torture_init(void) atomic_set(&n_rcu_torture_free, 0); atomic_set(&n_rcu_torture_mberror, 0); atomic_set(&n_rcu_torture_error, 0); + n_rcu_torture_barrier_error = 0; n_rcu_torture_boost_ktrerror = 0; n_rcu_torture_boost_rterror = 0; n_rcu_torture_boost_failure = 0; @@ -1872,7 +2087,6 @@ rcu_torture_init(void) test_boost_duration = 2; if ((test_boost == 1 && cur_ops->can_boost) || test_boost == 2) { - int retval; boost_starttime = jiffies + test_boost_interval * HZ; register_cpu_notifier(&rcutorture_cpu_nb); @@ -1897,9 +2111,22 @@ rcu_torture_init(void) goto unwind; } } - rcu_torture_onoff_init(); + i = rcu_torture_onoff_init(); + if (i != 0) { + firsterr = i; + goto unwind; + } register_reboot_notifier(&rcutorture_shutdown_nb); - rcu_torture_stall_init(); + i = rcu_torture_stall_init(); + if (i != 0) { + firsterr = i; + goto unwind; + } + retval = rcu_torture_barrier_init(); + if (retval != 0) { + firsterr = retval; + goto unwind; + } rcutorture_record_test_transition(); mutex_unlock(&fullstop_mutex); return 0; diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 61351505ec78..b3ea3ac3a2b5 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -75,6 +75,8 @@ static struct lock_class_key rcu_node_class[NUM_RCU_LVLS]; .gpnum = -300, \ .completed = -300, \ .onofflock = __RAW_SPIN_LOCK_UNLOCKED(&structname##_state.onofflock), \ + .orphan_nxttail = &structname##_state.orphan_nxtlist, \ + .orphan_donetail = &structname##_state.orphan_donelist, \ .fqslock = __RAW_SPIN_LOCK_UNLOCKED(&structname##_state.fqslock), \ .n_force_qs = 0, \ .n_force_qs_ngp = 0, \ @@ -145,6 +147,13 @@ static void invoke_rcu_callbacks(struct rcu_state *rsp, struct rcu_data *rdp); unsigned long rcutorture_testseq; unsigned long rcutorture_vernum; +/* State information for rcu_barrier() and friends. */ + +static DEFINE_PER_CPU(struct rcu_head, rcu_barrier_head) = {NULL}; +static atomic_t rcu_barrier_cpu_count; +static DEFINE_MUTEX(rcu_barrier_mutex); +static struct completion rcu_barrier_completion; + /* * Return true if an RCU grace period is in progress. The ACCESS_ONCE()s * permit this function to be invoked without holding the root rcu_node @@ -1310,95 +1319,133 @@ rcu_check_quiescent_state(struct rcu_state *rsp, struct rcu_data *rdp) #ifdef CONFIG_HOTPLUG_CPU /* - * Move a dying CPU's RCU callbacks to online CPU's callback list. - * Also record a quiescent state for this CPU for the current grace period. - * Synchronization and interrupt disabling are not required because - * this function executes in stop_machine() context. Therefore, cleanup - * operations that might block must be done later from the CPU_DEAD - * notifier. - * - * Note that the outgoing CPU's bit has already been cleared in the - * cpu_online_mask. This allows us to randomly pick a callback - * destination from the bits set in that mask. + * Send the specified CPU's RCU callbacks to the orphanage. The + * specified CPU must be offline, and the caller must hold the + * ->onofflock. */ -static void rcu_cleanup_dying_cpu(struct rcu_state *rsp) +static void +rcu_send_cbs_to_orphanage(int cpu, struct rcu_state *rsp, + struct rcu_node *rnp, struct rcu_data *rdp) { int i; - unsigned long mask; - int receive_cpu = cpumask_any(cpu_online_mask); - struct rcu_data *rdp = this_cpu_ptr(rsp->rda); - struct rcu_data *receive_rdp = per_cpu_ptr(rsp->rda, receive_cpu); - RCU_TRACE(struct rcu_node *rnp = rdp->mynode); /* For dying CPU. */ - /* First, adjust the counts. */ + /* + * Orphan the callbacks. First adjust the counts. This is safe + * because ->onofflock excludes _rcu_barrier()'s adoption of + * the callbacks, thus no memory barrier is required. + */ if (rdp->nxtlist != NULL) { - receive_rdp->qlen_lazy += rdp->qlen_lazy; - receive_rdp->qlen += rdp->qlen; + rsp->qlen_lazy += rdp->qlen_lazy; + rsp->qlen += rdp->qlen; + rdp->n_cbs_orphaned += rdp->qlen; rdp->qlen_lazy = 0; rdp->qlen = 0; } /* - * Next, move ready-to-invoke callbacks to be invoked on some - * other CPU. These will not be required to pass through another - * grace period: They are done, regardless of CPU. + * Next, move those callbacks still needing a grace period to + * the orphanage, where some other CPU will pick them up. + * Some of the callbacks might have gone partway through a grace + * period, but that is too bad. They get to start over because we + * cannot assume that grace periods are synchronized across CPUs. + * We don't bother updating the ->nxttail[] array yet, instead + * we just reset the whole thing later on. */ - if (rdp->nxtlist != NULL && - rdp->nxttail[RCU_DONE_TAIL] != &rdp->nxtlist) { - struct rcu_head *oldhead; - struct rcu_head **oldtail; - struct rcu_head **newtail; - - oldhead = rdp->nxtlist; - oldtail = receive_rdp->nxttail[RCU_DONE_TAIL]; - rdp->nxtlist = *rdp->nxttail[RCU_DONE_TAIL]; - *rdp->nxttail[RCU_DONE_TAIL] = *oldtail; - *receive_rdp->nxttail[RCU_DONE_TAIL] = oldhead; - newtail = rdp->nxttail[RCU_DONE_TAIL]; - for (i = RCU_DONE_TAIL; i < RCU_NEXT_SIZE; i++) { - if (receive_rdp->nxttail[i] == oldtail) - receive_rdp->nxttail[i] = newtail; - if (rdp->nxttail[i] == newtail) - rdp->nxttail[i] = &rdp->nxtlist; - } + if (*rdp->nxttail[RCU_DONE_TAIL] != NULL) { + *rsp->orphan_nxttail = *rdp->nxttail[RCU_DONE_TAIL]; + rsp->orphan_nxttail = rdp->nxttail[RCU_NEXT_TAIL]; + *rdp->nxttail[RCU_DONE_TAIL] = NULL; } /* - * Finally, put the rest of the callbacks at the end of the list. - * The ones that made it partway through get to start over: We - * cannot assume that grace periods are synchronized across CPUs. - * (We could splice RCU_WAIT_TAIL into RCU_NEXT_READY_TAIL, but - * this does not seem compelling. Not yet, anyway.) + * Then move the ready-to-invoke callbacks to the orphanage, + * where some other CPU will pick them up. These will not be + * required to pass though another grace period: They are done. */ if (rdp->nxtlist != NULL) { - *receive_rdp->nxttail[RCU_NEXT_TAIL] = rdp->nxtlist; - receive_rdp->nxttail[RCU_NEXT_TAIL] = - rdp->nxttail[RCU_NEXT_TAIL]; - receive_rdp->n_cbs_adopted += rdp->qlen; - rdp->n_cbs_orphaned += rdp->qlen; - - rdp->nxtlist = NULL; - for (i = 0; i < RCU_NEXT_SIZE; i++) - rdp->nxttail[i] = &rdp->nxtlist; + *rsp->orphan_donetail = rdp->nxtlist; + rsp->orphan_donetail = rdp->nxttail[RCU_DONE_TAIL]; } + /* Finally, initialize the rcu_data structure's list to empty. */ + rdp->nxtlist = NULL; + for (i = 0; i < RCU_NEXT_SIZE; i++) + rdp->nxttail[i] = &rdp->nxtlist; +} + +/* + * Adopt the RCU callbacks from the specified rcu_state structure's + * orphanage. The caller must hold the ->onofflock. + */ +static void rcu_adopt_orphan_cbs(struct rcu_state *rsp) +{ + int i; + struct rcu_data *rdp = __this_cpu_ptr(rsp->rda); + /* - * Record a quiescent state for the dying CPU. This is safe - * only because we have already cleared out the callbacks. - * (Otherwise, the RCU core might try to schedule the invocation - * of callbacks on this now-offline CPU, which would be bad.) + * If there is an rcu_barrier() operation in progress, then + * only the task doing that operation is permitted to adopt + * callbacks. To do otherwise breaks rcu_barrier() and friends + * by causing them to fail to wait for the callbacks in the + * orphanage. */ - mask = rdp->grpmask; /* rnp->grplo is constant. */ + if (rsp->rcu_barrier_in_progress && + rsp->rcu_barrier_in_progress != current) + return; + + /* Do the accounting first. */ + rdp->qlen_lazy += rsp->qlen_lazy; + rdp->qlen += rsp->qlen; + rdp->n_cbs_adopted += rsp->qlen; + rsp->qlen_lazy = 0; + rsp->qlen = 0; + + /* + * We do not need a memory barrier here because the only way we + * can get here if there is an rcu_barrier() in flight is if + * we are the task doing the rcu_barrier(). + */ + + /* First adopt the ready-to-invoke callbacks. */ + if (rsp->orphan_donelist != NULL) { + *rsp->orphan_donetail = *rdp->nxttail[RCU_DONE_TAIL]; + *rdp->nxttail[RCU_DONE_TAIL] = rsp->orphan_donelist; + for (i = RCU_NEXT_SIZE - 1; i >= RCU_DONE_TAIL; i--) + if (rdp->nxttail[i] == rdp->nxttail[RCU_DONE_TAIL]) + rdp->nxttail[i] = rsp->orphan_donetail; + rsp->orphan_donelist = NULL; + rsp->orphan_donetail = &rsp->orphan_donelist; + } + + /* And then adopt the callbacks that still need a grace period. */ + if (rsp->orphan_nxtlist != NULL) { + *rdp->nxttail[RCU_NEXT_TAIL] = rsp->orphan_nxtlist; + rdp->nxttail[RCU_NEXT_TAIL] = rsp->orphan_nxttail; + rsp->orphan_nxtlist = NULL; + rsp->orphan_nxttail = &rsp->orphan_nxtlist; + } +} + +/* + * Trace the fact that this CPU is going offline. + */ +static void rcu_cleanup_dying_cpu(struct rcu_state *rsp) +{ + RCU_TRACE(unsigned long mask); + RCU_TRACE(struct rcu_data *rdp = this_cpu_ptr(rsp->rda)); + RCU_TRACE(struct rcu_node *rnp = rdp->mynode); + + RCU_TRACE(mask = rdp->grpmask); trace_rcu_grace_period(rsp->name, rnp->gpnum + 1 - !!(rnp->qsmask & mask), "cpuofl"); - rcu_report_qs_rdp(smp_processor_id(), rsp, rdp, rsp->gpnum); - /* Note that rcu_report_qs_rdp() might call trace_rcu_grace_period(). */ } /* * The CPU has been completely removed, and some other CPU is reporting - * this fact from process context. Do the remainder of the cleanup. + * this fact from process context. Do the remainder of the cleanup, + * including orphaning the outgoing CPU's RCU callbacks, and also + * adopting them, if there is no _rcu_barrier() instance running. * There can only be one CPU hotplug operation at a time, so no other * CPU can be attempting to update rcu_cpu_kthread_task. */ @@ -1408,17 +1455,21 @@ static void rcu_cleanup_dead_cpu(int cpu, struct rcu_state *rsp) unsigned long mask; int need_report = 0; struct rcu_data *rdp = per_cpu_ptr(rsp->rda, cpu); - struct rcu_node *rnp = rdp->mynode; /* Outgoing CPU's rnp. */ + struct rcu_node *rnp = rdp->mynode; /* Outgoing CPU's rdp & rnp. */ /* Adjust any no-longer-needed kthreads. */ rcu_stop_cpu_kthread(cpu); rcu_node_kthread_setaffinity(rnp, -1); - /* Remove the dying CPU from the bitmasks in the rcu_node hierarchy. */ + /* Remove the dead CPU from the bitmasks in the rcu_node hierarchy. */ /* Exclude any attempts to start a new grace period. */ raw_spin_lock_irqsave(&rsp->onofflock, flags); + /* Orphan the dead CPU's callbacks, and adopt them if appropriate. */ + rcu_send_cbs_to_orphanage(cpu, rsp, rnp, rdp); + rcu_adopt_orphan_cbs(rsp); + /* Remove the outgoing CPU from the masks in the rcu_node hierarchy. */ mask = rdp->grpmask; /* rnp->grplo is constant. */ do { @@ -1455,6 +1506,10 @@ static void rcu_cleanup_dead_cpu(int cpu, struct rcu_state *rsp) #else /* #ifdef CONFIG_HOTPLUG_CPU */ +static void rcu_adopt_orphan_cbs(struct rcu_state *rsp) +{ +} + static void rcu_cleanup_dying_cpu(struct rcu_state *rsp) { } @@ -1523,9 +1578,6 @@ static void rcu_do_batch(struct rcu_state *rsp, struct rcu_data *rdp) rcu_is_callbacks_kthread()); /* Update count, and requeue any remaining callbacks. */ - rdp->qlen_lazy -= count_lazy; - rdp->qlen -= count; - rdp->n_cbs_invoked += count; if (list != NULL) { *tail = rdp->nxtlist; rdp->nxtlist = list; @@ -1535,6 +1587,10 @@ static void rcu_do_batch(struct rcu_state *rsp, struct rcu_data *rdp) else break; } + smp_mb(); /* List handling before counting for rcu_barrier(). */ + rdp->qlen_lazy -= count_lazy; + rdp->qlen -= count; + rdp->n_cbs_invoked += count; /* Reinstate batch limit if we have worked down the excess. */ if (rdp->blimit == LONG_MAX && rdp->qlen <= qlowmark) @@ -1823,11 +1879,14 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu), rdp = this_cpu_ptr(rsp->rda); /* Add the callback to our list. */ - *rdp->nxttail[RCU_NEXT_TAIL] = head; - rdp->nxttail[RCU_NEXT_TAIL] = &head->next; rdp->qlen++; if (lazy) rdp->qlen_lazy++; + else + rcu_idle_count_callbacks_posted(); + smp_mb(); /* Count before adding callback for rcu_barrier(). */ + *rdp->nxttail[RCU_NEXT_TAIL] = head; + rdp->nxttail[RCU_NEXT_TAIL] = &head->next; if (__is_kfree_rcu_offset((unsigned long)func)) trace_rcu_kfree_callback(rsp->name, head, (unsigned long)func, @@ -1893,6 +1952,38 @@ void call_rcu_bh(struct rcu_head *head, void (*func)(struct rcu_head *rcu)) } EXPORT_SYMBOL_GPL(call_rcu_bh); +/* + * Because a context switch is a grace period for RCU-sched and RCU-bh, + * any blocking grace-period wait automatically implies a grace period + * if there is only one CPU online at any point time during execution + * of either synchronize_sched() or synchronize_rcu_bh(). It is OK to + * occasionally incorrectly indicate that there are multiple CPUs online + * when there was in fact only one the whole time, as this just adds + * some overhead: RCU still operates correctly. + * + * Of course, sampling num_online_cpus() with preemption enabled can + * give erroneous results if there are concurrent CPU-hotplug operations. + * For example, given a demonic sequence of preemptions in num_online_cpus() + * and CPU-hotplug operations, there could be two or more CPUs online at + * all times, but num_online_cpus() might well return one (or even zero). + * + * However, all such demonic sequences require at least one CPU-offline + * operation. Furthermore, rcu_blocking_is_gp() giving the wrong answer + * is only a problem if there is an RCU read-side critical section executing + * throughout. But RCU-sched and RCU-bh read-side critical sections + * disable either preemption or bh, which prevents a CPU from going offline. + * Therefore, the only way that rcu_blocking_is_gp() can incorrectly return + * that there is only one CPU when in fact there was more than one throughout + * is when there were no RCU readers in the system. If there are no + * RCU readers, the grace period by definition can be of zero length, + * regardless of the number of online CPUs. + */ +static inline int rcu_blocking_is_gp(void) +{ + might_sleep(); /* Check for RCU read-side critical section. */ + return num_online_cpus() <= 1; +} + /** * synchronize_sched - wait until an rcu-sched grace period has elapsed. * @@ -2166,11 +2257,10 @@ static int rcu_cpu_has_callbacks(int cpu) rcu_preempt_cpu_has_callbacks(cpu); } -static DEFINE_PER_CPU(struct rcu_head, rcu_barrier_head) = {NULL}; -static atomic_t rcu_barrier_cpu_count; -static DEFINE_MUTEX(rcu_barrier_mutex); -static struct completion rcu_barrier_completion; - +/* + * RCU callback function for _rcu_barrier(). If we are last, wake + * up the task executing _rcu_barrier(). + */ static void rcu_barrier_callback(struct rcu_head *notused) { if (atomic_dec_and_test(&rcu_barrier_cpu_count)) @@ -2200,27 +2290,94 @@ static void _rcu_barrier(struct rcu_state *rsp, void (*call_rcu_func)(struct rcu_head *head, void (*func)(struct rcu_head *head))) { - BUG_ON(in_interrupt()); + int cpu; + unsigned long flags; + struct rcu_data *rdp; + struct rcu_head rh; + + init_rcu_head_on_stack(&rh); + /* Take mutex to serialize concurrent rcu_barrier() requests. */ mutex_lock(&rcu_barrier_mutex); - init_completion(&rcu_barrier_completion); + + smp_mb(); /* Prevent any prior operations from leaking in. */ + /* - * Initialize rcu_barrier_cpu_count to 1, then invoke - * rcu_barrier_func() on each CPU, so that each CPU also has - * incremented rcu_barrier_cpu_count. Only then is it safe to - * decrement rcu_barrier_cpu_count -- otherwise the first CPU - * might complete its grace period before all of the other CPUs - * did their increment, causing this function to return too - * early. Note that on_each_cpu() disables irqs, which prevents - * any CPUs from coming online or going offline until each online - * CPU has queued its RCU-barrier callback. + * Initialize the count to one rather than to zero in order to + * avoid a too-soon return to zero in case of a short grace period + * (or preemption of this task). Also flag this task as doing + * an rcu_barrier(). This will prevent anyone else from adopting + * orphaned callbacks, which could cause otherwise failure if a + * CPU went offline and quickly came back online. To see this, + * consider the following sequence of events: + * + * 1. We cause CPU 0 to post an rcu_barrier_callback() callback. + * 2. CPU 1 goes offline, orphaning its callbacks. + * 3. CPU 0 adopts CPU 1's orphaned callbacks. + * 4. CPU 1 comes back online. + * 5. We cause CPU 1 to post an rcu_barrier_callback() callback. + * 6. Both rcu_barrier_callback() callbacks are invoked, awakening + * us -- but before CPU 1's orphaned callbacks are invoked!!! */ + init_completion(&rcu_barrier_completion); atomic_set(&rcu_barrier_cpu_count, 1); - on_each_cpu(rcu_barrier_func, (void *)call_rcu_func, 1); + raw_spin_lock_irqsave(&rsp->onofflock, flags); + rsp->rcu_barrier_in_progress = current; + raw_spin_unlock_irqrestore(&rsp->onofflock, flags); + + /* + * Force every CPU with callbacks to register a new callback + * that will tell us when all the preceding callbacks have + * been invoked. If an offline CPU has callbacks, wait for + * it to either come back online or to finish orphaning those + * callbacks. + */ + for_each_possible_cpu(cpu) { + preempt_disable(); + rdp = per_cpu_ptr(rsp->rda, cpu); + if (cpu_is_offline(cpu)) { + preempt_enable(); + while (cpu_is_offline(cpu) && ACCESS_ONCE(rdp->qlen)) + schedule_timeout_interruptible(1); + } else if (ACCESS_ONCE(rdp->qlen)) { + smp_call_function_single(cpu, rcu_barrier_func, + (void *)call_rcu_func, 1); + preempt_enable(); + } else { + preempt_enable(); + } + } + + /* + * Now that all online CPUs have rcu_barrier_callback() callbacks + * posted, we can adopt all of the orphaned callbacks and place + * an rcu_barrier_callback() callback after them. When that is done, + * we are guaranteed to have an rcu_barrier_callback() callback + * following every callback that could possibly have been + * registered before _rcu_barrier() was called. + */ + raw_spin_lock_irqsave(&rsp->onofflock, flags); + rcu_adopt_orphan_cbs(rsp); + rsp->rcu_barrier_in_progress = NULL; + raw_spin_unlock_irqrestore(&rsp->onofflock, flags); + atomic_inc(&rcu_barrier_cpu_count); + smp_mb__after_atomic_inc(); /* Ensure atomic_inc() before callback. */ + call_rcu_func(&rh, rcu_barrier_callback); + + /* + * Now that we have an rcu_barrier_callback() callback on each + * CPU, and thus each counted, remove the initial count. + */ if (atomic_dec_and_test(&rcu_barrier_cpu_count)) complete(&rcu_barrier_completion); + + /* Wait for all rcu_barrier_callback() callbacks to be invoked. */ wait_for_completion(&rcu_barrier_completion); + + /* Other rcu_barrier() invocations can now safely proceed. */ mutex_unlock(&rcu_barrier_mutex); + + destroy_rcu_head_on_stack(&rh); } /** @@ -2417,7 +2574,7 @@ static void __init rcu_init_levelspread(struct rcu_state *rsp) for (i = NUM_RCU_LVLS - 1; i > 0; i--) rsp->levelspread[i] = CONFIG_RCU_FANOUT; - rsp->levelspread[0] = RCU_FANOUT_LEAF; + rsp->levelspread[0] = CONFIG_RCU_FANOUT_LEAF; } #else /* #ifdef CONFIG_RCU_FANOUT_EXACT */ static void __init rcu_init_levelspread(struct rcu_state *rsp) diff --git a/kernel/rcutree.h b/kernel/rcutree.h index d6b70b08a01a..7f5d138dedf5 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -29,18 +29,14 @@ #include <linux/seqlock.h> /* - * Define shape of hierarchy based on NR_CPUS and CONFIG_RCU_FANOUT. + * Define shape of hierarchy based on NR_CPUS, CONFIG_RCU_FANOUT, and + * CONFIG_RCU_FANOUT_LEAF. * In theory, it should be possible to add more levels straightforwardly. * In practice, this did work well going from three levels to four. * Of course, your mileage may vary. */ #define MAX_RCU_LVLS 4 -#if CONFIG_RCU_FANOUT > 16 -#define RCU_FANOUT_LEAF 16 -#else /* #if CONFIG_RCU_FANOUT > 16 */ -#define RCU_FANOUT_LEAF (CONFIG_RCU_FANOUT) -#endif /* #else #if CONFIG_RCU_FANOUT > 16 */ -#define RCU_FANOUT_1 (RCU_FANOUT_LEAF) +#define RCU_FANOUT_1 (CONFIG_RCU_FANOUT_LEAF) #define RCU_FANOUT_2 (RCU_FANOUT_1 * CONFIG_RCU_FANOUT) #define RCU_FANOUT_3 (RCU_FANOUT_2 * CONFIG_RCU_FANOUT) #define RCU_FANOUT_4 (RCU_FANOUT_3 * CONFIG_RCU_FANOUT) @@ -371,6 +367,17 @@ struct rcu_state { raw_spinlock_t onofflock; /* exclude on/offline and */ /* starting new GP. */ + struct rcu_head *orphan_nxtlist; /* Orphaned callbacks that */ + /* need a grace period. */ + struct rcu_head **orphan_nxttail; /* Tail of above. */ + struct rcu_head *orphan_donelist; /* Orphaned callbacks that */ + /* are ready to invoke. */ + struct rcu_head **orphan_donetail; /* Tail of above. */ + long qlen_lazy; /* Number of lazy callbacks. */ + long qlen; /* Total number of callbacks. */ + struct task_struct *rcu_barrier_in_progress; + /* Task doing rcu_barrier(), */ + /* or NULL if no barrier. */ raw_spinlock_t fqslock; /* Only one task forcing */ /* quiescent states. */ unsigned long jiffies_force_qs; /* Time at which to invoke */ @@ -470,6 +477,7 @@ static void __cpuinit rcu_prepare_kthreads(int cpu); static void rcu_prepare_for_idle_init(int cpu); static void rcu_cleanup_after_idle(int cpu); static void rcu_prepare_for_idle(int cpu); +static void rcu_idle_count_callbacks_posted(void); static void print_cpu_stall_info_begin(void); static void print_cpu_stall_info(struct rcu_state *rsp, int cpu); static void print_cpu_stall_info_end(void); diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 4936fff820eb..2411000d9869 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -1914,6 +1914,14 @@ static void rcu_prepare_for_idle(int cpu) { } +/* + * Don't bother keeping a running count of the number of RCU callbacks + * posted because CONFIG_RCU_FAST_NO_HZ=n. + */ +static void rcu_idle_count_callbacks_posted(void) +{ +} + #else /* #if !defined(CONFIG_RCU_FAST_NO_HZ) */ /* @@ -1954,11 +1962,20 @@ static void rcu_prepare_for_idle(int cpu) #define RCU_IDLE_GP_DELAY 6 /* Roughly one grace period. */ #define RCU_IDLE_LAZY_GP_DELAY (6 * HZ) /* Roughly six seconds. */ +/* Loop counter for rcu_prepare_for_idle(). */ static DEFINE_PER_CPU(int, rcu_dyntick_drain); +/* If rcu_dyntick_holdoff==jiffies, don't try to enter dyntick-idle mode. */ static DEFINE_PER_CPU(unsigned long, rcu_dyntick_holdoff); -static DEFINE_PER_CPU(struct hrtimer, rcu_idle_gp_timer); -static ktime_t rcu_idle_gp_wait; /* If some non-lazy callbacks. */ -static ktime_t rcu_idle_lazy_gp_wait; /* If only lazy callbacks. */ +/* Timer to awaken the CPU if it enters dyntick-idle mode with callbacks. */ +static DEFINE_PER_CPU(struct timer_list, rcu_idle_gp_timer); +/* Scheduled expiry time for rcu_idle_gp_timer to allow reposting. */ +static DEFINE_PER_CPU(unsigned long, rcu_idle_gp_timer_expires); +/* Enable special processing on first attempt to enter dyntick-idle mode. */ +static DEFINE_PER_CPU(bool, rcu_idle_first_pass); +/* Running count of non-lazy callbacks posted, never decremented. */ +static DEFINE_PER_CPU(unsigned long, rcu_nonlazy_posted); +/* Snapshot of rcu_nonlazy_posted to detect meaningful exits from idle. */ +static DEFINE_PER_CPU(unsigned long, rcu_nonlazy_posted_snap); /* * Allow the CPU to enter dyntick-idle mode if either: (1) There are no @@ -1971,6 +1988,8 @@ static ktime_t rcu_idle_lazy_gp_wait; /* If only lazy callbacks. */ */ int rcu_needs_cpu(int cpu) { + /* Flag a new idle sojourn to the idle-entry state machine. */ + per_cpu(rcu_idle_first_pass, cpu) = 1; /* If no callbacks, RCU doesn't need the CPU. */ if (!rcu_cpu_has_callbacks(cpu)) return 0; @@ -2021,16 +2040,34 @@ static bool rcu_cpu_has_nonlazy_callbacks(int cpu) } /* + * Handler for smp_call_function_single(). The only point of this + * handler is to wake the CPU up, so the handler does only tracing. + */ +void rcu_idle_demigrate(void *unused) +{ + trace_rcu_prep_idle("Demigrate"); +} + +/* * Timer handler used to force CPU to start pushing its remaining RCU * callbacks in the case where it entered dyntick-idle mode with callbacks * pending. The hander doesn't really need to do anything because the * real work is done upon re-entry to idle, or by the next scheduling-clock * interrupt should idle not be re-entered. + * + * One special case: the timer gets migrated without awakening the CPU + * on which the timer was scheduled on. In this case, we must wake up + * that CPU. We do so with smp_call_function_single(). */ -static enum hrtimer_restart rcu_idle_gp_timer_func(struct hrtimer *hrtp) +static void rcu_idle_gp_timer_func(unsigned long cpu_in) { + int cpu = (int)cpu_in; + trace_rcu_prep_idle("Timer"); - return HRTIMER_NORESTART; + if (cpu != smp_processor_id()) + smp_call_function_single(cpu, rcu_idle_demigrate, NULL, 0); + else + WARN_ON_ONCE(1); /* Getting here can hang the system... */ } /* @@ -2038,19 +2075,11 @@ static enum hrtimer_restart rcu_idle_gp_timer_func(struct hrtimer *hrtp) */ static void rcu_prepare_for_idle_init(int cpu) { - static int firsttime = 1; - struct hrtimer *hrtp = &per_cpu(rcu_idle_gp_timer, cpu); - - hrtimer_init(hrtp, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - hrtp->function = rcu_idle_gp_timer_func; - if (firsttime) { - unsigned int upj = jiffies_to_usecs(RCU_IDLE_GP_DELAY); - - rcu_idle_gp_wait = ns_to_ktime(upj * (u64)1000); - upj = jiffies_to_usecs(RCU_IDLE_LAZY_GP_DELAY); - rcu_idle_lazy_gp_wait = ns_to_ktime(upj * (u64)1000); - firsttime = 0; - } + per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1; + setup_timer(&per_cpu(rcu_idle_gp_timer, cpu), + rcu_idle_gp_timer_func, cpu); + per_cpu(rcu_idle_gp_timer_expires, cpu) = jiffies - 1; + per_cpu(rcu_idle_first_pass, cpu) = 1; } /* @@ -2060,7 +2089,8 @@ static void rcu_prepare_for_idle_init(int cpu) */ static void rcu_cleanup_after_idle(int cpu) { - hrtimer_cancel(&per_cpu(rcu_idle_gp_timer, cpu)); + del_timer(&per_cpu(rcu_idle_gp_timer, cpu)); + trace_rcu_prep_idle("Cleanup after idle"); } /* @@ -2084,6 +2114,29 @@ static void rcu_cleanup_after_idle(int cpu) */ static void rcu_prepare_for_idle(int cpu) { + struct timer_list *tp; + + /* + * If this is an idle re-entry, for example, due to use of + * RCU_NONIDLE() or the new idle-loop tracing API within the idle + * loop, then don't take any state-machine actions, unless the + * momentary exit from idle queued additional non-lazy callbacks. + * Instead, repost the rcu_idle_gp_timer if this CPU has callbacks + * pending. + */ + if (!per_cpu(rcu_idle_first_pass, cpu) && + (per_cpu(rcu_nonlazy_posted, cpu) == + per_cpu(rcu_nonlazy_posted_snap, cpu))) { + if (rcu_cpu_has_callbacks(cpu)) { + tp = &per_cpu(rcu_idle_gp_timer, cpu); + mod_timer_pinned(tp, per_cpu(rcu_idle_gp_timer_expires, cpu)); + } + return; + } + per_cpu(rcu_idle_first_pass, cpu) = 0; + per_cpu(rcu_nonlazy_posted_snap, cpu) = + per_cpu(rcu_nonlazy_posted, cpu) - 1; + /* * If there are no callbacks on this CPU, enter dyntick-idle mode. * Also reset state to avoid prejudicing later attempts. @@ -2116,11 +2169,15 @@ static void rcu_prepare_for_idle(int cpu) per_cpu(rcu_dyntick_drain, cpu) = 0; per_cpu(rcu_dyntick_holdoff, cpu) = jiffies; if (rcu_cpu_has_nonlazy_callbacks(cpu)) - hrtimer_start(&per_cpu(rcu_idle_gp_timer, cpu), - rcu_idle_gp_wait, HRTIMER_MODE_REL); + per_cpu(rcu_idle_gp_timer_expires, cpu) = + jiffies + RCU_IDLE_GP_DELAY; else - hrtimer_start(&per_cpu(rcu_idle_gp_timer, cpu), - rcu_idle_lazy_gp_wait, HRTIMER_MODE_REL); + per_cpu(rcu_idle_gp_timer_expires, cpu) = + jiffies + RCU_IDLE_LAZY_GP_DELAY; + tp = &per_cpu(rcu_idle_gp_timer, cpu); + mod_timer_pinned(tp, per_cpu(rcu_idle_gp_timer_expires, cpu)); + per_cpu(rcu_nonlazy_posted_snap, cpu) = + per_cpu(rcu_nonlazy_posted, cpu); return; /* Nothing more to do immediately. */ } else if (--per_cpu(rcu_dyntick_drain, cpu) <= 0) { /* We have hit the limit, so time to give up. */ @@ -2160,6 +2217,19 @@ static void rcu_prepare_for_idle(int cpu) trace_rcu_prep_idle("Callbacks drained"); } +/* + * Keep a running count of the number of non-lazy callbacks posted + * on this CPU. This running counter (which is never decremented) allows + * rcu_prepare_for_idle() to detect when something out of the idle loop + * posts a callback, even if an equal number of callbacks are invoked. + * Of course, callbacks should only be posted from within a trace event + * designed to be called from idle or from within RCU_NONIDLE(). + */ +static void rcu_idle_count_callbacks_posted(void) +{ + __this_cpu_add(rcu_nonlazy_posted, 1); +} + #endif /* #else #if !defined(CONFIG_RCU_FAST_NO_HZ) */ #ifdef CONFIG_RCU_CPU_STALL_INFO @@ -2168,14 +2238,12 @@ static void rcu_prepare_for_idle(int cpu) static void print_cpu_stall_fast_no_hz(char *cp, int cpu) { - struct hrtimer *hrtp = &per_cpu(rcu_idle_gp_timer, cpu); + struct timer_list *tltp = &per_cpu(rcu_idle_gp_timer, cpu); - sprintf(cp, "drain=%d %c timer=%lld", + sprintf(cp, "drain=%d %c timer=%lu", per_cpu(rcu_dyntick_drain, cpu), per_cpu(rcu_dyntick_holdoff, cpu) == jiffies ? 'H' : '.', - hrtimer_active(hrtp) - ? ktime_to_us(hrtimer_get_remaining(hrtp)) - : -1); + timer_pending(tltp) ? tltp->expires - jiffies : -1); } #else /* #ifdef CONFIG_RCU_FAST_NO_HZ */ diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c index ed459edeff43..d4bc16ddd1d4 100644 --- a/kernel/rcutree_trace.c +++ b/kernel/rcutree_trace.c @@ -271,13 +271,13 @@ static void print_one_rcu_state(struct seq_file *m, struct rcu_state *rsp) gpnum = rsp->gpnum; seq_printf(m, "c=%lu g=%lu s=%d jfq=%ld j=%x " - "nfqs=%lu/nfqsng=%lu(%lu) fqlh=%lu\n", + "nfqs=%lu/nfqsng=%lu(%lu) fqlh=%lu oqlen=%ld/%ld\n", rsp->completed, gpnum, rsp->fqs_state, (long)(rsp->jiffies_force_qs - jiffies), (int)(jiffies & 0xffff), rsp->n_force_qs, rsp->n_force_qs_ngp, rsp->n_force_qs - rsp->n_force_qs_ngp, - rsp->n_force_qs_lh); + rsp->n_force_qs_lh, rsp->qlen_lazy, rsp->qlen); for (rnp = &rsp->node[0]; rnp - &rsp->node[0] < NUM_RCU_NODES; rnp++) { if (rnp->level != level) { seq_puts(m, "\n"); diff --git a/kernel/srcu.c b/kernel/srcu.c index ba35f3a4a1f4..2095be3318d5 100644 --- a/kernel/srcu.c +++ b/kernel/srcu.c @@ -34,10 +34,77 @@ #include <linux/delay.h> #include <linux/srcu.h> +/* + * Initialize an rcu_batch structure to empty. + */ +static inline void rcu_batch_init(struct rcu_batch *b) +{ + b->head = NULL; + b->tail = &b->head; +} + +/* + * Enqueue a callback onto the tail of the specified rcu_batch structure. + */ +static inline void rcu_batch_queue(struct rcu_batch *b, struct rcu_head *head) +{ + *b->tail = head; + b->tail = &head->next; +} + +/* + * Is the specified rcu_batch structure empty? + */ +static inline bool rcu_batch_empty(struct rcu_batch *b) +{ + return b->tail == &b->head; +} + +/* + * Remove the callback at the head of the specified rcu_batch structure + * and return a pointer to it, or return NULL if the structure is empty. + */ +static inline struct rcu_head *rcu_batch_dequeue(struct rcu_batch *b) +{ + struct rcu_head *head; + + if (rcu_batch_empty(b)) + return NULL; + + head = b->head; + b->head = head->next; + if (b->tail == &head->next) + rcu_batch_init(b); + + return head; +} + +/* + * Move all callbacks from the rcu_batch structure specified by "from" to + * the structure specified by "to". + */ +static inline void rcu_batch_move(struct rcu_batch *to, struct rcu_batch *from) +{ + if (!rcu_batch_empty(from)) { + *to->tail = from->head; + to->tail = from->tail; + rcu_batch_init(from); + } +} + +/* single-thread state-machine */ +static void process_srcu(struct work_struct *work); + static int init_srcu_struct_fields(struct srcu_struct *sp) { sp->completed = 0; - mutex_init(&sp->mutex); + spin_lock_init(&sp->queue_lock); + sp->running = false; + rcu_batch_init(&sp->batch_queue); + rcu_batch_init(&sp->batch_check0); + rcu_batch_init(&sp->batch_check1); + rcu_batch_init(&sp->batch_done); + INIT_DELAYED_WORK(&sp->work, process_srcu); sp->per_cpu_ref = alloc_percpu(struct srcu_struct_array); return sp->per_cpu_ref ? 0 : -ENOMEM; } @@ -73,21 +140,116 @@ EXPORT_SYMBOL_GPL(init_srcu_struct); #endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */ /* - * srcu_readers_active_idx -- returns approximate number of readers - * active on the specified rank of per-CPU counters. + * Returns approximate total of the readers' ->seq[] values for the + * rank of per-CPU counters specified by idx. */ +static unsigned long srcu_readers_seq_idx(struct srcu_struct *sp, int idx) +{ + int cpu; + unsigned long sum = 0; + unsigned long t; -static int srcu_readers_active_idx(struct srcu_struct *sp, int idx) + for_each_possible_cpu(cpu) { + t = ACCESS_ONCE(per_cpu_ptr(sp->per_cpu_ref, cpu)->seq[idx]); + sum += t; + } + return sum; +} + +/* + * Returns approximate number of readers active on the specified rank + * of the per-CPU ->c[] counters. + */ +static unsigned long srcu_readers_active_idx(struct srcu_struct *sp, int idx) { int cpu; - int sum; + unsigned long sum = 0; + unsigned long t; - sum = 0; - for_each_possible_cpu(cpu) - sum += per_cpu_ptr(sp->per_cpu_ref, cpu)->c[idx]; + for_each_possible_cpu(cpu) { + t = ACCESS_ONCE(per_cpu_ptr(sp->per_cpu_ref, cpu)->c[idx]); + sum += t; + } return sum; } +/* + * Return true if the number of pre-existing readers is determined to + * be stably zero. An example unstable zero can occur if the call + * to srcu_readers_active_idx() misses an __srcu_read_lock() increment, + * but due to task migration, sees the corresponding __srcu_read_unlock() + * decrement. This can happen because srcu_readers_active_idx() takes + * time to sum the array, and might in fact be interrupted or preempted + * partway through the summation. + */ +static bool srcu_readers_active_idx_check(struct srcu_struct *sp, int idx) +{ + unsigned long seq; + + seq = srcu_readers_seq_idx(sp, idx); + + /* + * The following smp_mb() A pairs with the smp_mb() B located in + * __srcu_read_lock(). This pairing ensures that if an + * __srcu_read_lock() increments its counter after the summation + * in srcu_readers_active_idx(), then the corresponding SRCU read-side + * critical section will see any changes made prior to the start + * of the current SRCU grace period. + * + * Also, if the above call to srcu_readers_seq_idx() saw the + * increment of ->seq[], then the call to srcu_readers_active_idx() + * must see the increment of ->c[]. + */ + smp_mb(); /* A */ + + /* + * Note that srcu_readers_active_idx() can incorrectly return + * zero even though there is a pre-existing reader throughout. + * To see this, suppose that task A is in a very long SRCU + * read-side critical section that started on CPU 0, and that + * no other reader exists, so that the sum of the counters + * is equal to one. Then suppose that task B starts executing + * srcu_readers_active_idx(), summing up to CPU 1, and then that + * task C starts reading on CPU 0, so that its increment is not + * summed, but finishes reading on CPU 2, so that its decrement + * -is- summed. Then when task B completes its sum, it will + * incorrectly get zero, despite the fact that task A has been + * in its SRCU read-side critical section the whole time. + * + * We therefore do a validation step should srcu_readers_active_idx() + * return zero. + */ + if (srcu_readers_active_idx(sp, idx) != 0) + return false; + + /* + * The remainder of this function is the validation step. + * The following smp_mb() D pairs with the smp_mb() C in + * __srcu_read_unlock(). If the __srcu_read_unlock() was seen + * by srcu_readers_active_idx() above, then any destructive + * operation performed after the grace period will happen after + * the corresponding SRCU read-side critical section. + * + * Note that there can be at most NR_CPUS worth of readers using + * the old index, which is not enough to overflow even a 32-bit + * integer. (Yes, this does mean that systems having more than + * a billion or so CPUs need to be 64-bit systems.) Therefore, + * the sum of the ->seq[] counters cannot possibly overflow. + * Therefore, the only way that the return values of the two + * calls to srcu_readers_seq_idx() can be equal is if there were + * no increments of the corresponding rank of ->seq[] counts + * in the interim. But the missed-increment scenario laid out + * above includes an increment of the ->seq[] counter by + * the corresponding __srcu_read_lock(). Therefore, if this + * scenario occurs, the return values from the two calls to + * srcu_readers_seq_idx() will differ, and thus the validation + * step below suffices. + */ + smp_mb(); /* D */ + + return srcu_readers_seq_idx(sp, idx) == seq; +} + /** * srcu_readers_active - returns approximate number of readers. * @sp: which srcu_struct to count active readers (holding srcu_read_lock). @@ -98,7 +260,14 @@ static int srcu_readers_active_idx(struct srcu_struct *sp, int idx) */ static int srcu_readers_active(struct srcu_struct *sp) { - return srcu_readers_active_idx(sp, 0) + srcu_readers_active_idx(sp, 1); + int cpu; + unsigned long sum = 0; + + for_each_possible_cpu(cpu) { + sum += ACCESS_ONCE(per_cpu_ptr(sp->per_cpu_ref, cpu)->c[0]); + sum += ACCESS_ONCE(per_cpu_ptr(sp->per_cpu_ref, cpu)->c[1]); + } + return sum; } /** @@ -131,10 +300,11 @@ int __srcu_read_lock(struct srcu_struct *sp) int idx; preempt_disable(); - idx = sp->completed & 0x1; - barrier(); /* ensure compiler looks -once- at sp->completed. */ - per_cpu_ptr(sp->per_cpu_ref, smp_processor_id())->c[idx]++; - srcu_barrier(); /* ensure compiler won't misorder critical section. */ + idx = rcu_dereference_index_check(sp->completed, + rcu_read_lock_sched_held()) & 0x1; + ACCESS_ONCE(this_cpu_ptr(sp->per_cpu_ref)->c[idx]) += 1; + smp_mb(); /* B */ /* Avoid leaking the critical section. */ + ACCESS_ONCE(this_cpu_ptr(sp->per_cpu_ref)->seq[idx]) += 1; preempt_enable(); return idx; } @@ -149,8 +319,8 @@ EXPORT_SYMBOL_GPL(__srcu_read_lock); void __srcu_read_unlock(struct srcu_struct *sp, int idx) { preempt_disable(); - srcu_barrier(); /* ensure compiler won't misorder critical section. */ - per_cpu_ptr(sp->per_cpu_ref, smp_processor_id())->c[idx]--; + smp_mb(); /* C */ /* Avoid leaking the critical section. */ + ACCESS_ONCE(this_cpu_ptr(sp->per_cpu_ref)->c[idx]) -= 1; preempt_enable(); } EXPORT_SYMBOL_GPL(__srcu_read_unlock); @@ -163,106 +333,119 @@ EXPORT_SYMBOL_GPL(__srcu_read_unlock); * we repeatedly block for 1-millisecond time periods. This approach * has done well in testing, so there is no need for a config parameter. */ -#define SYNCHRONIZE_SRCU_READER_DELAY 10 +#define SRCU_RETRY_CHECK_DELAY 5 +#define SYNCHRONIZE_SRCU_TRYCOUNT 2 +#define SYNCHRONIZE_SRCU_EXP_TRYCOUNT 12 /* - * Helper function for synchronize_srcu() and synchronize_srcu_expedited(). + * @@@ Wait until all pre-existing readers complete. Such readers + * will have used the index specified by "idx". + * the caller should ensures the ->completed is not changed while checking + * and idx = (->completed & 1) ^ 1 */ -static void __synchronize_srcu(struct srcu_struct *sp, void (*sync_func)(void)) +static bool try_check_zero(struct srcu_struct *sp, int idx, int trycount) { - int idx; - - rcu_lockdep_assert(!lock_is_held(&sp->dep_map) && - !lock_is_held(&rcu_bh_lock_map) && - !lock_is_held(&rcu_lock_map) && - !lock_is_held(&rcu_sched_lock_map), - "Illegal synchronize_srcu() in same-type SRCU (or RCU) read-side critical section"); - - idx = sp->completed; - mutex_lock(&sp->mutex); + for (;;) { + if (srcu_readers_active_idx_check(sp, idx)) + return true; + if (--trycount <= 0) + return false; + udelay(SRCU_RETRY_CHECK_DELAY); + } +} - /* - * Check to see if someone else did the work for us while we were - * waiting to acquire the lock. We need -two- advances of - * the counter, not just one. If there was but one, we might have - * shown up -after- our helper's first synchronize_sched(), thus - * having failed to prevent CPU-reordering races with concurrent - * srcu_read_unlock()s on other CPUs (see comment below). So we - * either (1) wait for two or (2) supply the second ourselves. - */ +/* + * Increment the ->completed counter so that future SRCU readers will + * use the other rank of the ->c[] and ->seq[] arrays. This allows + * us to wait for pre-existing readers in a starvation-free manner. + */ +static void srcu_flip(struct srcu_struct *sp) +{ + sp->completed++; +} - if ((sp->completed - idx) >= 2) { - mutex_unlock(&sp->mutex); - return; +/* + * Enqueue an SRCU callback on the specified srcu_struct structure, + * initiating grace-period processing if it is not already running. + */ +void call_srcu(struct srcu_struct *sp, struct rcu_head *head, + void (*func)(struct rcu_head *head)) +{ + unsigned long flags; + + head->next = NULL; + head->func = func; + spin_lock_irqsave(&sp->queue_lock, flags); + rcu_batch_queue(&sp->batch_queue, head); + if (!sp->running) { + sp->running = true; + queue_delayed_work(system_nrt_wq, &sp->work, 0); } + spin_unlock_irqrestore(&sp->queue_lock, flags); +} +EXPORT_SYMBOL_GPL(call_srcu); - sync_func(); /* Force memory barrier on all CPUs. */ +struct rcu_synchronize { + struct rcu_head head; + struct completion completion; +}; - /* - * The preceding synchronize_sched() ensures that any CPU that - * sees the new value of sp->completed will also see any preceding - * changes to data structures made by this CPU. This prevents - * some other CPU from reordering the accesses in its SRCU - * read-side critical section to precede the corresponding - * srcu_read_lock() -- ensuring that such references will in - * fact be protected. - * - * So it is now safe to do the flip. - */ +/* + * Awaken the corresponding synchronize_srcu() instance now that a + * grace period has elapsed. + */ +static void wakeme_after_rcu(struct rcu_head *head) +{ + struct rcu_synchronize *rcu; - idx = sp->completed & 0x1; - sp->completed++; + rcu = container_of(head, struct rcu_synchronize, head); + complete(&rcu->completion); +} - sync_func(); /* Force memory barrier on all CPUs. */ +static void srcu_advance_batches(struct srcu_struct *sp, int trycount); +static void srcu_reschedule(struct srcu_struct *sp); - /* - * At this point, because of the preceding synchronize_sched(), - * all srcu_read_lock() calls using the old counters have completed. - * Their corresponding critical sections might well be still - * executing, but the srcu_read_lock() primitives themselves - * will have finished executing. We initially give readers - * an arbitrarily chosen 10 microseconds to get out of their - * SRCU read-side critical sections, then loop waiting 1/HZ - * seconds per iteration. The 10-microsecond value has done - * very well in testing. - */ - - if (srcu_readers_active_idx(sp, idx)) - udelay(SYNCHRONIZE_SRCU_READER_DELAY); - while (srcu_readers_active_idx(sp, idx)) - schedule_timeout_interruptible(1); +/* + * Helper function for synchronize_srcu() and synchronize_srcu_expedited(). + */ +static void __synchronize_srcu(struct srcu_struct *sp, int trycount) +{ + struct rcu_synchronize rcu; + struct rcu_head *head = &rcu.head; + bool done = false; - sync_func(); /* Force memory barrier on all CPUs. */ + rcu_lockdep_assert(!lock_is_held(&sp->dep_map) && + !lock_is_held(&rcu_bh_lock_map) && + !lock_is_held(&rcu_lock_map) && + !lock_is_held(&rcu_sched_lock_map), + "Illegal synchronize_srcu() in same-type SRCU (or RCU) read-side critical section"); - /* - * The preceding synchronize_sched() forces all srcu_read_unlock() - * primitives that were executing concurrently with the preceding - * for_each_possible_cpu() loop to have completed by this point. - * More importantly, it also forces the corresponding SRCU read-side - * critical sections to have also completed, and the corresponding - * references to SRCU-protected data items to be dropped. - * - * Note: - * - * Despite what you might think at first glance, the - * preceding synchronize_sched() -must- be within the - * critical section ended by the following mutex_unlock(). - * Otherwise, a task taking the early exit can race - * with a srcu_read_unlock(), which might have executed - * just before the preceding srcu_readers_active() check, - * and whose CPU might have reordered the srcu_read_unlock() - * with the preceding critical section. In this case, there - * is nothing preventing the synchronize_sched() task that is - * taking the early exit from freeing a data structure that - * is still being referenced (out of order) by the task - * doing the srcu_read_unlock(). - * - * Alternatively, the comparison with "2" on the early exit - * could be changed to "3", but this increases synchronize_srcu() - * latency for bulk loads. So the current code is preferred. - */ + init_completion(&rcu.completion); + + head->next = NULL; + head->func = wakeme_after_rcu; + spin_lock_irq(&sp->queue_lock); + if (!sp->running) { + /* steal the processing owner */ + sp->running = true; + rcu_batch_queue(&sp->batch_check0, head); + spin_unlock_irq(&sp->queue_lock); + + srcu_advance_batches(sp, trycount); + if (!rcu_batch_empty(&sp->batch_done)) { + BUG_ON(sp->batch_done.head != head); + rcu_batch_dequeue(&sp->batch_done); + done = true; + } + /* give the processing owner to work_struct */ + srcu_reschedule(sp); + } else { + rcu_batch_queue(&sp->batch_queue, head); + spin_unlock_irq(&sp->queue_lock); + } - mutex_unlock(&sp->mutex); + if (!done) + wait_for_completion(&rcu.completion); } /** @@ -281,7 +464,7 @@ static void __synchronize_srcu(struct srcu_struct *sp, void (*sync_func)(void)) */ void synchronize_srcu(struct srcu_struct *sp) { - __synchronize_srcu(sp, synchronize_sched); + __synchronize_srcu(sp, SYNCHRONIZE_SRCU_TRYCOUNT); } EXPORT_SYMBOL_GPL(synchronize_srcu); @@ -289,18 +472,11 @@ EXPORT_SYMBOL_GPL(synchronize_srcu); * synchronize_srcu_expedited - Brute-force SRCU grace period * @sp: srcu_struct with which to synchronize. * - * Wait for an SRCU grace period to elapse, but use a "big hammer" - * approach to force the grace period to end quickly. This consumes - * significant time on all CPUs and is unfriendly to real-time workloads, - * so is thus not recommended for any sort of common-case code. In fact, - * if you are using synchronize_srcu_expedited() in a loop, please - * restructure your code to batch your updates, and then use a single - * synchronize_srcu() instead. + * Wait for an SRCU grace period to elapse, but be more aggressive about + * spinning rather than blocking when waiting. * * Note that it is illegal to call this function while holding any lock - * that is acquired by a CPU-hotplug notifier. And yes, it is also illegal - * to call this function from a CPU-hotplug notifier. Failing to observe - * these restriction will result in deadlock. It is also illegal to call + * that is acquired by a CPU-hotplug notifier. It is also illegal to call * synchronize_srcu_expedited() from the corresponding SRCU read-side * critical section; doing so will result in deadlock. However, it is * perfectly legal to call synchronize_srcu_expedited() on one srcu_struct @@ -309,20 +485,166 @@ EXPORT_SYMBOL_GPL(synchronize_srcu); */ void synchronize_srcu_expedited(struct srcu_struct *sp) { - __synchronize_srcu(sp, synchronize_sched_expedited); + __synchronize_srcu(sp, SYNCHRONIZE_SRCU_EXP_TRYCOUNT); } EXPORT_SYMBOL_GPL(synchronize_srcu_expedited); /** + * srcu_barrier - Wait until all in-flight call_srcu() callbacks complete. + */ +void srcu_barrier(struct srcu_struct *sp) +{ + synchronize_srcu(sp); +} +EXPORT_SYMBOL_GPL(srcu_barrier); + +/** * srcu_batches_completed - return batches completed. * @sp: srcu_struct on which to report batch completion. * * Report the number of batches, correlated with, but not necessarily * precisely the same as, the number of grace periods that have elapsed. */ - long srcu_batches_completed(struct srcu_struct *sp) { return sp->completed; } EXPORT_SYMBOL_GPL(srcu_batches_completed); + +#define SRCU_CALLBACK_BATCH 10 +#define SRCU_INTERVAL 1 + +/* + * Move any new SRCU callbacks to the first stage of the SRCU grace + * period pipeline. + */ +static void srcu_collect_new(struct srcu_struct *sp) +{ + if (!rcu_batch_empty(&sp->batch_queue)) { + spin_lock_irq(&sp->queue_lock); + rcu_batch_move(&sp->batch_check0, &sp->batch_queue); + spin_unlock_irq(&sp->queue_lock); + } +} + +/* + * Core SRCU state machine. Advance callbacks from ->batch_check0 to + * ->batch_check1 and then to ->batch_done as readers drain. + */ +static void srcu_advance_batches(struct srcu_struct *sp, int trycount) +{ + int idx = 1 ^ (sp->completed & 1); + + /* + * Because readers might be delayed for an extended period after + * fetching ->completed for their index, at any point in time there + * might well be readers using both idx=0 and idx=1. We therefore + * need to wait for readers to clear from both index values before + * invoking a callback. + */ + + if (rcu_batch_empty(&sp->batch_check0) && + rcu_batch_empty(&sp->batch_check1)) + return; /* no callbacks need to be advanced */ + + if (!try_check_zero(sp, idx, trycount)) + return; /* failed to advance, will try after SRCU_INTERVAL */ + + /* + * The callbacks in ->batch_check1 have already done with their + * first zero check and flip back when they were enqueued on + * ->batch_check0 in a previous invocation of srcu_advance_batches(). + * (Presumably try_check_zero() returned false during that + * invocation, leaving the callbacks stranded on ->batch_check1.) + * They are therefore ready to invoke, so move them to ->batch_done. + */ + rcu_batch_move(&sp->batch_done, &sp->batch_check1); + + if (rcu_batch_empty(&sp->batch_check0)) + return; /* no callbacks need to be advanced */ + srcu_flip(sp); + + /* + * The callbacks in ->batch_check0 just finished their + * first check zero and flip, so move them to ->batch_check1 + * for future checking on the other idx. + */ + rcu_batch_move(&sp->batch_check1, &sp->batch_check0); + + /* + * SRCU read-side critical sections are normally short, so check + * at least twice in quick succession after a flip. + */ + trycount = trycount < 2 ? 2 : trycount; + if (!try_check_zero(sp, idx^1, trycount)) + return; /* failed to advance, will try after SRCU_INTERVAL */ + + /* + * The callbacks in ->batch_check1 have now waited for all + * pre-existing readers using both idx values. They are therefore + * ready to invoke, so move them to ->batch_done. + */ + rcu_batch_move(&sp->batch_done, &sp->batch_check1); +} + +/* + * Invoke a limited number of SRCU callbacks that have passed through + * their grace period. If there are more to do, SRCU will reschedule + * the workqueue. + */ +static void srcu_invoke_callbacks(struct srcu_struct *sp) +{ + int i; + struct rcu_head *head; + + for (i = 0; i < SRCU_CALLBACK_BATCH; i++) { + head = rcu_batch_dequeue(&sp->batch_done); + if (!head) + break; + local_bh_disable(); + head->func(head); + local_bh_enable(); + } +} + +/* + * Finished one round of SRCU grace period. Start another if there are + * more SRCU callbacks queued, otherwise put SRCU into not-running state. + */ +static void srcu_reschedule(struct srcu_struct *sp) +{ + bool pending = true; + + if (rcu_batch_empty(&sp->batch_done) && + rcu_batch_empty(&sp->batch_check1) && + rcu_batch_empty(&sp->batch_check0) && + rcu_batch_empty(&sp->batch_queue)) { + spin_lock_irq(&sp->queue_lock); + if (rcu_batch_empty(&sp->batch_done) && + rcu_batch_empty(&sp->batch_check1) && + rcu_batch_empty(&sp->batch_check0) && + rcu_batch_empty(&sp->batch_queue)) { + sp->running = false; + pending = false; + } + spin_unlock_irq(&sp->queue_lock); + } + + if (pending) + queue_delayed_work(system_nrt_wq, &sp->work, SRCU_INTERVAL); +} + +/* + * This is the work-queue function that handles SRCU grace periods. + */ +static void process_srcu(struct work_struct *work) +{ + struct srcu_struct *sp; + + sp = container_of(work, struct srcu_struct, work.work); + + srcu_collect_new(sp); + srcu_advance_batches(sp, 1); + srcu_invoke_callbacks(sp); + srcu_reschedule(sp); +} diff --git a/kernel/timer.c b/kernel/timer.c index a297ffcf888e..837c552fe838 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -861,7 +861,13 @@ EXPORT_SYMBOL(mod_timer); * * mod_timer_pinned() is a way to update the expire field of an * active timer (if the timer is inactive it will be activated) - * and not allow the timer to be migrated to a different CPU. + * and to ensure that the timer is scheduled on the current CPU. + * + * Note that this does not prevent the timer from being migrated + * when the current CPU goes offline. If this is a problem for + * you, use CPU-hotplug notifiers to handle it correctly, for + * example, cancelling the timer when the corresponding CPU goes + * offline. * * mod_timer_pinned(timer, expires) is equivalent to: * diff --git a/lib/list_debug.c b/lib/list_debug.c index 982b850d4e7a..3810b481f940 100644 --- a/lib/list_debug.c +++ b/lib/list_debug.c @@ -10,6 +10,7 @@ #include <linux/list.h> #include <linux/bug.h> #include <linux/kernel.h> +#include <linux/rculist.h> /* * Insert a new entry between two known consecutive entries. @@ -75,3 +76,24 @@ void list_del(struct list_head *entry) entry->prev = LIST_POISON2; } EXPORT_SYMBOL(list_del); + +/* + * RCU variants. + */ +void __list_add_rcu(struct list_head *new, + struct list_head *prev, struct list_head *next) +{ + WARN(next->prev != prev, + "list_add_rcu corruption. next->prev should be " + "prev (%p), but was %p. (next=%p).\n", + prev, next->prev, next); + WARN(prev->next != next, + "list_add_rcu corruption. prev->next should be " + "next (%p), but was %p. (prev=%p).\n", + next, prev->next, prev); + new->next = next; + new->prev = prev; + rcu_assign_pointer(list_next_rcu(prev), new); + next->prev = new; +} +EXPORT_SYMBOL(__list_add_rcu); |