summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-s3c64xx/sleep.S63
-rw-r--r--arch/arm/mach-s5pv210/sleep.S105
-rw-r--r--arch/arm/plat-s3c24xx/sleep.S57
-rw-r--r--arch/arm/plat-samsung/include/plat/pm.h12
-rw-r--r--arch/arm/plat-samsung/pm.c16
5 files changed, 14 insertions, 239 deletions
diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S
index b2ef44317368..afe5a762f46e 100644
--- a/arch/arm/mach-s3c64xx/sleep.S
+++ b/arch/arm/mach-s3c64xx/sleep.S
@@ -32,25 +32,13 @@
* code after resume.
*
* entry:
- * r0 = pointer to the save block
+ * r1 = v:p offset
*/
ENTRY(s3c_cpu_save)
stmfd sp!, { r4 - r12, lr }
-
- mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
- mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mrc p15, 0, r9, c1, c0, 0 @ Control register
- mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
- mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls
-
- stmia r0, { r4 - r13 } @ Save CP registers and SP
-
- @@ save our state to ram
- bl s3c_pm_cb_flushcache
+ ldr r3, =resume_with_mmu
+ bl cpu_suspend
@@ call final suspend code
ldr r0, =pm_cpu_sleep
@@ -61,18 +49,6 @@ ENTRY(s3c_cpu_save)
resume_with_mmu:
ldmfd sp!, { r4 - r12, pc } @ return, from sp from s3c_cpu_save
- .data
-
- /* the next bit is code, but it requires easy access to the
- * s3c_sleep_save_phys data before the MMU is switched on, so
- * we store the code that needs this variable in the .data where
- * the value can be written to (the .text segment is RO).
- */
-
- .global s3c_sleep_save_phys
-s3c_sleep_save_phys:
- .word 0
-
/* Sleep magic, the word before the resume entry point so that the
* bootloader can check for a resumeable image. */
@@ -110,35 +86,4 @@ ENTRY(s3c_cpu_resume)
orr r0, r0, #1 << 15 @ GPN15
str r0, [ r3, #S3C64XX_GPNDAT ]
#endif
-
- /* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
- * are thoroughly cleaned just in case the bootloader didn't do it
- * for us. */
- mov r0, #0
- mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache
- mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
- mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache
- mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
- @@mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
- @@mcr p15, 0, r0, c7, c7, 0 @ Invalidate I + D caches
-
- ldr r0, s3c_sleep_save_phys
- ldmia r0, { r4 - r13 }
-
- mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
- mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
-
- mov r0, #0 @ restore copro access controls
- mcr p15, 0, r11, c1, c0, 2 @ Co-processor access controls
- mcr p15, 0, r0, c7, c5, 4
-
- ldr r2, =resume_with_mmu
- mcr p15, 0, r9, c1, c0, 0 /* turn mmu back on */
- nop
- mov pc, r2 /* jump back */
-
- .end
+ b cpu_resume
diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S
index d4d222b716b4..a3d649466fb1 100644
--- a/arch/arm/mach-s5pv210/sleep.S
+++ b/arch/arm/mach-s5pv210/sleep.S
@@ -35,50 +35,24 @@
/* s3c_cpu_save
*
* entry:
- * r0 = save address (virtual addr of s3c_sleep_save_phys)
+ * r1 = v:p offset
*/
ENTRY(s3c_cpu_save)
stmfd sp!, { r3 - r12, lr }
-
- mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
- mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mrc p15, 0, r9, c1, c0, 0 @ Control register
- mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
- mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls
- mrc p15, 0, r12, c10, c2, 0 @ Read PRRR
- mrc p15, 0, r3, c10, c2, 1 @ READ NMRR
-
- stmia r0, { r3 - r13 }
-
- bl s3c_pm_cb_flushcache
+ ldr r3, =resume_with_mmu
+ bl cpu_suspend
ldr r0, =pm_cpu_sleep
ldr r0, [ r0 ]
mov pc, r0
resume_with_mmu:
- /*
- * After MMU is turned on, restore the previous MMU table.
- */
- ldr r9 , =(PAGE_OFFSET - PHYS_OFFSET)
- add r4, r4, r9
- str r12, [r4]
-
ldmfd sp!, { r3 - r12, pc }
.ltorg
- .data
-
- .global s3c_sleep_save_phys
-s3c_sleep_save_phys:
- .word 0
-
/* sleep magic, to allow the bootloader to check for an valid
* image to resume to. Must be the first word before the
* s3c_cpu_resume entry.
@@ -96,75 +70,4 @@ s3c_sleep_save_phys:
*/
ENTRY(s3c_cpu_resume)
- mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
- msr cpsr_c, r0
-
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @ invalidate TLBs
- mcr p15, 0, r1, c7, c5, 0 @ invalidate I Cache
-
- ldr r0, s3c_sleep_save_phys @ address of restore block
- ldmia r0, { r3 - r13 }
-
- mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c3, c0, 0 @ Domain ID
-
- mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
-
- mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
-
- mov r0, #0
- mcr p15, 0, r0, c8, c7, 0 @ Invalidate I & D TLB
-
- mov r0, #0 @ restore copro access
- mcr p15, 0, r11, c1, c0, 2 @ Co-processor access
- mcr p15, 0, r0, c7, c5, 4
-
- mcr p15, 0, r12, c10, c2, 0 @ write PRRR
- mcr p15, 0, r3, c10, c2, 1 @ write NMRR
-
- /*
- * In Cortex-A8, when MMU is turned on, the pipeline is flushed.
- * And there are no valid entries in the MMU table at this point.
- * So before turning on the MMU, the MMU entry for the DRAM address
- * range is added. After the MMU is turned on, the other entries
- * in the MMU table will be restored.
- */
-
- /* r6 = Translation Table BASE0 */
- mov r4, r6
- mov r4, r4, LSR #14
- mov r4, r4, LSL #14
-
- /* Load address for adding to MMU table list */
- ldr r11, =0xE010F000 @ INFORM0 reg.
- ldr r10, [r11, #0]
- mov r10, r10, LSR #18
- bic r10, r10, #0x3
- orr r4, r4, r10
-
- /* Calculate MMU table entry */
- mov r10, r10, LSL #18
- ldr r5, =0x40E
- orr r10, r10, r5
-
- /* Back up originally data */
- ldr r12, [r4]
-
- /* Add calculated MMU table entry into MMU table list */
- str r10, [r4]
-
- ldr r2, =resume_with_mmu
- mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc
-
- nop
- nop
- nop
- nop
- nop @ second-to-last before mmu
-
- mov pc, r2 @ go back to virtual address
-
- .ltorg
+ b cpu_resume
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index e73e3b6e88d2..fd7032f84ae7 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -44,23 +44,13 @@
/* s3c_cpu_save
*
* entry:
- * r0 = save address (virtual addr of s3c_sleep_save_phys)
+ * r1 = v:p offset
*/
ENTRY(s3c_cpu_save)
stmfd sp!, { r4 - r12, lr }
-
- @@ store co-processor registers
-
- mrc p15, 0, r4, c13, c0, 0 @ PID
- mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ translation table base address
- mrc p15, 0, r7, c1, c0, 0 @ control register
-
- stmia r0, { r4 - r13 }
-
- @@ write our state back to RAM
- bl s3c_pm_cb_flushcache
+ ldr r3, =resume_with_mmu
+ bl cpu_suspend
@@ jump to final code to send system to sleep
ldr r0, =pm_cpu_sleep
@@ -76,20 +66,6 @@ resume_with_mmu:
.ltorg
- @@ the next bits sit in the .data segment, even though they
- @@ happen to be code... the s3c_sleep_save_phys needs to be
- @@ accessed by the resume code before it can restore the MMU.
- @@ This means that the variable has to be close enough for the
- @@ code to read it... since the .text segment needs to be RO,
- @@ the data segment can be the only place to put this code.
-
- .data
-
- .global s3c_sleep_save_phys
-s3c_sleep_save_phys:
- .word 0
-
-
/* sleep magic, to allow the bootloader to check for an valid
* image to resume to. Must be the first word before the
* s3c_cpu_resume entry.
@@ -100,10 +76,6 @@ s3c_sleep_save_phys:
/* s3c_cpu_resume
*
* resume code entry for bootloader to call
- *
- * we must put this code here in the data segment as we have no
- * other way of restoring the stack pointer after sleep, and we
- * must not write to the code segment (code is read-only)
*/
ENTRY(s3c_cpu_resume)
@@ -134,25 +106,4 @@ ENTRY(s3c_cpu_resume)
beq 1001b
#endif /* CONFIG_DEBUG_RESUME */
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs
- mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches
-
- ldr r0, s3c_sleep_save_phys @ address of restore block
- ldmia r0, { r4 - r13 }
-
- mcr p15, 0, r4, c13, c0, 0 @ PID
- mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ translation table base
-
-#ifdef CONFIG_DEBUG_RESUME
- mov r3, #'R'
- strb r3, [ r2, #S3C2410_UTXH ]
-#endif
-
- ldr r2, =resume_with_mmu
- mcr p15, 0, r7, c1, c0, 0 @ turn on MMU, etc
- nop @ second-to-last before mmu
- mov pc, r2 @ go back to virtual address
-
- .ltorg
+ b cpu_resume
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index d9025e377675..4aa697dfe13f 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -50,13 +50,11 @@ extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */
/* from sleep.S */
-extern int s3c_cpu_save(unsigned long *saveblk);
+extern int s3c_cpu_save(unsigned long *saveblk, long);
extern void s3c_cpu_resume(void);
extern void s3c2410_cpu_suspend(void);
-extern unsigned long s3c_sleep_save_phys;
-
/* sleep save info */
/**
@@ -179,13 +177,5 @@ extern void s3c_pm_restore_gpios(void);
*/
extern void s3c_pm_save_gpios(void);
-/**
- * s3c_pm_cb_flushcache - callback for assembly code
- *
- * Callback to issue flush_cache_all() as this call is
- * not a directly callable object.
- */
-extern void s3c_pm_cb_flushcache(void);
-
extern void s3c_pm_save_core(void);
extern void s3c_pm_restore_core(void);
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 02d531fb3f81..d5b58d31903c 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -241,8 +241,6 @@ void (*pm_cpu_sleep)(void);
static int s3c_pm_enter(suspend_state_t state)
{
- static unsigned long regs_save[16];
-
/* ensure the debug is initialised (if enabled) */
s3c_pm_debug_init();
@@ -266,12 +264,6 @@ static int s3c_pm_enter(suspend_state_t state)
return -EINVAL;
}
- /* store the physical address of the register recovery block */
-
- s3c_sleep_save_phys = virt_to_phys(regs_save);
-
- S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys);
-
/* save all necessary core registers not covered by the drivers */
s3c_pm_save_gpios();
@@ -305,7 +297,7 @@ static int s3c_pm_enter(suspend_state_t state)
* we resume as it saves its own register state and restores it
* during the resume. */
- s3c_cpu_save(regs_save);
+ s3c_cpu_save(0, PLAT_PHYS_OFFSET - PAGE_OFFSET);
/* restore the cpu state using the kernel's cpu init code. */
@@ -336,12 +328,6 @@ static int s3c_pm_enter(suspend_state_t state)
return 0;
}
-/* callback from assembly code */
-void s3c_pm_cb_flushcache(void)
-{
- flush_cache_all();
-}
-
static int s3c_pm_prepare(void)
{
/* prepare check area if configured */