diff options
| -rw-r--r-- | drivers/parport/parport_serial.c | 21 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 33 |
2 files changed, 54 insertions, 0 deletions
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c index ef6169adb845..1b8bdb7e9bf4 100644 --- a/drivers/parport/parport_serial.c +++ b/drivers/parport/parport_serial.c @@ -63,6 +63,7 @@ enum parport_pc_pci_cards { timedia_9079b, timedia_9079c, wch_ch353_2s1p, + sunix_2s1p, }; /* each element directly indexed from enum list, above */ @@ -148,8 +149,12 @@ static struct parport_pc_pci cards[] = { /* timedia_9079b */ { 1, { { 2, 3 }, } }, /* timedia_9079c */ { 1, { { 2, 3 }, } }, /* wch_ch353_2s1p*/ { 1, { { 2, -1}, } }, + /* sunix_2s1p */ { 1, { { 3, -1 }, } }, }; +#define PCI_VENDOR_ID_SUNIX 0x1fd4 +#define PCI_DEVICE_ID_SUNIX_1999 0x1999 + static struct pci_device_id parport_serial_pci_tbl[] = { /* PCI cards */ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_110L, @@ -246,8 +251,18 @@ static struct pci_device_id parport_serial_pci_tbl[] = { { 0x1409, 0x7168, 0x1409, 0xb079, 0, 0, timedia_9079a }, { 0x1409, 0x7168, 0x1409, 0xc079, 0, 0, timedia_9079b }, { 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c }, + /* WCH CARDS */ { 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p}, + + /* + * More SUNIX variations. At least one of these has part number + * '5079A but subdevice 0x102. That board reports 0x0708 as + * its PCI Class. + */ + { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, PCI_VENDOR_ID_SUNIX, + 0x0102, 0, 0, sunix_2s1p }, + { 0, } /* terminate list */ }; MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl); @@ -470,6 +485,12 @@ static struct pciserial_board pci_parport_serial_boards[] = { .base_baud = 115200, .uart_offset = 8, }, + [sunix_2s1p] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, }; struct parport_serial_private { diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 3cb333242912..791c5a77ec61 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1565,6 +1565,9 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a +#define PCI_VENDOR_ID_SUNIX 0x1fd4 +#define PCI_DEVICE_ID_SUNIX_1999 0x1999 + /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -1961,6 +1964,23 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .setup = pci_timedia_setup, }, /* + * SUNIX (Timedia) cards + * Do not "probe" for these cards as there is at least one combination + * card that should be handled by parport_pc that doesn't match the + * rule in pci_timedia_probe. + * It is part number is MIO5079A but its subdevice ID is 0x0102. + * There are some boards with part number SER5037AL that report + * subdevice ID 0x0002. + */ + { + .vendor = PCI_VENDOR_ID_SUNIX, + .device = PCI_DEVICE_ID_SUNIX_1999, + .subvendor = PCI_VENDOR_ID_SUNIX, + .subdevice = PCI_ANY_ID, + .init = pci_timedia_init, + .setup = pci_timedia_setup, + }, + /* * Exar cards */ { @@ -4211,6 +4231,19 @@ static struct pci_device_id serial_pci_tbl[] = { pbn_b0_bt_1_921600 }, /* + * SUNIX (TIMEDIA) + */ + { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, + PCI_VENDOR_ID_SUNIX, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xffff00, + pbn_b0_bt_1_921600 }, + + { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, + PCI_VENDOR_ID_SUNIX, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, + pbn_b0_bt_1_921600 }, + + /* * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org> */ { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028, |