diff options
| -rw-r--r-- | drivers/power/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/power/Makefile | 1 | ||||
| -rw-r--r-- | drivers/power/max8903_charger.c | 391 | ||||
| -rw-r--r-- | include/linux/power/max8903_charger.h | 57 |
4 files changed, 457 insertions, 0 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 52a462fc6b84..1f50ebcc6399 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -203,6 +203,14 @@ config CHARGER_ISP1704 Say Y to enable support for USB Charger Detection with ISP1707/ISP1704 USB transceivers. +config CHARGER_MAX8903 + tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power" + help + Say Y to enable support for the MAX8903 DC-DC charger and sysfs. + The driver supports controlling charger-enable and current-limit + pins based on the status of charger connections with interrupt + handlers. + config CHARGER_TWL4030 tristate "OMAP TWL4030 BCI charger driver" depends on TWL4030_CORE diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 8385bfae8728..8fcd93ff2353 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -32,5 +32,6 @@ obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o +obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o diff --git a/drivers/power/max8903_charger.c b/drivers/power/max8903_charger.c new file mode 100644 index 000000000000..33ff0e37809e --- /dev/null +++ b/drivers/power/max8903_charger.c @@ -0,0 +1,391 @@ +/* + * max8903_charger.c - Maxim 8903 USB/Adapter Charger Driver + * + * Copyright (C) 2011 Samsung Electronics + * MyungJoo Ham <myungjoo.ham@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/power_supply.h> +#include <linux/platform_device.h> +#include <linux/power/max8903_charger.h> + +struct max8903_data { + struct max8903_pdata *pdata; + struct device *dev; + struct power_supply psy; + bool fault; + bool usb_in; + bool ta_in; +}; + +static enum power_supply_property max8903_charger_props[] = { + POWER_SUPPLY_PROP_STATUS, /* Charger status output */ + POWER_SUPPLY_PROP_ONLINE, /* External power source */ + POWER_SUPPLY_PROP_HEALTH, /* Fault or OK */ +}; + +static int max8903_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct max8903_data *data = container_of(psy, + struct max8903_data, psy); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + if (data->pdata->chg) { + if (gpio_get_value(data->pdata->chg) == 0) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (data->usb_in || data->ta_in) + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + } + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = 0; + if (data->usb_in || data->ta_in) + val->intval = 1; + break; + case POWER_SUPPLY_PROP_HEALTH: + val->intval = POWER_SUPPLY_HEALTH_GOOD; + if (data->fault) + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + break; + default: + return -EINVAL; + } + return 0; +} + +static irqreturn_t max8903_dcin(int irq, void *_data) +{ + struct max8903_data *data = _data; + struct max8903_pdata *pdata = data->pdata; + bool ta_in; + enum power_supply_type old_type; + + ta_in = gpio_get_value(pdata->dok) ? false : true; + + if (ta_in == data->ta_in) + return IRQ_HANDLED; + + data->ta_in = ta_in; + + /* Set Current-Limit-Mode 1:DC 0:USB */ + if (pdata->dcm) + gpio_set_value(pdata->dcm, ta_in ? 1 : 0); + + /* Charger Enable / Disable (cen is negated) */ + if (pdata->cen) + gpio_set_value(pdata->cen, ta_in ? 0 : + (data->usb_in ? 0 : 1)); + + dev_dbg(data->dev, "TA(DC-IN) Charger %s.\n", ta_in ? + "Connected" : "Disconnected"); + + old_type = data->psy.type; + + if (data->ta_in) + data->psy.type = POWER_SUPPLY_TYPE_MAINS; + else if (data->usb_in) + data->psy.type = POWER_SUPPLY_TYPE_USB; + else + data->psy.type = POWER_SUPPLY_TYPE_BATTERY; + + if (old_type != data->psy.type) + power_supply_changed(&data->psy); + + return IRQ_HANDLED; +} + +static irqreturn_t max8903_usbin(int irq, void *_data) +{ + struct max8903_data *data = _data; + struct max8903_pdata *pdata = data->pdata; + bool usb_in; + enum power_supply_type old_type; + + usb_in = gpio_get_value(pdata->uok) ? false : true; + + if (usb_in == data->usb_in) + return IRQ_HANDLED; + + data->usb_in = usb_in; + + /* Do not touch Current-Limit-Mode */ + + /* Charger Enable / Disable (cen is negated) */ + if (pdata->cen) + gpio_set_value(pdata->cen, usb_in ? 0 : + (data->ta_in ? 0 : 1)); + + dev_dbg(data->dev, "USB Charger %s.\n", usb_in ? + "Connected" : "Disconnected"); + + old_type = data->psy.type; + + if (data->ta_in) + data->psy.type = POWER_SUPPLY_TYPE_MAINS; + else if (data->usb_in) + data->psy.type = POWER_SUPPLY_TYPE_USB; + else + data->psy.type = POWER_SUPPLY_TYPE_BATTERY; + + if (old_type != data->psy.type) + power_supply_changed(&data->psy); + + return IRQ_HANDLED; +} + +static irqreturn_t max8903_fault(int irq, void *_data) +{ + struct max8903_data *data = _data; + struct max8903_pdata *pdata = data->pdata; + bool fault; + + fault = gpio_get_value(pdata->flt) ? false : true; + + if (fault == data->fault) + return IRQ_HANDLED; + + data->fault = fault; + + if (fault) + dev_err(data->dev, "Charger suffers a fault and stops.\n"); + else + dev_err(data->dev, "Charger recovered from a fault.\n"); + + return IRQ_HANDLED; +} + +static __devinit int max8903_probe(struct platform_device *pdev) +{ + struct max8903_data *data; + struct device *dev = &pdev->dev; + struct max8903_pdata *pdata = pdev->dev.platform_data; + int ret = 0; + int gpio; + int ta_in = 0; + int usb_in = 0; + + data = kzalloc(sizeof(struct max8903_data), GFP_KERNEL); + if (data == NULL) { + dev_err(dev, "Cannot allocate memory.\n"); + return -ENOMEM; + } + data->pdata = pdata; + data->dev = dev; + platform_set_drvdata(pdev, data); + + if (pdata->dc_valid == false && pdata->usb_valid == false) { + dev_err(dev, "No valid power sources.\n"); + ret = -EINVAL; + goto err; + } + + if (pdata->dc_valid) { + if (pdata->dok && gpio_is_valid(pdata->dok) && + pdata->dcm && gpio_is_valid(pdata->dcm)) { + gpio = pdata->dok; /* PULL_UPed Interrupt */ + ta_in = gpio_get_value(gpio) ? 0 : 1; + + gpio = pdata->dcm; /* Output */ + gpio_set_value(gpio, ta_in); + } else { + dev_err(dev, "When DC is wired, DOK and DCM should" + " be wired as well.\n"); + ret = -EINVAL; + goto err; + } + } else { + if (pdata->dcm) { + if (gpio_is_valid(pdata->dcm)) + gpio_set_value(pdata->dcm, 0); + else { + dev_err(dev, "Invalid pin: dcm.\n"); + ret = -EINVAL; + goto err; + } + } + } + + if (pdata->usb_valid) { + if (pdata->uok && gpio_is_valid(pdata->uok)) { + gpio = pdata->uok; + usb_in = gpio_get_value(gpio) ? 0 : 1; + } else { + dev_err(dev, "When USB is wired, UOK should be wired." + "as well.\n"); + ret = -EINVAL; + goto err; + } + } + + if (pdata->cen) { + if (gpio_is_valid(pdata->cen)) { + gpio_set_value(pdata->cen, (ta_in || usb_in) ? 0 : 1); + } else { + dev_err(dev, "Invalid pin: cen.\n"); + ret = -EINVAL; + goto err; + } + } + + if (pdata->chg) { + if (!gpio_is_valid(pdata->chg)) { + dev_err(dev, "Invalid pin: chg.\n"); + ret = -EINVAL; + goto err; + } + } + + if (pdata->flt) { + if (!gpio_is_valid(pdata->flt)) { + dev_err(dev, "Invalid pin: flt.\n"); + ret = -EINVAL; + goto err; + } + } + + if (pdata->usus) { + if (!gpio_is_valid(pdata->usus)) { + dev_err(dev, "Invalid pin: usus.\n"); + ret = -EINVAL; + goto err; + } + } + + data->fault = false; + data->ta_in = ta_in; + data->usb_in = usb_in; + + data->psy.name = "max8903_charger"; + data->psy.type = (ta_in) ? POWER_SUPPLY_TYPE_MAINS : + ((usb_in) ? POWER_SUPPLY_TYPE_USB : + POWER_SUPPLY_TYPE_BATTERY); + data->psy.get_property = max8903_get_property; + data->psy.properties = max8903_charger_props; + data->psy.num_properties = ARRAY_SIZE(max8903_charger_props); + + ret = power_supply_register(dev, &data->psy); + if (ret) { + dev_err(dev, "failed: power supply register.\n"); + goto err; + } + + if (pdata->dc_valid) { + ret = request_threaded_irq(gpio_to_irq(pdata->dok), + NULL, max8903_dcin, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "MAX8903 DC IN", data); + if (ret) { + dev_err(dev, "Cannot request irq %d for DC (%d)\n", + gpio_to_irq(pdata->dok), ret); + goto err_psy; + } + } + + if (pdata->usb_valid) { + ret = request_threaded_irq(gpio_to_irq(pdata->uok), + NULL, max8903_usbin, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "MAX8903 USB IN", data); + if (ret) { + dev_err(dev, "Cannot request irq %d for USB (%d)\n", + gpio_to_irq(pdata->uok), ret); + goto err_dc_irq; + } + } + + if (pdata->flt) { + ret = request_threaded_irq(gpio_to_irq(pdata->flt), + NULL, max8903_fault, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "MAX8903 Fault", data); + if (ret) { + dev_err(dev, "Cannot request irq %d for Fault (%d)\n", + gpio_to_irq(pdata->flt), ret); + goto err_usb_irq; + } + } + + return 0; + +err_usb_irq: + if (pdata->usb_valid) + free_irq(gpio_to_irq(pdata->uok), data); +err_dc_irq: + if (pdata->dc_valid) + free_irq(gpio_to_irq(pdata->dok), data); +err_psy: + power_supply_unregister(&data->psy); +err: + kfree(data); + return ret; +} + +static __devexit int max8903_remove(struct platform_device *pdev) +{ + struct max8903_data *data = platform_get_drvdata(pdev); + + if (data) { + struct max8903_pdata *pdata = data->pdata; + + if (pdata->flt) + free_irq(gpio_to_irq(pdata->flt), data); + if (pdata->usb_valid) + free_irq(gpio_to_irq(pdata->uok), data); + if (pdata->dc_valid) + free_irq(gpio_to_irq(pdata->dok), data); + power_supply_unregister(&data->psy); + kfree(data); + } + + return 0; +} + +static struct platform_driver max8903_driver = { + .probe = max8903_probe, + .remove = __devexit_p(max8903_remove), + .driver = { + .name = "max8903-charger", + .owner = THIS_MODULE, + }, +}; + +static int __init max8903_init(void) +{ + return platform_driver_register(&max8903_driver); +} +module_init(max8903_init); + +static void __exit max8903_exit(void) +{ + platform_driver_unregister(&max8903_driver); +} +module_exit(max8903_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MAX8903 Charger Driver"); +MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); +MODULE_ALIAS("max8903-charger"); diff --git a/include/linux/power/max8903_charger.h b/include/linux/power/max8903_charger.h new file mode 100644 index 000000000000..24f51db8a83f --- /dev/null +++ b/include/linux/power/max8903_charger.h @@ -0,0 +1,57 @@ +/* + * max8903_charger.h - Maxim 8903 USB/Adapter Charger Driver + * + * Copyright (C) 2011 Samsung Electronics + * MyungJoo Ham <myungjoo.ham@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MAX8903_CHARGER_H__ +#define __MAX8903_CHARGER_H__ + +struct max8903_pdata { + /* + * GPIOs + * cen, chg, flt, and usus are optional. + * dok, dcm, and uok are not optional depending on the status of + * dc_valid and usb_valid. + */ + int cen; /* Charger Enable input */ + int dok; /* DC(Adapter) Power OK output */ + int uok; /* USB Power OK output */ + int chg; /* Charger status output */ + int flt; /* Fault output */ + int dcm; /* Current-Limit Mode input (1: DC, 2: USB) */ + int usus; /* USB Suspend Input (1: suspended) */ + + /* + * DC(Adapter/TA) is wired + * When dc_valid is true, + * dok and dcm should be valid. + * + * At least one of dc_valid or usb_valid should be true. + */ + bool dc_valid; + /* + * USB is wired + * When usb_valid is true, + * uok should be valid. + */ + bool usb_valid; +}; + +#endif /* __MAX8903_CHARGER_H__ */ |