summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/gpio.txt16
-rw-r--r--include/linux/gpio.h95
2 files changed, 107 insertions, 4 deletions
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index 8da724e2a0ff..54630095aa3c 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -2,6 +2,9 @@ GPIO Interfaces
This provides an overview of GPIO access conventions on Linux.
+These calls use the gpio_* naming prefix. No other calls should use that
+prefix, or the related __gpio_* prefix.
+
What is a GPIO?
===============
@@ -69,11 +72,13 @@ in this document, but drivers acting as clients to the GPIO interface must
not care how it's implemented.)
That said, if the convention is supported on their platform, drivers should
-use it when possible. Platforms should declare GENERIC_GPIO support in
-Kconfig (boolean true), which multi-platform drivers can depend on when
-using the include file:
+use it when possible. Platforms must declare GENERIC_GPIO support in their
+Kconfig (boolean true), and provide an <asm/gpio.h> file. Drivers that can't
+work without standard GPIO calls should have Kconfig entries which depend
+on GENERIC_GPIO. The GPIO calls are available, either as "real code" or as
+optimized-away stubs, when drivers use the include file:
- #include <asm/gpio.h>
+ #include <linux/gpio.h>
If you stick to this convention then it'll be easier for other developers to
see what your code is doing, and help maintain it.
@@ -316,6 +321,9 @@ pulldowns integrated on some platforms. Not all platforms support them,
or support them in the same way; and any given board might use external
pullups (or pulldowns) so that the on-chip ones should not be used.
(When a circuit needs 5 kOhm, on-chip 100 kOhm resistors won't do.)
+Likewise drive strength (2 mA vs 20 mA) and voltage (1.8V vs 3.3V) is a
+platform-specific issue, as are models like (not) having a one-to-one
+correspondence between configurable pins and GPIOs.
There are other system-specific mechanisms that are not specified here,
like the aforementioned options for input de-glitching and wire-OR output.
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
new file mode 100644
index 000000000000..4987a84078ef
--- /dev/null
+++ b/include/linux/gpio.h
@@ -0,0 +1,95 @@
+#ifndef __LINUX_GPIO_H
+#define __LINUX_GPIO_H
+
+/* see Documentation/gpio.txt */
+
+#ifdef CONFIG_GENERIC_GPIO
+#include <asm/gpio.h>
+
+#else
+
+/*
+ * Some platforms don't support the GPIO programming interface.
+ *
+ * In case some driver uses it anyway (it should normally have
+ * depended on GENERIC_GPIO), these routines help the compiler
+ * optimize out much GPIO-related code ... or trigger a runtime
+ * warning when something is wrongly called.
+ */
+
+static inline int gpio_is_valid(int number)
+{
+ return 0;
+}
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+ return -ENOSYS;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+ return -ENOSYS;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+ return -ENOSYS;
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ /* GPIO can never have been requested or set as {in,out}put */
+ WARN_ON(1);
+ return 0;
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ /* GPIO can never have been requested or set as output */
+ WARN_ON(1);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ /* GPIO can never have been requested or set as {in,out}put */
+ WARN_ON(1);
+ return 0;
+}
+
+static inline int gpio_get_value_cansleep(unsigned gpio)
+{
+ /* GPIO can never have been requested or set as {in,out}put */
+ WARN_ON(1);
+ return 0;
+}
+
+static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+{
+ /* GPIO can never have been requested or set as output */
+ WARN_ON(1);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ /* GPIO can never have been requested or set as input */
+ WARN_ON(1);
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ /* irq can never have been returned from gpio_to_irq() */
+ WARN_ON(1);
+ return -EINVAL;
+}
+
+#endif
+
+#endif /* __LINUX_GPIO_H */