diff options
-rw-r--r-- | arch/arm/mach-omap2/devices.c | 45 | ||||
-rw-r--r-- | arch/arm/mach-omap2/usb-host.c | 194 | ||||
-rw-r--r-- | arch/arm/mach-omap2/usb-musb.c | 3 |
3 files changed, 0 insertions, 242 deletions
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index d428b95bd137..350116906f18 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -21,7 +21,6 @@ #include <linux/pinctrl/machine.h> #include <linux/platform_data/omap4-keypad.h> #include <linux/platform_data/omap_ocp2scp.h> -#include <linux/usb/omap_control_usb.h> #include <linux/wl12xx.h> #include <asm/mach-types.h> @@ -255,49 +254,6 @@ static inline void omap_init_camera(void) #endif } -#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB) -static struct omap_control_usb_platform_data omap4_control_usb_pdata = { - .type = 1, -}; - -struct resource omap4_control_usb_res[] = { - { - .name = "control_dev_conf", - .start = 0x4a002300, - .end = 0x4a002303, - .flags = IORESOURCE_MEM, - }, - { - .name = "otghs_control", - .start = 0x4a00233c, - .end = 0x4a00233f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap4_control_usb = { - .name = "omap-control-usb", - .id = -1, - .dev = { - .platform_data = &omap4_control_usb_pdata, - }, - .num_resources = 2, - .resource = omap4_control_usb_res, -}; - -static inline void __init omap_init_control_usb(void) -{ - if (!cpu_is_omap44xx()) - return; - - if (platform_device_register(&omap4_control_usb)) - pr_err("Error registering omap_control_usb device\n"); -} - -#else -static inline void omap_init_control_usb(void) { } -#endif /* CONFIG_OMAP_CONTROL_USB */ - int __init omap4_keyboard_init(struct omap4_keypad_platform_data *sdp4430_keypad_data, struct omap_board_data *bdata) { @@ -687,7 +643,6 @@ static int __init omap2_init_devices(void) omap_init_mbox(); /* If dtb is there, the devices will be created dynamically */ if (!of_have_populated_dt()) { - omap_init_control_usb(); omap_init_dmic(); omap_init_mcpdm(); omap_init_mcspi(); diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index aa27d7f5cbb7..544c92bf60cc 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -188,125 +188,6 @@ static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) return; } -static -void __init setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode) -{ - switch (port_mode[0]) { - case OMAP_EHCI_PORT_MODE_PHY: - omap_mux_init_signal("usbb1_ulpiphy_stp", - OMAP_PIN_OUTPUT); - omap_mux_init_signal("usbb1_ulpiphy_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpiphy_dat7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_EHCI_PORT_MODE_TLL: - omap_mux_init_signal("usbb1_ulpitll_stp", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("usbb1_ulpitll_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_ulpitll_dat7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_USBHS_PORT_MODE_UNUSED: - default: - break; - } - switch (port_mode[1]) { - case OMAP_EHCI_PORT_MODE_PHY: - omap_mux_init_signal("usbb2_ulpiphy_stp", - OMAP_PIN_OUTPUT); - omap_mux_init_signal("usbb2_ulpiphy_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpiphy_dat7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_EHCI_PORT_MODE_TLL: - omap_mux_init_signal("usbb2_ulpitll_stp", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("usbb2_ulpitll_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_ulpitll_dat7", - OMAP_PIN_INPUT_PULLDOWN); - break; - case OMAP_USBHS_PORT_MODE_UNUSED: - default: - break; - } -} - static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) { switch (port_mode[0]) { @@ -404,78 +285,6 @@ static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) } } -static -void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode) -{ - switch (port_mode[0]) { - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: - omap_mux_init_signal("usbb1_mm_rxdp", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_mm_rxdm", - OMAP_PIN_INPUT_PULLDOWN); - - case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: - omap_mux_init_signal("usbb1_mm_rxrcv", - OMAP_PIN_INPUT_PULLDOWN); - - case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: - omap_mux_init_signal("usbb1_mm_txen", - OMAP_PIN_INPUT_PULLDOWN); - - - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: - omap_mux_init_signal("usbb1_mm_txdat", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb1_mm_txse0", - OMAP_PIN_INPUT_PULLDOWN); - break; - - case OMAP_USBHS_PORT_MODE_UNUSED: - default: - break; - } - - switch (port_mode[1]) { - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: - omap_mux_init_signal("usbb2_mm_rxdp", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_mm_rxdm", - OMAP_PIN_INPUT_PULLDOWN); - - case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: - case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: - omap_mux_init_signal("usbb2_mm_rxrcv", - OMAP_PIN_INPUT_PULLDOWN); - - case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: - omap_mux_init_signal("usbb2_mm_txen", - OMAP_PIN_INPUT_PULLDOWN); - - - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: - omap_mux_init_signal("usbb2_mm_txdat", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usbb2_mm_txse0", - OMAP_PIN_INPUT_PULLDOWN); - break; - - case OMAP_USBHS_PORT_MODE_UNUSED: - default: - break; - } -} - void __init usbhs_init(struct usbhs_omap_platform_data *pdata) { struct omap_hwmod *uhh_hwm, *tll_hwm; @@ -489,9 +298,6 @@ void __init usbhs_init(struct usbhs_omap_platform_data *pdata) if (omap_rev() <= OMAP3430_REV_ES2_1) pdata->single_ulpi_bypass = true; - } else if (cpu_is_omap44xx()) { - setup_4430ehci_io_mux(pdata->port_mode); - setup_4430ohci_io_mux(pdata->port_mode); } uhh_hwm = omap_hwmod_lookup(USBHS_UHH_HWMODNAME); diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 3242a554ad6b..8c4de2708cf2 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -85,9 +85,6 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data->mode; musb_plat.extvbus = board_data->extvbus; - if (cpu_is_omap44xx()) - musb_plat.has_mailbox = true; - if (soc_is_am35xx()) { oh_name = "am35x_otg_hs"; name = "musb-am35x"; |