diff options
38 files changed, 88 insertions, 51 deletions
diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt index 684557474c15..ee4bb73683cd 100644 --- a/Documentation/DMA-mapping.txt +++ b/Documentation/DMA-mapping.txt @@ -199,6 +199,8 @@ address during PCI bus mastering you might do something like: "mydev: 24-bit DMA addressing not available.\n"); goto ignore_this_device; } +[Better use DMA_24BIT_MASK instead of 0x00ffffff. +See linux/include/dma-mapping.h for reference.] When pci_set_dma_mask() is successful, and returns zero, the PCI layer saves away this mask you have provided. The PCI layer will use this diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c index 69f4c7ce9a63..cac09e353be8 100644 --- a/drivers/atm/lanai.c +++ b/drivers/atm/lanai.c @@ -1972,7 +1972,7 @@ static int __devinit lanai_pci_start(struct lanai_dev *lanai) "(itf %d): No suitable DMA available.\n", lanai->number); return -EBUSY; } - if (pci_set_consistent_dma_mask(pci, 0xFFFFFFFF) != 0) { + if (pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK) != 0) { printk(KERN_WARNING DEV_LABEL "(itf %d): No suitable DMA available.\n", lanai->number); return -EBUSY; diff --git a/drivers/block/umem.c b/drivers/block/umem.c index c16e66b9c7a7..f7d4c65a7b8c 100644 --- a/drivers/block/umem.c +++ b/drivers/block/umem.c @@ -50,6 +50,7 @@ #include <linux/timer.h> #include <linux/pci.h> #include <linux/slab.h> +#include <linux/dma-mapping.h> #include <linux/fcntl.h> /* O_ACCMODE */ #include <linux/hdreg.h> /* HDIO_GETGEO */ @@ -881,8 +882,8 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i printk(KERN_INFO "Micro Memory(tm) controller #%d found at %02x:%02x (PCI Mem Module (Battery Backup))\n", card->card_number, dev->bus->number, dev->devfn); - if (pci_set_dma_mask(dev, 0xffffffffffffffffLL) && - pci_set_dma_mask(dev, 0xffffffffLL)) { + if (pci_set_dma_mask(dev, DMA_64BIT_MASK) && + pci_set_dma_mask(dev, DMA_32BIT_MASK)) { printk(KERN_WARNING "MM%d: NO suitable DMA found\n",num_cards); return -ENOMEM; } diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index e7fc28b07e5a..7627a75f4f7c 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -134,6 +134,7 @@ #include <linux/random.h> #include <linux/init.h> #include <linux/if_vlan.h> +#include <linux/dma-mapping.h> #include <asm/irq.h> #include <asm/io.h> @@ -2932,7 +2933,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i if (id->driver_data & DEV_HAS_HIGH_DMA) { /* packet format 3: supports 40-bit addressing */ np->desc_ver = DESC_VER_3; - if (pci_set_dma_mask(pci_dev, 0x0000007fffffffffULL)) { + if (pci_set_dma_mask(pci_dev, DMA_39BIT_MASK)) { printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n", pci_name(pci_dev)); } else { diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c index 9b8295ee06ef..ae71ed57c12d 100644 --- a/drivers/net/ioc3-eth.c +++ b/drivers/net/ioc3-eth.c @@ -44,6 +44,7 @@ #include <linux/ip.h> #include <linux/tcp.h> #include <linux/udp.h> +#include <linux/dma-mapping.h> #ifdef CONFIG_SERIAL_8250 #include <linux/serial_core.h> @@ -1195,17 +1196,17 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent) int err, pci_using_dac; /* Configure DMA attributes. */ - err = pci_set_dma_mask(pdev, 0xffffffffffffffffULL); + err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); if (!err) { pci_using_dac = 1; - err = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL); + err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); if (err < 0) { printk(KERN_ERR "%s: Unable to obtain 64 bit DMA " "for consistent allocations\n", pci_name(pdev)); goto out; } } else { - err = pci_set_dma_mask(pdev, 0xffffffffULL); + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (err) { printk(KERN_ERR "%s: No usable DMA configuration, " "aborting.\n", pci_name(pdev)); diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index 0fede50abd3e..8e9b1a537dee 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -1828,10 +1828,10 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ int using_dac = 0; /* See if we can set the dma mask early on; failure is fatal. */ - if (sizeof(dma_addr_t) == 8 && - !pci_set_dma_mask(pci_dev, 0xffffffffffffffffULL)) { + if (sizeof(dma_addr_t) == 8 && + !pci_set_dma_mask(pci_dev, DMA_64BIT_MASK)) { using_dac = 1; - } else if (!pci_set_dma_mask(pci_dev, 0xffffffff)) { + } else if (!pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) { using_dac = 0; } else { printk(KERN_WARNING "ns83820.c: pci_set_dma_mask failed!\n"); diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c index 9d3b51c3ef54..29a756dd979b 100644 --- a/drivers/net/wan/wanxl.c +++ b/drivers/net/wan/wanxl.c @@ -577,8 +577,8 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev, We set both dma_mask and consistent_dma_mask to 28 bits and pray pci_alloc_consistent() will use this info. It should work on most platforms */ - if (pci_set_consistent_dma_mask(pdev, 0x0FFFFFFF) || - pci_set_dma_mask(pdev, 0x0FFFFFFF)) { + if (pci_set_consistent_dma_mask(pdev, DMA_28BIT_MASK) || + pci_set_dma_mask(pdev, DMA_28BIT_MASK)) { printk(KERN_ERR "wanXL: No usable DMA configuration\n"); return -EIO; } diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c index b41d666fea3c..bfa0cc319a09 100644 --- a/drivers/net/wireless/prism54/islpci_hotplug.c +++ b/drivers/net/wireless/prism54/islpci_hotplug.c @@ -22,6 +22,7 @@ #include <linux/pci.h> #include <linux/delay.h> #include <linux/init.h> /* For __init, __exit */ +#include <linux/dma-mapping.h> #include "prismcompat.h" #include "islpci_dev.h" @@ -124,7 +125,7 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id) } /* enable PCI DMA */ - if (pci_set_dma_mask(pdev, 0xffffffff)) { + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_ERR "%s: 32-bit PCI DMA not supported", DRV_NAME); goto do_pci_disable_device; } diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c index 5bf83cbca868..bde3d5834ade 100644 --- a/drivers/scsi/BusLogic.c +++ b/drivers/scsi/BusLogic.c @@ -42,6 +42,7 @@ #include <linux/pci.h> #include <linux/spinlock.h> #include <linux/jiffies.h> +#include <linux/dma-mapping.h> #include <scsi/scsicam.h> #include <asm/dma.h> @@ -677,7 +678,7 @@ static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAd if (pci_enable_device(PCI_Device)) continue; - if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff)) + if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK )) continue; Bus = PCI_Device->bus->number; @@ -832,7 +833,7 @@ static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAd if (pci_enable_device(PCI_Device)) continue; - if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff)) + if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK)) continue; Bus = PCI_Device->bus->number; @@ -886,7 +887,7 @@ static int __init BusLogic_InitializeFlashPointProbeInfo(struct BusLogic_HostAda if (pci_enable_device(PCI_Device)) continue; - if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff)) + if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK)) continue; Bus = PCI_Device->bus->number; diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index 9f45ae1745da..3dce21c78737 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -89,6 +89,7 @@ #include <linux/string.h> #include <linux/ioport.h> #include <linux/slab.h> +#include <linux/dma-mapping.h> #include <asm/io.h> #include <asm/irq.h> @@ -1052,7 +1053,7 @@ static int __devinit inia100_probe_one(struct pci_dev *pdev, if (pci_enable_device(pdev)) goto out; - if (pci_set_dma_mask(pdev, 0xffffffffULL)) { + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_WARNING "Unable to set 32bit DMA " "on inia100 adapter, ignoring.\n"); goto out_disable_device; diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index a16f8ded8f1d..8df4a0ea3761 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -32,6 +32,7 @@ #include <linux/slab.h> #include <linux/completion.h> #include <linux/blkdev.h> +#include <linux/dma-mapping.h> #include <asm/semaphore.h> #include <asm/uaccess.h> diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index c2596335549d..720330778648 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -45,6 +45,7 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/spinlock.h> +#include <linux/dma-mapping.h> #include <linux/syscalls.h> #include <linux/delay.h> #include <linux/smp_lock.h> @@ -806,8 +807,8 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, * to driver communication memory to be allocated below 2gig */ if (aac_drivers[index].quirks & AAC_QUIRK_31BIT) - if (pci_set_dma_mask(pdev, 0x7FFFFFFFULL) || - pci_set_consistent_dma_mask(pdev, 0x7FFFFFFFULL)) + if (pci_set_dma_mask(pdev, DMA_31BIT_MASK) || + pci_set_consistent_dma_mask(pdev, DMA_31BIT_MASK)) goto out; pci_set_master(pdev); diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c index 5227a779c05c..a198d86667e9 100644 --- a/drivers/scsi/atp870u.c +++ b/drivers/scsi/atp870u.c @@ -28,6 +28,7 @@ #include <linux/spinlock.h> #include <linux/pci.h> #include <linux/blkdev.h> +#include <linux/dma-mapping.h> #include <asm/system.h> #include <asm/io.h> @@ -2631,7 +2632,7 @@ static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (pci_enable_device(pdev)) return -EIO; - if (!pci_set_dma_mask(pdev, 0xFFFFFFFFUL)) { + if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_INFO "atp870u: use 32bit DMA mask.\n"); } else { printk(KERN_ERR "atp870u: DMA mask required but not available.\n"); diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 6e6b293dcb28..b1b704a42efd 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -57,6 +57,7 @@ MODULE_DESCRIPTION("Adaptec I2O RAID Driver"); #include <linux/reboot.h> #include <linux/spinlock.h> #include <linux/smp_lock.h> +#include <linux/dma-mapping.h> #include <linux/timer.h> #include <linux/string.h> @@ -906,8 +907,8 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev } pci_set_master(pDev); - if (pci_set_dma_mask(pDev, 0xffffffffffffffffULL) && - pci_set_dma_mask(pDev, 0xffffffffULL)) + if (pci_set_dma_mask(pDev, DMA_64BIT_MASK) && + pci_set_dma_mask(pDev, DMA_32BIT_MASK)) return -EINVAL; base_addr0_phys = pci_resource_start(pDev,0); diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c index b3f9de8f7595..059eeee4b554 100644 --- a/drivers/scsi/eata.c +++ b/drivers/scsi/eata.c @@ -490,6 +490,7 @@ #include <linux/init.h> #include <linux/ctype.h> #include <linux/spinlock.h> +#include <linux/dma-mapping.h> #include <asm/byteorder.h> #include <asm/dma.h> #include <asm/io.h> @@ -1426,7 +1427,7 @@ static int port_detect(unsigned long port_base, unsigned int j, if (ha->pdev) { pci_set_master(ha->pdev); - if (pci_set_dma_mask(ha->pdev, 0xffffffff)) + if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) printk("%s: warning, pci_set_dma_mask failed.\n", ha->board_name); } diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index 7f7013e80a88..d5740bbdef3e 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -388,6 +388,7 @@ #include <linux/proc_fs.h> #include <linux/time.h> #include <linux/timer.h> +#include <linux/dma-mapping.h> #ifdef GDTH_RTC #include <linux/mc146818rtc.h> #endif @@ -4527,15 +4528,15 @@ static int __init gdth_detect(struct scsi_host_template *shtp) if (!(ha->cache_feat & ha->raw_feat & ha->screen_feat &GDT_64BIT)|| /* 64-bit DMA only supported from FW >= x.43 */ (!ha->dma64_support)) { - if (pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffff)) { + if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) { printk(KERN_WARNING "GDT-PCI %d: Unable to set 32-bit DMA\n", hanum); err = TRUE; } } else { shp->max_cmd_len = 16; - if (!pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffffffffffffULL)) { + if (!pci_set_dma_mask(pcistr[ctr].pdev, DMA_64BIT_MASK)) { printk("GDT-PCI %d: 64-bit DMA enabled\n", hanum); - } else if (pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffff)) { + } else if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) { printk(KERN_WARNING "GDT-PCI %d: Unable to set 64/32-bit DMA\n", hanum); err = TRUE; } diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c index ea6f3c0e05d9..0cc7f65b584f 100644 --- a/drivers/scsi/initio.c +++ b/drivers/scsi/initio.c @@ -127,6 +127,7 @@ #include <linux/sched.h> #include <linux/slab.h> #include <linux/jiffies.h> +#include <linux/dma-mapping.h> #include <asm/io.h> #include <scsi/scsi.h> @@ -2780,7 +2781,7 @@ static int tul_NewReturnNumberOfAdapters(void) if (((dRegValue & 0xFF00) >> 8) == 0xFF) dRegValue = 0; wBIOS = (wBIOS << 8) + ((UWORD) ((dRegValue & 0xFF00) >> 8)); - if (pci_set_dma_mask(pDev, 0xffffffff)) { + if (pci_set_dma_mask(pDev, DMA_32BIT_MASK)) { printk(KERN_WARNING "i91u: Could not set 32 bit DMA mask\n"); continue; diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index 481708d527ae..a4c0b04cfdbd 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -179,6 +179,7 @@ #include <linux/blkdev.h> #include <linux/types.h> +#include <linux/dma-mapping.h> #include <scsi/sg.h> @@ -7284,10 +7285,10 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr) * are guaranteed to be < 4G. */ if (IPS_ENABLE_DMA64 && IPS_HAS_ENH_SGLIST(ha) && - !pci_set_dma_mask(ha->pcidev, 0xffffffffffffffffULL)) { + !pci_set_dma_mask(ha->pcidev, DMA_64BIT_MASK)) { (ha)->flags |= IPS_HA_ENH_SG; } else { - if (pci_set_dma_mask(ha->pcidev, 0xffffffffULL) != 0) { + if (pci_set_dma_mask(ha->pcidev, DMA_32BIT_MASK) != 0) { printk(KERN_WARNING "Unable to set DMA Mask\n"); return ips_abort_init(ha, index); } diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 7144674bc8e6..80b68a2481b3 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -45,6 +45,7 @@ #include <linux/interrupt.h> #include <linux/pci.h> #include <linux/init.h> +#include <linux/dma-mapping.h> #include <scsi/scsicam.h> #include "scsi.h" @@ -2094,7 +2095,7 @@ make_local_pdev(adapter_t *adapter, struct pci_dev **pdev) memcpy(*pdev, adapter->dev, sizeof(struct pci_dev)); - if( pci_set_dma_mask(*pdev, 0xffffffff) != 0 ) { + if( pci_set_dma_mask(*pdev, DMA_32BIT_MASK) != 0 ) { kfree(*pdev); return -1; } @@ -4859,10 +4860,10 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* Set the Mode of addressing to 64 bit if we can */ if ((adapter->flag & BOARD_64BIT) && (sizeof(dma_addr_t) == 8)) { - pci_set_dma_mask(pdev, 0xffffffffffffffffULL); + pci_set_dma_mask(pdev, DMA_64BIT_MASK); adapter->has_64bit_addr = 1; } else { - pci_set_dma_mask(pdev, 0xffffffff); + pci_set_dma_mask(pdev, DMA_32BIT_MASK); adapter->has_64bit_addr = 0; } diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c index a279ebb61447..30ee0ef4b459 100644 --- a/drivers/scsi/nsp32.c +++ b/drivers/scsi/nsp32.c @@ -38,6 +38,7 @@ #include <linux/pci.h> #include <linux/delay.h> #include <linux/ctype.h> +#include <linux/dma-mapping.h> #include <asm/dma.h> #include <asm/system.h> @@ -2776,7 +2777,7 @@ static int nsp32_detect(struct scsi_host_template *sht) /* * setup DMA */ - if (pci_set_dma_mask(PCIDEV, 0xffffffffUL) != 0) { + if (pci_set_dma_mask(PCIDEV, DMA_32BIT_MASK) != 0) { nsp32_msg (KERN_ERR, "failed to set PCI DMA mask"); goto scsi_unregister; } diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index e0230249fa0f..5a48e55f9418 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -350,6 +350,7 @@ #include <linux/pci_ids.h> #include <linux/interrupt.h> #include <linux/init.h> +#include <linux/dma-mapping.h> #include <asm/io.h> #include <asm/irq.h> @@ -4321,7 +4322,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) #ifdef QLA_64BIT_PTR if (pci_set_dma_mask(ha->pdev, (dma_addr_t) ~ 0ULL)) { - if (pci_set_dma_mask(ha->pdev, 0xffffffff)) { + if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) { printk(KERN_WARNING "scsi(%li): Unable to set a " "suitable DMA mask - aborting\n", ha->host_no); error = -ENODEV; @@ -4331,7 +4332,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) dprintk(2, "scsi(%li): 64 Bit PCI Addressing Enabled\n", ha->host_no); #else - if (pci_set_dma_mask(ha->pdev, 0xffffffff)) { + if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) { printk(KERN_WARNING "scsi(%li): Unable to set a " "suitable DMA mask - aborting\n", ha->host_no); error = -ENODEV; diff --git a/drivers/scsi/qlogicfc.c b/drivers/scsi/qlogicfc.c index 5b15998c71a6..52b224a5d6fd 100644 --- a/drivers/scsi/qlogicfc.c +++ b/drivers/scsi/qlogicfc.c @@ -61,6 +61,7 @@ #include <linux/unistd.h> #include <linux/spinlock.h> #include <linux/interrupt.h> +#include <linux/dma-mapping.h> #include <linux/jiffies.h> #include <asm/io.h> #include <asm/irq.h> @@ -738,8 +739,8 @@ static int isp2x00_detect(struct scsi_host_template * tmpt) continue; /* Try to configure DMA attributes. */ - if (pci_set_dma_mask(pdev, 0xffffffffffffffffULL) && - pci_set_dma_mask(pdev, 0xffffffffULL)) + if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) && + pci_set_dma_mask(pdev, DMA_32BIT_MASK)) continue; host = scsi_register(tmpt, sizeof(struct isp2x00_hostdata)); diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index a8731062a74c..9b4751aecc23 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -21,6 +21,7 @@ enum dma_data_direction { #define DMA_30BIT_MASK 0x000000003fffffffULL #define DMA_29BIT_MASK 0x000000001fffffffULL #define DMA_28BIT_MASK 0x000000000fffffffULL +#define DMA_24BIT_MASK 0x0000000000ffffffULL #include <asm/dma-mapping.h> diff --git a/sound/oss/esssolo1.c b/sound/oss/esssolo1.c index 78d3e29ce968..6861563d7525 100644 --- a/sound/oss/esssolo1.c +++ b/sound/oss/esssolo1.c @@ -2348,7 +2348,7 @@ static int __devinit solo1_probe(struct pci_dev *pcidev, const struct pci_device /* Recording requires 24-bit DMA, so attempt to set dma mask * to 24 bits first, then 32 bits (playback only) if that fails. */ - if (pci_set_dma_mask(pcidev, 0x00ffffff) && + if (pci_set_dma_mask(pcidev, DMA_24BIT_MASK) && pci_set_dma_mask(pcidev, DMA_32BIT_MASK)) { printk(KERN_WARNING "solo1: architecture does not support 24bit or 32bit PCI busmaster DMA\n"); return -ENODEV; diff --git a/sound/oss/sonicvibes.c b/sound/oss/sonicvibes.c index 4471757b7985..42bd276cfc39 100644 --- a/sound/oss/sonicvibes.c +++ b/sound/oss/sonicvibes.c @@ -116,6 +116,7 @@ #include <linux/spinlock.h> #include <linux/smp_lock.h> #include <linux/gameport.h> +#include <linux/dma-mapping.h> #include <linux/mutex.h> @@ -2535,7 +2536,7 @@ static int __devinit sv_probe(struct pci_dev *pcidev, const struct pci_device_id return -ENODEV; if (pcidev->irq == 0) return -ENODEV; - if (pci_set_dma_mask(pcidev, 0x00ffffff)) { + if (pci_set_dma_mask(pcidev, DMA_24BIT_MASK)) { printk(KERN_WARNING "sonicvibes: architecture does not support 24bit PCI busmaster DMA\n"); return -ENODEV; } diff --git a/sound/pci/ad1889.c b/sound/pci/ad1889.c index 2aa5a7fdb6e0..c6c8333acc62 100644 --- a/sound/pci/ad1889.c +++ b/sound/pci/ad1889.c @@ -39,6 +39,7 @@ #include <linux/interrupt.h> #include <linux/compiler.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <sound/driver.h> #include <sound/core.h> diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c index e264136e8fb4..fc92b6896c24 100644 --- a/sound/pci/ali5451/ali5451.c +++ b/sound/pci/ali5451/ali5451.c @@ -33,6 +33,7 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/moduleparam.h> +#include <linux/dma-mapping.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/info.h> @@ -2220,8 +2221,8 @@ static int __devinit snd_ali_create(struct snd_card *card, if ((err = pci_enable_device(pci)) < 0) return err; /* check, if we can restrict PCI DMA transfers to 31 bits */ - if (pci_set_dma_mask(pci, 0x7fffffff) < 0 || - pci_set_consistent_dma_mask(pci, 0x7fffffff) < 0) { + if (pci_set_dma_mask(pci, DMA_31BIT_MASK) < 0 || + pci_set_consistent_dma_mask(pci, DMA_31BIT_MASK) < 0) { snd_printk(KERN_ERR "architecture does not support 31bit PCI busmaster DMA\n"); pci_disable_device(pci); return -ENXIO; diff --git a/sound/pci/als4000.c b/sound/pci/als4000.c index 7b2ff5f4672e..100d8127a411 100644 --- a/sound/pci/als4000.c +++ b/sound/pci/als4000.c @@ -70,6 +70,7 @@ #include <linux/slab.h> #include <linux/gameport.h> #include <linux/moduleparam.h> +#include <linux/dma-mapping.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/rawmidi.h> @@ -688,8 +689,8 @@ static int __devinit snd_card_als4000_probe(struct pci_dev *pci, return err; } /* check, if we can restrict PCI DMA transfers to 24 bits */ - if (pci_set_dma_mask(pci, 0x00ffffff) < 0 || - pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) { + if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 || + pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) { snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n"); pci_disable_device(pci); return -ENXIO; diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c index e077eb3fbe2f..680077e1e057 100644 --- a/sound/pci/azt3328.c +++ b/sound/pci/azt3328.c @@ -104,6 +104,7 @@ #include <linux/slab.h> #include <linux/gameport.h> #include <linux/moduleparam.h> +#include <linux/dma-mapping.h> #include <sound/core.h> #include <sound/control.h> #include <sound/pcm.h> @@ -1669,8 +1670,8 @@ snd_azf3328_create(struct snd_card *card, chip->irq = -1; /* check if we can restrict PCI DMA transfers to 24 bits */ - if (pci_set_dma_mask(pci, 0x00ffffff) < 0 || - pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) { + if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 || + pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) { snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n"); err = -ENXIO; goto out_err; diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c index 2208dbd48be9..3e332f398162 100644 --- a/sound/pci/emu10k1/emu10k1x.c +++ b/sound/pci/emu10k1/emu10k1x.c @@ -36,6 +36,7 @@ #include <linux/dma-mapping.h> #include <linux/slab.h> #include <linux/moduleparam.h> +#include <linux/dma-mapping.h> #include <sound/core.h> #include <sound/initval.h> #include <sound/pcm.h> diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c index 0d556b09ad04..4d62fe439177 100644 --- a/sound/pci/es1938.c +++ b/sound/pci/es1938.c @@ -55,6 +55,7 @@ #include <linux/gameport.h> #include <linux/moduleparam.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <sound/core.h> #include <sound/control.h> #include <sound/pcm.h> @@ -1517,8 +1518,8 @@ static int __devinit snd_es1938_create(struct snd_card *card, if ((err = pci_enable_device(pci)) < 0) return err; /* check, if we can restrict PCI DMA transfers to 24 bits */ - if (pci_set_dma_mask(pci, 0x00ffffff) < 0 || - pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) { + if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 || + pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) { snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n"); pci_disable_device(pci); return -ENXIO; diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c index dd465a186e11..e3ad17f53c29 100644 --- a/sound/pci/es1968.c +++ b/sound/pci/es1968.c @@ -104,6 +104,7 @@ #include <linux/slab.h> #include <linux/gameport.h> #include <linux/moduleparam.h> +#include <linux/dma-mapping.h> #include <linux/mutex.h> #include <sound/core.h> diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c index 672e198317e1..b88eeba2f5d1 100644 --- a/sound/pci/ice1712/ice1712.c +++ b/sound/pci/ice1712/ice1712.c @@ -56,7 +56,9 @@ #include <linux/dma-mapping.h> #include <linux/slab.h> #include <linux/moduleparam.h> +#include <linux/dma-mapping.h> #include <linux/mutex.h> + #include <sound/core.h> #include <sound/cs8427.h> #include <sound/info.h> diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c index 8bc084956c28..44393e190929 100644 --- a/sound/pci/maestro3.c +++ b/sound/pci/maestro3.c @@ -41,6 +41,7 @@ #include <linux/slab.h> #include <linux/vmalloc.h> #include <linux/moduleparam.h> +#include <linux/dma-mapping.h> #include <sound/core.h> #include <sound/info.h> #include <sound/control.h> diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c index 43ee3b2b948f..b5a095052d4c 100644 --- a/sound/pci/mixart/mixart.c +++ b/sound/pci/mixart/mixart.c @@ -28,6 +28,8 @@ #include <linux/dma-mapping.h> #include <linux/moduleparam.h> #include <linux/mutex.h> +#include <linux/dma-mapping.h> + #include <sound/core.h> #include <sound/initval.h> #include <sound/info.h> diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c index f679779d96e3..35875c8aa299 100644 --- a/sound/pci/pcxhr/pcxhr.c +++ b/sound/pci/pcxhr/pcxhr.c @@ -30,6 +30,7 @@ #include <linux/delay.h> #include <linux/moduleparam.h> #include <linux/mutex.h> +#include <linux/dma-mapping.h> #include <sound/core.h> #include <sound/initval.h> diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c index 7bbea3738b8a..2d66a09fe5ee 100644 --- a/sound/pci/sonicvibes.c +++ b/sound/pci/sonicvibes.c @@ -30,6 +30,7 @@ #include <linux/slab.h> #include <linux/gameport.h> #include <linux/moduleparam.h> +#include <linux/dma-mapping.h> #include <sound/core.h> #include <sound/pcm.h> @@ -1227,8 +1228,8 @@ static int __devinit snd_sonicvibes_create(struct snd_card *card, if ((err = pci_enable_device(pci)) < 0) return err; /* check, if we can restrict PCI DMA transfers to 24 bits */ - if (pci_set_dma_mask(pci, 0x00ffffff) < 0 || - pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) { + if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 || + pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) { snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n"); pci_disable_device(pci); return -ENXIO; diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c index 83b7d8aba9e6..52178b8ad49d 100644 --- a/sound/pci/trident/trident_main.c +++ b/sound/pci/trident/trident_main.c @@ -35,6 +35,7 @@ #include <linux/slab.h> #include <linux/vmalloc.h> #include <linux/gameport.h> +#include <linux/dma-mapping.h> #include <sound/core.h> #include <sound/info.h> @@ -3554,8 +3555,8 @@ int __devinit snd_trident_create(struct snd_card *card, if ((err = pci_enable_device(pci)) < 0) return err; /* check, if we can restrict PCI DMA transfers to 30 bits */ - if (pci_set_dma_mask(pci, 0x3fffffff) < 0 || - pci_set_consistent_dma_mask(pci, 0x3fffffff) < 0) { + if (pci_set_dma_mask(pci, DMA_30BIT_MASK) < 0 || + pci_set_consistent_dma_mask(pci, DMA_30BIT_MASK) < 0) { snd_printk(KERN_ERR "architecture does not support 30bit PCI busmaster DMA\n"); pci_disable_device(pci); return -ENXIO; |