summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/ieee802154/mrf24j40.c147
1 files changed, 50 insertions, 97 deletions
diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
index c8b7ce6b5462..ca98b5c603ce 100644
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -543,35 +543,6 @@ static int read_long_reg(struct mrf24j40 *devrec, u16 reg, u8 *value)
return ret;
}
-static int write_long_reg(struct mrf24j40 *devrec, u16 reg, u8 val)
-{
- int ret;
- u16 cmd;
- struct spi_message msg;
- struct spi_transfer xfer = {
- .len = 3,
- .tx_buf = devrec->buf,
- .rx_buf = devrec->buf,
- };
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfer, &msg);
-
- cmd = MRF24J40_WRITELONG(reg);
- mutex_lock(&devrec->buffer_mutex);
- devrec->buf[0] = cmd >> 8 & 0xff;
- devrec->buf[1] = cmd & 0xff;
- devrec->buf[2] = val;
-
- ret = spi_sync(devrec->spi, &msg);
- if (ret)
- dev_err(printdev(devrec),
- "SPI write Failed for long register 0x%hx\n", reg);
-
- mutex_unlock(&devrec->buffer_mutex);
- return ret;
-}
-
/* This function relies on an undocumented write method. Once a write command
and address is set, as many bytes of data as desired can be clocked into
the device. The datasheet only shows setting one byte at a time. */
@@ -755,33 +726,23 @@ static int mrf24j40_ed(struct ieee802154_hw *hw, u8 *level)
static int mrf24j40_start(struct ieee802154_hw *hw)
{
struct mrf24j40 *devrec = hw->priv;
- u8 val;
- int ret;
dev_dbg(printdev(devrec), "start\n");
- ret = read_short_reg(devrec, REG_INTCON, &val);
- if (ret)
- return ret;
- val &= ~(0x1|0x8); /* Clear TXNIE and RXIE. Enable interrupts */
- write_short_reg(devrec, REG_INTCON, val);
-
- return 0;
+ /* Clear TXNIE and RXIE. Enable interrupts */
+ return regmap_update_bits(devrec->regmap_short, REG_INTCON,
+ 0x01 | 0x08, 0x00);
}
static void mrf24j40_stop(struct ieee802154_hw *hw)
{
struct mrf24j40 *devrec = hw->priv;
- u8 val;
- int ret;
dev_dbg(printdev(devrec), "stop\n");
- ret = read_short_reg(devrec, REG_INTCON, &val);
- if (ret)
- return;
- val |= 0x1|0x8; /* Set TXNIE and RXIE. Disable Interrupts */
- write_short_reg(devrec, REG_INTCON, val);
+ /* Set TXNIE and RXIE. Disable Interrupts */
+ regmap_update_bits(devrec->regmap_short, REG_INTCON, 0x01 | 0x08,
+ 0x01 | 0x08);
}
static int mrf24j40_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
@@ -798,20 +759,20 @@ static int mrf24j40_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
/* Set Channel TODO */
val = (channel-11) << 4 | 0x03;
- write_long_reg(devrec, REG_RFCON0, val);
+ ret = regmap_update_bits(devrec->regmap_long, REG_RFCON0, 0xf0, val);
+ if (ret)
+ return ret;
/* RF Reset */
- ret = read_short_reg(devrec, REG_RFCTL, &val);
+ ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, 0x04, 0x04);
if (ret)
return ret;
- val |= 0x04;
- write_short_reg(devrec, REG_RFCTL, val);
- val &= ~0x04;
- write_short_reg(devrec, REG_RFCTL, val);
- udelay(SET_CHANNEL_DELAY_US); /* per datasheet */
+ ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, 0x04, 0x00);
+ if (!ret)
+ udelay(SET_CHANNEL_DELAY_US); /* per datasheet */
- return 0;
+ return ret;
}
static int mrf24j40_filter(struct ieee802154_hw *hw,
@@ -829,8 +790,8 @@ static int mrf24j40_filter(struct ieee802154_hw *hw,
addrh = le16_to_cpu(filt->short_addr) >> 8 & 0xff;
addrl = le16_to_cpu(filt->short_addr) & 0xff;
- write_short_reg(devrec, REG_SADRH, addrh);
- write_short_reg(devrec, REG_SADRL, addrl);
+ regmap_write(devrec->regmap_short, REG_SADRH, addrh);
+ regmap_write(devrec->regmap_short, REG_SADRL, addrl);
dev_dbg(printdev(devrec),
"Set short addr to %04hx\n", filt->short_addr);
}
@@ -841,7 +802,8 @@ static int mrf24j40_filter(struct ieee802154_hw *hw,
memcpy(addr, &filt->ieee_addr, 8);
for (i = 0; i < 8; i++)
- write_short_reg(devrec, REG_EADR0 + i, addr[i]);
+ regmap_write(devrec->regmap_short, REG_EADR0 + i,
+ addr[i]);
#ifdef DEBUG
pr_debug("Set long addr to: ");
@@ -857,8 +819,8 @@ static int mrf24j40_filter(struct ieee802154_hw *hw,
panidh = le16_to_cpu(filt->pan_id) >> 8 & 0xff;
panidl = le16_to_cpu(filt->pan_id) & 0xff;
- write_short_reg(devrec, REG_PANIDH, panidh);
- write_short_reg(devrec, REG_PANIDL, panidl);
+ regmap_write(devrec->regmap_short, REG_PANIDH, panidh);
+ regmap_write(devrec->regmap_short, REG_PANIDL, panidl);
dev_dbg(printdev(devrec), "Set PANID to %04hx\n", filt->pan_id);
}
@@ -868,14 +830,14 @@ static int mrf24j40_filter(struct ieee802154_hw *hw,
u8 val;
int ret;
- ret = read_short_reg(devrec, REG_RXMCR, &val);
- if (ret)
- return ret;
if (filt->pan_coord)
- val |= 0x8;
+ val = 0x8;
else
- val &= ~0x8;
- write_short_reg(devrec, REG_RXMCR, val);
+ val = 0x0;
+ ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 0x8,
+ val);
+ if (ret)
+ return ret;
/* REG_SLOTTED is maintained as default (unslotted/CSMA-CA).
* REG_ORDER is maintained as default (no beacon/superframe).
@@ -976,80 +938,73 @@ out:
static int mrf24j40_hw_init(struct mrf24j40 *devrec)
{
int ret;
- u8 val;
/* Initialize the device.
From datasheet section 3.2: Initialization. */
- ret = write_short_reg(devrec, REG_SOFTRST, 0x07);
+ ret = regmap_write(devrec->regmap_short, REG_SOFTRST, 0x07);
if (ret)
goto err_ret;
- ret = write_short_reg(devrec, REG_PACON2, 0x98);
+ ret = regmap_write(devrec->regmap_short, REG_PACON2, 0x98);
if (ret)
goto err_ret;
- ret = write_short_reg(devrec, REG_TXSTBL, 0x95);
+ ret = regmap_write(devrec->regmap_short, REG_TXSTBL, 0x95);
if (ret)
goto err_ret;
- ret = write_long_reg(devrec, REG_RFCON0, 0x03);
+ ret = regmap_write(devrec->regmap_long, REG_RFCON0, 0x03);
if (ret)
goto err_ret;
- ret = write_long_reg(devrec, REG_RFCON1, 0x01);
+ ret = regmap_write(devrec->regmap_long, REG_RFCON1, 0x01);
if (ret)
goto err_ret;
- ret = write_long_reg(devrec, REG_RFCON2, 0x80);
+ ret = regmap_write(devrec->regmap_long, REG_RFCON2, 0x80);
if (ret)
goto err_ret;
- ret = write_long_reg(devrec, REG_RFCON6, 0x90);
+ ret = regmap_write(devrec->regmap_long, REG_RFCON6, 0x90);
if (ret)
goto err_ret;
- ret = write_long_reg(devrec, REG_RFCON7, 0x80);
+ ret = regmap_write(devrec->regmap_long, REG_RFCON7, 0x80);
if (ret)
goto err_ret;
- ret = write_long_reg(devrec, REG_RFCON8, 0x10);
+ ret = regmap_write(devrec->regmap_long, REG_RFCON8, 0x10);
if (ret)
goto err_ret;
- ret = write_long_reg(devrec, REG_SLPCON1, 0x21);
+ ret = regmap_write(devrec->regmap_long, REG_SLPCON1, 0x21);
if (ret)
goto err_ret;
- ret = write_short_reg(devrec, REG_BBREG2, 0x80);
+ ret = regmap_write(devrec->regmap_short, REG_BBREG2, 0x80);
if (ret)
goto err_ret;
- ret = write_short_reg(devrec, REG_CCAEDTH, 0x60);
+ ret = regmap_write(devrec->regmap_short, REG_CCAEDTH, 0x60);
if (ret)
goto err_ret;
- ret = write_short_reg(devrec, REG_BBREG6, 0x40);
+ ret = regmap_write(devrec->regmap_short, REG_BBREG6, 0x40);
if (ret)
goto err_ret;
- ret = write_short_reg(devrec, REG_RFCTL, 0x04);
+ ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x04);
if (ret)
goto err_ret;
- ret = write_short_reg(devrec, REG_RFCTL, 0x0);
+ ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x0);
if (ret)
goto err_ret;
udelay(192);
/* Set RX Mode. RXMCR<1:0>: 0x0 normal, 0x1 promisc, 0x2 error */
- ret = read_short_reg(devrec, REG_RXMCR, &val);
- if (ret)
- goto err_ret;
-
- val &= ~0x3; /* Clear RX mode (normal) */
-
- ret = write_short_reg(devrec, REG_RXMCR, val);
+ ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 0x03, 0x00);
if (ret)
goto err_ret;
@@ -1057,22 +1012,20 @@ static int mrf24j40_hw_init(struct mrf24j40 *devrec)
/* Enable external amplifier.
* From MRF24J40MC datasheet section 1.3: Operation.
*/
- read_long_reg(devrec, REG_TESTMODE, &val);
- val |= 0x7; /* Configure GPIO 0-2 to control amplifier */
- write_long_reg(devrec, REG_TESTMODE, val);
+ regmap_update_bits(devrec->regmap_long, REG_TESTMODE, 0x07,
+ 0x07);
- read_short_reg(devrec, REG_TRISGPIO, &val);
- val |= 0x8; /* Set GPIO3 as output. */
- write_short_reg(devrec, REG_TRISGPIO, val);
+ /* Set GPIO3 as output. */
+ regmap_update_bits(devrec->regmap_short, REG_TRISGPIO, 0x08,
+ 0x08);
- read_short_reg(devrec, REG_GPIO, &val);
- val |= 0x8; /* Set GPIO3 HIGH to enable U5 voltage regulator */
- write_short_reg(devrec, REG_GPIO, val);
+ /* Set GPIO3 HIGH to enable U5 voltage regulator */
+ regmap_update_bits(devrec->regmap_short, REG_GPIO, 0x08, 0x08);
/* Reduce TX pwr to meet FCC requirements.
* From MRF24J40MC datasheet section 3.1.1
*/
- write_long_reg(devrec, REG_RFCON3, 0x28);
+ regmap_write(devrec->regmap_long, REG_RFCON3, 0x28);
}
return 0;
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-06 02:43:46 +0000