summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/feature-removal-schedule.txt9
-rw-r--r--Documentation/i2c/busses/i2c-voodoo362
-rw-r--r--drivers/i2c/busses/Kconfig16
-rw-r--r--drivers/i2c/busses/Makefile3
-rw-r--r--drivers/i2c/busses/i2c-voodoo3.c248
5 files changed, 0 insertions, 338 deletions
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index f613df8ec7bf..55169414f2f0 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -419,15 +419,6 @@ Who: Alex Chiang <achiang@hp.com>
---------------------------
-What: i2c-voodoo3 driver
-When: October 2009
-Why: Superseded by tdfxfb. I2C/DDC support used to live in a separate
- driver but this caused driver conflicts.
-Who: Jean Delvare <khali@linux-fr.org>
- Krzysztof Helt <krzysztof.h1@wp.pl>
-
----------------------------
-
What: CONFIG_RFKILL_INPUT
When: 2.6.33
Why: Should be implemented in userspace, policy daemon.
diff --git a/Documentation/i2c/busses/i2c-voodoo3 b/Documentation/i2c/busses/i2c-voodoo3
deleted file mode 100644
index 62d90a454d39..000000000000
--- a/Documentation/i2c/busses/i2c-voodoo3
+++ /dev/null
@@ -1,62 +0,0 @@
-Kernel driver i2c-voodoo3
-
-Supported adapters:
- * 3dfx Voodoo3 based cards
- * Voodoo Banshee based cards
-
-Authors:
- Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
- Ralph Metzler <rjkm@thp.uni-koeln.de>,
- Mark D. Studebaker <mdsxyz123@yahoo.com>
-
-Main contact: Philip Edelbrock <phil@netroedge.com>
-
-The code is based upon Ralph's test code (he did the hard stuff ;')
-
-Description
------------
-
-The 3dfx Voodoo3 chip contains two I2C interfaces (aka a I2C 'master' or
-'host').
-
-The first interface is used for DDC (Data Display Channel) which is a
-serial channel through the VGA monitor connector to a DDC-compliant
-monitor. This interface is defined by the Video Electronics Standards
-Association (VESA). The standards are available for purchase at
-http://www.vesa.org .
-
-The second interface is a general-purpose I2C bus. The intent by 3dfx was
-to allow manufacturers to add extra chips to the video card such as a
-TV-out chip such as the BT869 or possibly even I2C based temperature
-sensors like the ADM1021 or LM75.
-
-Stability
----------
-
-Seems to be stable on the test machine, but needs more testing on other
-machines. Simultaneous accesses of the DDC and I2C busses may cause errors.
-
-Supported Devices
------------------
-
-Specifically, this driver was written and tested on the '3dfx Voodoo3 AGP
-3000' which has a tv-out feature (s-video or composite). According to the
-docs and discussions, this code should work for any Voodoo3 based cards as
-well as Voodoo Banshee based cards. The DDC interface has been tested on a
-Voodoo Banshee card.
-
-Issues
-------
-
-Probably many, but it seems to work OK on my system. :')
-
-
-External Device Connection
---------------------------
-
-The digital video input jumpers give availability to the I2C bus.
-Specifically, pins 13 and 25 (bottom row middle, and bottom right-end) are
-the I2C clock and I2C data lines, respectively. +5V and GND are probably
-also easily available making the addition of extra I2C/SMBus devices easy
-to implement.
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index e8fe7f169e25..5f318ce29770 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -640,22 +640,6 @@ config I2C_TINY_USB
This driver can also be built as a module. If so, the module
will be called i2c-tiny-usb.
-comment "Graphics adapter I2C/DDC channel drivers"
- depends on PCI
-
-config I2C_VOODOO3
- tristate "Voodoo 3 (DEPRECATED)"
- depends on PCI
- select I2C_ALGOBIT
- help
- If you say yes to this option, support will be included for the
- Voodoo 3 I2C interface. This driver is deprecated and you should
- use the tdfxfb driver instead, which additionally provides
- framebuffer support.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-voodoo3.
-
comment "Other I2C/SMBus bus drivers"
config I2C_ACORN
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index ff937ac69f5b..302c551977bb 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -61,9 +61,6 @@ obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o
-# Graphics adapter I2C/DDC channel drivers
-obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
-
# Other I2C/SMBus bus drivers
obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
deleted file mode 100644
index 7663d57833a0..000000000000
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
- Ralph Metzler <rjkm@thp.uni-koeln.de>, and
- Mark D. Studebaker <mdsxyz123@yahoo.com>
-
- Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
- Simon Vogl
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* This interfaces to the I2C bus of the Voodoo3 to gain access to
- the BT869 and possibly other I2C devices. */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <asm/io.h>
-
-/* the only registers we use */
-#define REG 0x78
-#define REG2 0x70
-
-/* bit locations in the register */
-#define DDC_ENAB 0x00040000
-#define DDC_SCL_OUT 0x00080000
-#define DDC_SDA_OUT 0x00100000
-#define DDC_SCL_IN 0x00200000
-#define DDC_SDA_IN 0x00400000
-#define I2C_ENAB 0x00800000
-#define I2C_SCL_OUT 0x01000000
-#define I2C_SDA_OUT 0x02000000
-#define I2C_SCL_IN 0x04000000
-#define I2C_SDA_IN 0x08000000
-
-/* initialization states */
-#define INIT2 0x2
-#define INIT3 0x4
-
-/* delays */
-#define CYCLE_DELAY 10
-#define TIMEOUT (HZ / 2)
-
-
-static void __iomem *ioaddr;
-
-/* The voo GPIO registers don't have individual masks for each bit
- so we always have to read before writing. */
-
-static void bit_vooi2c_setscl(void *data, int val)
-{
- unsigned int r;
- r = readl(ioaddr + REG);
- if (val)
- r |= I2C_SCL_OUT;
- else
- r &= ~I2C_SCL_OUT;
- writel(r, ioaddr + REG);
- readl(ioaddr + REG); /* flush posted write */
-}
-
-static void bit_vooi2c_setsda(void *data, int val)
-{
- unsigned int r;
- r = readl(ioaddr + REG);
- if (val)
- r |= I2C_SDA_OUT;
- else
- r &= ~I2C_SDA_OUT;
- writel(r, ioaddr + REG);
- readl(ioaddr + REG); /* flush posted write */
-}
-
-/* The GPIO pins are open drain, so the pins always remain outputs.
- We rely on the i2c-algo-bit routines to set the pins high before
- reading the input from other chips. */
-
-static int bit_vooi2c_getscl(void *data)
-{
- return (0 != (readl(ioaddr + REG) & I2C_SCL_IN));
-}
-
-static int bit_vooi2c_getsda(void *data)
-{
- return (0 != (readl(ioaddr + REG) & I2C_SDA_IN));
-}
-
-static void bit_vooddc_setscl(void *data, int val)
-{
- unsigned int r;
- r = readl(ioaddr + REG);
- if (val)
- r |= DDC_SCL_OUT;
- else
- r &= ~DDC_SCL_OUT;
- writel(r, ioaddr + REG);
- readl(ioaddr + REG); /* flush posted write */
-}
-
-static void bit_vooddc_setsda(void *data, int val)
-{
- unsigned int r;
- r = readl(ioaddr + REG);
- if (val)
- r |= DDC_SDA_OUT;
- else
- r &= ~DDC_SDA_OUT;
- writel(r, ioaddr + REG);
- readl(ioaddr + REG); /* flush posted write */
-}
-
-static int bit_vooddc_getscl(void *data)
-{
- return (0 != (readl(ioaddr + REG) & DDC_SCL_IN));
-}
-
-static int bit_vooddc_getsda(void *data)
-{
- return (0 != (readl(ioaddr + REG) & DDC_SDA_IN));
-}
-
-static int config_v3(struct pci_dev *dev)
-{
- unsigned long cadr;
-
- /* map Voodoo3 memory */
- cadr = dev->resource[0].start;
- cadr &= PCI_BASE_ADDRESS_MEM_MASK;
- ioaddr = ioremap_nocache(cadr, 0x1000);
- if (ioaddr) {
- writel(0x8160, ioaddr + REG2);
- writel(0xcffc0020, ioaddr + REG);
- dev_info(&dev->dev, "Using Banshee/Voodoo3 I2C device at %p\n", ioaddr);
- return 0;
- }
- return -ENODEV;
-}
-
-static struct i2c_algo_bit_data voo_i2c_bit_data = {
- .setsda = bit_vooi2c_setsda,
- .setscl = bit_vooi2c_setscl,
- .getsda = bit_vooi2c_getsda,
- .getscl = bit_vooi2c_getscl,
- .udelay = CYCLE_DELAY,
- .timeout = TIMEOUT
-};
-
-static struct i2c_adapter voodoo3_i2c_adapter = {
- .owner = THIS_MODULE,
- .name = "I2C Voodoo3/Banshee adapter",
- .algo_data = &voo_i2c_bit_data,
-};
-
-static struct i2c_algo_bit_data voo_ddc_bit_data = {
- .setsda = bit_vooddc_setsda,
- .setscl = bit_vooddc_setscl,
- .getsda = bit_vooddc_getsda,
- .getscl = bit_vooddc_getscl,
- .udelay = CYCLE_DELAY,
- .timeout = TIMEOUT
-};
-
-static struct i2c_adapter voodoo3_ddc_adapter = {
- .owner = THIS_MODULE,
- .class = I2C_CLASS_DDC,
- .name = "DDC Voodoo3/Banshee adapter",
- .algo_data = &voo_ddc_bit_data,
-};
-
-static struct pci_device_id voodoo3_ids[] __devinitdata = {
- { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO3) },
- { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_BANSHEE) },
- { 0, }
-};
-
-MODULE_DEVICE_TABLE (pci, voodoo3_ids);
-
-static int __devinit voodoo3_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
- int retval;
-
- retval = config_v3(dev);
- if (retval)
- return retval;
-
- /* set up the sysfs linkage to our parent device */
- voodoo3_i2c_adapter.dev.parent = &dev->dev;
- voodoo3_ddc_adapter.dev.parent = &dev->dev;
-
- retval = i2c_bit_add_bus(&voodoo3_i2c_adapter);
- if (retval)
- return retval;
- retval = i2c_bit_add_bus(&voodoo3_ddc_adapter);
- if (retval)
- i2c_del_adapter(&voodoo3_i2c_adapter);
- return retval;
-}
-
-static void __devexit voodoo3_remove(struct pci_dev *dev)
-{
- i2c_del_adapter(&voodoo3_i2c_adapter);
- i2c_del_adapter(&voodoo3_ddc_adapter);
- iounmap(ioaddr);
-}
-
-static struct pci_driver voodoo3_driver = {
- .name = "voodoo3_smbus",
- .id_table = voodoo3_ids,
- .probe = voodoo3_probe,
- .remove = __devexit_p(voodoo3_remove),
-};
-
-static int __init i2c_voodoo3_init(void)
-{
- return pci_register_driver(&voodoo3_driver);
-}
-
-static void __exit i2c_voodoo3_exit(void)
-{
- pci_unregister_driver(&voodoo3_driver);
-}
-
-
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
- "Philip Edelbrock <phil@netroedge.com>, "
- "Ralph Metzler <rjkm@thp.uni-koeln.de>, "
- "and Mark D. Studebaker <mdsxyz123@yahoo.com>");
-MODULE_DESCRIPTION("Voodoo3 I2C/SMBus driver");
-MODULE_LICENSE("GPL");
-
-module_init(i2c_voodoo3_init);
-module_exit(i2c_voodoo3_exit);