diff options
| -rw-r--r-- | arch/arm/mach-s3c2410/include/mach/gpio-fns.h | 35 | ||||
| -rw-r--r-- | arch/arm/plat-s3c24xx/gpio.c | 48 |
2 files changed, 24 insertions, 59 deletions
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h index 035a493952db..f50c2a5f7ab3 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h @@ -10,14 +10,28 @@ * published by the Free Software Foundation. */ +#ifndef __MACH_GPIO_FNS_H +#define __MACH_GPIO_FNS_H __FILE__ + /* These functions are in the to-be-removed category and it is strongly * encouraged not to use these in new code. They will be marked deprecated * very soon. * * Most of the functionality can be either replaced by the gpiocfg calls * for the s3c platform or by the generic GPIOlib API. + * + * As of 2.6.35-rc, these will be removed, with the few drivers using them + * either replaced or given a wrapper until the calls can be removed. */ +#include <plat/gpio-cfg.h> + +static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg) +{ + /* 1:1 mapping between cfgpin and setcfg calls at the moment */ + s3c_gpio_cfgpin(pin, cfg); +} + /* external functions for GPIO support * * These allow various different clients to access the same GPIO @@ -25,17 +39,6 @@ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. */ -/* s3c2410_gpio_cfgpin - * - * set the configuration of the given pin to the value passed. - * - * eg: - * s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0); - * s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1); -*/ - -extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function); - extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); /* s3c2410_gpio_getirq @@ -73,6 +76,14 @@ extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, /* s3c2410_gpio_pullup * + * This call should be replaced with s3c_gpio_setpull(). + * + * As a note, there is currently no distinction between pull-up and pull-down + * in the s3c24xx series devices with only an on/off configuration. + */ + +/* s3c2410_gpio_pullup + * * configure the pull-up control on the given pin * * to = 1 => disable the pull-up @@ -101,3 +112,5 @@ extern int s3c2410_gpio_getpull(unsigned int pin); extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); extern unsigned int s3c2410_gpio_getpin(unsigned int pin); + +#endif /* __MACH_GPIO_FNS_H */ diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c index 5467470badfd..0b3b2cb228ab 100644 --- a/arch/arm/plat-s3c24xx/gpio.c +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -34,54 +34,6 @@ #include <mach/regs-gpio.h> -void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long mask; - unsigned long con; - unsigned long flags; - - if (pin < S3C2410_GPIO_BANKB) { - mask = 1 << S3C2410_GPIO_OFFSET(pin); - } else { - mask = 3 << S3C2410_GPIO_OFFSET(pin)*2; - } - - switch (function) { - case S3C2410_GPIO_LEAVE: - mask = 0; - function = 0; - break; - - case S3C2410_GPIO_INPUT: - case S3C2410_GPIO_OUTPUT: - case S3C2410_GPIO_SFN2: - case S3C2410_GPIO_SFN3: - if (pin < S3C2410_GPIO_BANKB) { - function -= 1; - function &= 1; - function <<= S3C2410_GPIO_OFFSET(pin); - } else { - function &= 3; - function <<= S3C2410_GPIO_OFFSET(pin)*2; - } - } - - /* modify the specified register wwith IRQs off */ - - local_irq_save(flags); - - con = __raw_readl(base + 0x00); - con &= ~mask; - con |= function; - - __raw_writel(con, base + 0x00); - - local_irq_restore(flags); -} - -EXPORT_SYMBOL(s3c2410_gpio_cfgpin); - unsigned int s3c2410_gpio_getcfg(unsigned int pin) { void __iomem *base = S3C24XX_GPIO_BASE(pin); |