diff options
27 files changed, 1116 insertions, 513 deletions
diff --git a/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt b/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt new file mode 100644 index 000000000000..cd55b52548e4 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt @@ -0,0 +1,29 @@ +* Cirrus Logic CLPS711X Timer Counter + +Required properties: +- compatible: Shall contain "cirrus,clps711x-timer". +- reg : Address and length of the register set. +- interrupts: The interrupt number of the timer. +- clocks : phandle of timer reference clock. + +Note: Each timer should have an alias correctly numbered in "aliases" node. + +Example: + aliases { + timer0 = &timer1; + timer1 = &timer2; + }; + + timer1: timer@80000300 { + compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer"; + reg = <0x80000300 0x4>; + interrupts = <8>; + clocks = <&clks 5>; + }; + + timer2: timer@80000340 { + compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer"; + reg = <0x80000340 0x4>; + interrupts = <9>; + clocks = <&clks 6>; + }; diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt new file mode 100644 index 000000000000..7c4408ff4b83 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt @@ -0,0 +1,17 @@ +Mediatek MT6577, MT6572 and MT6589 Timers +--------------------------------------- + +Required properties: +- compatible: Should be "mediatek,mt6577-timer" +- reg: Should contain location and length for timers register. +- clocks: Clocks driving the timer hardware. This list should include two + clocks. The order is system clock and as second clock the RTC clock. + +Examples: + + timer@10008000 { + compatible = "mediatek,mt6577-timer"; + reg = <0x10008000 0x80>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>; + clocks = <&system_clk>, <&rtc_clk>; + }; diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt new file mode 100644 index 000000000000..a17418b0ece3 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt @@ -0,0 +1,47 @@ +* Renesas R-Car Compare Match Timer (CMT) + +The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock +inputs and programmable compare match. + +Channels share hardware resources but their counter and compare match value +are independent. A particular CMT instance can implement only a subset of the +channels supported by the CMT model. Channel indices represent the hardware +position of the channel in the CMT and don't match the channel numbers in the +datasheets. + +Required Properties: + + - compatible: must contain one of the following. + - "renesas,cmt-32" for the 32-bit CMT + (CMT0 on sh7372, sh73a0 and r8a7740) + - "renesas,cmt-32-fast" for the 32-bit CMT with fast clock support + (CMT[234] on sh7372, sh73a0 and r8a7740) + - "renesas,cmt-48" for the 48-bit CMT + (CMT1 on sh7372, sh73a0 and r8a7740) + - "renesas,cmt-48-gen2" for the second generation 48-bit CMT + (CMT[01] on r8a73a4, r8a7790 and r8a7791) + + - reg: base address and length of the registers block for the timer module. + - interrupts: interrupt-specifier for the timer, one per channel. + - clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. + - clock-names: must contain "fck" for the functional clock. + + - renesas,channels-mask: bitmask of the available channels. + + +Example: R8A7790 (R-Car H2) CMT0 node + + CMT0 on R8A7790 implements hardware channels 5 and 6 only and names + them channels 0 and 1 in the documentation. + + cmt0: timer@ffca0000 { + compatible = "renesas,cmt-48-gen2"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, + <0 142 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7790_CLK_CMT0>; + clock-names = "fck"; + + renesas,channels-mask = <0x60>; + }; diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt new file mode 100644 index 000000000000..917453f826bc --- /dev/null +++ b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt @@ -0,0 +1,39 @@ +* Renesas R-Car Multi-Function Timer Pulse Unit 2 (MTU2) + +The MTU2 is a multi-purpose, multi-channel timer/counter with configurable +clock inputs and programmable compare match. + +Channels share hardware resources but their counter and compare match value +are independent. The MTU2 hardware supports five channels indexed from 0 to 4. + +Required Properties: + + - compatible: must contain "renesas,mtu2" + + - reg: base address and length of the registers block for the timer module. + + - interrupts: interrupt specifiers for the timer, one for each entry in + interrupt-names. + - interrupt-names: must contain one entry named "tgi?a" for each enabled + channel, where "?" is the channel index expressed as one digit from "0" to + "4". + + - clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. + - clock-names: must contain "fck" for the functional clock. + + +Example: R7S72100 (RZ/A1H) MTU2 node + + mtu2: timer@fcff0000 { + compatible = "renesas,mtu2"; + reg = <0xfcff0000 0x400>; + interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>, + <0 146 IRQ_TYPE_LEVEL_HIGH>, + <0 150 IRQ_TYPE_LEVEL_HIGH>, + <0 154 IRQ_TYPE_LEVEL_HIGH>, + <0 159 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tgi0a", "tgi1a", "tgi2a", "tgi3a", "tgi4a"; + clocks = <&mstp3_clks R7S72100_CLK_MTU2>; + clock-names = "fck"; + }; diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt new file mode 100644 index 000000000000..425d0c5f4aee --- /dev/null +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt @@ -0,0 +1,39 @@ +* Renesas R-Car Timer Unit (TMU) + +The TMU is a 32-bit timer/counter with configurable clock inputs and +programmable compare match. + +Channels share hardware resources but their counter and compare match value +are independent. The TMU hardware supports up to three channels. + +Required Properties: + + - compatible: must contain "renesas,tmu" + + - reg: base address and length of the registers block for the timer module. + + - interrupts: interrupt-specifier for the timer, one per channel. + + - clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. + - clock-names: must contain "fck" for the functional clock. + +Optional Properties: + + - #renesas,channels: number of channels implemented by the timer, must be 2 + or 3 (if not specified the value defaults to 3). + + +Example: R8A7779 (R-Car H1) TMU0 node + + tmu0: timer@ffd80000 { + compatible = "renesas,tmu"; + reg = <0xffd80000 0x30>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, + <0 33 IRQ_TYPE_LEVEL_HIGH>, + <0 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_TMU0>; + clock-names = "fck"; + + #renesas,channels = <3>; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 46a311e728a8..dd5bce848cef 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -77,6 +77,7 @@ lsi LSI Corp. (LSI Logic) lltc Linear Technology Corporation marvell Marvell Technology Group Ltd. maxim Maxim Integrated Products +mediatek MediaTek Inc. micrel Micrel Inc. microchip Microchip Technology Inc. mosaixtech Mosaix Technologies, Inc. diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 245058b3b0ef..05a71511ab3c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -634,6 +634,7 @@ config ARCH_PXA select AUTO_ZRELADDR select CLKDEV_LOOKUP select CLKSRC_MMIO + select CLKSRC_OF select GENERIC_CLOCKEVENTS select GPIO_PXA select HAVE_IDE diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 648867a8caa8..2fe1824c6dcb 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -4,7 +4,7 @@ # Common support (must be linked before board specific support) obj-y += clock.o devices.o generic.o irq.o \ - time.o reset.o + reset.o obj-$(CONFIG_PM) += pm.o sleep.o standby.o # Generic drivers that other drivers may depend upon diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 42254175fcf4..6f38e1af45af 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -25,11 +25,13 @@ #include <asm/mach/map.h> #include <asm/mach-types.h> +#include <mach/irqs.h> #include <mach/reset.h> #include <mach/smemc.h> #include <mach/pxa3xx-regs.h> #include "generic.h" +#include <clocksource/pxa.h> void clear_reset_status(unsigned int mask) { @@ -57,6 +59,15 @@ unsigned long get_clock_tick_rate(void) EXPORT_SYMBOL(get_clock_tick_rate); /* + * For non device-tree builds, keep legacy timer init + */ +void pxa_timer_init(void) +{ + pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000), + get_clock_tick_rate()); +} + +/* * Get the clock frequency as reflected by CCCR and the turbo flag. * We assume these values have been applied via a fcs. * If info is not 0 we also display the current settings. diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c deleted file mode 100644 index fca174e3865d..000000000000 --- a/arch/arm/mach-pxa/time.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * arch/arm/mach-pxa/time.c - * - * PXA clocksource, clockevents, and OST interrupt handlers. - * Copyright (c) 2007 by Bill Gatliff <bgat@billgatliff.com>. - * - * Derived from Nicolas Pitre's PXA timer handler Copyright (c) 2001 - * by MontaVista Software, Inc. (Nico, your code rocks!) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/clockchips.h> -#include <linux/sched_clock.h> - -#include <asm/div64.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <mach/regs-ost.h> -#include <mach/irqs.h> - -/* - * This is PXA's sched_clock implementation. This has a resolution - * of at least 308 ns and a maximum value of 208 days. - * - * The return value is guaranteed to be monotonic in that range as - * long as there is always less than 582 seconds between successive - * calls to sched_clock() which should always be the case in practice. - */ - -static u64 notrace pxa_read_sched_clock(void) -{ - return readl_relaxed(OSCR); -} - - -#define MIN_OSCR_DELTA 16 - -static irqreturn_t -pxa_ost0_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *c = dev_id; - - /* Disarm the compare/match, signal the event. */ - writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); - writel_relaxed(OSSR_M0, OSSR); - c->event_handler(c); - - return IRQ_HANDLED; -} - -static int -pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev) -{ - unsigned long next, oscr; - - writel_relaxed(readl_relaxed(OIER) | OIER_E0, OIER); - next = readl_relaxed(OSCR) + delta; - writel_relaxed(next, OSMR0); - oscr = readl_relaxed(OSCR); - - return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; -} - -static void -pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) -{ - switch (mode) { - case CLOCK_EVT_MODE_ONESHOT: - writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); - writel_relaxed(OSSR_M0, OSSR); - break; - - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - /* initializing, released, or preparing for suspend */ - writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER); - writel_relaxed(OSSR_M0, OSSR); - break; - - case CLOCK_EVT_MODE_RESUME: - case CLOCK_EVT_MODE_PERIODIC: - break; - } -} - -#ifdef CONFIG_PM -static unsigned long osmr[4], oier, oscr; - -static void pxa_timer_suspend(struct clock_event_device *cedev) -{ - osmr[0] = readl_relaxed(OSMR0); - osmr[1] = readl_relaxed(OSMR1); - osmr[2] = readl_relaxed(OSMR2); - osmr[3] = readl_relaxed(OSMR3); - oier = readl_relaxed(OIER); - oscr = readl_relaxed(OSCR); -} - -static void pxa_timer_resume(struct clock_event_device *cedev) -{ - /* - * Ensure that we have at least MIN_OSCR_DELTA between match - * register 0 and the OSCR, to guarantee that we will receive - * the one-shot timer interrupt. We adjust OSMR0 in preference - * to OSCR to guarantee that OSCR is monotonically incrementing. - */ - if (osmr[0] - oscr < MIN_OSCR_DELTA) - osmr[0] += MIN_OSCR_DELTA; - - writel_relaxed(osmr[0], OSMR0); - writel_relaxed(osmr[1], OSMR1); - writel_relaxed(osmr[2], OSMR2); - writel_relaxed(osmr[3], OSMR3); - writel_relaxed(oier, OIER); - writel_relaxed(oscr, OSCR); -} -#else -#define pxa_timer_suspend NULL -#define pxa_timer_resume NULL -#endif - -static struct clock_event_device ckevt_pxa_osmr0 = { - .name = "osmr0", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .set_next_event = pxa_osmr0_set_next_event, - .set_mode = pxa_osmr0_set_mode, - .suspend = pxa_timer_suspend, - .resume = pxa_timer_resume, -}; - -static struct irqaction pxa_ost0_irq = { - .name = "ost0", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = pxa_ost0_interrupt, - .dev_id = &ckevt_pxa_osmr0, -}; - -void __init pxa_timer_init(void) -{ - unsigned long clock_tick_rate = get_clock_tick_rate(); - - writel_relaxed(0, OIER); - writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); - - sched_clock_register(pxa_read_sched_clock, 32, clock_tick_rate); - - ckevt_pxa_osmr0.cpumask = cpumask_of(0); - - setup_irq(IRQ_OST0, &pxa_ost0_irq); - - clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32, - clocksource_mmio_readl_up); - clockevents_config_and_register(&ckevt_pxa_osmr0, clock_tick_rate, - MIN_OSCR_DELTA * 2, 0x7fffffff); -} diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 6a1151840510..cfd6519df661 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -127,6 +127,7 @@ config CLKSRC_METAG_GENERIC config CLKSRC_EXYNOS_MCT def_bool y if ARCH_EXYNOS + depends on !ARM64 help Support for Multi Core Timer controller on Exynos SoCs. @@ -151,6 +152,11 @@ config VF_PIT_TIMER config SYS_SUPPORTS_SH_CMT bool +config MTK_TIMER + select CLKSRC_OF + select CLKSRC_MMIO + bool + config SYS_SUPPORTS_SH_MTU2 bool @@ -175,7 +181,7 @@ config SH_TIMER_MTU2 default SYS_SUPPORTS_SH_MTU2 help This enables build of a clockevent driver for the Multi-Function - Timer Pulse Unit 2 (TMU2) hardware available on SoCs from Renesas. + Timer Pulse Unit 2 (MTU2) hardware available on SoCs from Renesas. This hardware comes with 16 bit-timer registers. config SH_TIMER_TMU @@ -189,7 +195,7 @@ config SH_TIMER_TMU config EM_TIMER_STI bool "Renesas STI timer driver" if COMPILE_TEST - depends on GENERIC_CLOCKEVENTS + depends on GENERIC_CLOCKEVENTS && HAS_IOMEM default SYS_SUPPORTS_EM_STI help This enables build of a clocksource and clockevent driver for diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 800b1303c236..7fd9fd1dff42 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -16,9 +16,11 @@ obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o obj-$(CONFIG_ORION_TIMER) += time-orion.o obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o +obj-$(CONFIG_ARCH_CLPS711X) += clps711x-timer.o obj-$(CONFIG_ARCH_MARCO) += timer-marco.o obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o obj-$(CONFIG_ARCH_MXS) += mxs_timer.o +obj-$(CONFIG_ARCH_PXA) += pxa_timer.o obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o obj-$(CONFIG_ARCH_U300) += timer-u300.o obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o @@ -34,6 +36,7 @@ obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o obj-$(CONFIG_FSL_FTM_TIMER) += fsl_ftm_timer.o obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o +obj-$(CONFIG_MTK_TIMER) += mtk_timer.o obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o diff --git a/drivers/clocksource/clps711x-timer.c b/drivers/clocksource/clps711x-timer.c new file mode 100644 index 000000000000..d83ec1f2fddc --- /dev/null +++ b/drivers/clocksource/clps711x-timer.c @@ -0,0 +1,131 @@ +/* + * Cirrus Logic CLPS711X clocksource driver + * + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/clocksource.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/sched_clock.h> +#include <linux/slab.h> + +enum { + CLPS711X_CLKSRC_CLOCKSOURCE, + CLPS711X_CLKSRC_CLOCKEVENT, +}; + +static void __iomem *tcd; + +static u64 notrace clps711x_sched_clock_read(void) +{ + return ~readw(tcd); +} + +static int __init _clps711x_clksrc_init(struct clk *clock, void __iomem *base) +{ + unsigned long rate; + + if (!base) + return -ENOMEM; + if (IS_ERR(clock)) + return PTR_ERR(clock); + + rate = clk_get_rate(clock); + + tcd = base; + + clocksource_mmio_init(tcd, "clps711x-clocksource", rate, 300, 16, + clocksource_mmio_readw_down); + + sched_clock_register(clps711x_sched_clock_read, 16, rate); + + return 0; +} + +static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static void clps711x_clockevent_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ +} + +static int __init _clps711x_clkevt_init(struct clk *clock, void __iomem *base, + unsigned int irq) +{ + struct clock_event_device *clkevt; + unsigned long rate; + + if (!irq) + return -EINVAL; + if (!base) + return -ENOMEM; + if (IS_ERR(clock)) + return PTR_ERR(clock); + + clkevt = kzalloc(sizeof(*clkevt), GFP_KERNEL); + if (!clkevt) + return -ENOMEM; + + rate = clk_get_rate(clock); + + /* Set Timer prescaler */ + writew(DIV_ROUND_CLOSEST(rate, HZ), base); + + clkevt->name = "clps711x-clockevent"; + clkevt->rating = 300; + clkevt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_C3STOP; + clkevt->set_mode = clps711x_clockevent_set_mode; + clkevt->cpumask = cpumask_of(0); + clockevents_config_and_register(clkevt, HZ, 0, 0); + + return request_irq(irq, clps711x_timer_interrupt, IRQF_TIMER, + "clps711x-timer", clkevt); +} + +void __init clps711x_clksrc_init(void __iomem *tc1_base, void __iomem *tc2_base, + unsigned int irq) +{ + struct clk *tc1 = clk_get_sys("clps711x-timer.0", NULL); + struct clk *tc2 = clk_get_sys("clps711x-timer.1", NULL); + + BUG_ON(_clps711x_clksrc_init(tc1, tc1_base)); + BUG_ON(_clps711x_clkevt_init(tc2, tc2_base, irq)); +} + +#ifdef CONFIG_CLKSRC_OF +static void __init clps711x_timer_init(struct device_node *np) +{ + unsigned int irq = irq_of_parse_and_map(np, 0); + struct clk *clock = of_clk_get(np, 0); + void __iomem *base = of_iomap(np, 0); + + switch (of_alias_get_id(np, "timer")) { + case CLPS711X_CLKSRC_CLOCKSOURCE: + BUG_ON(_clps711x_clksrc_init(clock, base)); + break; + case CLPS711X_CLKSRC_CLOCKEVENT: + BUG_ON(_clps711x_clkevt_init(clock, base, irq)); + break; + default: + break; + } +} +CLOCKSOURCE_OF_DECLARE(clps711x, "cirrus,clps711x-timer", clps711x_timer_init); +#endif diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index ab51bf20a3ed..9403061a2acc 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -94,7 +94,7 @@ static void exynos4_mct_write(unsigned int value, unsigned long offset) u32 mask; u32 i; - __raw_writel(value, reg_base + offset); + writel_relaxed(value, reg_base + offset); if (likely(offset >= EXYNOS4_MCT_L_BASE(0))) { stat_addr = (offset & ~EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET; @@ -144,8 +144,8 @@ static void exynos4_mct_write(unsigned int value, unsigned long offset) /* Wait maximum 1 ms until written values are applied */ for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++) - if (__raw_readl(reg_base + stat_addr) & mask) { - __raw_writel(mask, reg_base + stat_addr); + if (readl_relaxed(reg_base + stat_addr) & mask) { + writel_relaxed(mask, reg_base + stat_addr); return; } @@ -157,28 +157,51 @@ static void exynos4_mct_frc_start(void) { u32 reg; - reg = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON); + reg = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON); reg |= MCT_G_TCON_START; exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON); } -static cycle_t notrace _exynos4_frc_read(void) +/** + * exynos4_read_count_64 - Read all 64-bits of the global counter + * + * This will read all 64-bits of the global counter taking care to make sure + * that the upper and lower half match. Note that reading the MCT can be quite + * slow (hundreds of nanoseconds) so you should use the 32-bit (lower half + * only) version when possible. + * + * Returns the number of cycles in the global counter. + */ +static u64 exynos4_read_count_64(void) { unsigned int lo, hi; - u32 hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U); + u32 hi2 = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_U); do { hi = hi2; - lo = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_L); - hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U); + lo = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_L); + hi2 = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_U); } while (hi != hi2); return ((cycle_t)hi << 32) | lo; } +/** + * exynos4_read_count_32 - Read the lower 32-bits of the global counter + * + * This will read just the lower 32-bits of the global counter. This is marked + * as notrace so it can be used by the scheduler clock. + * + * Returns the number of cycles in the global counter (lower 32 bits). + */ +static u32 notrace exynos4_read_count_32(void) +{ + return readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_L); +} + static cycle_t exynos4_frc_read(struct clocksource *cs) { - return _exynos4_frc_read(); + return exynos4_read_count_32(); } static void exynos4_frc_resume(struct clocksource *cs) @@ -190,21 +213,23 @@ struct clocksource mct_frc = { .name = "mct-frc", .rating = 400, .read = exynos4_frc_read, - .mask = CLOCKSOURCE_MASK(64), + .mask = CLOCKSOURCE_MASK(32), .flags = CLOCK_SOURCE_IS_CONTINUOUS, .resume = exynos4_frc_resume, }; static u64 notrace exynos4_read_sched_clock(void) { - return _exynos4_frc_read(); + return exynos4_read_count_32(); } static struct delay_timer exynos4_delay_timer; static cycles_t exynos4_read_current_timer(void) { - return _exynos4_frc_read(); + BUILD_BUG_ON_MSG(sizeof(cycles_t) != sizeof(u32), + "cycles_t needs to move to 32-bit for ARM64 usage"); + return exynos4_read_count_32(); } static void __init exynos4_clocksource_init(void) @@ -218,14 +243,14 @@ static void __init exynos4_clocksource_init(void) if (clocksource_register_hz(&mct_frc, clk_rate)) panic("%s: can't register clocksource\n", mct_frc.name); - sched_clock_register(exynos4_read_sched_clock, 64, clk_rate); + sched_clock_register(exynos4_read_sched_clock, 32, clk_rate); } static void exynos4_mct_comp0_stop(void) { unsigned int tcon; - tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON); + tcon = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON); tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC); exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON); @@ -238,14 +263,14 @@ static void exynos4_mct_comp0_start(enum clock_event_mode mode, unsigned int tcon; cycle_t comp_cycle; - tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON); + tcon = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON); if (mode == CLOCK_EVT_MODE_PERIODIC) { tcon |= MCT_G_TCON_COMP0_AUTO_INC; exynos4_mct_write(cycles, EXYNOS4_MCT_G_COMP0_ADD_INCR); } - comp_cycle = exynos4_frc_read(&mct_frc) + cycles; + comp_cycle = exynos4_read_count_64() + cycles; exynos4_mct_write((u32)comp_cycle, EXYNOS4_MCT_G_COMP0_L); exynos4_mct_write((u32)(comp_cycle >> 32), EXYNOS4_MCT_G_COMP0_U); @@ -327,7 +352,7 @@ static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt) unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START; unsigned long offset = mevt->base + MCT_L_TCON_OFFSET; - tmp = __raw_readl(reg_base + offset); + tmp = readl_relaxed(reg_base + offset); if (tmp & mask) { tmp &= ~mask; exynos4_mct_write(tmp, offset); @@ -349,7 +374,7 @@ static void exynos4_mct_tick_start(unsigned long cycles, /* enable MCT tick interrupt */ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET); - tmp = __raw_readl(reg_base + mevt->base + MCT_L_TCON_OFFSET); + tmp = readl_relaxed(reg_base + mevt->base + MCT_L_TCON_OFFSET); tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START | MCT_L_TCON_INTERVAL_MODE; exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET); @@ -401,7 +426,7 @@ static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt) exynos4_mct_tick_stop(mevt); /* Clear the MCT tick interrupt */ - if (__raw_readl(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) { + if (readl_relaxed(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) { exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET); return 1; } else { diff --git a/drivers/clocksource/mtk_timer.c b/drivers/clocksource/mtk_timer.c new file mode 100644 index 000000000000..32a3d25795d3 --- /dev/null +++ b/drivers/clocksource/mtk_timer.c @@ -0,0 +1,261 @@ +/* + * Mediatek SoCs General-Purpose Timer handling. + * + * Copyright (C) 2014 Matthias Brugger + * + * Matthias Brugger <matthias.bgg@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqreturn.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/slab.h> + +#define GPT_IRQ_EN_REG 0x00 +#define GPT_IRQ_ENABLE(val) BIT((val) - 1) +#define GPT_IRQ_ACK_REG 0x08 +#define GPT_IRQ_ACK(val) BIT((val) - 1) + +#define TIMER_CTRL_REG(val) (0x10 * (val)) +#define TIMER_CTRL_OP(val) (((val) & 0x3) << 4) +#define TIMER_CTRL_OP_ONESHOT (0) +#define TIMER_CTRL_OP_REPEAT (1) +#define TIMER_CTRL_OP_FREERUN (3) +#define TIMER_CTRL_CLEAR (2) +#define TIMER_CTRL_ENABLE (1) +#define TIMER_CTRL_DISABLE (0) + +#define TIMER_CLK_REG(val) (0x04 + (0x10 * (val))) +#define TIMER_CLK_SRC(val) (((val) & 0x1) << 4) +#define TIMER_CLK_SRC_SYS13M (0) +#define TIMER_CLK_SRC_RTC32K (1) +#define TIMER_CLK_DIV1 (0x0) +#define TIMER_CLK_DIV2 (0x1) + +#define TIMER_CNT_REG(val) (0x08 + (0x10 * (val))) +#define TIMER_CMP_REG(val) (0x0C + (0x10 * (val))) + +#define GPT_CLK_EVT 1 +#define GPT_CLK_SRC 2 + +struct mtk_clock_event_device { + void __iomem *gpt_base; + u32 ticks_per_jiffy; + struct clock_event_device dev; +}; + +static inline struct mtk_clock_event_device *to_mtk_clk( + struct clock_event_device *c) +{ + return container_of(c, struct mtk_clock_event_device, dev); +} + +static void mtk_clkevt_time_stop(struct mtk_clock_event_device *evt, u8 timer) +{ + u32 val; + + val = readl(evt->gpt_base + TIMER_CTRL_REG(timer)); + writel(val & ~TIMER_CTRL_ENABLE, evt->gpt_base + + TIMER_CTRL_REG(timer)); +} + +static void mtk_clkevt_time_setup(struct mtk_clock_event_device *evt, + unsigned long delay, u8 timer) +{ + writel(delay, evt->gpt_base + TIMER_CMP_REG(timer)); +} + +static void mtk_clkevt_time_start(struct mtk_clock_event_device *evt, + bool periodic, u8 timer) +{ + u32 val; + + /* Acknowledge interrupt */ + writel(GPT_IRQ_ACK(timer), evt->gpt_base + GPT_IRQ_ACK_REG); + + val = readl(evt->gpt_base + TIMER_CTRL_REG(timer)); + + /* Clear 2 bit timer operation mode field */ + val &= ~TIMER_CTRL_OP(0x3); + + if (periodic) + val |= TIMER_CTRL_OP(TIMER_CTRL_OP_REPEAT); + else + val |= TIMER_CTRL_OP(TIMER_CTRL_OP_ONESHOT); + + writel(val | TIMER_CTRL_ENABLE | TIMER_CTRL_CLEAR, + evt->gpt_base + TIMER_CTRL_REG(timer)); +} + +static void mtk_clkevt_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + struct mtk_clock_event_device *evt = to_mtk_clk(clk); + + mtk_clkevt_time_stop(evt, GPT_CLK_EVT); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + mtk_clkevt_time_setup(evt, evt->ticks_per_jiffy, GPT_CLK_EVT); + mtk_clkevt_time_start(evt, true, GPT_CLK_EVT); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* Timer is enabled in set_next_event */ + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + /* No more interrupts will occur as source is disabled */ + break; + } +} + +static int mtk_clkevt_next_event(unsigned long event, + struct clock_event_device *clk) +{ + struct mtk_clock_event_device *evt = to_mtk_clk(clk); + + mtk_clkevt_time_stop(evt, GPT_CLK_EVT); + mtk_clkevt_time_setup(evt, event, GPT_CLK_EVT); + mtk_clkevt_time_start(evt, false, GPT_CLK_EVT); + + return 0; +} + +static irqreturn_t mtk_timer_interrupt(int irq, void *dev_id) +{ + struct mtk_clock_event_device *evt = dev_id; + + /* Acknowledge timer0 irq */ + writel(GPT_IRQ_ACK(GPT_CLK_EVT), evt->gpt_base + GPT_IRQ_ACK_REG); + evt->dev.event_handler(&evt->dev); + + return IRQ_HANDLED; +} + +static void mtk_timer_global_reset(struct mtk_clock_event_device *evt) +{ + /* Disable all interrupts */ + writel(0x0, evt->gpt_base + GPT_IRQ_EN_REG); + /* Acknowledge all interrupts */ + writel(0x3f, evt->gpt_base + GPT_IRQ_ACK_REG); +} + +static void +mtk_timer_setup(struct mtk_clock_event_device *evt, u8 timer, u8 option) +{ + writel(TIMER_CTRL_CLEAR | TIMER_CTRL_DISABLE, + evt->gpt_base + TIMER_CTRL_REG(timer)); + + writel(TIMER_CLK_SRC(TIMER_CLK_SRC_SYS13M) | TIMER_CLK_DIV1, + evt->gpt_base + TIMER_CLK_REG(timer)); + + writel(0x0, evt->gpt_base + TIMER_CMP_REG(timer)); + + writel(TIMER_CTRL_OP(option) | TIMER_CTRL_ENABLE, + evt->gpt_base + TIMER_CTRL_REG(timer)); +} + +static void mtk_timer_enable_irq(struct mtk_clock_event_device *evt, u8 timer) +{ + u32 val; + + val = readl(evt->gpt_base + GPT_IRQ_EN_REG); + writel(val | GPT_IRQ_ENABLE(timer), + evt->gpt_base + GPT_IRQ_EN_REG); +} + +static void __init mtk_timer_init(struct device_node *node) +{ + struct mtk_clock_event_device *evt; + struct resource res; + unsigned long rate = 0; + struct clk *clk; + + evt = kzalloc(sizeof(*evt), GFP_KERNEL); + if (!evt) { + pr_warn("Can't allocate mtk clock event driver struct"); + return; + } + + evt->dev.name = "mtk_tick"; + evt->dev.rating = 300; + evt->dev.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + evt->dev.set_mode = mtk_clkevt_mode; + evt->dev.set_next_event = mtk_clkevt_next_event; + evt->dev.cpumask = cpu_possible_mask; + + evt->gpt_base = of_io_request_and_map(node, 0, "mtk-timer"); + if (IS_ERR(evt->gpt_base)) { + pr_warn("Can't get resource\n"); + return; + } + + evt->dev.irq = irq_of_parse_and_map(node, 0); + if (evt->dev.irq <= 0) { + pr_warn("Can't parse IRQ"); + goto err_mem; + } + + clk = of_clk_get(node, 0); + if (IS_ERR(clk)) { + pr_warn("Can't get timer clock"); + goto err_irq; + } + + if (clk_prepare_enable(clk)) { + pr_warn("Can't prepare clock"); + goto err_clk_put; + } + rate = clk_get_rate(clk); + + if (request_irq(evt->dev.irq, mtk_timer_interrupt, + IRQF_TIMER | IRQF_IRQPOLL, "mtk_timer", evt)) { + pr_warn("failed to setup irq %d\n", evt->dev.irq); + goto err_clk_disable; + } + + evt->ticks_per_jiffy = DIV_ROUND_UP(rate, HZ); + + mtk_timer_global_reset(evt); + + /* Configure clock source */ + mtk_timer_setup(evt, GPT_CLK_SRC, TIMER_CTRL_OP_FREERUN); + clocksource_mmio_init(evt->gpt_base + TIMER_CNT_REG(GPT_CLK_SRC), + node->name, rate, 300, 32, clocksource_mmio_readl_up); + + /* Configure clock event */ + mtk_timer_setup(evt, GPT_CLK_EVT, TIMER_CTRL_OP_REPEAT); + mtk_timer_enable_irq(evt, GPT_CLK_EVT); + + clockevents_config_and_register(&evt->dev, rate, 0x3, + 0xffffffff); + return; + +err_clk_disable: + clk_disable_unprepare(clk); +err_clk_put: + clk_put(clk); +err_irq: + irq_dispose_mapping(evt->dev.irq); +err_mem: + iounmap(evt->gpt_base); + of_address_to_resource(node, 0, &res); + release_mem_region(res.start, resource_size(&res)); +} +CLOCKSOURCE_OF_DECLARE(mtk_mt6577, "mediatek,mt6577-timer", mtk_timer_init); diff --git a/drivers/clocksource/pxa_timer.c b/drivers/clocksource/pxa_timer.c new file mode 100644 index 000000000000..941f3f344e08 --- /dev/null +++ b/drivers/clocksource/pxa_timer.c @@ -0,0 +1,227 @@ +/* + * arch/arm/mach-pxa/time.c + * + * PXA clocksource, clockevents, and OST interrupt handlers. + * Copyright (c) 2007 by Bill Gatliff <bgat@billgatliff.com>. + * + * Derived from Nicolas Pitre's PXA timer handler Copyright (c) 2001 + * by MontaVista Software, Inc. (Nico, your code rocks!) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/sched_clock.h> + +#include <asm/div64.h> + +#define OSMR0 0x00 /* OS Timer 0 Match Register */ +#define OSMR1 0x04 /* OS Timer 1 Match Register */ +#define OSMR2 0x08 /* OS Timer 2 Match Register */ +#define OSMR3 0x0C /* OS Timer 3 Match Register */ + +#define OSCR 0x10 /* OS Timer Counter Register */ +#define OSSR 0x14 /* OS Timer Status Register */ +#define OWER 0x18 /* OS Timer Watchdog Enable Register */ +#define OIER 0x1C /* OS Timer Interrupt Enable Register */ + +#define OSSR_M3 (1 << 3) /* Match status channel 3 */ +#define OSSR_M2 (1 << 2) /* Match status channel 2 */ +#define OSSR_M1 (1 << 1) /* Match status channel 1 */ +#define OSSR_M0 (1 << 0) /* Match status channel 0 */ + +#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ + +/* + * This is PXA's sched_clock implementation. This has a resolution + * of at least 308 ns and a maximum value of 208 days. + * + * The return value is guaranteed to be monotonic in that range as + * long as there is always less than 582 seconds between successive + * calls to sched_clock() which should always be the case in practice. + */ + +#define timer_readl(reg) readl_relaxed(timer_base + (reg)) +#define timer_writel(val, reg) writel_relaxed((val), timer_base + (reg)) + +static void __iomem *timer_base; + +static u64 notrace pxa_read_sched_clock(void) +{ + return timer_readl(OSCR); +} + + +#define MIN_OSCR_DELTA 16 + +static irqreturn_t +pxa_ost0_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *c = dev_id; + + /* Disarm the compare/match, signal the event. */ + timer_writel(timer_readl(OIER) & ~OIER_E0, OIER); + timer_writel(OSSR_M0, OSSR); + c->event_handler(c); + + return IRQ_HANDLED; +} + +static int +pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev) +{ + unsigned long next, oscr; + + timer_writel(timer_readl(OIER) | OIER_E0, OIER); + next = timer_readl(OSCR) + delta; + timer_writel(next, OSMR0); + oscr = timer_readl(OSCR); + + return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0; +} + +static void +pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) +{ + switch (mode) { + case CLOCK_EVT_MODE_ONESHOT: + timer_writel(timer_readl(OIER) & ~OIER_E0, OIER); + timer_writel(OSSR_M0, OSSR); + break; + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + /* initializing, released, or preparing for suspend */ + timer_writel(timer_readl(OIER) & ~OIER_E0, OIER); + timer_writel(OSSR_M0, OSSR); + break; + + case CLOCK_EVT_MODE_RESUME: + case CLOCK_EVT_MODE_PERIODIC: + break; + } +} + +#ifdef CONFIG_PM +static unsigned long osmr[4], oier, oscr; + +static void pxa_timer_suspend(struct clock_event_device *cedev) +{ + osmr[0] = timer_readl(OSMR0); + osmr[1] = timer_readl(OSMR1); + osmr[2] = timer_readl(OSMR2); + osmr[3] = timer_readl(OSMR3); + oier = timer_readl(OIER); + oscr = timer_readl(OSCR); +} + +static void pxa_timer_resume(struct clock_event_device *cedev) +{ + /* + * Ensure that we have at least MIN_OSCR_DELTA between match + * register 0 and the OSCR, to guarantee that we will receive + * the one-shot timer interrupt. We adjust OSMR0 in preference + * to OSCR to guarantee that OSCR is monotonically incrementing. + */ + if (osmr[0] - oscr < MIN_OSCR_DELTA) + osmr[0] += MIN_OSCR_DELTA; + + timer_writel(osmr[0], OSMR0); + timer_writel(osmr[1], OSMR1); + timer_writel(osmr[2], OSMR2); + timer_writel(osmr[3], OSMR3); + timer_writel(oier, OIER); + timer_writel(oscr, OSCR); +} +#else +#define pxa_timer_suspend NULL +#define pxa_timer_resume NULL +#endif + +static struct clock_event_device ckevt_pxa_osmr0 = { + .name = "osmr0", + .features = CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .set_next_event = pxa_osmr0_set_next_event, + .set_mode = pxa_osmr0_set_mode, + .suspend = pxa_timer_suspend, + .resume = pxa_timer_resume, +}; + +static struct irqaction pxa_ost0_irq = { + .name = "ost0", + .flags = IRQF_TIMER | IRQF_IRQPOLL, + .handler = pxa_ost0_interrupt, + .dev_id = &ckevt_pxa_osmr0, +}; + +static void pxa_timer_common_init(int irq, unsigned long clock_tick_rate) +{ + timer_writel(0, OIER); + timer_writel(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR); + + sched_clock_register(pxa_read_sched_clock, 32, clock_tick_rate); + + ckevt_pxa_osmr0.cpumask = cpumask_of(0); + + setup_irq(irq, &pxa_ost0_irq); + + clocksource_mmio_init(timer_base + OSCR, "oscr0", clock_tick_rate, 200, + 32, clocksource_mmio_readl_up); + clockevents_config_and_register(&ckevt_pxa_osmr0, clock_tick_rate, + MIN_OSCR_DELTA * 2, 0x7fffffff); +} + +static void __init pxa_timer_dt_init(struct device_node *np) +{ + struct clk *clk; + int irq; + + /* timer registers are shared with watchdog timer */ + timer_base = of_iomap(np, 0); + if (!timer_base) + panic("%s: unable to map resource\n", np->name); + + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) { + pr_crit("%s: unable to get clk\n", np->name); + return; + } + clk_prepare_enable(clk); + + /* we are only interested in OS-timer0 irq */ + irq = irq_of_parse_and_map(np, 0); + if (irq <= 0) { + pr_crit("%s: unable to parse OS-timer0 irq\n", np->name); + return; + } + + pxa_timer_common_init(irq, clk_get_rate(clk)); +} +CLOCKSOURCE_OF_DECLARE(pxa_timer, "marvell,pxa-timer", pxa_timer_dt_init); + +/* + * Legacy timer init for non device-tree boards. + */ +void __init pxa_timer_nodt_init(int irq, void __iomem *base, + unsigned long clock_tick_rate) +{ + struct clk *clk; + + timer_base = base; + clk = clk_get(NULL, "OSTIMER0"); + if (clk && !IS_ERR(clk)) + clk_prepare_enable(clk); + else + pr_crit("%s: unable to get clk\n", __func__); + + pxa_timer_common_init(irq, clock_tick_rate); +} diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index dfa780396b91..2bd13b53b727 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -24,6 +24,7 @@ #include <linux/ioport.h> #include <linux/irq.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_domain.h> #include <linux/pm_runtime.h> @@ -114,14 +115,15 @@ struct sh_cmt_device { struct platform_device *pdev; const struct sh_cmt_info *info; - bool legacy; - void __iomem *mapbase_ch; void __iomem *mapbase; struct clk *clk; + raw_spinlock_t lock; /* Protect the shared start/stop register */ + struct sh_cmt_channel *channels; unsigned int num_channels; + unsigned int hw_channels; bool has_clockevent; bool has_clocksource; @@ -301,14 +303,12 @@ static unsigned long sh_cmt_get_counter(struct sh_cmt_channel *ch, return v2; } -static DEFINE_RAW_SPINLOCK(sh_cmt_lock); - static void sh_cmt_start_stop_ch(struct sh_cmt_channel *ch, int start) { unsigned long flags, value; /* start stop register shared by multiple timer channels */ - raw_spin_lock_irqsave(&sh_cmt_lock, flags); + raw_spin_lock_irqsave(&ch->cmt->lock, flags); value = sh_cmt_read_cmstr(ch); if (start) @@ -317,7 +317,7 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_channel *ch, int start) value &= ~(1 << ch->timer_bit); sh_cmt_write_cmstr(ch, value); - raw_spin_unlock_irqrestore(&sh_cmt_lock, flags); + raw_spin_unlock_irqrestore(&ch->cmt->lock, flags); } static int sh_cmt_enable(struct sh_cmt_channel *ch, unsigned long *rate) @@ -792,7 +792,7 @@ static int sh_cmt_register_clockevent(struct sh_cmt_channel *ch, int irq; int ret; - irq = platform_get_irq(ch->cmt->pdev, ch->cmt->legacy ? 0 : ch->index); + irq = platform_get_irq(ch->cmt->pdev, ch->index); if (irq < 0) { dev_err(&ch->cmt->pdev->dev, "ch%u: failed to get irq\n", ch->index); @@ -863,33 +863,26 @@ static int sh_cmt_setup_channel(struct sh_cmt_channel *ch, unsigned int index, * Compute the address of the channel control register block. For the * timers with a per-channel start/stop register, compute its address * as well. - * - * For legacy configuration the address has been mapped explicitly. */ - if (cmt->legacy) { - ch->ioctrl = cmt->mapbase_ch; - } else { - switch (cmt->info->model) { - case SH_CMT_16BIT: - ch->ioctrl = cmt->mapbase + 2 + ch->hwidx * 6; - break; - case SH_CMT_32BIT: - case SH_CMT_48BIT: - ch->ioctrl = cmt->mapbase + 0x10 + ch->hwidx * 0x10; - break; - case SH_CMT_32BIT_FAST: - /* - * The 32-bit "fast" timer has a single channel at hwidx - * 5 but is located at offset 0x40 instead of 0x60 for - * some reason. - */ - ch->ioctrl = cmt->mapbase + 0x40; - break; - case SH_CMT_48BIT_GEN2: - ch->iostart = cmt->mapbase + ch->hwidx * 0x100; - ch->ioctrl = ch->iostart + 0x10; - break; - } + switch (cmt->info->model) { + case SH_CMT_16BIT: + ch->ioctrl = cmt->mapbase + 2 + ch->hwidx * 6; + break; + case SH_CMT_32BIT: + case SH_CMT_48BIT: + ch->ioctrl = cmt->mapbase + 0x10 + ch->hwidx * 0x10; + break; + case SH_CMT_32BIT_FAST: + /* + * The 32-bit "fast" timer has a single channel at hwidx 5 but + * is located at offset 0x40 instead of 0x60 for some reason. + */ + ch->ioctrl = cmt->mapbase + 0x40; + break; + case SH_CMT_48BIT_GEN2: + ch->iostart = cmt->mapbase + ch->hwidx * 0x100; + ch->ioctrl = ch->iostart + 0x10; + break; } if (cmt->info->width == (sizeof(ch->max_match_value) * 8)) @@ -900,12 +893,7 @@ static int sh_cmt_setup_channel(struct sh_cmt_channel *ch, unsigned int index, ch->match_value = ch->max_match_value; raw_spin_lock_init(&ch->lock); - if (cmt->legacy) { - ch->timer_bit = ch->hwidx; - } else { - ch->timer_bit = cmt->info->model == SH_CMT_48BIT_GEN2 - ? 0 : ch->hwidx; - } + ch->timer_bit = cmt->info->model == SH_CMT_48BIT_GEN2 ? 0 : ch->hwidx; ret = sh_cmt_register(ch, dev_name(&cmt->pdev->dev), clockevent, clocksource); @@ -938,75 +926,65 @@ static int sh_cmt_map_memory(struct sh_cmt_device *cmt) return 0; } -static int sh_cmt_map_memory_legacy(struct sh_cmt_device *cmt) -{ - struct sh_timer_config *cfg = cmt->pdev->dev.platform_data; - struct resource *res, *res2; - - /* map memory, let mapbase_ch point to our channel */ - res = platform_get_resource(cmt->pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&cmt->pdev->dev, "failed to get I/O memory\n"); - return -ENXIO; - } - - cmt->mapbase_ch = ioremap_nocache(res->start, resource_size(res)); - if (cmt->mapbase_ch == NULL) { - dev_err(&cmt->pdev->dev, "failed to remap I/O memory\n"); - return -ENXIO; - } - - /* optional resource for the shared timer start/stop register */ - res2 = platform_get_resource(cmt->pdev, IORESOURCE_MEM, 1); - - /* map second resource for CMSTR */ - cmt->mapbase = ioremap_nocache(res2 ? res2->start : - res->start - cfg->channel_offset, - res2 ? resource_size(res2) : 2); - if (cmt->mapbase == NULL) { - dev_err(&cmt->pdev->dev, "failed to remap I/O second memory\n"); - iounmap(cmt->mapbase_ch); - return -ENXIO; - } - - /* identify the model based on the resources */ - if (resource_size(res) == 6) - cmt->info = &sh_cmt_info[SH_CMT_16BIT]; - else if (res2 && (resource_size(res2) == 4)) - cmt->info = &sh_cmt_info[SH_CMT_48BIT_GEN2]; - else - cmt->info = &sh_cmt_info[SH_CMT_32BIT]; +static const struct platform_device_id sh_cmt_id_table[] = { + { "sh-cmt-16", (kernel_ulong_t)&sh_cmt_info[SH_CMT_16BIT] }, + { "sh-cmt-32", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT] }, + { "sh-cmt-32-fast", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT_FAST] }, + { "sh-cmt-48", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT] }, + { "sh-cmt-48-gen2", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT_GEN2] }, + { } +}; +MODULE_DEVICE_TABLE(platform, sh_cmt_id_table); - return 0; -} +static const struct of_device_id sh_cmt_of_table[] __maybe_unused = { + { .compatible = "renesas,cmt-32", .data = &sh_cmt_info[SH_CMT_32BIT] }, + { .compatible = "renesas,cmt-32-fast", .data = &sh_cmt_info[SH_CMT_32BIT_FAST] }, + { .compatible = "renesas,cmt-48", .data = &sh_cmt_info[SH_CMT_48BIT] }, + { .compatible = "renesas,cmt-48-gen2", .data = &sh_cmt_info[SH_CMT_48BIT_GEN2] }, + { } +}; +MODULE_DEVICE_TABLE(of, sh_cmt_of_table); -static void sh_cmt_unmap_memory(struct sh_cmt_device *cmt) +static int sh_cmt_parse_dt(struct sh_cmt_device *cmt) { - iounmap(cmt->mapbase); - if (cmt->mapbase_ch) - iounmap(cmt->mapbase_ch); + struct device_node *np = cmt->pdev->dev.of_node; + + return of_property_read_u32(np, "renesas,channels-mask", + &cmt->hw_channels); } static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev) { - struct sh_timer_config *cfg = pdev->dev.platform_data; - const struct platform_device_id *id = pdev->id_entry; - unsigned int hw_channels; + unsigned int mask; + unsigned int i; int ret; memset(cmt, 0, sizeof(*cmt)); cmt->pdev = pdev; + raw_spin_lock_init(&cmt->lock); + + if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) { + const struct of_device_id *id; + + id = of_match_node(sh_cmt_of_table, pdev->dev.of_node); + cmt->info = id->data; - if (!cfg) { + ret = sh_cmt_parse_dt(cmt); + if (ret < 0) + return ret; + } else if (pdev->dev.platform_data) { + struct sh_timer_config *cfg = pdev->dev.platform_data; + const struct platform_device_id *id = pdev->id_entry; + + cmt->info = (const struct sh_cmt_info *)id->driver_data; + cmt->hw_channels = cfg->channels_mask; + } else { dev_err(&cmt->pdev->dev, "missing platform data\n"); return -ENXIO; } - cmt->info = (const struct sh_cmt_info *)id->driver_data; - cmt->legacy = cmt->info ? false : true; - /* Get hold of clock. */ - cmt->clk = clk_get(&cmt->pdev->dev, cmt->legacy ? "cmt_fck" : "fck"); + cmt->clk = clk_get(&cmt->pdev->dev, "fck"); if (IS_ERR(cmt->clk)) { dev_err(&cmt->pdev->dev, "cannot get clock\n"); return PTR_ERR(cmt->clk); @@ -1016,28 +994,13 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev) if (ret < 0) goto err_clk_put; - /* - * Map the memory resource(s). We need to support both the legacy - * platform device configuration (with one device per channel) and the - * new version (with multiple channels per device). - */ - if (cmt->legacy) - ret = sh_cmt_map_memory_legacy(cmt); - else - ret = sh_cmt_map_memory(cmt); - + /* Map the memory resource(s). */ + ret = sh_cmt_map_memory(cmt); if (ret < 0) goto err_clk_unprepare; /* Allocate and setup the channels. */ - if (cmt->legacy) { - cmt->num_channels = 1; - hw_channels = 0; - } else { - cmt->num_channels = hweight8(cfg->channels_mask); - hw_channels = cfg->channels_mask; - } - + cmt->num_channels = hweight8(cmt->hw_channels); cmt->channels = kzalloc(cmt->num_channels * sizeof(*cmt->channels), GFP_KERNEL); if (cmt->channels == NULL) { @@ -1045,35 +1008,21 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev) goto err_unmap; } - if (cmt->legacy) { - ret = sh_cmt_setup_channel(&cmt->channels[0], - cfg->timer_bit, cfg->timer_bit, - cfg->clockevent_rating != 0, - cfg->clocksource_rating != 0, cmt); + /* + * Use the first channel as a clock event device and the second channel + * as a clock source. If only one channel is available use it for both. + */ + for (i = 0, mask = cmt->hw_channels; i < cmt->num_channels; ++i) { + unsigned int hwidx = ffs(mask) - 1; + bool clocksource = i == 1 || cmt->num_channels == 1; + bool clockevent = i == 0; + + ret = sh_cmt_setup_channel(&cmt->channels[i], i, hwidx, + clockevent, clocksource, cmt); if (ret < 0) goto err_unmap; - } else { - unsigned int mask = hw_channels; - unsigned int i; - /* - * Use the first channel as a clock event device and the second - * channel as a clock source. If only one channel is available - * use it for both. - */ - for (i = 0; i < cmt->num_channels; ++i) { - unsigned int hwidx = ffs(mask) - 1; - bool clocksource = i == 1 || cmt->num_channels == 1; - bool clockevent = i == 0; - - ret = sh_cmt_setup_channel(&cmt->channels[i], i, hwidx, - clockevent, clocksource, - cmt); - if (ret < 0) - goto err_unmap; - - mask &= ~(1 << hwidx); - } + mask &= ~(1 << hwidx); } platform_set_drvdata(pdev, cmt); @@ -1082,7 +1031,7 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev) err_unmap: kfree(cmt->channels); - sh_cmt_unmap_memory(cmt); + iounmap(cmt->mapbase); err_clk_unprepare: clk_unprepare(cmt->clk); err_clk_put: @@ -1132,22 +1081,12 @@ static int sh_cmt_remove(struct platform_device *pdev) return -EBUSY; /* cannot unregister clockevent and clocksource */ } -static const struct platform_device_id sh_cmt_id_table[] = { - { "sh_cmt", 0 }, - { "sh-cmt-16", (kernel_ulong_t)&sh_cmt_info[SH_CMT_16BIT] }, - { "sh-cmt-32", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT] }, - { "sh-cmt-32-fast", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT_FAST] }, - { "sh-cmt-48", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT] }, - { "sh-cmt-48-gen2", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT_GEN2] }, - { } -}; -MODULE_DEVICE_TABLE(platform, sh_cmt_id_table); - static struct platform_driver sh_cmt_device_driver = { .probe = sh_cmt_probe, .remove = sh_cmt_remove, .driver = { .name = "sh_cmt", + .of_match_table = of_match_ptr(sh_cmt_of_table), }, .id_table = sh_cmt_id_table, }; diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c index 188d4e092efc..3d88698cf2b8 100644 --- a/drivers/clocksource/sh_mtu2.c +++ b/drivers/clocksource/sh_mtu2.c @@ -23,6 +23,7 @@ #include <linux/ioport.h> #include <linux/irq.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_domain.h> #include <linux/pm_runtime.h> @@ -37,7 +38,6 @@ struct sh_mtu2_channel { unsigned int index; void __iomem *base; - int irq; struct clock_event_device ced; }; @@ -48,15 +48,14 @@ struct sh_mtu2_device { void __iomem *mapbase; struct clk *clk; + raw_spinlock_t lock; /* Protect the shared registers */ + struct sh_mtu2_channel *channels; unsigned int num_channels; - bool legacy; bool has_clockevent; }; -static DEFINE_RAW_SPINLOCK(sh_mtu2_lock); - #define TSTR -1 /* shared register */ #define TCR 0 /* channel register */ #define TMDR 1 /* channel register */ @@ -162,12 +161,8 @@ static inline unsigned long sh_mtu2_read(struct sh_mtu2_channel *ch, int reg_nr) { unsigned long offs; - if (reg_nr == TSTR) { - if (ch->mtu->legacy) - return ioread8(ch->mtu->mapbase); - else - return ioread8(ch->mtu->mapbase + 0x280); - } + if (reg_nr == TSTR) + return ioread8(ch->mtu->mapbase + 0x280); offs = mtu2_reg_offs[reg_nr]; @@ -182,12 +177,8 @@ static inline void sh_mtu2_write(struct sh_mtu2_channel *ch, int reg_nr, { unsigned long offs; - if (reg_nr == TSTR) { - if (ch->mtu->legacy) - return iowrite8(value, ch->mtu->mapbase); - else - return iowrite8(value, ch->mtu->mapbase + 0x280); - } + if (reg_nr == TSTR) + return iowrite8(value, ch->mtu->mapbase + 0x280); offs = mtu2_reg_offs[reg_nr]; @@ -202,7 +193,7 @@ static void sh_mtu2_start_stop_ch(struct sh_mtu2_channel *ch, int start) unsigned long flags, value; /* start stop register shared by multiple timer channels */ - raw_spin_lock_irqsave(&sh_mtu2_lock, flags); + raw_spin_lock_irqsave(&ch->mtu->lock, flags); value = sh_mtu2_read(ch, TSTR); if (start) @@ -211,7 +202,7 @@ static void sh_mtu2_start_stop_ch(struct sh_mtu2_channel *ch, int start) value &= ~(1 << ch->index); sh_mtu2_write(ch, TSTR, value); - raw_spin_unlock_irqrestore(&sh_mtu2_lock, flags); + raw_spin_unlock_irqrestore(&ch->mtu->lock, flags); } static int sh_mtu2_enable(struct sh_mtu2_channel *ch) @@ -331,7 +322,6 @@ static void sh_mtu2_register_clockevent(struct sh_mtu2_channel *ch, const char *name) { struct clock_event_device *ced = &ch->ced; - int ret; ced->name = name; ced->features = CLOCK_EVT_FEAT_PERIODIC; @@ -344,24 +334,12 @@ static void sh_mtu2_register_clockevent(struct sh_mtu2_channel *ch, dev_info(&ch->mtu->pdev->dev, "ch%u: used for clock events\n", ch->index); clockevents_register_device(ced); - - ret = request_irq(ch->irq, sh_mtu2_interrupt, - IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING, - dev_name(&ch->mtu->pdev->dev), ch); - if (ret) { - dev_err(&ch->mtu->pdev->dev, "ch%u: failed to request irq %d\n", - ch->index, ch->irq); - return; - } } -static int sh_mtu2_register(struct sh_mtu2_channel *ch, const char *name, - bool clockevent) +static int sh_mtu2_register(struct sh_mtu2_channel *ch, const char *name) { - if (clockevent) { - ch->mtu->has_clockevent = true; - sh_mtu2_register_clockevent(ch, name); - } + ch->mtu->has_clockevent = true; + sh_mtu2_register_clockevent(ch, name); return 0; } @@ -372,40 +350,32 @@ static int sh_mtu2_setup_channel(struct sh_mtu2_channel *ch, unsigned int index, static const unsigned int channel_offsets[] = { 0x300, 0x380, 0x000, }; - bool clockevent; + char name[6]; + int irq; + int ret; ch->mtu = mtu; - if (mtu->legacy) { - struct sh_timer_config *cfg = mtu->pdev->dev.platform_data; - - clockevent = cfg->clockevent_rating != 0; - - ch->irq = platform_get_irq(mtu->pdev, 0); - ch->base = mtu->mapbase - cfg->channel_offset; - ch->index = cfg->timer_bit; - } else { - char name[6]; - - clockevent = true; - - sprintf(name, "tgi%ua", index); - ch->irq = platform_get_irq_byname(mtu->pdev, name); - ch->base = mtu->mapbase + channel_offsets[index]; - ch->index = index; - } - - if (ch->irq < 0) { + sprintf(name, "tgi%ua", index); + irq = platform_get_irq_byname(mtu->pdev, name); + if (irq < 0) { /* Skip channels with no declared interrupt. */ - if (!mtu->legacy) - return 0; + return 0; + } - dev_err(&mtu->pdev->dev, "ch%u: failed to get irq\n", - ch->index); - return ch->irq; + ret = request_irq(irq, sh_mtu2_interrupt, + IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING, + dev_name(&ch->mtu->pdev->dev), ch); + if (ret) { + dev_err(&ch->mtu->pdev->dev, "ch%u: failed to request irq %d\n", + index, irq); + return ret; } - return sh_mtu2_register(ch, dev_name(&mtu->pdev->dev), clockevent); + ch->base = mtu->mapbase + channel_offsets[index]; + ch->index = index; + + return sh_mtu2_register(ch, dev_name(&mtu->pdev->dev)); } static int sh_mtu2_map_memory(struct sh_mtu2_device *mtu) @@ -422,46 +392,21 @@ static int sh_mtu2_map_memory(struct sh_mtu2_device *mtu) if (mtu->mapbase == NULL) return -ENXIO; - /* - * In legacy platform device configuration (with one device per channel) - * the resource points to the channel base address. - */ - if (mtu->legacy) { - struct sh_timer_config *cfg = mtu->pdev->dev.platform_data; - mtu->mapbase += cfg->channel_offset; - } - return 0; } -static void sh_mtu2_unmap_memory(struct sh_mtu2_device *mtu) -{ - if (mtu->legacy) { - struct sh_timer_config *cfg = mtu->pdev->dev.platform_data; - mtu->mapbase -= cfg->channel_offset; - } - - iounmap(mtu->mapbase); -} - static int sh_mtu2_setup(struct sh_mtu2_device *mtu, struct platform_device *pdev) { - struct sh_timer_config *cfg = pdev->dev.platform_data; - const struct platform_device_id *id = pdev->id_entry; unsigned int i; int ret; mtu->pdev = pdev; - mtu->legacy = id->driver_data; - if (mtu->legacy && !cfg) { - dev_err(&mtu->pdev->dev, "missing platform data\n"); - return -ENXIO; - } + raw_spin_lock_init(&mtu->lock); /* Get hold of clock. */ - mtu->clk = clk_get(&mtu->pdev->dev, mtu->legacy ? "mtu2_fck" : "fck"); + mtu->clk = clk_get(&mtu->pdev->dev, "fck"); if (IS_ERR(mtu->clk)) { dev_err(&mtu->pdev->dev, "cannot get clock\n"); return PTR_ERR(mtu->clk); @@ -479,10 +424,7 @@ static int sh_mtu2_setup(struct sh_mtu2_device *mtu, } /* Allocate and setup the channels. */ - if (mtu->legacy) - mtu->num_channels = 1; - else - mtu->num_channels = 3; + mtu->num_channels = 3; mtu->channels = kzalloc(sizeof(*mtu->channels) * mtu->num_channels, GFP_KERNEL); @@ -491,16 +433,10 @@ static int sh_mtu2_setup(struct sh_mtu2_device *mtu, goto err_unmap; } - if (mtu->legacy) { - ret = sh_mtu2_setup_channel(&mtu->channels[0], 0, mtu); + for (i = 0; i < mtu->num_channels; ++i) { + ret = sh_mtu2_setup_channel(&mtu->channels[i], i, mtu); if (ret < 0) goto err_unmap; - } else { - for (i = 0; i < mtu->num_channels; ++i) { - ret = sh_mtu2_setup_channel(&mtu->channels[i], i, mtu); - if (ret < 0) - goto err_unmap; - } } platform_set_drvdata(pdev, mtu); @@ -509,7 +445,7 @@ static int sh_mtu2_setup(struct sh_mtu2_device *mtu, err_unmap: kfree(mtu->channels); - sh_mtu2_unmap_memory(mtu); + iounmap(mtu->mapbase); err_clk_unprepare: clk_unprepare(mtu->clk); err_clk_put: @@ -560,17 +496,23 @@ static int sh_mtu2_remove(struct platform_device *pdev) } static const struct platform_device_id sh_mtu2_id_table[] = { - { "sh_mtu2", 1 }, { "sh-mtu2", 0 }, { }, }; MODULE_DEVICE_TABLE(platform, sh_mtu2_id_table); +static const struct of_device_id sh_mtu2_of_table[] __maybe_unused = { + { .compatible = "renesas,mtu2" }, + { } +}; +MODULE_DEVICE_TABLE(of, sh_mtu2_of_table); + static struct platform_driver sh_mtu2_device_driver = { .probe = sh_mtu2_probe, .remove = sh_mtu2_remove, .driver = { .name = "sh_mtu2", + .of_match_table = of_match_ptr(sh_mtu2_of_table), }, .id_table = sh_mtu2_id_table, }; diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 6bd17a8f3dd4..0f665b8f2461 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -24,6 +24,7 @@ #include <linux/ioport.h> #include <linux/irq.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_domain.h> #include <linux/pm_runtime.h> @@ -32,7 +33,6 @@ #include <linux/spinlock.h> enum sh_tmu_model { - SH_TMU_LEGACY, SH_TMU, SH_TMU_SH3, }; @@ -62,6 +62,8 @@ struct sh_tmu_device { enum sh_tmu_model model; + raw_spinlock_t lock; /* Protect the shared start/stop register */ + struct sh_tmu_channel *channels; unsigned int num_channels; @@ -69,8 +71,6 @@ struct sh_tmu_device { bool has_clocksource; }; -static DEFINE_RAW_SPINLOCK(sh_tmu_lock); - #define TSTR -1 /* shared register */ #define TCOR 0 /* channel register */ #define TCNT 1 /* channel register */ @@ -91,8 +91,6 @@ static inline unsigned long sh_tmu_read(struct sh_tmu_channel *ch, int reg_nr) if (reg_nr == TSTR) { switch (ch->tmu->model) { - case SH_TMU_LEGACY: - return ioread8(ch->tmu->mapbase); case SH_TMU_SH3: return ioread8(ch->tmu->mapbase + 2); case SH_TMU: @@ -115,8 +113,6 @@ static inline void sh_tmu_write(struct sh_tmu_channel *ch, int reg_nr, if (reg_nr == TSTR) { switch (ch->tmu->model) { - case SH_TMU_LEGACY: - return iowrite8(value, ch->tmu->mapbase); case SH_TMU_SH3: return iowrite8(value, ch->tmu->mapbase + 2); case SH_TMU: @@ -137,7 +133,7 @@ static void sh_tmu_start_stop_ch(struct sh_tmu_channel *ch, int start) unsigned long flags, value; /* start stop register shared by multiple timer channels */ - raw_spin_lock_irqsave(&sh_tmu_lock, flags); + raw_spin_lock_irqsave(&ch->tmu->lock, flags); value = sh_tmu_read(ch, TSTR); if (start) @@ -146,7 +142,7 @@ static void sh_tmu_start_stop_ch(struct sh_tmu_channel *ch, int start) value &= ~(1 << ch->index); sh_tmu_write(ch, TSTR, value); - raw_spin_unlock_irqrestore(&sh_tmu_lock, flags); + raw_spin_unlock_irqrestore(&ch->tmu->lock, flags); } static int __sh_tmu_enable(struct sh_tmu_channel *ch) @@ -476,27 +472,12 @@ static int sh_tmu_channel_setup(struct sh_tmu_channel *ch, unsigned int index, return 0; ch->tmu = tmu; + ch->index = index; - if (tmu->model == SH_TMU_LEGACY) { - struct sh_timer_config *cfg = tmu->pdev->dev.platform_data; - - /* - * The SH3 variant (SH770x, SH7705, SH7710 and SH7720) maps - * channel registers blocks at base + 2 + 12 * index, while all - * other variants map them at base + 4 + 12 * index. We can - * compute the index by just dividing by 12, the 2 bytes or 4 - * bytes offset being hidden by the integer division. - */ - ch->index = cfg->channel_offset / 12; - ch->base = tmu->mapbase + cfg->channel_offset; - } else { - ch->index = index; - - if (tmu->model == SH_TMU_SH3) - ch->base = tmu->mapbase + 4 + ch->index * 12; - else - ch->base = tmu->mapbase + 8 + ch->index * 12; - } + if (tmu->model == SH_TMU_SH3) + ch->base = tmu->mapbase + 4 + ch->index * 12; + else + ch->base = tmu->mapbase + 8 + ch->index * 12; ch->irq = platform_get_irq(tmu->pdev, index); if (ch->irq < 0) { @@ -526,46 +507,53 @@ static int sh_tmu_map_memory(struct sh_tmu_device *tmu) if (tmu->mapbase == NULL) return -ENXIO; - /* - * In legacy platform device configuration (with one device per channel) - * the resource points to the channel base address. - */ - if (tmu->model == SH_TMU_LEGACY) { - struct sh_timer_config *cfg = tmu->pdev->dev.platform_data; - tmu->mapbase -= cfg->channel_offset; - } - return 0; } -static void sh_tmu_unmap_memory(struct sh_tmu_device *tmu) +static int sh_tmu_parse_dt(struct sh_tmu_device *tmu) { - if (tmu->model == SH_TMU_LEGACY) { - struct sh_timer_config *cfg = tmu->pdev->dev.platform_data; - tmu->mapbase += cfg->channel_offset; + struct device_node *np = tmu->pdev->dev.of_node; + + tmu->model = SH_TMU; + tmu->num_channels = 3; + + of_property_read_u32(np, "#renesas,channels", &tmu->num_channels); + + if (tmu->num_channels != 2 && tmu->num_channels != 3) { + dev_err(&tmu->pdev->dev, "invalid number of channels %u\n", + tmu->num_channels); + return -EINVAL; } - iounmap(tmu->mapbase); + return 0; } static int sh_tmu_setup(struct sh_tmu_device *tmu, struct platform_device *pdev) { - struct sh_timer_config *cfg = pdev->dev.platform_data; - const struct platform_device_id *id = pdev->id_entry; unsigned int i; int ret; - if (!cfg) { + tmu->pdev = pdev; + + raw_spin_lock_init(&tmu->lock); + + if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) { + ret = sh_tmu_parse_dt(tmu); + if (ret < 0) + return ret; + } else if (pdev->dev.platform_data) { + const struct platform_device_id *id = pdev->id_entry; + struct sh_timer_config *cfg = pdev->dev.platform_data; + + tmu->model = id->driver_data; + tmu->num_channels = hweight8(cfg->channels_mask); + } else { dev_err(&tmu->pdev->dev, "missing platform data\n"); return -ENXIO; } - tmu->pdev = pdev; - tmu->model = id->driver_data; - /* Get hold of clock. */ - tmu->clk = clk_get(&tmu->pdev->dev, - tmu->model == SH_TMU_LEGACY ? "tmu_fck" : "fck"); + tmu->clk = clk_get(&tmu->pdev->dev, "fck"); if (IS_ERR(tmu->clk)) { dev_err(&tmu->pdev->dev, "cannot get clock\n"); return PTR_ERR(tmu->clk); @@ -583,11 +571,6 @@ static int sh_tmu_setup(struct sh_tmu_device *tmu, struct platform_device *pdev) } /* Allocate and setup the channels. */ - if (tmu->model == SH_TMU_LEGACY) - tmu->num_channels = 1; - else - tmu->num_channels = hweight8(cfg->channels_mask); - tmu->channels = kzalloc(sizeof(*tmu->channels) * tmu->num_channels, GFP_KERNEL); if (tmu->channels == NULL) { @@ -595,23 +578,15 @@ static int sh_tmu_setup(struct sh_tmu_device *tmu, struct platform_device *pdev) goto err_unmap; } - if (tmu->model == SH_TMU_LEGACY) { - ret = sh_tmu_channel_setup(&tmu->channels[0], 0, - cfg->clockevent_rating != 0, - cfg->clocksource_rating != 0, tmu); + /* + * Use the first channel as a clock event device and the second channel + * as a clock source. + */ + for (i = 0; i < tmu->num_channels; ++i) { + ret = sh_tmu_channel_setup(&tmu->channels[i], i, + i == 0, i == 1, tmu); if (ret < 0) goto err_unmap; - } else { - /* - * Use the first channel as a clock event device and the second - * channel as a clock source. - */ - for (i = 0; i < tmu->num_channels; ++i) { - ret = sh_tmu_channel_setup(&tmu->channels[i], i, - i == 0, i == 1, tmu); - if (ret < 0) - goto err_unmap; - } } platform_set_drvdata(pdev, tmu); @@ -620,7 +595,7 @@ static int sh_tmu_setup(struct sh_tmu_device *tmu, struct platform_device *pdev) err_unmap: kfree(tmu->channels); - sh_tmu_unmap_memory(tmu); + iounmap(tmu->mapbase); err_clk_unprepare: clk_unprepare(tmu->clk); err_clk_put: @@ -671,18 +646,24 @@ static int sh_tmu_remove(struct platform_device *pdev) } static const struct platform_device_id sh_tmu_id_table[] = { - { "sh_tmu", SH_TMU_LEGACY }, { "sh-tmu", SH_TMU }, { "sh-tmu-sh3", SH_TMU_SH3 }, { } }; MODULE_DEVICE_TABLE(platform, sh_tmu_id_table); +static const struct of_device_id sh_tmu_of_table[] __maybe_unused = { + { .compatible = "renesas,tmu" }, + { } +}; +MODULE_DEVICE_TABLE(of, sh_tmu_of_table); + static struct platform_driver sh_tmu_device_driver = { .probe = sh_tmu_probe, .remove = sh_tmu_remove, .driver = { .name = "sh_tmu", + .of_match_table = of_match_ptr(sh_tmu_of_table), }, .id_table = sh_tmu_id_table, }; diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c index dbd30398222a..330e93064692 100644 --- a/drivers/clocksource/timer-marco.c +++ b/drivers/clocksource/timer-marco.c @@ -260,6 +260,9 @@ static void __init sirfsoc_marco_timer_init(struct device_node *np) clk = of_clk_get(np, 0); BUG_ON(IS_ERR(clk)); + + BUG_ON(clk_prepare_enable(clk)); + rate = clk_get_rate(clk); BUG_ON(rate < MARCO_CLOCK_FREQ); diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c index a722aac7ac02..ce18d570e1cd 100644 --- a/drivers/clocksource/timer-prima2.c +++ b/drivers/clocksource/timer-prima2.c @@ -200,6 +200,9 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np) clk = of_clk_get(np, 0); BUG_ON(IS_ERR(clk)); + + BUG_ON(clk_prepare_enable(clk)); + rate = clk_get_rate(clk); BUG_ON(rate < PRIMA2_CLOCK_FREQ); diff --git a/drivers/of/address.c b/drivers/of/address.c index 5edfcb0da37d..e3718250d66e 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -702,6 +702,42 @@ void __iomem *of_iomap(struct device_node *np, int index) } EXPORT_SYMBOL(of_iomap); +/* + * of_io_request_and_map - Requests a resource and maps the memory mapped IO + * for a given device_node + * @device: the device whose io range will be mapped + * @index: index of the io range + * @name: name of the resource + * + * Returns a pointer to the requested and mapped memory or an ERR_PTR() encoded + * error code on failure. Usage example: + * + * base = of_io_request_and_map(node, 0, "foo"); + * if (IS_ERR(base)) + * return PTR_ERR(base); + */ +void __iomem *of_io_request_and_map(struct device_node *np, int index, + char *name) +{ + struct resource res; + void __iomem *mem; + + if (of_address_to_resource(np, index, &res)) + return IOMEM_ERR_PTR(-EINVAL); + + if (!request_mem_region(res.start, resource_size(&res), name)) + return IOMEM_ERR_PTR(-EBUSY); + + mem = ioremap(res.start, resource_size(&res)); + if (!mem) { + release_mem_region(res.start, resource_size(&res)); + return IOMEM_ERR_PTR(-ENOMEM); + } + + return mem; +} +EXPORT_SYMBOL(of_io_request_and_map); + /** * of_dma_get_range - Get DMA range info * @np: device node to get DMA range info diff --git a/include/clocksource/pxa.h b/include/clocksource/pxa.h new file mode 100644 index 000000000000..1efbe5a66958 --- /dev/null +++ b/include/clocksource/pxa.h @@ -0,0 +1,18 @@ +/* + * PXA clocksource, clockevents, and OST interrupt handlers. + * + * Copyright (C) 2014 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + */ + +#ifndef _CLOCKSOURCE_PXA_H +#define _CLOCKSOURCE_PXA_H + +extern void pxa_timer_nodt_init(int irq, void __iomem *base, + unsigned long clock_tick_rate); + +#endif diff --git a/include/linux/io.h b/include/linux/io.h index b76e6e545806..d5fc9b8d8b03 100644 --- a/include/linux/io.h +++ b/include/linux/io.h @@ -58,6 +58,8 @@ static inline void devm_ioport_unmap(struct device *dev, void __iomem *addr) } #endif +#define IOMEM_ERR_PTR(err) (__force void __iomem *)ERR_PTR(err) + void __iomem *devm_ioremap(struct device *dev, resource_size_t offset, unsigned long size); void __iomem *devm_ioremap_nocache(struct device *dev, resource_size_t offset, diff --git a/include/linux/of_address.h b/include/linux/of_address.h index c13b8782a4eb..fb7b7221e063 100644 --- a/include/linux/of_address.h +++ b/include/linux/of_address.h @@ -109,7 +109,12 @@ static inline bool of_dma_is_coherent(struct device_node *np) extern int of_address_to_resource(struct device_node *dev, int index, struct resource *r); void __iomem *of_iomap(struct device_node *node, int index); +void __iomem *of_io_request_and_map(struct device_node *device, + int index, char *name); #else + +#include <linux/io.h> + static inline int of_address_to_resource(struct device_node *dev, int index, struct resource *r) { @@ -120,6 +125,12 @@ static inline void __iomem *of_iomap(struct device_node *device, int index) { return NULL; } + +static inline void __iomem *of_io_request_and_map(struct device_node *device, + int index, char *name) +{ + return IOMEM_ERR_PTR(-EINVAL); +} #endif #if defined(CONFIG_OF_ADDRESS) && defined(CONFIG_PCI) diff --git a/include/linux/sh_timer.h b/include/linux/sh_timer.h index 8e1e036d6d45..64638b058076 100644 --- a/include/linux/sh_timer.h +++ b/include/linux/sh_timer.h @@ -2,11 +2,6 @@ #define __SH_TIMER_H__ struct sh_timer_config { - char *name; - long channel_offset; - int timer_bit; - unsigned long clockevent_rating; - unsigned long clocksource_rating; unsigned int channels_mask; }; diff --git a/lib/devres.c b/lib/devres.c index f562bf6ff71d..bb632484a860 100644 --- a/lib/devres.c +++ b/lib/devres.c @@ -86,8 +86,6 @@ void devm_iounmap(struct device *dev, void __iomem *addr) } EXPORT_SYMBOL(devm_iounmap); -#define IOMEM_ERR_PTR(err) (__force void __iomem *)ERR_PTR(err) - /** * devm_ioremap_resource() - check, request region, and ioremap resource * @dev: generic device to handle the resource for |