diff options
| -rw-r--r-- | arch/mips/Kconfig | 11 | ||||
| -rw-r--r-- | arch/mips/Makefile | 7 | ||||
| -rw-r--r-- | arch/mips/kernel/head.S | 2 | ||||
| -rw-r--r-- | arch/mips/mips-boards/sim/Makefile | 20 | ||||
| -rw-r--r-- | arch/mips/mips-boards/sim/cmdline.c | 59 | ||||
| -rw-r--r-- | arch/mips/mips-boards/sim/sim_IRQ.c | 148 | ||||
| -rw-r--r-- | arch/mips/mips-boards/sim/sim_cmdline.c | 33 | ||||
| -rw-r--r-- | arch/mips/mips-boards/sim/sim_int.c | 41 | ||||
| -rw-r--r-- | arch/mips/mips-boards/sim/sim_irq.S | 99 | ||||
| -rw-r--r-- | arch/mips/mips-boards/sim/sim_mem.c | 129 | ||||
| -rw-r--r-- | arch/mips/mips-boards/sim/sim_printf.c | 74 | ||||
| -rw-r--r-- | arch/mips/mips-boards/sim/sim_setup.c | 101 | ||||
| -rw-r--r-- | arch/mips/mips-boards/sim/sim_smp.c | 151 | ||||
| -rw-r--r-- | arch/mips/mips-boards/sim/sim_time.c | 215 | ||||
| -rw-r--r-- | include/asm-mips/mach-sim/cpu-feature-overrides.h | 66 | ||||
| -rw-r--r-- | include/asm-mips/mips-boards/sim.h | 40 | ||||
| -rw-r--r-- | include/asm-mips/mips-boards/simint.h | 34 |
17 files changed, 1229 insertions, 1 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index bca73426b6f1..b11ed7ff0afd 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -448,6 +448,17 @@ config MOMENCO_OCELOT_3 The Ocelot-3 is based off Discovery III System Controller and PMC-Sierra Rm79000 core. +config MIPS_SIM + bool 'Support for MIPS simulator (MIPSsim)' + select DMA_NONCOHERENT + select IRQ_CPU + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_LITTLE_ENDIAN + help + This option enables support for MIPS Technologies MIPSsim software + emulator. + config MOMENCO_JAGUAR_ATX bool "Support for Momentum Jaguar board" select BOOT_ELF32 diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 3dc2fb81fb28..4d0645cb5725 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -437,6 +437,13 @@ core-$(CONFIG_MIPS_SEAD) += arch/mips/mips-boards/sead/ load-$(CONFIG_MIPS_SEAD) += 0xffffffff80100000 # +# MIPS SIM +# +core-$(CONFIG_MIPS_SIM) += arch/mips/mips-boards/sim/ +cflags-$(CONFIG_MIPS_SIM) += -Iinclude/asm-mips/mach-sim +load-$(CONFIG_MIPS_SIM) += 0x80100000 + +# # Momentum Ocelot board # # The Ocelot setup.o must be linked early - it does the ioremap() for the diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index d2de5d025dbf..2e9122a4213a 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -116,7 +116,7 @@ EXPORT(stext) # used for profiling EXPORT(_stext) -#ifdef CONFIG_QEMU +#if defined(CONFIG_QEMU) || defined(CONFIG_MIPS_SIM) /* * Give us a fighting chance of running if execution beings at the * kernel load address. This is needed because this platform does diff --git a/arch/mips/mips-boards/sim/Makefile b/arch/mips/mips-boards/sim/Makefile new file mode 100644 index 000000000000..5b977de4ecff --- /dev/null +++ b/arch/mips/mips-boards/sim/Makefile @@ -0,0 +1,20 @@ +# +# Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. +# +# This program is free software; you can distribute it and/or modify it +# under the terms of the GNU General Public License (Version 2) as +# published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License along +# with this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +# + +obj-y := sim_setup.o sim_mem.o sim_time.o sim_printf.o sim_int.o sim_irq.o \ + sim_cmdline.o +obj-$(CONFIG_SMP) += sim_smp.o diff --git a/arch/mips/mips-boards/sim/cmdline.c b/arch/mips/mips-boards/sim/cmdline.c new file mode 100644 index 000000000000..fef9fbd8e710 --- /dev/null +++ b/arch/mips/mips-boards/sim/cmdline.c @@ -0,0 +1,59 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Kernel command line creation using the prom monitor (YAMON) argc/argv. + */ +#include <linux/init.h> +#include <linux/string.h> + +#include <asm/bootinfo.h> + +extern int prom_argc; +extern int *_prom_argv; + +/* + * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. + * This macro take care of sign extension. + */ +#define prom_argv(index) ((char *)(((int *)(int)_prom_argv)[(index)])) + +char arcs_cmdline[CL_SIZE]; + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + + +void __init prom_init_cmdline(void) +{ + char *cp; + int actr; + + actr = 1; /* Always ignore argv[0] */ + + cp = &(arcs_cmdline[0]); + while(actr < prom_argc) { + strcpy(cp, prom_argv(actr)); + cp += strlen(prom_argv(actr)); + *cp++ = ' '; + actr++; + } + if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ + --cp; + *cp = '\0'; +} diff --git a/arch/mips/mips-boards/sim/sim_IRQ.c b/arch/mips/mips-boards/sim/sim_IRQ.c new file mode 100644 index 000000000000..9987a85aabeb --- /dev/null +++ b/arch/mips/mips-boards/sim/sim_IRQ.c @@ -0,0 +1,148 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Interrupt exception dispatch code. + */ +#include <linux/config.h> + +#include <asm/asm.h> +#include <asm/mipsregs.h> +#include <asm/regdef.h> +#include <asm/stackframe.h> + +/* A lot of complication here is taken away because: + * + * 1) We handle one interrupt and return, sitting in a loop and moving across + * all the pending IRQ bits in the cause register is _NOT_ the answer, the + * common case is one pending IRQ so optimize in that direction. + * + * 2) We need not check against bits in the status register IRQ mask, that + * would make this routine slow as hell. + * + * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in + * between like BSD spl() brain-damage. + * + * Furthermore, the IRQs on the MIPS board look basically (barring software + * IRQs which we don't use at all and all external interrupt sources are + * combined together on hardware interrupt 0 (MIPS IRQ 2)) like: + * + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Combined hardware interrupt (hw0) + * 3 Hardware (ignored) + * 4 Hardware (ignored) + * 5 Hardware (ignored) + * 6 Hardware (ignored) + * 7 R4k timer (what we use) + * + * Note: On the SEAD board thing are a little bit different. + * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired + * wired to UART1. + * + * We handle the IRQ according to _our_ priority which is: + * + * Highest ---- R4k Timer + * Lowest ---- Combined hardware interrupt + * + * then we just return, if multiple IRQs are pending then we will just take + * another exception, big deal. + */ + + .text + .set noreorder + .set noat + .align 5 + NESTED(mipsIRQ, PT_SIZE, sp) + SAVE_ALL + CLI + .set at + + mfc0 s0, CP0_CAUSE # get irq bits + mfc0 s1, CP0_STATUS # get irq mask + and s0, s1 + + /* First we check for r4k counter/timer IRQ. */ + andi a0, s0, CAUSEF_IP7 + beq a0, zero, 1f + andi a0, s0, CAUSEF_IP2 # delay slot, check hw0 interrupt + + /* Wheee, a timer interrupt. */ + move a0, sp + jal mips_timer_interrupt + nop + + j ret_from_irq + nop + +1: +#if defined(CONFIG_MIPS_SEAD) + beq a0, zero, 1f + andi a0, s0, CAUSEF_IP3 # delay slot, check hw1 interrupt +#else + beq a0, zero, 1f # delay slot, check hw3 interrupt + andi a0, s0, CAUSEF_IP5 +#endif + + /* Wheee, combined hardware level zero interrupt. */ +#if defined(CONFIG_MIPS_ATLAS) + jal atlas_hw0_irqdispatch +#elif defined(CONFIG_MIPS_MALTA) + jal malta_hw0_irqdispatch +#elif defined(CONFIG_MIPS_SEAD) + jal sead_hw0_irqdispatch +#else +#error "MIPS board not supported\n" +#endif + move a0, sp # delay slot + + j ret_from_irq + nop # delay slot + +1: +#if defined(CONFIG_MIPS_SEAD) + beq a0, zero, 1f + andi a0, s0, CAUSEF_IP5 # delay slot, check hw3 interrupt + jal sead_hw1_irqdispatch + move a0, sp # delay slot + j ret_from_irq + nop # delay slot +1: +#endif +#if defined(CONFIG_MIPS_MALTA) + beq a0, zero, 1f # check hw3 (coreHI) interrupt + nop + jal corehi_irqdispatch + move a0, sp + j ret_from_irq + nop +1: +#endif + /* + * Here by mistake? This is possible, what can happen is that by the + * time we take the exception the IRQ pin goes low, so just leave if + * this is the case. + */ + move a1,s0 + PRINT("Got interrupt: c0_cause = %08x\n") + mfc0 a1, CP0_EPC + PRINT("c0_epc = %08x\n") + + j ret_from_irq + nop + END(mipsIRQ) diff --git a/arch/mips/mips-boards/sim/sim_cmdline.c b/arch/mips/mips-boards/sim/sim_cmdline.c new file mode 100644 index 000000000000..9df37c6fca36 --- /dev/null +++ b/arch/mips/mips-boards/sim/sim_cmdline.c @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ +#include <linux/init.h> +#include <linux/string.h> +#include <asm/bootinfo.h> + +extern char arcs_cmdline[]; + +char * __init prom_getcmdline(void) +{ + return arcs_cmdline; +} + + +void __init prom_init_cmdline(void) +{ + /* nothing to do */ +} diff --git a/arch/mips/mips-boards/sim/sim_int.c b/arch/mips/mips-boards/sim/sim_int.c new file mode 100644 index 000000000000..a4d0a2c05031 --- /dev/null +++ b/arch/mips/mips-boards/sim/sim_int.c @@ -0,0 +1,41 @@ +/* + * Copyright (C) 1999, 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/kernel_stat.h> +#include <asm/mips-boards/simint.h> + + +extern void mips_cpu_irq_init(int); + +extern asmlinkage void simIRQ(void); + +asmlinkage void sim_hw0_irqdispatch(struct pt_regs *regs) +{ + do_IRQ(2, regs); +} + +void __init arch_init_irq(void) +{ + /* Now safe to set the exception vector. */ + set_except_vector(0, simIRQ); + + mips_cpu_irq_init(MIPSCPU_INT_BASE); +} diff --git a/arch/mips/mips-boards/sim/sim_irq.S b/arch/mips/mips-boards/sim/sim_irq.S new file mode 100644 index 000000000000..835f0387fcd4 --- /dev/null +++ b/arch/mips/mips-boards/sim/sim_irq.S @@ -0,0 +1,99 @@ +/* + * Copyright (C) 1999, 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Interrupt exception dispatch code. + * + */ +#include <linux/config.h> + +#include <asm/asm.h> +#include <asm/mipsregs.h> +#include <asm/regdef.h> +#include <asm/stackframe.h> + +#include <asm/mips-boards/simint.h> + + + .text + .set noreorder + .set noat + .align 5 + NESTED(simIRQ, PT_SIZE, sp) + SAVE_ALL + CLI + .set at + + mfc0 s0, CP0_CAUSE # get irq bits + mfc0 s1, CP0_STATUS # get irq mask + andi s0, ST0_IM # CAUSE.CE may be non-zero! + and s0, s1 + +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + .set mips32 + clz a0, s0 + .set mips0 + negu a0 + addu a0, 31-CAUSEB_IP + bltz a0, spurious +#else + beqz s0, spurious + li a0, 7 + + and t0, s0, 0xf000 + sltiu t0, t0, 1 + sll t0, 2 + subu a0, t0 + sll s0, t0 + + and t0, s0, 0xc000 + sltiu t0, t0, 1 + sll t0, 1 + subu a0, t0 + sll s0, t0 + + and t0, s0, 0x8000 + sltiu t0, t0, 1 + # sll t0, 0 + subu a0, t0 + # sll s0, t0 +#endif + +#ifdef CASCADE_IRQ + li a1, CASCADE_IRQ + bne a0, a1, 1f + addu a0, MIPSCPU_INT_BASE + + jal CASCADE_DISPATCH + move a0, sp + + j ret_from_irq + nop +1: +#else + addu a0, MIPSCPU_INT_BASE +#endif + + jal do_IRQ + move a1, sp + + j ret_from_irq + nop + + +spurious: + j spurious_interrupt + nop + END(simIRQ) diff --git a/arch/mips/mips-boards/sim/sim_mem.c b/arch/mips/mips-boards/sim/sim_mem.c new file mode 100644 index 000000000000..0dbd7435bb2a --- /dev/null +++ b/arch/mips/mips-boards/sim/sim_mem.c @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/bootmem.h> + +#include <asm/bootinfo.h> +#include <asm/page.h> + +#include <asm/mips-boards/prom.h> + +/*#define DEBUG*/ + +enum simmem_memtypes { + simmem_reserved = 0, + simmem_free, +}; +struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS]; + +#ifdef DEBUG +static char *mtypes[3] = { + "SIM reserved memory", + "SIM free memory", +}; +#endif + +/* References to section boundaries */ +extern char _end; + +#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK) + + +struct prom_pmemblock * __init prom_getmdesc(void) +{ + unsigned int memsize; + + memsize = 0x02000000; + prom_printf("Setting default memory size 0x%08x\n", memsize); + + memset(mdesc, 0, sizeof(mdesc)); + + mdesc[0].type = simmem_reserved; + mdesc[0].base = 0x00000000; + mdesc[0].size = 0x00001000; + + mdesc[1].type = simmem_free; + mdesc[1].base = 0x00001000; + mdesc[1].size = 0x000ff000; + + mdesc[2].type = simmem_reserved; + mdesc[2].base = 0x00100000; + mdesc[2].size = CPHYSADDR(PFN_ALIGN(&_end)) - mdesc[2].base; + + mdesc[3].type = simmem_free; + mdesc[3].base = CPHYSADDR(PFN_ALIGN(&_end)); + mdesc[3].size = memsize - mdesc[3].base; + + return &mdesc[0]; +} + +static int __init prom_memtype_classify (unsigned int type) +{ + switch (type) { + case simmem_free: + return BOOT_MEM_RAM; + case simmem_reserved: + default: + return BOOT_MEM_RESERVED; + } +} + +void __init prom_meminit(void) +{ + struct prom_pmemblock *p; + + p = prom_getmdesc(); + + while (p->size) { + long type; + unsigned long base, size; + + type = prom_memtype_classify (p->type); + base = p->base; + size = p->size; + + add_memory_region(base, size, type); + p++; + } +} + +unsigned long __init prom_free_prom_memory(void) +{ + int i; + unsigned long freed = 0; + unsigned long addr; + + for (i = 0; i < boot_mem_map.nr_map; i++) { + if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) + continue; + + addr = boot_mem_map.map[i].addr; + while (addr < boot_mem_map.map[i].addr + + boot_mem_map.map[i].size) { + ClearPageReserved(virt_to_page(__va(addr))); + set_page_count(virt_to_page(__va(addr)), 1); + free_page((unsigned long)__va(addr)); + addr += PAGE_SIZE; + freed += PAGE_SIZE; + } + } + printk("Freeing prom memory: %ldkb freed\n", freed >> 10); + + return freed; +} diff --git a/arch/mips/mips-boards/sim/sim_printf.c b/arch/mips/mips-boards/sim/sim_printf.c new file mode 100644 index 000000000000..3ee5a0b501a6 --- /dev/null +++ b/arch/mips/mips-boards/sim/sim_printf.c @@ -0,0 +1,74 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Putting things on the screen/serial line using YAMONs facilities. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/serial_reg.h> +#include <linux/spinlock.h> +#include <asm/io.h> +#include <asm/system.h> + +static inline unsigned int serial_in(int offset) +{ + return inb(0x3f8 + offset); +} + +static inline void serial_out(int offset, int value) +{ + outb(value, 0x3f8 + offset); +} + +int putPromChar(char c) +{ + while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0) + ; + + serial_out(UART_TX, c); + + return 1; +} + +char getPromChar(void) +{ + while (!(serial_in(UART_LSR) & 1)) + ; + + return serial_in(UART_RX); +} + +void prom_printf(char *fmt, ...) +{ + va_list args; + int l; + char *p, *buf_end; + char buf[1024]; + + va_start(args, fmt); + l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */ + va_end(args); + + buf_end = buf + l; + + for (p = buf; p < buf_end; p++) { + /* Crude cr/nl handling is better than none */ + if (*p == '\n') + putPromChar('\r'); + putPromChar(*p); + } +} diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mips-boards/sim/sim_setup.c new file mode 100644 index 000000000000..485d5a58d9cf --- /dev/null +++ b/arch/mips/mips-boards/sim/sim_setup.c @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/tty.h> +#include <linux/serial.h> +#include <linux/serial_core.h> + +#include <asm/cpu.h> +#include <asm/bootinfo.h> +#include <asm/irq.h> +#include <asm/mips-boards/generic.h> +#include <asm/mips-boards/prom.h> +#include <asm/serial.h> +#include <asm/io.h> +#include <asm/time.h> +#include <asm/mips-boards/sim.h> +#include <asm/mips-boards/simint.h> + + +extern void sim_time_init(void); +extern void sim_timer_setup(struct irqaction *irq); +static void __init serial_init(void); +unsigned int _isbonito = 0; + +extern void __init sanitize_tlb_entries(void); + + +const char *get_system_type(void) +{ + return "MIPSsim"; +} + +void __init plat_setup(void) +{ + set_io_port_base(0xbfd00000); + + serial_init(); + + board_time_init = sim_time_init; + board_timer_setup = sim_timer_setup; + prom_printf("Linux started...\n"); + +#ifdef CONFIG_MT_SMP + sanitize_tlb_entries(); +#endif +} + +void prom_init(void) +{ + set_io_port_base(0xbfd00000); + + prom_printf("\nLINUX started...\n"); + prom_init_cmdline(); + prom_meminit(); +} + + +static void __init serial_init(void) +{ +#ifdef CONFIG_SERIAL_8250 + struct uart_port s; + + memset(&s, 0, sizeof(s)); + + s.iobase = 0x3f8; + + /* hardware int 4 - the serial int, is CPU int 6 + but poll for now */ + s.irq = 0; + s.uartclk = BASE_BAUD * 16; + s.flags = ASYNC_BOOT_AUTOCONF | UPF_SKIP_TEST; + s.iotype = SERIAL_IO_PORT | ASYNC_SKIP_TEST; + s.regshift = 0; + s.timeout = 4; + + if (early_serial_setup(&s) != 0) { + prom_printf(KERN_ERR "Serial setup failed!\n"); + } + +#endif +} diff --git a/arch/mips/mips-boards/sim/sim_smp.c b/arch/mips/mips-boards/sim/sim_smp.c new file mode 100644 index 000000000000..19824359f5de --- /dev/null +++ b/arch/mips/mips-boards/sim/sim_smp.c @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ +/* + * Simulator Platform-specific hooks for SMP operation + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/cpumask.h> +#include <linux/interrupt.h> +#include <asm/atomic.h> +#include <asm/cpu.h> +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/hardirq.h> +#include <asm/mmu_context.h> +#include <asm/smp.h> +#ifdef CONFIG_MIPS_MT_SMTC +#include <asm/smtc_ipi.h> +#endif /* CONFIG_MIPS_MT_SMTC */ + +/* VPE/SMP Prototype implements platform interfaces directly */ +#if !defined(CONFIG_MIPS_MT_SMP) + +/* + * Cause the specified action to be performed on a targeted "CPU" + */ + +void core_send_ipi(int cpu, unsigned int action) +{ +#ifdef CONFIG_MIPS_MT_SMTC + void smtc_send_ipi(int, int, unsigned int); + + smtc_send_ipi(cpu, LINUX_SMP_IPI, action); +#endif /* CONFIG_MIPS_MT_SMTC */ +/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */ + +} + +/* + * Detect available CPUs/VPEs/TCs and populate phys_cpu_present_map + */ + +void __init prom_build_cpu_map(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + extern int mipsmt_build_cpu_map(int startslot); + int nextslot; + + cpus_clear(phys_cpu_present_map); + + /* Register the boot CPU */ + + smp_prepare_boot_cpu(); + + /* + * As of November, 2004, MIPSsim only simulates one core + * at a time. However, that core may be a MIPS MT core + * with multiple virtual processors and thread contexts. + */ + + if (read_c0_config3() & (1<<2)) { + nextslot = mipsmt_build_cpu_map(1); + } +#endif /* CONFIG_MIPS_MT_SMTC */ +} + +/* + * Platform "CPU" startup hook + */ + +void prom_boot_secondary(int cpu, struct task_struct *idle) +{ +#ifdef CONFIG_MIPS_MT_SMTC + extern void smtc_boot_secondary(int cpu, struct task_struct *t); + + smtc_boot_secondary(cpu, idle); +#endif /* CONFIG_MIPS_MT_SMTC */ +} + +/* + * Post-config but pre-boot cleanup entry point + */ + +void prom_init_secondary(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + void smtc_init_secondary(void); + + smtc_init_secondary(); +#endif /* CONFIG_MIPS_MT_SMTC */ +} + +/* + * Platform SMP pre-initialization + */ + +void prom_prepare_cpus(unsigned int max_cpus) +{ +#ifdef CONFIG_MIPS_MT_SMTC + void mipsmt_prepare_cpus(int c); + /* + * As noted above, we can assume a single CPU for now + * but it may be multithreaded. + */ + + if (read_c0_config3() & (1<<2)) { + mipsmt_prepare_cpus(max_cpus); + } +#endif /* CONFIG_MIPS_MT_SMTC */ +} + +/* + * SMP initialization finalization entry point + */ + +void prom_smp_finish(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + void smtc_smp_finish(void); + + smtc_smp_finish(); +#endif /* CONFIG_MIPS_MT_SMTC */ +} + +/* + * Hook for after all CPUs are online + */ + +void prom_cpus_done(void) +{ +#ifdef CONFIG_MIPS_MT_SMTC + +#endif /* CONFIG_MIPS_MT_SMTC */ +} +#endif /* CONFIG_MIPS32R2_MT_SMP */ diff --git a/arch/mips/mips-boards/sim/sim_time.c b/arch/mips/mips-boards/sim/sim_time.c new file mode 100644 index 000000000000..18b968c696d1 --- /dev/null +++ b/arch/mips/mips-boards/sim/sim_time.c @@ -0,0 +1,215 @@ +#include <linux/types.h> +#include <linux/config.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/sched.h> +#include <linux/spinlock.h> + +#include <asm/mipsregs.h> +#include <asm/ptrace.h> +#include <asm/hardirq.h> +#include <asm/div64.h> +#include <asm/cpu.h> +#include <asm/time.h> + +#include <linux/interrupt.h> +#include <linux/mc146818rtc.h> +#include <linux/timex.h> +#include <asm/mipsregs.h> +#include <asm/ptrace.h> +#include <asm/hardirq.h> +#include <asm/irq.h> +#include <asm/div64.h> +#include <asm/cpu.h> +#include <asm/time.h> +#include <asm/mc146818-time.h> +#include <asm/msc01_ic.h> + +#include <asm/mips-boards/generic.h> +#include <asm/mips-boards/prom.h> +#include <asm/mips-boards/simint.h> +#include <asm/mc146818-time.h> +#include <asm/smp.h> + + +unsigned long cpu_khz; + +extern asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs); + +irqreturn_t sim_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ +#ifdef CONFIG_SMP + int cpu = smp_processor_id(); + + /* + * CPU 0 handles the global timer interrupt job + * resets count/compare registers to trigger next timer int. + */ +#ifndef CONFIG_MIPS_MT_SMTC + if (cpu == 0) { + timer_interrupt(irq, dev_id, regs); + } + else { + /* Everyone else needs to reset the timer int here as + ll_local_timer_interrupt doesn't */ + /* + * FIXME: need to cope with counter underflow. + * More support needs to be added to kernel/time for + * counter/timer interrupts on multiple CPU's + */ + write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ)); + } +#else /* SMTC */ + /* + * In SMTC system, one Count/Compare set exists per VPE. + * Which TC within a VPE gets the interrupt is essentially + * random - we only know that it shouldn't be one with + * IXMT set. Whichever TC gets the interrupt needs to + * send special interprocessor interrupts to the other + * TCs to make sure that they schedule, etc. + * + * That code is specific to the SMTC kernel, not to + * the simulation platform, so it's invoked from + * the general MIPS timer_interrupt routine. + * + * We have a problem in that the interrupt vector code + * had to turn off the timer IM bit to avoid redundant + * entries, but we may never get to mips_cpu_irq_end + * to turn it back on again if the scheduler gets + * involved. So we clear the pending timer here, + * and re-enable the mask... + */ + + int vpflags = dvpe(); + write_c0_compare (read_c0_count() - 1); + clear_c0_cause(0x100 << MIPSCPU_INT_CPUCTR); + set_c0_status(0x100 << MIPSCPU_INT_CPUCTR); + irq_enable_hazard(); + evpe(vpflags); + + if(cpu_data[cpu].vpe_id == 0) timer_interrupt(irq, dev_id, regs); + else write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ)); + smtc_timer_broadcast(cpu_data[cpu].vpe_id); + +#endif /* CONFIG_MIPS_MT_SMTC */ + + /* + * every CPU should do profiling and process accounting + */ + local_timer_interrupt (irq, dev_id, regs); + return IRQ_HANDLED; +#else + return timer_interrupt (irq, dev_id, regs); +#endif +} + + + +/* + * Estimate CPU frequency. Sets mips_counter_frequency as a side-effect + */ +static unsigned int __init estimate_cpu_frequency(void) +{ + unsigned int prid = read_c0_prid() & 0xffff00; + unsigned int count; + +#if 1 + /* + * hardwire the board frequency to 12MHz. + */ + + if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) || + (prid == (PRID_COMP_MIPS | PRID_IMP_25KF))) + count = 12000000; + else + count = 6000000; +#else + unsigned int flags; + + local_irq_save(flags); + + /* Start counter exactly on falling edge of update flag */ + while (CMOS_READ(RTC_REG_A) & RTC_UIP); + while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); + + /* Start r4k counter. */ + write_c0_count(0); + + /* Read counter exactly on falling edge of update flag */ + while (CMOS_READ(RTC_REG_A) & RTC_UIP); + while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); + + count = read_c0_count(); + + /* restore interrupts */ + local_irq_restore(flags); +#endif + + mips_hpt_frequency = count; + + if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) && + (prid != (PRID_COMP_MIPS | PRID_IMP_25KF))) + count *= 2; + + count += 5000; /* round */ + count -= count%10000; + + return count; +} + +void __init sim_time_init(void) +{ + unsigned int est_freq, flags; + + local_irq_save(flags); + + + /* Set Data mode - binary. */ + CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL); + + + est_freq = estimate_cpu_frequency (); + + printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, + (est_freq%1000000)*100/1000000); + + cpu_khz = est_freq / 1000; + + local_irq_restore(flags); +} + +static int mips_cpu_timer_irq; + +static void mips_timer_dispatch (struct pt_regs *regs) +{ + do_IRQ (mips_cpu_timer_irq, regs); +} + + +void __init sim_timer_setup(struct irqaction *irq) +{ + if (cpu_has_veic) { + set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch); + mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR; + } + else { + if (cpu_has_vint) + set_vi_handler(MIPSCPU_INT_CPUCTR, mips_timer_dispatch); + mips_cpu_timer_irq = MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR; + } + + /* we are using the cpu counter for timer interrupts */ + irq->handler = sim_timer_interrupt; + setup_irq(mips_cpu_timer_irq, irq); + +#ifdef CONFIG_SMP + /* irq_desc(riptor) is a global resource, when the interrupt overlaps + on seperate cpu's the first one tries to handle the second interrupt. + The effect is that the int remains disabled on the second cpu. + Mark the interrupt with IRQ_PER_CPU to avoid any confusion */ + irq_desc[mips_cpu_timer_irq].status |= IRQ_PER_CPU; +#endif + + /* to generate the first timer interrupt */ + write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ)); +} diff --git a/include/asm-mips/mach-sim/cpu-feature-overrides.h b/include/asm-mips/mach-sim/cpu-feature-overrides.h new file mode 100644 index 000000000000..09457217a57d --- /dev/null +++ b/include/asm-mips/mach-sim/cpu-feature-overrides.h @@ -0,0 +1,66 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 2004 Chris Dearman + */ +#ifndef __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_SIM_CPU_FEATURE_OVERRIDES_H + +#include <linux/config.h> + +/* + * CPU feature overrides for MIPS boards + */ +#ifdef CONFIG_CPU_MIPS32 +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4ktlb 1 +#define cpu_has_fpu 0 +/* #define cpu_has_32fpr ? */ +#define cpu_has_counter 1 +/* #define cpu_has_watch ? */ +#define cpu_has_divec 1 +#define cpu_has_vce 0 +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +/* #define cpu_has_prefetch ? */ +#define cpu_has_mcheck 1 +/* #define cpu_has_ejtag ? */ +#define cpu_has_llsc 1 +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +#define cpu_has_nofpuex 0 +/* #define cpu_has_64bits ? */ +/* #define cpu_has_64bit_zero_reg ? */ +/* #define cpu_has_subset_pcaches ? */ +#endif + +#ifdef CONFIG_CPU_MIPS64 +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4ktlb 1 +/* #define cpu_has_fpu ? */ +/* #define cpu_has_32fpr ? */ +#define cpu_has_counter 1 +/* #define cpu_has_watch ? */ +#define cpu_has_divec 1 +#define cpu_has_vce 0 +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +/* #define cpu_has_prefetch ? */ +#define cpu_has_mcheck 1 +/* #define cpu_has_ejtag ? */ +#define cpu_has_llsc 1 +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +#define cpu_has_nofpuex 0 +/* #define cpu_has_64bits ? */ +/* #define cpu_has_64bit_zero_reg ? */ +/* #define cpu_has_subset_pcaches ? */ +#endif + +#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mips-boards/sim.h b/include/asm-mips/mips-boards/sim.h new file mode 100644 index 000000000000..acb7c2331d98 --- /dev/null +++ b/include/asm-mips/mips-boards/sim.h @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ + +#ifndef _ASM_MIPS_BOARDS_SIM_H +#define _ASM_MIPS_BOARDS_SIM_H + +#define STATS_ON 1 +#define STATS_OFF 2 +#define STATS_CLEAR 3 +#define STATS_DUMP 4 +#define TRACE_ON 5 +#define TRACE_OFF 6 + + +#define simcfg(code) \ +({ \ + __asm__ __volatile__( \ + "sltiu $0,$0, %0" \ + ::"i"(code) \ + ); \ +}) + + + +#endif diff --git a/include/asm-mips/mips-boards/simint.h b/include/asm-mips/mips-boards/simint.h new file mode 100644 index 000000000000..4952e0b3bf11 --- /dev/null +++ b/include/asm-mips/mips-boards/simint.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#ifndef _MIPS_SIMINT_H +#define _MIPS_SIMINT_H + + +#define SIM_INT_BASE 0 +#define MIPSCPU_INT_MB0 2 +#define MIPSCPU_INT_BASE 16 +#define MIPS_CPU_TIMER_IRQ 7 + + +#define MIPSCPU_INT_CPUCTR 7 + +#define MSC01E_INT_BASE 64 + +#define MIPSCPU_INT_CPUCTR 7 +#define MSC01E_INT_CPUCTR 11 + +#endif |