diff options
| -rw-r--r-- | drivers/media/dvb/dvb-usb/dib0700_devices.c | 10 | ||||
| -rw-r--r-- | drivers/media/dvb/frontends/dib7000p.c | 7 | ||||
| -rw-r--r-- | drivers/media/dvb/frontends/dib8000.c | 1056 | ||||
| -rw-r--r-- | drivers/media/dvb/frontends/dib8000.h | 42 | ||||
| -rw-r--r-- | drivers/media/dvb/frontends/dibx000_common.h | 7 |
5 files changed, 1024 insertions, 98 deletions
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 845b11acfb59..b7b4b65fbeb3 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1279,7 +1279,7 @@ static int stk807x_frontend_attach(struct dvb_usb_adapter *adap) dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, - 0x80); + 0x80, 0); adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib807x_dib8000_config[0]); @@ -1308,7 +1308,7 @@ static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap) dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); /* initialize IC 0 */ - dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80); + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80, 0); adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib807x_dib8000_config[0]); @@ -1319,7 +1319,7 @@ static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap) static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap) { /* initialize IC 1 */ - dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82); + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82, 0); adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82, &dib807x_dib8000_config[1]); @@ -1578,7 +1578,7 @@ static int stk809x_frontend_attach(struct dvb_usb_adapter *adap) msleep(10); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80); + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80, 0); adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]); @@ -1629,7 +1629,7 @@ static int nim8096md_frontend_attach(struct dvb_usb_adapter *adap) msleep(20); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); - dib8000_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, 0x80); + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, 0x80, 0); adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]); if (adap->fe_adap[0].fe == NULL) diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c index 3ab695b0de3d..b5f3fb4f09ed 100644 --- a/drivers/media/dvb/frontends/dib7000p.c +++ b/drivers/media/dvb/frontends/dib7000p.c @@ -81,13 +81,6 @@ enum dib7000p_power_mode { }; /* dib7090 specific fonctions */ -#define MPEG_ON_DIBTX 1 -#define DIV_ON_DIBTX 2 -#define ADC_ON_DIBTX 3 -#define DEMOUT_ON_HOSTBUS 4 -#define DIBTX_ON_HOSTBUS 5 -#define MPEG_ON_HOSTBUS 6 - static int dib7090_set_output_mode(struct dvb_frontend *fe, int mode); static int dib7090_set_diversity_in(struct dvb_frontend *fe, int onoff); static void dib7090_setDibTxMux(struct dib7000p_state *state, int mode); diff --git a/drivers/media/dvb/frontends/dib8000.c b/drivers/media/dvb/frontends/dib8000.c index 96c6a61f5b06..b8da0c9e085e 100644 --- a/drivers/media/dvb/frontends/dib8000.c +++ b/drivers/media/dvb/frontends/dib8000.c @@ -81,11 +81,15 @@ struct dib8000_state { u8 i2c_write_buffer[4]; u8 i2c_read_buffer[2]; struct mutex i2c_buffer_lock; + u8 input_mode_mpeg; + + u16 tuner_enable; + struct i2c_adapter dib8096p_tuner_adap; }; enum dib8000_power_mode { - DIB8000M_POWER_ALL = 0, - DIB8000M_POWER_INTERFACE_ONLY, + DIB8000_POWER_ALL = 0, + DIB8000_POWER_INTERFACE_ONLY, }; static u16 dib8000_i2c_read16(struct i2c_device *i2c, u16 reg) @@ -428,20 +432,31 @@ static void dib8000_set_power_mode(struct dib8000_state *state, enum dib8000_pow /* by default everything is going to be powered off */ u16 reg_774 = 0x3fff, reg_775 = 0xffff, reg_776 = 0xffff, reg_900 = (dib8000_read_word(state, 900) & 0xfffc) | 0x3, + reg_1280; + + if (state->revision != 0x8090) reg_1280 = (dib8000_read_word(state, 1280) & 0x00ff) | 0xff00; + else + reg_1280 = (dib8000_read_word(state, 1280) & 0x707f) | 0x8f80; /* now, depending on the requested mode, we power on */ switch (mode) { /* power up everything in the demod */ - case DIB8000M_POWER_ALL: + case DIB8000_POWER_ALL: reg_774 = 0x0000; reg_775 = 0x0000; reg_776 = 0x0000; reg_900 &= 0xfffc; - reg_1280 &= 0x00ff; + if (state->revision != 0x8090) + reg_1280 &= 0x00ff; + else + reg_1280 &= 0x707f; break; - case DIB8000M_POWER_INTERFACE_ONLY: - reg_1280 &= 0x00ff; + case DIB8000_POWER_INTERFACE_ONLY: + if (state->revision != 0x8090) + reg_1280 &= 0x00ff; + else + reg_1280 &= 0xfa7b; break; } @@ -453,19 +468,67 @@ static void dib8000_set_power_mode(struct dib8000_state *state, enum dib8000_pow dib8000_write_word(state, 1280, reg_1280); } +static int dib8000_init_sdram(struct dib8000_state *state) +{ + u16 reg = 0; + dprintk("Init sdram"); + + reg = dib8000_read_word(state, 274)&0xfff0; + /* P_dintlv_delay_ram = 7 because of MobileSdram */ + dib8000_write_word(state, 274, reg | 0x7); + + dib8000_write_word(state, 1803, (7<<2)); + + reg = dib8000_read_word(state, 1280); + /* force restart P_restart_sdram */ + dib8000_write_word(state, 1280, reg | (1<<2)); + + /* release restart P_restart_sdram */ + dib8000_write_word(state, 1280, reg); + + return 0; +} + static int dib8000_set_adc_state(struct dib8000_state *state, enum dibx000_adc_states no) { int ret = 0; - u16 reg_907 = dib8000_read_word(state, 907), reg_908 = dib8000_read_word(state, 908); + u16 reg, reg_907 = dib8000_read_word(state, 907); + u16 reg_908 = dib8000_read_word(state, 908); switch (no) { case DIBX000_SLOW_ADC_ON: - reg_908 |= (1 << 1) | (1 << 0); - ret |= dib8000_write_word(state, 908, reg_908); - reg_908 &= ~(1 << 1); + if (state->revision != 0x8090) { + reg_908 |= (1 << 1) | (1 << 0); + ret |= dib8000_write_word(state, 908, reg_908); + reg_908 &= ~(1 << 1); + } else { + reg = dib8000_read_word(state, 1925); + /* en_slowAdc = 1 & reset_sladc = 1 */ + dib8000_write_word(state, 1925, reg | + (1<<4) | (1<<2)); + + /* read acces to make it works... strange ... */ + reg = dib8000_read_word(state, 1925); + msleep(20); + /* en_slowAdc = 1 & reset_sladc = 0 */ + dib8000_write_word(state, 1925, reg & ~(1<<4)); + + reg = dib8000_read_word(state, 921) & ~((0x3 << 14) + | (0x3 << 12)); + /* ref = Vin1 => Vbg ; sel = Vin0 or Vin3 ; + (Vin2 = Vcm) */ + dib8000_write_word(state, 921, reg | (1 << 14) + | (3 << 12)); + } break; case DIBX000_SLOW_ADC_OFF: + if (state->revision == 0x8090) { + reg = dib8000_read_word(state, 1925); + /* reset_sladc = 1 en_slowAdc = 0 */ + dib8000_write_word(state, 1925, + (reg & ~(1<<2)) | (1<<4)); + } reg_908 |= (1 << 1) | (1 << 0); break; @@ -521,7 +584,12 @@ static int dib8000_set_bandwidth(struct dvb_frontend *fe, u32 bw) static int dib8000_sad_calib(struct dib8000_state *state) { -/* internal */ + if (state->revision == 0x8090) { + dprintk("%s: the sad calibration is not needed for the dib8096P", + __func__); + return 0; + } + /* internal */ dib8000_write_word(state, 923, (0 << 1) | (0 << 0)); dib8000_write_word(state, 924, 776); // 0.625*3.3 / 4096 @@ -546,48 +614,129 @@ EXPORT_SYMBOL(dib8000_set_wbd_ref); static void dib8000_reset_pll_common(struct dib8000_state *state, const struct dibx000_bandwidth_config *bw) { dprintk("ifreq: %d %x, inversion: %d", bw->ifreq, bw->ifreq, bw->ifreq >> 25); - dib8000_write_word(state, 23, (u16) (((bw->internal * 1000) >> 16) & 0xffff)); /* P_sec_len */ - dib8000_write_word(state, 24, (u16) ((bw->internal * 1000) & 0xffff)); + if (state->revision != 0x8090) { + dib8000_write_word(state, 23, + (u16) (((bw->internal * 1000) >> 16) & 0xffff)); + dib8000_write_word(state, 24, + (u16) ((bw->internal * 1000) & 0xffff)); + } else { + dib8000_write_word(state, 23, (u16) (((bw->internal / 2 * 1000) >> 16) & 0xffff)); + dib8000_write_word(state, 24, + (u16) ((bw->internal / 2 * 1000) & 0xffff)); + } dib8000_write_word(state, 27, (u16) ((bw->ifreq >> 16) & 0x01ff)); dib8000_write_word(state, 28, (u16) (bw->ifreq & 0xffff)); dib8000_write_word(state, 26, (u16) ((bw->ifreq >> 25) & 0x0003)); - dib8000_write_word(state, 922, bw->sad_cfg); + if (state->revision != 0x8090) + dib8000_write_word(state, 922, bw->sad_cfg); } static void dib8000_reset_pll(struct dib8000_state *state) { const struct dibx000_bandwidth_config *pll = state->cfg.pll; - u16 clk_cfg1; - - // clk_cfg0 - dib8000_write_word(state, 901, (pll->pll_prediv << 8) | (pll->pll_ratio << 0)); - - // clk_cfg1 - clk_cfg1 = (1 << 10) | (0 << 9) | (pll->IO_CLK_en_core << 8) | - (pll->bypclk_div << 5) | (pll->enable_refdiv << 4) | (1 << 3) | - (pll->pll_range << 1) | (pll->pll_reset << 0); - - dib8000_write_word(state, 902, clk_cfg1); - clk_cfg1 = (clk_cfg1 & 0xfff7) | (pll->pll_bypass << 3); - dib8000_write_word(state, 902, clk_cfg1); - - dprintk("clk_cfg1: 0x%04x", clk_cfg1); /* 0x507 1 0 1 000 0 0 11 1 */ - - /* smpl_cfg: P_refclksel=2, P_ensmplsel=1 nodivsmpl=1 */ - if (state->cfg.pll->ADClkSrc == 0) - dib8000_write_word(state, 904, (0 << 15) | (0 << 12) | (0 << 10) | - (pll->modulo << 8) | (pll->ADClkSrc << 7) | (0 << 1)); - else if (state->cfg.refclksel != 0) - dib8000_write_word(state, 904, (0 << 15) | (1 << 12) | - ((state->cfg.refclksel & 0x3) << 10) | (pll->modulo << 8) | - (pll->ADClkSrc << 7) | (0 << 1)); - else - dib8000_write_word(state, 904, (0 << 15) | (1 << 12) | (3 << 10) | (pll->modulo << 8) | (pll->ADClkSrc << 7) | (0 << 1)); + u16 clk_cfg1, reg; + + if (state->revision != 0x8090) { + dib8000_write_word(state, 901, + (pll->pll_prediv << 8) | (pll->pll_ratio << 0)); + + clk_cfg1 = (1 << 10) | (0 << 9) | (pll->IO_CLK_en_core << 8) | + (pll->bypclk_div << 5) | (pll->enable_refdiv << 4) | + (1 << 3) | (pll->pll_range << 1) | + (pll->pll_reset << 0); + + dib8000_write_word(state, 902, clk_cfg1); + clk_cfg1 = (clk_cfg1 & 0xfff7) | (pll->pll_bypass << 3); + dib8000_write_word(state, 902, clk_cfg1); + + dprintk("clk_cfg1: 0x%04x", clk_cfg1); + + /* smpl_cfg: P_refclksel=2, P_ensmplsel=1 nodivsmpl=1 */ + if (state->cfg.pll->ADClkSrc == 0) + dib8000_write_word(state, 904, + (0 << 15) | (0 << 12) | (0 << 10) | + (pll->modulo << 8) | + (pll->ADClkSrc << 7) | (0 << 1)); + else if (state->cfg.refclksel != 0) + dib8000_write_word(state, 904, (0 << 15) | (1 << 12) | + ((state->cfg.refclksel & 0x3) << 10) | + (pll->modulo << 8) | + (pll->ADClkSrc << 7) | (0 << 1)); + else + dib8000_write_word(state, 904, (0 << 15) | (1 << 12) | + (3 << 10) | (pll->modulo << 8) | + (pll->ADClkSrc << 7) | (0 << 1)); + } else { + dib8000_write_word(state, 1856, (!pll->pll_reset<<13) | + (pll->pll_range<<12) | (pll->pll_ratio<<6) | + (pll->pll_prediv)); + + reg = dib8000_read_word(state, 1857); + dib8000_write_word(state, 1857, reg|(!pll->pll_bypass<<15)); + + reg = dib8000_read_word(state, 1858); /* Force clk out pll /2 */ + dib8000_write_word(state, 1858, reg | 1); + + dib8000_write_word(state, 904, (pll->modulo << 8)); + } dib8000_reset_pll_common(state, pll); } +int dib8000_update_pll(struct dvb_frontend *fe, + struct dibx000_bandwidth_config *pll) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 reg_1857, reg_1856 = dib8000_read_word(state, 1856); + u8 loopdiv, prediv; + u32 internal, xtal; + + /* get back old values */ + prediv = reg_1856 & 0x3f; + loopdiv = (reg_1856 >> 6) & 0x3f; + + if ((pll != NULL) && (pll->pll_prediv != prediv || + pll->pll_ratio != loopdiv)) { + dprintk("Updating pll (prediv: old = %d new = %d ; loopdiv : old = %d new = %d)", prediv, pll->pll_prediv, loopdiv, pll->pll_ratio); + reg_1856 &= 0xf000; + reg_1857 = dib8000_read_word(state, 1857); + /* disable PLL */ + dib8000_write_word(state, 1857, reg_1857 & ~(1 << 15)); + + dib8000_write_word(state, 1856, reg_1856 | + ((pll->pll_ratio & 0x3f) << 6) | + (pll->pll_prediv & 0x3f)); + + /* write new system clk into P_sec_len */ + internal = dib8000_read32(state, 23) / 1000; + dprintk("Old Internal = %d", internal); + xtal = 2 * (internal / loopdiv) * prediv; + internal = 1000 * (xtal/pll->pll_prediv) * pll->pll_ratio; + dprintk("Xtal = %d , New Fmem = %d New Fdemod = %d, New Fsampling = %d", xtal, internal/1000, internal/2000, internal/8000); + dprintk("New Internal = %d", internal); + + dib8000_write_word(state, 23, + (u16) (((internal / 2) >> 16) & 0xffff)); + dib8000_write_word(state, 24, (u16) ((internal / 2) & 0xffff)); + /* enable PLL */ + dib8000_write_word(state, 1857, reg_1857 | (1 << 15)); + + while (((dib8000_read_word(state, 1856)>>15)&0x1) != 1) + dprintk("Waiting for PLL to lock"); + + /* verify */ + reg_1856 = dib8000_read_word(state, 1856); + dprintk("PLL Updated with prediv = %d and loopdiv = %d", + reg_1856&0x3f, (reg_1856>>6)&0x3f); + + return 0; + } + return -EINVAL; +} +EXPORT_SYMBOL(dib8000_update_pll); + + static int dib8000_reset_gpio(struct dib8000_state *st) { /* reset the GPIOs */ @@ -721,9 +870,6 @@ static const u16 dib8000_defaults[] = { (3 << 5) | /* P_ctrl_pre_freq_step=3 */ (1 << 0), /* P_pre_freq_win_len=1 */ - 1, 903, - (0 << 4) | 2, // P_divclksel=0 P_divbitsel=2 (was clk=3,bit=1 for MPW) - 0, }; @@ -740,7 +886,8 @@ static u16 dib8000_identify(struct i2c_device *client) } value = dib8000_i2c_read16(client, 897); - if (value != 0x8000 && value != 0x8001 && value != 0x8002) { + if (value != 0x8000 && value != 0x8001 && + value != 0x8002 && value != 0x8090) { dprintk("wrong Device ID (%x)", value); return 0; } @@ -755,6 +902,9 @@ static u16 dib8000_identify(struct i2c_device *client) case 0x8002: dprintk("found DiB8000C"); break; + case 0x8090: + dprintk("found DiB8096P"); + break; } return value; } @@ -763,17 +913,19 @@ static int dib8000_reset(struct dvb_frontend *fe) { struct dib8000_state *state = fe->demodulator_priv; - dib8000_write_word(state, 1287, 0x0003); /* sram lead in, rdy */ - if ((state->revision = dib8000_identify(&state->i2c)) == 0) return -EINVAL; + /* sram lead in, rdy */ + if (state->revision != 0x8090) + dib8000_write_word(state, 1287, 0x0003); + if (state->revision == 0x8000) dprintk("error : dib8000 MA not supported"); dibx000_reset_i2c_master(&state->i2c_master); - dib8000_set_power_mode(state, DIB8000M_POWER_ALL); + dib8000_set_power_mode(state, DIB8000_POWER_ALL); /* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */ dib8000_set_adc_state(state, DIBX000_VBG_ENABLE); @@ -782,8 +934,10 @@ static int dib8000_reset(struct dvb_frontend *fe) dib8000_write_word(state, 770, 0xffff); dib8000_write_word(state, 771, 0xffff); dib8000_write_word(state, 772, 0xfffc); - dib8000_write_word(state, 898, 0x000c); // sad - dib8000_write_word(state, 1280, 0x004d); + if (state->revision == 0x8090) + dib8000_write_word(state, 1280, 0x0045); + else + dib8000_write_word(state, 1280, 0x004d); dib8000_write_word(state, 1281, 0x000c); dib8000_write_word(state, 770, 0x0000); @@ -794,19 +948,25 @@ static int dib8000_reset(struct dvb_frontend *fe) dib8000_write_word(state, 1281, 0x0000); /* drives */ - if (state->cfg.drives) - dib8000_write_word(state, 906, state->cfg.drives); - else { - dprintk("using standard PAD-drive-settings, please adjust settings in config-struct to be optimal."); - dib8000_write_word(state, 906, 0x2d98); // min drive SDRAM - not optimal - adjust + if (state->revision != 0x8090) { + if (state->cfg.drives) + dib8000_write_word(state, 906, state->cfg.drives); + else { + dprintk("using standard PAD-drive-settings, please adjust settings in config-struct to be optimal."); + /* min drive SDRAM - not optimal - adjust */ + dib8000_write_word(state, 906, 0x2d98); + } } dib8000_reset_pll(state); + if (state->revision != 0x8090) + dib8000_write_word(state, 898, 0x0004); if (dib8000_reset_gpio(state) != 0) dprintk("GPIO reset was not successful."); - if (dib8000_set_output_mode(fe, OUTMODE_HIGH_Z) != 0) + if ((state->revision != 0x8090) && + (dib8000_set_output_mode(fe, OUTMODE_HIGH_Z) != 0)) dprintk("OUTPUT_MODE could not be resetted."); state->current_agc = NULL; @@ -832,6 +992,8 @@ static int dib8000_reset(struct dvb_frontend *fe) l = *n++; } } + if (state->revision != 0x8090) + dib8000_write_word(state, 903, (0 << 4) | 2); state->isdbt_cfg_loaded = 0; //div_cfg override for special configs @@ -844,10 +1006,12 @@ static int dib8000_reset(struct dvb_frontend *fe) dib8000_set_bandwidth(fe, 6000); dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON); - dib8000_sad_calib(state); - dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF); + if (state->revision != 0x8090) { + dib8000_sad_calib(state); + dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF); + } - dib8000_set_power_mode(state, DIB8000M_POWER_INTERFACE_ONLY); + dib8000_set_power_mode(state, DIB8000_POWER_INTERFACE_ONLY); return 0; } @@ -879,6 +1043,8 @@ static int dib8000_set_agc_config(struct dib8000_state *state, u8 band) { struct dibx000_agc_config *agc = NULL; int i; + u16 reg; + if (state->current_band == band && state->current_agc != NULL) return 0; state->current_band = band; @@ -914,6 +1080,12 @@ static int dib8000_set_agc_config(struct dib8000_state *state, u8 band) dib8000_write_word(state, 106, state->wbd_ref); else // use default dib8000_write_word(state, 106, agc->wbd_ref); + + if (state->revision == 0x8090) { + reg = dib8000_read_word(state, 922) & (0x3 << 2); + dib8000_write_word(state, 922, reg | (agc->wbd_sel << 2)); + } + dib8000_write_word(state, 107, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8)); dib8000_write_word(state, 108, agc->agc1_max); dib8000_write_word(state, 109, agc->agc1_min); @@ -925,7 +1097,10 @@ static int dib8000_set_agc_config(struct dib8000_state *state, u8 band) dib8000_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2); dib8000_write_word(state, 75, agc->agc1_pt3); - dib8000_write_word(state, 923, (dib8000_read_word(state, 923) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2)); /*LB : 929 -> 923 */ + if (state->revision != 0x8090) + dib8000_write_word(state, 923, + (dib8000_read_word(state, 923) & 0xffe3) | + (agc->wbd_inv << 4) | (agc->wbd_sel << 2)); return 0; } @@ -968,14 +1143,30 @@ static int dib8000_agc_startup(struct dvb_frontend *fe) { struct dib8000_state *state = fe->demodulator_priv; enum frontend_tune_state *tune_state = &state->tune_state; - int ret = 0; + u16 reg, upd_demod_gain_period = 0x8000; switch (*tune_state) { case CT_AGC_START: // set power-up level: interf+analog+AGC - dib8000_set_adc_state(state, DIBX000_ADC_ON); + if (state->revision != 0x8090) + dib8000_set_adc_state(state, DIBX000_ADC_ON); + else { + dib8000_set_power_mode(state, DIB8000_POWER_ALL); + + reg = dib8000_read_word(state, 1947)&0xff00; + dib8000_write_word(state, 1946, + upd_demod_gain_period & 0xFFFF); + /* bit 14 = enDemodGain */ + dib8000_write_word(state, 1947, reg | (1<<14) | + ((upd_demod_gain_period >> 16) & 0xFF)); + + /* enable adc i & q */ + reg = dib8000_read_word(state, 1920); + dib8000_write_word(state, 1920, (reg | 0x3) & + (~(1 << 7))); + } if (dib8000_set_agc_config(state, (unsigned char)(BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000))) != 0) { *tune_state = CT_AGC_STOP; @@ -1026,6 +1217,579 @@ static int dib8000_agc_startup(struct dvb_frontend *fe) } +static void dib8096p_host_bus_drive(struct dib8000_state *state, u8 drive) +{ + u16 reg; + + drive &= 0x7; + + /* drive host bus 2, 3, 4 */ + reg = dib8000_read_word(state, 1798) & + ~(0x7 | (0x7 << 6) | (0x7 << 12)); + reg |= (drive<<12) | (drive<<6) | drive; + dib8000_write_word(state, 1798, reg); + + /* drive host bus 5,6 */ + reg = dib8000_read_word(state, 1799) & ~((0x7 << 2) | (0x7 << 8)); + reg |= (drive<<8) | (drive<<2); + dib8000_write_word(state, 1799, reg); + + /* drive host bus 7, 8, 9 */ + reg = dib8000_read_word(state, 1800) & + ~(0x7 | (0x7 << 6) | (0x7 << 12)); + reg |= (drive<<12) | (drive<<6) | drive; + dib8000_write_word(state, 1800, reg); + + /* drive host bus 10, 11 */ + reg = dib8000_read_word(state, 1801) & ~((0x7 << 2) | (0x7 << 8)); + reg |= (drive<<8) | (drive<<2); + dib8000_write_word(state, 1801, reg); + + /* drive host bus 12, 13, 14 */ + reg = dib8000_read_word(state, 1802) & + ~(0x7 | (0x7 << 6) | (0x7 << 12)); + reg |= (drive<<12) | (drive<<6) | drive; + dib8000_write_word(state, 1802, reg); +} + +static u32 dib8096p_calcSyncFreq(u32 P_Kin, u32 P_Kout, + u32 insertExtSynchro, u32 syncSize) +{ + u32 quantif = 3; + u32 nom = (insertExtSynchro * P_Kin+syncSize); + u32 denom = P_Kout; + u32 syncFreq = ((nom << quantif) / denom); + + if ((syncFreq & ((1 << quantif) - 1)) != 0) + syncFreq = (syncFreq >> quantif) + 1; + else + syncFreq = (syncFreq >> quantif); + + if (syncFreq != 0) + syncFreq = syncFreq - 1; + + return syncFreq; +} + +static void dib8096p_cfg_DibTx(struct dib8000_state *state, u32 P_Kin, + u32 P_Kout, u32 insertExtSynchro, u32 synchroMode, + u32 syncWord, u32 syncSize) +{ + dprintk("Configure DibStream Tx"); + + dib8000_write_word(state, 1615, 1); + dib8000_write_word(state, 1603, P_Kin); + dib8000_write_word(state, 1605, P_Kout); + dib8000_write_word(state, 1606, insertExtSynchro); + dib8000_write_word(state, 1608, synchroMode); + dib8000_write_word(state, 1609, (syncWord >> 16) & 0xffff); + dib8000_write_word(state, 1610, syncWord & 0xffff); + dib8000_write_word(state, 1612, syncSize); + dib8000_write_word(state, 1615, 0); +} + +static void dib8096p_cfg_DibRx(struct dib8000_state *state, u32 P_Kin, + u32 P_Kout, u32 synchroMode, u32 insertExtSynchro, + u32 syncWord, u32 syncSize, u32 dataOutRate) +{ + u32 syncFreq; + + dprintk("Configure DibStream Rx synchroMode = %d", synchroMode); + + if ((P_Kin != 0) && (P_Kout != 0)) { + syncFreq = dib8096p_calcSyncFreq(P_Kin, P_Kout, + insertExtSynchro, syncSize); + dib8000_write_word(state, 1542, syncFreq); + } + + dib8000_write_word(state, 1554, 1); + dib8000_write_word(state, 1536, P_Kin); + dib8000_write_word(state, 1537, P_Kout); + dib8000_write_word(state, 1539, synchroMode); + dib8000_write_word(state, 1540, (syncWord >> 16) & 0xffff); + dib8000_write_word(state, 1541, syncWord & 0xffff); + dib8000_write_word(state, 1543, syncSize); + dib8000_write_word(state, 1544, dataOutRate); + dib8000_write_word(state, 1554, 0); +} + +static void dib8096p_enMpegMux(struct dib8000_state *state, int onoff) +{ + u16 reg_1287; + + reg_1287 = dib8000_read_word(state, 1287); + + switch (onoff) { + case 1: + reg_1287 &= ~(1 << 8); + break; + case 0: + reg_1287 |= (1 << 8); + break; + } + + dib8000_write_word(state, 1287, reg_1287); +} + +static void dib8096p_configMpegMux(struct dib8000_state *state, + u16 pulseWidth, u16 enSerialMode, u16 enSerialClkDiv2) +{ + u16 reg_1287; + + dprintk("Enable Mpeg mux"); + + dib8096p_enMpegMux(state, 0); + + /* If the input mode is MPEG do not divide the serial clock */ + if ((enSerialMode == 1) && (state->input_mode_mpeg == 1)) + enSerialClkDiv2 = 0; + + reg_1287 = ((pulseWidth & 0x1f) << 3) | + ((enSerialMode & 0x1) << 2) | (enSerialClkDiv2 & 0x1); + dib8000_write_word(state, 1287, reg_1287); + + dib8096p_enMpegMux(state, 1); +} + +static void dib8096p_setDibTxMux(struct dib8000_state *state, int mode) +{ + u16 reg_1288 = dib8000_read_word(state, 1288) & ~(0x7 << 7); + + switch (mode) { + case MPEG_ON_DIBTX: + dprintk("SET MPEG ON DIBSTREAM TX"); + dib8096p_cfg_DibTx(state, 8, 5, 0, 0, 0, 0); + reg_1288 |= (1 << 9); break; + case DIV_ON_DIBTX: + dprintk("SET DIV_OUT ON DIBSTREAM TX"); + dib8096p_cfg_DibTx(state, 5, 5, 0, 0, 0, 0); + reg_1288 |= (1 << 8); break; + case ADC_ON_DIBTX: + dprintk("SET ADC_OUT ON DIBSTREAM TX"); + dib8096p_cfg_DibTx(state, 20, 5, 10, 0, 0, 0); + reg_1288 |= (1 << 7); break; + default: + break; + } + dib8000_write_word(state, 1288, reg_1288); +} + +static void dib8096p_setHostBusMux(struct dib8000_state *state, int mode) +{ + u16 reg_1288 = dib8000_read_word(state, 1288) & ~(0x7 << 4); + + switch (mode) { + case DEMOUT_ON_HOSTBUS: + dprintk("SET DEM OUT OLD INTERF ON HOST BUS"); + dib8096p_enMpegMux(state, 0); + reg_1288 |= (1 << 6); + break; + case DIBTX_ON_HOSTBUS: + dprintk("SET DIBSTREAM TX ON HOST BUS"); + dib8096p_enMpegMux(state, 0); + reg_1288 |= (1 << 5); + break; + case MPEG_ON_HOSTBUS: + dprintk("SET MPEG MUX ON HOST BUS"); + reg_1288 |= (1 << 4); + break; + default: + break; + } + dib8000_write_word(state, 1288, reg_1288); +} + +static int dib8096p_set_diversity_in(struct dvb_frontend *fe, int onoff) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 reg_1287; + + switch (onoff) { + case 0: /* only use the internal way - not the diversity input */ + dprintk("%s mode OFF : by default Enable Mpeg INPUT", + __func__); + /* outputRate = 8 */ + dib8096p_cfg_DibRx(state, 8, 5, 0, 0, 0, 8, 0); + + /* Do not divide the serial clock of MPEG MUX in + SERIAL MODE in case input mode MPEG is used */ + reg_1287 = dib8000_read_word(state, 1287); + /* enSerialClkDiv2 == 1 ? */ + if ((reg_1287 & 0x1) == 1) { + /* force enSerialClkDiv2 = 0 */ + reg_1287 &= ~0x1; + dib8000_write_word(state, 1287, reg_1287); + } + state->input_mode_mpeg = 1; + break; + case 1: /* both ways */ + case 2: /* only the diversity input */ + dprintk("%s ON : Enable diversity INPUT", __func__); + dib8096p_cfg_DibRx(state, 5, 5, 0, 0, 0, 0, 0); + state->input_mode_mpeg = 0; + break; + } + + dib8000_set_diversity_in(state->fe[0], onoff); + return 0; +} + +static int dib8096p_set_output_mode(struct dvb_frontend *fe, int mode) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 outreg, smo_mode, fifo_threshold; + u8 prefer_mpeg_mux_use = 1; + int ret = 0; + + dib8096p_host_bus_drive(state, 1); + + fifo_threshold = 1792; + smo_mode = (dib8000_read_word(state, 299) & 0x0050) | (1 << 1); + outreg = dib8000_read_word(state, 1286) & + ~((1 << 10) | (0x7 << 6) | (1 << 1)); + + switch (mode) { + case OUTMODE_HIGH_Z: + outreg = 0; + break; + + case OUTMODE_MPEG2_SERIAL: + if (prefer_mpeg_mux_use) { + dprintk("dib8096P setting output mode TS_SERIAL using Mpeg Mux"); + dib8096p_configMpegMux(state, 3, 1, 1); + dib8096p_setHostBusMux(state, MPEG_ON_HOSTBUS); + } else {/* Use Smooth block */ + dprintk("dib8096P setting output mode TS_SERIAL using Smooth bloc"); + dib8096p_setHostBusMux(state, + DEMOUT_ON_HOSTBUS); + outreg |= (2 << 6) | (0 << 1); + } + break; + + case OUTMODE_MPEG2_PAR_GATED_CLK: + if (prefer_mpeg_mux_use) { + dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Mpeg Mux"); + dib8096p_configMpegMux(state, 2, 0, 0); + dib8096p_setHostBusMux(state, MPEG_ON_HOSTBUS); + } else { /* Use Smooth block */ + dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Smooth block"); + dib8096p_setHostBusMux(state, + DEMOUT_ON_HOSTBUS); + outreg |= (0 << 6); + } + break; + + case OUTMODE_MPEG2_PAR_CONT_CLK: /* Using Smooth block only */ + dprintk("dib8096P setting output mode TS_PARALLEL_CONT using Smooth block"); + dib8096p_setHostBusMux(state, DEMOUT_ON_HOSTBUS); + outreg |= (1 << 6); + break; + + case OUTMODE_MPEG2_FIFO: + /* Using Smooth block because not supported + by new Mpeg Mux bloc */ + dprintk("dib8096P setting output mode TS_FIFO using Smooth block"); + dib8096p_setHostBusMux(state, DEMOUT_ON_HOSTBUS); + outreg |= (5 << 6); + smo_mode |= (3 << 1); + fifo_threshold = 512; + break; + + case OUTMODE_DIVERSITY: + dprintk("dib8096P setting output mode MODE_DIVERSITY"); + dib8096p_setDibTxMux(state, DIV_ON_DIBTX); + dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS); + break; + + case OUTMODE_ANALOG_ADC: + dprintk("dib8096P setting output mode MODE_ANALOG_ADC"); + dib8096p_setDibTxMux(state, ADC_ON_DIBTX); + dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS); + break; + } + + if (mode != OUTMODE_HIGH_Z) + outreg |= (1<<10); + + dprintk("output_mpeg2_in_188_bytes = %d", + state->cfg.output_mpeg2_in_188_bytes); + if (state->cfg.output_mpeg2_in_188_bytes) + smo_mode |= (1 << 5); + + ret |= dib8000_write_word(state, 299, smo_mode); + /* synchronous fread */ + ret |= dib8000_write_word(state, 299 + 1, fifo_threshold); + ret |= dib8000_write_word(state, 1286, outreg); + + return ret; +} + +static int map_addr_to_serpar_number(struct i2c_msg *msg) +{ + if (msg->buf[0] <= 15) + msg->buf[0] -= 1; + else if (msg->buf[0] == 17) + msg->buf[0] = 15; + else if (msg->buf[0] == 16) + msg->buf[0] = 17; + else if (msg->buf[0] == 19) + msg->buf[0] = 16; + else if (msg->buf[0] >= 21 && msg->buf[0] <= 25) + msg->buf[0] -= 3; + else if (msg->buf[0] == 28) + msg->buf[0] = 23; + else if (msg->buf[0] == 99) + msg->buf[0] = 99; + else + return -EINVAL; + return 0; +} + +static int dib8096p_tuner_write_serpar(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct dib8000_state *state = i2c_get_adapdata(i2c_adap); + u8 n_overflow = 1; + u16 i = 1000; + u16 serpar_num = msg[0].buf[0]; + + while (n_overflow == 1 && i) { + n_overflow = (dib8000_read_word(state, 1984) >> 1) & 0x1; + i--; + if (i == 0) + dprintk("Tuner ITF: write busy (overflow)"); + } + dib8000_write_word(state, 1985, (1 << 6) | (serpar_num & 0x3f)); + dib8000_write_word(state, 1986, (msg[0].buf[1] << 8) | msg[0].buf[2]); + + return num; +} + +static int dib8096p_tuner_read_serpar(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct dib8000_state *state = i2c_get_adapdata(i2c_adap); + u8 n_overflow = 1, n_empty = 1; + u16 i = 1000; + u16 serpar_num = msg[0].buf[0]; + u16 read_word; + + while (n_overflow == 1 && i) { + n_overflow = (dib8000_read_word(state, 1984) >> 1) & 0x1; + i--; + if (i == 0) + dprintk("TunerITF: read busy (overflow)"); + } + dib8000_write_word(state, 1985, (0<<6) | (serpar_num&0x3f)); + + i = 1000; + while (n_empty == 1 && i) { + n_empty = dib8000_read_word(state, 1984)&0x1; + i--; + if (i == 0) + dprintk("TunerITF: read busy (empty)"); + } + + read_word = dib8000_read_word(state, 1987); + msg[1].buf[0] = (read_word >> 8) & 0xff; + msg[1].buf[1] = (read_word) & 0xff; + + return num; +} + +static int dib8096p_tuner_rw_serpar(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + if (map_addr_to_serpar_number(&msg[0]) == 0) { + if (num == 1) /* write */ + return dib8096p_tuner_write_serpar(i2c_adap, msg, 1); + else /* read */ + return dib8096p_tuner_read_serpar(i2c_adap, msg, 2); + } + return num; +} + +static int dib8096p_rw_on_apb(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num, u16 apb_address) +{ + struct dib8000_state *state = i2c_get_adapdata(i2c_adap); + u16 word; + + if (num == 1) { /* write */ + dib8000_write_word(state, apb_address, + ((msg[0].buf[1] << 8) | (msg[0].buf[2]))); + } else { + word = dib8000_read_word(state, apb_address); + msg[1].buf[0] = (word >> 8) & 0xff; + msg[1].buf[1] = (word) & 0xff; + } + return num; +} + +static int dib8096p_tuner_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct dib8000_state *state = i2c_get_adapdata(i2c_adap); + u16 apb_address = 0, word; + int i = 0; + + switch (msg[0].buf[0]) { + case 0x12: + apb_address = 1920; + break; + case 0x14: + apb_address = 1921; + break; + case 0x24: + apb_address = 1922; + break; + case 0x1a: + apb_address = 1923; + break; + case 0x22: + apb_address = 1924; + break; + case 0x33: + apb_address = 1926; + break; + case 0x34: + apb_address = 1927; + break; + case 0x35: + apb_address = 1928; + break; + case 0x36: + apb_address = 1929; + break; + case 0x37: + apb_address = 1930; + break; + case 0x38: + apb_address = 1931; + break; + case 0x39: + apb_address = 1932; + break; + case 0x2a: + apb_address = 1935; + break; + case 0x2b: + apb_address = 1936; + break; + case 0x2c: + apb_address = 1937; + break; + case 0x2d: + apb_address = 1938; + break; + case 0x2e: + apb_address = 1939; + break; + case 0x2f: + apb_address = 1940; + break; + case 0x30: + apb_address = 1941; + break; + case 0x31: + apb_address = 1942; + break; + case 0x32: + apb_address = 1943; + break; + case 0x3e: + apb_address = 1944; + break; + case 0x3f: + apb_address = 1945; + break; + case 0x40: + apb_address = 1948; + break; + case 0x25: + apb_address = 936; + break; + case 0x26: + apb_address = 937; + break; + case 0x27: + apb_address = 938; + break; + case 0x28: + apb_address = 939; + break; + case 0x1d: + /* get sad sel request */ + i = ((dib8000_read_word(state, 921) >> 12)&0x3); + word = dib8000_read_word(state, 924+i); + msg[1].buf[0] = (word >> 8) & 0xff; + msg[1].buf[1] = (word) & 0xff; + return num; + case 0x1f: + if (num == 1) { /* write */ + word = (u16) ((msg[0].buf[1] << 8) | + msg[0].buf[2]); + /* in the VGAMODE Sel are located on bit 0/1 */ + word &= 0x3; + word = (dib8000_read_word(state, 921) & + ~(3<<12)) | (word<<12); + /* Set the proper input */ + dib8000_write_word(state, 921, word); + return num; + } + } + + if (apb_address != 0) /* R/W acces via APB */ + return dib8096p_rw_on_apb(i2c_adap, msg, num, apb_address); + else /* R/W access via SERPAR */ + return dib8096p_tuner_rw_serpar(i2c_adap, msg, num); + + return 0; +} + +static u32 dib8096p_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm dib8096p_tuner_xfer_algo = { + .master_xfer = dib8096p_tuner_xfer, + .functionality = dib8096p_i2c_func, +}; + +struct i2c_adapter *dib8096p_get_i2c_tuner(struct dvb_frontend *fe) +{ + struct dib8000_state *st = fe->demodulator_priv; + return &st->dib8096p_tuner_adap; +} +EXPORT_SYMBOL(dib8096p_get_i2c_tuner); + +int dib8096p_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 en_cur_state; + + dprintk("sleep dib8096p: %d", onoff); + + en_cur_state = dib8000_read_word(state, 1922); + + /* LNAs and MIX are ON and therefore it is a valid configuration */ + if (en_cur_state > 0xff) + state->tuner_enable = en_cur_state ; + + if (onoff) + en_cur_state &= 0x00ff; + else { + if (state->tuner_enable != 0) + en_cur_state = state->tuner_enable; + } + + dib8000_write_word(state, 1922, en_cur_state); + + return 0; +} +EXPORT_SYMBOL(dib8096p_tuner_sleep); + static const s32 lut_1000ln_mant[] = { 908, 7003, 7090, 7170, 7244, 7313, 7377, 7438, 7495, 7549, 7600 @@ -1051,6 +1815,26 @@ s32 dib8000_get_adc_power(struct dvb_frontend *fe, u8 mode) } EXPORT_SYMBOL(dib8000_get_adc_power); +int dib8090p_get_dc_power(struct dvb_frontend *fe, u8 IQ) +{ + struct dib8000_state *state = fe->demodulator_priv; + int val = 0; + + switch (IQ) { + case 1: + val = dib8000_read_word(state, 403); + break; + case 0: + val = dib8000_read_word(state, 404); + break; + } + if (val & 0x200) + val -= 1024; + + return val; +} +EXPORT_SYMBOL(dib8090p_get_dc_power); + static void dib8000_update_timf(struct dib8000_state *state) { u32 timf = state->timf = dib8000_read32(state, 435); @@ -1060,6 +1844,26 @@ static void dib8000_update_timf(struct dib8000_state *state) dprintk("Updated timing frequency: %d (default: %d)", state->timf, state->timf_default); } +u32 dib8000_ctrl_timf(struct dvb_frontend *fe, uint8_t op, uint32_t timf) +{ + struct dib8000_state *state = fe->demodulator_priv; + + switch (op) { + case DEMOD_TIMF_SET: + state->timf = timf; + break; + case DEMOD_TIMF_UPDATE: + dib8000_update_timf(state); + break; + case DEMOD_TIMF_GET: + break; + } + dib8000_set_bandwidth(state->fe[0], 6000); + + return state->timf; +} +EXPORT_SYMBOL(dib8000_ctrl_timf); + static const u16 adc_target_16dB[11] = { (1 << 13) - 825 - 117, (1 << 13) - 837 - 117, @@ -1086,6 +1890,9 @@ static void dib8000_set_channel(struct dib8000_state *state, u8 seq, u8 autosear u16 init_prbs = 0xfff; u16 ana_gain = 0; + if (state->revision == 0x8090) + dib8000_init_sdram(state); + if (state->ber_monitored_layer != LAYER_ALL) dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & 0x60) | state->ber_monitored_layer); else @@ -1418,7 +2225,10 @@ static void dib8000_set_channel(struct dib8000_state *state, u8 seq, u8 autosear dprintk("nbseg_diff = %X (%d)", seg_diff_mask, seg_diff_mask); state->differential_constellation = (seg_diff_mask != 0); - dib8000_set_diversity_in(state->fe[0], state->diversity_onoff); + if (state->revision != 0x8090) + dib8000_set_diversity_in(state->fe[0], state->diversity_onoff); + else + dib8096p_set_diversity_in(state->fe[0], state->diversity_onoff); if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) { if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 1) @@ -1870,7 +2680,7 @@ static int dib8000_tune(struct dvb_frontend *fe) { struct dib8000_state *state = fe->demodulator_priv; int ret = 0; - u16 value, mode = fft_to_mode(state); + u16 lock, value, mode = fft_to_mode(state); // we are already tuned - just resuming from suspend if (state == NULL) @@ -1924,7 +2734,11 @@ static int dib8000_tune(struct dvb_frontend *fe) } // we achieved a coff_cpil_lock - it's time to update the timf - if ((dib8000_read_word(state, 568) >> 11) & 0x1) + if (state->revision != 0x8090) + lock = dib8000_read_word(state, 568); + else + lock = dib8000_read_word(state, 570); + if ((lock >> 11) & 0x1) dib8000_update_timf(state); //now that tune is finished, lock0 should lock on fec_mpeg to output this lock on MP_LOCK. It's changed in autosearch start @@ -1946,11 +2760,14 @@ static int dib8000_wakeup(struct dvb_frontend *fe) u8 index_frontend; int ret; - dib8000_set_power_mode(state, DIB8000M_POWER_ALL); + dib8000_set_power_mode(state, DIB8000_POWER_ALL); dib8000_set_adc_state(state, DIBX000_ADC_ON); if (dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0) dprintk("could not start Slow ADC"); + if (state->revision != 0x8090) + dib8000_sad_calib(state); + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { ret = state->fe[index_frontend]->ops.init(state->fe[index_frontend]); if (ret < 0) @@ -1972,8 +2789,9 @@ static int dib8000_sleep(struct dvb_frontend *fe) return ret; } - dib8000_set_output_mode(fe, OUTMODE_HIGH_Z); - dib8000_set_power_mode(state, DIB8000M_POWER_INTERFACE_ONLY); + if (state->revision != 0x8090) + dib8000_set_output_mode(fe, OUTMODE_HIGH_Z); + dib8000_set_power_mode(state, DIB8000_POWER_INTERFACE_ONLY); return dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF) | dib8000_set_adc_state(state, DIBX000_ADC_OFF); } @@ -2028,7 +2846,10 @@ static int dib8000_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_par fe->dtv_property_cache.isdbt_sb_mode = dib8000_read_word(state, 508) & 0x1; - val = dib8000_read_word(state, 570); + if (state->revision == 0x8090) + val = dib8000_read_word(state, 572); + else + val = dib8000_read_word(state, 570); fe->dtv_property_cache.inversion = (val & 0x40) >> 6; switch ((val & 0x30) >> 4) { case 1: @@ -2158,7 +2979,12 @@ static int dib8000_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_par state->fe[index_frontend]->dtv_property_cache.delivery_system = SYS_ISDBT; memcpy(&state->fe[index_frontend]->dtv_property_cache, &fe->dtv_property_cache, sizeof(struct dtv_frontend_properties)); - dib8000_set_output_mode(state->fe[index_frontend], OUTMODE_HIGH_Z); + if (state->revision != 0x8090) + dib8000_set_output_mode(state->fe[index_frontend], + OUTMODE_HIGH_Z); + else + dib8096p_set_output_mode(state->fe[index_frontend], + OUTMODE_HIGH_Z); if (state->fe[index_frontend]->ops.tuner_ops.set_params) state->fe[index_frontend]->ops.tuner_ops.set_params(state->fe[index_frontend], fep); @@ -2269,14 +3095,37 @@ static int dib8000_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_par ret = dib8000_tune(state->fe[index_frontend]); /* set output mode and diversity input */ - dib8000_set_output_mode(state->fe[0], state->cfg.output_mode); - for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { - dib8000_set_output_mode(state->fe[index_frontend], OUTMODE_DIVERSITY); - dib8000_set_diversity_in(state->fe[index_frontend-1], 1); - } + if (state->revision != 0x8090) { + dib8000_set_output_mode(state->fe[0], state->cfg.output_mode); + for (index_frontend = 1; + (index_frontend < MAX_NUMBER_OF_FRONTENDS) && + (state->fe[index_frontend] != NULL); + index_frontend++) { + dib8000_set_output_mode(state->fe[index_frontend], + OUTMODE_DIVERSITY); + dib8000_set_diversity_in(state->fe[index_frontend-1], 1); + } - /* turn off the diversity of the last chip */ - dib8000_set_diversity_in(state->fe[index_frontend-1], 0); + /* turn off the diversity of the last chip */ + dib8000_set_diversity_in(state->fe[index_frontend-1], 0); + } else { + dib8096p_set_output_mode(state->fe[0], state->cfg.output_mode); + if (state->cfg.enMpegOutput == 0) { + dib8096p_setDibTxMux(state, MPEG_ON_DIBTX); + dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS); + } + for (index_frontend = 1; + (index_frontend < MAX_NUMBER_OF_FRONTENDS) && + (state->fe[index_frontend] != NULL); + index_frontend++) { + dib8096p_set_output_mode(state->fe[index_frontend], + OUTMODE_DIVERSITY); + dib8096p_set_diversity_in(state->fe[index_frontend-1], 1); + } + + /* turn off the diversity of the last chip */ + dib8096p_set_diversity_in(state->fe[index_frontend-1], 0); + } return ret; } @@ -2285,15 +3134,22 @@ static u16 dib8000_read_lock(struct dvb_frontend *fe) { struct dib8000_state *state = fe->demodulator_priv; + if (state->revision == 0x8090) + return dib8000_read_word(state, 570); return dib8000_read_word(state, 568); } static int dib8000_read_status(struct dvb_frontend *fe, fe_status_t * stat) { struct dib8000_state *state = fe->demodulator_priv; - u16 lock_slave = 0, lock = dib8000_read_word(state, 568); + u16 lock_slave = 0, lock; u8 index_frontend; + if (state->revision == 0x8090) + lock = dib8000_read_word(state, 570); + else + lock = dib8000_read_word(state, 568); + for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) lock_slave |= dib8000_read_lock(state->fe[index_frontend]); @@ -2331,14 +3187,26 @@ static int dib8000_read_status(struct dvb_frontend *fe, fe_status_t * stat) static int dib8000_read_ber(struct dvb_frontend *fe, u32 * ber) { struct dib8000_state *state = fe->demodulator_priv; - *ber = (dib8000_read_word(state, 560) << 16) | dib8000_read_word(state, 561); // 13 segments + + /* 13 segments */ + if (state->revision == 0x8090) + *ber = (dib8000_read_word(state, 562) << 16) | + dib8000_read_word(state, 563); + else + *ber = (dib8000_read_word(state, 560) << 16) | + dib8000_read_word(state, 561); return 0; } static int dib8000_read_unc_blocks(struct dvb_frontend *fe, u32 * unc) { struct dib8000_state *state = fe->demodulator_priv; - *unc = dib8000_read_word(state, 565); // packet error on 13 seg + + /* packet error on 13 seg */ + if (state->revision == 0x8090) + *unc = dib8000_read_word(state, 567); + else + *unc = dib8000_read_word(state, 565); return 0; } @@ -2371,14 +3239,20 @@ static u32 dib8000_get_snr(struct dvb_frontend *fe) u32 n, s, exp; u16 val; - val = dib8000_read_word(state, 542); + if (state->revision != 0x8090) + val = dib8000_read_word(state, 542); + else + val = dib8000_read_word(state, 544); n = (val >> 6) & 0xff; exp = (val & 0x3f); if ((exp & 0x20) != 0) exp -= 0x40; n <<= exp+16; - val = dib8000_read_word(state, 543); + if (state->revision != 0x8090) + val = dib8000_read_word(state, 543); + else + val = dib8000_read_word(state, 545); s = (val >> 6) & 0xff; exp = (val & 0x3f); if ((exp & 0x20) != 0) @@ -2459,7 +3333,8 @@ struct dvb_frontend *dib8000_get_slave_frontend(struct dvb_frontend *fe, int sla EXPORT_SYMBOL(dib8000_get_slave_frontend); -int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr) +int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, + u8 default_addr, u8 first_addr, u8 is_dib8096p) { int k = 0, ret = 0; u8 new_addr = 0; @@ -2489,9 +3364,12 @@ int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 defau new_addr = first_addr + (k << 1); client.addr = new_addr; - dib8000_i2c_write16(&client, 1287, 0x0003); /* sram lead in, rdy */ - if (dib8000_identify(&client) == 0) { + if (!is_dib8096p) dib8000_i2c_write16(&client, 1287, 0x0003); /* sram lead in, rdy */ + if (dib8000_identify(&client) == 0) { + /* sram lead in, rdy */ + if (!is_dib8096p) + dib8000_i2c_write16(&client, 1287, 0x0003); client.addr = default_addr; if (dib8000_identify(&client) == 0) { dprintk("#%d: not identified", k); @@ -2550,6 +3428,7 @@ static void dib8000_release(struct dvb_frontend *fe) dvb_frontend_detach(st->fe[index_frontend]); dibx000_exit_i2c_master(&st->i2c_master); + i2c_del_adapter(&st->dib8096p_tuner_adap); kfree(st->fe[0]); kfree(st); } @@ -2652,6 +3531,15 @@ struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, s dibx000_init_i2c_master(&state->i2c_master, DIB8000, state->i2c.adap, state->i2c.addr); + /* init 8096p tuner adapter */ + strncpy(state->dib8096p_tuner_adap.name, "DiB8096P tuner interface", + sizeof(state->dib8096p_tuner_adap.name)); + state->dib8096p_tuner_adap.algo = &dib8096p_tuner_xfer_algo; + state->dib8096p_tuner_adap.algo_data = NULL; + state->dib8096p_tuner_adap.dev.parent = state->i2c.adap->dev.parent; + i2c_set_adapdata(&state->dib8096p_tuner_adap, state); + i2c_add_adapter(&state->dib8096p_tuner_adap); + dib8000_reset(fe); dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & ~0x60) | (3 << 5)); /* ber_rs_len = 3 */ diff --git a/drivers/media/dvb/frontends/dib8000.h b/drivers/media/dvb/frontends/dib8000.h index 617f9eba3a09..39591bb172c1 100644 --- a/drivers/media/dvb/frontends/dib8000.h +++ b/drivers/media/dvb/frontends/dib8000.h @@ -32,6 +32,7 @@ struct dib8000_config { u8 div_cfg; u8 output_mode; u8 refclksel; + u8 enMpegOutput:1; }; #define DEFAULT_DIB8000_I2C_ADDRESS 18 @@ -40,7 +41,8 @@ struct dib8000_config { extern struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg); extern struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int); -extern int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr); +extern int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, + u8 default_addr, u8 first_addr, u8 is_dib8096p); extern int dib8000_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val); extern int dib8000_set_wbd_ref(struct dvb_frontend *, u16 value); @@ -50,6 +52,13 @@ extern int dib8000_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_st extern enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend *fe); extern void dib8000_pwm_agc_reset(struct dvb_frontend *fe); extern s32 dib8000_get_adc_power(struct dvb_frontend *fe, u8 mode); +extern struct i2c_adapter *dib8096p_get_i2c_tuner(struct dvb_frontend *fe); +extern int dib8096p_tuner_sleep(struct dvb_frontend *fe, int onoff); +extern int dib8090p_get_dc_power(struct dvb_frontend *fe, u8 IQ); +extern u32 dib8000_ctrl_timf(struct dvb_frontend *fe, + uint8_t op, uint32_t timf); +extern int dib8000_update_pll(struct dvb_frontend *fe, + struct dibx000_bandwidth_config *pll); extern int dib8000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave); extern int dib8000_remove_slave_frontend(struct dvb_frontend *fe); extern struct dvb_frontend *dib8000_get_slave_frontend(struct dvb_frontend *fe, int slave_index); @@ -66,7 +75,9 @@ static inline struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *fe return NULL; } -static inline int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr) +static inline int dib8000_i2c_enumeration(struct i2c_adapter *host, + int no_of_demods, u8 default_addr, u8 first_addr, + u8 is_dib8096p) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return -ENODEV; @@ -109,11 +120,38 @@ static inline void dib8000_pwm_agc_reset(struct dvb_frontend *fe) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); } +static inline struct i2c_adapter *dib8096p_get_i2c_tuner(struct dvb_frontend *fe) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +static inline int dib8096p_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} static inline s32 dib8000_get_adc_power(struct dvb_frontend *fe, u8 mode) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return 0; } +static inline int dib8090p_get_dc_power(struct dvb_frontend *fe, u8 IQ) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} +static inline u32 dib8000_ctrl_timf(struct dvb_frontend *fe, + uint8_t op, uint32_t timf) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} +static inline int dib8000_update_pll(struct dvb_frontend *fe, + struct dibx000_bandwidth_config *pll) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} static inline int dib8000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); diff --git a/drivers/media/dvb/frontends/dibx000_common.h b/drivers/media/dvb/frontends/dibx000_common.h index 5e011474be43..02e6431e7355 100644 --- a/drivers/media/dvb/frontends/dibx000_common.h +++ b/drivers/media/dvb/frontends/dibx000_common.h @@ -276,4 +276,11 @@ struct dibSubbandSelection { #define DEMOD_TIMF_GET 0x01 #define DEMOD_TIMF_UPDATE 0x02 +#define MPEG_ON_DIBTX 1 +#define DIV_ON_DIBTX 2 +#define ADC_ON_DIBTX 3 +#define DEMOUT_ON_HOSTBUS 4 +#define DIBTX_ON_HOSTBUS 5 +#define MPEG_ON_HOSTBUS 6 + #endif |