diff options
| -rw-r--r-- | drivers/net/s2io-regs.h | 2 | ||||
| -rw-r--r-- | drivers/net/s2io.c | 93 | ||||
| -rw-r--r-- | drivers/net/s2io.h | 6 |
3 files changed, 98 insertions, 3 deletions
diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h index cfa267914476..83e3e47a9e3d 100644 --- a/drivers/net/s2io-regs.h +++ b/drivers/net/s2io-regs.h @@ -220,7 +220,7 @@ struct XENA_dev_config { u64 scheduled_int_ctrl; #define SCHED_INT_CTRL_TIMER_EN BIT(0) #define SCHED_INT_CTRL_ONE_SHOT BIT(1) -#define SCHED_INT_CTRL_INT2MSI TBD +#define SCHED_INT_CTRL_INT2MSI(val) vBIT(val,10,6) #define SCHED_INT_PERIOD TBD u64 txreqtimeout; diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index dd012322cdbe..588938204e20 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -37,7 +37,7 @@ * tx_fifo_len: This too is an array of 8. Each element defines the number of * Tx descriptors that can be associated with each corresponding FIFO. * intr_type: This defines the type of interrupt. The values can be 0(INTA), - * 2(MSI_X). Default value is '0(INTA)' + * 2(MSI_X). Default value is '2(MSI_X)' * lro: Specifies whether to enable Large Receive Offload (LRO) or not. * Possible values '1' for enable '0' for disable. Default is '0' * lro_max_pkts: This parameter defines maximum number of packets can be @@ -428,7 +428,7 @@ S2IO_PARM_INT(l3l4hdr_size, 128); /* Frequency of Rx desc syncs expressed as power of 2 */ S2IO_PARM_INT(rxsync_frequency, 3); /* Interrupt type. Values can be 0(INTA), 2(MSI_X) */ -S2IO_PARM_INT(intr_type, 0); +S2IO_PARM_INT(intr_type, 2); /* Large receive offload feature */ S2IO_PARM_INT(lro, 0); /* Max pkts to be aggregated by LRO at one time. If not specified, @@ -3773,6 +3773,59 @@ static int s2io_enable_msi_x(struct s2io_nic *nic) return 0; } +/* Handle software interrupt used during MSI(X) test */ +static irqreturn_t __devinit s2io_test_intr(int irq, void *dev_id) +{ + struct s2io_nic *sp = dev_id; + + sp->msi_detected = 1; + wake_up(&sp->msi_wait); + + return IRQ_HANDLED; +} + +/* Test interrupt path by forcing a a software IRQ */ +static int __devinit s2io_test_msi(struct s2io_nic *sp) +{ + struct pci_dev *pdev = sp->pdev; + struct XENA_dev_config __iomem *bar0 = sp->bar0; + int err; + u64 val64, saved64; + + err = request_irq(sp->entries[1].vector, s2io_test_intr, 0, + sp->name, sp); + if (err) { + DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n", + sp->dev->name, pci_name(pdev), pdev->irq); + return err; + } + + init_waitqueue_head (&sp->msi_wait); + sp->msi_detected = 0; + + saved64 = val64 = readq(&bar0->scheduled_int_ctrl); + val64 |= SCHED_INT_CTRL_ONE_SHOT; + val64 |= SCHED_INT_CTRL_TIMER_EN; + val64 |= SCHED_INT_CTRL_INT2MSI(1); + writeq(val64, &bar0->scheduled_int_ctrl); + + wait_event_timeout(sp->msi_wait, sp->msi_detected, HZ/10); + + if (!sp->msi_detected) { + /* MSI(X) test failed, go back to INTx mode */ + DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated" + "using MSI(X) during test\n", sp->dev->name, + pci_name(pdev)); + + err = -EOPNOTSUPP; + } + + free_irq(sp->entries[1].vector, sp); + + writeq(saved64, &bar0->scheduled_int_ctrl); + + return err; +} /* ********************************************************* * * Functions defined below concern the OS part of the driver * * ********************************************************* */ @@ -3803,6 +3856,42 @@ static int s2io_open(struct net_device *dev) napi_enable(&sp->napi); + if (sp->intr_type == MSI_X) { + int ret = s2io_enable_msi_x(sp); + + if (!ret) { + u16 msi_control; + + ret = s2io_test_msi(sp); + + /* rollback MSI-X, will re-enable during add_isr() */ + kfree(sp->entries); + sp->mac_control.stats_info->sw_stat.mem_freed += + (MAX_REQUESTED_MSI_X * + sizeof(struct msix_entry)); + kfree(sp->s2io_entries); + sp->mac_control.stats_info->sw_stat.mem_freed += + (MAX_REQUESTED_MSI_X * + sizeof(struct s2io_msix_entry)); + sp->entries = NULL; + sp->s2io_entries = NULL; + + pci_read_config_word(sp->pdev, 0x42, &msi_control); + msi_control &= 0xFFFE; /* Disable MSI */ + pci_write_config_word(sp->pdev, 0x42, msi_control); + + pci_disable_msix(sp->pdev); + + } + if (ret) { + + DBG_PRINT(ERR_DBG, + "%s: MSI-X requested but failed to enable\n", + dev->name); + sp->intr_type = INTA; + } + } + /* Initialize H/W and enable interrupts */ err = s2io_card_up(sp); if (err) { diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 420fefb99188..62398fab2e96 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -412,6 +412,10 @@ struct config_param { struct tx_fifo_config tx_cfg[MAX_TX_FIFOS]; /*Per-Tx FIFO config */ u32 max_txds; /*Max no. of Tx buffer descriptor per TxDL */ u64 tx_intr_type; +#define INTA 0 +#define MSI_X 2 + u8 intr_type; + /* Specifies if Tx Intr is UTILZ or PER_LIST type. */ /* Rx Side */ @@ -862,6 +866,8 @@ struct s2io_nic { struct vlan_group *vlgrp; #define MSIX_FLG 0xA5 struct msix_entry *entries; + int msi_detected; + wait_queue_head_t msi_wait; struct s2io_msix_entry *s2io_entries; char desc[MAX_REQUESTED_MSI_X][25]; |