summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/scsi/isci/Makefile1
-rw-r--r--drivers/scsi/isci/core/sci_util.c1
-rw-r--r--drivers/scsi/isci/core/scic_config_parameters.h38
-rw-r--r--drivers/scsi/isci/core/scic_controller.h130
-rw-r--r--drivers/scsi/isci/core/scic_sds_controller.c2973
-rw-r--r--drivers/scsi/isci/core/scic_sds_controller.h576
-rw-r--r--drivers/scsi/isci/core/scic_sds_phy.c3
-rw-r--r--drivers/scsi/isci/core/scic_sds_port.c4
-rw-r--r--drivers/scsi/isci/core/scic_sds_port.h1
-rw-r--r--drivers/scsi/isci/core/scic_sds_port_configuration_agent.c4
-rw-r--r--drivers/scsi/isci/core/scic_sds_request.c3
-rw-r--r--drivers/scsi/isci/core/scic_sds_smp_request.c4
-rw-r--r--drivers/scsi/isci/core/scic_sds_ssp_request.c4
-rw-r--r--drivers/scsi/isci/core/scic_sds_stp_request.c2
-rw-r--r--drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c11
-rw-r--r--drivers/scsi/isci/host.c2785
-rw-r--r--drivers/scsi/isci/host.h612
-rw-r--r--drivers/scsi/isci/init.c2
-rw-r--r--drivers/scsi/isci/isci.h6
-rw-r--r--drivers/scsi/isci/pool.h (renamed from drivers/scsi/isci/core/sci_pool.h)0
-rw-r--r--drivers/scsi/isci/port.c8
-rw-r--r--drivers/scsi/isci/probe_roms.c1
-rw-r--r--drivers/scsi/isci/remote_device.c3
-rw-r--r--drivers/scsi/isci/remote_node_context.c3
-rw-r--r--drivers/scsi/isci/remote_node_table.c1
-rw-r--r--drivers/scsi/isci/request.c1
-rw-r--r--drivers/scsi/isci/sci_environment.h122
-rw-r--r--drivers/scsi/isci/task.c1
28 files changed, 3360 insertions, 3940 deletions
diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile
index 78ba0fc3548a..45f8f68caf4a 100644
--- a/drivers/scsi/isci/Makefile
+++ b/drivers/scsi/isci/Makefile
@@ -5,7 +5,6 @@ isci-objs := init.o phy.o request.o sata.o \
host.o task.o probe_roms.o \
remote_node_context.o \
remote_node_table.o \
- core/scic_sds_controller.o \
core/scic_sds_request.o \
core/scic_sds_stp_request.o \
core/scic_sds_port.o \
diff --git a/drivers/scsi/isci/core/sci_util.c b/drivers/scsi/isci/core/sci_util.c
index 0101fec23865..595d8da1abba 100644
--- a/drivers/scsi/isci/core/sci_util.c
+++ b/drivers/scsi/isci/core/sci_util.c
@@ -55,7 +55,6 @@
#include <linux/kernel.h>
#include "sci_util.h"
-#include "sci_environment.h"
#include "request.h"
void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, dma_addr_t phys_addr)
diff --git a/drivers/scsi/isci/core/scic_config_parameters.h b/drivers/scsi/isci/core/scic_config_parameters.h
index 8b8c9259f52f..15e7744dbdcf 100644
--- a/drivers/scsi/isci/core/scic_config_parameters.h
+++ b/drivers/scsi/isci/core/scic_config_parameters.h
@@ -229,44 +229,6 @@ union scic_oem_parameters {
struct scic_sds_oem_params sds1;
};
-/**
- * scic_user_parameters_set() - This method allows the user to attempt to
- * change the user parameters utilized by the controller.
- * @controller: This parameter specifies the controller on which to set the
- * user parameters.
- * @user_parameters: This parameter specifies the USER_PARAMETERS object
- * containing the potential new values.
- *
- * Indicate if the update of the user parameters was successful. SCI_SUCCESS
- * This value is returned if the operation succeeded. SCI_FAILURE_INVALID_STATE
- * This value is returned if the attempt to change the user parameter failed,
- * because changing one of the parameters is not currently allowed.
- * SCI_FAILURE_INVALID_PARAMETER_VALUE This value is returned if the user
- * supplied an invalid interrupt coalescence time, spin up delay interval, etc.
- */
-enum sci_status scic_user_parameters_set(
- struct scic_sds_controller *controller,
- union scic_user_parameters *user_parameters);
-
-/**
- * scic_oem_parameters_set() - This method allows the user to attempt to change
- * the OEM parameters utilized by the controller.
- * @controller: This parameter specifies the controller on which to set the
- * user parameters.
- * @oem_parameters: This parameter specifies the OEM parameters object
- * containing the potential new values.
- *
- * Indicate if the update of the user parameters was successful. SCI_SUCCESS
- * This value is returned if the operation succeeded. SCI_FAILURE_INVALID_STATE
- * This value is returned if the attempt to change the user parameter failed,
- * because changing one of the parameters is not currently allowed.
- * SCI_FAILURE_INVALID_PARAMETER_VALUE This value is returned if the user
- * supplied an unsupported value for one of the OEM parameters.
- */
-enum sci_status scic_oem_parameters_set(
- struct scic_sds_controller *controller,
- union scic_oem_parameters *oem_parameters);
-
int scic_oem_parameters_validate(struct scic_sds_oem_params *oem);
/**
diff --git a/drivers/scsi/isci/core/scic_controller.h b/drivers/scsi/isci/core/scic_controller.h
deleted file mode 100644
index bd08f306ed67..000000000000
--- a/drivers/scsi/isci/core/scic_controller.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _SCIC_CONTROLLER_H_
-#define _SCIC_CONTROLLER_H_
-
-#include "scic_config_parameters.h"
-
-struct scic_sds_request;
-struct scic_sds_phy;
-struct scic_sds_port;
-struct scic_sds_remote_device;
-
-enum sci_status scic_controller_construct(struct scic_sds_controller *c,
- void __iomem *scu_base,
- void __iomem *smu_base);
-
-void scic_controller_enable_interrupts(
- struct scic_sds_controller *controller);
-
-void scic_controller_disable_interrupts(
- struct scic_sds_controller *controller);
-
-enum sci_status scic_controller_initialize(
- struct scic_sds_controller *controller);
-
-u32 scic_controller_get_suggested_start_timeout(
- struct scic_sds_controller *controller);
-
-enum sci_status scic_controller_start(
- struct scic_sds_controller *controller,
- u32 timeout);
-
-enum sci_status scic_controller_stop(
- struct scic_sds_controller *controller,
- u32 timeout);
-
-enum sci_status scic_controller_reset(
- struct scic_sds_controller *controller);
-
-enum sci_status scic_controller_start_io(
- struct scic_sds_controller *controller,
- struct scic_sds_remote_device *remote_device,
- struct scic_sds_request *io_request,
- u16 io_tag);
-
-enum sci_task_status scic_controller_start_task(
- struct scic_sds_controller *controller,
- struct scic_sds_remote_device *remote_device,
- struct scic_sds_request *task_request,
- u16 io_tag);
-
-enum sci_status scic_controller_terminate_request(
- struct scic_sds_controller *controller,
- struct scic_sds_remote_device *remote_device,
- struct scic_sds_request *request);
-
-enum sci_status scic_controller_complete_io(
- struct scic_sds_controller *controller,
- struct scic_sds_remote_device *remote_device,
- struct scic_sds_request *io_request);
-
-enum sci_status scic_controller_get_phy_handle(
- struct scic_sds_controller *controller,
- u8 phy_index,
- struct scic_sds_phy **phy_handle);
-
-u16 scic_controller_allocate_io_tag(
- struct scic_sds_controller *controller);
-
-enum sci_status scic_controller_free_io_tag(
- struct scic_sds_controller *controller,
- u16 io_tag);
-
-struct device;
-struct scic_sds_controller *scic_controller_alloc(struct device *dev);
-int scic_controller_mem_init(struct scic_sds_controller *scic);
-#endif /* _SCIC_CONTROLLER_H_ */
diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c
deleted file mode 100644
index e77265b9b9ec..000000000000
--- a/drivers/scsi/isci/core/scic_sds_controller.c
+++ /dev/null
@@ -1,2973 +0,0 @@
-/*
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <linux/device.h>
-#include <scsi/sas.h>
-#include "scic_controller.h"
-#include "scic_phy.h"
-#include "scic_port.h"
-#include "scic_sds_controller.h"
-#include "scu_registers.h"
-#include "scic_sds_phy.h"
-#include "scic_sds_port_configuration_agent.h"
-#include "scic_sds_port.h"
-#include "remote_device.h"
-#include "scic_sds_request.h"
-#include "sci_environment.h"
-#include "sci_util.h"
-#include "scu_completion_codes.h"
-#include "scu_event_codes.h"
-#include "scu_remote_node_context.h"
-#include "scu_task_context.h"
-#include "scu_unsolicited_frame.h"
-#include "timers.h"
-
-#define SCU_CONTEXT_RAM_INIT_STALL_TIME 200
-
-/**
- * smu_dcc_get_max_ports() -
- *
- * This macro returns the maximum number of logical ports supported by the
- * hardware. The caller passes in the value read from the device context
- * capacity register and this macro will mash and shift the value appropriately.
- */
-#define smu_dcc_get_max_ports(dcc_value) \
- (\
- (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \
- >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT) + 1 \
- )
-
-/**
- * smu_dcc_get_max_task_context() -
- *
- * This macro returns the maximum number of task contexts supported by the
- * hardware. The caller passes in the value read from the device context
- * capacity register and this macro will mash and shift the value appropriately.
- */
-#define smu_dcc_get_max_task_context(dcc_value) \
- (\
- (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \
- >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT) + 1 \
- )
-
-/**
- * smu_dcc_get_max_remote_node_context() -
- *
- * This macro returns the maximum number of remote node contexts supported by
- * the hardware. The caller passes in the value read from the device context
- * capacity register and this macro will mash and shift the value appropriately.
- */
-#define smu_dcc_get_max_remote_node_context(dcc_value) \
- (\
- (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \
- >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT) + 1 \
- )
-
-
-static void scic_sds_controller_power_control_timer_handler(
- void *controller);
-#define SCIC_SDS_CONTROLLER_MIN_TIMER_COUNT 3
-#define SCIC_SDS_CONTROLLER_MAX_TIMER_COUNT 3
-
-/**
- *
- *
- * The number of milliseconds to wait for a phy to start.
- */
-#define SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT 100
-
-/**
- *
- *
- * The number of milliseconds to wait while a given phy is consuming power
- * before allowing another set of phys to consume power. Ultimately, this will
- * be specified by OEM parameter.
- */
-#define SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL 500
-
-/**
- * COMPLETION_QUEUE_CYCLE_BIT() -
- *
- * This macro will return the cycle bit of the completion queue entry
- */
-#define COMPLETION_QUEUE_CYCLE_BIT(x) ((x) & 0x80000000)
-
-/**
- * NORMALIZE_GET_POINTER() -
- *
- * This macro will normalize the completion queue get pointer so its value can
- * be used as an index into an array
- */
-#define NORMALIZE_GET_POINTER(x) \
- ((x) & SMU_COMPLETION_QUEUE_GET_POINTER_MASK)
-
-/**
- * NORMALIZE_PUT_POINTER() -
- *
- * This macro will normalize the completion queue put pointer so its value can
- * be used as an array inde
- */
-#define NORMALIZE_PUT_POINTER(x) \
- ((x) & SMU_COMPLETION_QUEUE_PUT_POINTER_MASK)
-
-
-/**
- * NORMALIZE_GET_POINTER_CYCLE_BIT() -
- *
- * This macro will normalize the completion queue cycle pointer so it matches
- * the completion queue cycle bit
- */
-#define NORMALIZE_GET_POINTER_CYCLE_BIT(x) \
- ((SMU_CQGR_CYCLE_BIT & (x)) << (31 - SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT))
-
-/**
- * NORMALIZE_EVENT_POINTER() -
- *
- * This macro will normalize the completion queue event entry so its value can
- * be used as an index.
- */
-#define NORMALIZE_EVENT_POINTER(x) \
- (\
- ((x) & SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK) \
- >> SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT \
- )
-
-/**
- * INCREMENT_COMPLETION_QUEUE_GET() -
- *
- * This macro will increment the controllers completion queue index value and
- * possibly toggle the cycle bit if the completion queue index wraps back to 0.
- */
-#define INCREMENT_COMPLETION_QUEUE_GET(controller, index, cycle) \
- INCREMENT_QUEUE_GET(\
- (index), \
- (cycle), \
- (controller)->completion_queue_entries, \
- SMU_CQGR_CYCLE_BIT \
- )
-
-/**
- * INCREMENT_EVENT_QUEUE_GET() -
- *
- * This macro will increment the controllers event queue index value and
- * possibly toggle the event cycle bit if the event queue index wraps back to 0.
- */
-#define INCREMENT_EVENT_QUEUE_GET(controller, index, cycle) \
- INCREMENT_QUEUE_GET(\
- (index), \
- (cycle), \
- (controller)->completion_event_entries, \
- SMU_CQGR_EVENT_CYCLE_BIT \
- )
-
-static void scic_sds_controller_initialize_power_control(struct scic_sds_controller *scic)
-{
- struct isci_host *ihost = scic_to_ihost(scic);
- scic->power_control.timer = isci_timer_create(ihost,
- scic,
- scic_sds_controller_power_control_timer_handler);
-
- memset(scic->power_control.requesters, 0,
- sizeof(scic->power_control.requesters));
-
- scic->power_control.phys_waiting = 0;
- scic->power_control.phys_granted_power = 0;
-}
-
-int scic_controller_mem_init(struct scic_sds_controller *scic)
-{
- struct device *dev = scic_to_dev(scic);
- dma_addr_t dma_handle;
- enum sci_status result;
-
- scic->completion_queue = dmam_alloc_coherent(dev,
- scic->completion_queue_entries * sizeof(u32),
- &dma_handle, GFP_KERNEL);
- if (!scic->completion_queue)
- return -ENOMEM;
-
- writel(lower_32_bits(dma_handle),
- &scic->smu_registers->completion_queue_lower);
- writel(upper_32_bits(dma_handle),
- &scic->smu_registers->completion_queue_upper);
-
- scic->remote_node_context_table = dmam_alloc_coherent(dev,
- scic->remote_node_entries *
- sizeof(union scu_remote_node_context),
- &dma_handle, GFP_KERNEL);
- if (!scic->remote_node_context_table)
- return -ENOMEM;
-
- writel(lower_32_bits(dma_handle),
- &scic->smu_registers->remote_node_context_lower);
- writel(upper_32_bits(dma_handle),
- &scic->smu_registers->remote_node_context_upper);
-
- scic->task_context_table = dmam_alloc_coherent(dev,
- scic->task_context_entries *
- sizeof(struct scu_task_context),
- &dma_handle, GFP_KERNEL);
- if (!scic->task_context_table)
- return -ENOMEM;
-
- writel(lower_32_bits(dma_handle),
- &scic->smu_registers->host_task_table_lower);
- writel(upper_32_bits(dma_handle),
- &scic->smu_registers->host_task_table_upper);
-
- result = scic_sds_unsolicited_frame_control_construct(scic);
- if (result)
- return result;
-
- /*
- * Inform the silicon as to the location of the UF headers and
- * address table.
- */
- writel(lower_32_bits(scic->uf_control.headers.physical_address),
- &scic->scu_registers->sdma.uf_header_base_address_lower);
- writel(upper_32_bits(scic->uf_control.headers.physical_address),
- &scic->scu_registers->sdma.uf_header_base_address_upper);
-
- writel(lower_32_bits(scic->uf_control.address_table.physical_address),
- &scic->scu_registers->sdma.uf_address_table_lower);
- writel(upper_32_bits(scic->uf_control.address_table.physical_address),
- &scic->scu_registers->sdma.uf_address_table_upper);
-
- return 0;
-}
-
-/**
- * This method initializes the task context data for the controller.
- * @scic:
- *
- */
-static void
-scic_sds_controller_assign_task_entries(struct scic_sds_controller *controller)
-{
- u32 task_assignment;
-
- /*
- * Assign all the TCs to function 0
- * TODO: Do we actually need to read this register to write it back?
- */
-
- task_assignment =
- readl(&controller->smu_registers->task_context_assignment[0]);
-
- task_assignment |= (SMU_TCA_GEN_VAL(STARTING, 0)) |
- (SMU_TCA_GEN_VAL(ENDING, controller->task_context_entries - 1)) |
- (SMU_TCA_GEN_BIT(RANGE_CHECK_ENABLE));
-
- writel(task_assignment,
- &controller->smu_registers->task_context_assignment[0]);
-
-}
-
-/**
- * This method initializes the hardware completion queue.
- *
- *
- */
-static void scic_sds_controller_initialize_completion_queue(
- struct scic_sds_controller *scic)
-{
- u32 index;
- u32 completion_queue_control_value;
- u32 completion_queue_get_value;
- u32 completion_queue_put_value;
-
- scic->completion_queue_get = 0;
-
- completion_queue_control_value = (
- SMU_CQC_QUEUE_LIMIT_SET(scic->completion_queue_entries - 1)
- | SMU_CQC_EVENT_LIMIT_SET(scic->completion_event_entries - 1)
- );
-
- writel(completion_queue_control_value,
- &scic->smu_registers->completion_queue_control);
-
-
- /* Set the completion queue get pointer and enable the queue */
- completion_queue_get_value = (
- (SMU_CQGR_GEN_VAL(POINTER, 0))
- | (SMU_CQGR_GEN_VAL(EVENT_POINTER, 0))
- | (SMU_CQGR_GEN_BIT(ENABLE))
- | (SMU_CQGR_GEN_BIT(EVENT_ENABLE))
- );
-
- writel(completion_queue_get_value,
- &scic->smu_registers->completion_queue_get);
-
- /* Set the completion queue put pointer */
- completion_queue_put_value = (
- (SMU_CQPR_GEN_VAL(POINTER, 0))
- | (SMU_CQPR_GEN_VAL(EVENT_POINTER, 0))
- );
-
- writel(completion_queue_put_value,
- &scic->smu_registers->completion_queue_put);
-
- /* Initialize the cycle bit of the completion queue entries */
- for (index = 0; index < scic->completion_queue_entries; index++) {
- /*
- * If get.cycle_bit != completion_queue.cycle_bit
- * its not a valid completion queue entry
- * so at system start all entries are invalid */
- scic->completion_queue[index] = 0x80000000;
- }
-}
-
-/**
- * This method initializes the hardware unsolicited frame queue.
- *
- *
- */
-static void scic_sds_controller_initialize_unsolicited_frame_queue(
- struct scic_sds_controller *scic)
-{
- u32 frame_queue_control_value;
- u32 frame_queue_get_value;
- u32 frame_queue_put_value;
-
- /* Write the queue size */
- frame_queue_control_value =
- SCU_UFQC_GEN_VAL(QUEUE_SIZE,
- scic->uf_control.address_table.count);
-
- writel(frame_queue_control_value,
- &scic->scu_registers->sdma.unsolicited_frame_queue_control);
-
- /* Setup the get pointer for the unsolicited frame queue */
- frame_queue_get_value = (
- SCU_UFQGP_GEN_VAL(POINTER, 0)
- | SCU_UFQGP_GEN_BIT(ENABLE_BIT)
- );
-
- writel(frame_queue_get_value,
- &scic->scu_registers->sdma.unsolicited_frame_get_pointer);
- /* Setup the put pointer for the unsolicited frame queue */
- frame_queue_put_value = SCU_UFQPP_GEN_VAL(POINTER, 0);
- writel(frame_queue_put_value,
- &scic->scu_registers->sdma.unsolicited_frame_put_pointer);
-}
-
-/**
- * This method enables the hardware port task scheduler.
- *
- *
- */
-static void scic_sds_controller_enable_port_task_scheduler(
- struct scic_sds_controller *scic)
-{
- u32 port_task_scheduler_value;
-
- port_task_scheduler_value =
- readl(&scic->scu_registers->peg0.ptsg.control);
- port_task_scheduler_value |=
- (SCU_PTSGCR_GEN_BIT(ETM_ENABLE) |
- SCU_PTSGCR_GEN_BIT(PTSG_ENABLE));
- writel(port_task_scheduler_value,
- &scic->scu_registers->peg0.ptsg.control);
-}
-
-/**
- *
- *
- * This macro is used to delay between writes to the AFE registers during AFE
- * initialization.
- */
-#define AFE_REGISTER_WRITE_DELAY 10
-
-/* Initialize the AFE for this phy index. We need to read the AFE setup from
- * the OEM parameters none
- */
-static void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic)
-{
- const struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1;
- u32 afe_status;
- u32 phy_id;
-
- /* Clear DFX Status registers */
- writel(0x0081000f, &scic->scu_registers->afe.afe_dfx_master_control0);
- udelay(AFE_REGISTER_WRITE_DELAY);
-
- if (is_b0()) {
- /* PM Rx Equalization Save, PM SPhy Rx Acknowledgement
- * Timer, PM Stagger Timer */
- writel(0x0007BFFF, &scic->scu_registers->afe.afe_pmsn_master_control2);
- udelay(AFE_REGISTER_WRITE_DELAY);
- }
-
- /* Configure bias currents to normal */
- if (is_a0())
- writel(0x00005500, &scic->scu_registers->afe.afe_bias_control);
- else if (is_a2())
- writel(0x00005A00, &scic->scu_registers->afe.afe_bias_control);
- else if (is_b0())
- writel(0x00005F00, &scic->scu_registers->afe.afe_bias_control);
-
- udelay(AFE_REGISTER_WRITE_DELAY);
-
- /* Enable PLL */
- if (is_b0())
- writel(0x80040A08, &scic->scu_registers->afe.afe_pll_control0);
- else
- writel(0x80040908, &scic->scu_registers->afe.afe_pll_control0);
-
- udelay(AFE_REGISTER_WRITE_DELAY);
-
- /* Wait for the PLL to lock */
- do {
- afe_status = readl(&scic->scu_registers->afe.afe_common_block_status);
- udelay(AFE_REGISTER_WRITE_DELAY);
- } while ((afe_status & 0x00001000) == 0);
-
- if (is_a0() || is_a2()) {
- /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */
- writel(0x7bcc96ad, &scic->scu_registers->afe.afe_pmsn_master_control0);
- udelay(AFE_REGISTER_WRITE_DELAY);
- }
-
- for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) {
- const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id];
-
- if (is_b0()) {
- /* Configure transmitter SSC parameters */
- writel(0x00030000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control);
- udelay(AFE_REGISTER_WRITE_DELAY);
- } else {
- /*
- * All defaults, except the Receive Word Alignament/Comma Detect
- * Enable....(0xe800) */
- writel(0x00004512, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0);
- udelay(AFE_REGISTER_WRITE_DELAY);
-
- writel(0x0050100F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1);
- udelay(AFE_REGISTER_WRITE_DELAY);
- }
-
- /*
- * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
- * & increase TX int & ext bias 20%....(0xe85c) */
- if (is_a0())
- writel(0x000003D4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
- else if (is_a2())
- writel(0x000003F0, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
- else {
- /* Power down TX and RX (PWRDNTX and PWRDNRX) */
- writel(0x000003d7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
- udelay(AFE_REGISTER_WRITE_DELAY);
-
- /*
- * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
- * & increase TX int & ext bias 20%....(0xe85c) */
- writel(0x000003d4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
- }
- udelay(AFE_REGISTER_WRITE_DELAY);
-
- if (is_a0() || is_a2()) {
- /* Enable TX equalization (0xe824) */
- writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
- udelay(AFE_REGISTER_WRITE_DELAY);
- }
-
- /*
- * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On),
- * RDD=0x0(RX Detect Enabled) ....(0xe800) */
- writel(0x00004100, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0);
- udelay(AFE_REGISTER_WRITE_DELAY);
-
- /* Leave DFE/FFE on */
- if (is_a0())
- writel(0x3F09983F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
- else if (is_a2())
- writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
- else {
- writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
- udelay(AFE_REGISTER_WRITE_DELAY);
- /* Enable TX equalization (0xe824) */
- writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
- }
- udelay(AFE_REGISTER_WRITE_DELAY);
-
- writel(oem_phy->afe_tx_amp_control0,
- &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0);
- udelay(AFE_REGISTER_WRITE_DELAY);
-
- writel(oem_phy->afe_tx_amp_control1,
- &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1);
- udelay(AFE_REGISTER_WRITE_DELAY);
-
- writel(oem_phy->afe_tx_amp_control2,
- &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2);
- udelay(AFE_REGISTER_WRITE_DELAY);
-
- writel(oem_phy->afe_tx_amp_control3,
- &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3);
- udelay(AFE_REGISTER_WRITE_DELAY);
- }
-
- /* Transfer control to the PEs */
- writel(0x00010f00, &scic->scu_registers->afe.afe_dfx_master_control0);
- udelay(AFE_REGISTER_WRITE_DELAY);
-}
-
-/*
- * ****************************************************************************-
- * * SCIC SDS Controller Internal Start/Stop Routines
- * ****************************************************************************- */
-
-
-/**
- * This method will attempt to transition into the ready state for the
- * controller and indicate that the controller start operation has completed
- * if all criteria are met.
- * @scic: This parameter indicates the controller object for which
- * to transition to ready.
- * @status: This parameter indicates the status value to be pass into the call
- * to scic_cb_controller_start_complete().
- *
- * none.
- */
-static void scic_sds_controller_transition_to_ready(
- struct scic_sds_controller *scic,
- enum sci_status status)
-{
- struct isci_host *ihost = scic_to_ihost(scic);
-
- if (scic->state_machine.current_state_id ==
- SCI_BASE_CONTROLLER_STATE_STARTING) {
- /*
- * We move into the ready state, because some of the phys/ports
- * may be up and operational.
- */
- sci_base_state_machine_change_state(&scic->state_machine,
- SCI_BASE_CONTROLLER_STATE_READY);
-
- isci_host_start_complete(ihost, status);
- }
-}
-
-static void scic_sds_controller_timeout_handler(void *_scic)
-{
- struct scic_sds_controller *scic = _scic;
- struct isci_host *ihost = scic_to_ihost(scic);
- struct sci_base_state_machine *sm = &scic->state_machine;
-
- if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STARTING)
- scic_sds_controller_transition_to_ready(scic, SCI_FAILURE_TIMEOUT);
- else if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STOPPING) {
- sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_FAILED);
- isci_host_stop_complete(ihost, SCI_FAILURE_TIMEOUT);
- } else /* / @todo Now what do we want to do in this case? */
- dev_err(scic_to_dev(scic),
- "%s: Controller timer fired when controller was not "
- "in a state being timed.\n",
- __func__);
-}
-
-static enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller *scic)
-{
- u32 index;
- enum sci_status port_status;
- enum sci_status status = SCI_SUCCESS;
- struct isci_host *ihost = scic_to_ihost(scic);
-
- for (index = 0; index < scic->logical_port_entries; index++) {
- struct scic_sds_port *sci_port = &ihost->ports[index].sci;
- scic_sds_port_handler_t stop;
-
- stop = sci_port->state_handlers->stop_handler;
- port_status = stop(sci_port);
-
- if ((port_status != SCI_SUCCESS) &&
- (port_status != SCI_FAILURE_INVALID_STATE)) {
- status = SCI_FAILURE;
-
- dev_warn(scic_to_dev(scic),
- "%s: Controller stop operation failed to "
- "stop port %d because of status %d.\n",
- __func__,
- sci_port->logical_port_index,
- port_status);
- }
- }
-
- return status;
-}
-
-static inline void scic_sds_controller_phy_timer_start(
- struct scic_sds_controller *scic)
-{
- isci_timer_start(scic->phy_startup_timer,
- SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT);
-
- scic->phy_startup_timer_pending = true;
-}
-
-static void scic_sds_controller_phy_timer_stop(struct scic_sds_controller *scic)
-{
- isci_timer_stop(scic->phy_startup_timer);
-
- scic->phy_startup_timer_pending = false;
-}
-
-/**
- * scic_sds_controller_start_next_phy - start phy
- * @scic: controller
- *
- * If all the phys have been started, then attempt to transition the
- * controller to the READY state and inform the user
- * (scic_cb_controller_start_complete()).
- */
-static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_controller *scic)
-{
- struct isci_host *ihost = scic_to_ihost(scic);
- struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1;
- struct scic_sds_phy *sci_phy;
- enum sci_status status;
-
- status = SCI_SUCCESS;
-
- if (scic->phy_startup_timer_pending)
- return status;
-
- if (scic->next_phy_to_start >= SCI_MAX_PHYS) {
- bool is_controller_start_complete = true;
- u32 state;
- u8 index;
-
- for (index = 0; index < SCI_MAX_PHYS; index++) {
- sci_phy = &ihost->phys[index].sci;
- state = sci_phy->state_machine.current_state_id;
-
- if (!scic_sds_phy_get_port(sci_phy))
- continue;
-
- /* The controller start operation is complete iff:
- * - all links have been given an opportunity to start
- * - have no indication of a connected device
- * - have an indication of a connected device and it has
- * finished the link training process.
- */
- if ((sci_phy->is_in_link_training == false &&
- state == SCI_BASE_PHY_STATE_INITIAL) ||
- (sci_phy->is_in_link_training == false &&
- state == SCI_BASE_PHY_STATE_STOPPED) ||
- (sci_phy->is_in_link_training == true &&
- state == SCI_BASE_PHY_STATE_STARTING)) {
- is_controller_start_complete = false;
- break;
- }
- }
-
- /*
- * The controller has successfully finished the start process.
- * Inform the SCI Core user and transition to the READY state. */
- if (is_controller_start_complete == true) {
- scic_sds_controller_transition_to_ready(scic, SCI_SUCCESS);
- scic_sds_controller_phy_timer_stop(scic);
- }
- } else {
- sci_phy = &ihost->phys[scic->next_phy_to_start].sci;
-
- if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) {
- if (scic_sds_phy_get_port(sci_phy) == NULL) {
- scic->next_phy_to_start++;
-
- /* Caution recursion ahead be forwarned
- *
- * The PHY was never added to a PORT in MPC mode
- * so start the next phy in sequence This phy
- * will never go link up and will not draw power
- * the OEM parameters either configured the phy
- * incorrectly for the PORT or it was never
- * assigned to a PORT
- */
- return scic_sds_controller_start_next_phy(scic);
- }
- }
-
- status = scic_sds_phy_start(sci_phy);
-
- if (status == SCI_SUCCESS) {
- scic_sds_controller_phy_timer_start(scic);
- } else {
- dev_warn(scic_to_dev(scic),
- "%s: Controller stop operation failed "
- "to stop phy %d because of status "
- "%d.\n",
- __func__,
- ihost->phys[scic->next_phy_to_start].sci.phy_index,
- status);
- }
-
- scic->next_phy_to_start++;
- }
-
- return status;
-}
-
-static void scic_sds_controller_phy_startup_timeout_handler(void *_scic)
-{
- struct scic_sds_controller *scic = _scic;
- enum sci_status status;
-
- scic->phy_startup_timer_pending = false;
- status = SCI_FAILURE;
- while (status != SCI_SUCCESS)
- status = scic_sds_controller_start_next_phy(scic);
-}
-
-static enum sci_status scic_sds_controller_initialize_phy_startup(struct scic_sds_controller *scic)
-{
- struct isci_host *ihost = scic_to_ihost(scic);
-
- scic->phy_startup_timer = isci_timer_create(ihost,
- scic,
- scic_sds_controller_phy_startup_timeout_handler);
-
- if (scic->phy_startup_timer == NULL)
- return SCI_FAILURE_INSUFFICIENT_RESOURCES;
- else {
- scic->next_phy_to_start = 0;
- scic->phy_startup_timer_pending = false;
- }
-
- return SCI_SUCCESS;
-}
-
-static enum sci_status scic_sds_controller_stop_phys(struct scic_sds_controller *scic)
-{
- u32 index;
- enum sci_status status;
- enum sci_status phy_status;
- struct isci_host *ihost = scic_to_ihost(scic);
-
- status = SCI_SUCCESS;
-
- for (index = 0; index < SCI_MAX_PHYS; index++) {
- phy_status = scic_sds_phy_stop(&ihost->phys[index].sci);
-
- if (phy_status != SCI_SUCCESS &&
- phy_status != SCI_FAILURE_INVALID_STATE) {
- status = SCI_FAILURE;
-
- dev_warn(scic_to_dev(scic),
- "%s: Controller stop operation failed to stop "
- "phy %d because of status %d.\n",
- __func__,
- ihost->phys[index].sci.phy_index, phy_status);
- }
- }
-
- return status;
-}
-
-static enum sci_status scic_sds_controller_stop_devices(struct scic_sds_controller *scic)
-{
- u32 index;
- enum sci_status status;
- enum sci_status device_status;
-
- status = SCI_SUCCESS;
-
- for (index = 0; index < scic->remote_node_entries; index++) {
- if (scic->device_table[index] != NULL) {
- /* / @todo What timeout value do we want to provide to this request? */
- device_status = scic_remote_device_stop(scic->device_table[index], 0);
-
- if ((device_status != SCI_SUCCESS) &&
- (device_status != SCI_FAILURE_INVALID_STATE)) {
- dev_warn(scic_to_dev(scic),
- "%s: Controller stop operation failed "
- "to stop device 0x%p because of "
- "status %d.\n",
- __func__,
- scic->device_table[index], device_status);
- }
- }
- }
-
- return status;
-}
-
-static void scic_sds_controller_power_control_timer_start(struct scic_sds_controller *scic)
-{
- isci_timer_start(scic->power_control.timer,
- SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL);
-
- scic->power_control.timer_started = true;
-}
-
-static void scic_sds_controller_power_control_timer_stop(struct scic_sds_controller *scic)
-{
- if (scic->power_control.timer_started) {
- isci_timer_stop(scic->power_control.timer);
- scic->power_control.timer_started = false;
- }
-}
-
-static void scic_sds_controller_power_control_timer_restart(struct scic_sds_controller *scic)
-{
- scic_sds_controller_power_control_timer_stop(scic);
- scic_sds_controller_power_control_timer_start(scic);
-}
-
-static void scic_sds_controller_power_control_timer_handler(
- void *controller)
-{
- struct scic_sds_controller *scic;
-
- scic = (struct scic_sds_controller *)controller;
-
- scic->power_control.phys_granted_power = 0;
-
- if (scic->power_control.phys_waiting == 0) {
- scic->power_control.timer_started = false;
- } else {
- struct scic_sds_phy *sci_phy = NULL;
- u8 i;
-
- for (i = 0;
- (i < SCI_MAX_PHYS)
- && (scic->power_control.phys_waiting != 0);
- i++) {
- if (scic->power_control.requesters[i] != NULL) {
- if (scic->power_control.phys_granted_power <
- scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) {
- sci_phy = scic->power_control.requesters[i];
- scic->power_control.requesters[i] = NULL;
- scic->power_control.phys_waiting--;
- scic->power_control.phys_granted_power++;
- scic_sds_phy_consume_power_handler(sci_phy);
- } else {
- break;
- }
- }
- }
-
- /*
- * It doesn't matter if the power list is empty, we need to start the
- * timer in case another phy becomes ready.
- */
- scic_sds_controller_power_control_timer_start(scic);
- }
-}
-
-/**
- * This method inserts the phy in the stagger spinup control queue.
- * @scic:
- *
- *
- */
-void scic_sds_controller_power_control_queue_insert(
- struct scic_sds_controller *scic,
- struct scic_sds_phy *sci_phy)
-{
- BUG_ON(sci_phy == NULL);
-
- if (scic->power_control.phys_granted_power <
- scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) {
- scic->power_control.phys_granted_power++;
- scic_sds_phy_consume_power_handler(sci_phy);
-
- /*
- * stop and start the power_control timer. When the timer fires, the
- * no_of_phys_granted_power will be set to 0
- */
- scic_sds_controller_power_control_timer_restart(scic);
- } else {
- /* Add the phy in the waiting list */
- scic->power_control.requesters[sci_phy->phy_index] = sci_phy;
- scic->power_control.phys_waiting++;
- }
-}
-
-/**
- * This method removes the phy from the stagger spinup control queue.
- * @scic:
- *
- *
- */
-void scic_sds_controller_power_control_queue_remove(
- struct scic_sds_controller *scic,
- struct scic_sds_phy *sci_phy)
-{
- BUG_ON(sci_phy == NULL);
-
- if (scic->power_control.requesters[sci_phy->phy_index] != NULL) {
- scic->power_control.phys_waiting--;
- }
-
- scic->power_control.requesters[sci_phy->phy_index] = NULL;
-}
-
-/*
- * ****************************************************************************-
- * * SCIC SDS Controller Completion Routines
- * ****************************************************************************- */
-
-/**
- * This method returns a true value if the completion queue has entries that
- * can be processed
- * @scic:
- *
- * bool true if the completion queue has entries to process false if the
- * completion queue has no entries to process
- */
-static bool scic_sds_controller_completion_queue_has_entries(
- struct scic_sds_controller *scic)
-{
- u32 get_value = scic->completion_queue_get;
- u32 get_index = get_value & SMU_COMPLETION_QUEUE_GET_POINTER_MASK;
-
- if (NORMALIZE_GET_POINTER_CYCLE_BIT(get_value) ==
- COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index]))
- return true;
-
- return false;
-}
-
-/**
- * This method processes a task completion notification. This is called from
- * within the controller completion handler.
- * @scic:
- * @completion_entry:
- *
- */
-static void scic_sds_controller_task_completion(
- struct scic_sds_controller *scic,
- u32 completion_entry)
-{
- u32 index;
- struct scic_sds_request *io_request;
-
- index = SCU_GET_COMPLETION_INDEX(completion_entry);
- io_request = scic->io_request_table[index];
-
- /* Make sure that we really want to process this IO request */
- if (
- (io_request != NULL)
- && (io_request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG)
- && (
- scic_sds_io_tag_get_sequence(io_request->io_tag)
- == scic->io_request_sequence[index]
- )
- ) {
- /* Yep this is a valid io request pass it along to the io request handler */
- scic_sds_io_request_tc_completion(io_request, completion_entry);
- }
-}
-
-/**
- * This method processes an SDMA completion event. This is called from within
- * the controller completion handler.
- * @scic:
- * @completion_entry:
- *
- */
-static void scic_sds_controller_sdma_completion(
- struct scic_sds_controller *scic,
- u32 completion_entry)
-{
- u32 index;
- struct scic_sds_request *io_request;
- struct scic_sds_remote_device *device;
-
- index = SCU_GET_COMPLETION_INDEX(completion_entry);
-
- switch (scu_get_command_request_type(completion_entry)) {
- case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC:
- case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC:
- io_request = scic->io_request_table[index];
- dev_warn(scic_to_dev(scic),
- "%s: SCIC SDS Completion type SDMA %x for io request "
- "%p\n",
- __func__,
- completion_entry,
- io_request);
- /* @todo For a post TC operation we need to fail the IO
- * request
- */
- break;
-
- case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC:
- case SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC:
- case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC:
- device = scic->device_table[index];
- dev_warn(scic_to_dev(scic),
- "%s: SCIC SDS Completion type SDMA %x for remote "
- "device %p\n",
- __func__,
- completion_entry,
- device);
- /* @todo For a port RNC operation we need to fail the
- * device
- */
- break;
-
- default:
- dev_warn(scic_to_dev(scic),
- "%s: SCIC SDS Completion unknown SDMA completion "
- "type %x\n",
- __func__,
- completion_entry);
- break;
-
- }
-}
-
-static void scic_sds_controller_unsolicited_frame(struct scic_sds_controller *scic,
- u32 completion_entry)
-{
- u32 index;
- u32 frame_index;
-
- struct isci_host *ihost = scic_to_ihost(scic);
- struct scu_unsolicited_frame_header *frame_header;
- struct scic_sds_phy *phy;
- struct scic_sds_remote_device *device;
-
- enum sci_status result = SCI_FAILURE;
-
- frame_index = SCU_GET_FRAME_INDEX(completion_entry);
-
- frame_header = scic->uf_control.buffers.array[frame_index].header;
- scic->uf_control.buffers.array[frame_index].state = UNSOLICITED_FRAME_IN_USE;
-
- if (SCU_GET_FRAME_ERROR(completion_entry)) {
- /*
- * / @todo If the IAF frame or SIGNATURE FIS frame has an error will
- * / this cause a problem? We expect the phy initialization will
- * / fail if there is an error in the frame. */
- scic_sds_controller_release_frame(scic, frame_index);
- return;
- }
-
- if (frame_header->is_address_frame) {
- index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry);
- phy = &ihost->phys[index].sci;
- result = scic_sds_phy_frame_handler(phy, frame_index);
- } else {
-
- index = SCU_GET_COMPLETION_INDEX(completion_entry);
-
- if (index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) {
- /*
- * This is a signature fis or a frame from a direct attached SATA
- * device that has not yet been created. In either case forwared
- * the frame to the PE and let it take care of the frame data. */
- index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry);
- phy = &ihost->phys[index].sci;
- result = scic_sds_phy_frame_handler(phy, frame_index);
- } else {
- if (index < scic->remote_node_entries)
- device = scic->device_table[index];
- else
- device = NULL;
-
- if (device != NULL)
- result = scic_sds_remote_device_frame_handler(device, frame_index);
- else
- scic_sds_controller_release_frame(scic, frame_index);
- }
- }
-
- if (result != SCI_SUCCESS) {
- /*
- * / @todo Is there any reason to report some additional error message
- * / when we get this failure notifiction? */
- }
-}
-
-static void scic_sds_controller_event_completion(struct scic_sds_controller *scic,
- u32 completion_entry)
-{
- struct isci_host *ihost = scic_to_ihost(scic);
- struct scic_sds_request *io_request;
- struct scic_sds_remote_device *device;
- struct scic_sds_phy *phy;
- u32 index;
-
- index = SCU_GET_COMPLETION_INDEX(completion_entry);
-
- switch (scu_get_event_type(completion_entry)) {
- case SCU_EVENT_TYPE_SMU_COMMAND_ERROR:
- /* / @todo The driver did something wrong and we need to fix the condtion. */
- dev_err(scic_to_dev(scic),
- "%s: SCIC Controller 0x%p received SMU command error "
- "0x%x\n",
- __func__,
- scic,
- completion_entry);
- break;
-
- case SCU_EVENT_TYPE_SMU_PCQ_ERROR:
- case SCU_EVENT_TYPE_SMU_ERROR:
- case SCU_EVENT_TYPE_FATAL_MEMORY_ERROR:
- /*
- * / @todo This is a hardware failure and its likely that we want to
- * / reset the controller. */
- dev_err(scic_to_dev(scic),
- "%s: SCIC Controller 0x%p received fatal controller "
- "event 0x%x\n",
- __func__,
- scic,
- completion_entry);
- break;
-
- case SCU_EVENT_TYPE_TRANSPORT_ERROR:
- io_request = scic->io_request_table[index];
- scic_sds_io_request_event_handler(io_request, completion_entry);
- break;
-
- case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT:
- switch (scu_get_event_specifier(completion_entry)) {
- case SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE:
- case SCU_EVENT_SPECIFIC_TASK_TIMEOUT:
- io_request = scic->io_request_table[index];
- if (io_request != NULL)
- scic_sds_io_request_event_handler(io_request, completion_entry);
- else
- dev_warn(scic_to_dev(scic),
- "%s: SCIC Controller 0x%p received "
- "event 0x%x for io request object "
- "that doesnt exist.\n",
- __func__,
- scic,
- completion_entry);
-
- break;
-
- case SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT:
- device = scic->device_table[index];
- if (device != NULL)
- scic_sds_remote_device_event_handler(device, completion_entry);
- else
- dev_warn(scic_to_dev(scic),
- "%s: SCIC Controller 0x%p received "
- "event 0x%x for remote device object "
- "that doesnt exist.\n",
- __func__,
- scic,
- completion_entry);
-
- break;
- }
- break;
-
- case SCU_EVENT_TYPE_BROADCAST_CHANGE:
- /*
- * direct the broadcast change event to the phy first and then let
- * the phy redirect the broadcast change to the port object */
- case SCU_EVENT_TYPE_ERR_CNT_EVENT:
- /*
- * direct error counter event to the phy object since that is where
- * we get the event notification. This is a type 4 event. */
- case SCU_EVENT_TYPE_OSSP_EVENT:
- index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry);
- phy = &ihost->phys[index].sci;
- scic_sds_phy_event_handler(phy, completion_entry);
- break;
-
- case SCU_EVENT_TYPE_RNC_SUSPEND_TX:
- case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX:
- case SCU_EVENT_TYPE_RNC_OPS_MISC:
- if (index < scic->remote_node_entries) {
- device = scic->device_table[index];
-
- if (device != NULL)
- scic_sds_remote_device_event_handler(device, completion_entry);
- } else
- dev_err(scic_to_dev(scic),
- "%s: SCIC Controller 0x%p received event 0x%x "
- "for remote device object 0x%0x that doesnt "
- "exist.\n",
- __func__,
- scic,
- completion_entry,
- index);
-
- break;
-
- default:
- dev_warn(scic_to_dev(scic),
- "%s: SCIC Controller received unknown event code %x\n",
- __func__,
- completion_entry);
- break;
- }
-}
-
-/**
- * This method is a private routine for processing the completion queue entries.
- * @scic:
- *
- */
-static void scic_sds_controller_process_completions(
- struct scic_sds_controller *scic)
-{
- u32 completion_count = 0;
- u32 completion_entry;
- u32 get_index;
- u32 get_cycle;
- u32 event_index;
- u32 event_cycle;
-
- dev_dbg(scic_to_dev(scic),
- "%s: completion queue begining get:0x%08x\n",
- __func__,
- scic->completion_queue_get);
-
- /* Get the component parts of the completion queue */
- get_index = NORMALIZE_GET_POINTER(scic->completion_queue_get);
- get_cycle = SMU_CQGR_CYCLE_BIT & scic->completion_queue_get;
-
- event_index = NORMALIZE_EVENT_POINTER(scic->completion_queue_get);
- event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & scic->completion_queue_get;
-
- while (
- NORMALIZE_GET_POINTER_CYCLE_BIT(get_cycle)
- == COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index])
- ) {
- completion_count++;
-
- completion_entry = scic->completion_queue[get_index];
- INCREMENT_COMPLETION_QUEUE_GET(scic, get_index, get_cycle);
-
- dev_dbg(scic_to_dev(scic),
- "%s: completion queue entry:0x%08x\n",
- __func__,
- completion_entry);
-
- switch (SCU_GET_COMPLETION_TYPE(completion_entry)) {
- case SCU_COMPLETION_TYPE_TASK:
- scic_sds_controller_task_completion(scic, completion_entry);
- break;
-
- case SCU_COMPLETION_TYPE_SDMA:
- scic_sds_controller_sdma_completion(scic, completion_entry);
- break;
-
- case SCU_COMPLETION_TYPE_UFI:
- scic_sds_controller_unsolicited_frame(scic, completion_entry);
- break;
-
- case SCU_COMPLETION_TYPE_EVENT:
- INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle);
- scic_sds_controller_event_completion(scic, completion_entry);
- break;
-
- case SCU_COMPLETION_TYPE_NOTIFY:
- /*
- * Presently we do the same thing with a notify event that we do with the
- * other event codes. */
- INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle);
- scic_sds_controller_event_completion(scic, completion_entry);
- break;
-
- default:
- dev_warn(scic_to_dev(scic),
- "%s: SCIC Controller received unknown "
- "completion type %x\n",
- __func__,
- completion_entry);
- break;
- }
- }
-
- /* Update the get register if we completed one or more entries */
- if (completion_count > 0) {
- scic->completion_queue_get =
- SMU_CQGR_GEN_BIT(ENABLE) |
- SMU_CQGR_GEN_BIT(EVENT_ENABLE) |
- event_cycle |
- SMU_CQGR_GEN_VAL(EVENT_POINTER, event_index) |
- get_cycle |
- SMU_CQGR_GEN_VAL(POINTER, get_index);
-
- writel(scic->completion_queue_get,
- &scic->smu_registers->completion_queue_get);
-
- }
-
- dev_dbg(scic_to_dev(scic),
- "%s: completion queue ending get:0x%08x\n",
- __func__,
- scic->completion_queue_get);
-
-}
-
-bool scic_sds_controller_isr(struct scic_sds_controller *scic)
-{
- if (scic_sds_controller_completion_queue_has_entries(scic)) {
- return true;
- } else {
- /*
- * we have a spurious interrupt it could be that we have already
- * emptied the completion queue from a previous interrupt */
- writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status);
-
- /*
- * There is a race in the hardware that could cause us not to be notified
- * of an interrupt completion if we do not take this step. We will mask
- * then unmask the interrupts so if there is another interrupt pending
- * the clearing of the interrupt source we get the next interrupt message. */
- writel(0xFF000000, &scic->smu_registers->interrupt_mask);
- writel(0, &scic->smu_registers->interrupt_mask);
- }
-
- return false;
-}
-
-void scic_sds_controller_completion_handler(struct scic_sds_controller *scic)
-{
- /* Empty out the completion queue */
- if (scic_sds_controller_completion_queue_has_entries(scic))
- scic_sds_controller_process_completions(scic);
-
- /* Clear the interrupt and enable all interrupts again */
- writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status);
- /* Could we write the value of SMU_ISR_COMPLETION? */
- writel(0xFF000000, &scic->smu_registers->interrupt_mask);
- writel(0, &scic->smu_registers->interrupt_mask);
-}
-
-bool scic_sds_controller_error_isr(struct scic_sds_controller *scic)
-{
- u32 interrupt_status;
-
- interrupt_status =
- readl(&scic->smu_registers->interrupt_status);
- interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND);
-
- if (interrupt_status != 0) {
- /*
- * There is an error interrupt pending so let it through and handle
- * in the callback */
- return true;
- }
-
- /*
- * There is a race in the hardware that could cause us not to be notified
- * of an interrupt completion if we do not take this step. We will mask
- * then unmask the error interrupts so if there was another interrupt
- * pending we will be notified.
- * Could we write the value of (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND)? */
- writel(0xff, &scic->smu_registers->interrupt_mask);
- writel(0, &scic->smu_registers->interrupt_mask);
-
- return false;
-}
-
-void scic_sds_controller_error_handler(struct scic_sds_controller *scic)
-{
- u32 interrupt_status;
-
- interrupt_status =
- readl(&scic->smu_registers->interrupt_status);
-
- if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) &&
- scic_sds_controller_completion_queue_has_entries(scic)) {
-
- scic_sds_controller_process_completions(scic);
- writel(SMU_ISR_QUEUE_SUSPEND, &scic->smu_registers->interrupt_status);
- } else {
- dev_err(scic_to_dev(scic), "%s: status: %#x\n", __func__,
- interrupt_status);
-
- sci_base_state_machine_change_state(&scic->state_machine,
- SCI_BASE_CONTROLLER_STATE_FAILED);
-
- return;
- }
-
- /* If we dont process any completions I am not sure that we want to do this.
- * We are in the middle of a hardware fault and should probably be reset.
- */
- writel(0, &scic->smu_registers->interrupt_mask);
-}
-
-
-
-
-void scic_sds_controller_link_up(struct scic_sds_controller *scic,
- struct scic_sds_port *port, struct scic_sds_phy *phy)
-{
- switch (scic->state_machine.current_state_id) {
- case SCI_BASE_CONTROLLER_STATE_STARTING:
- scic_sds_controller_phy_timer_stop(scic);
- scic->port_agent.link_up_handler(scic, &scic->port_agent,
- port, phy);
- scic_sds_controller_start_next_phy(scic);
- break;
- case SCI_BASE_CONTROLLER_STATE_READY:
- scic->port_agent.link_up_handler(scic, &scic->port_agent,
- port, phy);
- break;
- default:
- dev_dbg(scic_to_dev(scic),
- "%s: SCIC Controller linkup event from phy %d in "
- "unexpected state %d\n", __func__, phy->phy_index,
- scic->state_machine.current_state_id);
- }
-}
-
-void scic_sds_controller_link_down(struct scic_sds_controller *scic,
- struct scic_sds_port *port, struct scic_sds_phy *phy)
-{
- switch (scic->state_machine.current_state_id) {
- case SCI_BASE_CONTROLLER_STATE_STARTING:
- case SCI_BASE_CONTROLLER_STATE_READY:
- scic->port_agent.link_down_handler(scic, &scic->port_agent,
- port, phy);
- break;
- default:
- dev_dbg(scic_to_dev(scic),
- "%s: SCIC Controller linkdown event from phy %d in "
- "unexpected state %d\n",
- __func__,
- phy->phy_index,
- scic->state_machine.current_state_id);
- }
-}
-
-/**
- * This is a helper method to determine if any remote devices on this
- * controller are still in the stopping state.
- *
- */
-static bool scic_sds_controller_has_remote_devices_stopping(
- struct scic_sds_controller *controller)
-{
- u32 index;
-
- for (index = 0; index < controller->remote_node_entries; index++) {
- if ((controller->device_table[index] != NULL) &&
- (controller->device_table[index]->state_machine.current_state_id
- == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING))
- return true;
- }
-
- return false;
-}
-
-/**
- * This method is called by the remote device to inform the controller
- * object that the remote device has stopped.
- */
-void scic_sds_controller_remote_device_stopped(struct scic_sds_controller *scic,
- struct scic_sds_remote_device *sci_dev)
-{
- if (scic->state_machine.current_state_id !=
- SCI_BASE_CONTROLLER_STATE_STOPPING) {
- dev_dbg(scic_to_dev(scic),
- "SCIC Controller 0x%p remote device stopped event "
- "from device 0x%p in unexpected state %d\n",
- scic, sci_dev,
- scic->state_machine.current_state_id);
- return;
- }
-
- if (!scic_sds_controller_has_remote_devices_stopping(scic)) {
- sci_base_state_machine_change_state(&scic->state_machine,
- SCI_BASE_CONTROLLER_STATE_STOPPED);
- }
-}
-
-/**
- * This method will write to the SCU PCP register the request value. The method
- * is used to suspend/resume ports, devices, and phys.
- * @scic:
- *
- *
- */
-void scic_sds_controller_post_request(
- struct scic_sds_controller *scic,
- u32 request)
-{
- dev_dbg(scic_to_dev(scic),
- "%s: SCIC Controller 0x%p post request 0x%08x\n",
- __func__,
- scic,
- request);
-
- writel(request, &scic->smu_registers->post_context_port);
-}
-
-/**
- * This method will copy the soft copy of the task context into the physical
- * memory accessible by the controller.
- * @scic: This parameter specifies the controller for which to copy
- * the task context.
- * @sci_req: This parameter specifies the request for which the task
- * context is being copied.
- *
- * After this call is made the SCIC_SDS_IO_REQUEST object will always point to
- * the physical memory version of the task context. Thus, all subsequent
- * updates to the task context are performed in the TC table (i.e. DMAable
- * memory). none
- */
-void scic_sds_controller_copy_task_context(
- struct scic_sds_controller *scic,
- struct scic_sds_request *sci_req)
-{
- struct scu_task_context *task_context_buffer;
-
- task_context_buffer = scic_sds_controller_get_task_context_buffer(
- scic, sci_req->io_tag);
-
- memcpy(task_context_buffer,
- sci_req->task_context_buffer,
- offsetof(struct scu_task_context, sgl_snapshot_ac));
-
- /*
- * Now that the soft copy of the TC has been copied into the TC
- * table accessible by the silicon. Thus, any further changes to
- * the TC (e.g. TC termination) occur in the appropriate location. */
- sci_req->task_context_buffer = task_context_buffer;
-}
-
-/**
- * This method returns the task context buffer for the given io tag.
- * @scic:
- * @io_tag:
- *
- * struct scu_task_context*
- */
-struct scu_task_context *scic_sds_controller_get_task_context_buffer(
- struct scic_sds_controller *scic,
- u16 io_tag
- ) {
- u16 task_index = scic_sds_io_tag_get_index(io_tag);
-
- if (task_index < scic->task_context_entries) {
- return &scic->task_context_table[task_index];
- }
-
- return NULL;
-}
-
-struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic,
- u16 io_tag)
-{
- u16 task_index;
- u16 task_sequence;
-
- task_index = scic_sds_io_tag_get_index(io_tag);
-
- if (task_index < scic->task_context_entries) {
- if (scic->io_request_table[task_index] != NULL) {
- task_sequence = scic_sds_io_tag_get_sequence(io_tag);
-
- if (task_sequence == scic->io_request_sequence[task_index]) {
- return scic->io_request_table[task_index];
- }
- }
- }
-
- return NULL;
-}
-
-/**
- * This method allocates remote node index and the reserves the remote node
- * context space for use. This method can fail if there are no more remote
- * node index available.
- * @scic: This is the controller object which contains the set of
- * free remote node ids
- * @sci_dev: This is the device object which is requesting the a remote node
- * id
- * @node_id: This is the remote node id that is assinged to the device if one
- * is available
- *
- * enum sci_status SCI_FAILURE_OUT_OF_RESOURCES if there are no available remote
- * node index available.
- */
-enum sci_status scic_sds_controller_allocate_remote_node_context(
- struct scic_sds_controller *scic,
- struct scic_sds_remote_device *sci_dev,
- u16 *node_id)
-{
- u16 node_index;
- u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev);
-
- node_index = scic_sds_remote_node_table_allocate_remote_node(
- &scic->available_remote_nodes, remote_node_count
- );
-
- if (node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) {
- scic->device_table[node_index] = sci_dev;
-
- *node_id = node_index;
-
- return SCI_SUCCESS;
- }
-
- return SCI_FAILURE_INSUFFICIENT_RESOURCES;
-}
-
-/**
- * This method frees the remote node index back to the available pool. Once
- * this is done the remote node context buffer is no longer valid and can
- * not be used.
- * @scic:
- * @sci_dev:
- * @node_id:
- *
- */
-void scic_sds_controller_free_remote_node_context(
- struct scic_sds_controller *scic,
- struct scic_sds_remote_device *sci_dev,
- u16 node_id)
-{
- u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev);
-
- if (scic->device_table[node_id] == sci_dev) {
- scic->device_table[node_id] = NULL;
-
- scic_sds_remote_node_table_release_remote_node_index(
- &scic->available_remote_nodes, remote_node_count, node_id
- );
- }
-}
-
-/**
- * This method returns the union scu_remote_node_context for the specified remote
- * node id.
- * @scic:
- * @node_id:
- *
- * union scu_remote_node_context*
- */
-union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer(
- struct scic_sds_controller *scic,
- u16 node_id
- ) {
- if (
- (node_id < scic->remote_node_entries)
- && (scic->device_table[node_id] != NULL)
- ) {
- return &scic->remote_node_context_table[node_id];
- }
-
- return NULL;
-}
-
-/**
- *
- * @resposne_buffer: This is the buffer into which the D2H register FIS will be
- * constructed.
- * @frame_header: This is the frame header returned by the hardware.
- * @frame_buffer: This is the frame buffer returned by the hardware.
- *
- * This method will combind the frame header and frame buffer to create a SATA
- * D2H register FIS none
- */
-void scic_sds_controller_copy_sata_response(
- void *response_buffer,
- void *frame_header,
- void *frame_buffer)
-{
- memcpy(response_buffer, frame_header, sizeof(u32));
-
- memcpy(response_buffer + sizeof(u32),
- frame_buffer,
- sizeof(struct dev_to_host_fis) - sizeof(u32));
-}
-
-/**
- * This method releases the frame once this is done the frame is available for
- * re-use by the hardware. The data contained in the frame header and frame
- * buffer is no longer valid. The UF queue get pointer is only updated if UF
- * control indicates this is appropriate.
- * @scic:
- * @frame_index:
- *
- */
-void scic_sds_controller_release_frame(
- struct scic_sds_controller *scic,
- u32 frame_index)
-{
- if (scic_sds_unsolicited_frame_control_release_frame(
- &scic->uf_control, frame_index) == true)
- writel(scic->uf_control.get,
- &scic->scu_registers->sdma.unsolicited_frame_get_pointer);
-}
-
-/**
- * This method sets user parameters and OEM parameters to default values.
- * Users can override these values utilizing the scic_user_parameters_set()
- * and scic_oem_parameters_set() methods.
- * @scic: This parameter specifies the controller for which to set the
- * configuration parameters to their default values.
- *
- */
-static void scic_sds_controller_set_default_config_parameters(struct scic_sds_controller *scic)
-{
- struct isci_host *ihost = scic_to_ihost(scic);
- u16 index;
-
- /* Default to APC mode. */
- scic->oem_parameters.sds1.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
-
- /* Default to APC mode. */
- scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up = 1;
-
- /* Default to no SSC operation. */
- scic->oem_parameters.sds1.controller.do_enable_ssc = false;
-
- /* Initialize all of the port parameter information to narrow ports. */
- for (index = 0; index < SCI_MAX_PORTS; index++) {
- scic->oem_parameters.sds1.ports[index].phy_mask = 0;
- }
-
- /* Initialize all of the phy parameter information. */
- for (index = 0; index < SCI_MAX_PHYS; index++) {
- /* Default to 6G (i.e. Gen 3) for now. */
- scic->user_parameters.sds1.phys[index].max_speed_generation = 3;
-
- /* the frequencies cannot be 0 */
- scic->user_parameters.sds1.phys[index].align_insertion_frequency = 0x7f;
- scic->user_parameters.sds1.phys[index].in_connection_align_insertion_frequency = 0xff;
- scic->user_parameters.sds1.phys[index].notify_enable_spin_up_insertion_frequency = 0x33;
-
- /*
- * Previous Vitesse based expanders had a arbitration issue that
- * is worked around by having the upper 32-bits of SAS address
- * with a value greater then the Vitesse company identifier.
- * Hence, usage of 0x5FCFFFFF. */
- scic->oem_parameters.sds1.phys[index].sas_address.low = 0x1 + ihost->id;
- scic->oem_parameters.sds1.phys[index].sas_address.high = 0x5FCFFFFF;
- }
-
- scic->user_parameters.sds1.stp_inactivity_timeout = 5;
- scic->user_parameters.sds1.ssp_inactivity_timeout = 5;
- scic->user_parameters.sds1.stp_max_occupancy_timeout = 5;
- scic->user_parameters.sds1.ssp_max_occupancy_timeout = 20;
- scic->user_parameters.sds1.no_outbound_task_timeout = 20;
-}
-
-/**
- * scic_controller_get_suggested_start_timeout() - This method returns the
- * suggested scic_controller_start() timeout amount. The user is free to
- * use any timeout value, but this method provides the suggested minimum
- * start timeout value. The returned value is based upon empirical
- * information determined as a result of interoperability testing.
- * @controller: the handle to the controller object for which to return the
- * suggested start timeout.
- *
- * This method returns the number of milliseconds for the suggested start
- * operation timeout.
- */
-u32 scic_controller_get_suggested_start_timeout(
- struct scic_sds_controller *sc)
-{
- /* Validate the user supplied parameters. */
- if (sc == NULL)
- return 0;
-
- /*
- * The suggested minimum timeout value for a controller start operation:
- *
- * Signature FIS Timeout
- * + Phy Start Timeout
- * + Number of Phy Spin Up Intervals
- * ---------------------------------
- * Number of milliseconds for the controller start operation.
- *
- * NOTE: The number of phy spin up intervals will be equivalent
- * to the number of phys divided by the number phys allowed
- * per interval - 1 (once OEM parameters are supported).
- * Currently we assume only 1 phy per interval. */
-
- return SCIC_SDS_SIGNATURE_FIS_TIMEOUT
- + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT
- + ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL);
-}
-
-/**
- * scic_controller_stop() - This method will stop an individual controller
- * object.This method will invoke the associated user callback upon
- * completion. The completion callback is called when the following
- * conditions are met: -# the method return status is SCI_SUCCESS. -# the
- * controller has been quiesced. This method will ensure that all IO
- * requests are quiesced, phys are stopped, and all additional operation by
- * the hardware is halted.
- * @controller: the handle to the controller object to stop.
- * @timeout: This parameter specifies the number of milliseconds in which the
- * stop operation should complete.
- *
- * The controller must be in the STARTED or STOPPED state. Indicate if the
- * controller stop method succeeded or failed in some way. SCI_SUCCESS if the
- * stop operation successfully began. SCI_WARNING_ALREADY_IN_STATE if the
- * controller is already in the STOPPED state. SCI_FAILURE_INVALID_STATE if the
- * controller is not either in the STARTED or STOPPED states.
- */
-enum sci_status scic_controller_stop(
- struct scic_sds_controller *scic,
- u32 timeout)
-{
- if (scic->state_machine.current_state_id !=
- SCI_BASE_CONTROLLER_STATE_READY) {
- dev_warn(scic_to_dev(scic),
- "SCIC Controller stop operation requested in "
- "invalid state\n");
- return SCI_FAILURE_INVALID_STATE;
- }
-
- isci_timer_start(scic->timeout_timer, timeout);
- sci_base_state_machine_change_state(&scic->state_machine,
- SCI_BASE_CONTROLLER_STATE_STOPPING);
- return SCI_SUCCESS;
-}
-
-/**
- * scic_controller_reset() - This method will reset the supplied core
- * controller regardless of the state of said controller. This operation is
- * considered destructive. In other words, all current operations are wiped
- * out. No IO completions for outstanding devices occur. Outstanding IO
- * requests are not aborted or completed at the actual remote device.
- * @controller: the handle to the controller object to reset.
- *
- * Indicate if the controller reset method succeeded or failed in some way.
- * SCI_SUCCESS if the reset operation successfully started. SCI_FATAL_ERROR if
- * the controller reset operation is unable to complete.
- */
-enum sci_status scic_controller_reset(
- struct scic_sds_controller *scic)
-{
- switch (scic->state_machine.current_state_id) {
- case SCI_BASE_CONTROLLER_STATE_RESET:
- case SCI_BASE_CONTROLLER_STATE_READY:
- case SCI_BASE_CONTROLLER_STATE_STOPPED:
- case SCI_BASE_CONTROLLER_STATE_FAILED:
- /*
- * The reset operation is not a graceful cleanup, just
- * perform the state transition.
- */
- sci_base_state_machine_change_state(&scic->state_machine,
- SCI_BASE_CONTROLLER_STATE_RESETTING);
- return SCI_SUCCESS;
- default:
- dev_warn(scic_to_dev(scic),
- "SCIC Controller reset operation requested in "
- "invalid state\n");
- return SCI_FAILURE_INVALID_STATE;
- }
-}
-
-/**
- * scic_controller_start_io() - This method is called by the SCI user to
- * send/start an IO request. If the method invocation is successful, then
- * the IO request has been queued to the hardware for processing.
- * @controller: the handle to the controller object for which to start an IO
- * request.
- * @remote_device: the handle to the remote device object for which to start an
- * IO request.
- * @io_request: the handle to the io request object to start.
- * @io_tag: This parameter specifies a previously allocated IO tag that the
- * user desires to be utilized for this request. This parameter is optional.
- * The user is allowed to supply SCI_CONTROLLER_INVALID_IO_TAG as the value
- * for this parameter.
- *
- * - IO tags are a protected resource. It is incumbent upon the SCI Core user
- * to ensure that each of the methods that may allocate or free available IO
- * tags are handled in a mutually exclusive manner. This method is one of said
- * methods requiring proper critical code section protection (e.g. semaphore,
- * spin-lock, etc.). - For SATA, the user is required to manage NCQ tags. As a
- * result, it is expected the user will have set the NCQ tag field in the host
- * to device register FIS prior to calling this method. There is also a
- * requirement for the user to call scic_stp_io_set_ncq_tag() prior to invoking
- * the scic_controller_start_io() method. scic_controller_allocate_tag() for
- * more information on allocating a tag. Indicate if the controller
- * successfully started the IO request. SCI_SUCCESS if the IO request was
- * successfully started. Determine the failure situations and return values.
- */
-enum sci_status scic_controller_start_io(
- struct scic_sds_controller *scic,
- struct scic_sds_remote_device *rdev,
- struct scic_sds_request *req,
- u16 io_tag)
-{
- enum sci_status status;
-
- if (scic->state_machine.current_state_id !=
- SCI_BASE_CONTROLLER_STATE_READY) {
- dev_warn(scic_to_dev(scic), "invalid state to start I/O");
- return SCI_FAILURE_INVALID_STATE;
- }
-
- status = scic_sds_remote_device_start_io(scic, rdev, req);
- if (status != SCI_SUCCESS)
- return status;
-
- scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req;
- scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(req));
- return SCI_SUCCESS;
-}
-
-/**
- * scic_controller_terminate_request() - This method is called by the SCI Core
- * user to terminate an ongoing (i.e. started) core IO request. This does
- * not abort the IO request at the target, but rather removes the IO request
- * from the host controller.
- * @controller: the handle to the controller object for which to terminate a
- * request.
- * @remote_device: the handle to the remote device object for which to
- * terminate a request.
- * @request: the handle to the io or task management request object to
- * terminate.
- *
- * Indicate if the controller successfully began the terminate process for the
- * IO request. SCI_SUCCESS if the terminate process was successfully started
- * for the request. Determine the failure situations and return values.
- */
-enum sci_status scic_controller_terminate_request(
- struct scic_sds_controller *scic,
- struct scic_sds_remote_device *rdev,
- struct scic_sds_request *req)
-{
- enum sci_status status;
-
- if (scic->state_machine.current_state_id !=
- SCI_BASE_CONTROLLER_STATE_READY) {
- dev_warn(scic_to_dev(scic),
- "invalid state to terminate request\n");
- return SCI_FAILURE_INVALID_STATE;
- }
-
- status = scic_sds_io_request_terminate(req);
- if (status != SCI_SUCCESS)
- return status;
-
- /*
- * Utilize the original post context command and or in the POST_TC_ABORT
- * request sub-type.
- */
- scic_sds_controller_post_request(scic,
- scic_sds_request_get_post_context(req) |
- SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT);
- return SCI_SUCCESS;
-}
-
-/**
- * scic_controller_complete_io() - This method will perform core specific
- * completion operations for an IO request. After this method is invoked,
- * the user should consider the IO request as invalid until it is properly
- * reused (i.e. re-constructed).
- * @controller: The handle to the controller object for which to complete the
- * IO request.
- * @remote_device: The handle to the remote device object for which to complete
- * the IO request.
- * @io_request: the handle to the io request object to complete.
- *
- * - IO tags are a protected resource. It is incumbent upon the SCI Core user
- * to ensure that each of the methods that may allocate or free available IO
- * tags are handled in a mutually exclusive manner. This method is one of said
- * methods requiring proper critical code section protection (e.g. semaphore,
- * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI
- * Core user, using the scic_controller_allocate_io_tag() method, then it is
- * the responsibility of the caller to invoke the scic_controller_free_io_tag()
- * method to free the tag (i.e. this method will not free the IO tag). Indicate
- * if the controller successfully completed the IO request. SCI_SUCCESS if the
- * completion process was successful.
- */
-enum sci_status scic_controller_complete_io(
- struct scic_sds_controller *scic,
- struct scic_sds_remote_device *rdev,
- struct scic_sds_request *request)
-{
- enum sci_status status;
- u16 index;
-
- switch (scic->state_machine.current_state_id) {
- case SCI_BASE_CONTROLLER_STATE_STOPPING:
- /* XXX: Implement this function */
- return SCI_FAILURE;
- case SCI_BASE_CONTROLLER_STATE_READY:
- status = scic_sds_remote_device_complete_io(scic, rdev, request);
- if (status != SCI_SUCCESS)
- return status;
-
- index = scic_sds_io_tag_get_index(request->io_tag);
- scic->io_request_table[index] = NULL;
- return SCI_SUCCESS;
- default:
- dev_warn(scic_to_dev(scic), "invalid state to complete I/O");
- return SCI_FAILURE_INVALID_STATE;
- }
-
-}
-
-enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req)
-{
- struct scic_sds_controller *scic = sci_req->owning_controller;
-
- if (scic->state_machine.current_state_id !=
- SCI_BASE_CONTROLLER_STATE_READY) {
- dev_warn(scic_to_dev(scic), "invalid state to continue I/O");
- return SCI_FAILURE_INVALID_STATE;
- }
-
- scic->io_request_table[scic_sds_io_tag_get_index(sci_req->io_tag)] = sci_req;
- scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(sci_req));
- return SCI_SUCCESS;
-}
-
-/**
- * scic_controller_start_task() - This method is called by the SCIC user to
- * send/start a framework task management request.
- * @controller: the handle to the controller object for which to start the task
- * management request.
- * @remote_device: the handle to the remote device object for which to start
- * the task management request.
- * @task_request: the handle to the task request object to start.
- * @io_tag: This parameter specifies a previously allocated IO tag that the
- * user desires to be utilized for this request. Note this not the io_tag
- * of the request being managed. It is to be utilized for the task request
- * itself. This parameter is optional. The user is allowed to supply
- * SCI_CONTROLLER_INVALID_IO_TAG as the value for this parameter.
- *
- * - IO tags are a protected resource. It is incumbent upon the SCI Core user
- * to ensure that each of the methods that may allocate or free available IO
- * tags are handled in a mutually exclusive manner. This method is one of said
- * methods requiring proper critical code section protection (e.g. semaphore,
- * spin-lock, etc.). - The user must synchronize this task with completion
- * queue processing. If they are not synchronized then it is possible for the
- * io requests that are being managed by the task request can complete before
- * starting the task request. scic_controller_allocate_tag() for more
- * information on allocating a tag. Indicate if the controller successfully
- * started the IO request. SCI_TASK_SUCCESS if the task request was
- * successfully started. SCI_TASK_FAILURE_REQUIRES_SCSI_ABORT This value is
- * returned if there is/are task(s) outstanding that require termination or
- * completion before this request can succeed.
- */
-enum sci_task_status scic_controller_start_task(
- struct scic_sds_controller *scic,
- struct scic_sds_remote_device *rdev,
- struct scic_sds_request *req,
- u16 task_tag)
-{
- enum sci_status status;
-
- if (scic->state_machine.current_state_id !=
- SCI_BASE_CONTROLLER_STATE_READY) {
- dev_warn(scic_to_dev(scic),
- "%s: SCIC Controller starting task from invalid "
- "state\n",
- __func__);
- return SCI_TASK_FAILURE_INVALID_STATE;
- }
-
- status = scic_sds_remote_device_start_task(scic, rdev, req);
- switch (status) {
- case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS:
- scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req;
-
- /*
- * We will let framework know this task request started successfully,
- * although core is still woring on starting the request (to post tc when
- * RNC is resumed.)
- */
- return SCI_SUCCESS;
- case SCI_SUCCESS:
- scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req;
-
- scic_sds_controller_post_request(scic,
- scic_sds_request_get_post_context(req));
- break;
- default:
- break;
- }
-
- return status;
-}
-
-/**
- * scic_controller_allocate_io_tag() - This method will allocate a tag from the
- * pool of free IO tags. Direct allocation of IO tags by the SCI Core user
- * is optional. The scic_controller_start_io() method will allocate an IO
- * tag if this method is not utilized and the tag is not supplied to the IO
- * construct routine. Direct allocation of IO tags may provide additional
- * performance improvements in environments capable of supporting this usage
- * model. Additionally, direct allocation of IO tags also provides
- * additional flexibility to the SCI Core user. Specifically, the user may
- * retain IO tags across the lives of multiple IO requests.
- * @controller: the handle to the controller object for which to allocate the
- * tag.
- *
- * IO tags are a protected resource. It is incumbent upon the SCI Core user to
- * ensure that each of the methods that may allocate or free available IO tags
- * are handled in a mutually exclusive manner. This method is one of said
- * methods requiring proper critical code section protection (e.g. semaphore,
- * spin-lock, etc.). An unsigned integer representing an available IO tag.
- * SCI_CONTROLLER_INVALID_IO_TAG This value is returned if there are no
- * currently available tags to be allocated. All return other values indicate a
- * legitimate tag.
- */
-u16 scic_controller_allocate_io_tag(
- struct scic_sds_controller *scic)
-{
- u16 task_context;
- u16 sequence_count;
-
- if (!sci_pool_empty(scic->tci_pool)) {
- sci_pool_get(scic->tci_pool, task_context);
-
- sequence_count = scic->io_request_sequence[task_context];
-
- return scic_sds_io_tag_construct(sequence_count, task_context);
- }
-
- return SCI_CONTROLLER_INVALID_IO_TAG;
-}
-
-/**
- * scic_controller_free_io_tag() - This method will free an IO tag to the pool
- * of free IO tags. This method provides the SCI Core user more flexibility
- * with regards to IO tags. The user may desire to keep an IO tag after an
- * IO request has completed, because they plan on re-using the tag for a
- * subsequent IO request. This method is only legal if the tag was
- * allocated via scic_controller_allocate_io_tag().
- * @controller: This parameter specifies the handle to the controller object
- * for which to free/return the tag.
- * @io_tag: This parameter represents the tag to be freed to the pool of
- * available tags.
- *
- * - IO tags are a protected resource. It is incumbent upon the SCI Core user
- * to ensure that each of the methods that may allocate or free available IO
- * tags are handled in a mutually exclusive manner. This method is one of said
- * methods requiring proper critical code section protection (e.g. semaphore,
- * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI
- * Core user, using the scic_controller_allocate_io_tag() method, then it is
- * the responsibility of the caller to invoke this method to free the tag. This
- * method returns an indication of whether the tag was successfully put back
- * (freed) to the pool of available tags. SCI_SUCCESS This return value
- * indicates the tag was successfully placed into the pool of available IO
- * tags. SCI_FAILURE_INVALID_IO_TAG This value is returned if the supplied tag
- * is not a valid IO tag value.
- */
-enum sci_status scic_controller_free_io_tag(
- struct scic_sds_controller *scic,
- u16 io_tag)
-{
- u16 sequence;
- u16 index;
-
- BUG_ON(io_tag == SCI_CONTROLLER_INVALID_IO_TAG);
-
- sequence = scic_sds_io_tag_get_sequence(io_tag);
- index = scic_sds_io_tag_get_index(io_tag);
-
- if (!sci_pool_full(scic->tci_pool)) {
- if (sequence == scic->io_request_sequence[index]) {
- scic_sds_io_sequence_increment(
- scic->io_request_sequence[index]);
-
- sci_pool_put(scic->tci_pool, index);
-
- return SCI_SUCCESS;
- }
- }
-
- return SCI_FAILURE_INVALID_IO_TAG;
-}
-
-void scic_controller_enable_interrupts(
- struct scic_sds_controller *scic)
-{
- BUG_ON(scic->smu_registers == NULL);
- writel(0, &scic->smu_registers->interrupt_mask);
-}
-
-void scic_controller_disable_interrupts(
- struct scic_sds_controller *scic)
-{
- BUG_ON(scic->smu_registers == NULL);
- writel(0xffffffff, &scic->smu_registers->interrupt_mask);
-}
-
-static enum sci_status scic_controller_set_mode(
- struct scic_sds_controller *scic,
- enum sci_controller_mode operating_mode)
-{
- enum sci_status status = SCI_SUCCESS;
-
- if ((scic->state_machine.current_state_id ==
- SCI_BASE_CONTROLLER_STATE_INITIALIZING) ||
- (scic->state_machine.current_state_id ==
- SCI_BASE_CONTROLLER_STATE_INITIALIZED)) {
- switch (operating_mode) {
- case SCI_MODE_SPEED:
- scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES;
- scic->task_context_entries = SCU_IO_REQUEST_COUNT;
- scic->uf_control.buffers.count =
- SCU_UNSOLICITED_FRAME_COUNT;
- scic->completion_event_entries = SCU_EVENT_COUNT;
- scic->completion_queue_entries =
- SCU_COMPLETION_QUEUE_COUNT;
- break;
-
- case SCI_MODE_SIZE:
- scic->remote_node_entries = SCI_MIN_REMOTE_DEVICES;
- scic->task_context_entries = SCI_MIN_IO_REQUESTS;
- scic->uf_control.buffers.count =
- SCU_MIN_UNSOLICITED_FRAMES;
- scic->completion_event_entries = SCU_MIN_EVENTS;
- scic->completion_queue_entries =
- SCU_MIN_COMPLETION_QUEUE_ENTRIES;
- break;
-
- default:
- status = SCI_FAILURE_INVALID_PARAMETER_VALUE;
- break;
- }
- } else
- status = SCI_FAILURE_INVALID_STATE;
-
- return status;
-}
-
-/**
- * scic_sds_controller_reset_hardware() -
- *
- * This method will reset the controller hardware.
- */
-static void scic_sds_controller_reset_hardware(
- struct scic_sds_controller *scic)
-{
- /* Disable interrupts so we dont take any spurious interrupts */
- scic_controller_disable_interrupts(scic);
-
- /* Reset the SCU */
- writel(0xFFFFFFFF, &scic->smu_registers->soft_reset_control);
-
- /* Delay for 1ms to before clearing the CQP and UFQPR. */
- udelay(1000);
-
- /* The write to the CQGR clears the CQP */
- writel(0x00000000, &scic->smu_registers->completion_queue_get);
-
- /* The write to the UFQGP clears the UFQPR */
- writel(0, &scic->scu_registers->sdma.unsolicited_frame_get_pointer);
-}
-
-enum sci_status scic_user_parameters_set(
- struct scic_sds_controller *scic,
- union scic_user_parameters *scic_parms)
-{
- u32 state = scic->state_machine.current_state_id;
-
- if (state == SCI_BASE_CONTROLLER_STATE_RESET ||
- state == SCI_BASE_CONTROLLER_STATE_INITIALIZING ||
- state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) {
- u16 index;
-
- /*
- * Validate the user parameters. If they are not legal, then
- * return a failure.
- */
- for (index = 0; index < SCI_MAX_PHYS; index++) {
- struct sci_phy_user_params *user_phy;
-
- user_phy = &scic_parms->sds1.phys[index];
-
- if (!((user_phy->max_speed_generation <=
- SCIC_SDS_PARM_MAX_SPEED) &&
- (user_phy->max_speed_generation >
- SCIC_SDS_PARM_NO_SPEED)))
- return SCI_FAILURE_INVALID_PARAMETER_VALUE;
-
- if (user_phy->in_connection_align_insertion_frequency <
- 3)
- return SCI_FAILURE_INVALID_PARAMETER_VALUE;
-
- if ((user_phy->in_connection_align_insertion_frequency <
- 3) ||
- (user_phy->align_insertion_frequency == 0) ||
- (user_phy->
- notify_enable_spin_up_insertion_frequency ==
- 0))
- return SCI_FAILURE_INVALID_PARAMETER_VALUE;
- }
-
- if ((scic_parms->sds1.stp_inactivity_timeout == 0) ||
- (scic_parms->sds1.ssp_inactivity_timeout == 0) ||
- (scic_parms->sds1.stp_max_occupancy_timeout == 0) ||
- (scic_parms->sds1.ssp_max_occupancy_timeout == 0) ||
- (scic_parms->sds1.no_outbound_task_timeout == 0))
- return SCI_FAILURE_INVALID_PARAMETER_VALUE;
-
- memcpy(&scic->user_parameters, scic_parms, sizeof(*scic_parms));
-
- return SCI_SUCCESS;
- }
-
- return SCI_FAILURE_INVALID_STATE;
-}
-
-int scic_oem_parameters_validate(struct scic_sds_oem_params *oem)
-{
- int i;
-
- for (i = 0; i < SCI_MAX_PORTS; i++)
- if (oem->ports[i].phy_mask > SCIC_SDS_PARM_PHY_MASK_MAX)
- return -EINVAL;
-
- for (i = 0; i < SCI_MAX_PHYS; i++)
- if (oem->phys[i].sas_address.high == 0 &&
- oem->phys[i].sas_address.low == 0)
- return -EINVAL;
-
- if (oem->controller.mode_type == SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) {
- for (i = 0; i < SCI_MAX_PHYS; i++)
- if (oem->ports[i].phy_mask != 0)
- return -EINVAL;
- } else if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) {
- u8 phy_mask = 0;
-
- for (i = 0; i < SCI_MAX_PHYS; i++)
- phy_mask |= oem->ports[i].phy_mask;
-
- if (phy_mask == 0)
- return -EINVAL;
- } else
- return -EINVAL;
-
- if (oem->controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT)
- return -EINVAL;
-
- return 0;
-}
-
-enum sci_status scic_oem_parameters_set(struct scic_sds_controller *scic,
- union scic_oem_parameters *scic_parms)
-{
- u32 state = scic->state_machine.current_state_id;
-
- if (state == SCI_BASE_CONTROLLER_STATE_RESET ||
- state == SCI_BASE_CONTROLLER_STATE_INITIALIZING ||
- state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) {
-
- if (scic_oem_parameters_validate(&scic_parms->sds1))
- return SCI_FAILURE_INVALID_PARAMETER_VALUE;
- scic->oem_parameters.sds1 = scic_parms->sds1;
-
- return SCI_SUCCESS;
- }
-
- return SCI_FAILURE_INVALID_STATE;
-}
-
-void scic_oem_parameters_get(
- struct scic_sds_controller *scic,
- union scic_oem_parameters *scic_parms)
-{
- memcpy(scic_parms, (&scic->oem_parameters), sizeof(*scic_parms));
-}
-
-#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS 853
-#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS 1280
-#define INTERRUPT_COALESCE_TIMEOUT_MAX_US 2700000
-#define INTERRUPT_COALESCE_NUMBER_MAX 256
-#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN 7
-#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX 28
-
-/**
- * scic_controller_set_interrupt_coalescence() - This method allows the user to
- * configure the interrupt coalescence.
- * @controller: This parameter represents the handle to the controller object
- * for which its interrupt coalesce register is overridden.
- * @coalesce_number: Used to control the number of entries in the Completion
- * Queue before an interrupt is generated. If the number of entries exceed
- * this number, an interrupt will be generated. The valid range of the input
- * is [0, 256]. A setting of 0 results in coalescing being disabled.
- * @coalesce_timeout: Timeout value in microseconds. The valid range of the
- * input is [0, 2700000] . A setting of 0 is allowed and results in no
- * interrupt coalescing timeout.
- *
- * Indicate if the user successfully set the interrupt coalesce parameters.
- * SCI_SUCCESS The user successfully updated the interrutp coalescence.
- * SCI_FAILURE_INVALID_PARAMETER_VALUE The user input value is out of range.
- */
-static enum sci_status scic_controller_set_interrupt_coalescence(
- struct scic_sds_controller *scic_controller,
- u32 coalesce_number,
- u32 coalesce_timeout)
-{
- u8 timeout_encode = 0;
- u32 min = 0;
- u32 max = 0;
-
- /* Check if the input parameters fall in the range. */
- if (coalesce_number > INTERRUPT_COALESCE_NUMBER_MAX)
- return SCI_FAILURE_INVALID_PARAMETER_VALUE;
-
- /*
- * Defined encoding for interrupt coalescing timeout:
- * Value Min Max Units
- * ----- --- --- -----
- * 0 - - Disabled
- * 1 13.3 20.0 ns
- * 2 26.7 40.0
- * 3 53.3 80.0
- * 4 106.7 160.0
- * 5 213.3 320.0
- * 6 426.7 640.0
- * 7 853.3 1280.0
- * 8 1.7 2.6 us
- * 9 3.4 5.1
- * 10 6.8 10.2
- * 11 13.7 20.5
- * 12 27.3 41.0
- * 13 54.6 81.9
- * 14 109.2 163.8
- * 15 218.5 327.7
- * 16 436.9 655.4
- * 17 873.8 1310.7
- * 18 1.7 2.6 ms
- * 19 3.5 5.2
- * 20 7.0 10.5
- * 21 14.0 21.0
- * 22 28.0 41.9
- * 23 55.9 83.9
- * 24 111.8 167.8
- * 25 223.7 335.5
- * 26 447.4 671.1
- * 27 894.8 1342.2
- * 28 1.8 2.7 s
- * Others Undefined */
-
- /*
- * Use the table above to decide the encode of interrupt coalescing timeout
- * value for register writing. */
- if (coalesce_timeout == 0)
- timeout_encode = 0;
- else{
- /* make the timeout value in unit of (10 ns). */
- coalesce_timeout = coalesce_timeout * 100;
- min = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS / 10;
- max = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS / 10;
-
- /* get the encode of timeout for register writing. */
- for (timeout_encode = INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN;
- timeout_encode <= INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX;
- timeout_encode++) {
- if (min <= coalesce_timeout && max > coalesce_timeout)
- break;
- else if (coalesce_timeout >= max && coalesce_timeout < min * 2
- && coalesce_timeout <= INTERRUPT_COALESCE_TIMEOUT_MAX_US * 100) {
- if ((coalesce_timeout - max) < (2 * min - coalesce_timeout))
- break;
- else{
- timeout_encode++;
- break;
- }
- } else {
- max = max * 2;
- min = min * 2;
- }
- }
-
- if (timeout_encode == INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX + 1)
- /* the value is out of range. */
- return SCI_FAILURE_INVALID_PARAMETER_VALUE;
- }
-
- writel(SMU_ICC_GEN_VAL(NUMBER, coalesce_number) |
- SMU_ICC_GEN_VAL(TIMER, timeout_encode),
- &scic_controller->smu_registers->interrupt_coalesce_control);
-
-
- scic_controller->interrupt_coalesce_number = (u16)coalesce_number;
- scic_controller->interrupt_coalesce_timeout = coalesce_timeout / 100;
-
- return SCI_SUCCESS;
-}
-
-
-
-enum sci_status scic_controller_initialize(struct scic_sds_controller *scic)
-{
- struct sci_base_state_machine *sm = &scic->state_machine;
- enum sci_status result = SCI_SUCCESS;
- struct isci_host *ihost = scic_to_ihost(scic);
- u32 index, state;
-
- if (scic->state_machine.current_state_id !=
- SCI_BASE_CONTROLLER_STATE_RESET) {
- dev_warn(scic_to_dev(scic),
- "SCIC Controller initialize operation requested "
- "in invalid state\n");
- return SCI_FAILURE_INVALID_STATE;
- }
-
- sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_INITIALIZING);
-
- scic->timeout_timer = isci_timer_create(ihost,
- scic,
- scic_sds_controller_timeout_handler);
-
- scic_sds_controller_initialize_phy_startup(scic);
-
- scic_sds_controller_initialize_power_control(scic);
-
- /*
- * There is nothing to do here for B0 since we do not have to
- * program the AFE registers.
- * / @todo The AFE settings are supposed to be correct for the B0 but
- * / presently they seem to be wrong. */
- scic_sds_controller_afe_initialization(scic);
-
- if (result == SCI_SUCCESS) {
- u32 status;
- u32 terminate_loop;
-
- /* Take the hardware out of reset */
- writel(0, &scic->smu_registers->soft_reset_control);
-
- /*
- * / @todo Provide meaningfull error code for hardware failure
- * result = SCI_FAILURE_CONTROLLER_HARDWARE; */
- result = SCI_FAILURE;
- terminate_loop = 100;
-
- while (terminate_loop-- && (result != SCI_SUCCESS)) {
- /* Loop until the hardware reports success */
- udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME);
- status = readl(&scic->smu_registers->control_status);
-
- if ((status & SCU_RAM_INIT_COMPLETED) ==
- SCU_RAM_INIT_COMPLETED)
- result = SCI_SUCCESS;
- }
- }
-
- if (result == SCI_SUCCESS) {
- u32 max_supported_ports;
- u32 max_supported_devices;
- u32 max_supported_io_requests;
- u32 device_context_capacity;
-
- /*
- * Determine what are the actaul device capacities that the
- * hardware will support */
- device_context_capacity =
- readl(&scic->smu_registers->device_context_capacity);
-
-
- max_supported_ports = smu_dcc_get_max_ports(device_context_capacity);
- max_supported_devices = smu_dcc_get_max_remote_node_context(device_context_capacity);
- max_supported_io_requests = smu_dcc_get_max_task_context(device_context_capacity);
-
- /*
- * Make all PEs that are unassigned match up with the
- * logical ports
- */
- for (index = 0; index < max_supported_ports; index++) {
- struct scu_port_task_scheduler_group_registers __iomem
- *ptsg = &scic->scu_registers->peg0.ptsg;
-
- writel(index, &ptsg->protocol_engine[index]);
- }
-
- /* Record the smaller of the two capacity values */
- scic->logical_port_entries =
- min(max_supported_ports, scic->logical_port_entries);
-
- scic->task_context_entries =
- min(max_supported_io_requests,
- scic->task_context_entries);
-
- scic->remote_node_entries =
- min(max_supported_devices, scic->remote_node_entries);
-
- /*
- * Now that we have the correct hardware reported minimum values
- * build the MDL for the controller. Default to a performance
- * configuration.
- */
- scic_controller_set_mode(scic, SCI_MODE_SPEED);
- }
-
- /* Initialize hardware PCI Relaxed ordering in DMA engines */
- if (result == SCI_SUCCESS) {
- u32 dma_configuration;
-
- /* Configure the payload DMA */
- dma_configuration =
- readl(&scic->scu_registers->sdma.pdma_configuration);
- dma_configuration |=
- SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE);
- writel(dma_configuration,
- &scic->scu_registers->sdma.pdma_configuration);
-
- /* Configure the control DMA */
- dma_configuration =
- readl(&scic->scu_registers->sdma.cdma_configuration);
- dma_configuration |=
- SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE);
- writel(dma_configuration,
- &scic->scu_registers->sdma.cdma_configuration);
- }
-
- /*
- * Initialize the PHYs before the PORTs because the PHY registers
- * are accessed during the port initialization.
- */
- if (result == SCI_SUCCESS) {
- /* Initialize the phys */
- for (index = 0;
- (result == SCI_SUCCESS) && (index < SCI_MAX_PHYS);
- index++) {
- result = scic_sds_phy_initialize(
- &ihost->phys[index].sci,
- &scic->scu_registers->peg0.pe[index].tl,
- &scic->scu_registers->peg0.pe[index].ll);
- }
- }
-
- if (result == SCI_SUCCESS) {
- /* Initialize the logical ports */
- for (index = 0;
- (index < scic->logical_port_entries) &&
- (result == SCI_SUCCESS);
- index++) {
- result = scic_sds_port_initialize(
- &ihost->ports[index].sci,
- &scic->scu_registers->peg0.ptsg.port[index],
- &scic->scu_registers->peg0.ptsg.protocol_engine,
- &scic->scu_registers->peg0.viit[index]);
- }
- }
-
- if (result == SCI_SUCCESS)
- result = scic_sds_port_configuration_agent_initialize(
- scic,
- &scic->port_agent);
-
- /* Advance the controller state machine */
- if (result == SCI_SUCCESS)
- state = SCI_BASE_CONTROLLER_STATE_INITIALIZED;
- else
- state = SCI_BASE_CONTROLLER_STATE_FAILED;
- sci_base_state_machine_change_state(sm, state);
-
- return result;
-}
-
-enum sci_status scic_controller_start(struct scic_sds_controller *scic,
- u32 timeout)
-{
- struct isci_host *ihost = scic_to_ihost(scic);
- enum sci_status result;
- u16 index;
-
- if (scic->state_machine.current_state_id !=
- SCI_BASE_CONTROLLER_STATE_INITIALIZED) {
- dev_warn(scic_to_dev(scic),
- "SCIC Controller start operation requested in "
- "invalid state\n");
- return SCI_FAILURE_INVALID_STATE;
- }
-
- /* Build the TCi free pool */
- sci_pool_initialize(scic->tci_pool);
- for (index = 0; index < scic->task_context_entries; index++)
- sci_pool_put(scic->tci_pool, index);
-
- /* Build the RNi free pool */
- scic_sds_remote_node_table_initialize(
- &scic->available_remote_nodes,
- scic->remote_node_entries);
-
- /*
- * Before anything else lets make sure we will not be
- * interrupted by the hardware.
- */
- scic_controller_disable_interrupts(scic);
-
- /* Enable the port task scheduler */
- scic_sds_controller_enable_port_task_scheduler(scic);
-
- /* Assign all the task entries to scic physical function */
- scic_sds_controller_assign_task_entries(scic);
-
- /* Now initialize the completion queue */
- scic_sds_controller_initialize_completion_queue(scic);
-
- /* Initialize the unsolicited frame queue for use */
- scic_sds_controller_initialize_unsolicited_frame_queue(scic);
-
- /* Start all of the ports on this controller */
- for (index = 0; index < scic->logical_port_entries; index++) {
- struct scic_sds_port *sci_port = &ihost->ports[index].sci;
-
- result = sci_port->state_handlers->start_handler(sci_port);
- if (result)
- return result;
- }
-
- scic_sds_controller_start_next_phy(scic);
-
- isci_timer_start(scic->timeout_timer, timeout);
-
- sci_base_state_machine_change_state(&scic->state_machine,
- SCI_BASE_CONTROLLER_STATE_STARTING);
-
- return SCI_SUCCESS;
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_controller
- * object.
- *
- * This method implements the actions taken by the struct scic_sds_controller on entry
- * to the SCI_BASE_CONTROLLER_STATE_INITIAL. - Set the state handlers to the
- * controllers initial state. none This function should initialize the
- * controller object.
- */
-static void scic_sds_controller_initial_state_enter(void *object)
-{
- struct scic_sds_controller *scic = object;
-
- sci_base_state_machine_change_state(&scic->state_machine,
- SCI_BASE_CONTROLLER_STATE_RESET);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_controller
- * object.
- *
- * This method implements the actions taken by the struct scic_sds_controller on exit
- * from the SCI_BASE_CONTROLLER_STATE_STARTING. - This function stops the
- * controller starting timeout timer. none
- */
-static inline void scic_sds_controller_starting_state_exit(void *object)
-{
- struct scic_sds_controller *scic = object;
-
- isci_timer_stop(scic->timeout_timer);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_controller
- * object.
- *
- * This method implements the actions taken by the struct scic_sds_controller on entry
- * to the SCI_BASE_CONTROLLER_STATE_READY. - Set the state handlers to the
- * controllers ready state. none
- */
-static void scic_sds_controller_ready_state_enter(void *object)
-{
- struct scic_sds_controller *scic = object;
-
- /* set the default interrupt coalescence number and timeout value. */
- scic_controller_set_interrupt_coalescence(
- scic, 0x10, 250);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_controller
- * object.
- *
- * This method implements the actions taken by the struct scic_sds_controller on exit
- * from the SCI_BASE_CONTROLLER_STATE_READY. - This function does nothing. none
- */
-static void scic_sds_controller_ready_state_exit(void *object)
-{
- struct scic_sds_controller *scic = object;
-
- /* disable interrupt coalescence. */
- scic_controller_set_interrupt_coalescence(scic, 0, 0);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct scic_sds_controller
- * object.
- *
- * This method implements the actions taken by the struct scic_sds_controller on entry
- * to the SCI_BASE_CONTROLLER_STATE_READY. - Set the state handlers to the
- * controllers ready state. - Stop the phys on this controller - Stop the ports
- * on this controller - Stop all of the remote devices on this controller none
- */
-static void scic_sds_controller_stopping_state_enter(void *object)
-{
- struct scic_sds_controller *scic = object;
-
- /* Stop all of the components for this controller */
- scic_sds_controller_stop_phys(scic);
- scic_sds_controller_stop_ports(scic);
- scic_sds_controller_stop_devices(scic);
-}
-
-/**
- *
- * @object: This is the object which is cast to a struct
- * scic_sds_controller object.
- *
- * This function implements the actions taken by the struct scic_sds_controller
- * on exit from the SCI_BASE_CONTROLLER_STATE_STOPPING. -
- * This function stops the controller stopping timeout timer.
- */
-static inline void scic_sds_controller_stopping_state_exit(void *object)
-{
- struct scic_sds_controller *scic = object;
-
- isci_timer_stop(scic->timeout_timer);
-}
-
-static void scic_sds_controller_resetting_state_enter(void *object)
-{
- struct scic_sds_controller *scic = object;
-
- scic_sds_controller_reset_hardware(scic);
- sci_base_state_machine_change_state(&scic->state_machine,
- SCI_BASE_CONTROLLER_STATE_RESET);
-}
-
-static const struct sci_base_state scic_sds_controller_state_table[] = {
- [SCI_BASE_CONTROLLER_STATE_INITIAL] = {
- .enter_state = scic_sds_controller_initial_state_enter,
- },
- [SCI_BASE_CONTROLLER_STATE_RESET] = {},
- [SCI_BASE_CONTROLLER_STATE_INITIALIZING] = {},
- [SCI_BASE_CONTROLLER_STATE_INITIALIZED] = {},
- [SCI_BASE_CONTROLLER_STATE_STARTING] = {
- .exit_state = scic_sds_controller_starting_state_exit,
- },
- [SCI_BASE_CONTROLLER_STATE_READY] = {
- .enter_state = scic_sds_controller_ready_state_enter,
- .exit_state = scic_sds_controller_ready_state_exit,
- },
- [SCI_BASE_CONTROLLER_STATE_RESETTING] = {
- .enter_state = scic_sds_controller_resetting_state_enter,
- },
- [SCI_BASE_CONTROLLER_STATE_STOPPING] = {
- .enter_state = scic_sds_controller_stopping_state_enter,
- .exit_state = scic_sds_controller_stopping_state_exit,
- },
- [SCI_BASE_CONTROLLER_STATE_STOPPED] = {},
- [SCI_BASE_CONTROLLER_STATE_FAILED] = {}
-};
-
-/**
- * scic_controller_construct() - This method will attempt to construct a
- * controller object utilizing the supplied parameter information.
- * @c: This parameter specifies the controller to be constructed.
- * @scu_base: mapped base address of the scu registers
- * @smu_base: mapped base address of the smu registers
- *
- * Indicate if the controller was successfully constructed or if it failed in
- * some way. SCI_SUCCESS This value is returned if the controller was
- * successfully constructed. SCI_WARNING_TIMER_CONFLICT This value is returned
- * if the interrupt coalescence timer may cause SAS compliance issues for SMP
- * Target mode response processing. SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE
- * This value is returned if the controller does not support the supplied type.
- * SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION This value is returned if the
- * controller does not support the supplied initialization data version.
- */
-enum sci_status scic_controller_construct(struct scic_sds_controller *scic,
- void __iomem *scu_base,
- void __iomem *smu_base)
-{
- struct isci_host *ihost = scic_to_ihost(scic);
- u8 i;
-
- sci_base_state_machine_construct(&scic->state_machine,
- scic, scic_sds_controller_state_table,
- SCI_BASE_CONTROLLER_STATE_INITIAL);
-
- sci_base_state_machine_start(&scic->state_machine);
-
- scic->scu_registers = scu_base;
- scic->smu_registers = smu_base;
-
- scic_sds_port_configuration_agent_construct(&scic->port_agent);
-
- /* Construct the ports for this controller */
- for (i = 0; i < SCI_MAX_PORTS; i++)
- scic_sds_port_construct(&ihost->ports[i].sci, i, scic);
- scic_sds_port_construct(&ihost->ports[i].sci, SCIC_SDS_DUMMY_PORT, scic);
-
- /* Construct the phys for this controller */
- for (i = 0; i < SCI_MAX_PHYS; i++) {
- /* Add all the PHYs to the dummy port */
- scic_sds_phy_construct(&ihost->phys[i].sci,
- &ihost->ports[SCI_MAX_PORTS].sci, i);
- }
-
- scic->invalid_phy_mask = 0;
-
- /* Set the default maximum values */
- scic->completion_event_entries = SCU_EVENT_COUNT;
- scic->completion_queue_entries = SCU_COMPLETION_QUEUE_COUNT;
- scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES;
- scic->logical_port_entries = SCI_MAX_PORTS;
- scic->task_context_entries = SCU_IO_REQUEST_COUNT;
- scic->uf_control.buffers.count = SCU_UNSOLICITED_FRAME_COUNT;
- scic->uf_control.address_table.count = SCU_UNSOLICITED_FRAME_COUNT;
-
- /* Initialize the User and OEM parameters to default values. */
- scic_sds_controller_set_default_config_parameters(scic);
-
- return scic_controller_reset(scic);
-}
diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h
deleted file mode 100644
index 5c00f9688c18..000000000000
--- a/drivers/scsi/isci/core/scic_sds_controller.h
+++ /dev/null
@@ -1,576 +0,0 @@
-/*
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _SCIC_SDS_CONTROLLER_H_
-#define _SCIC_SDS_CONTROLLER_H_
-
-#include <linux/string.h>
-#include <linux/io.h>
-
-/**
- * This file contains the structures, constants and prototypes used for the
- * core controller object.
- *
- *
- */
-
-#include "sci_pool.h"
-#include "sci_base_state.h"
-#include "sci_base_state_machine.h"
-#include "scic_config_parameters.h"
-#include "scic_sds_port.h"
-#include "scic_sds_phy.h"
-#include "remote_node_table.h"
-#include "remote_device.h"
-#include "scu_registers.h"
-#include "scu_task_context.h"
-#include "scu_unsolicited_frame.h"
-#include "scic_sds_unsolicited_frame_control.h"
-#include "scic_sds_port_configuration_agent.h"
-
-struct sci_base_remote_device;
-struct scic_sds_remote_device;
-struct scic_sds_request;
-struct scic_sds_controller;
-
-/**
- * struct scic_power_control -
- *
- * This structure defines the fields for managing power control for direct
- * attached disk devices.
- */
-struct scic_power_control {
- /**
- * This field is set when the power control timer is running and cleared when
- * it is not.
- */
- bool timer_started;
-
- /**
- * This field is the handle to the driver timer object. This timer is used to
- * control when the directed attached disks can consume power.
- */
- void *timer;
-
- /**
- * This field is used to keep track of how many phys are put into the
- * requesters field.
- */
- u8 phys_waiting;
-
- /**
- * This field is used to keep track of how many phys have been granted to consume power
- */
- u8 phys_granted_power;
-
- /**
- * This field is an array of phys that we are waiting on. The phys are direct
- * mapped into requesters via struct scic_sds_phy.phy_index
- */
- struct scic_sds_phy *requesters[SCI_MAX_PHYS];
-
-};
-
-/**
- * struct scic_sds_controller -
- *
- * This structure represents the SCU controller object.
- */
-struct scic_sds_controller {
- /**
- * This field contains the information for the base controller state
- * machine.
- */
- struct sci_base_state_machine state_machine;
-
- /**
- * This field is the driver timer object handler used to time the controller
- * object start and stop requests.
- */
- void *timeout_timer;
-
- /**
- * This field contains the user parameters to be utilized for this
- * core controller object.
- */
- union scic_user_parameters user_parameters;
-
- /**
- * This field contains the OEM parameters to be utilized for this
- * core controller object.
- */
- union scic_oem_parameters oem_parameters;
-
- /**
- * This field contains the port configuration agent for this controller.
- */
- struct scic_sds_port_configuration_agent port_agent;
-
- /**
- * This field is the array of device objects that are currently constructed
- * for this controller object. This table is used as a fast lookup of device
- * objects that need to handle device completion notifications from the
- * hardware. The table is RNi based.
- */
- struct scic_sds_remote_device *device_table[SCI_MAX_REMOTE_DEVICES];
-
- /**
- * This field is the array of IO request objects that are currently active for
- * this controller object. This table is used as a fast lookup of the io
- * request object that need to handle completion queue notifications. The
- * table is TCi based.
- */
- struct scic_sds_request *io_request_table[SCI_MAX_IO_REQUESTS];
-
- /**
- * This field is the free RNi data structure
- */
- struct scic_remote_node_table available_remote_nodes;
-
- /**
- * This field is the TCi pool used to manage the task context index.
- */
- SCI_POOL_CREATE(tci_pool, u16, SCI_MAX_IO_REQUESTS);
-
- /**
- * This filed is the struct scic_power_control data used to controll when direct
- * attached devices can consume power.
- */
- struct scic_power_control power_control;
-
- /**
- * This field is the array of sequence values for the IO Tag fields. Even
- * though only 4 bits of the field is used for the sequence the sequence is 16
- * bits in size so the sequence can be bitwise or'd with the TCi to build the
- * IO Tag value.
- */
- u16 io_request_sequence[SCI_MAX_IO_REQUESTS];
-
- /**
- * This field in the array of sequence values for the RNi. These are used
- * to control io request build to io request start operations. The sequence
- * value is recorded into an io request when it is built and is checked on
- * the io request start operation to make sure that there was not a device
- * hot plug between the build and start operation.
- */
- u8 remote_device_sequence[SCI_MAX_REMOTE_DEVICES];
-
- /**
- * This field is a pointer to the memory allocated by the driver for the task
- * context table. This data is shared between the hardware and software.
- */
- struct scu_task_context *task_context_table;
-
- /**
- * This field is a pointer to the memory allocated by the driver for the
- * remote node context table. This table is shared between the hardware and
- * software.
- */
- union scu_remote_node_context *remote_node_context_table;
-
- /**
- * This field is a pointer to the completion queue. This memory is
- * written to by the hardware and read by the software.
- */
- u32 *completion_queue;
-
- /**
- * This field is the software copy of the completion queue get pointer. The
- * controller object writes this value to the hardware after processing the
- * completion entries.
- */
- u32 completion_queue_get;
-
- /**
- * This field is the minimum of the number of hardware supported port entries
- * and the software requested port entries.
- */
- u32 logical_port_entries;
-
- /**
- * This field is the minimum number of hardware supported completion queue
- * entries and the software requested completion queue entries.
- */
- u32 completion_queue_entries;
-
- /**
- * This field is the minimum number of hardware supported event entries and
- * the software requested event entries.
- */
- u32 completion_event_entries;
-
- /**
- * This field is the minimum number of devices supported by the hardware and
- * the number of devices requested by the software.
- */
- u32 remote_node_entries;
-
- /**
- * This field is the minimum number of IO requests supported by the hardware
- * and the number of IO requests requested by the software.
- */
- u32 task_context_entries;
-
- /**
- * This object contains all of the unsolicited frame specific
- * data utilized by the core controller.
- */
- struct scic_sds_unsolicited_frame_control uf_control;
-
- /* Phy Startup Data */
- /**
- * This field is the driver timer handle for controller phy request startup.
- * On controller start the controller will start each PHY individually in
- * order of phy index.
- */
- void *phy_startup_timer;
-
- /**
- * This field is set when the phy_startup_timer is running and is cleared when
- * the phy_startup_timer is stopped.
- */
- bool phy_startup_timer_pending;
-
- /**
- * This field is the index of the next phy start. It is initialized to 0 and
- * increments for each phy index that is started.
- */
- u32 next_phy_to_start;
-
- /**
- * This field controlls the invalid link up notifications to the SCI_USER. If
- * an invalid_link_up notification is reported a bit for the PHY index is set
- * so further notifications are not made. Once the PHY object reports link up
- * and is made part of a port then this bit for the PHY index is cleared.
- */
- u8 invalid_phy_mask;
-
- /*
- * This field saves the current interrupt coalescing number of the controller.
- */
- u16 interrupt_coalesce_number;
-
- /*
- * This field saves the current interrupt coalescing timeout value in microseconds.
- */
- u32 interrupt_coalesce_timeout;
-
- /**
- * This field is a pointer to the memory mapped register space for the
- * struct smu_registers.
- */
- struct smu_registers __iomem *smu_registers;
-
- /**
- * This field is a pointer to the memory mapped register space for the
- * struct scu_registers.
- */
- struct scu_registers __iomem *scu_registers;
-
-};
-
-/**
- * enum scic_sds_controller_states - This enumeration depicts all the states
- * for the common controller state machine.
- */
-enum scic_sds_controller_states {
- /**
- * Simply the initial state for the base controller state machine.
- */
- SCI_BASE_CONTROLLER_STATE_INITIAL = 0,
-
- /**
- * This state indicates that the controller is reset. The memory for
- * the controller is in it's initial state, but the controller requires
- * initialization.
- * This state is entered from the INITIAL state.
- * This state is entered from the RESETTING state.
- */
- SCI_BASE_CONTROLLER_STATE_RESET,
-
- /**
- * This state is typically an action state that indicates the controller
- * is in the process of initialization. In this state no new IO operations
- * are permitted.
- * This state is entered from the RESET state.
- */
- SCI_BASE_CONTROLLER_STATE_INITIALIZING,
-
- /**
- * This state indicates that the controller has been successfully
- * initialized. In this state no new IO operations are permitted.
- * This state is entered from the INITIALIZING state.
- */
- SCI_BASE_CONTROLLER_STATE_INITIALIZED,
-
- /**
- * This state indicates the the controller is in the process of becoming
- * ready (i.e. starting). In this state no new IO operations are permitted.
- * This state is entered from the INITIALIZED state.
- */
- SCI_BASE_CONTROLLER_STATE_STARTING,
-
- /**
- * This state indicates the controller is now ready. Thus, the user
- * is able to perform IO operations on the controller.
- * This state is entered from the STARTING state.
- */
- SCI_BASE_CONTROLLER_STATE_READY,
-
- /**
- * This state is typically an action state that indicates the controller
- * is in the process of resetting. Thus, the user is unable to perform
- * IO operations on the controller. A reset is considered destructive in
- * most cases.
- * This state is entered from the READY state.
- * This state is entered from the FAILED state.
- * This state is entered from the STOPPED state.
- */
- SCI_BASE_CONTROLLER_STATE_RESETTING,
-
- /**
- * This state indicates that the controller is in the process of stopping.
- * In this state no new IO operations are permitted, but existing IO
- * operations are allowed to complete.
- * This state is entered from the READY state.
- */
- SCI_BASE_CONTROLLER_STATE_STOPPING,
-
- /**
- * This state indicates that the controller has successfully been stopped.
- * In this state no new IO operations are permitted.
- * This state is entered from the STOPPING state.
- */
- SCI_BASE_CONTROLLER_STATE_STOPPED,
-
- /**
- * This state indicates that the controller could not successfully be
- * initialized. In this state no new IO operations are permitted.
- * This state is entered from the INITIALIZING state.
- * This state is entered from the STARTING state.
- * This state is entered from the STOPPING state.
- * This state is entered from the RESETTING state.
- */
- SCI_BASE_CONTROLLER_STATE_FAILED,
-
- SCI_BASE_CONTROLLER_MAX_STATES
-
-};
-
-/**
- * INCREMENT_QUEUE_GET() -
- *
- * This macro will increment the specified index to and if the index wraps to 0
- * it will toggel the cycle bit.
- */
-#define INCREMENT_QUEUE_GET(index, cycle, entry_count, bit_toggle) \
- { \
- if ((index) + 1 == entry_count) { \
- (index) = 0; \
- (cycle) = (cycle) ^ (bit_toggle); \
- } else { \
- index = index + 1; \
- } \
- }
-
-/**
- * scic_sds_controller_get_port_configuration_agent() -
- *
- * This is a helper macro to get the port configuration agent from the
- * controller object.
- */
-#define scic_sds_controller_get_port_configuration_agent(controller) \
- (&(controller)->port_agent)
-
-/**
- * scic_sds_controller_get_protocol_engine_group() -
- *
- * This macro returns the protocol engine group for this controller object.
- * Presently we only support protocol engine group 0 so just return that
- */
-#define scic_sds_controller_get_protocol_engine_group(controller) 0
-
-/**
- * scic_sds_io_tag_construct() -
- *
- * This macro constructs an IO tag from the sequence and index values.
- */
-#define scic_sds_io_tag_construct(sequence, task_index) \
- ((sequence) << 12 | (task_index))
-
-/**
- * scic_sds_io_tag_get_sequence() -
- *
- * This macro returns the IO sequence from the IO tag value.
- */
-#define scic_sds_io_tag_get_sequence(io_tag) \
- (((io_tag) & 0xF000) >> 12)
-
-/**
- * scic_sds_io_tag_get_index() -
- *
- * This macro returns the TCi from the io tag value
- */
-#define scic_sds_io_tag_get_index(io_tag) \
- ((io_tag) & 0x0FFF)
-
-/**
- * scic_sds_io_sequence_increment() -
- *
- * This is a helper macro to increment the io sequence count. We may find in
- * the future that it will be faster to store the sequence count in such a way
- * as we dont perform the shift operation to build io tag values so therefore
- * need a way to incrment them correctly
- */
-#define scic_sds_io_sequence_increment(value) \
- ((value) = (((value) + 1) & 0x000F))
-
-/* expander attached sata devices require 3 rnc slots */
-static inline int scic_sds_remote_device_node_count(struct scic_sds_remote_device *sci_dev)
-{
- struct domain_device *dev = sci_dev_to_domain(sci_dev);
-
- if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) &&
- !sci_dev->is_direct_attached)
- return SCU_STP_REMOTE_NODE_COUNT;
- return SCU_SSP_REMOTE_NODE_COUNT;
-}
-
-/**
- * scic_sds_controller_set_invalid_phy() -
- *
- * This macro will set the bit in the invalid phy mask for this controller
- * object. This is used to control messages reported for invalid link up
- * notifications.
- */
-#define scic_sds_controller_set_invalid_phy(controller, phy) \
- ((controller)->invalid_phy_mask |= (1 << (phy)->phy_index))
-
-/**
- * scic_sds_controller_clear_invalid_phy() -
- *
- * This macro will clear the bit in the invalid phy mask for this controller
- * object. This is used to control messages reported for invalid link up
- * notifications.
- */
-#define scic_sds_controller_clear_invalid_phy(controller, phy) \
- ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index))
-
-void scic_sds_controller_post_request(
- struct scic_sds_controller *this_controller,
- u32 request);
-
-void scic_sds_controller_release_frame(
- struct scic_sds_controller *this_controller,
- u32 frame_index);
-
-void scic_sds_controller_copy_sata_response(
- void *response_buffer,
- void *frame_header,
- void *frame_buffer);
-
-enum sci_status scic_sds_controller_allocate_remote_node_context(
- struct scic_sds_controller *this_controller,
- struct scic_sds_remote_device *sci_dev,
- u16 *node_id);
-
-void scic_sds_controller_free_remote_node_context(
- struct scic_sds_controller *this_controller,
- struct scic_sds_remote_device *sci_dev,
- u16 node_id);
-
-union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer(
- struct scic_sds_controller *this_controller,
- u16 node_id);
-
-struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic,
- u16 io_tag);
-
-struct scu_task_context *scic_sds_controller_get_task_context_buffer(
- struct scic_sds_controller *this_controller,
- u16 io_tag);
-
-void scic_sds_controller_power_control_queue_insert(
- struct scic_sds_controller *this_controller,
- struct scic_sds_phy *sci_phy);
-
-void scic_sds_controller_power_control_queue_remove(
- struct scic_sds_controller *this_controller,
- struct scic_sds_phy *sci_phy);
-
-void scic_sds_controller_link_up(
- struct scic_sds_controller *this_controller,
- struct scic_sds_port *sci_port,
- struct scic_sds_phy *sci_phy);
-
-void scic_sds_controller_link_down(
- struct scic_sds_controller *this_controller,
- struct scic_sds_port *sci_port,
- struct scic_sds_phy *sci_phy);
-
-void scic_sds_controller_remote_device_stopped(
- struct scic_sds_controller *this_controller,
- struct scic_sds_remote_device *sci_dev);
-
-void scic_sds_controller_copy_task_context(
- struct scic_sds_controller *this_controller,
- struct scic_sds_request *this_request);
-
-void scic_sds_controller_register_setup(
- struct scic_sds_controller *this_controller);
-
-enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req);
-
-#endif /* _SCIC_SDS_CONTROLLER_H_ */
diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c
index c6df0e2c842e..c82ccb93fd9b 100644
--- a/drivers/scsi/isci/core/scic_sds_phy.c
+++ b/drivers/scsi/isci/core/scic_sds_phy.c
@@ -55,14 +55,13 @@
#include <scsi/sas.h>
#include "sas.h"
+#include "host.h"
#include "sci_base_state.h"
#include "sci_base_state_machine.h"
#include "scic_phy.h"
-#include "scic_sds_controller.h"
#include "scic_sds_phy.h"
#include "scic_sds_port.h"
#include "remote_node_context.h"
-#include "sci_environment.h"
#include "sci_util.h"
#include "scu_event_codes.h"
#include "timers.h"
diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c
index 9302e397e4ca..652d823d5fa3 100644
--- a/drivers/scsi/isci/core/scic_sds_port.c
+++ b/drivers/scsi/isci/core/scic_sds_port.c
@@ -53,16 +53,14 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include "scic_controller.h"
+#include "host.h"
#include "scic_phy.h"
#include "scic_port.h"
-#include "scic_sds_controller.h"
#include "scic_sds_phy.h"
#include "scic_sds_port.h"
#include "remote_device.h"
#include "remote_node_context.h"
#include "scic_sds_request.h"
-#include "sci_environment.h"
#include "scu_registers.h"
#include "timers.h"
diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h
index 3696debcce12..bd612d576093 100644
--- a/drivers/scsi/isci/core/scic_sds_port.h
+++ b/drivers/scsi/isci/core/scic_sds_port.h
@@ -57,6 +57,7 @@
#define _SCIC_SDS_PORT_H_
#include <linux/kernel.h>
+#include "isci.h"
#include "sas.h"
#include "scu_registers.h"
#include "sci_base_state_machine.h"
diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c
index 3fad8c1db6c9..a5871fddc09a 100644
--- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c
+++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c
@@ -53,9 +53,7 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include "sci_environment.h"
-#include "scic_controller.h"
-#include "scic_sds_controller.h"
+#include "host.h"
#include "scic_sds_port_configuration_agent.h"
#include "timers.h"
diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c
index de35885eb1f9..1405aa703c3a 100644
--- a/drivers/scsi/isci/core/scic_sds_request.c
+++ b/drivers/scsi/isci/core/scic_sds_request.c
@@ -54,9 +54,7 @@
*/
#include <scsi/sas.h>
-#include "scic_controller.h"
#include "scic_io_request.h"
-#include "scic_sds_controller.h"
#include "scu_registers.h"
#include "scic_sds_port.h"
#include "remote_device.h"
@@ -64,7 +62,6 @@
#include "scic_sds_smp_request.h"
#include "scic_sds_stp_request.h"
#include "scic_sds_unsolicited_frame_control.h"
-#include "sci_environment.h"
#include "sci_util.h"
#include "scu_completion_codes.h"
#include "scu_task_context.h"
diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c
index 2b911206e8d2..7f338948ae0d 100644
--- a/drivers/scsi/isci/core/scic_sds_smp_request.c
+++ b/drivers/scsi/isci/core/scic_sds_smp_request.c
@@ -55,15 +55,13 @@
#include <scsi/sas.h>
#include "sci_base_state_machine.h"
-#include "scic_controller.h"
-#include "scic_sds_controller.h"
#include "remote_device.h"
#include "scic_sds_request.h"
#include "scic_sds_smp_request.h"
-#include "sci_environment.h"
#include "sci_util.h"
#include "scu_completion_codes.h"
#include "scu_task_context.h"
+#include "host.h"
static void scu_smp_request_construct_task_context(
struct scic_sds_request *sci_req,
diff --git a/drivers/scsi/isci/core/scic_sds_ssp_request.c b/drivers/scsi/isci/core/scic_sds_ssp_request.c
index 18bf3874d6ac..137f6ddac82c 100644
--- a/drivers/scsi/isci/core/scic_sds_ssp_request.c
+++ b/drivers/scsi/isci/core/scic_sds_ssp_request.c
@@ -53,11 +53,9 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include "host.h"
#include "sci_base_state_machine.h"
-#include "scic_controller.h"
-#include "scic_sds_controller.h"
#include "scic_sds_request.h"
-#include "sci_environment.h"
#include "scu_completion_codes.h"
#include "scu_task_context.h"
diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c
index c1c316cad522..2f5095130cad 100644
--- a/drivers/scsi/isci/core/scic_sds_stp_request.c
+++ b/drivers/scsi/isci/core/scic_sds_stp_request.c
@@ -58,13 +58,11 @@
#include "sci_base_state.h"
#include "sci_base_state_machine.h"
#include "scic_io_request.h"
-#include "scic_sds_controller.h"
#include "remote_device.h"
#include "scic_sds_request.h"
#include "scic_sds_stp_pio_request.h"
#include "scic_sds_stp_request.h"
#include "scic_sds_unsolicited_frame_control.h"
-#include "sci_environment.h"
#include "sci_util.h"
#include "scu_completion_codes.h"
#include "scu_event_codes.h"
diff --git a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c
index 9e393e5df8ec..d0e03731377e 100644
--- a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c
+++ b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c
@@ -53,19 +53,10 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/**
- * This file contains the implementation of the
- * struct scic_sds_unsolicited_frame_control object and it's public, protected, and
- * private methods.
- *
- *
- */
-
+#include "host.h"
#include "scic_sds_unsolicited_frame_control.h"
#include "scu_registers.h"
-#include "scic_sds_controller.h"
#include "sci_util.h"
-#include "sci_environment.h"
/**
* This method will program the unsolicited frames (UFs) into the UF address
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 5847149857a9..43a5d7a8b291 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -52,18 +52,198 @@
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-
+#include <linux/device.h>
+#include <scsi/sas.h>
+#include "host.h"
#include "isci.h"
-#include "scic_io_request.h"
-#include "scic_port.h"
#include "port.h"
-#include "request.h"
#include "host.h"
#include "probe_roms.h"
-#include "scic_controller.h"
-#include "scic_sds_controller.h"
+#include "remote_device.h"
+#include "request.h"
+#include "scic_io_request.h"
+#include "scic_sds_port_configuration_agent.h"
+#include "sci_util.h"
+#include "scu_completion_codes.h"
+#include "scu_event_codes.h"
+#include "scu_registers.h"
+#include "scu_remote_node_context.h"
+#include "scu_task_context.h"
+#include "scu_unsolicited_frame.h"
#include "timers.h"
+#define SCU_CONTEXT_RAM_INIT_STALL_TIME 200
+
+/**
+ * smu_dcc_get_max_ports() -
+ *
+ * This macro returns the maximum number of logical ports supported by the
+ * hardware. The caller passes in the value read from the device context
+ * capacity register and this macro will mash and shift the value appropriately.
+ */
+#define smu_dcc_get_max_ports(dcc_value) \
+ (\
+ (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \
+ >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT) + 1 \
+ )
+
+/**
+ * smu_dcc_get_max_task_context() -
+ *
+ * This macro returns the maximum number of task contexts supported by the
+ * hardware. The caller passes in the value read from the device context
+ * capacity register and this macro will mash and shift the value appropriately.
+ */
+#define smu_dcc_get_max_task_context(dcc_value) \
+ (\
+ (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \
+ >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT) + 1 \
+ )
+
+/**
+ * smu_dcc_get_max_remote_node_context() -
+ *
+ * This macro returns the maximum number of remote node contexts supported by
+ * the hardware. The caller passes in the value read from the device context
+ * capacity register and this macro will mash and shift the value appropriately.
+ */
+#define smu_dcc_get_max_remote_node_context(dcc_value) \
+ (\
+ (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \
+ >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT) + 1 \
+ )
+
+
+#define SCIC_SDS_CONTROLLER_MIN_TIMER_COUNT 3
+#define SCIC_SDS_CONTROLLER_MAX_TIMER_COUNT 3
+
+/**
+ *
+ *
+ * The number of milliseconds to wait for a phy to start.
+ */
+#define SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT 100
+
+/**
+ *
+ *
+ * The number of milliseconds to wait while a given phy is consuming power
+ * before allowing another set of phys to consume power. Ultimately, this will
+ * be specified by OEM parameter.
+ */
+#define SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL 500
+
+/**
+ * NORMALIZE_PUT_POINTER() -
+ *
+ * This macro will normalize the completion queue put pointer so its value can
+ * be used as an array inde
+ */
+#define NORMALIZE_PUT_POINTER(x) \
+ ((x) & SMU_COMPLETION_QUEUE_PUT_POINTER_MASK)
+
+
+/**
+ * NORMALIZE_EVENT_POINTER() -
+ *
+ * This macro will normalize the completion queue event entry so its value can
+ * be used as an index.
+ */
+#define NORMALIZE_EVENT_POINTER(x) \
+ (\
+ ((x) & SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK) \
+ >> SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT \
+ )
+
+/**
+ * INCREMENT_COMPLETION_QUEUE_GET() -
+ *
+ * This macro will increment the controllers completion queue index value and
+ * possibly toggle the cycle bit if the completion queue index wraps back to 0.
+ */
+#define INCREMENT_COMPLETION_QUEUE_GET(controller, index, cycle) \
+ INCREMENT_QUEUE_GET(\
+ (index), \
+ (cycle), \
+ (controller)->completion_queue_entries, \
+ SMU_CQGR_CYCLE_BIT \
+ )
+
+/**
+ * INCREMENT_EVENT_QUEUE_GET() -
+ *
+ * This macro will increment the controllers event queue index value and
+ * possibly toggle the event cycle bit if the event queue index wraps back to 0.
+ */
+#define INCREMENT_EVENT_QUEUE_GET(controller, index, cycle) \
+ INCREMENT_QUEUE_GET(\
+ (index), \
+ (cycle), \
+ (controller)->completion_event_entries, \
+ SMU_CQGR_EVENT_CYCLE_BIT \
+ )
+
+
+/**
+ * NORMALIZE_GET_POINTER() -
+ *
+ * This macro will normalize the completion queue get pointer so its value can
+ * be used as an index into an array
+ */
+#define NORMALIZE_GET_POINTER(x) \
+ ((x) & SMU_COMPLETION_QUEUE_GET_POINTER_MASK)
+
+/**
+ * NORMALIZE_GET_POINTER_CYCLE_BIT() -
+ *
+ * This macro will normalize the completion queue cycle pointer so it matches
+ * the completion queue cycle bit
+ */
+#define NORMALIZE_GET_POINTER_CYCLE_BIT(x) \
+ ((SMU_CQGR_CYCLE_BIT & (x)) << (31 - SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT))
+
+/**
+ * COMPLETION_QUEUE_CYCLE_BIT() -
+ *
+ * This macro will return the cycle bit of the completion queue entry
+ */
+#define COMPLETION_QUEUE_CYCLE_BIT(x) ((x) & 0x80000000)
+
+static bool scic_sds_controller_completion_queue_has_entries(
+ struct scic_sds_controller *scic)
+{
+ u32 get_value = scic->completion_queue_get;
+ u32 get_index = get_value & SMU_COMPLETION_QUEUE_GET_POINTER_MASK;
+
+ if (NORMALIZE_GET_POINTER_CYCLE_BIT(get_value) ==
+ COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index]))
+ return true;
+
+ return false;
+}
+
+static bool scic_sds_controller_isr(struct scic_sds_controller *scic)
+{
+ if (scic_sds_controller_completion_queue_has_entries(scic)) {
+ return true;
+ } else {
+ /*
+ * we have a spurious interrupt it could be that we have already
+ * emptied the completion queue from a previous interrupt */
+ writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status);
+
+ /*
+ * There is a race in the hardware that could cause us not to be notified
+ * of an interrupt completion if we do not take this step. We will mask
+ * then unmask the interrupts so if there is another interrupt pending
+ * the clearing of the interrupt source we get the next interrupt message. */
+ writel(0xFF000000, &scic->smu_registers->interrupt_mask);
+ writel(0, &scic->smu_registers->interrupt_mask);
+ }
+
+ return false;
+}
+
irqreturn_t isci_msix_isr(int vec, void *data)
{
struct isci_host *ihost = data;
@@ -74,6 +254,411 @@ irqreturn_t isci_msix_isr(int vec, void *data)
return IRQ_HANDLED;
}
+static bool scic_sds_controller_error_isr(struct scic_sds_controller *scic)
+{
+ u32 interrupt_status;
+
+ interrupt_status =
+ readl(&scic->smu_registers->interrupt_status);
+ interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND);
+
+ if (interrupt_status != 0) {
+ /*
+ * There is an error interrupt pending so let it through and handle
+ * in the callback */
+ return true;
+ }
+
+ /*
+ * There is a race in the hardware that could cause us not to be notified
+ * of an interrupt completion if we do not take this step. We will mask
+ * then unmask the error interrupts so if there was another interrupt
+ * pending we will be notified.
+ * Could we write the value of (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND)? */
+ writel(0xff, &scic->smu_registers->interrupt_mask);
+ writel(0, &scic->smu_registers->interrupt_mask);
+
+ return false;
+}
+
+static void scic_sds_controller_task_completion(struct scic_sds_controller *scic,
+ u32 completion_entry)
+{
+ u32 index;
+ struct scic_sds_request *io_request;
+
+ index = SCU_GET_COMPLETION_INDEX(completion_entry);
+ io_request = scic->io_request_table[index];
+
+ /* Make sure that we really want to process this IO request */
+ if (
+ (io_request != NULL)
+ && (io_request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG)
+ && (
+ scic_sds_io_tag_get_sequence(io_request->io_tag)
+ == scic->io_request_sequence[index]
+ )
+ ) {
+ /* Yep this is a valid io request pass it along to the io request handler */
+ scic_sds_io_request_tc_completion(io_request, completion_entry);
+ }
+}
+
+static void scic_sds_controller_sdma_completion(struct scic_sds_controller *scic,
+ u32 completion_entry)
+{
+ u32 index;
+ struct scic_sds_request *io_request;
+ struct scic_sds_remote_device *device;
+
+ index = SCU_GET_COMPLETION_INDEX(completion_entry);
+
+ switch (scu_get_command_request_type(completion_entry)) {
+ case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC:
+ case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC:
+ io_request = scic->io_request_table[index];
+ dev_warn(scic_to_dev(scic),
+ "%s: SCIC SDS Completion type SDMA %x for io request "
+ "%p\n",
+ __func__,
+ completion_entry,
+ io_request);
+ /* @todo For a post TC operation we need to fail the IO
+ * request
+ */
+ break;
+
+ case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC:
+ case SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC:
+ case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC:
+ device = scic->device_table[index];
+ dev_warn(scic_to_dev(scic),
+ "%s: SCIC SDS Completion type SDMA %x for remote "
+ "device %p\n",
+ __func__,
+ completion_entry,
+ device);
+ /* @todo For a port RNC operation we need to fail the
+ * device
+ */
+ break;
+
+ default:
+ dev_warn(scic_to_dev(scic),
+ "%s: SCIC SDS Completion unknown SDMA completion "
+ "type %x\n",
+ __func__,
+ completion_entry);
+ break;
+
+ }
+}
+
+static void scic_sds_controller_unsolicited_frame(struct scic_sds_controller *scic,
+ u32 completion_entry)
+{
+ u32 index;
+ u32 frame_index;
+
+ struct isci_host *ihost = scic_to_ihost(scic);
+ struct scu_unsolicited_frame_header *frame_header;
+ struct scic_sds_phy *phy;
+ struct scic_sds_remote_device *device;
+
+ enum sci_status result = SCI_FAILURE;
+
+ frame_index = SCU_GET_FRAME_INDEX(completion_entry);
+
+ frame_header = scic->uf_control.buffers.array[frame_index].header;
+ scic->uf_control.buffers.array[frame_index].state = UNSOLICITED_FRAME_IN_USE;
+
+ if (SCU_GET_FRAME_ERROR(completion_entry)) {
+ /*
+ * / @todo If the IAF frame or SIGNATURE FIS frame has an error will
+ * / this cause a problem? We expect the phy initialization will
+ * / fail if there is an error in the frame. */
+ scic_sds_controller_release_frame(scic, frame_index);
+ return;
+ }
+
+ if (frame_header->is_address_frame) {
+ index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry);
+ phy = &ihost->phys[index].sci;
+ result = scic_sds_phy_frame_handler(phy, frame_index);
+ } else {
+
+ index = SCU_GET_COMPLETION_INDEX(completion_entry);
+
+ if (index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) {
+ /*
+ * This is a signature fis or a frame from a direct attached SATA
+ * device that has not yet been created. In either case forwared
+ * the frame to the PE and let it take care of the frame data. */
+ index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry);
+ phy = &ihost->phys[index].sci;
+ result = scic_sds_phy_frame_handler(phy, frame_index);
+ } else {
+ if (index < scic->remote_node_entries)
+ device = scic->device_table[index];
+ else
+ device = NULL;
+
+ if (device != NULL)
+ result = scic_sds_remote_device_frame_handler(device, frame_index);
+ else
+ scic_sds_controller_release_frame(scic, frame_index);
+ }
+ }
+
+ if (result != SCI_SUCCESS) {
+ /*
+ * / @todo Is there any reason to report some additional error message
+ * / when we get this failure notifiction? */
+ }
+}
+
+static void scic_sds_controller_event_completion(struct scic_sds_controller *scic,
+ u32 completion_entry)
+{
+ struct isci_host *ihost = scic_to_ihost(scic);
+ struct scic_sds_request *io_request;
+ struct scic_sds_remote_device *device;
+ struct scic_sds_phy *phy;
+ u32 index;
+
+ index = SCU_GET_COMPLETION_INDEX(completion_entry);
+
+ switch (scu_get_event_type(completion_entry)) {
+ case SCU_EVENT_TYPE_SMU_COMMAND_ERROR:
+ /* / @todo The driver did something wrong and we need to fix the condtion. */
+ dev_err(scic_to_dev(scic),
+ "%s: SCIC Controller 0x%p received SMU command error "
+ "0x%x\n",
+ __func__,
+ scic,
+ completion_entry);
+ break;
+
+ case SCU_EVENT_TYPE_SMU_PCQ_ERROR:
+ case SCU_EVENT_TYPE_SMU_ERROR:
+ case SCU_EVENT_TYPE_FATAL_MEMORY_ERROR:
+ /*
+ * / @todo This is a hardware failure and its likely that we want to
+ * / reset the controller. */
+ dev_err(scic_to_dev(scic),
+ "%s: SCIC Controller 0x%p received fatal controller "
+ "event 0x%x\n",
+ __func__,
+ scic,
+ completion_entry);
+ break;
+
+ case SCU_EVENT_TYPE_TRANSPORT_ERROR:
+ io_request = scic->io_request_table[index];
+ scic_sds_io_request_event_handler(io_request, completion_entry);
+ break;
+
+ case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT:
+ switch (scu_get_event_specifier(completion_entry)) {
+ case SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE:
+ case SCU_EVENT_SPECIFIC_TASK_TIMEOUT:
+ io_request = scic->io_request_table[index];
+ if (io_request != NULL)
+ scic_sds_io_request_event_handler(io_request, completion_entry);
+ else
+ dev_warn(scic_to_dev(scic),
+ "%s: SCIC Controller 0x%p received "
+ "event 0x%x for io request object "
+ "that doesnt exist.\n",
+ __func__,
+ scic,
+ completion_entry);
+
+ break;
+
+ case SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT:
+ device = scic->device_table[index];
+ if (device != NULL)
+ scic_sds_remote_device_event_handler(device, completion_entry);
+ else
+ dev_warn(scic_to_dev(scic),
+ "%s: SCIC Controller 0x%p received "
+ "event 0x%x for remote device object "
+ "that doesnt exist.\n",
+ __func__,
+ scic,
+ completion_entry);
+
+ break;
+ }
+ break;
+
+ case SCU_EVENT_TYPE_BROADCAST_CHANGE:
+ /*
+ * direct the broadcast change event to the phy first and then let
+ * the phy redirect the broadcast change to the port object */
+ case SCU_EVENT_TYPE_ERR_CNT_EVENT:
+ /*
+ * direct error counter event to the phy object since that is where
+ * we get the event notification. This is a type 4 event. */
+ case SCU_EVENT_TYPE_OSSP_EVENT:
+ index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry);
+ phy = &ihost->phys[index].sci;
+ scic_sds_phy_event_handler(phy, completion_entry);
+ break;
+
+ case SCU_EVENT_TYPE_RNC_SUSPEND_TX:
+ case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX:
+ case SCU_EVENT_TYPE_RNC_OPS_MISC:
+ if (index < scic->remote_node_entries) {
+ device = scic->device_table[index];
+
+ if (device != NULL)
+ scic_sds_remote_device_event_handler(device, completion_entry);
+ } else
+ dev_err(scic_to_dev(scic),
+ "%s: SCIC Controller 0x%p received event 0x%x "
+ "for remote device object 0x%0x that doesnt "
+ "exist.\n",
+ __func__,
+ scic,
+ completion_entry,
+ index);
+
+ break;
+
+ default:
+ dev_warn(scic_to_dev(scic),
+ "%s: SCIC Controller received unknown event code %x\n",
+ __func__,
+ completion_entry);
+ break;
+ }
+}
+
+
+
+static void scic_sds_controller_process_completions(struct scic_sds_controller *scic)
+{
+ u32 completion_count = 0;
+ u32 completion_entry;
+ u32 get_index;
+ u32 get_cycle;
+ u32 event_index;
+ u32 event_cycle;
+
+ dev_dbg(scic_to_dev(scic),
+ "%s: completion queue begining get:0x%08x\n",
+ __func__,
+ scic->completion_queue_get);
+
+ /* Get the component parts of the completion queue */
+ get_index = NORMALIZE_GET_POINTER(scic->completion_queue_get);
+ get_cycle = SMU_CQGR_CYCLE_BIT & scic->completion_queue_get;
+
+ event_index = NORMALIZE_EVENT_POINTER(scic->completion_queue_get);
+ event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & scic->completion_queue_get;
+
+ while (
+ NORMALIZE_GET_POINTER_CYCLE_BIT(get_cycle)
+ == COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index])
+ ) {
+ completion_count++;
+
+ completion_entry = scic->completion_queue[get_index];
+ INCREMENT_COMPLETION_QUEUE_GET(scic, get_index, get_cycle);
+
+ dev_dbg(scic_to_dev(scic),
+ "%s: completion queue entry:0x%08x\n",
+ __func__,
+ completion_entry);
+
+ switch (SCU_GET_COMPLETION_TYPE(completion_entry)) {
+ case SCU_COMPLETION_TYPE_TASK:
+ scic_sds_controller_task_completion(scic, completion_entry);
+ break;
+
+ case SCU_COMPLETION_TYPE_SDMA:
+ scic_sds_controller_sdma_completion(scic, completion_entry);
+ break;
+
+ case SCU_COMPLETION_TYPE_UFI:
+ scic_sds_controller_unsolicited_frame(scic, completion_entry);
+ break;
+
+ case SCU_COMPLETION_TYPE_EVENT:
+ INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle);
+ scic_sds_controller_event_completion(scic, completion_entry);
+ break;
+
+ case SCU_COMPLETION_TYPE_NOTIFY:
+ /*
+ * Presently we do the same thing with a notify event that we do with the
+ * other event codes. */
+ INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle);
+ scic_sds_controller_event_completion(scic, completion_entry);
+ break;
+
+ default:
+ dev_warn(scic_to_dev(scic),
+ "%s: SCIC Controller received unknown "
+ "completion type %x\n",
+ __func__,
+ completion_entry);
+ break;
+ }
+ }
+
+ /* Update the get register if we completed one or more entries */
+ if (completion_count > 0) {
+ scic->completion_queue_get =
+ SMU_CQGR_GEN_BIT(ENABLE) |
+ SMU_CQGR_GEN_BIT(EVENT_ENABLE) |
+ event_cycle |
+ SMU_CQGR_GEN_VAL(EVENT_POINTER, event_index) |
+ get_cycle |
+ SMU_CQGR_GEN_VAL(POINTER, get_index);
+
+ writel(scic->completion_queue_get,
+ &scic->smu_registers->completion_queue_get);
+
+ }
+
+ dev_dbg(scic_to_dev(scic),
+ "%s: completion queue ending get:0x%08x\n",
+ __func__,
+ scic->completion_queue_get);
+
+}
+
+static void scic_sds_controller_error_handler(struct scic_sds_controller *scic)
+{
+ u32 interrupt_status;
+
+ interrupt_status =
+ readl(&scic->smu_registers->interrupt_status);
+
+ if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) &&
+ scic_sds_controller_completion_queue_has_entries(scic)) {
+
+ scic_sds_controller_process_completions(scic);
+ writel(SMU_ISR_QUEUE_SUSPEND, &scic->smu_registers->interrupt_status);
+ } else {
+ dev_err(scic_to_dev(scic), "%s: status: %#x\n", __func__,
+ interrupt_status);
+
+ sci_base_state_machine_change_state(&scic->state_machine,
+ SCI_BASE_CONTROLLER_STATE_FAILED);
+
+ return;
+ }
+
+ /* If we dont process any completions I am not sure that we want to do this.
+ * We are in the middle of a hardware fault and should probably be reset.
+ */
+ writel(0, &scic->smu_registers->interrupt_mask);
+}
+
irqreturn_t isci_intx_isr(int vec, void *data)
{
irqreturn_t ret = IRQ_NONE;
@@ -112,7 +697,7 @@ irqreturn_t isci_error_isr(int vec, void *data)
* core library.
*
*/
-void isci_host_start_complete(struct isci_host *ihost, enum sci_status completion_status)
+static void isci_host_start_complete(struct isci_host *ihost, enum sci_status completion_status)
{
if (completion_status != SCI_SUCCESS)
dev_info(&ihost->pdev->dev,
@@ -142,6 +727,383 @@ int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time)
}
+/**
+ * scic_controller_get_suggested_start_timeout() - This method returns the
+ * suggested scic_controller_start() timeout amount. The user is free to
+ * use any timeout value, but this method provides the suggested minimum
+ * start timeout value. The returned value is based upon empirical
+ * information determined as a result of interoperability testing.
+ * @controller: the handle to the controller object for which to return the
+ * suggested start timeout.
+ *
+ * This method returns the number of milliseconds for the suggested start
+ * operation timeout.
+ */
+static u32 scic_controller_get_suggested_start_timeout(
+ struct scic_sds_controller *sc)
+{
+ /* Validate the user supplied parameters. */
+ if (sc == NULL)
+ return 0;
+
+ /*
+ * The suggested minimum timeout value for a controller start operation:
+ *
+ * Signature FIS Timeout
+ * + Phy Start Timeout
+ * + Number of Phy Spin Up Intervals
+ * ---------------------------------
+ * Number of milliseconds for the controller start operation.
+ *
+ * NOTE: The number of phy spin up intervals will be equivalent
+ * to the number of phys divided by the number phys allowed
+ * per interval - 1 (once OEM parameters are supported).
+ * Currently we assume only 1 phy per interval. */
+
+ return SCIC_SDS_SIGNATURE_FIS_TIMEOUT
+ + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT
+ + ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL);
+}
+
+static void scic_controller_enable_interrupts(
+ struct scic_sds_controller *scic)
+{
+ BUG_ON(scic->smu_registers == NULL);
+ writel(0, &scic->smu_registers->interrupt_mask);
+}
+
+void scic_controller_disable_interrupts(
+ struct scic_sds_controller *scic)
+{
+ BUG_ON(scic->smu_registers == NULL);
+ writel(0xffffffff, &scic->smu_registers->interrupt_mask);
+}
+
+static void scic_sds_controller_enable_port_task_scheduler(
+ struct scic_sds_controller *scic)
+{
+ u32 port_task_scheduler_value;
+
+ port_task_scheduler_value =
+ readl(&scic->scu_registers->peg0.ptsg.control);
+ port_task_scheduler_value |=
+ (SCU_PTSGCR_GEN_BIT(ETM_ENABLE) |
+ SCU_PTSGCR_GEN_BIT(PTSG_ENABLE));
+ writel(port_task_scheduler_value,
+ &scic->scu_registers->peg0.ptsg.control);
+}
+
+static void scic_sds_controller_assign_task_entries(struct scic_sds_controller *scic)
+{
+ u32 task_assignment;
+
+ /*
+ * Assign all the TCs to function 0
+ * TODO: Do we actually need to read this register to write it back?
+ */
+
+ task_assignment =
+ readl(&scic->smu_registers->task_context_assignment[0]);
+
+ task_assignment |= (SMU_TCA_GEN_VAL(STARTING, 0)) |
+ (SMU_TCA_GEN_VAL(ENDING, scic->task_context_entries - 1)) |
+ (SMU_TCA_GEN_BIT(RANGE_CHECK_ENABLE));
+
+ writel(task_assignment,
+ &scic->smu_registers->task_context_assignment[0]);
+
+}
+
+static void scic_sds_controller_initialize_completion_queue(struct scic_sds_controller *scic)
+{
+ u32 index;
+ u32 completion_queue_control_value;
+ u32 completion_queue_get_value;
+ u32 completion_queue_put_value;
+
+ scic->completion_queue_get = 0;
+
+ completion_queue_control_value = (
+ SMU_CQC_QUEUE_LIMIT_SET(scic->completion_queue_entries - 1)
+ | SMU_CQC_EVENT_LIMIT_SET(scic->completion_event_entries - 1)
+ );
+
+ writel(completion_queue_control_value,
+ &scic->smu_registers->completion_queue_control);
+
+
+ /* Set the completion queue get pointer and enable the queue */
+ completion_queue_get_value = (
+ (SMU_CQGR_GEN_VAL(POINTER, 0))
+ | (SMU_CQGR_GEN_VAL(EVENT_POINTER, 0))
+ | (SMU_CQGR_GEN_BIT(ENABLE))
+ | (SMU_CQGR_GEN_BIT(EVENT_ENABLE))
+ );
+
+ writel(completion_queue_get_value,
+ &scic->smu_registers->completion_queue_get);
+
+ /* Set the completion queue put pointer */
+ completion_queue_put_value = (
+ (SMU_CQPR_GEN_VAL(POINTER, 0))
+ | (SMU_CQPR_GEN_VAL(EVENT_POINTER, 0))
+ );
+
+ writel(completion_queue_put_value,
+ &scic->smu_registers->completion_queue_put);
+
+ /* Initialize the cycle bit of the completion queue entries */
+ for (index = 0; index < scic->completion_queue_entries; index++) {
+ /*
+ * If get.cycle_bit != completion_queue.cycle_bit
+ * its not a valid completion queue entry
+ * so at system start all entries are invalid */
+ scic->completion_queue[index] = 0x80000000;
+ }
+}
+
+static void scic_sds_controller_initialize_unsolicited_frame_queue(struct scic_sds_controller *scic)
+{
+ u32 frame_queue_control_value;
+ u32 frame_queue_get_value;
+ u32 frame_queue_put_value;
+
+ /* Write the queue size */
+ frame_queue_control_value =
+ SCU_UFQC_GEN_VAL(QUEUE_SIZE,
+ scic->uf_control.address_table.count);
+
+ writel(frame_queue_control_value,
+ &scic->scu_registers->sdma.unsolicited_frame_queue_control);
+
+ /* Setup the get pointer for the unsolicited frame queue */
+ frame_queue_get_value = (
+ SCU_UFQGP_GEN_VAL(POINTER, 0)
+ | SCU_UFQGP_GEN_BIT(ENABLE_BIT)
+ );
+
+ writel(frame_queue_get_value,
+ &scic->scu_registers->sdma.unsolicited_frame_get_pointer);
+ /* Setup the put pointer for the unsolicited frame queue */
+ frame_queue_put_value = SCU_UFQPP_GEN_VAL(POINTER, 0);
+ writel(frame_queue_put_value,
+ &scic->scu_registers->sdma.unsolicited_frame_put_pointer);
+}
+
+/**
+ * This method will attempt to transition into the ready state for the
+ * controller and indicate that the controller start operation has completed
+ * if all criteria are met.
+ * @scic: This parameter indicates the controller object for which
+ * to transition to ready.
+ * @status: This parameter indicates the status value to be pass into the call
+ * to scic_cb_controller_start_complete().
+ *
+ * none.
+ */
+static void scic_sds_controller_transition_to_ready(
+ struct scic_sds_controller *scic,
+ enum sci_status status)
+{
+ struct isci_host *ihost = scic_to_ihost(scic);
+
+ if (scic->state_machine.current_state_id ==
+ SCI_BASE_CONTROLLER_STATE_STARTING) {
+ /*
+ * We move into the ready state, because some of the phys/ports
+ * may be up and operational.
+ */
+ sci_base_state_machine_change_state(&scic->state_machine,
+ SCI_BASE_CONTROLLER_STATE_READY);
+
+ isci_host_start_complete(ihost, status);
+ }
+}
+
+static void scic_sds_controller_phy_timer_stop(struct scic_sds_controller *scic)
+{
+ isci_timer_stop(scic->phy_startup_timer);
+
+ scic->phy_startup_timer_pending = false;
+}
+
+static void scic_sds_controller_phy_timer_start(struct scic_sds_controller *scic)
+{
+ isci_timer_start(scic->phy_startup_timer,
+ SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT);
+
+ scic->phy_startup_timer_pending = true;
+}
+
+/**
+ * scic_sds_controller_start_next_phy - start phy
+ * @scic: controller
+ *
+ * If all the phys have been started, then attempt to transition the
+ * controller to the READY state and inform the user
+ * (scic_cb_controller_start_complete()).
+ */
+static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_controller *scic)
+{
+ struct isci_host *ihost = scic_to_ihost(scic);
+ struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1;
+ struct scic_sds_phy *sci_phy;
+ enum sci_status status;
+
+ status = SCI_SUCCESS;
+
+ if (scic->phy_startup_timer_pending)
+ return status;
+
+ if (scic->next_phy_to_start >= SCI_MAX_PHYS) {
+ bool is_controller_start_complete = true;
+ u32 state;
+ u8 index;
+
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ sci_phy = &ihost->phys[index].sci;
+ state = sci_phy->state_machine.current_state_id;
+
+ if (!scic_sds_phy_get_port(sci_phy))
+ continue;
+
+ /* The controller start operation is complete iff:
+ * - all links have been given an opportunity to start
+ * - have no indication of a connected device
+ * - have an indication of a connected device and it has
+ * finished the link training process.
+ */
+ if ((sci_phy->is_in_link_training == false &&
+ state == SCI_BASE_PHY_STATE_INITIAL) ||
+ (sci_phy->is_in_link_training == false &&
+ state == SCI_BASE_PHY_STATE_STOPPED) ||
+ (sci_phy->is_in_link_training == true &&
+ state == SCI_BASE_PHY_STATE_STARTING)) {
+ is_controller_start_complete = false;
+ break;
+ }
+ }
+
+ /*
+ * The controller has successfully finished the start process.
+ * Inform the SCI Core user and transition to the READY state. */
+ if (is_controller_start_complete == true) {
+ scic_sds_controller_transition_to_ready(scic, SCI_SUCCESS);
+ scic_sds_controller_phy_timer_stop(scic);
+ }
+ } else {
+ sci_phy = &ihost->phys[scic->next_phy_to_start].sci;
+
+ if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) {
+ if (scic_sds_phy_get_port(sci_phy) == NULL) {
+ scic->next_phy_to_start++;
+
+ /* Caution recursion ahead be forwarned
+ *
+ * The PHY was never added to a PORT in MPC mode
+ * so start the next phy in sequence This phy
+ * will never go link up and will not draw power
+ * the OEM parameters either configured the phy
+ * incorrectly for the PORT or it was never
+ * assigned to a PORT
+ */
+ return scic_sds_controller_start_next_phy(scic);
+ }
+ }
+
+ status = scic_sds_phy_start(sci_phy);
+
+ if (status == SCI_SUCCESS) {
+ scic_sds_controller_phy_timer_start(scic);
+ } else {
+ dev_warn(scic_to_dev(scic),
+ "%s: Controller stop operation failed "
+ "to stop phy %d because of status "
+ "%d.\n",
+ __func__,
+ ihost->phys[scic->next_phy_to_start].sci.phy_index,
+ status);
+ }
+
+ scic->next_phy_to_start++;
+ }
+
+ return status;
+}
+
+static void scic_sds_controller_phy_startup_timeout_handler(void *_scic)
+{
+ struct scic_sds_controller *scic = _scic;
+ enum sci_status status;
+
+ scic->phy_startup_timer_pending = false;
+ status = SCI_FAILURE;
+ while (status != SCI_SUCCESS)
+ status = scic_sds_controller_start_next_phy(scic);
+}
+
+static enum sci_status scic_controller_start(struct scic_sds_controller *scic,
+ u32 timeout)
+{
+ struct isci_host *ihost = scic_to_ihost(scic);
+ enum sci_status result;
+ u16 index;
+
+ if (scic->state_machine.current_state_id !=
+ SCI_BASE_CONTROLLER_STATE_INITIALIZED) {
+ dev_warn(scic_to_dev(scic),
+ "SCIC Controller start operation requested in "
+ "invalid state\n");
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ /* Build the TCi free pool */
+ sci_pool_initialize(scic->tci_pool);
+ for (index = 0; index < scic->task_context_entries; index++)
+ sci_pool_put(scic->tci_pool, index);
+
+ /* Build the RNi free pool */
+ scic_sds_remote_node_table_initialize(
+ &scic->available_remote_nodes,
+ scic->remote_node_entries);
+
+ /*
+ * Before anything else lets make sure we will not be
+ * interrupted by the hardware.
+ */
+ scic_controller_disable_interrupts(scic);
+
+ /* Enable the port task scheduler */
+ scic_sds_controller_enable_port_task_scheduler(scic);
+
+ /* Assign all the task entries to scic physical function */
+ scic_sds_controller_assign_task_entries(scic);
+
+ /* Now initialize the completion queue */
+ scic_sds_controller_initialize_completion_queue(scic);
+
+ /* Initialize the unsolicited frame queue for use */
+ scic_sds_controller_initialize_unsolicited_frame_queue(scic);
+
+ /* Start all of the ports on this controller */
+ for (index = 0; index < scic->logical_port_entries; index++) {
+ struct scic_sds_port *sci_port = &ihost->ports[index].sci;
+
+ result = sci_port->state_handlers->start_handler(sci_port);
+ if (result)
+ return result;
+ }
+
+ scic_sds_controller_start_next_phy(scic);
+
+ isci_timer_start(scic->timeout_timer, timeout);
+
+ sci_base_state_machine_change_state(&scic->state_machine,
+ SCI_BASE_CONTROLLER_STATE_STARTING);
+
+ return SCI_SUCCESS;
+}
+
void isci_host_scan_start(struct Scsi_Host *shost)
{
struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha;
@@ -155,7 +1117,7 @@ void isci_host_scan_start(struct Scsi_Host *shost)
spin_unlock_irq(&ihost->scic_lock);
}
-void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion_status)
+static void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion_status)
{
isci_host_change_state(ihost, isci_stopped);
scic_controller_disable_interrupts(&ihost->sci);
@@ -163,6 +1125,19 @@ void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion
wake_up(&ihost->eventq);
}
+static void scic_sds_controller_completion_handler(struct scic_sds_controller *scic)
+{
+ /* Empty out the completion queue */
+ if (scic_sds_controller_completion_queue_has_entries(scic))
+ scic_sds_controller_process_completions(scic);
+
+ /* Clear the interrupt and enable all interrupts again */
+ writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status);
+ /* Could we write the value of SMU_ISR_COMPLETION? */
+ writel(0xFF000000, &scic->smu_registers->interrupt_mask);
+ writel(0, &scic->smu_registers->interrupt_mask);
+}
+
/**
* isci_host_completion_routine() - This function is the delayed service
* routine that calls the sci core library's completion handler. It's
@@ -273,6 +1248,75 @@ static void isci_host_completion_routine(unsigned long data)
}
+/**
+ * scic_controller_stop() - This method will stop an individual controller
+ * object.This method will invoke the associated user callback upon
+ * completion. The completion callback is called when the following
+ * conditions are met: -# the method return status is SCI_SUCCESS. -# the
+ * controller has been quiesced. This method will ensure that all IO
+ * requests are quiesced, phys are stopped, and all additional operation by
+ * the hardware is halted.
+ * @controller: the handle to the controller object to stop.
+ * @timeout: This parameter specifies the number of milliseconds in which the
+ * stop operation should complete.
+ *
+ * The controller must be in the STARTED or STOPPED state. Indicate if the
+ * controller stop method succeeded or failed in some way. SCI_SUCCESS if the
+ * stop operation successfully began. SCI_WARNING_ALREADY_IN_STATE if the
+ * controller is already in the STOPPED state. SCI_FAILURE_INVALID_STATE if the
+ * controller is not either in the STARTED or STOPPED states.
+ */
+static enum sci_status scic_controller_stop(struct scic_sds_controller *scic,
+ u32 timeout)
+{
+ if (scic->state_machine.current_state_id !=
+ SCI_BASE_CONTROLLER_STATE_READY) {
+ dev_warn(scic_to_dev(scic),
+ "SCIC Controller stop operation requested in "
+ "invalid state\n");
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ isci_timer_start(scic->timeout_timer, timeout);
+ sci_base_state_machine_change_state(&scic->state_machine,
+ SCI_BASE_CONTROLLER_STATE_STOPPING);
+ return SCI_SUCCESS;
+}
+
+/**
+ * scic_controller_reset() - This method will reset the supplied core
+ * controller regardless of the state of said controller. This operation is
+ * considered destructive. In other words, all current operations are wiped
+ * out. No IO completions for outstanding devices occur. Outstanding IO
+ * requests are not aborted or completed at the actual remote device.
+ * @controller: the handle to the controller object to reset.
+ *
+ * Indicate if the controller reset method succeeded or failed in some way.
+ * SCI_SUCCESS if the reset operation successfully started. SCI_FATAL_ERROR if
+ * the controller reset operation is unable to complete.
+ */
+static enum sci_status scic_controller_reset(struct scic_sds_controller *scic)
+{
+ switch (scic->state_machine.current_state_id) {
+ case SCI_BASE_CONTROLLER_STATE_RESET:
+ case SCI_BASE_CONTROLLER_STATE_READY:
+ case SCI_BASE_CONTROLLER_STATE_STOPPED:
+ case SCI_BASE_CONTROLLER_STATE_FAILED:
+ /*
+ * The reset operation is not a graceful cleanup, just
+ * perform the state transition.
+ */
+ sci_base_state_machine_change_state(&scic->state_machine,
+ SCI_BASE_CONTROLLER_STATE_RESETTING);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(scic_to_dev(scic),
+ "SCIC Controller reset operation requested in "
+ "invalid state\n");
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
void isci_host_deinit(struct isci_host *ihost)
{
int i;
@@ -341,6 +1385,1109 @@ static void isci_user_parameters_get(
u->max_number_concurrent_device_spin_up = max_concurr_spinup;
}
+static void scic_sds_controller_initial_state_enter(void *object)
+{
+ struct scic_sds_controller *scic = object;
+
+ sci_base_state_machine_change_state(&scic->state_machine,
+ SCI_BASE_CONTROLLER_STATE_RESET);
+}
+
+static inline void scic_sds_controller_starting_state_exit(void *object)
+{
+ struct scic_sds_controller *scic = object;
+
+ isci_timer_stop(scic->timeout_timer);
+}
+
+#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS 853
+#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS 1280
+#define INTERRUPT_COALESCE_TIMEOUT_MAX_US 2700000
+#define INTERRUPT_COALESCE_NUMBER_MAX 256
+#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN 7
+#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX 28
+
+/**
+ * scic_controller_set_interrupt_coalescence() - This method allows the user to
+ * configure the interrupt coalescence.
+ * @controller: This parameter represents the handle to the controller object
+ * for which its interrupt coalesce register is overridden.
+ * @coalesce_number: Used to control the number of entries in the Completion
+ * Queue before an interrupt is generated. If the number of entries exceed
+ * this number, an interrupt will be generated. The valid range of the input
+ * is [0, 256]. A setting of 0 results in coalescing being disabled.
+ * @coalesce_timeout: Timeout value in microseconds. The valid range of the
+ * input is [0, 2700000] . A setting of 0 is allowed and results in no
+ * interrupt coalescing timeout.
+ *
+ * Indicate if the user successfully set the interrupt coalesce parameters.
+ * SCI_SUCCESS The user successfully updated the interrutp coalescence.
+ * SCI_FAILURE_INVALID_PARAMETER_VALUE The user input value is out of range.
+ */
+static enum sci_status scic_controller_set_interrupt_coalescence(
+ struct scic_sds_controller *scic_controller,
+ u32 coalesce_number,
+ u32 coalesce_timeout)
+{
+ u8 timeout_encode = 0;
+ u32 min = 0;
+ u32 max = 0;
+
+ /* Check if the input parameters fall in the range. */
+ if (coalesce_number > INTERRUPT_COALESCE_NUMBER_MAX)
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+
+ /*
+ * Defined encoding for interrupt coalescing timeout:
+ * Value Min Max Units
+ * ----- --- --- -----
+ * 0 - - Disabled
+ * 1 13.3 20.0 ns
+ * 2 26.7 40.0
+ * 3 53.3 80.0
+ * 4 106.7 160.0
+ * 5 213.3 320.0
+ * 6 426.7 640.0
+ * 7 853.3 1280.0
+ * 8 1.7 2.6 us
+ * 9 3.4 5.1
+ * 10 6.8 10.2
+ * 11 13.7 20.5
+ * 12 27.3 41.0
+ * 13 54.6 81.9
+ * 14 109.2 163.8
+ * 15 218.5 327.7
+ * 16 436.9 655.4
+ * 17 873.8 1310.7
+ * 18 1.7 2.6 ms
+ * 19 3.5 5.2
+ * 20 7.0 10.5
+ * 21 14.0 21.0
+ * 22 28.0 41.9
+ * 23 55.9 83.9
+ * 24 111.8 167.8
+ * 25 223.7 335.5
+ * 26 447.4 671.1
+ * 27 894.8 1342.2
+ * 28 1.8 2.7 s
+ * Others Undefined */
+
+ /*
+ * Use the table above to decide the encode of interrupt coalescing timeout
+ * value for register writing. */
+ if (coalesce_timeout == 0)
+ timeout_encode = 0;
+ else{
+ /* make the timeout value in unit of (10 ns). */
+ coalesce_timeout = coalesce_timeout * 100;
+ min = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS / 10;
+ max = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS / 10;
+
+ /* get the encode of timeout for register writing. */
+ for (timeout_encode = INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN;
+ timeout_encode <= INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX;
+ timeout_encode++) {
+ if (min <= coalesce_timeout && max > coalesce_timeout)
+ break;
+ else if (coalesce_timeout >= max && coalesce_timeout < min * 2
+ && coalesce_timeout <= INTERRUPT_COALESCE_TIMEOUT_MAX_US * 100) {
+ if ((coalesce_timeout - max) < (2 * min - coalesce_timeout))
+ break;
+ else{
+ timeout_encode++;
+ break;
+ }
+ } else {
+ max = max * 2;
+ min = min * 2;
+ }
+ }
+
+ if (timeout_encode == INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX + 1)
+ /* the value is out of range. */
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+ }
+
+ writel(SMU_ICC_GEN_VAL(NUMBER, coalesce_number) |
+ SMU_ICC_GEN_VAL(TIMER, timeout_encode),
+ &scic_controller->smu_registers->interrupt_coalesce_control);
+
+
+ scic_controller->interrupt_coalesce_number = (u16)coalesce_number;
+ scic_controller->interrupt_coalesce_timeout = coalesce_timeout / 100;
+
+ return SCI_SUCCESS;
+}
+
+
+static void scic_sds_controller_ready_state_enter(void *object)
+{
+ struct scic_sds_controller *scic = object;
+
+ /* set the default interrupt coalescence number and timeout value. */
+ scic_controller_set_interrupt_coalescence(scic, 0x10, 250);
+}
+
+static void scic_sds_controller_ready_state_exit(void *object)
+{
+ struct scic_sds_controller *scic = object;
+
+ /* disable interrupt coalescence. */
+ scic_controller_set_interrupt_coalescence(scic, 0, 0);
+}
+
+static enum sci_status scic_sds_controller_stop_phys(struct scic_sds_controller *scic)
+{
+ u32 index;
+ enum sci_status status;
+ enum sci_status phy_status;
+ struct isci_host *ihost = scic_to_ihost(scic);
+
+ status = SCI_SUCCESS;
+
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ phy_status = scic_sds_phy_stop(&ihost->phys[index].sci);
+
+ if (phy_status != SCI_SUCCESS &&
+ phy_status != SCI_FAILURE_INVALID_STATE) {
+ status = SCI_FAILURE;
+
+ dev_warn(scic_to_dev(scic),
+ "%s: Controller stop operation failed to stop "
+ "phy %d because of status %d.\n",
+ __func__,
+ ihost->phys[index].sci.phy_index, phy_status);
+ }
+ }
+
+ return status;
+}
+
+static enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller *scic)
+{
+ u32 index;
+ enum sci_status port_status;
+ enum sci_status status = SCI_SUCCESS;
+ struct isci_host *ihost = scic_to_ihost(scic);
+
+ for (index = 0; index < scic->logical_port_entries; index++) {
+ struct scic_sds_port *sci_port = &ihost->ports[index].sci;
+ scic_sds_port_handler_t stop;
+
+ stop = sci_port->state_handlers->stop_handler;
+ port_status = stop(sci_port);
+
+ if ((port_status != SCI_SUCCESS) &&
+ (port_status != SCI_FAILURE_INVALID_STATE)) {
+ status = SCI_FAILURE;
+
+ dev_warn(scic_to_dev(scic),
+ "%s: Controller stop operation failed to "
+ "stop port %d because of status %d.\n",
+ __func__,
+ sci_port->logical_port_index,
+ port_status);
+ }
+ }
+
+ return status;
+}
+
+static enum sci_status scic_sds_controller_stop_devices(struct scic_sds_controller *scic)
+{
+ u32 index;
+ enum sci_status status;
+ enum sci_status device_status;
+
+ status = SCI_SUCCESS;
+
+ for (index = 0; index < scic->remote_node_entries; index++) {
+ if (scic->device_table[index] != NULL) {
+ /* / @todo What timeout value do we want to provide to this request? */
+ device_status = scic_remote_device_stop(scic->device_table[index], 0);
+
+ if ((device_status != SCI_SUCCESS) &&
+ (device_status != SCI_FAILURE_INVALID_STATE)) {
+ dev_warn(scic_to_dev(scic),
+ "%s: Controller stop operation failed "
+ "to stop device 0x%p because of "
+ "status %d.\n",
+ __func__,
+ scic->device_table[index], device_status);
+ }
+ }
+ }
+
+ return status;
+}
+
+static void scic_sds_controller_stopping_state_enter(void *object)
+{
+ struct scic_sds_controller *scic = object;
+
+ /* Stop all of the components for this controller */
+ scic_sds_controller_stop_phys(scic);
+ scic_sds_controller_stop_ports(scic);
+ scic_sds_controller_stop_devices(scic);
+}
+
+static void scic_sds_controller_stopping_state_exit(void *object)
+{
+ struct scic_sds_controller *scic = object;
+
+ isci_timer_stop(scic->timeout_timer);
+}
+
+
+/**
+ * scic_sds_controller_reset_hardware() -
+ *
+ * This method will reset the controller hardware.
+ */
+static void scic_sds_controller_reset_hardware(struct scic_sds_controller *scic)
+{
+ /* Disable interrupts so we dont take any spurious interrupts */
+ scic_controller_disable_interrupts(scic);
+
+ /* Reset the SCU */
+ writel(0xFFFFFFFF, &scic->smu_registers->soft_reset_control);
+
+ /* Delay for 1ms to before clearing the CQP and UFQPR. */
+ udelay(1000);
+
+ /* The write to the CQGR clears the CQP */
+ writel(0x00000000, &scic->smu_registers->completion_queue_get);
+
+ /* The write to the UFQGP clears the UFQPR */
+ writel(0, &scic->scu_registers->sdma.unsolicited_frame_get_pointer);
+}
+
+static void scic_sds_controller_resetting_state_enter(void *object)
+{
+ struct scic_sds_controller *scic = object;
+
+ scic_sds_controller_reset_hardware(scic);
+ sci_base_state_machine_change_state(&scic->state_machine,
+ SCI_BASE_CONTROLLER_STATE_RESET);
+}
+
+static const struct sci_base_state scic_sds_controller_state_table[] = {
+ [SCI_BASE_CONTROLLER_STATE_INITIAL] = {
+ .enter_state = scic_sds_controller_initial_state_enter,
+ },
+ [SCI_BASE_CONTROLLER_STATE_RESET] = {},
+ [SCI_BASE_CONTROLLER_STATE_INITIALIZING] = {},
+ [SCI_BASE_CONTROLLER_STATE_INITIALIZED] = {},
+ [SCI_BASE_CONTROLLER_STATE_STARTING] = {
+ .exit_state = scic_sds_controller_starting_state_exit,
+ },
+ [SCI_BASE_CONTROLLER_STATE_READY] = {
+ .enter_state = scic_sds_controller_ready_state_enter,
+ .exit_state = scic_sds_controller_ready_state_exit,
+ },
+ [SCI_BASE_CONTROLLER_STATE_RESETTING] = {
+ .enter_state = scic_sds_controller_resetting_state_enter,
+ },
+ [SCI_BASE_CONTROLLER_STATE_STOPPING] = {
+ .enter_state = scic_sds_controller_stopping_state_enter,
+ .exit_state = scic_sds_controller_stopping_state_exit,
+ },
+ [SCI_BASE_CONTROLLER_STATE_STOPPED] = {},
+ [SCI_BASE_CONTROLLER_STATE_FAILED] = {}
+};
+
+static void scic_sds_controller_set_default_config_parameters(struct scic_sds_controller *scic)
+{
+ /* these defaults are overridden by the platform / firmware */
+ struct isci_host *ihost = scic_to_ihost(scic);
+ u16 index;
+
+ /* Default to APC mode. */
+ scic->oem_parameters.sds1.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
+
+ /* Default to APC mode. */
+ scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up = 1;
+
+ /* Default to no SSC operation. */
+ scic->oem_parameters.sds1.controller.do_enable_ssc = false;
+
+ /* Initialize all of the port parameter information to narrow ports. */
+ for (index = 0; index < SCI_MAX_PORTS; index++) {
+ scic->oem_parameters.sds1.ports[index].phy_mask = 0;
+ }
+
+ /* Initialize all of the phy parameter information. */
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ /* Default to 6G (i.e. Gen 3) for now. */
+ scic->user_parameters.sds1.phys[index].max_speed_generation = 3;
+
+ /* the frequencies cannot be 0 */
+ scic->user_parameters.sds1.phys[index].align_insertion_frequency = 0x7f;
+ scic->user_parameters.sds1.phys[index].in_connection_align_insertion_frequency = 0xff;
+ scic->user_parameters.sds1.phys[index].notify_enable_spin_up_insertion_frequency = 0x33;
+
+ /*
+ * Previous Vitesse based expanders had a arbitration issue that
+ * is worked around by having the upper 32-bits of SAS address
+ * with a value greater then the Vitesse company identifier.
+ * Hence, usage of 0x5FCFFFFF. */
+ scic->oem_parameters.sds1.phys[index].sas_address.low = 0x1 + ihost->id;
+ scic->oem_parameters.sds1.phys[index].sas_address.high = 0x5FCFFFFF;
+ }
+
+ scic->user_parameters.sds1.stp_inactivity_timeout = 5;
+ scic->user_parameters.sds1.ssp_inactivity_timeout = 5;
+ scic->user_parameters.sds1.stp_max_occupancy_timeout = 5;
+ scic->user_parameters.sds1.ssp_max_occupancy_timeout = 20;
+ scic->user_parameters.sds1.no_outbound_task_timeout = 20;
+}
+
+
+
+/**
+ * scic_controller_construct() - This method will attempt to construct a
+ * controller object utilizing the supplied parameter information.
+ * @c: This parameter specifies the controller to be constructed.
+ * @scu_base: mapped base address of the scu registers
+ * @smu_base: mapped base address of the smu registers
+ *
+ * Indicate if the controller was successfully constructed or if it failed in
+ * some way. SCI_SUCCESS This value is returned if the controller was
+ * successfully constructed. SCI_WARNING_TIMER_CONFLICT This value is returned
+ * if the interrupt coalescence timer may cause SAS compliance issues for SMP
+ * Target mode response processing. SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE
+ * This value is returned if the controller does not support the supplied type.
+ * SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION This value is returned if the
+ * controller does not support the supplied initialization data version.
+ */
+static enum sci_status scic_controller_construct(struct scic_sds_controller *scic,
+ void __iomem *scu_base,
+ void __iomem *smu_base)
+{
+ struct isci_host *ihost = scic_to_ihost(scic);
+ u8 i;
+
+ sci_base_state_machine_construct(&scic->state_machine,
+ scic, scic_sds_controller_state_table,
+ SCI_BASE_CONTROLLER_STATE_INITIAL);
+
+ sci_base_state_machine_start(&scic->state_machine);
+
+ scic->scu_registers = scu_base;
+ scic->smu_registers = smu_base;
+
+ scic_sds_port_configuration_agent_construct(&scic->port_agent);
+
+ /* Construct the ports for this controller */
+ for (i = 0; i < SCI_MAX_PORTS; i++)
+ scic_sds_port_construct(&ihost->ports[i].sci, i, scic);
+ scic_sds_port_construct(&ihost->ports[i].sci, SCIC_SDS_DUMMY_PORT, scic);
+
+ /* Construct the phys for this controller */
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+ /* Add all the PHYs to the dummy port */
+ scic_sds_phy_construct(&ihost->phys[i].sci,
+ &ihost->ports[SCI_MAX_PORTS].sci, i);
+ }
+
+ scic->invalid_phy_mask = 0;
+
+ /* Set the default maximum values */
+ scic->completion_event_entries = SCU_EVENT_COUNT;
+ scic->completion_queue_entries = SCU_COMPLETION_QUEUE_COUNT;
+ scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES;
+ scic->logical_port_entries = SCI_MAX_PORTS;
+ scic->task_context_entries = SCU_IO_REQUEST_COUNT;
+ scic->uf_control.buffers.count = SCU_UNSOLICITED_FRAME_COUNT;
+ scic->uf_control.address_table.count = SCU_UNSOLICITED_FRAME_COUNT;
+
+ /* Initialize the User and OEM parameters to default values. */
+ scic_sds_controller_set_default_config_parameters(scic);
+
+ return scic_controller_reset(scic);
+}
+
+int scic_oem_parameters_validate(struct scic_sds_oem_params *oem)
+{
+ int i;
+
+ for (i = 0; i < SCI_MAX_PORTS; i++)
+ if (oem->ports[i].phy_mask > SCIC_SDS_PARM_PHY_MASK_MAX)
+ return -EINVAL;
+
+ for (i = 0; i < SCI_MAX_PHYS; i++)
+ if (oem->phys[i].sas_address.high == 0 &&
+ oem->phys[i].sas_address.low == 0)
+ return -EINVAL;
+
+ if (oem->controller.mode_type == SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) {
+ for (i = 0; i < SCI_MAX_PHYS; i++)
+ if (oem->ports[i].phy_mask != 0)
+ return -EINVAL;
+ } else if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) {
+ u8 phy_mask = 0;
+
+ for (i = 0; i < SCI_MAX_PHYS; i++)
+ phy_mask |= oem->ports[i].phy_mask;
+
+ if (phy_mask == 0)
+ return -EINVAL;
+ } else
+ return -EINVAL;
+
+ if (oem->controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT)
+ return -EINVAL;
+
+ return 0;
+}
+
+static enum sci_status scic_oem_parameters_set(struct scic_sds_controller *scic,
+ union scic_oem_parameters *scic_parms)
+{
+ u32 state = scic->state_machine.current_state_id;
+
+ if (state == SCI_BASE_CONTROLLER_STATE_RESET ||
+ state == SCI_BASE_CONTROLLER_STATE_INITIALIZING ||
+ state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) {
+
+ if (scic_oem_parameters_validate(&scic_parms->sds1))
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+ scic->oem_parameters.sds1 = scic_parms->sds1;
+
+ return SCI_SUCCESS;
+ }
+
+ return SCI_FAILURE_INVALID_STATE;
+}
+
+void scic_oem_parameters_get(
+ struct scic_sds_controller *scic,
+ union scic_oem_parameters *scic_parms)
+{
+ memcpy(scic_parms, (&scic->oem_parameters), sizeof(*scic_parms));
+}
+
+static void scic_sds_controller_timeout_handler(void *_scic)
+{
+ struct scic_sds_controller *scic = _scic;
+ struct isci_host *ihost = scic_to_ihost(scic);
+ struct sci_base_state_machine *sm = &scic->state_machine;
+
+ if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STARTING)
+ scic_sds_controller_transition_to_ready(scic, SCI_FAILURE_TIMEOUT);
+ else if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STOPPING) {
+ sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_FAILED);
+ isci_host_stop_complete(ihost, SCI_FAILURE_TIMEOUT);
+ } else /* / @todo Now what do we want to do in this case? */
+ dev_err(scic_to_dev(scic),
+ "%s: Controller timer fired when controller was not "
+ "in a state being timed.\n",
+ __func__);
+}
+
+static enum sci_status scic_sds_controller_initialize_phy_startup(struct scic_sds_controller *scic)
+{
+ struct isci_host *ihost = scic_to_ihost(scic);
+
+ scic->phy_startup_timer = isci_timer_create(ihost,
+ scic,
+ scic_sds_controller_phy_startup_timeout_handler);
+
+ if (scic->phy_startup_timer == NULL)
+ return SCI_FAILURE_INSUFFICIENT_RESOURCES;
+ else {
+ scic->next_phy_to_start = 0;
+ scic->phy_startup_timer_pending = false;
+ }
+
+ return SCI_SUCCESS;
+}
+
+static void scic_sds_controller_power_control_timer_start(struct scic_sds_controller *scic)
+{
+ isci_timer_start(scic->power_control.timer,
+ SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL);
+
+ scic->power_control.timer_started = true;
+}
+
+static void scic_sds_controller_power_control_timer_stop(struct scic_sds_controller *scic)
+{
+ if (scic->power_control.timer_started) {
+ isci_timer_stop(scic->power_control.timer);
+ scic->power_control.timer_started = false;
+ }
+}
+
+static void scic_sds_controller_power_control_timer_restart(struct scic_sds_controller *scic)
+{
+ scic_sds_controller_power_control_timer_stop(scic);
+ scic_sds_controller_power_control_timer_start(scic);
+}
+
+static void scic_sds_controller_power_control_timer_handler(
+ void *controller)
+{
+ struct scic_sds_controller *scic;
+
+ scic = (struct scic_sds_controller *)controller;
+
+ scic->power_control.phys_granted_power = 0;
+
+ if (scic->power_control.phys_waiting == 0) {
+ scic->power_control.timer_started = false;
+ } else {
+ struct scic_sds_phy *sci_phy = NULL;
+ u8 i;
+
+ for (i = 0;
+ (i < SCI_MAX_PHYS)
+ && (scic->power_control.phys_waiting != 0);
+ i++) {
+ if (scic->power_control.requesters[i] != NULL) {
+ if (scic->power_control.phys_granted_power <
+ scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) {
+ sci_phy = scic->power_control.requesters[i];
+ scic->power_control.requesters[i] = NULL;
+ scic->power_control.phys_waiting--;
+ scic->power_control.phys_granted_power++;
+ scic_sds_phy_consume_power_handler(sci_phy);
+ } else {
+ break;
+ }
+ }
+ }
+
+ /*
+ * It doesn't matter if the power list is empty, we need to start the
+ * timer in case another phy becomes ready.
+ */
+ scic_sds_controller_power_control_timer_start(scic);
+ }
+}
+
+/**
+ * This method inserts the phy in the stagger spinup control queue.
+ * @scic:
+ *
+ *
+ */
+void scic_sds_controller_power_control_queue_insert(
+ struct scic_sds_controller *scic,
+ struct scic_sds_phy *sci_phy)
+{
+ BUG_ON(sci_phy == NULL);
+
+ if (scic->power_control.phys_granted_power <
+ scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) {
+ scic->power_control.phys_granted_power++;
+ scic_sds_phy_consume_power_handler(sci_phy);
+
+ /*
+ * stop and start the power_control timer. When the timer fires, the
+ * no_of_phys_granted_power will be set to 0
+ */
+ scic_sds_controller_power_control_timer_restart(scic);
+ } else {
+ /* Add the phy in the waiting list */
+ scic->power_control.requesters[sci_phy->phy_index] = sci_phy;
+ scic->power_control.phys_waiting++;
+ }
+}
+
+/**
+ * This method removes the phy from the stagger spinup control queue.
+ * @scic:
+ *
+ *
+ */
+void scic_sds_controller_power_control_queue_remove(
+ struct scic_sds_controller *scic,
+ struct scic_sds_phy *sci_phy)
+{
+ BUG_ON(sci_phy == NULL);
+
+ if (scic->power_control.requesters[sci_phy->phy_index] != NULL) {
+ scic->power_control.phys_waiting--;
+ }
+
+ scic->power_control.requesters[sci_phy->phy_index] = NULL;
+}
+
+#define AFE_REGISTER_WRITE_DELAY 10
+
+/* Initialize the AFE for this phy index. We need to read the AFE setup from
+ * the OEM parameters
+ */
+static void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic)
+{
+ const struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1;
+ u32 afe_status;
+ u32 phy_id;
+
+ /* Clear DFX Status registers */
+ writel(0x0081000f, &scic->scu_registers->afe.afe_dfx_master_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ if (is_b0()) {
+ /* PM Rx Equalization Save, PM SPhy Rx Acknowledgement
+ * Timer, PM Stagger Timer */
+ writel(0x0007BFFF, &scic->scu_registers->afe.afe_pmsn_master_control2);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ }
+
+ /* Configure bias currents to normal */
+ if (is_a0())
+ writel(0x00005500, &scic->scu_registers->afe.afe_bias_control);
+ else if (is_a2())
+ writel(0x00005A00, &scic->scu_registers->afe.afe_bias_control);
+ else if (is_b0())
+ writel(0x00005F00, &scic->scu_registers->afe.afe_bias_control);
+
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /* Enable PLL */
+ if (is_b0())
+ writel(0x80040A08, &scic->scu_registers->afe.afe_pll_control0);
+ else
+ writel(0x80040908, &scic->scu_registers->afe.afe_pll_control0);
+
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /* Wait for the PLL to lock */
+ do {
+ afe_status = readl(&scic->scu_registers->afe.afe_common_block_status);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ } while ((afe_status & 0x00001000) == 0);
+
+ if (is_a0() || is_a2()) {
+ /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */
+ writel(0x7bcc96ad, &scic->scu_registers->afe.afe_pmsn_master_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ }
+
+ for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) {
+ const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id];
+
+ if (is_b0()) {
+ /* Configure transmitter SSC parameters */
+ writel(0x00030000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ } else {
+ /*
+ * All defaults, except the Receive Word Alignament/Comma Detect
+ * Enable....(0xe800) */
+ writel(0x00004512, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(0x0050100F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ }
+
+ /*
+ * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
+ * & increase TX int & ext bias 20%....(0xe85c) */
+ if (is_a0())
+ writel(0x000003D4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+ else if (is_a2())
+ writel(0x000003F0, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+ else {
+ /* Power down TX and RX (PWRDNTX and PWRDNRX) */
+ writel(0x000003d7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /*
+ * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
+ * & increase TX int & ext bias 20%....(0xe85c) */
+ writel(0x000003d4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+ }
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ if (is_a0() || is_a2()) {
+ /* Enable TX equalization (0xe824) */
+ writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ }
+
+ /*
+ * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On),
+ * RDD=0x0(RX Detect Enabled) ....(0xe800) */
+ writel(0x00004100, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /* Leave DFE/FFE on */
+ if (is_a0())
+ writel(0x3F09983F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
+ else if (is_a2())
+ writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
+ else {
+ writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ /* Enable TX equalization (0xe824) */
+ writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
+ }
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(oem_phy->afe_tx_amp_control0,
+ &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(oem_phy->afe_tx_amp_control1,
+ &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(oem_phy->afe_tx_amp_control2,
+ &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(oem_phy->afe_tx_amp_control3,
+ &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ }
+
+ /* Transfer control to the PEs */
+ writel(0x00010f00, &scic->scu_registers->afe.afe_dfx_master_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+}
+
+static enum sci_status scic_controller_set_mode(struct scic_sds_controller *scic,
+ enum sci_controller_mode operating_mode)
+{
+ enum sci_status status = SCI_SUCCESS;
+
+ if ((scic->state_machine.current_state_id ==
+ SCI_BASE_CONTROLLER_STATE_INITIALIZING) ||
+ (scic->state_machine.current_state_id ==
+ SCI_BASE_CONTROLLER_STATE_INITIALIZED)) {
+ switch (operating_mode) {
+ case SCI_MODE_SPEED:
+ scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES;
+ scic->task_context_entries = SCU_IO_REQUEST_COUNT;
+ scic->uf_control.buffers.count =
+ SCU_UNSOLICITED_FRAME_COUNT;
+ scic->completion_event_entries = SCU_EVENT_COUNT;
+ scic->completion_queue_entries =
+ SCU_COMPLETION_QUEUE_COUNT;
+ break;
+
+ case SCI_MODE_SIZE:
+ scic->remote_node_entries = SCI_MIN_REMOTE_DEVICES;
+ scic->task_context_entries = SCI_MIN_IO_REQUESTS;
+ scic->uf_control.buffers.count =
+ SCU_MIN_UNSOLICITED_FRAMES;
+ scic->completion_event_entries = SCU_MIN_EVENTS;
+ scic->completion_queue_entries =
+ SCU_MIN_COMPLETION_QUEUE_ENTRIES;
+ break;
+
+ default:
+ status = SCI_FAILURE_INVALID_PARAMETER_VALUE;
+ break;
+ }
+ } else
+ status = SCI_FAILURE_INVALID_STATE;
+
+ return status;
+}
+
+static void scic_sds_controller_initialize_power_control(struct scic_sds_controller *scic)
+{
+ struct isci_host *ihost = scic_to_ihost(scic);
+ scic->power_control.timer = isci_timer_create(ihost,
+ scic,
+ scic_sds_controller_power_control_timer_handler);
+
+ memset(scic->power_control.requesters, 0,
+ sizeof(scic->power_control.requesters));
+
+ scic->power_control.phys_waiting = 0;
+ scic->power_control.phys_granted_power = 0;
+}
+
+static enum sci_status scic_controller_initialize(struct scic_sds_controller *scic)
+{
+ struct sci_base_state_machine *sm = &scic->state_machine;
+ enum sci_status result = SCI_SUCCESS;
+ struct isci_host *ihost = scic_to_ihost(scic);
+ u32 index, state;
+
+ if (scic->state_machine.current_state_id !=
+ SCI_BASE_CONTROLLER_STATE_RESET) {
+ dev_warn(scic_to_dev(scic),
+ "SCIC Controller initialize operation requested "
+ "in invalid state\n");
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_INITIALIZING);
+
+ scic->timeout_timer = isci_timer_create(ihost, scic,
+ scic_sds_controller_timeout_handler);
+
+ scic_sds_controller_initialize_phy_startup(scic);
+
+ scic_sds_controller_initialize_power_control(scic);
+
+ /*
+ * There is nothing to do here for B0 since we do not have to
+ * program the AFE registers.
+ * / @todo The AFE settings are supposed to be correct for the B0 but
+ * / presently they seem to be wrong. */
+ scic_sds_controller_afe_initialization(scic);
+
+ if (result == SCI_SUCCESS) {
+ u32 status;
+ u32 terminate_loop;
+
+ /* Take the hardware out of reset */
+ writel(0, &scic->smu_registers->soft_reset_control);
+
+ /*
+ * / @todo Provide meaningfull error code for hardware failure
+ * result = SCI_FAILURE_CONTROLLER_HARDWARE; */
+ result = SCI_FAILURE;
+ terminate_loop = 100;
+
+ while (terminate_loop-- && (result != SCI_SUCCESS)) {
+ /* Loop until the hardware reports success */
+ udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME);
+ status = readl(&scic->smu_registers->control_status);
+
+ if ((status & SCU_RAM_INIT_COMPLETED) ==
+ SCU_RAM_INIT_COMPLETED)
+ result = SCI_SUCCESS;
+ }
+ }
+
+ if (result == SCI_SUCCESS) {
+ u32 max_supported_ports;
+ u32 max_supported_devices;
+ u32 max_supported_io_requests;
+ u32 device_context_capacity;
+
+ /*
+ * Determine what are the actaul device capacities that the
+ * hardware will support */
+ device_context_capacity =
+ readl(&scic->smu_registers->device_context_capacity);
+
+
+ max_supported_ports = smu_dcc_get_max_ports(device_context_capacity);
+ max_supported_devices = smu_dcc_get_max_remote_node_context(device_context_capacity);
+ max_supported_io_requests = smu_dcc_get_max_task_context(device_context_capacity);
+
+ /*
+ * Make all PEs that are unassigned match up with the
+ * logical ports
+ */
+ for (index = 0; index < max_supported_ports; index++) {
+ struct scu_port_task_scheduler_group_registers __iomem
+ *ptsg = &scic->scu_registers->peg0.ptsg;
+
+ writel(index, &ptsg->protocol_engine[index]);
+ }
+
+ /* Record the smaller of the two capacity values */
+ scic->logical_port_entries =
+ min(max_supported_ports, scic->logical_port_entries);
+
+ scic->task_context_entries =
+ min(max_supported_io_requests,
+ scic->task_context_entries);
+
+ scic->remote_node_entries =
+ min(max_supported_devices, scic->remote_node_entries);
+
+ /*
+ * Now that we have the correct hardware reported minimum values
+ * build the MDL for the controller. Default to a performance
+ * configuration.
+ */
+ scic_controller_set_mode(scic, SCI_MODE_SPEED);
+ }
+
+ /* Initialize hardware PCI Relaxed ordering in DMA engines */
+ if (result == SCI_SUCCESS) {
+ u32 dma_configuration;
+
+ /* Configure the payload DMA */
+ dma_configuration =
+ readl(&scic->scu_registers->sdma.pdma_configuration);
+ dma_configuration |=
+ SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE);
+ writel(dma_configuration,
+ &scic->scu_registers->sdma.pdma_configuration);
+
+ /* Configure the control DMA */
+ dma_configuration =
+ readl(&scic->scu_registers->sdma.cdma_configuration);
+ dma_configuration |=
+ SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE);
+ writel(dma_configuration,
+ &scic->scu_registers->sdma.cdma_configuration);
+ }
+
+ /*
+ * Initialize the PHYs before the PORTs because the PHY registers
+ * are accessed during the port initialization.
+ */
+ if (result == SCI_SUCCESS) {
+ /* Initialize the phys */
+ for (index = 0;
+ (result == SCI_SUCCESS) && (index < SCI_MAX_PHYS);
+ index++) {
+ result = scic_sds_phy_initialize(
+ &ihost->phys[index].sci,
+ &scic->scu_registers->peg0.pe[index].tl,
+ &scic->scu_registers->peg0.pe[index].ll);
+ }
+ }
+
+ if (result == SCI_SUCCESS) {
+ /* Initialize the logical ports */
+ for (index = 0;
+ (index < scic->logical_port_entries) &&
+ (result == SCI_SUCCESS);
+ index++) {
+ result = scic_sds_port_initialize(
+ &ihost->ports[index].sci,
+ &scic->scu_registers->peg0.ptsg.port[index],
+ &scic->scu_registers->peg0.ptsg.protocol_engine,
+ &scic->scu_registers->peg0.viit[index]);
+ }
+ }
+
+ if (result == SCI_SUCCESS)
+ result = scic_sds_port_configuration_agent_initialize(
+ scic,
+ &scic->port_agent);
+
+ /* Advance the controller state machine */
+ if (result == SCI_SUCCESS)
+ state = SCI_BASE_CONTROLLER_STATE_INITIALIZED;
+ else
+ state = SCI_BASE_CONTROLLER_STATE_FAILED;
+ sci_base_state_machine_change_state(sm, state);
+
+ return result;
+}
+
+static enum sci_status scic_user_parameters_set(
+ struct scic_sds_controller *scic,
+ union scic_user_parameters *scic_parms)
+{
+ u32 state = scic->state_machine.current_state_id;
+
+ if (state == SCI_BASE_CONTROLLER_STATE_RESET ||
+ state == SCI_BASE_CONTROLLER_STATE_INITIALIZING ||
+ state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) {
+ u16 index;
+
+ /*
+ * Validate the user parameters. If they are not legal, then
+ * return a failure.
+ */
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ struct sci_phy_user_params *user_phy;
+
+ user_phy = &scic_parms->sds1.phys[index];
+
+ if (!((user_phy->max_speed_generation <=
+ SCIC_SDS_PARM_MAX_SPEED) &&
+ (user_phy->max_speed_generation >
+ SCIC_SDS_PARM_NO_SPEED)))
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+
+ if (user_phy->in_connection_align_insertion_frequency <
+ 3)
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+
+ if ((user_phy->in_connection_align_insertion_frequency <
+ 3) ||
+ (user_phy->align_insertion_frequency == 0) ||
+ (user_phy->
+ notify_enable_spin_up_insertion_frequency ==
+ 0))
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+ }
+
+ if ((scic_parms->sds1.stp_inactivity_timeout == 0) ||
+ (scic_parms->sds1.ssp_inactivity_timeout == 0) ||
+ (scic_parms->sds1.stp_max_occupancy_timeout == 0) ||
+ (scic_parms->sds1.ssp_max_occupancy_timeout == 0) ||
+ (scic_parms->sds1.no_outbound_task_timeout == 0))
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+
+ memcpy(&scic->user_parameters, scic_parms, sizeof(*scic_parms));
+
+ return SCI_SUCCESS;
+ }
+
+ return SCI_FAILURE_INVALID_STATE;
+}
+
+static int scic_controller_mem_init(struct scic_sds_controller *scic)
+{
+ struct device *dev = scic_to_dev(scic);
+ dma_addr_t dma_handle;
+ enum sci_status result;
+
+ scic->completion_queue = dmam_alloc_coherent(dev,
+ scic->completion_queue_entries * sizeof(u32),
+ &dma_handle, GFP_KERNEL);
+ if (!scic->completion_queue)
+ return -ENOMEM;
+
+ writel(lower_32_bits(dma_handle),
+ &scic->smu_registers->completion_queue_lower);
+ writel(upper_32_bits(dma_handle),
+ &scic->smu_registers->completion_queue_upper);
+
+ scic->remote_node_context_table = dmam_alloc_coherent(dev,
+ scic->remote_node_entries *
+ sizeof(union scu_remote_node_context),
+ &dma_handle, GFP_KERNEL);
+ if (!scic->remote_node_context_table)
+ return -ENOMEM;
+
+ writel(lower_32_bits(dma_handle),
+ &scic->smu_registers->remote_node_context_lower);
+ writel(upper_32_bits(dma_handle),
+ &scic->smu_registers->remote_node_context_upper);
+
+ scic->task_context_table = dmam_alloc_coherent(dev,
+ scic->task_context_entries *
+ sizeof(struct scu_task_context),
+ &dma_handle, GFP_KERNEL);
+ if (!scic->task_context_table)
+ return -ENOMEM;
+
+ writel(lower_32_bits(dma_handle),
+ &scic->smu_registers->host_task_table_lower);
+ writel(upper_32_bits(dma_handle),
+ &scic->smu_registers->host_task_table_upper);
+
+ result = scic_sds_unsolicited_frame_control_construct(scic);
+ if (result)
+ return result;
+
+ /*
+ * Inform the silicon as to the location of the UF headers and
+ * address table.
+ */
+ writel(lower_32_bits(scic->uf_control.headers.physical_address),
+ &scic->scu_registers->sdma.uf_header_base_address_lower);
+ writel(upper_32_bits(scic->uf_control.headers.physical_address),
+ &scic->scu_registers->sdma.uf_header_base_address_upper);
+
+ writel(lower_32_bits(scic->uf_control.address_table.physical_address),
+ &scic->scu_registers->sdma.uf_address_table_lower);
+ writel(upper_32_bits(scic->uf_control.address_table.physical_address),
+ &scic->scu_registers->sdma.uf_address_table_upper);
+
+ return 0;
+}
+
int isci_host_init(struct isci_host *isci_host)
{
int err = 0, i;
@@ -453,3 +2600,625 @@ int isci_host_init(struct isci_host *isci_host)
return 0;
}
+
+void scic_sds_controller_link_up(struct scic_sds_controller *scic,
+ struct scic_sds_port *port, struct scic_sds_phy *phy)
+{
+ switch (scic->state_machine.current_state_id) {
+ case SCI_BASE_CONTROLLER_STATE_STARTING:
+ scic_sds_controller_phy_timer_stop(scic);
+ scic->port_agent.link_up_handler(scic, &scic->port_agent,
+ port, phy);
+ scic_sds_controller_start_next_phy(scic);
+ break;
+ case SCI_BASE_CONTROLLER_STATE_READY:
+ scic->port_agent.link_up_handler(scic, &scic->port_agent,
+ port, phy);
+ break;
+ default:
+ dev_dbg(scic_to_dev(scic),
+ "%s: SCIC Controller linkup event from phy %d in "
+ "unexpected state %d\n", __func__, phy->phy_index,
+ scic->state_machine.current_state_id);
+ }
+}
+
+void scic_sds_controller_link_down(struct scic_sds_controller *scic,
+ struct scic_sds_port *port, struct scic_sds_phy *phy)
+{
+ switch (scic->state_machine.current_state_id) {
+ case SCI_BASE_CONTROLLER_STATE_STARTING:
+ case SCI_BASE_CONTROLLER_STATE_READY:
+ scic->port_agent.link_down_handler(scic, &scic->port_agent,
+ port, phy);
+ break;
+ default:
+ dev_dbg(scic_to_dev(scic),
+ "%s: SCIC Controller linkdown event from phy %d in "
+ "unexpected state %d\n",
+ __func__,
+ phy->phy_index,
+ scic->state_machine.current_state_id);
+ }
+}
+
+/**
+ * This is a helper method to determine if any remote devices on this
+ * controller are still in the stopping state.
+ *
+ */
+static bool scic_sds_controller_has_remote_devices_stopping(
+ struct scic_sds_controller *controller)
+{
+ u32 index;
+
+ for (index = 0; index < controller->remote_node_entries; index++) {
+ if ((controller->device_table[index] != NULL) &&
+ (controller->device_table[index]->state_machine.current_state_id
+ == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING))
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * This method is called by the remote device to inform the controller
+ * object that the remote device has stopped.
+ */
+void scic_sds_controller_remote_device_stopped(struct scic_sds_controller *scic,
+ struct scic_sds_remote_device *sci_dev)
+{
+ if (scic->state_machine.current_state_id !=
+ SCI_BASE_CONTROLLER_STATE_STOPPING) {
+ dev_dbg(scic_to_dev(scic),
+ "SCIC Controller 0x%p remote device stopped event "
+ "from device 0x%p in unexpected state %d\n",
+ scic, sci_dev,
+ scic->state_machine.current_state_id);
+ return;
+ }
+
+ if (!scic_sds_controller_has_remote_devices_stopping(scic)) {
+ sci_base_state_machine_change_state(&scic->state_machine,
+ SCI_BASE_CONTROLLER_STATE_STOPPED);
+ }
+}
+
+/**
+ * This method will write to the SCU PCP register the request value. The method
+ * is used to suspend/resume ports, devices, and phys.
+ * @scic:
+ *
+ *
+ */
+void scic_sds_controller_post_request(
+ struct scic_sds_controller *scic,
+ u32 request)
+{
+ dev_dbg(scic_to_dev(scic),
+ "%s: SCIC Controller 0x%p post request 0x%08x\n",
+ __func__,
+ scic,
+ request);
+
+ writel(request, &scic->smu_registers->post_context_port);
+}
+
+/**
+ * This method will copy the soft copy of the task context into the physical
+ * memory accessible by the controller.
+ * @scic: This parameter specifies the controller for which to copy
+ * the task context.
+ * @sci_req: This parameter specifies the request for which the task
+ * context is being copied.
+ *
+ * After this call is made the SCIC_SDS_IO_REQUEST object will always point to
+ * the physical memory version of the task context. Thus, all subsequent
+ * updates to the task context are performed in the TC table (i.e. DMAable
+ * memory). none
+ */
+void scic_sds_controller_copy_task_context(
+ struct scic_sds_controller *scic,
+ struct scic_sds_request *sci_req)
+{
+ struct scu_task_context *task_context_buffer;
+
+ task_context_buffer = scic_sds_controller_get_task_context_buffer(
+ scic, sci_req->io_tag);
+
+ memcpy(task_context_buffer,
+ sci_req->task_context_buffer,
+ offsetof(struct scu_task_context, sgl_snapshot_ac));
+
+ /*
+ * Now that the soft copy of the TC has been copied into the TC
+ * table accessible by the silicon. Thus, any further changes to
+ * the TC (e.g. TC termination) occur in the appropriate location. */
+ sci_req->task_context_buffer = task_context_buffer;
+}
+
+/**
+ * This method returns the task context buffer for the given io tag.
+ * @scic:
+ * @io_tag:
+ *
+ * struct scu_task_context*
+ */
+struct scu_task_context *scic_sds_controller_get_task_context_buffer(
+ struct scic_sds_controller *scic,
+ u16 io_tag
+ ) {
+ u16 task_index = scic_sds_io_tag_get_index(io_tag);
+
+ if (task_index < scic->task_context_entries) {
+ return &scic->task_context_table[task_index];
+ }
+
+ return NULL;
+}
+
+struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic,
+ u16 io_tag)
+{
+ u16 task_index;
+ u16 task_sequence;
+
+ task_index = scic_sds_io_tag_get_index(io_tag);
+
+ if (task_index < scic->task_context_entries) {
+ if (scic->io_request_table[task_index] != NULL) {
+ task_sequence = scic_sds_io_tag_get_sequence(io_tag);
+
+ if (task_sequence == scic->io_request_sequence[task_index]) {
+ return scic->io_request_table[task_index];
+ }
+ }
+ }
+
+ return NULL;
+}
+
+/**
+ * This method allocates remote node index and the reserves the remote node
+ * context space for use. This method can fail if there are no more remote
+ * node index available.
+ * @scic: This is the controller object which contains the set of
+ * free remote node ids
+ * @sci_dev: This is the device object which is requesting the a remote node
+ * id
+ * @node_id: This is the remote node id that is assinged to the device if one
+ * is available
+ *
+ * enum sci_status SCI_FAILURE_OUT_OF_RESOURCES if there are no available remote
+ * node index available.
+ */
+enum sci_status scic_sds_controller_allocate_remote_node_context(
+ struct scic_sds_controller *scic,
+ struct scic_sds_remote_device *sci_dev,
+ u16 *node_id)
+{
+ u16 node_index;
+ u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev);
+
+ node_index = scic_sds_remote_node_table_allocate_remote_node(
+ &scic->available_remote_nodes, remote_node_count
+ );
+
+ if (node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) {
+ scic->device_table[node_index] = sci_dev;
+
+ *node_id = node_index;
+
+ return SCI_SUCCESS;
+ }
+
+ return SCI_FAILURE_INSUFFICIENT_RESOURCES;
+}
+
+/**
+ * This method frees the remote node index back to the available pool. Once
+ * this is done the remote node context buffer is no longer valid and can
+ * not be used.
+ * @scic:
+ * @sci_dev:
+ * @node_id:
+ *
+ */
+void scic_sds_controller_free_remote_node_context(
+ struct scic_sds_controller *scic,
+ struct scic_sds_remote_device *sci_dev,
+ u16 node_id)
+{
+ u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev);
+
+ if (scic->device_table[node_id] == sci_dev) {
+ scic->device_table[node_id] = NULL;
+
+ scic_sds_remote_node_table_release_remote_node_index(
+ &scic->available_remote_nodes, remote_node_count, node_id
+ );
+ }
+}
+
+/**
+ * This method returns the union scu_remote_node_context for the specified remote
+ * node id.
+ * @scic:
+ * @node_id:
+ *
+ * union scu_remote_node_context*
+ */
+union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer(
+ struct scic_sds_controller *scic,
+ u16 node_id
+ ) {
+ if (
+ (node_id < scic->remote_node_entries)
+ && (scic->device_table[node_id] != NULL)
+ ) {
+ return &scic->remote_node_context_table[node_id];
+ }
+
+ return NULL;
+}
+
+/**
+ *
+ * @resposne_buffer: This is the buffer into which the D2H register FIS will be
+ * constructed.
+ * @frame_header: This is the frame header returned by the hardware.
+ * @frame_buffer: This is the frame buffer returned by the hardware.
+ *
+ * This method will combind the frame header and frame buffer to create a SATA
+ * D2H register FIS none
+ */
+void scic_sds_controller_copy_sata_response(
+ void *response_buffer,
+ void *frame_header,
+ void *frame_buffer)
+{
+ memcpy(response_buffer, frame_header, sizeof(u32));
+
+ memcpy(response_buffer + sizeof(u32),
+ frame_buffer,
+ sizeof(struct dev_to_host_fis) - sizeof(u32));
+}
+
+/**
+ * This method releases the frame once this is done the frame is available for
+ * re-use by the hardware. The data contained in the frame header and frame
+ * buffer is no longer valid. The UF queue get pointer is only updated if UF
+ * control indicates this is appropriate.
+ * @scic:
+ * @frame_index:
+ *
+ */
+void scic_sds_controller_release_frame(
+ struct scic_sds_controller *scic,
+ u32 frame_index)
+{
+ if (scic_sds_unsolicited_frame_control_release_frame(
+ &scic->uf_control, frame_index) == true)
+ writel(scic->uf_control.get,
+ &scic->scu_registers->sdma.unsolicited_frame_get_pointer);
+}
+
+/**
+ * scic_controller_start_io() - This method is called by the SCI user to
+ * send/start an IO request. If the method invocation is successful, then
+ * the IO request has been queued to the hardware for processing.
+ * @controller: the handle to the controller object for which to start an IO
+ * request.
+ * @remote_device: the handle to the remote device object for which to start an
+ * IO request.
+ * @io_request: the handle to the io request object to start.
+ * @io_tag: This parameter specifies a previously allocated IO tag that the
+ * user desires to be utilized for this request. This parameter is optional.
+ * The user is allowed to supply SCI_CONTROLLER_INVALID_IO_TAG as the value
+ * for this parameter.
+ *
+ * - IO tags are a protected resource. It is incumbent upon the SCI Core user
+ * to ensure that each of the methods that may allocate or free available IO
+ * tags are handled in a mutually exclusive manner. This method is one of said
+ * methods requiring proper critical code section protection (e.g. semaphore,
+ * spin-lock, etc.). - For SATA, the user is required to manage NCQ tags. As a
+ * result, it is expected the user will have set the NCQ tag field in the host
+ * to device register FIS prior to calling this method. There is also a
+ * requirement for the user to call scic_stp_io_set_ncq_tag() prior to invoking
+ * the scic_controller_start_io() method. scic_controller_allocate_tag() for
+ * more information on allocating a tag. Indicate if the controller
+ * successfully started the IO request. SCI_SUCCESS if the IO request was
+ * successfully started. Determine the failure situations and return values.
+ */
+enum sci_status scic_controller_start_io(
+ struct scic_sds_controller *scic,
+ struct scic_sds_remote_device *rdev,
+ struct scic_sds_request *req,
+ u16 io_tag)
+{
+ enum sci_status status;
+
+ if (scic->state_machine.current_state_id !=
+ SCI_BASE_CONTROLLER_STATE_READY) {
+ dev_warn(scic_to_dev(scic), "invalid state to start I/O");
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ status = scic_sds_remote_device_start_io(scic, rdev, req);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req;
+ scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(req));
+ return SCI_SUCCESS;
+}
+
+/**
+ * scic_controller_terminate_request() - This method is called by the SCI Core
+ * user to terminate an ongoing (i.e. started) core IO request. This does
+ * not abort the IO request at the target, but rather removes the IO request
+ * from the host controller.
+ * @controller: the handle to the controller object for which to terminate a
+ * request.
+ * @remote_device: the handle to the remote device object for which to
+ * terminate a request.
+ * @request: the handle to the io or task management request object to
+ * terminate.
+ *
+ * Indicate if the controller successfully began the terminate process for the
+ * IO request. SCI_SUCCESS if the terminate process was successfully started
+ * for the request. Determine the failure situations and return values.
+ */
+enum sci_status scic_controller_terminate_request(
+ struct scic_sds_controller *scic,
+ struct scic_sds_remote_device *rdev,
+ struct scic_sds_request *req)
+{
+ enum sci_status status;
+
+ if (scic->state_machine.current_state_id !=
+ SCI_BASE_CONTROLLER_STATE_READY) {
+ dev_warn(scic_to_dev(scic),
+ "invalid state to terminate request\n");
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ status = scic_sds_io_request_terminate(req);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ /*
+ * Utilize the original post context command and or in the POST_TC_ABORT
+ * request sub-type.
+ */
+ scic_sds_controller_post_request(scic,
+ scic_sds_request_get_post_context(req) |
+ SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT);
+ return SCI_SUCCESS;
+}
+
+/**
+ * scic_controller_complete_io() - This method will perform core specific
+ * completion operations for an IO request. After this method is invoked,
+ * the user should consider the IO request as invalid until it is properly
+ * reused (i.e. re-constructed).
+ * @controller: The handle to the controller object for which to complete the
+ * IO request.
+ * @remote_device: The handle to the remote device object for which to complete
+ * the IO request.
+ * @io_request: the handle to the io request object to complete.
+ *
+ * - IO tags are a protected resource. It is incumbent upon the SCI Core user
+ * to ensure that each of the methods that may allocate or free available IO
+ * tags are handled in a mutually exclusive manner. This method is one of said
+ * methods requiring proper critical code section protection (e.g. semaphore,
+ * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI
+ * Core user, using the scic_controller_allocate_io_tag() method, then it is
+ * the responsibility of the caller to invoke the scic_controller_free_io_tag()
+ * method to free the tag (i.e. this method will not free the IO tag). Indicate
+ * if the controller successfully completed the IO request. SCI_SUCCESS if the
+ * completion process was successful.
+ */
+enum sci_status scic_controller_complete_io(
+ struct scic_sds_controller *scic,
+ struct scic_sds_remote_device *rdev,
+ struct scic_sds_request *request)
+{
+ enum sci_status status;
+ u16 index;
+
+ switch (scic->state_machine.current_state_id) {
+ case SCI_BASE_CONTROLLER_STATE_STOPPING:
+ /* XXX: Implement this function */
+ return SCI_FAILURE;
+ case SCI_BASE_CONTROLLER_STATE_READY:
+ status = scic_sds_remote_device_complete_io(scic, rdev, request);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ index = scic_sds_io_tag_get_index(request->io_tag);
+ scic->io_request_table[index] = NULL;
+ return SCI_SUCCESS;
+ default:
+ dev_warn(scic_to_dev(scic), "invalid state to complete I/O");
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+}
+
+enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req)
+{
+ struct scic_sds_controller *scic = sci_req->owning_controller;
+
+ if (scic->state_machine.current_state_id !=
+ SCI_BASE_CONTROLLER_STATE_READY) {
+ dev_warn(scic_to_dev(scic), "invalid state to continue I/O");
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ scic->io_request_table[scic_sds_io_tag_get_index(sci_req->io_tag)] = sci_req;
+ scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(sci_req));
+ return SCI_SUCCESS;
+}
+
+/**
+ * scic_controller_start_task() - This method is called by the SCIC user to
+ * send/start a framework task management request.
+ * @controller: the handle to the controller object for which to start the task
+ * management request.
+ * @remote_device: the handle to the remote device object for which to start
+ * the task management request.
+ * @task_request: the handle to the task request object to start.
+ * @io_tag: This parameter specifies a previously allocated IO tag that the
+ * user desires to be utilized for this request. Note this not the io_tag
+ * of the request being managed. It is to be utilized for the task request
+ * itself. This parameter is optional. The user is allowed to supply
+ * SCI_CONTROLLER_INVALID_IO_TAG as the value for this parameter.
+ *
+ * - IO tags are a protected resource. It is incumbent upon the SCI Core user
+ * to ensure that each of the methods that may allocate or free available IO
+ * tags are handled in a mutually exclusive manner. This method is one of said
+ * methods requiring proper critical code section protection (e.g. semaphore,
+ * spin-lock, etc.). - The user must synchronize this task with completion
+ * queue processing. If they are not synchronized then it is possible for the
+ * io requests that are being managed by the task request can complete before
+ * starting the task request. scic_controller_allocate_tag() for more
+ * information on allocating a tag. Indicate if the controller successfully
+ * started the IO request. SCI_TASK_SUCCESS if the task request was
+ * successfully started. SCI_TASK_FAILURE_REQUIRES_SCSI_ABORT This value is
+ * returned if there is/are task(s) outstanding that require termination or
+ * completion before this request can succeed.
+ */
+enum sci_task_status scic_controller_start_task(
+ struct scic_sds_controller *scic,
+ struct scic_sds_remote_device *rdev,
+ struct scic_sds_request *req,
+ u16 task_tag)
+{
+ enum sci_status status;
+
+ if (scic->state_machine.current_state_id !=
+ SCI_BASE_CONTROLLER_STATE_READY) {
+ dev_warn(scic_to_dev(scic),
+ "%s: SCIC Controller starting task from invalid "
+ "state\n",
+ __func__);
+ return SCI_TASK_FAILURE_INVALID_STATE;
+ }
+
+ status = scic_sds_remote_device_start_task(scic, rdev, req);
+ switch (status) {
+ case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS:
+ scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req;
+
+ /*
+ * We will let framework know this task request started successfully,
+ * although core is still woring on starting the request (to post tc when
+ * RNC is resumed.)
+ */
+ return SCI_SUCCESS;
+ case SCI_SUCCESS:
+ scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req;
+
+ scic_sds_controller_post_request(scic,
+ scic_sds_request_get_post_context(req));
+ break;
+ default:
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * scic_controller_allocate_io_tag() - This method will allocate a tag from the
+ * pool of free IO tags. Direct allocation of IO tags by the SCI Core user
+ * is optional. The scic_controller_start_io() method will allocate an IO
+ * tag if this method is not utilized and the tag is not supplied to the IO
+ * construct routine. Direct allocation of IO tags may provide additional
+ * performance improvements in environments capable of supporting this usage
+ * model. Additionally, direct allocation of IO tags also provides
+ * additional flexibility to the SCI Core user. Specifically, the user may
+ * retain IO tags across the lives of multiple IO requests.
+ * @controller: the handle to the controller object for which to allocate the
+ * tag.
+ *
+ * IO tags are a protected resource. It is incumbent upon the SCI Core user to
+ * ensure that each of the methods that may allocate or free available IO tags
+ * are handled in a mutually exclusive manner. This method is one of said
+ * methods requiring proper critical code section protection (e.g. semaphore,
+ * spin-lock, etc.). An unsigned integer representing an available IO tag.
+ * SCI_CONTROLLER_INVALID_IO_TAG This value is returned if there are no
+ * currently available tags to be allocated. All return other values indicate a
+ * legitimate tag.
+ */
+u16 scic_controller_allocate_io_tag(
+ struct scic_sds_controller *scic)
+{
+ u16 task_context;
+ u16 sequence_count;
+
+ if (!sci_pool_empty(scic->tci_pool)) {
+ sci_pool_get(scic->tci_pool, task_context);
+
+ sequence_count = scic->io_request_sequence[task_context];
+
+ return scic_sds_io_tag_construct(sequence_count, task_context);
+ }
+
+ return SCI_CONTROLLER_INVALID_IO_TAG;
+}
+
+/**
+ * scic_controller_free_io_tag() - This method will free an IO tag to the pool
+ * of free IO tags. This method provides the SCI Core user more flexibility
+ * with regards to IO tags. The user may desire to keep an IO tag after an
+ * IO request has completed, because they plan on re-using the tag for a
+ * subsequent IO request. This method is only legal if the tag was
+ * allocated via scic_controller_allocate_io_tag().
+ * @controller: This parameter specifies the handle to the controller object
+ * for which to free/return the tag.
+ * @io_tag: This parameter represents the tag to be freed to the pool of
+ * available tags.
+ *
+ * - IO tags are a protected resource. It is incumbent upon the SCI Core user
+ * to ensure that each of the methods that may allocate or free available IO
+ * tags are handled in a mutually exclusive manner. This method is one of said
+ * methods requiring proper critical code section protection (e.g. semaphore,
+ * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI
+ * Core user, using the scic_controller_allocate_io_tag() method, then it is
+ * the responsibility of the caller to invoke this method to free the tag. This
+ * method returns an indication of whether the tag was successfully put back
+ * (freed) to the pool of available tags. SCI_SUCCESS This return value
+ * indicates the tag was successfully placed into the pool of available IO
+ * tags. SCI_FAILURE_INVALID_IO_TAG This value is returned if the supplied tag
+ * is not a valid IO tag value.
+ */
+enum sci_status scic_controller_free_io_tag(
+ struct scic_sds_controller *scic,
+ u16 io_tag)
+{
+ u16 sequence;
+ u16 index;
+
+ BUG_ON(io_tag == SCI_CONTROLLER_INVALID_IO_TAG);
+
+ sequence = scic_sds_io_tag_get_sequence(io_tag);
+ index = scic_sds_io_tag_get_index(io_tag);
+
+ if (!sci_pool_full(scic->tci_pool)) {
+ if (sequence == scic->io_request_sequence[index]) {
+ scic_sds_io_sequence_increment(
+ scic->io_request_sequence[index]);
+
+ sci_pool_put(scic->tci_pool, index);
+
+ return SCI_SUCCESS;
+ }
+ }
+
+ return SCI_FAILURE_INVALID_IO_TAG;
+}
+
+
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 13c1c99ef294..1f542c47fb3a 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -52,13 +52,258 @@
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-
#ifndef _SCI_HOST_H_
#define _SCI_HOST_H_
-#include "scic_sds_controller.h"
+#include "scic_config_parameters.h"
#include "remote_device.h"
#include "phy.h"
+#include "pool.h"
+#include "sci_base_state_machine.h"
+#include "remote_node_table.h"
+#include "scu_registers.h"
+#include "scu_unsolicited_frame.h"
+#include "scic_sds_unsolicited_frame_control.h"
+#include "scic_sds_port_configuration_agent.h"
+
+struct scic_sds_request;
+struct scu_task_context;
+
+/**
+ * struct scic_power_control -
+ *
+ * This structure defines the fields for managing power control for direct
+ * attached disk devices.
+ */
+struct scic_power_control {
+ /**
+ * This field is set when the power control timer is running and cleared when
+ * it is not.
+ */
+ bool timer_started;
+
+ /**
+ * This field is the handle to the driver timer object. This timer is used to
+ * control when the directed attached disks can consume power.
+ */
+ void *timer;
+
+ /**
+ * This field is used to keep track of how many phys are put into the
+ * requesters field.
+ */
+ u8 phys_waiting;
+
+ /**
+ * This field is used to keep track of how many phys have been granted to consume power
+ */
+ u8 phys_granted_power;
+
+ /**
+ * This field is an array of phys that we are waiting on. The phys are direct
+ * mapped into requesters via struct scic_sds_phy.phy_index
+ */
+ struct scic_sds_phy *requesters[SCI_MAX_PHYS];
+
+};
+
+/**
+ * struct scic_sds_controller -
+ *
+ * This structure represents the SCU controller object.
+ */
+struct scic_sds_controller {
+ /**
+ * This field contains the information for the base controller state
+ * machine.
+ */
+ struct sci_base_state_machine state_machine;
+
+ /**
+ * This field is the driver timer object handler used to time the controller
+ * object start and stop requests.
+ */
+ void *timeout_timer;
+
+ /**
+ * This field contains the user parameters to be utilized for this
+ * core controller object.
+ */
+ union scic_user_parameters user_parameters;
+
+ /**
+ * This field contains the OEM parameters to be utilized for this
+ * core controller object.
+ */
+ union scic_oem_parameters oem_parameters;
+
+ /**
+ * This field contains the port configuration agent for this controller.
+ */
+ struct scic_sds_port_configuration_agent port_agent;
+
+ /**
+ * This field is the array of device objects that are currently constructed
+ * for this controller object. This table is used as a fast lookup of device
+ * objects that need to handle device completion notifications from the
+ * hardware. The table is RNi based.
+ */
+ struct scic_sds_remote_device *device_table[SCI_MAX_REMOTE_DEVICES];
+
+ /**
+ * This field is the array of IO request objects that are currently active for
+ * this controller object. This table is used as a fast lookup of the io
+ * request object that need to handle completion queue notifications. The
+ * table is TCi based.
+ */
+ struct scic_sds_request *io_request_table[SCI_MAX_IO_REQUESTS];
+
+ /**
+ * This field is the free RNi data structure
+ */
+ struct scic_remote_node_table available_remote_nodes;
+
+ /**
+ * This field is the TCi pool used to manage the task context index.
+ */
+ SCI_POOL_CREATE(tci_pool, u16, SCI_MAX_IO_REQUESTS);
+
+ /**
+ * This filed is the struct scic_power_control data used to controll when direct
+ * attached devices can consume power.
+ */
+ struct scic_power_control power_control;
+
+ /**
+ * This field is the array of sequence values for the IO Tag fields. Even
+ * though only 4 bits of the field is used for the sequence the sequence is 16
+ * bits in size so the sequence can be bitwise or'd with the TCi to build the
+ * IO Tag value.
+ */
+ u16 io_request_sequence[SCI_MAX_IO_REQUESTS];
+
+ /**
+ * This field in the array of sequence values for the RNi. These are used
+ * to control io request build to io request start operations. The sequence
+ * value is recorded into an io request when it is built and is checked on
+ * the io request start operation to make sure that there was not a device
+ * hot plug between the build and start operation.
+ */
+ u8 remote_device_sequence[SCI_MAX_REMOTE_DEVICES];
+
+ /**
+ * This field is a pointer to the memory allocated by the driver for the task
+ * context table. This data is shared between the hardware and software.
+ */
+ struct scu_task_context *task_context_table;
+
+ /**
+ * This field is a pointer to the memory allocated by the driver for the
+ * remote node context table. This table is shared between the hardware and
+ * software.
+ */
+ union scu_remote_node_context *remote_node_context_table;
+
+ /**
+ * This field is a pointer to the completion queue. This memory is
+ * written to by the hardware and read by the software.
+ */
+ u32 *completion_queue;
+
+ /**
+ * This field is the software copy of the completion queue get pointer. The
+ * controller object writes this value to the hardware after processing the
+ * completion entries.
+ */
+ u32 completion_queue_get;
+
+ /**
+ * This field is the minimum of the number of hardware supported port entries
+ * and the software requested port entries.
+ */
+ u32 logical_port_entries;
+
+ /**
+ * This field is the minimum number of hardware supported completion queue
+ * entries and the software requested completion queue entries.
+ */
+ u32 completion_queue_entries;
+
+ /**
+ * This field is the minimum number of hardware supported event entries and
+ * the software requested event entries.
+ */
+ u32 completion_event_entries;
+
+ /**
+ * This field is the minimum number of devices supported by the hardware and
+ * the number of devices requested by the software.
+ */
+ u32 remote_node_entries;
+
+ /**
+ * This field is the minimum number of IO requests supported by the hardware
+ * and the number of IO requests requested by the software.
+ */
+ u32 task_context_entries;
+
+ /**
+ * This object contains all of the unsolicited frame specific
+ * data utilized by the core controller.
+ */
+ struct scic_sds_unsolicited_frame_control uf_control;
+
+ /* Phy Startup Data */
+ /**
+ * This field is the driver timer handle for controller phy request startup.
+ * On controller start the controller will start each PHY individually in
+ * order of phy index.
+ */
+ void *phy_startup_timer;
+
+ /**
+ * This field is set when the phy_startup_timer is running and is cleared when
+ * the phy_startup_timer is stopped.
+ */
+ bool phy_startup_timer_pending;
+
+ /**
+ * This field is the index of the next phy start. It is initialized to 0 and
+ * increments for each phy index that is started.
+ */
+ u32 next_phy_to_start;
+
+ /**
+ * This field controlls the invalid link up notifications to the SCI_USER. If
+ * an invalid_link_up notification is reported a bit for the PHY index is set
+ * so further notifications are not made. Once the PHY object reports link up
+ * and is made part of a port then this bit for the PHY index is cleared.
+ */
+ u8 invalid_phy_mask;
+
+ /*
+ * This field saves the current interrupt coalescing number of the controller.
+ */
+ u16 interrupt_coalesce_number;
+
+ /*
+ * This field saves the current interrupt coalescing timeout value in microseconds.
+ */
+ u32 interrupt_coalesce_timeout;
+
+ /**
+ * This field is a pointer to the memory mapped register space for the
+ * struct smu_registers.
+ */
+ struct smu_registers __iomem *smu_registers;
+
+ /**
+ * This field is a pointer to the memory mapped register space for the
+ * struct scu_registers.
+ */
+ struct scu_registers __iomem *scu_registers;
+
+};
struct isci_host {
struct scic_sds_controller sci;
@@ -93,6 +338,96 @@ struct isci_host {
};
/**
+ * enum scic_sds_controller_states - This enumeration depicts all the states
+ * for the common controller state machine.
+ */
+enum scic_sds_controller_states {
+ /**
+ * Simply the initial state for the base controller state machine.
+ */
+ SCI_BASE_CONTROLLER_STATE_INITIAL = 0,
+
+ /**
+ * This state indicates that the controller is reset. The memory for
+ * the controller is in it's initial state, but the controller requires
+ * initialization.
+ * This state is entered from the INITIAL state.
+ * This state is entered from the RESETTING state.
+ */
+ SCI_BASE_CONTROLLER_STATE_RESET,
+
+ /**
+ * This state is typically an action state that indicates the controller
+ * is in the process of initialization. In this state no new IO operations
+ * are permitted.
+ * This state is entered from the RESET state.
+ */
+ SCI_BASE_CONTROLLER_STATE_INITIALIZING,
+
+ /**
+ * This state indicates that the controller has been successfully
+ * initialized. In this state no new IO operations are permitted.
+ * This state is entered from the INITIALIZING state.
+ */
+ SCI_BASE_CONTROLLER_STATE_INITIALIZED,
+
+ /**
+ * This state indicates the the controller is in the process of becoming
+ * ready (i.e. starting). In this state no new IO operations are permitted.
+ * This state is entered from the INITIALIZED state.
+ */
+ SCI_BASE_CONTROLLER_STATE_STARTING,
+
+ /**
+ * This state indicates the controller is now ready. Thus, the user
+ * is able to perform IO operations on the controller.
+ * This state is entered from the STARTING state.
+ */
+ SCI_BASE_CONTROLLER_STATE_READY,
+
+ /**
+ * This state is typically an action state that indicates the controller
+ * is in the process of resetting. Thus, the user is unable to perform
+ * IO operations on the controller. A reset is considered destructive in
+ * most cases.
+ * This state is entered from the READY state.
+ * This state is entered from the FAILED state.
+ * This state is entered from the STOPPED state.
+ */
+ SCI_BASE_CONTROLLER_STATE_RESETTING,
+
+ /**
+ * This state indicates that the controller is in the process of stopping.
+ * In this state no new IO operations are permitted, but existing IO
+ * operations are allowed to complete.
+ * This state is entered from the READY state.
+ */
+ SCI_BASE_CONTROLLER_STATE_STOPPING,
+
+ /**
+ * This state indicates that the controller has successfully been stopped.
+ * In this state no new IO operations are permitted.
+ * This state is entered from the STOPPING state.
+ */
+ SCI_BASE_CONTROLLER_STATE_STOPPED,
+
+ /**
+ * This state indicates that the controller could not successfully be
+ * initialized. In this state no new IO operations are permitted.
+ * This state is entered from the INITIALIZING state.
+ * This state is entered from the STARTING state.
+ * This state is entered from the STOPPING state.
+ * This state is entered from the RESETTING state.
+ */
+ SCI_BASE_CONTROLLER_STATE_FAILED,
+
+ SCI_BASE_CONTROLLER_MAX_STATES
+
+};
+
+
+
+/**
* struct isci_pci_info - This class represents the pci function containing the
* controllers. Depending on PCI SKU, there could be up to 2 controllers in
* the PCI function.
@@ -115,17 +450,13 @@ static inline struct isci_pci_info *to_pci_info(struct pci_dev *pdev)
id < ARRAY_SIZE(to_pci_info(pdev)->hosts) && ihost; \
ihost = to_pci_info(pdev)->hosts[++id])
-static inline
-enum isci_status isci_host_get_state(
- struct isci_host *isci_host)
+static inline enum isci_status isci_host_get_state(struct isci_host *isci_host)
{
return isci_host->status;
}
-
-static inline void isci_host_change_state(
- struct isci_host *isci_host,
- enum isci_status status)
+static inline void isci_host_change_state(struct isci_host *isci_host,
+ enum isci_status status)
{
unsigned long flags;
@@ -140,9 +471,7 @@ static inline void isci_host_change_state(
}
-static inline int isci_host_can_queue(
- struct isci_host *isci_host,
- int num)
+static inline int isci_host_can_queue(struct isci_host *isci_host, int num)
{
int ret = 0;
unsigned long flags;
@@ -163,9 +492,7 @@ static inline int isci_host_can_queue(
return ret;
}
-static inline void isci_host_can_dequeue(
- struct isci_host *isci_host,
- int num)
+static inline void isci_host_can_dequeue(struct isci_host *isci_host, int num)
{
unsigned long flags;
@@ -208,39 +535,219 @@ static inline struct isci_host *scic_to_ihost(struct scic_sds_controller *scic)
}
/**
- * isci_host_scan_finished() -
+ * INCREMENT_QUEUE_GET() -
*
- * This function is one of the SCSI Host Template functions. The SCSI midlayer
- * calls this function during a target scan, approx. once every 10 millisecs.
+ * This macro will increment the specified index to and if the index wraps to 0
+ * it will toggel the cycle bit.
*/
-int isci_host_scan_finished(
- struct Scsi_Host *,
- unsigned long);
+#define INCREMENT_QUEUE_GET(index, cycle, entry_count, bit_toggle) \
+ { \
+ if ((index) + 1 == entry_count) { \
+ (index) = 0; \
+ (cycle) = (cycle) ^ (bit_toggle); \
+ } else { \
+ index = index + 1; \
+ } \
+ }
+/**
+ * scic_sds_controller_get_port_configuration_agent() -
+ *
+ * This is a helper macro to get the port configuration agent from the
+ * controller object.
+ */
+#define scic_sds_controller_get_port_configuration_agent(controller) \
+ (&(controller)->port_agent)
/**
- * isci_host_scan_start() -
+ * scic_sds_controller_get_protocol_engine_group() -
*
- * This function is one of the SCSI Host Template function, called by the SCSI
- * mid layer berfore a target scan begins. The core library controller start
- * routine is called from here.
+ * This macro returns the protocol engine group for this controller object.
+ * Presently we only support protocol engine group 0 so just return that
*/
-void isci_host_scan_start(
- struct Scsi_Host *);
+#define scic_sds_controller_get_protocol_engine_group(controller) 0
/**
- * isci_host_start_complete() -
+ * scic_sds_io_tag_construct() -
*
- * This function is called by the core library, through the ISCI Module, to
- * indicate controller start status.
+ * This macro constructs an IO tag from the sequence and index values.
*/
-void isci_host_start_complete(
- struct isci_host *,
- enum sci_status);
+#define scic_sds_io_tag_construct(sequence, task_index) \
+ ((sequence) << 12 | (task_index))
-void isci_host_stop_complete(
- struct isci_host *isci_host,
- enum sci_status completion_status);
+/**
+ * scic_sds_io_tag_get_sequence() -
+ *
+ * This macro returns the IO sequence from the IO tag value.
+ */
+#define scic_sds_io_tag_get_sequence(io_tag) \
+ (((io_tag) & 0xF000) >> 12)
+
+/**
+ * scic_sds_io_tag_get_index() -
+ *
+ * This macro returns the TCi from the io tag value
+ */
+#define scic_sds_io_tag_get_index(io_tag) \
+ ((io_tag) & 0x0FFF)
+
+/**
+ * scic_sds_io_sequence_increment() -
+ *
+ * This is a helper macro to increment the io sequence count. We may find in
+ * the future that it will be faster to store the sequence count in such a way
+ * as we dont perform the shift operation to build io tag values so therefore
+ * need a way to incrment them correctly
+ */
+#define scic_sds_io_sequence_increment(value) \
+ ((value) = (((value) + 1) & 0x000F))
+
+/* expander attached sata devices require 3 rnc slots */
+static inline int scic_sds_remote_device_node_count(struct scic_sds_remote_device *sci_dev)
+{
+ struct domain_device *dev = sci_dev_to_domain(sci_dev);
+
+ if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) &&
+ !sci_dev->is_direct_attached)
+ return SCU_STP_REMOTE_NODE_COUNT;
+ return SCU_SSP_REMOTE_NODE_COUNT;
+}
+
+/**
+ * scic_sds_controller_set_invalid_phy() -
+ *
+ * This macro will set the bit in the invalid phy mask for this controller
+ * object. This is used to control messages reported for invalid link up
+ * notifications.
+ */
+#define scic_sds_controller_set_invalid_phy(controller, phy) \
+ ((controller)->invalid_phy_mask |= (1 << (phy)->phy_index))
+
+/**
+ * scic_sds_controller_clear_invalid_phy() -
+ *
+ * This macro will clear the bit in the invalid phy mask for this controller
+ * object. This is used to control messages reported for invalid link up
+ * notifications.
+ */
+#define scic_sds_controller_clear_invalid_phy(controller, phy) \
+ ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index))
+
+static inline struct device *scic_to_dev(struct scic_sds_controller *scic)
+{
+ return &scic_to_ihost(scic)->pdev->dev;
+}
+
+static inline struct device *sciphy_to_dev(struct scic_sds_phy *sci_phy)
+{
+ struct isci_phy *iphy = sci_phy_to_iphy(sci_phy);
+
+ if (!iphy || !iphy->isci_port || !iphy->isci_port->isci_host)
+ return NULL;
+
+ return &iphy->isci_port->isci_host->pdev->dev;
+}
+
+static inline struct device *sciport_to_dev(struct scic_sds_port *sci_port)
+{
+ struct isci_port *iport = sci_port_to_iport(sci_port);
+
+ if (!iport || !iport->isci_host)
+ return NULL;
+
+ return &iport->isci_host->pdev->dev;
+}
+
+static inline struct device *scirdev_to_dev(struct scic_sds_remote_device *sci_dev)
+{
+ struct isci_remote_device *idev =
+ container_of(sci_dev, typeof(*idev), sci);
+
+ if (!idev || !idev->isci_port || !idev->isci_port->isci_host)
+ return NULL;
+
+ return &idev->isci_port->isci_host->pdev->dev;
+}
+
+enum {
+ ISCI_SI_REVA0,
+ ISCI_SI_REVA2,
+ ISCI_SI_REVB0,
+};
+
+extern int isci_si_rev;
+
+static inline bool is_a0(void)
+{
+ return isci_si_rev == ISCI_SI_REVA0;
+}
+
+static inline bool is_a2(void)
+{
+ return isci_si_rev == ISCI_SI_REVA2;
+}
+
+static inline bool is_b0(void)
+{
+ return isci_si_rev > ISCI_SI_REVA2;
+}
+
+void scic_sds_controller_post_request(struct scic_sds_controller *scic,
+ u32 request);
+void scic_sds_controller_release_frame(struct scic_sds_controller *scic,
+ u32 frame_index);
+void scic_sds_controller_copy_sata_response(void *response_buffer,
+ void *frame_header,
+ void *frame_buffer);
+enum sci_status scic_sds_controller_allocate_remote_node_context(struct scic_sds_controller *scic,
+ struct scic_sds_remote_device *sci_dev,
+ u16 *node_id);
+void scic_sds_controller_free_remote_node_context(
+ struct scic_sds_controller *scic,
+ struct scic_sds_remote_device *sci_dev,
+ u16 node_id);
+union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer(
+ struct scic_sds_controller *scic,
+ u16 node_id);
+
+struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic,
+ u16 io_tag);
+
+struct scu_task_context *scic_sds_controller_get_task_context_buffer(
+ struct scic_sds_controller *scic,
+ u16 io_tag);
+
+void scic_sds_controller_power_control_queue_insert(
+ struct scic_sds_controller *scic,
+ struct scic_sds_phy *sci_phy);
+
+void scic_sds_controller_power_control_queue_remove(
+ struct scic_sds_controller *scic,
+ struct scic_sds_phy *sci_phy);
+
+void scic_sds_controller_link_up(
+ struct scic_sds_controller *scic,
+ struct scic_sds_port *sci_port,
+ struct scic_sds_phy *sci_phy);
+
+void scic_sds_controller_link_down(
+ struct scic_sds_controller *scic,
+ struct scic_sds_port *sci_port,
+ struct scic_sds_phy *sci_phy);
+
+void scic_sds_controller_remote_device_stopped(
+ struct scic_sds_controller *scic,
+ struct scic_sds_remote_device *sci_dev);
+
+void scic_sds_controller_copy_task_context(
+ struct scic_sds_controller *scic,
+ struct scic_sds_request *this_request);
+
+void scic_sds_controller_register_setup(struct scic_sds_controller *scic);
+
+enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req);
+int isci_host_scan_finished(struct Scsi_Host *, unsigned long);
+void isci_host_scan_start(struct Scsi_Host *);
int isci_host_init(struct isci_host *);
@@ -262,4 +769,35 @@ void isci_host_remote_device_start_complete(
struct isci_remote_device *,
enum sci_status);
-#endif /* !defined(_SCI_HOST_H_) */
+void scic_controller_disable_interrupts(
+ struct scic_sds_controller *scic);
+
+enum sci_status scic_controller_start_io(
+ struct scic_sds_controller *scic,
+ struct scic_sds_remote_device *remote_device,
+ struct scic_sds_request *io_request,
+ u16 io_tag);
+
+enum sci_task_status scic_controller_start_task(
+ struct scic_sds_controller *scic,
+ struct scic_sds_remote_device *remote_device,
+ struct scic_sds_request *task_request,
+ u16 io_tag);
+
+enum sci_status scic_controller_terminate_request(
+ struct scic_sds_controller *scic,
+ struct scic_sds_remote_device *remote_device,
+ struct scic_sds_request *request);
+
+enum sci_status scic_controller_complete_io(
+ struct scic_sds_controller *scic,
+ struct scic_sds_remote_device *remote_device,
+ struct scic_sds_request *io_request);
+
+u16 scic_controller_allocate_io_tag(
+ struct scic_sds_controller *scic);
+
+enum sci_status scic_controller_free_io_tag(
+ struct scic_sds_controller *scic,
+ u16 io_tag);
+#endif
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index df132c07badf..bda701655b25 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -61,9 +61,7 @@
#include <asm/string.h>
#include "isci.h"
#include "task.h"
-#include "sci_environment.h"
#include "probe_roms.h"
-#include "scic_controller.h"
static struct scsi_transport_template *isci_transport_template;
diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h
index 800f2332ecd0..d288897b85fb 100644
--- a/drivers/scsi/isci/isci.h
+++ b/drivers/scsi/isci/isci.h
@@ -532,10 +532,4 @@ extern unsigned char max_concurr_spinup;
irqreturn_t isci_msix_isr(int vec, void *data);
irqreturn_t isci_intx_isr(int vec, void *data);
irqreturn_t isci_error_isr(int vec, void *data);
-
-struct scic_sds_controller;
-bool scic_sds_controller_isr(struct scic_sds_controller *scic);
-void scic_sds_controller_completion_handler(struct scic_sds_controller *scic);
-bool scic_sds_controller_error_isr(struct scic_sds_controller *scic);
-void scic_sds_controller_error_handler(struct scic_sds_controller *scic);
#endif /* __ISCI_H__ */
diff --git a/drivers/scsi/isci/core/sci_pool.h b/drivers/scsi/isci/pool.h
index 016ec832f74f..016ec832f74f 100644
--- a/drivers/scsi/isci/core/sci_pool.h
+++ b/drivers/scsi/isci/pool.h
diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c
index 35e2e517f671..f44fa20cad96 100644
--- a/drivers/scsi/isci/port.c
+++ b/drivers/scsi/isci/port.c
@@ -53,13 +53,6 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/**
- * This file contains the isci port implementation.
- *
- *
- */
-
-
#include <linux/workqueue.h>
#include "isci.h"
#include "scic_io_request.h"
@@ -68,7 +61,6 @@
#include "scic_port.h"
#include "port.h"
#include "request.h"
-#include "core/scic_sds_controller.h"
static void isci_port_change_state(struct isci_port *iport, enum isci_status status)
{
diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c
index 705517440441..9bc173fa49e1 100644
--- a/drivers/scsi/isci/probe_roms.c
+++ b/drivers/scsi/isci/probe_roms.c
@@ -32,7 +32,6 @@
#include "isci.h"
#include "task.h"
-#include "sci_environment.h"
#include "probe_roms.h"
struct efi_variable {
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index 8b1ef19a6732..00334b9ccd80 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -57,16 +57,13 @@
#include "port.h"
#include "remote_device.h"
#include "request.h"
-#include "scic_controller.h"
#include "scic_io_request.h"
#include "scic_phy.h"
#include "scic_port.h"
-#include "scic_sds_controller.h"
#include "scic_sds_phy.h"
#include "scic_sds_port.h"
#include "remote_node_context.h"
#include "scic_sds_request.h"
-#include "sci_environment.h"
#include "sci_util.h"
#include "scu_event_codes.h"
#include "task.h"
diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c
index 5e85a18a06de..af4759383db4 100644
--- a/drivers/scsi/isci/remote_node_context.c
+++ b/drivers/scsi/isci/remote_node_context.c
@@ -53,12 +53,11 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include "host.h"
#include "sci_base_state_machine.h"
-#include "scic_sds_controller.h"
#include "scic_sds_port.h"
#include "remote_device.h"
#include "remote_node_context.h"
-#include "sci_environment.h"
#include "sci_util.h"
#include "scu_event_codes.h"
#include "scu_task_context.h"
diff --git a/drivers/scsi/isci/remote_node_table.c b/drivers/scsi/isci/remote_node_table.c
index 8886146d9db2..80f44c25f45f 100644
--- a/drivers/scsi/isci/remote_node_table.c
+++ b/drivers/scsi/isci/remote_node_table.c
@@ -60,7 +60,6 @@
*
*/
#include "sci_util.h"
-#include "sci_environment.h"
#include "remote_node_table.h"
#include "remote_node_context.h"
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index a58072807a37..4961ee347091 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -62,7 +62,6 @@
#include "sata.h"
#include "scu_completion_codes.h"
#include "scic_sds_request.h"
-#include "scic_controller.h"
#include "sas.h"
static enum sci_status isci_request_ssp_request_construct(
diff --git a/drivers/scsi/isci/sci_environment.h b/drivers/scsi/isci/sci_environment.h
deleted file mode 100644
index 30addba4d43a..000000000000
--- a/drivers/scsi/isci/sci_environment.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _SCI_ENVIRONMENT_H_
-#define _SCI_ENVIRONMENT_H_
-
-#include "host.h"
-
-
-static inline struct device *scic_to_dev(struct scic_sds_controller *scic)
-{
- return &scic_to_ihost(scic)->pdev->dev;
-}
-
-static inline struct device *sciphy_to_dev(struct scic_sds_phy *sci_phy)
-{
- struct isci_phy *iphy = sci_phy_to_iphy(sci_phy);
-
- if (!iphy || !iphy->isci_port || !iphy->isci_port->isci_host)
- return NULL;
-
- return &iphy->isci_port->isci_host->pdev->dev;
-}
-
-static inline struct device *sciport_to_dev(struct scic_sds_port *sci_port)
-{
- struct isci_port *iport = sci_port_to_iport(sci_port);
-
- if (!iport || !iport->isci_host)
- return NULL;
-
- return &iport->isci_host->pdev->dev;
-}
-
-static inline struct device *scirdev_to_dev(
- struct scic_sds_remote_device *sci_dev)
-{
- struct isci_remote_device *idev =
- container_of(sci_dev, typeof(*idev), sci);
-
- if (!idev || !idev->isci_port || !idev->isci_port->isci_host)
- return NULL;
-
- return &idev->isci_port->isci_host->pdev->dev;
-}
-
-enum {
- ISCI_SI_REVA0,
- ISCI_SI_REVA2,
- ISCI_SI_REVB0,
-};
-
-extern int isci_si_rev;
-
-static inline bool is_a0(void)
-{
- return isci_si_rev == ISCI_SI_REVA0;
-}
-
-static inline bool is_a2(void)
-{
- return isci_si_rev == ISCI_SI_REVA2;
-}
-
-static inline bool is_b0(void)
-{
- return isci_si_rev > ISCI_SI_REVA2;
-}
-
-#endif
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 597c49020ac8..2a8603881929 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -65,7 +65,6 @@
#include "sata.h"
#include "task.h"
#include "scic_sds_request.h"
-#include "scic_controller.h"
#include "timers.h"
/**