diff options
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c | 36 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.c | 48 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.h | 12 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 36 |
6 files changed, 76 insertions, 68 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index 87c5bea6c2a2..907fe2e927f0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -349,6 +349,11 @@ config DWMAC_VISCONTI endif +config STMMAC_LIBPCI + tristate + help + This option enables the PCI bus helpers for the stmmac driver. + config DWMAC_INTEL tristate "Intel GMAC support" default X86 @@ -362,16 +367,18 @@ config DWMAC_INTEL config DWMAC_LOONGSON tristate "Loongson PCI DWMAC support" default MACH_LOONGSON64 - depends on (MACH_LOONGSON64 || COMPILE_TEST) && STMMAC_ETH && PCI + depends on (MACH_LOONGSON64 || COMPILE_TEST) && PCI depends on COMMON_CLK + select STMMAC_LIBPCI help This selects the LOONGSON PCI bus support for the stmmac driver, Support for ethernet controller on Loongson-2K1000 SoC and LS7A1000 bridge. config STMMAC_PCI tristate "STMMAC PCI bus support" - depends on STMMAC_ETH && PCI + depends on PCI depends on COMMON_CLK + select STMMAC_LIBPCI help This selects the platform specific bus support for the stmmac driver. This driver was tested on XLINX XC2V3000 FF1152AMT0221 diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile index 1681a8a28313..7bf528731034 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Makefile +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_DWMAC_VISCONTI) += dwmac-visconti.o stmmac-platform-objs:= stmmac_platform.o dwmac-altr-socfpga-objs := dwmac-socfpga.o +obj-$(CONFIG_STMMAC_LIBPCI) += stmmac_libpci.o obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o obj-$(CONFIG_DWMAC_INTEL) += dwmac-intel.o obj-$(CONFIG_DWMAC_LOONGSON) += dwmac-loongson.o diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c index 5f9472f47e35..107a7c84ace8 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c @@ -8,6 +8,7 @@ #include <linux/device.h> #include <linux/of_irq.h> #include "stmmac.h" +#include "stmmac_libpci.h" #include "dwmac_dma.h" #include "dwmac1000.h" @@ -502,37 +503,6 @@ static int loongson_dwmac_fix_reset(struct stmmac_priv *priv, void __iomem *ioad 10000, 2000000); } -static int loongson_dwmac_suspend(struct device *dev, void *bsp_priv) -{ - struct pci_dev *pdev = to_pci_dev(dev); - int ret; - - ret = pci_save_state(pdev); - if (ret) - return ret; - - pci_disable_device(pdev); - pci_wake_from_d3(pdev, true); - return 0; -} - -static int loongson_dwmac_resume(struct device *dev, void *bsp_priv) -{ - struct pci_dev *pdev = to_pci_dev(dev); - int ret; - - pci_restore_state(pdev); - pci_set_power_state(pdev, PCI_D0); - - ret = pci_enable_device(pdev); - if (ret) - return ret; - - pci_set_master(pdev); - - return 0; -} - static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct plat_stmmacenet_data *plat; @@ -577,8 +547,8 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id plat->bsp_priv = ld; plat->mac_setup = loongson_dwmac_setup; plat->fix_soc_reset = loongson_dwmac_fix_reset; - plat->suspend = loongson_dwmac_suspend; - plat->resume = loongson_dwmac_resume; + plat->suspend = stmmac_pci_plat_suspend; + plat->resume = stmmac_pci_plat_resume; ld->dev = &pdev->dev; ld->loongson_id = readl(res.addr + GMAC_VERSION) & 0xff; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.c new file mode 100644 index 000000000000..5c5dd502f79a --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.c @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * PCI bus helpers for STMMAC driver + * Copyright (C) 2025 Yao Zi <ziyao@disroot.org> + */ + +#include <linux/device.h> +#include <linux/pci.h> + +#include "stmmac_libpci.h" + +int stmmac_pci_plat_suspend(struct device *dev, void *bsp_priv) +{ + struct pci_dev *pdev = to_pci_dev(dev); + int ret; + + ret = pci_save_state(pdev); + if (ret) + return ret; + + pci_disable_device(pdev); + pci_wake_from_d3(pdev, true); + + return 0; +} +EXPORT_SYMBOL_GPL(stmmac_pci_plat_suspend); + +int stmmac_pci_plat_resume(struct device *dev, void *bsp_priv) +{ + struct pci_dev *pdev = to_pci_dev(dev); + int ret; + + pci_restore_state(pdev); + pci_set_power_state(pdev, PCI_D0); + + ret = pci_enable_device(pdev); + if (ret) + return ret; + + pci_set_master(pdev); + + return 0; +} +EXPORT_SYMBOL_GPL(stmmac_pci_plat_resume); + +MODULE_DESCRIPTION("STMMAC PCI helper library"); +MODULE_AUTHOR("Yao Zi <ziyao@disroot.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.h new file mode 100644 index 000000000000..71553184f982 --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_libpci.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2025 Yao Zi <ziyao@disroot.org> + */ + +#ifndef __STMMAC_LIBPCI_H__ +#define __STMMAC_LIBPCI_H__ + +int stmmac_pci_plat_suspend(struct device *dev, void *bsp_priv); +int stmmac_pci_plat_resume(struct device *dev, void *bsp_priv); + +#endif /* __STMMAC_LIBPCI_H__ */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index afb1c53ca6f8..270ad066ced3 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -14,6 +14,7 @@ #include <linux/dmi.h> #include "stmmac.h" +#include "stmmac_libpci.h" struct stmmac_pci_info { int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat); @@ -102,37 +103,6 @@ static const struct stmmac_pci_info snps_gmac5_pci_info = { .setup = snps_gmac5_default_data, }; -static int stmmac_pci_suspend(struct device *dev, void *bsp_priv) -{ - struct pci_dev *pdev = to_pci_dev(dev); - int ret; - - ret = pci_save_state(pdev); - if (ret) - return ret; - - pci_disable_device(pdev); - pci_wake_from_d3(pdev, true); - return 0; -} - -static int stmmac_pci_resume(struct device *dev, void *bsp_priv) -{ - struct pci_dev *pdev = to_pci_dev(dev); - int ret; - - pci_restore_state(pdev); - pci_set_power_state(pdev, PCI_D0); - - ret = pci_enable_device(pdev); - if (ret) - return ret; - - pci_set_master(pdev); - - return 0; -} - /** * stmmac_pci_probe * @@ -212,8 +182,8 @@ static int stmmac_pci_probe(struct pci_dev *pdev, plat->safety_feat_cfg->prtyen = 1; plat->safety_feat_cfg->tmouten = 1; - plat->suspend = stmmac_pci_suspend; - plat->resume = stmmac_pci_resume; + plat->suspend = stmmac_pci_plat_suspend; + plat->resume = stmmac_pci_plat_resume; return stmmac_dvr_probe(&pdev->dev, plat, &res); } |