diff options
4 files changed, 265 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index 2ac709a4c472..fc62fb2a68ac 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -10,6 +10,21 @@ maintainers: - Chen-Yu Tsai <wens@csie.org> - Maxime Ripard <mripard@kernel.org> +# We need a select here so we don't match all nodes with 'snps,dwmac' +select: + properties: + compatible: + contains: + enum: + - allwinner,sun8i-a83t-emac + - allwinner,sun8i-h3-emac + - allwinner,sun8i-r40-gmac + - allwinner,sun8i-v3s-emac + - allwinner,sun50i-a64-emac + - allwinner,sun55i-a523-gmac200 + required: + - compatible + properties: compatible: oneOf: @@ -26,6 +41,9 @@ properties: - allwinner,sun50i-h616-emac0 - allwinner,sun55i-a523-gmac0 - const: allwinner,sun50i-a64-emac + - items: + - const: allwinner,sun55i-a523-gmac200 + - const: snps,dwmac-4.20a reg: maxItems: 1 @@ -37,14 +55,21 @@ properties: const: macirq clocks: - maxItems: 1 + minItems: 1 + maxItems: 2 clock-names: - const: stmmaceth + minItems: 1 + items: + - const: stmmaceth + - const: mbus phy-supply: description: PHY regulator + power-domains: + maxItems: 1 + syscon: $ref: /schemas/types.yaml#/definitions/phandle description: @@ -191,6 +216,42 @@ allOf: - mdio-parent-bus - mdio@1 + - if: + properties: + compatible: + contains: + const: allwinner,sun55i-a523-gmac200 + then: + properties: + clocks: + minItems: 2 + clock-names: + minItems: 2 + tx-internal-delay-ps: + default: 0 + minimum: 0 + maximum: 700 + multipleOf: 100 + description: + External RGMII PHY TX clock delay chain value in ps. + rx-internal-delay-ps: + default: 0 + minimum: 0 + maximum: 3100 + multipleOf: 100 + description: + External RGMII PHY TX clock delay chain value in ps. + required: + - power-domains + else: + properties: + clocks: + maxItems: 1 + clock-names: + maxItems: 1 + power-domains: false + + unevaluatedProperties: false examples: @@ -323,4 +384,34 @@ examples: }; }; + - | + ethernet@4510000 { + compatible = "allwinner,sun55i-a523-gmac200", + "snps,dwmac-4.20a"; + reg = <0x04510000 0x10000>; + clocks = <&ccu 117>, <&ccu 79>; + clock-names = "stmmaceth", "mbus"; + resets = <&ccu 43>; + reset-names = "stmmaceth"; + interrupts = <0 47 4>; + interrupt-names = "macirq"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins>; + power-domains = <&pck600 4>; + syscon = <&syscon>; + phy-handle = <&ext_rgmii_phy_1>; + phy-mode = "rgmii-id"; + snps,fixed-burst; + snps,axi-config = <&gmac1_stmmac_axi_setup>; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ext_rgmii_phy_1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; ... diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index 91d9a14362bf..9507131875b2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -265,6 +265,18 @@ config DWMAC_SUN8I stmmac device driver. This driver is used for H3/A83T/A64 EMAC ethernet controller. +config DWMAC_SUN55I + tristate "Allwinner sun55i GMAC200 support" + default ARCH_SUNXI + depends on OF && (ARCH_SUNXI || COMPILE_TEST) + select MDIO_BUS_MUX + help + Support for Allwinner A523/T527 GMAC200 ethernet controllers. + + This selects Allwinner SoC glue layer support for the + stmmac device driver. This driver is used for A523/T527 + GMAC200 ethernet controller. + config DWMAC_THEAD tristate "T-HEAD dwmac support" depends on OF && (ARCH_THEAD || COMPILE_TEST) diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile index b591d93f8503..51e068e26ce4 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Makefile +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o obj-$(CONFIG_DWMAC_STM32) += dwmac-stm32.o obj-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o obj-$(CONFIG_DWMAC_SUN8I) += dwmac-sun8i.o +obj-$(CONFIG_DWMAC_SUN55I) += dwmac-sun55i.o obj-$(CONFIG_DWMAC_THEAD) += dwmac-thead.o obj-$(CONFIG_DWMAC_DWC_QOS_ETH) += dwmac-dwc-qos-eth.o obj-$(CONFIG_DWMAC_INTEL_PLAT) += dwmac-intel-plat.o diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun55i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun55i.c new file mode 100644 index 000000000000..862df173d963 --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun55i.c @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * dwmac-sun55i.c - Allwinner sun55i GMAC200 specific glue layer + * + * Copyright (C) 2025 Chen-Yu Tsai <wens@csie.org> + * + * syscon parts taken from dwmac-sun8i.c, which is + * + * Copyright (C) 2017 Corentin Labbe <clabbe.montjoie@gmail.com> + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/stmmac.h> + +#include "stmmac.h" +#include "stmmac_platform.h" + +#define SYSCON_REG 0x34 + +/* RMII specific bits */ +#define SYSCON_RMII_EN BIT(13) /* 1: enable RMII (overrides EPIT) */ +/* Generic system control EMAC_CLK bits */ +#define SYSCON_ETXDC_MASK GENMASK(12, 10) +#define SYSCON_ERXDC_MASK GENMASK(9, 5) +/* EMAC PHY Interface Type */ +#define SYSCON_EPIT BIT(2) /* 1: RGMII, 0: MII */ +#define SYSCON_ETCS_MASK GENMASK(1, 0) +#define SYSCON_ETCS_MII 0x0 +#define SYSCON_ETCS_EXT_GMII 0x1 +#define SYSCON_ETCS_INT_GMII 0x2 + +static int sun55i_gmac200_set_syscon(struct device *dev, + struct plat_stmmacenet_data *plat) +{ + struct device_node *node = dev->of_node; + struct regmap *regmap; + u32 val, reg = 0; + int ret; + + regmap = syscon_regmap_lookup_by_phandle(node, "syscon"); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), "Unable to map syscon\n"); + + if (!of_property_read_u32(node, "tx-internal-delay-ps", &val)) { + if (val % 100) + return dev_err_probe(dev, -EINVAL, + "tx-delay must be a multiple of 100ps\n"); + val /= 100; + dev_dbg(dev, "set tx-delay to %x\n", val); + if (!FIELD_FIT(SYSCON_ETXDC_MASK, val)) + return dev_err_probe(dev, -EINVAL, + "TX clock delay exceeds maximum (%u00ps > %lu00ps)\n", + val, FIELD_MAX(SYSCON_ETXDC_MASK)); + + reg |= FIELD_PREP(SYSCON_ETXDC_MASK, val); + } + + if (!of_property_read_u32(node, "rx-internal-delay-ps", &val)) { + if (val % 100) + return dev_err_probe(dev, -EINVAL, + "rx-delay must be a multiple of 100ps\n"); + val /= 100; + dev_dbg(dev, "set rx-delay to %x\n", val); + if (!FIELD_FIT(SYSCON_ERXDC_MASK, val)) + return dev_err_probe(dev, -EINVAL, + "RX clock delay exceeds maximum (%u00ps > %lu00ps)\n", + val, FIELD_MAX(SYSCON_ERXDC_MASK)); + + reg |= FIELD_PREP(SYSCON_ERXDC_MASK, val); + } + + switch (plat->phy_interface) { + case PHY_INTERFACE_MODE_MII: + /* default */ + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + reg |= SYSCON_EPIT | SYSCON_ETCS_INT_GMII; + break; + case PHY_INTERFACE_MODE_RMII: + reg |= SYSCON_RMII_EN; + break; + default: + return dev_err_probe(dev, -EINVAL, "Unsupported interface mode: %s", + phy_modes(plat->phy_interface)); + } + + ret = regmap_write(regmap, SYSCON_REG, reg); + if (ret < 0) + return dev_err_probe(dev, ret, "Failed to write to syscon\n"); + + return 0; +} + +static int sun55i_gmac200_probe(struct platform_device *pdev) +{ + struct plat_stmmacenet_data *plat_dat; + struct stmmac_resources stmmac_res; + struct device *dev = &pdev->dev; + struct clk *clk; + int ret; + + ret = stmmac_get_platform_resources(pdev, &stmmac_res); + if (ret) + return ret; + + plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + + /* BSP disables it */ + plat_dat->flags |= STMMAC_FLAG_SPH_DISABLE; + plat_dat->host_dma_width = 32; + + ret = sun55i_gmac200_set_syscon(dev, plat_dat); + if (ret) + return ret; + + clk = devm_clk_get_enabled(dev, "mbus"); + if (IS_ERR(clk)) + return dev_err_probe(dev, PTR_ERR(clk), + "Failed to get or enable MBUS clock\n"); + + ret = devm_regulator_get_enable_optional(dev, "phy"); + if (ret) + return dev_err_probe(dev, ret, "Failed to get or enable PHY supply\n"); + + return devm_stmmac_pltfr_probe(pdev, plat_dat, &stmmac_res); +} + +static const struct of_device_id sun55i_gmac200_match[] = { + { .compatible = "allwinner,sun55i-a523-gmac200" }, + { } +}; +MODULE_DEVICE_TABLE(of, sun55i_gmac200_match); + +static struct platform_driver sun55i_gmac200_driver = { + .probe = sun55i_gmac200_probe, + .driver = { + .name = "dwmac-sun55i", + .pm = &stmmac_pltfr_pm_ops, + .of_match_table = sun55i_gmac200_match, + }, +}; +module_platform_driver(sun55i_gmac200_driver); + +MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>"); +MODULE_DESCRIPTION("Allwinner sun55i GMAC200 specific glue layer"); +MODULE_LICENSE("GPL"); |