diff options
Diffstat (limited to 'Documentation/ABI')
| -rw-r--r-- | Documentation/ABI/testing/configfs-acpi | 36 | ||||
| -rw-r--r-- | Documentation/ABI/testing/configfs-iio | 13 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio | 14 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio-health-afe440x | 63 |
4 files changed, 88 insertions, 38 deletions
diff --git a/Documentation/ABI/testing/configfs-acpi b/Documentation/ABI/testing/configfs-acpi new file mode 100644 index 000000000000..4ab4e99aa863 --- /dev/null +++ b/Documentation/ABI/testing/configfs-acpi @@ -0,0 +1,36 @@ +What: /config/acpi +Date: July 2016 +KernelVersion: 4.8 +Contact: linux-acpi@vger.kernel.org +Description: + This represents the ACPI subsystem entry point directory. It + contains sub-groups corresponding to ACPI configurable options. + +What: /config/acpi/table +Date: July 2016 +KernelVersion: 4.8 +Description: + + This group contains the configuration for user defined ACPI + tables. The attributes of a user define table are: + + aml - a binary attribute that the user can use to + fill in the ACPI aml definitions. Once the aml + data is written to this file and the file is + closed the table will be loaded and ACPI devices + will be enumerated. To check if the operation is + successful the user must check the error code + for close(). If the operation is successful, + subsequent writes to this attribute will fail. + + The rest of the attributes are read-only and are valid only + after the table has been loaded by filling the aml entry: + + signature - ASCII table signature + length - length of table in bytes, including the header + revision - ACPI Specification minor version number + oem_id - ASCII OEM identification + oem_table_id - ASCII OEM table identification + oem_revision - OEM revision number + asl_compiler_id - ASCII ASL compiler vendor ID + asl_compiler_revision - ASL compiler version diff --git a/Documentation/ABI/testing/configfs-iio b/Documentation/ABI/testing/configfs-iio index 2483756fccf5..aebda53ec0f7 100644 --- a/Documentation/ABI/testing/configfs-iio +++ b/Documentation/ABI/testing/configfs-iio @@ -19,3 +19,16 @@ KernelVersion: 4.4 Description: High resolution timers directory. Creating a directory here will result in creating a hrtimer trigger in the IIO subsystem. + +What: /config/iio/devices +Date: April 2016 +KernelVersion: 4.7 +Description: + Industrial IO software devices directory. + +What: /config/iio/devices/dummy +Date: April 2016 +KernelVersion: 4.7 +Description: + Dummy IIO devices directory. Creating a directory here will result + in creating a dummy IIO device in the IIO subystem. diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index df44998e7506..fee35c00cc4e 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -32,6 +32,13 @@ Description: Description of the physical chip / device for device X. Typically a part number. +What: /sys/bus/iio/devices/iio:deviceX/timestamp_clock +KernelVersion: 4.5 +Contact: linux-iio@vger.kernel.org +Description: + String identifying current posix clock used to timestamp + buffered samples and events for device X. + What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency What: /sys/bus/iio/devices/triggerX/sampling_frequency @@ -1565,3 +1572,10 @@ Description: * X is in the plane of the propellers, perpendicular to Y axis, and positive towards the starboard side of the UAV ; * Z is perpendicular to propellers plane and positive upwards. + +What: /sys/bus/iio/devices/iio:deviceX/in_electricalconductivity_raw +KernelVersion: 4.8 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled no offset etc.) electric conductivity reading that + can be processed to siemens per meter. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x index 3740f253d406..6adba9058b22 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x +++ b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x @@ -1,54 +1,41 @@ -What: /sys/bus/iio/devices/iio:deviceX/tia_resistanceY - /sys/bus/iio/devices/iio:deviceX/tia_capacitanceY -Date: December 2015 -KernelVersion: -Contact: Andrew F. Davis <afd@ti.com> -Description: - Get and set the resistance and the capacitance settings for the - Transimpedance Amplifier. Y is 1 for Rf1 and Cf1, Y is 2 for - Rf2 and Cf2 values. - -What: /sys/bus/iio/devices/iio:deviceX/tia_separate_en -Date: December 2015 -KernelVersion: -Contact: Andrew F. Davis <afd@ti.com> -Description: - Enable or disable separate settings for the TransImpedance - Amplifier above, when disabled both values are set by the - first channel. - -What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_raw - /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_ambient_raw -Date: December 2015 +What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_raw +Date: May 2016 KernelVersion: Contact: Andrew F. Davis <afd@ti.com> Description: Get measured values from the ADC for these stages. Y is the - specific LED number. The values are expressed in 24-bit twos - complement. + specific stage number corresponding to datasheet stage names + as follows: + 1 -> LED2 + 2 -> ALED2/LED3 + 3 -> LED1 + 4 -> ALED1/LED4 + Note that channels 5 and 6 represent LED2-ALED2 and LED1-ALED1 + respectively which simply helper channels containing the + calculated difference in the value of stage 1 - 2 and 3 - 4. + The values are expressed in 24-bit twos complement. -What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ledY-ledY_ambient_raw -Date: December 2015 +What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_offset +Date: May 2016 KernelVersion: Contact: Andrew F. Davis <afd@ti.com> Description: - Get differential values from the ADC for these stages. Y is the - specific LED number. The values are expressed in 24-bit twos - complement for the specified LEDs. + Get and set the offset cancellation DAC setting for these + stages. The values are expressed in 5-bit sign-magnitude. -What: /sys/bus/iio/devices/iio:deviceX/out_current_ledY_offset - /sys/bus/iio/devices/iio:deviceX/out_current_ledY_ambient_offset -Date: December 2015 +What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_resistance +What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_capacitance +Date: May 2016 KernelVersion: Contact: Andrew F. Davis <afd@ti.com> Description: - Get and set the offset cancellation DAC setting for these - stages. The values are expressed in 5-bit sign-magnitude. + Get and set the resistance and the capacitance settings for the + Transimpedance Amplifier during the associated stage. -What: /sys/bus/iio/devices/iio:deviceX/out_current_ledY_raw -Date: December 2015 +What: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw +Date: May 2016 KernelVersion: Contact: Andrew F. Davis <afd@ti.com> Description: - Get and set the LED current for the specified LED. Y is the - specific LED number. + Get and set the LED current for the specified LED active during + this stage. Y is the specific stage number. |