diff options
Diffstat (limited to 'Documentation/aoe/aoe.txt')
| -rw-r--r-- | Documentation/aoe/aoe.txt | 40 |
1 files changed, 36 insertions, 4 deletions
diff --git a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.txt index 43e50108d0e2..3a4dbe4663c9 100644 --- a/Documentation/aoe/aoe.txt +++ b/Documentation/aoe/aoe.txt @@ -4,6 +4,16 @@ The EtherDrive (R) HOWTO for users of 2.6 kernels is found at ... It has many tips and hints! +The aoetools are userland programs that are designed to work with this +driver. The aoetools are on sourceforge. + + http://aoetools.sourceforge.net/ + +The scripts in this Documentation/aoe directory are intended to +document the use of the driver and are not necessary if you install +the aoetools. + + CREATING DEVICE NODES Users of udev should find the block device nodes created @@ -35,14 +45,15 @@ USING DEVICE NODES "echo eth2 eth4 > /dev/etherd/interfaces" tells the aoe driver to limit ATA over Ethernet traffic to eth2 and eth4. AoE traffic from - untrusted networks should be ignored as a matter of security. + untrusted networks should be ignored as a matter of security. See + also the aoe_iflist driver option described below. "echo > /dev/etherd/discover" tells the driver to find out what AoE devices are available. These character devices may disappear and be replaced by sysfs - counterparts, so distribution maintainers are encouraged to create - scripts that use these devices. + counterparts. Using the commands in aoetools insulates users from + these implementation details. The block devices are named like this: @@ -66,7 +77,8 @@ USING SYSFS through which we are communicating with the remote AoE device. There is a script in this directory that formats this information - in a convenient way. + in a convenient way. Users with aoetools can use the aoe-stat + command. root@makki root# sh Documentation/aoe/status.sh e10.0 eth3 up @@ -89,3 +101,23 @@ USING SYSFS e4.7 eth1 up e4.8 eth1 up e4.9 eth1 up + + Use /sys/module/aoe/parameters/aoe_iflist (or better, the driver + option discussed below) instead of /dev/etherd/interfaces to limit + AoE traffic to the network interfaces in the given + whitespace-separated list. Unlike the old character device, the + sysfs entry can be read from as well as written to. + + It's helpful to trigger discovery after setting the list of allowed + interfaces. The aoetools package provides an aoe-discover script + for this purpose. You can also directly use the + /dev/etherd/discover special file described above. + +DRIVER OPTIONS + + There is a boot option for the built-in aoe driver and a + corresponding module parameter, aoe_iflist. Without this option, + all network interfaces may be used for ATA over Ethernet. Here is a + usage example for the module parameter. + + modprobe aoe_iflist="eth1 eth3" |