diff options
Diffstat (limited to 'Documentation/arm/Interrupts')
| -rw-r--r-- | Documentation/arm/Interrupts | 173 |
1 files changed, 173 insertions, 0 deletions
diff --git a/Documentation/arm/Interrupts b/Documentation/arm/Interrupts new file mode 100644 index 000000000000..72c93de8cd4e --- /dev/null +++ b/Documentation/arm/Interrupts @@ -0,0 +1,173 @@ +2.5.2-rmk5 +---------- + +This is the first kernel that contains a major shake up of some of the +major architecture-specific subsystems. + +Firstly, it contains some pretty major changes to the way we handle the +MMU TLB. Each MMU TLB variant is now handled completely separately - +we have TLB v3, TLB v4 (without write buffer), TLB v4 (with write buffer), +and finally TLB v4 (with write buffer, with I TLB invalidate entry). +There is more assembly code inside each of these functions, mainly to +allow more flexible TLB handling for the future. + +Secondly, the IRQ subsystem. + +The 2.5 kernels will be having major changes to the way IRQs are handled. +Unfortunately, this means that machine types that touch the irq_desc[] +array (basically all machine types) will break, and this means every +machine type that we currently have. + +Lets take an example. On the Assabet with Neponset, we have: + + GPIO25 IRR:2 + SA1100 ------------> Neponset -----------> SA1111 + IIR:1 + -----------> USAR + IIR:0 + -----------> SMC9196 + +The way stuff currently works, all SA1111 interrupts are mutually +exclusive of each other - if you're processing one interrupt from the +SA1111 and another comes in, you have to wait for that interrupt to +finish processing before you can service the new interrupt. Eg, an +IDE PIO-based interrupt on the SA1111 excludes all other SA1111 and +SMC9196 interrupts until it has finished transferring its multi-sector +data, which can be a long time. Note also that since we loop in the +SA1111 IRQ handler, SA1111 IRQs can hold off SMC9196 IRQs indefinitely. + + +The new approach brings several new ideas... + +We introduce the concept of a "parent" and a "child". For example, +to the Neponset handler, the "parent" is GPIO25, and the "children"d +are SA1111, SMC9196 and USAR. + +We also bring the idea of an IRQ "chip" (mainly to reduce the size of +the irqdesc array). This doesn't have to be a real "IC"; indeed the +SA11x0 IRQs are handled by two separate "chip" structures, one for +GPIO0-10, and another for all the rest. It is just a container for +the various operations (maybe this'll change to a better name). +This structure has the following operations: + +struct irqchip { + /* + * Acknowledge the IRQ. + * If this is a level-based IRQ, then it is expected to mask the IRQ + * as well. + */ + void (*ack)(unsigned int irq); + /* + * Mask the IRQ in hardware. + */ + void (*mask)(unsigned int irq); + /* + * Unmask the IRQ in hardware. + */ + void (*unmask)(unsigned int irq); + /* + * Re-run the IRQ + */ + void (*rerun)(unsigned int irq); + /* + * Set the type of the IRQ. + */ + int (*type)(unsigned int irq, unsigned int, type); +}; + +ack - required. May be the same function as mask for IRQs + handled by do_level_IRQ. +mask - required. +unmask - required. +rerun - optional. Not required if you're using do_level_IRQ for all + IRQs that use this 'irqchip'. Generally expected to re-trigger + the hardware IRQ if possible. If not, may call the handler + directly. +type - optional. If you don't support changing the type of an IRQ, + it should be null so people can detect if they are unable to + set the IRQ type. + +For each IRQ, we keep the following information: + + - "disable" depth (number of disable_irq()s without enable_irq()s) + - flags indicating what we can do with this IRQ (valid, probe, + noautounmask) as before + - status of the IRQ (probing, enable, etc) + - chip + - per-IRQ handler + - irqaction structure list + +The handler can be one of the 3 standard handlers - "level", "edge" and +"simple", or your own specific handler if you need to do something special. + +The "level" handler is what we currently have - its pretty simple. +"edge" knows about the brokenness of such IRQ implementations - that you +need to leave the hardware IRQ enabled while processing it, and queueing +further IRQ events should the IRQ happen again while processing. The +"simple" handler is very basic, and does not perform any hardware +manipulation, nor state tracking. This is useful for things like the +SMC9196 and USAR above. + +So, what's changed? + +1. Machine implementations must not write to the irqdesc array. + +2. New functions to manipulate the irqdesc array. The first 4 are expected + to be useful only to machine specific code. The last is recommended to + only be used by machine specific code, but may be used in drivers if + absolutely necessary. + + set_irq_chip(irq,chip) + + Set the mask/unmask methods for handling this IRQ + + set_irq_handler(irq,handler) + + Set the handler for this IRQ (level, edge, simple) + + set_irq_chained_handler(irq,handler) + + Set a "chained" handler for this IRQ - automatically + enables this IRQ (eg, Neponset and SA1111 handlers). + + set_irq_flags(irq,flags) + + Set the valid/probe/noautoenable flags. + + set_irq_type(irq,type) + + Set active the IRQ edge(s)/level. This replaces the + SA1111 INTPOL manipulation, and the set_GPIO_IRQ_edge() + function. Type should be one of the following: + + #define IRQT_NOEDGE (0) + #define IRQT_RISING (__IRQT_RISEDGE) + #define IRQT_FALLING (__IRQT_FALEDGE) + #define IRQT_BOTHEDGE (__IRQT_RISEDGE|__IRQT_FALEDGE) + #define IRQT_LOW (__IRQT_LOWLVL) + #define IRQT_HIGH (__IRQT_HIGHLVL) + +3. set_GPIO_IRQ_edge() is obsolete, and should be replaced by set_irq_type. + +4. Direct access to SA1111 INTPOL is depreciated. Use set_irq_type instead. + +5. A handler is expected to perform any necessary acknowledgement of the + parent IRQ via the correct chip specific function. For instance, if + the SA1111 is directly connected to a SA1110 GPIO, then you should + acknowledge the SA1110 IRQ each time you re-read the SA1111 IRQ status. + +6. For any child which doesn't have its own IRQ enable/disable controls + (eg, SMC9196), the handler must mask or acknowledge the parent IRQ + while the child handler is called, and the child handler should be the + "simple" handler (not "edge" nor "level"). After the handler completes, + the parent IRQ should be unmasked, and the status of all children must + be re-checked for pending events. (see the Neponset IRQ handler for + details). + +7. fixup_irq() is gone, as is include/asm-arm/arch-*/irq.h + +Please note that this will not solve all problems - some of them are +hardware based. Mixing level-based and edge-based IRQs on the same +parent signal (eg neponset) is one such area where a software based +solution can't provide the full answer to low IRQ latency. + |