diff options
Diffstat (limited to 'Documentation/arm/SA1100')
| -rw-r--r-- | Documentation/arm/SA1100/ADSBitsy | 43 | ||||
| -rw-r--r-- | Documentation/arm/SA1100/Assabet | 301 | ||||
| -rw-r--r-- | Documentation/arm/SA1100/Brutus | 66 | ||||
| -rw-r--r-- | Documentation/arm/SA1100/CERF | 29 | ||||
| -rw-r--r-- | Documentation/arm/SA1100/FreeBird | 21 | ||||
| -rw-r--r-- | Documentation/arm/SA1100/GraphicsClient | 98 | ||||
| -rw-r--r-- | Documentation/arm/SA1100/GraphicsMaster | 53 | ||||
| -rw-r--r-- | Documentation/arm/SA1100/HUW_WEBPANEL | 17 | ||||
| -rw-r--r-- | Documentation/arm/SA1100/Itsy | 39 | ||||
| -rw-r--r-- | Documentation/arm/SA1100/LART | 14 | ||||
| -rw-r--r-- | Documentation/arm/SA1100/PLEB | 11 | ||||
| -rw-r--r-- | Documentation/arm/SA1100/Pangolin | 23 | ||||
| -rw-r--r-- | Documentation/arm/SA1100/Tifon | 7 | ||||
| -rw-r--r-- | Documentation/arm/SA1100/Victor | 16 | ||||
| -rw-r--r-- | Documentation/arm/SA1100/Yopy | 2 | ||||
| -rw-r--r-- | Documentation/arm/SA1100/empeg | 2 | ||||
| -rw-r--r-- | Documentation/arm/SA1100/nanoEngine | 11 | ||||
| -rw-r--r-- | Documentation/arm/SA1100/serial_UART | 47 |
18 files changed, 800 insertions, 0 deletions
diff --git a/Documentation/arm/SA1100/ADSBitsy b/Documentation/arm/SA1100/ADSBitsy new file mode 100644 index 000000000000..ab47c3833908 --- /dev/null +++ b/Documentation/arm/SA1100/ADSBitsy @@ -0,0 +1,43 @@ +ADS Bitsy Single Board Computer +(It is different from Bitsy(iPAQ) of Compaq) + +For more details, contact Applied Data Systems or see +http://www.applieddata.net/products.html + +The Linux support for this product has been provided by +Woojung Huh <whuh@applieddata.net> + +Use 'make adsbitsy_config' before any 'make config'. +This will set up defaults for ADS Bitsy support. + +The kernel zImage is linked to be loaded and executed at 0xc0400000. + +Linux can be used with the ADS BootLoader that ships with the +newer rev boards. See their documentation on how to load Linux. + +Supported peripherals: +- SA1100 LCD frame buffer (8/16bpp...sort of) +- SA1111 USB Master +- SA1100 serial port +- pcmcia, compact flash +- touchscreen(ucb1200) +- console on LCD screen +- serial ports (ttyS[0-2]) + - ttyS0 is default for serial console + +To do: +- everything else! :-) + +Notes: + +- The flash on board is divided into 3 partitions. + You should be careful to use flash on board. + It's partition is different from GraphicsClient Plus and GraphicsMaster + +- 16bpp mode requires a different cable than what ships with the board. + Contact ADS or look through the manual to wire your own. Currently, + if you compile with 16bit mode support and switch into a lower bpp + mode, the timing is off so the image is corrupted. This will be + fixed soon. + +Any contribution can be sent to nico@cam.org and will be greatly welcome! diff --git a/Documentation/arm/SA1100/Assabet b/Documentation/arm/SA1100/Assabet new file mode 100644 index 000000000000..cbbe5587c78d --- /dev/null +++ b/Documentation/arm/SA1100/Assabet @@ -0,0 +1,301 @@ +The Intel Assabet (SA-1110 evaluation) board +============================================ + +Please see: +http://developer.intel.com/design/strong/quicklist/eval-plat/sa-1110.htm +http://developer.intel.com/design/strong/guides/278278.htm + +Also some notes from John G Dorsey <jd5q@andrew.cmu.edu>: +http://www.cs.cmu.edu/~wearable/software/assabet.html + + +Building the kernel +------------------- + +To build the kernel with current defaults: + + make assabet_config + make oldconfig + make zImage + +The resulting kernel image should be available in linux/arch/arm/boot/zImage. + + +Installing a bootloader +----------------------- + +A couple of bootloaders able to boot Linux on Assabet are available: + +BLOB (http://www.lart.tudelft.nl/lartware/blob/) + + BLOB is a bootloader used within the LART project. Some contributed + patches were merged into BLOB to add support for Assabet. + +Compaq's Bootldr + John Dorsey's patch for Assabet support +(http://www.handhelds.org/Compaq/bootldr.html) +(http://www.wearablegroup.org/software/bootldr/) + + Bootldr is the bootloader developed by Compaq for the iPAQ Pocket PC. + John Dorsey has produced add-on patches to add support for Assabet and + the JFFS filesystem. + +RedBoot (http://sources.redhat.com/redboot/) + + RedBoot is a bootloader developed by Red Hat based on the eCos RTOS + hardware abstraction layer. It supports Assabet amongst many other + hardware platforms. + +RedBoot is currently the recommended choice since it's the only one to have +networking support, and is the most actively maintained. + +Brief examples on how to boot Linux with RedBoot are shown below. But first +you need to have RedBoot installed in your flash memory. A known to work +precompiled RedBoot binary is available from the following location: + +ftp://ftp.netwinder.org/users/n/nico/ +ftp://ftp.arm.linux.org.uk/pub/linux/arm/people/nico/ +ftp://ftp.handhelds.org/pub/linux/arm/sa-1100-patches/ + +Look for redboot-assabet*.tgz. Some installation infos are provided in +redboot-assabet*.txt. + + +Initial RedBoot configuration +----------------------------- + +The commands used here are explained in The RedBoot User's Guide available +on-line at http://sources.redhat.com/ecos/docs-latest/redboot/redboot.html. +Please refer to it for explanations. + +If you have a CF network card (my Assabet kit contained a CF+ LP-E from +Socket Communications Inc.), you should strongly consider using it for TFTP +file transfers. You must insert it before RedBoot runs since it can't detect +it dynamically. + +To initialize the flash directory: + + fis init -f + +To initialize the non-volatile settings, like whether you want to use BOOTP or +a static IP address, etc, use this command: + + fconfig -i + + +Writing a kernel image into flash +--------------------------------- + +First, the kernel image must be loaded into RAM. If you have the zImage file +available on a TFTP server: + + load zImage -r -b 0x100000 + +If you rather want to use Y-Modem upload over the serial port: + + load -m ymodem -r -b 0x100000 + +To write it to flash: + + fis create "Linux kernel" -b 0x100000 -l 0xc0000 + + +Booting the kernel +------------------ + +The kernel still requires a filesystem to boot. A ramdisk image can be loaded +as follows: + + load ramdisk_image.gz -r -b 0x800000 + +Again, Y-Modem upload can be used instead of TFTP by replacing the file name +by '-y ymodem'. + +Now the kernel can be retrieved from flash like this: + + fis load "Linux kernel" + +or loaded as described previously. To boot the kernel: + + exec -b 0x100000 -l 0xc0000 + +The ramdisk image could be stored into flash as well, but there are better +solutions for on-flash filesystems as mentioned below. + + +Using JFFS2 +----------- + +Using JFFS2 (the Second Journalling Flash File System) is probably the most +convenient way to store a writable filesystem into flash. JFFS2 is used in +conjunction with the MTD layer which is responsible for low-level flash +management. More information on the Linux MTD can be found on-line at: +http://www.linux-mtd.infradead.org/. A JFFS howto with some infos about +creating JFFS/JFFS2 images is available from the same site. + +For instance, a sample JFFS2 image can be retrieved from the same FTP sites +mentioned below for the precompiled RedBoot image. + +To load this file: + + load sample_img.jffs2 -r -b 0x100000 + +The result should look like: + +RedBoot> load sample_img.jffs2 -r -b 0x100000 +Raw file loaded 0x00100000-0x00377424 + +Now we must know the size of the unallocated flash: + + fis free + +Result: + +RedBoot> fis free + 0x500E0000 .. 0x503C0000 + +The values above may be different depending on the size of the filesystem and +the type of flash. See their usage below as an example and take care of +substituting yours appropriately. + +We must determine some values: + +size of unallocated flash: 0x503c0000 - 0x500e0000 = 0x2e0000 +size of the filesystem image: 0x00377424 - 0x00100000 = 0x277424 + +We want to fit the filesystem image of course, but we also want to give it all +the remaining flash space as well. To write it: + + fis unlock -f 0x500E0000 -l 0x2e0000 + fis erase -f 0x500E0000 -l 0x2e0000 + fis write -b 0x100000 -l 0x277424 -f 0x500E0000 + fis create "JFFS2" -n -f 0x500E0000 -l 0x2e0000 + +Now the filesystem is associated to a MTD "partition" once Linux has discovered +what they are in the boot process. From Redboot, the 'fis list' command +displays them: + +RedBoot> fis list +Name FLASH addr Mem addr Length Entry point +RedBoot 0x50000000 0x50000000 0x00020000 0x00000000 +RedBoot config 0x503C0000 0x503C0000 0x00020000 0x00000000 +FIS directory 0x503E0000 0x503E0000 0x00020000 0x00000000 +Linux kernel 0x50020000 0x00100000 0x000C0000 0x00000000 +JFFS2 0x500E0000 0x500E0000 0x002E0000 0x00000000 + +However Linux should display something like: + +SA1100 flash: probing 32-bit flash bus +SA1100 flash: Found 2 x16 devices at 0x0 in 32-bit mode +Using RedBoot partition definition +Creating 5 MTD partitions on "SA1100 flash": +0x00000000-0x00020000 : "RedBoot" +0x00020000-0x000e0000 : "Linux kernel" +0x000e0000-0x003c0000 : "JFFS2" +0x003c0000-0x003e0000 : "RedBoot config" +0x003e0000-0x00400000 : "FIS directory" + +What's important here is the position of the partition we are interested in, +which is the third one. Within Linux, this correspond to /dev/mtdblock2. +Therefore to boot Linux with the kernel and its root filesystem in flash, we +need this RedBoot command: + + fis load "Linux kernel" + exec -b 0x100000 -l 0xc0000 -c "root=/dev/mtdblock2" + +Of course other filesystems than JFFS might be used, like cramfs for example. +You might want to boot with a root filesystem over NFS, etc. It is also +possible, and sometimes more convenient, to flash a filesystem directly from +within Linux while booted from a ramdisk or NFS. The Linux MTD repository has +many tools to deal with flash memory as well, to erase it for example. JFFS2 +can then be mounted directly on a freshly erased partition and files can be +copied over directly. Etc... + + +RedBoot scripting +----------------- + +All the commands above aren't so useful if they have to be typed in every +time the Assabet is rebooted. Therefore it's possible to automatize the boot +process using RedBoot's scripting capability. + +For example, I use this to boot Linux with both the kernel and the ramdisk +images retrieved from a TFTP server on the network: + +RedBoot> fconfig +Run script at boot: false true +Boot script: +Enter script, terminate with empty line +>> load zImage -r -b 0x100000 +>> load ramdisk_ks.gz -r -b 0x800000 +>> exec -b 0x100000 -l 0xc0000 +>> +Boot script timeout (1000ms resolution): 3 +Use BOOTP for network configuration: true +GDB connection port: 9000 +Network debug at boot time: false +Update RedBoot non-volatile configuration - are you sure (y/n)? y + +Then, rebooting the Assabet is just a matter of waiting for the login prompt. + + + +Nicolas Pitre +nico@cam.org +June 12, 2001 + + +Status of peripherals in -rmk tree (updated 14/10/2001) +------------------------------------------------------- + +Assabet: + Serial ports: + Radio: TX, RX, CTS, DSR, DCD, RI + PM: Not tested. + COM: TX, RX, CTS, DSR, DCD, RTS, DTR, PM + PM: Not tested. + I2C: Implemented, not fully tested. + L3: Fully tested, pass. + PM: Not tested. + + Video: + LCD: Fully tested. PM + (LCD doesn't like being blanked with + neponset connected) + Video out: Not fully + + Audio: + UDA1341: + Playback: Fully tested, pass. + Record: Implemented, not tested. + PM: Not tested. + + UCB1200: + Audio play: Implemented, not heavily tested. + Audio rec: Implemented, not heavily tested. + Telco audio play: Implemented, not heavily tested. + Telco audio rec: Implemented, not heavily tested. + POTS control: No + Touchscreen: Yes + PM: Not tested. + + Other: + PCMCIA: + LPE: Fully tested, pass. + USB: No + IRDA: + SIR: Fully tested, pass. + FIR: Fully tested, pass. + PM: Not tested. + +Neponset: + Serial ports: + COM1,2: TX, RX, CTS, DSR, DCD, RTS, DTR + PM: Not tested. + USB: Implemented, not heavily tested. + PCMCIA: Implemented, not heavily tested. + PM: Not tested. + CF: Implemented, not heavily tested. + PM: Not tested. + +More stuff can be found in the -np (Nicolas Pitre's) tree. + diff --git a/Documentation/arm/SA1100/Brutus b/Documentation/arm/SA1100/Brutus new file mode 100644 index 000000000000..2254c8f0b326 --- /dev/null +++ b/Documentation/arm/SA1100/Brutus @@ -0,0 +1,66 @@ +Brutus is an evaluation platform for the SA1100 manufactured by Intel. +For more details, see: + +http://developer.intel.com/design/strong/applnots/sa1100lx/getstart.htm + +To compile for Brutus, you must issue the following commands: + + make brutus_config + make config + [accept all the defaults] + make zImage + +The resulting kernel will end up in linux/arch/arm/boot/zImage. This file +must be loaded at 0xc0008000 in Brutus's memory and execution started at +0xc0008000 as well with the value of registers r0 = 0 and r1 = 16 upon +entry. + +But prior to execute the kernel, a ramdisk image must also be loaded in +memory. Use memory address 0xd8000000 for this. Note that the file +containing the (compressed) ramdisk image must not exceed 4 MB. + +Typically, you'll need angelboot to load the kernel. +The following angelboot.opt file should be used: + +----- begin angelboot.opt ----- +base 0xc0008000 +entry 0xc0008000 +r0 0x00000000 +r1 0x00000010 +device /dev/ttyS0 +options "9600 8N1" +baud 115200 +otherfile ramdisk_img.gz +otherbase 0xd8000000 +----- end angelboot.opt ----- + +Then load the kernel and ramdisk with: + + angelboot -f angelboot.opt zImage + +The first Brutus serial port (assumed to be linked to /dev/ttyS0 on your +host PC) is used by angel to load the kernel and ramdisk image. The serial +console is provided through the second Brutus serial port. To access it, +you may use minicom configured with /dev/ttyS1, 9600 baud, 8N1, no flow +control. + +Currently supported: + - RS232 serial ports + - audio output + - LCD screen + - keyboard + +The actual Brutus support may not be complete without extra patches. +If such patches exist, they should be found from +ftp.netwinder.org/users/n/nico. + +A full PCMCIA support is still missing, although it's possible to hack +some drivers in order to drive already inserted cards at boot time with +little modifications. + +Any contribution is welcome. + +Please send patches to nico@cam.org + +Have Fun ! + diff --git a/Documentation/arm/SA1100/CERF b/Documentation/arm/SA1100/CERF new file mode 100644 index 000000000000..b3d845301ef1 --- /dev/null +++ b/Documentation/arm/SA1100/CERF @@ -0,0 +1,29 @@ +*** The StrongARM version of the CerfBoard/Cube has been discontinued *** + +The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board +that measures approximately 2" square. It includes an Ethernet +controller, an RS232-compatible serial port, a USB function port, and +one CompactFlash+ slot on the back. Pictures can be found at the +Intrinsyc website, http://www.intrinsyc.com. + +This document describes the support in the Linux kernel for the +Intrinsyc CerfBoard. + +Supported in this version: + - CompactFlash+ slot (select PCMCIA in General Setup and any options + that may be required) + - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in + Network Devices) + - Serial ports with a serial console (hardcoded to 38400 8N1) + +In order to get this kernel onto your Cerf, you need a server that runs +both BOOTP and TFTP. Detailed instructions should have come with your +evaluation kit on how to use the bootloader. This series of commands +will suffice: + + make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig + make ARCH=arm CROSS_COMPILE=arm-linux- zImage + make ARCH=arm CROSS_COMPILE=arm-linux- modules + cp arch/arm/boot/zImage <TFTP directory> + +support@intrinsyc.com diff --git a/Documentation/arm/SA1100/FreeBird b/Documentation/arm/SA1100/FreeBird new file mode 100644 index 000000000000..eda28b3232e7 --- /dev/null +++ b/Documentation/arm/SA1100/FreeBird @@ -0,0 +1,21 @@ +Freebird-1.1 is produced by Legned(C) ,Inc. +(http://www.legend.com.cn) +and software/linux mainatined by Coventive(C),Inc. +(http://www.coventive.com) + +Based on the Nicolas's strongarm kernel tree. + +=============================================================== +Maintainer: + +Chester Kuo <chester@coventive.com> + <chester@linux.org.tw> + +Author : +Tim wu <timwu@coventive.com> +CIH <cih@coventive.com> +Eric Peng <ericpeng@coventive.com> +Jeff Lee <jeff_lee@coventive.com> +Allen Cheng +Tony Liu <tonyliu@coventive.com> + diff --git a/Documentation/arm/SA1100/GraphicsClient b/Documentation/arm/SA1100/GraphicsClient new file mode 100644 index 000000000000..8fa7e8027ff1 --- /dev/null +++ b/Documentation/arm/SA1100/GraphicsClient @@ -0,0 +1,98 @@ +ADS GraphicsClient Plus Single Board Computer + +For more details, contact Applied Data Systems or see +http://www.applieddata.net/products.html + +The original Linux support for this product has been provided by +Nicolas Pitre <nico@cam.org>. Continued development work by +Woojung Huh <whuh@applieddata.net> + +It's currently possible to mount a root filesystem via NFS providing a +complete Linux environment. Otherwise a ramdisk image may be used. The +board supports MTD/JFFS, so you could also mount something on there. + +Use 'make graphicsclient_config' before any 'make config'. This will set up +defaults for GraphicsClient Plus support. + +The kernel zImage is linked to be loaded and executed at 0xc0200000. +Also the following registers should have the specified values upon entry: + + r0 = 0 + r1 = 29 (this is the GraphicsClient architecture number) + +Linux can be used with the ADS BootLoader that ships with the +newer rev boards. See their documentation on how to load Linux. +Angel is not available for the GraphicsClient Plus AFAIK. + +There is a board known as just the GraphicsClient that ADS used to +produce but has end of lifed. This code will not work on the older +board with the ADS bootloader, but should still work with Angel, +as outlined below. In any case, if you're planning on deploying +something en masse, you should probably get the newer board. + +If using Angel on the older boards, here is a typical angel.opt option file +if the kernel is loaded through the Angel Debug Monitor: + +----- begin angelboot.opt ----- +base 0xc0200000 +entry 0xc0200000 +r0 0x00000000 +r1 0x0000001d +device /dev/ttyS1 +options "38400 8N1" +baud 115200 +#otherfile ramdisk.gz +#otherbase 0xc0800000 +exec minicom +----- end angelboot.opt ----- + +Then the kernel (and ramdisk if otherfile/otherbase lines above are +uncommented) would be loaded with: + + angelboot -f angelboot.opt zImage + +Here it is assumed that the board is connected to ttyS1 on your PC +and that minicom is preconfigured with /dev/ttyS1, 38400 baud, 8N1, no flow +control by default. + +If any other bootloader is used, ensure it accomplish the same, especially +for r0/r1 register values before jumping into the kernel. + + +Supported peripherals: +- SA1100 LCD frame buffer (8/16bpp...sort of) +- on-board SMC 92C96 ethernet NIC +- SA1100 serial port +- flash memory access (MTD/JFFS) +- pcmcia +- touchscreen(ucb1200) +- ps/2 keyboard +- console on LCD screen +- serial ports (ttyS[0-2]) + - ttyS0 is default for serial console +- Smart I/O (ADC, keypad, digital inputs, etc) + See http://www.applieddata.com/developers/linux for IOCTL documentation + and example user space code. ps/2 keybd is multiplexed through this driver + +To do: +- UCB1200 audio with new ucb_generic layer +- everything else! :-) + +Notes: + +- The flash on board is divided into 3 partitions. mtd0 is where + the ADS boot ROM and zImage is stored. It's been marked as + read-only to keep you from blasting over the bootloader. :) mtd1 is + for the ramdisk.gz image. mtd2 is user flash space and can be + utilized for either JFFS or if you're feeling crazy, running ext2 + on top of it. If you're not using the ADS bootloader, you're + welcome to blast over the mtd1 partition also. + +- 16bpp mode requires a different cable than what ships with the board. + Contact ADS or look through the manual to wire your own. Currently, + if you compile with 16bit mode support and switch into a lower bpp + mode, the timing is off so the image is corrupted. This will be + fixed soon. + +Any contribution can be sent to nico@cam.org and will be greatly welcome! + diff --git a/Documentation/arm/SA1100/GraphicsMaster b/Documentation/arm/SA1100/GraphicsMaster new file mode 100644 index 000000000000..dd28745ac521 --- /dev/null +++ b/Documentation/arm/SA1100/GraphicsMaster @@ -0,0 +1,53 @@ +ADS GraphicsMaster Single Board Computer + +For more details, contact Applied Data Systems or see +http://www.applieddata.net/products.html + +The original Linux support for this product has been provided by +Nicolas Pitre <nico@cam.org>. Continued development work by +Woojung Huh <whuh@applieddata.net> + +Use 'make graphicsmaster_config' before any 'make config'. +This will set up defaults for GraphicsMaster support. + +The kernel zImage is linked to be loaded and executed at 0xc0400000. + +Linux can be used with the ADS BootLoader that ships with the +newer rev boards. See their documentation on how to load Linux. + +Supported peripherals: +- SA1100 LCD frame buffer (8/16bpp...sort of) +- SA1111 USB Master +- on-board SMC 92C96 ethernet NIC +- SA1100 serial port +- flash memory access (MTD/JFFS) +- pcmcia, compact flash +- touchscreen(ucb1200) +- ps/2 keyboard +- console on LCD screen +- serial ports (ttyS[0-2]) + - ttyS0 is default for serial console +- Smart I/O (ADC, keypad, digital inputs, etc) + See http://www.applieddata.com/developers/linux for IOCTL documentation + and example user space code. ps/2 keybd is multiplexed through this driver + +To do: +- everything else! :-) + +Notes: + +- The flash on board is divided into 3 partitions. mtd0 is where + the zImage is stored. It's been marked as read-only to keep you + from blasting over the bootloader. :) mtd1 is + for the ramdisk.gz image. mtd2 is user flash space and can be + utilized for either JFFS or if you're feeling crazy, running ext2 + on top of it. If you're not using the ADS bootloader, you're + welcome to blast over the mtd1 partition also. + +- 16bpp mode requires a different cable than what ships with the board. + Contact ADS or look through the manual to wire your own. Currently, + if you compile with 16bit mode support and switch into a lower bpp + mode, the timing is off so the image is corrupted. This will be + fixed soon. + +Any contribution can be sent to nico@cam.org and will be greatly welcome! diff --git a/Documentation/arm/SA1100/HUW_WEBPANEL b/Documentation/arm/SA1100/HUW_WEBPANEL new file mode 100644 index 000000000000..fd56b48d4833 --- /dev/null +++ b/Documentation/arm/SA1100/HUW_WEBPANEL @@ -0,0 +1,17 @@ +The HUW_WEBPANEL is a product of the german company Hoeft & Wessel AG + +If you want more information, please visit +http://www.hoeft-wessel.de + +To build the kernel: + make huw_webpanel_config + make oldconfig + [accept all defaults] + make zImage + +Mostly of the work is done by: +Roman Jordan jor@hoeft-wessel.de +Christoph Schulz schu@hoeft-wessel.de + +2000/12/18/ + diff --git a/Documentation/arm/SA1100/Itsy b/Documentation/arm/SA1100/Itsy new file mode 100644 index 000000000000..3b594534323b --- /dev/null +++ b/Documentation/arm/SA1100/Itsy @@ -0,0 +1,39 @@ +Itsy is a research project done by the Western Research Lab, and Systems +Research Center in Palo Alto, CA. The Itsy project is one of several +research projects at Compaq that are related to pocket computing. + +For more information, see: + + http://www.research.digital.com/wrl/itsy/index.html + +Notes on initial 2.4 Itsy support (8/27/2000) : +The port was done on an Itsy version 1.5 machine with a daughtercard with +64 Meg of DRAM and 32 Meg of Flash. The initial work includes support for +serial console (to see what you're doing). No other devices have been +enabled. + +To build, do a "make menuconfig" (or xmenuconfig) and select Itsy support. +Disable Flash and LCD support. and then do a make zImage. +Finally, you will need to cd to arch/arm/boot/tools and execute a make there +to build the params-itsy program used to boot the kernel. + +In order to install the port of 2.4 to the itsy, You will need to set the +configuration parameters in the monitor as follows: +Arg 1:0x08340000, Arg2: 0xC0000000, Arg3:18 (0x12), Arg4:0 +Make sure the start-routine address is set to 0x00060000. + +Next, flash the params-itsy program to 0x00060000 ("p 1 0x00060000" in the +flash menu) Flash the kernel in arch/arm/boot/zImage into 0x08340000 +("p 1 0x00340000"). Finally flash an initial ramdisk into 0xC8000000 +("p 2 0x0") We used ramdisk-2-30.gz from the 0.11 version directory on +handhelds.org. + +The serial connection we established was at: + 8-bit data, no parity, 1 stop bit(s), 115200.00 b/s. in the monitor, in the +params-itsy program, and in the kernel itself. This can be changed, but +not easily. The monitor parameters are easily changed, the params program +setup is assembly outl's, and the kernel is a configuration item specific to +the itsy. (i.e. grep for CONFIG_SA1100_ITSY and you'll find where it is.) + + +This should get you a properly booting 2.4 kernel on the itsy. diff --git a/Documentation/arm/SA1100/LART b/Documentation/arm/SA1100/LART new file mode 100644 index 000000000000..2f73f513e16a --- /dev/null +++ b/Documentation/arm/SA1100/LART @@ -0,0 +1,14 @@ +Linux Advanced Radio Terminal (LART) +------------------------------------ + +The LART is a small (7.5 x 10cm) SA-1100 board, designed for embedded +applications. It has 32 MB DRAM, 4MB Flash ROM, double RS232 and all +other StrongARM-gadgets. Almost all SA signals are directly accessible +through a number of connectors. The powersupply accepts voltages +between 3.5V and 16V and is overdimensioned to support a range of +daughterboards. A quad Ethernet / IDE / PS2 / sound daughterboard +is under development, with plenty of others in different stages of +planning. + +The hardware designs for this board have been released under an open license; +see the LART page at http://www.lart.tudelft.nl/ for more information. diff --git a/Documentation/arm/SA1100/PLEB b/Documentation/arm/SA1100/PLEB new file mode 100644 index 000000000000..92cae066908d --- /dev/null +++ b/Documentation/arm/SA1100/PLEB @@ -0,0 +1,11 @@ +The PLEB project was started as a student initiative at the School of +Computer Science and Engineering, University of New South Wales to make a +pocket computer capable of running the Linux Kernel. + +PLEB support has yet to be fully integrated. + +For more information, see: + + http://www.cse.unsw.edu.au/~pleb/ + + diff --git a/Documentation/arm/SA1100/Pangolin b/Documentation/arm/SA1100/Pangolin new file mode 100644 index 000000000000..077a6120e129 --- /dev/null +++ b/Documentation/arm/SA1100/Pangolin @@ -0,0 +1,23 @@ +Pangolin is a StrongARM 1110-based evaluation platform produced +by Dialogue Technology (http://www.dialogue.com.tw/). +It has EISA slots for ease of configuration with SDRAM/Flash +memory card, USB/Serial/Audio card, Compact Flash card, +PCMCIA/IDE card and TFT-LCD card. + +To compile for Pangolin, you must issue the following commands: + + make pangolin_config + make oldconfig + make zImage + +Supported peripherals: +- SA1110 serial port (UART1/UART2/UART3) +- flash memory access +- compact flash driver +- UDA1341 sound driver +- SA1100 LCD controller for 800x600 16bpp TFT-LCD +- MQ-200 driver for 800x600 16bpp TFT-LCD +- Penmount(touch panel) driver +- PCMCIA driver +- SMC91C94 LAN driver +- IDE driver (experimental) diff --git a/Documentation/arm/SA1100/Tifon b/Documentation/arm/SA1100/Tifon new file mode 100644 index 000000000000..dd1934d9c851 --- /dev/null +++ b/Documentation/arm/SA1100/Tifon @@ -0,0 +1,7 @@ +Tifon +----- + +More info has to come... + +Contact: Peter Danielsson <peter.danielsson@era-t.ericsson.se> + diff --git a/Documentation/arm/SA1100/Victor b/Documentation/arm/SA1100/Victor new file mode 100644 index 000000000000..01e81fc49461 --- /dev/null +++ b/Documentation/arm/SA1100/Victor @@ -0,0 +1,16 @@ +Victor is known as a "digital talking book player" manufactured by +VisuAide, Inc. to be used by blind people. + +For more information related to Victor, see: + + http://www.visuaide.com/victor + +Of course Victor is using Linux as its main operating system. +The Victor implementation for Linux is maintained by Nicolas Pitre: + + nico@visuaide.com + nico@cam.org + +For any comments, please feel free to contact me through the above +addresses. + diff --git a/Documentation/arm/SA1100/Yopy b/Documentation/arm/SA1100/Yopy new file mode 100644 index 000000000000..e14f16d836ac --- /dev/null +++ b/Documentation/arm/SA1100/Yopy @@ -0,0 +1,2 @@ +See http://www.yopydeveloper.org for more. + diff --git a/Documentation/arm/SA1100/empeg b/Documentation/arm/SA1100/empeg new file mode 100644 index 000000000000..4ece4849a42c --- /dev/null +++ b/Documentation/arm/SA1100/empeg @@ -0,0 +1,2 @@ +See ../empeg/README + diff --git a/Documentation/arm/SA1100/nanoEngine b/Documentation/arm/SA1100/nanoEngine new file mode 100644 index 000000000000..fc431cbfefc2 --- /dev/null +++ b/Documentation/arm/SA1100/nanoEngine @@ -0,0 +1,11 @@ +nanoEngine +---------- + +"nanoEngine" is a SA1110 based single board computer from +Bright Star Engineering Inc. See www.brightstareng.com/arm +for more info. +(Ref: Stuart Adams <sja@brightstareng.com>) + +Also visit Larry Doolittle's "Linux for the nanoEngine" site: +http://recycle.lbl.gov/~ldoolitt/bse/ + diff --git a/Documentation/arm/SA1100/serial_UART b/Documentation/arm/SA1100/serial_UART new file mode 100644 index 000000000000..aea2e91ca0ef --- /dev/null +++ b/Documentation/arm/SA1100/serial_UART @@ -0,0 +1,47 @@ +The SA1100 serial port had its major/minor numbers officially assigned: + +> Date: Sun, 24 Sep 2000 21:40:27 -0700 +> From: H. Peter Anvin <hpa@transmeta.com> +> To: Nicolas Pitre <nico@CAM.ORG> +> Cc: Device List Maintainer <device@lanana.org> +> Subject: Re: device +> +> Okay. Note that device numbers 204 and 205 are used for "low density +> serial devices", so you will have a range of minors on those majors (the +> tty device layer handles this just fine, so you don't have to worry about +> doing anything special.) +> +> So your assignments are: +> +> 204 char Low-density serial ports +> 5 = /dev/ttySA0 SA1100 builtin serial port 0 +> 6 = /dev/ttySA1 SA1100 builtin serial port 1 +> 7 = /dev/ttySA2 SA1100 builtin serial port 2 +> +> 205 char Low-density serial ports (alternate device) +> 5 = /dev/cusa0 Callout device for ttySA0 +> 6 = /dev/cusa1 Callout device for ttySA1 +> 7 = /dev/cusa2 Callout device for ttySA2 +> + +If you're not using devfs, you must create those inodes in /dev +on the root filesystem used by your SA1100-based device: + + mknod ttySA0 c 204 5 + mknod ttySA1 c 204 6 + mknod ttySA2 c 204 7 + mknod cusa0 c 205 5 + mknod cusa1 c 205 6 + mknod cusa2 c 205 7 + +In addition to the creation of the appropriate device nodes above, you +must ensure your user space applications make use of the correct device +name. The classic example is the content of the /etc/inittab file where +you might have a getty process started on ttyS0. In this case: + +- replace occurrences of ttyS0 with ttySA0, ttyS1 with ttySA1, etc. + +- don't forget to add 'ttySA0', 'console', or the appropriate tty name + in /etc/securetty for root to be allowed to login as well. + + |