diff options
Diffstat (limited to 'Documentation/block')
| -rw-r--r-- | Documentation/block/biodoc.txt | 7 | ||||
| -rw-r--r-- | Documentation/block/biovecs.txt | 111 |
2 files changed, 114 insertions, 4 deletions
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 8df5e8e6dceb..2101e718670d 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -447,14 +447,13 @@ struct bio_vec { * main unit of I/O for the block layer and lower layers (ie drivers) */ struct bio { - sector_t bi_sector; struct bio *bi_next; /* request queue link */ struct block_device *bi_bdev; /* target device */ unsigned long bi_flags; /* status, command, etc */ unsigned long bi_rw; /* low bits: r/w, high: priority */ unsigned int bi_vcnt; /* how may bio_vec's */ - unsigned int bi_idx; /* current index into bio_vec array */ + struct bvec_iter bi_iter; /* current index into bio_vec array */ unsigned int bi_size; /* total size in bytes */ unsigned short bi_phys_segments; /* segments after physaddr coalesce*/ @@ -480,7 +479,7 @@ With this multipage bio design: - Code that traverses the req list can find all the segments of a bio by using rq_for_each_segment. This handles the fact that a request has multiple bios, each of which can have multiple segments. -- Drivers which can't process a large bio in one shot can use the bi_idx +- Drivers which can't process a large bio in one shot can use the bi_iter field to keep track of the next bio_vec entry to process. (e.g a 1MB bio_vec needs to be handled in max 128kB chunks for IDE) [TBD: Should preferably also have a bi_voffset and bi_vlen to avoid modifying @@ -589,7 +588,7 @@ driver should not modify these values. The block layer sets up the nr_sectors and current_nr_sectors fields (based on the corresponding hard_xxx values and the number of bytes transferred) and updates it on every transfer that invokes end_that_request_first. It does the same for the -buffer, bio, bio->bi_idx fields too. +buffer, bio, bio->bi_iter fields too. The buffer field is just a virtual address mapping of the current segment of the i/o buffer in cases where the buffer resides in low-memory. For high diff --git a/Documentation/block/biovecs.txt b/Documentation/block/biovecs.txt new file mode 100644 index 000000000000..74a32ad52f53 --- /dev/null +++ b/Documentation/block/biovecs.txt @@ -0,0 +1,111 @@ + +Immutable biovecs and biovec iterators: +======================================= + +Kent Overstreet <kmo@daterainc.com> + +As of 3.13, biovecs should never be modified after a bio has been submitted. +Instead, we have a new struct bvec_iter which represents a range of a biovec - +the iterator will be modified as the bio is completed, not the biovec. + +More specifically, old code that needed to partially complete a bio would +update bi_sector and bi_size, and advance bi_idx to the next biovec. If it +ended up partway through a biovec, it would increment bv_offset and decrement +bv_len by the number of bytes completed in that biovec. + +In the new scheme of things, everything that must be mutated in order to +partially complete a bio is segregated into struct bvec_iter: bi_sector, +bi_size and bi_idx have been moved there; and instead of modifying bv_offset +and bv_len, struct bvec_iter has bi_bvec_done, which represents the number of +bytes completed in the current bvec. + +There are a bunch of new helper macros for hiding the gory details - in +particular, presenting the illusion of partially completed biovecs so that +normal code doesn't have to deal with bi_bvec_done. + + * Driver code should no longer refer to biovecs directly; we now have + bio_iovec() and bio_iovec_iter() macros that return literal struct biovecs, + constructed from the raw biovecs but taking into account bi_bvec_done and + bi_size. + + bio_for_each_segment() has been updated to take a bvec_iter argument + instead of an integer (that corresponded to bi_idx); for a lot of code the + conversion just required changing the types of the arguments to + bio_for_each_segment(). + + * Advancing a bvec_iter is done with bio_advance_iter(); bio_advance() is a + wrapper around bio_advance_iter() that operates on bio->bi_iter, and also + advances the bio integrity's iter if present. + + There is a lower level advance function - bvec_iter_advance() - which takes + a pointer to a biovec, not a bio; this is used by the bio integrity code. + +What's all this get us? +======================= + +Having a real iterator, and making biovecs immutable, has a number of +advantages: + + * Before, iterating over bios was very awkward when you weren't processing + exactly one bvec at a time - for example, bio_copy_data() in fs/bio.c, + which copies the contents of one bio into another. Because the biovecs + wouldn't necessarily be the same size, the old code was tricky convoluted - + it had to walk two different bios at the same time, keeping both bi_idx and + and offset into the current biovec for each. + + The new code is much more straightforward - have a look. This sort of + pattern comes up in a lot of places; a lot of drivers were essentially open + coding bvec iterators before, and having common implementation considerably + simplifies a lot of code. + + * Before, any code that might need to use the biovec after the bio had been + completed (perhaps to copy the data somewhere else, or perhaps to resubmit + it somewhere else if there was an error) had to save the entire bvec array + - again, this was being done in a fair number of places. + + * Biovecs can be shared between multiple bios - a bvec iter can represent an + arbitrary range of an existing biovec, both starting and ending midway + through biovecs. This is what enables efficient splitting of arbitrary + bios. Note that this means we _only_ use bi_size to determine when we've + reached the end of a bio, not bi_vcnt - and the bio_iovec() macro takes + bi_size into account when constructing biovecs. + + * Splitting bios is now much simpler. The old bio_split() didn't even work on + bios with more than a single bvec! Now, we can efficiently split arbitrary + size bios - because the new bio can share the old bio's biovec. + + Care must be taken to ensure the biovec isn't freed while the split bio is + still using it, in case the original bio completes first, though. Using + bio_chain() when splitting bios helps with this. + + * Submitting partially completed bios is now perfectly fine - this comes up + occasionally in stacking block drivers and various code (e.g. md and + bcache) had some ugly workarounds for this. + + It used to be the case that submitting a partially completed bio would work + fine to _most_ devices, but since accessing the raw bvec array was the + norm, not all drivers would respect bi_idx and those would break. Now, + since all drivers _must_ go through the bvec iterator - and have been + audited to make sure they are - submitting partially completed bios is + perfectly fine. + +Other implications: +=================== + + * Almost all usage of bi_idx is now incorrect and has been removed; instead, + where previously you would have used bi_idx you'd now use a bvec_iter, + probably passing it to one of the helper macros. + + I.e. instead of using bio_iovec_idx() (or bio->bi_iovec[bio->bi_idx]), you + now use bio_iter_iovec(), which takes a bvec_iter and returns a + literal struct bio_vec - constructed on the fly from the raw biovec but + taking into account bi_bvec_done (and bi_size). + + * bi_vcnt can't be trusted or relied upon by driver code - i.e. anything that + doesn't actually own the bio. The reason is twofold: firstly, it's not + actually needed for iterating over the bio anymore - we only use bi_size. + Secondly, when cloning a bio and reusing (a portion of) the original bio's + biovec, in order to calculate bi_vcnt for the new bio we'd have to iterate + over all the biovecs in the new bio - which is silly as it's not needed. + + So, don't use bi_vcnt anymore. |