summaryrefslogtreecommitdiff
path: root/Documentation/blockdev
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/blockdev')
-rw-r--r--Documentation/blockdev/nbd.txt38
1 files changed, 4 insertions, 34 deletions
diff --git a/Documentation/blockdev/nbd.txt b/Documentation/blockdev/nbd.txt
index aeb93ffe6416..271e607304da 100644
--- a/Documentation/blockdev/nbd.txt
+++ b/Documentation/blockdev/nbd.txt
@@ -4,43 +4,13 @@
can use a remote server as one of its block devices. So every time
the client computer wants to read, e.g., /dev/nb0, it sends a
request over TCP to the server, which will reply with the data read.
- This can be used for stations with low disk space (or even diskless -
- if you boot from floppy) to borrow disk space from another computer.
- Unlike NFS, it is possible to put any filesystem on it, etc. It should
- even be possible to use NBD as a root filesystem (I've never tried),
- but it requires a user-level program to be in the initrd to start.
- It also allows you to run block-device in user land (making server
- and client physically the same computer, communicating using loopback).
-
- Current state: It currently works. Network block device is stable.
- I originally thought that it was impossible to swap over TCP. It
- turned out not to be true - swapping over TCP now works and seems
- to be deadlock-free, but it requires heavy patches into Linux's
- network layer.
-
+ This can be used for stations with low disk space (or even diskless)
+ to borrow disk space from another computer.
+ Unlike NFS, it is possible to put any filesystem on it, etc.
+
For more information, or to download the nbd-client and nbd-server
tools, go to http://nbd.sf.net/.
- Howto: To setup nbd, you can simply do the following:
-
- First, serve a device or file from a remote server:
-
- nbd-server <port-number> <device-or-file-to-serve-to-client>
-
- e.g.,
- root@server1 # nbd-server 1234 /dev/sdb1
-
- (serves sdb1 partition on TCP port 1234)
-
- Then, on the local (client) system:
-
- nbd-client <server-name-or-IP> <server-port-number> /dev/nb[0-n]
-
- e.g.,
- root@client1 # nbd-client server1 1234 /dev/nb0
-
- (creates the nb0 device on client1)
-
The nbd kernel module need only be installed on the client
system, as the nbd-server is completely in userspace. In fact,
the nbd-server has been successfully ported to other operating