diff options
Diffstat (limited to 'Documentation/devicetree/bindings/clock')
38 files changed, 1574 insertions, 52 deletions
diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt new file mode 100644 index 000000000000..2b7b3fa588d7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt @@ -0,0 +1,40 @@ +* Amlogic Meson8b Clock and Reset Unit + +The Amlogic Meson8b clock controller generates and supplies clock to various +controllers within the SoC. + +Required Properties: + +- compatible: should be "amlogic,meson8b-clkc" +- reg: it must be composed by two tuples: + 0) physical base address of the xtal register and length of memory + mapped region. + 1) physical base address of the clock controller and length of memory + mapped region. + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be +used in device tree sources. + +Example: Clock controller node: + + clkc: clock-controller@c1104000 { + #clock-cells = <1>; + compatible = "amlogic,meson8b-clkc"; + reg = <0xc1108000 0x4>, <0xc1104000 0x460>; + }; + + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart_AO: serial@c81004c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81004c0 0x14>; + interrupts = <0 90 1>; + clocks = <&clkc CLKID_CLK81>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt index 7a4d4926f44e..5ba6450693b9 100644 --- a/Documentation/devicetree/bindings/clock/at91-clock.txt +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -248,7 +248,7 @@ Required properties for peripheral clocks: - #address-cells : shall be 1 (reg is used to encode clk id). - clocks : shall be the master clock phandle. e.g. clocks = <&mck>; -- name: device tree node describing a specific system clock. +- name: device tree node describing a specific peripheral clock. * #clock-cells : from common clock binding; shall be set to 0. * reg: peripheral id. See Atmel's datasheets to get a full list of peripheral ids. diff --git a/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt b/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt deleted file mode 100644 index 00d26edec8bc..000000000000 --- a/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt +++ /dev/null @@ -1,34 +0,0 @@ -Broadcom Cygnus Clocks - -This binding uses the common clock binding: -Documentation/devicetree/bindings/clock/clock-bindings.txt - -Currently various "fixed" clocks are declared for peripheral drivers that use -the common clock framework to reference their core clocks. Proper support of -these clocks will be added later - -Device tree example: - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <1>; - clock-frequency = <25000000>; - }; - - apb_clk: apb_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000000>; - }; - - periph_clk: periph_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <500000000>; - }; - }; diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt new file mode 100644 index 000000000000..da8d9bb5751c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt @@ -0,0 +1,132 @@ +Broadcom iProc Family Clocks + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +The iProc clock controller manages clocks that are common to the iProc family. +An SoC from the iProc family may have several PPLs, e.g., ARMPLL, GENPLL, +LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL +comprises of several leaf clocks + +Required properties for a PLL and its leaf clocks: + +- compatible: + Should have a value of the form "brcm,<soc>-<pll>". For example, GENPLL on +Cygnus has a compatible string of "brcm,cygnus-genpll" + +- #clock-cells: + Have a value of <1> since there are more than 1 leaf clock of a given PLL + +- reg: + Define the base and range of the I/O address space that contain the iProc +clock control registers required for the PLL + +- clocks: + The input parent clock phandle for the PLL. For most iProc PLLs, this is an +onboard crystal with a fixed rate + +- clock-output-names: + An ordered list of strings defining the names of the clocks + +Example: + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + genpll: genpll { + #clock-cells = <1>; + compatible = "brcm,cygnus-genpll"; + reg = <0x0301d000 0x2c>, <0x0301c020 0x4>; + clocks = <&osc>; + clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys", + "enet_sw", "audio_125", "can"; + }; + +Required properties for ASIU clocks: + +ASIU clocks are a special case. These clocks are derived directly from the +reference clock of the onboard crystal + +- compatible: + Should have a value of the form "brcm,<soc>-asiu-clk". For example, ASIU +clocks for Cygnus have a compatible string of "brcm,cygnus-asiu-clk" + +- #clock-cells: + Have a value of <1> since there are more than 1 ASIU clocks + +- reg: + Define the base and range of the I/O address space that contain the iProc +clock control registers required for ASIU clocks + +- clocks: + The input parent clock phandle for the ASIU clock, i.e., the onboard +crystal + +- clock-output-names: + An ordered list of strings defining the names of the ASIU clocks + +Example: + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + asiu_clks: asiu_clks { + #clock-cells = <1>; + compatible = "brcm,cygnus-asiu-clk"; + reg = <0x0301d048 0xc>, <0x180aa024 0x4>; + clocks = <&osc>; + clock-output-names = "keypad", "adc/touch", "pwm"; + }; + +Cygnus +------ +PLL and leaf clock compatible strings for Cygnus are: + "brcm,cygnus-armpll" + "brcm,cygnus-genpll" + "brcm,cygnus-lcpll0" + "brcm,cygnus-mipipll" + "brcm,cygnus-asiu-clk" + +The following table defines the set of PLL/clock index and ID for Cygnus. +These clock IDs are defined in: + "include/dt-bindings/clock/bcm-cygnus.h" + + Clock Source (Parent) Index ID + --- ----- ----- --------- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK + adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK + pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK + + genpll crystal 0 BCM_CYGNUS_GENPLL + axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK + 250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK + ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK + enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK + audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK + can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK + + lcpll0 crystal 0 BCM_CYGNUS_LCPLL0 + pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK + ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK + sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK + usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK + smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK + ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED + + mipipll crystal 0 BCM_CYGNUS_MIPIPLL + ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED + ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD + ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D + ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED + ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED + ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED diff --git a/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt index 5286e260fcae..5286e260fcae 100644 --- a/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt +++ b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt index 06fc6d541c89..2ec489eebe72 100644 --- a/Documentation/devicetree/bindings/clock/clock-bindings.txt +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -138,9 +138,10 @@ Some platforms may require initial configuration of default parent clocks and clock frequencies. Such a configuration can be specified in a device tree node through assigned-clocks, assigned-clock-parents and assigned-clock-rates properties. The assigned-clock-parents property should contain a list of parent -clocks in form of phandle and clock specifier pairs, the assigned-clock-parents -property the list of assigned clock frequency values - corresponding to clocks -listed in the assigned-clocks property. +clocks in the form of a phandle and clock specifier pair and the +assigned-clock-rates property should contain a list of frequencies in Hz. Both +these properties should correspond to the clocks listed in the assigned-clocks +property. To skip setting parent or rate of a clock its corresponding entry should be set to 0, or can be omitted if it is not followed by any non-zero entry. diff --git a/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt b/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt new file mode 100644 index 000000000000..54d6d1358339 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt @@ -0,0 +1,55 @@ +* Clock and reset bindings for CSR atlas7 + +Required properties: +- compatible: Should be "sirf,atlas7-car" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- #reset-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. +The ID list atlas7_clks defined in drivers/clk/sirf/clk-atlas7.c + +The reset consumer should specify the desired reset by having the reset +ID in its "reset" phandle cell. +The ID list atlas7_reset_unit defined in drivers/clk/sirf/clk-atlas7.c + +Examples: Clock and reset controller node: + +car: clock-controller@18620000 { + compatible = "sirf,atlas7-car"; + reg = <0x18620000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; +}; + +Examples: Consumers using clock or reset: + +timer@10dc0000 { + compatible = "sirf,macro-tick"; + reg = <0x10dc0000 0x1000>; + clocks = <&car 54>; + interrupts = <0 0 0>, + <0 1 0>, + <0 2 0>, + <0 49 0>, + <0 50 0>, + <0 51 0>; +}; + +uart1: uart@18020000 { + cell-index = <1>; + compatible = "sirf,macro-uart"; + reg = <0x18020000 0x1000>; + clocks = <&clks 95>; + interrupts = <0 18 0>; + fifosize = <32>; +}; + +vpp@13110000 { + compatible = "sirf,prima2-vpp"; + reg = <0x13110000 0x10000>; + interrupts = <0 31 0>; + clocks = <&car 85>; + resets = <&car 29>; +}; diff --git a/Documentation/devicetree/bindings/clock/emev2-clock.txt b/Documentation/devicetree/bindings/clock/emev2-clock.txt index 60bbb1a8c69a..268ca615459e 100644 --- a/Documentation/devicetree/bindings/clock/emev2-clock.txt +++ b/Documentation/devicetree/bindings/clock/emev2-clock.txt @@ -52,7 +52,7 @@ usia_u0_sclk: usia_u0_sclk { Example of consumer: -uart@e1020000 { +serial@e1020000 { compatible = "renesas,em-uart"; reg = <0xe1020000 0x38>; interrupts = <0 8 0>; diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt index f57d9dd9ea85..f1738b88c225 100644 --- a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt @@ -9,6 +9,8 @@ Required Properties: - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC. - "samsung,exynos3250-cmu-dmc" - controller compatible with Exynos3250 SoC for Dynamic Memory Controller domain. + - "samsung,exynos3250-cmu-isp" - ISP block clock controller compatible + with Exynos3250 SOC - reg: physical base address of the controller and length of memory mapped region. @@ -36,6 +38,12 @@ Example 1: Examples of clock controller nodes are listed below. #clock-cells = <1>; }; + cmu_isp: clock-controller@10048000 { + compatible = "samsung,exynos3250-cmu-isp"; + reg = <0x10048000 0x1000>; + #clock-cells = <1>; + }; + Example 2: UART controller node that consumes the clock generated by the clock controller. Refer to the standard clock bindings for information about 'clocks' and 'clock-names' property. diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt new file mode 100644 index 000000000000..63379b04e052 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -0,0 +1,462 @@ +* Samsung Exynos5433 CMU (Clock Management Units) + +The Exynos5433 clock controller generates and supplies clock to various +controllers within the Exynos5433 SoC. + +Required Properties: + +- compatible: should be one of the following. + - "samsung,exynos5433-cmu-top" - clock controller compatible for CMU_TOP + which generates clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS + domains and bus clocks. + - "samsung,exynos5433-cmu-cpif" - clock controller compatible for CMU_CPIF + which generates clocks for LLI (Low Latency Interface) IP. + - "samsung,exynos5433-cmu-mif" - clock controller compatible for CMU_MIF + which generates clocks for DRAM Memory Controller domain. + - "samsung,exynos5433-cmu-peric" - clock controller compatible for CMU_PERIC + which generates clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs. + - "samsung,exynos5433-cmu-peris" - clock controller compatible for CMU_PERIS + which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs. + - "samsung,exynos5433-cmu-fsys" - clock controller compatible for CMU_FSYS + which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs. + - "samsung,exynos5433-cmu-g2d" - clock controller compatible for CMU_G2D + which generates clocks for G2D/MDMA IPs. + - "samsung,exynos5433-cmu-disp" - clock controller compatible for CMU_DISP + which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs. + - "samsung,exynos5433-cmu-aud" - clock controller compatible for CMU_AUD + which generates clocks for Cortex-A5/BUS/AUDIO clocks. + - "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1" + and "samsung,exynos5433-cmu-bus2" - clock controller compatible for CMU_BUS + which generates global data buses clock and global peripheral buses clock. + - "samsung,exynos5433-cmu-g3d" - clock controller compatible for CMU_G3D + which generates clocks for 3D Graphics Engine IP. + - "samsung,exynos5433-cmu-gscl" - clock controller compatible for CMU_GSCL + which generates clocks for GSCALER IPs. + - "samsung,exynos5433-cmu-apollo"- clock controller compatible for CMU_APOLLO + which generates clocks for Cortex-A53 Quad-core processor. + - "samsung,exynos5433-cmu-atlas" - clock controller compatible for CMU_ATLAS + which generates clocks for Cortex-A57 Quad-core processor, CoreSight and + L2 cache controller. + - "samsung,exynos5433-cmu-mscl" - clock controller compatible for CMU_MSCL + which generates clocks for M2M (Memory to Memory) scaler and JPEG IPs. + - "samsung,exynos5433-cmu-mfc" - clock controller compatible for CMU_MFC + which generates clocks for MFC(Multi-Format Codec) IP. + - "samsung,exynos5433-cmu-hevc" - clock controller compatible for CMU_HEVC + which generates clocks for HEVC(High Efficiency Video Codec) decoder IP. + - "samsung,exynos5433-cmu-isp" - clock controller compatible for CMU_ISP + which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs. + - "samsung,exynos5433-cmu-cam0" - clock controller compatible for CMU_CAM0 + which generates clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} + IPs. + - "samsung,exynos5433-cmu-cam1" - clock controller compatible for CMU_CAM1 + which generates clocks for Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +- clocks: list of the clock controller input clock identifiers, + from common clock bindings. Please refer the next section + to find the input clocks for a given controller. + +- clock-names: list of the clock controller input clock names, + as described in clock-bindings.txt. + + Input clocks for top clock controller: + - oscclk + - sclk_mphy_pll + - sclk_mfc_pll + - sclk_bus_pll + + Input clocks for cpif clock controller: + - oscclk + + Input clocks for mif clock controller: + - oscclk + - sclk_mphy_pll + + Input clocks for fsys clock controller: + - oscclk + - sclk_ufs_mphy + - div_aclk_fsys_200 + - sclk_pcie_100_fsys + - sclk_ufsunipro_fsys + - sclk_mmc2_fsys + - sclk_mmc1_fsys + - sclk_mmc0_fsys + - sclk_usbhost30_fsys + - sclk_usbdrd30_fsys + + Input clocks for g2d clock controller: + - oscclk + - aclk_g2d_266 + - aclk_g2d_400 + + Input clocks for disp clock controller: + - oscclk + - sclk_dsim1_disp + - sclk_dsim0_disp + - sclk_dsd_disp + - sclk_decon_tv_eclk_disp + - sclk_decon_vclk_disp + - sclk_decon_eclk_disp + - sclk_decon_tv_vclk_disp + - aclk_disp_333 + + Input clocks for bus0 clock controller: + - aclk_bus0_400 + + Input clocks for bus1 clock controller: + - aclk_bus1_400 + + Input clocks for bus2 clock controller: + - oscclk + - aclk_bus2_400 + + Input clocks for g3d clock controller: + - oscclk + - aclk_g3d_400 + + Input clocks for gscl clock controller: + - oscclk + - aclk_gscl_111 + - aclk_gscl_333 + + Input clocks for apollo clock controller: + - oscclk + - sclk_bus_pll_apollo + + Input clocks for atlas clock controller: + - oscclk + - sclk_bus_pll_atlas + + Input clocks for mscl clock controller: + - oscclk + - sclk_jpeg_mscl + - aclk_mscl_400 + + Input clocks for mfc clock controller: + - oscclk + - aclk_mfc_400 + + Input clocks for hevc clock controller: + - oscclk + - aclk_hevc_400 + + Input clocks for isp clock controller: + - oscclk + - aclk_isp_dis_400 + - aclk_isp_400 + + Input clocks for cam0 clock controller: + - oscclk + - aclk_cam0_333 + - aclk_cam0_400 + - aclk_cam0_552 + + Input clocks for cam1 clock controller: + - oscclk + - sclk_isp_uart_cam1 + - sclk_isp_spi1_cam1 + - sclk_isp_spi0_cam1 + - aclk_cam1_333 + - aclk_cam1_400 + - aclk_cam1_552 + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/exynos5433.h header and can be used in device +tree sources. + +Example 1: Examples of 'oscclk' source clock node are listed below. + + xxti: xxti { + compatible = "fixed-clock"; + clock-output-names = "oscclk"; + #clock-cells = <0>; + }; + +Example 2: Examples of clock controller nodes are listed below. + + cmu_top: clock-controller@10030000 { + compatible = "samsung,exynos5433-cmu-top"; + reg = <0x10030000 0x0c04>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_mphy_pll", + "sclk_mfc_pll", + "sclk_bus_pll"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_MPHY_PLL>, + <&cmu_mif CLK_SCLK_MFC_PLL>, + <&cmu_mif CLK_SCLK_BUS_PLL>; + }; + + cmu_cpif: clock-controller@10fc0000 { + compatible = "samsung,exynos5433-cmu-cpif"; + reg = <0x10fc0000 0x0c04>; + #clock-cells = <1>; + + clock-names = "oscclk"; + clocks = <&xxti>; + }; + + cmu_mif: clock-controller@105b0000 { + compatible = "samsung,exynos5433-cmu-mif"; + reg = <0x105b0000 0x100c>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_mphy_pll"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_MPHY_PLL>; + }; + + cmu_peric: clock-controller@14c80000 { + compatible = "samsung,exynos5433-cmu-peric"; + reg = <0x14c80000 0x0b08>; + #clock-cells = <1>; + }; + + cmu_peris: clock-controller@10040000 { + compatible = "samsung,exynos5433-cmu-peris"; + reg = <0x10040000 0x0b20>; + #clock-cells = <1>; + }; + + cmu_fsys: clock-controller@156e0000 { + compatible = "samsung,exynos5433-cmu-fsys"; + reg = <0x156e0000 0x0b04>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_ufs_mphy", + "div_aclk_fsys_200", + "sclk_pcie_100_fsys", + "sclk_ufsunipro_fsys", + "sclk_mmc2_fsys", + "sclk_mmc1_fsys", + "sclk_mmc0_fsys", + "sclk_usbhost30_fsys", + "sclk_usbdrd30_fsys"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_UFS_MPHY>, + <&cmu_top CLK_DIV_ACLK_FSYS_200>, + <&cmu_top CLK_SCLK_PCIE_100_FSYS>, + <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>, + <&cmu_top CLK_SCLK_MMC2_FSYS>, + <&cmu_top CLK_SCLK_MMC1_FSYS>, + <&cmu_top CLK_SCLK_MMC0_FSYS>, + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, + <&cmu_top CLK_SCLK_USBDRD30_FSYS>; + }; + + cmu_g2d: clock-controller@12460000 { + compatible = "samsung,exynos5433-cmu-g2d"; + reg = <0x12460000 0x0b08>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_g2d_266", + "aclk_g2d_400"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_G2D_266>, + <&cmu_top CLK_ACLK_G2D_400>; + }; + + cmu_disp: clock-controller@13b90000 { + compatible = "samsung,exynos5433-cmu-disp"; + reg = <0x13b90000 0x0c04>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_dsim1_disp", + "sclk_dsim0_disp", + "sclk_dsd_disp", + "sclk_decon_tv_eclk_disp", + "sclk_decon_vclk_disp", + "sclk_decon_eclk_disp", + "sclk_decon_tv_vclk_disp", + "aclk_disp_333"; + clocks = <&xxti>, + <&cmu_mif CLK_SCLK_DSIM1_DISP>, + <&cmu_mif CLK_SCLK_DSIM0_DISP>, + <&cmu_mif CLK_SCLK_DSD_DISP>, + <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, + <&cmu_mif CLK_ACLK_DISP_333>; + }; + + cmu_aud: clock-controller@114c0000 { + compatible = "samsung,exynos5433-cmu-aud"; + reg = <0x114c0000 0x0b04>; + #clock-cells = <1>; + }; + + cmu_bus0: clock-controller@13600000 { + compatible = "samsung,exynos5433-cmu-bus0"; + reg = <0x13600000 0x0b04>; + #clock-cells = <1>; + + clock-names = "aclk_bus0_400"; + clocks = <&cmu_top CLK_ACLK_BUS0_400>; + }; + + cmu_bus1: clock-controller@14800000 { + compatible = "samsung,exynos5433-cmu-bus1"; + reg = <0x14800000 0x0b04>; + #clock-cells = <1>; + + clock-names = "aclk_bus1_400"; + clocks = <&cmu_top CLK_ACLK_BUS1_400>; + }; + + cmu_bus2: clock-controller@13400000 { + compatible = "samsung,exynos5433-cmu-bus2"; + reg = <0x13400000 0x0b04>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_bus2_400"; + clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>; + }; + + cmu_g3d: clock-controller@14aa0000 { + compatible = "samsung,exynos5433-cmu-g3d"; + reg = <0x14aa0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_g3d_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; + }; + + cmu_gscl: clock-controller@13cf0000 { + compatible = "samsung,exynos5433-cmu-gscl"; + reg = <0x13cf0000 0x0b10>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_gscl_111", + "aclk_gscl_333"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_GSCL_111>, + <&cmu_top CLK_ACLK_GSCL_333>; + }; + + cmu_apollo: clock-controller@11900000 { + compatible = "samsung,exynos5433-cmu-apollo"; + reg = <0x11900000 0x1088>; + #clock-cells = <1>; + + clock-names = "oscclk", "sclk_bus_pll_apollo"; + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>; + }; + + cmu_atlas: clock-controller@11800000 { + compatible = "samsung,exynos5433-cmu-atlas"; + reg = <0x11800000 0x1088>; + #clock-cells = <1>; + + clock-names = "oscclk", "sclk_bus_pll_atlas"; + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; + }; + + cmu_mscl: clock-controller@105d0000 { + compatible = "samsung,exynos5433-cmu-mscl"; + reg = <0x105d0000 0x0b10>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_jpeg_mscl", + "aclk_mscl_400"; + clocks = <&xxti>, + <&cmu_top CLK_SCLK_JPEG_MSCL>, + <&cmu_top CLK_ACLK_MSCL_400>; + }; + + cmu_mfc: clock-controller@15280000 { + compatible = "samsung,exynos5433-cmu-mfc"; + reg = <0x15280000 0x0b08>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_mfc_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; + }; + + cmu_hevc: clock-controller@14f80000 { + compatible = "samsung,exynos5433-cmu-hevc"; + reg = <0x14f80000 0x0b08>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_hevc_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; + }; + + cmu_isp: clock-controller@146d0000 { + compatible = "samsung,exynos5433-cmu-isp"; + reg = <0x146d0000 0x0b0c>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_isp_dis_400", + "aclk_isp_400"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_ISP_DIS_400>, + <&cmu_top CLK_ACLK_ISP_400>; + }; + + cmu_cam0: clock-controller@120d0000 { + compatible = "samsung,exynos5433-cmu-cam0"; + reg = <0x120d0000 0x0b0c>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_cam0_333", + "aclk_cam0_400", + "aclk_cam0_552"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_CAM0_333>, + <&cmu_top CLK_ACLK_CAM0_400>, + <&cmu_top CLK_ACLK_CAM0_552>; + }; + + cmu_cam1: clock-controller@145d0000 { + compatible = "samsung,exynos5433-cmu-cam1"; + reg = <0x145d0000 0x0b08>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_isp_uart_cam1", + "sclk_isp_spi1_cam1", + "sclk_isp_spi0_cam1", + "aclk_cam1_333", + "aclk_cam1_400", + "aclk_cam1_552"; + clocks = <&xxti>, + <&cmu_top CLK_SCLK_ISP_UART_CAM1>, + <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>, + <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>, + <&cmu_top CLK_ACLK_CAM1_333>, + <&cmu_top CLK_ACLK_CAM1_400>, + <&cmu_top CLK_ACLK_CAM1_552>; + }; + +Example 3: UART controller node that consumes the clock generated by the clock + controller. + + serial_0: serial@14C10000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x14C10000 0x100>; + interrupts = <0 421 0>; + clocks = <&cmu_peric CLK_PCLK_UART0>, + <&cmu_peric CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_bus>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt b/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt new file mode 100644 index 000000000000..332396265689 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt @@ -0,0 +1,26 @@ +Fujitsu CRG11 clock driver bindings +----------------------------------- + +Required properties : +- compatible : Shall contain "fujitsu,mb86s70-crg11" +- #clock-cells : Shall be 3 {cntrlr domain port} + +The consumer specifies the desired clock pointing to its phandle. + +Example: + + clock: crg11 { + compatible = "fujitsu,mb86s70-crg11"; + #clock-cells = <3>; + }; + + mhu: mhu0@2b1f0000 { + #mbox-cells = <1>; + compatible = "arm,mhu"; + reg = <0 0x2B1F0000 0x1000>; + interrupts = <0 36 4>, /* LP Non-Sec */ + <0 35 4>, /* HP Non-Sec */ + <0 37 4>; /* Secure */ + clocks = <&clock 0 2 1>; /* Cntrlr:0 Domain:2 Port:1 */ + clock-names = "clk"; + }; diff --git a/Documentation/devicetree/bindings/clock/hi6220-clock.txt b/Documentation/devicetree/bindings/clock/hi6220-clock.txt new file mode 100644 index 000000000000..259e30af9597 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hi6220-clock.txt @@ -0,0 +1,34 @@ +* Hisilicon Hi6220 Clock Controller + +Clock control registers reside in different Hi6220 system controllers, +please refer the following document to know more about the binding rules +for these system controllers: + +Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt + +Required Properties: + +- compatible: the compatible should be one of the following strings to + indicate the clock controller functionality. + + - "hisilicon,hi6220-aoctrl" + - "hisilicon,hi6220-sysctrl" + - "hisilicon,hi6220-mediactrl" + - "hisilicon,hi6220-pmctrl" + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +For example: + sys_ctrl: sys_ctrl@f7030000 { + compatible = "hisilicon,hi6220-sysctrl", "syscon"; + reg = <0x0 0xf7030000 0x0 0x2000>; + #clock-cells = <1>; + }; + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hi6220-clock.h>. diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.txt b/Documentation/devicetree/bindings/clock/imx7d-clock.txt new file mode 100644 index 000000000000..9d3026d81a68 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx7d-clock.txt @@ -0,0 +1,13 @@ +* Clock bindings for Freescale i.MX7 Dual + +Required properties: +- compatible: Should be "fsl,imx7d-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include entries "ckil", "osc" + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h +for the full list of i.MX7 Dual clock IDs. diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt new file mode 100644 index 000000000000..f8d4134ae409 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt @@ -0,0 +1,53 @@ +Ingenic SoC CGU binding + +The CGU in an Ingenic SoC provides all the clocks generated on-chip. It +typically includes a variety of PLLs, multiplexers, dividers & gates in order +to provide many different clock signals derived from only 2 external source +clocks. + +Required properties: +- compatible : Should be "ingenic,<soctype>-cgu". + For example "ingenic,jz4740-cgu" or "ingenic,jz4780-cgu". +- reg : The address & length of the CGU registers. +- clocks : List of phandle & clock specifiers for clocks external to the CGU. + Two such external clocks should be specified - first the external crystal + "ext" and second the RTC clock source "rtc". +- clock-names : List of name strings for the external clocks. +- #clock-cells: Should be 1. + Clock consumers specify this argument to identify a clock. The valid values + may be found in <dt-bindings/clock/<soctype>-cgu.h>. + +Example SoC include file: + +/ { + cgu: jz4740-cgu { + compatible = "ingenic,jz4740-cgu"; + reg = <0x10000000 0x100>; + #clock-cells = <1>; + }; + + uart0: serial@10030000 { + clocks = <&cgu JZ4740_CLK_UART0>; + }; +}; + +Example board file: + +/ { + ext: clock@0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + rtc: clock@1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + &cgu { + clocks = <&ext> <&rtc>; + clock-names: "ext", "rtc"; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/keystone-pll.txt b/Documentation/devicetree/bindings/clock/keystone-pll.txt index 225990f79b7c..47570d207215 100644 --- a/Documentation/devicetree/bindings/clock/keystone-pll.txt +++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt @@ -15,8 +15,8 @@ Required properties: - compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock" - clocks : parent clock phandle - reg - pll control0 and pll multipler registers -- reg-names : control and multiplier. The multiplier is applicable only for - main pll clock +- reg-names : control, multiplier and post-divider. The multiplier and + post-divider registers are applicable only for main pll clock - fixed-postdiv : fixed post divider value. If absent, use clkod register bits for postdiv @@ -25,8 +25,8 @@ Example: #clock-cells = <0>; compatible = "ti,keystone,main-pll-clock"; clocks = <&refclksys>; - reg = <0x02620350 4>, <0x02310110 4>; - reg-names = "control", "multiplier"; + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>; + reg-names = "control", "multiplier", "post-divider"; fixed-postdiv = <2>; }; diff --git a/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt new file mode 100644 index 000000000000..fa97c12014ac --- /dev/null +++ b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt @@ -0,0 +1,77 @@ +* NXP LPC1850 Clock Control Unit (CCU) + +Each CGU base clock has several clock branches which can be turned on +or off independently by the Clock Control Units CCU1 or CCU2. The +branch clocks are distributed between CCU1 and CCU2. + + - Above text taken from NXP LPC1850 User Manual. + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible: + Should be "nxp,lpc1850-ccu" +- reg: + Shall define the base and range of the address space + containing clock control registers +- #clock-cells: + Shall have value <1>. The permitted clock-specifier values + are the branch clock names defined in table below. +- clocks: + Shall contain a list of phandles for the base clocks routed + from the CGU to the specific CCU. See mapping of base clocks + and CCU in table below. +- clock-names: + Shall contain a list of names for the base clock routed + from the CGU to the specific CCU. Valid CCU clock names: + "base_usb0_clk", "base_periph_clk", "base_usb1_clk", + "base_cpu_clk", "base_spifi_clk", "base_spi_clk", + "base_apb1_clk", "base_apb3_clk", "base_adchs_clk", + "base_sdio_clk", "base_ssp0_clk", "base_ssp1_clk", + "base_uart0_clk", "base_uart1_clk", "base_uart2_clk", + "base_uart3_clk", "base_audio_clk" + +Which branch clocks that are available on the CCU depends on the +specific LPC part. Check the user manual for your specific part. + +A list of CCU clocks can be found in dt-bindings/clock/lpc18xx-ccu.h. + +Example board file: + +soc { + ccu1: clock-controller@40051000 { + compatible = "nxp,lpc1850-ccu"; + reg = <0x40051000 0x1000>; + #clock-cells = <1>; + clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>, + <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>, + <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>, + <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>; + clock-names = "base_apb3_clk", "base_apb1_clk", + "base_spifi_clk", "base_cpu_clk", + "base_periph_clk", "base_usb0_clk", + "base_usb1_clk", "base_spi_clk"; + }; + + ccu2: clock-controller@40052000 { + compatible = "nxp,lpc1850-ccu"; + reg = <0x40052000 0x1000>; + #clock-cells = <1>; + clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>, + <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>, + <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>, + <&cgu BASE_SSP0_CLK>, <&cgu BASE_SDIO_CLK>; + clock-names = "base_audio_clk", "base_uart3_clk", + "base_uart2_clk", "base_uart1_clk", + "base_uart0_clk", "base_ssp1_clk", + "base_ssp0_clk", "base_sdio_clk"; + }; + + /* A user of CCU brach clocks */ + uart1: serial@40082000 { + ... + clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>; + ... + }; +}; diff --git a/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt b/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt new file mode 100644 index 000000000000..2cc32a9a945a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt @@ -0,0 +1,131 @@ +* NXP LPC1850 Clock Generation Unit (CGU) + +The CGU generates multiple independent clocks for the core and the +peripheral blocks of the LPC18xx. Each independent clock is called +a base clock and itself is one of the inputs to the two Clock +Control Units (CCUs) which control the branch clocks to the +individual peripherals. + +The CGU selects the inputs to the clock generators from multiple +clock sources, controls the clock generation, and routes the outputs +of the clock generators through the clock source bus to the output +stages. Each output stage provides an independent clock source and +corresponds to one of the base clocks for the LPC18xx. + + - Above text taken from NXP LPC1850 User Manual. + + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible: + Should be "nxp,lpc1850-cgu" +- reg: + Shall define the base and range of the address space + containing clock control registers +- #clock-cells: + Shall have value <1>. The permitted clock-specifier values + are the base clock numbers defined below. +- clocks: + Shall contain a list of phandles for the external input + sources to the CGU. The list shall be in the following + order: xtal, 32khz, enet_rx_clk, enet_tx_clk, gp_clkin. +- clock-indices: + Shall be an ordered list of numbers defining the base clock + number provided by the CGU. +- clock-output-names: + Shall be an ordered list of strings defining the names of + the clocks provided by the CGU. + +Which base clocks that are available on the CGU depends on the +specific LPC part. Base clocks are numbered from 0 to 27. + +Number: Name: Description: + 0 BASE_SAFE_CLK Base safe clock (always on) for WWDT + 1 BASE_USB0_CLK Base clock for USB0 + 2 BASE_PERIPH_CLK Base clock for Cortex-M0SUB subsystem, + SPI, and SGPIO + 3 BASE_USB1_CLK Base clock for USB1 + 4 BASE_CPU_CLK System base clock for ARM Cortex-M core + and APB peripheral blocks #0 and #2 + 5 BASE_SPIFI_CLK Base clock for SPIFI + 6 BASE_SPI_CLK Base clock for SPI + 7 BASE_PHY_RX_CLK Base clock for Ethernet PHY Receive clock + 8 BASE_PHY_TX_CLK Base clock for Ethernet PHY Transmit clock + 9 BASE_APB1_CLK Base clock for APB peripheral block # 1 +10 BASE_APB3_CLK Base clock for APB peripheral block # 3 +11 BASE_LCD_CLK Base clock for LCD +12 BASE_ADCHS_CLK Base clock for ADCHS +13 BASE_SDIO_CLK Base clock for SD/MMC +14 BASE_SSP0_CLK Base clock for SSP0 +15 BASE_SSP1_CLK Base clock for SSP1 +16 BASE_UART0_CLK Base clock for UART0 +17 BASE_UART1_CLK Base clock for UART1 +18 BASE_UART2_CLK Base clock for UART2 +19 BASE_UART3_CLK Base clock for UART3 +20 BASE_OUT_CLK Base clock for CLKOUT pin +24-21 - Reserved +25 BASE_AUDIO_CLK Base clock for audio system (I2S) +26 BASE_CGU_OUT0_CLK Base clock for CGU_OUT0 clock output +27 BASE_CGU_OUT1_CLK Base clock for CGU_OUT1 clock output + +BASE_PERIPH_CLK and BASE_SPI_CLK is only available on LPC43xx. +BASE_ADCHS_CLK is only available on LPC4370. + + +Example board file: + +/ { + clocks { + xtal: xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + xtal32: xtal32 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + enet_rx_clk: enet_rx_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "enet_rx_clk"; + }; + + enet_tx_clk: enet_tx_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "enet_tx_clk"; + }; + + gp_clkin: gp_clkin { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "gp_clkin"; + }; + }; + + soc { + cgu: clock-controller@40050000 { + compatible = "nxp,lpc1850-cgu"; + reg = <0x40050000 0x1000>; + #clock-cells = <1>; + clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>; + }; + + /* A CGU and CCU clock consumer */ + lcdc: lcdc@40008000 { + ... + clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>; + clock-names = "clcdclk", "apb_pclk"; + ... + }; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/marvell,berlin.txt b/Documentation/devicetree/bindings/clock/marvell,berlin.txt new file mode 100644 index 000000000000..c611c495f3ff --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,berlin.txt @@ -0,0 +1,31 @@ +Device Tree Clock bindings for Marvell Berlin + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Clock related registers are spread among the chip control registers. Berlin +clock node should be a sub-node of the chip controller node. Marvell Berlin2 +(BG2, BG2CD, BG2Q) SoCs share the same IP for PLLs and clocks, with some +minor differences in features and register layout. + +Required properties: +- compatible: must be "marvell,berlin2-clk" or "marvell,berlin2q-clk" +- #clock-cells: must be 1 +- clocks: must be the input parent clock phandle +- clock-names: name of the input parent clock + Allowed clock-names for the reference clocks are + "refclk" for the SoCs oscillator input on all SoCs, + and SoC-specific input clocks for + BG2/BG2CD: "video_ext0" for the external video clock input + + +Example: + +chip_clk: clock { + compatible = "marvell,berlin2q-clk"; + + #clock-cells = <1>; + clocks = <&refclk>; + clock-names = "refclk"; +}; diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt b/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt new file mode 100644 index 000000000000..809c5a2d8d9d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt @@ -0,0 +1,21 @@ +* Marvell PXA1928 Clock Controllers + +The PXA1928 clock subsystem generates and supplies clock to various +controllers within the PXA1928 SoC. The PXA1928 contains 3 clock controller +blocks called APMU, MPMU, and APBC roughly corresponding to internal buses. + +Required Properties: + +- compatible: should be one of the following. + - "marvell,pxa1928-apmu" - APMU controller compatible + - "marvell,pxa1928-mpmu" - MPMU controller compatible + - "marvell,pxa1928-apbc" - APBC controller compatible +- reg: physical base address of the clock controller and length of memory mapped + region. +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Each clock is assigned an identifier and client nodes use the clock controller +phandle and this identifier to specify the clock which they consume. + +All these identifiers can be found in <dt-bindings/clock/marvell,pxa1928.h>. diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt index dc5ea5b22da9..670c2af3e931 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt @@ -23,6 +23,14 @@ The following is a list of provided IDs and clock names on Armada 380/385: 2 = l2clk (L2 Cache clock) 3 = ddrclk (DDR clock) +The following is a list of provided IDs and clock names on Armada 39x: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU clock) + 2 = nbclk (Coherent Fabric clock) + 3 = hclk (SDRAM Controller Internal Clock) + 4 = dclk (SDRAM Interface Clock) + 5 = refclk (Reference Clock) + The following is a list of provided IDs and clock names on Kirkwood and Dove: 0 = tclk (Internal Bus clock) 1 = cpuclk (CPU0 clock) @@ -39,6 +47,7 @@ Required properties: "marvell,armada-370-core-clock" - For Armada 370 SoC core clocks "marvell,armada-375-core-clock" - For Armada 375 SoC core clocks "marvell,armada-380-core-clock" - For Armada 380/385 SoC core clocks + "marvell,armada-390-core-clock" - For Armada 39x SoC core clocks "marvell,armada-xp-core-clock" - For Armada XP SoC core clocks "marvell,dove-core-clock" - for Dove SoC core clocks "marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180) diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt index 76477be742b2..660e64912cce 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt @@ -1,6 +1,6 @@ * Gated Clock bindings for Marvell EBU SoCs -Marvell Armada 370/375/380/385/XP, Dove and Kirkwood allow some +Marvell Armada 370/375/380/385/39x/XP, Dove and Kirkwood allow some peripheral clocks to be gated to save some power. The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to the @@ -19,6 +19,7 @@ ID Clock Peripheral 9 pex1 PCIe Cntrl 1 15 sata0 SATA Host 0 17 sdio SDHCI Host +23 crypto CESA (crypto engine) 25 tdm Time Division Mplx 28 ddr DDR Cntrl 30 sata1 SATA Host 0 @@ -77,6 +78,18 @@ ID Clock Peripheral 28 xor1 XOR 1 30 sata1 SATA 1 +The following is a list of provided IDs for Armada 39x: +ID Clock Peripheral +----------------------------------- +5 pex1 PCIe 1 +6 pex2 PCIe 2 +7 pex3 PCIe 3 +8 pex0 PCIe 0 +9 usb3h0 USB3 Host 0 +17 sdio SDIO +22 xor0 XOR 0 +28 xor1 XOR 1 + The following is a list of provided IDs for Armada XP: ID Clock Peripheral ----------------------------------- @@ -152,6 +165,7 @@ Required properties: "marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating "marvell,armada-375-gating-clock" - for Armada 375 SoC clock gating "marvell,armada-380-gating-clock" - for Armada 380/385 SoC clock gating + "marvell,armada-390-gating-clock" - for Armada 39x SoC clock gating "marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating "marvell,dove-gating-clock" - for Dove SoC clock gating "marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt index c6620bc96703..7f02fb4ca4ad 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt @@ -20,15 +20,38 @@ Required properties : - #reset-cells : Should be 1. In clock consumers, this cell represents the bit number in the CAR's array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. +- nvidia,external-memory-controller : phandle of the EMC driver. + +The node should contain a "emc-timings" subnode for each supported RAM type (see +field RAM_CODE in register PMC_STRAPPING_OPT_A). + +Required properties for "emc-timings" nodes : +- nvidia,ram-code : Should contain the value of RAM_CODE this timing set + is used for. + +Each "emc-timings" node should contain a "timing" subnode for every supported +EMC clock rate. + +Required properties for "timing" nodes : +- clock-frequency : Should contain the memory clock rate to which this timing +relates. +- nvidia,parent-clock-frequency : Should contain the rate at which the current +parent of the EMC clock should be running at this timing. +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entries: + - emc-parent : the clock that should be the parent of the EMC clock at this +timing. Example SoC include file: / { - tegra_car: clock { + tegra_car: clock@60006000 { compatible = "nvidia,tegra124-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + nvidia,external-memory-controller = <&emc>; }; usb@c5004000 { @@ -62,4 +85,23 @@ Example board file: &tegra_car { clocks = <&clk_32k> <&osc>; }; + + clock@60006000 { + emc-timings-3 { + nvidia,ram-code = <3>; + + timing-12750000 { + clock-frequency = <12750000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-20400000 { + clock-frequency = <20400000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + }; + }; }; diff --git a/Documentation/devicetree/bindings/clock/pistachio-clock.txt b/Documentation/devicetree/bindings/clock/pistachio-clock.txt new file mode 100644 index 000000000000..868db499eed2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/pistachio-clock.txt @@ -0,0 +1,123 @@ +Imagination Technologies Pistachio SoC clock controllers +======================================================== + +Pistachio has four clock controllers (core clock, peripheral clock, peripheral +general control, and top general control) which are instantiated individually +from the device-tree. + +External clocks: +---------------- + +There are three external inputs to the clock controllers which should be +defined with the following clock-output-names: +- "xtal": External 52Mhz oscillator (required) +- "audio_clk_in": Alternate audio reference clock (optional) +- "enet_clk_in": Alternate ethernet PHY clock (optional) + +Core clock controller: +---------------------- + +The core clock controller generates clocks for the CPU, RPU (WiFi + BT +co-processor), audio, and several peripherals. + +Required properties: +- compatible: Must be "img,pistachio-clk". +- reg: Must contain the base address and length of the core clock controller. +- #clock-cells: Must be 1. The single cell is the clock identifier. + See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. +- clocks: Must contain an entry for each clock in clock-names. +- clock-names: Must include "xtal" (see "External clocks") and + "audio_clk_in_gate", "enet_clk_in_gate" which are generated by the + top-level general control. + +Example: + clk_core: clock-controller@18144000 { + compatible = "img,pistachio-clk"; + reg = <0x18144000 0x800>; + clocks = <&xtal>, <&cr_top EXT_CLK_AUDIO_IN>, + <&cr_top EXT_CLK_ENET_IN>; + clock-names = "xtal", "audio_clk_in_gate", "enet_clk_in_gate"; + + #clock-cells = <1>; + }; + +Peripheral clock controller: +---------------------------- + +The peripheral clock controller generates clocks for the DDR, ROM, and other +peripherals. The peripheral system clock ("periph_sys") generated by the core +clock controller is the input clock to the peripheral clock controller. + +Required properties: +- compatible: Must be "img,pistachio-periph-clk". +- reg: Must contain the base address and length of the peripheral clock + controller. +- #clock-cells: Must be 1. The single cell is the clock identifier. + See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. +- clocks: Must contain an entry for each clock in clock-names. +- clock-names: Must include "periph_sys", the peripheral system clock generated + by the core clock controller. + +Example: + clk_periph: clock-controller@18144800 { + compatible = "img,pistachio-clk-periph"; + reg = <0x18144800 0x800>; + clocks = <&clk_core CLK_PERIPH_SYS>; + clock-names = "periph_sys"; + + #clock-cells = <1>; + }; + +Peripheral general control: +--------------------------- + +The peripheral general control block generates system interface clocks and +resets for various peripherals. It also contains miscellaneous peripheral +control registers. The system clock ("sys") generated by the peripheral clock +controller is the input clock to the system clock controller. + +Required properties: +- compatible: Must include "img,pistachio-periph-cr" and "syscon". +- reg: Must contain the base address and length of the peripheral general + control registers. +- #clock-cells: Must be 1. The single cell is the clock identifier. + See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. +- clocks: Must contain an entry for each clock in clock-names. +- clock-names: Must include "sys", the system clock generated by the peripheral + clock controller. + +Example: + cr_periph: syscon@18144800 { + compatible = "img,pistachio-cr-periph", "syscon"; + reg = <0x18148000 0x1000>; + clocks = <&clock_periph PERIPH_CLK_PERIPH_SYS>; + clock-names = "sys"; + + #clock-cells = <1>; + }; + +Top-level general control: +-------------------------- + +The top-level general control block contains miscellaneous control registers and +gates for the external clocks "audio_clk_in" and "enet_clk_in". + +Required properties: +- compatible: Must include "img,pistachio-cr-top" and "syscon". +- reg: Must contain the base address and length of the top-level + control registers. +- clocks: Must contain an entry for each clock in clock-names. +- clock-names: Two optional clocks, "audio_clk_in" and "enet_clk_in" (see + "External clocks"). +- #clock-cells: Must be 1. The single cell is the clock identifier. + See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers. + +Example: + cr_top: syscon@18144800 { + compatible = "img,pistachio-cr-top", "syscon"; + reg = <0x18149000 0x200>; + clocks = <&audio_refclk>, <&ext_enet_in>; + clock-names = "audio_clk_in", "enet_clk_in"; + + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/pwm-clock.txt b/Documentation/devicetree/bindings/clock/pwm-clock.txt new file mode 100644 index 000000000000..83db876b3b90 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/pwm-clock.txt @@ -0,0 +1,26 @@ +Binding for an external clock signal driven by a PWM pin. + +This binding uses the common clock binding[1] and the common PWM binding[2]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/pwm/pwm.txt + +Required properties: +- compatible : shall be "pwm-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- pwms : from common PWM binding; this determines the clock frequency + via the period given in the PWM specifier. + +Optional properties: +- clock-output-names : From common clock binding. +- clock-frequency : Exact output frequency, in case the PWM period + is not exact but was rounded to nanoseconds. + +Example: + clock { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "mipi_mclk"; + pwms = <&pwm2 0 40>; /* 1 / 40 ns = 25 MHz */ + }; diff --git a/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt new file mode 100644 index 000000000000..e0fc2c11dd00 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt @@ -0,0 +1,33 @@ +Binding for Qualcomm Atheros AR7xxx/AR9XXX PLL controller + +The PPL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB. + +Required Properties: +- compatible: has to be "qca,<soctype>-cpu-intc" and one of the following + fallbacks: + - "qca,ar7100-pll" + - "qca,ar7240-pll" + - "qca,ar9130-pll" + - "qca,ar9330-pll" + - "qca,ar9340-pll" + - "qca,qca9550-pll" +- reg: Base address and size of the controllers memory area +- clock-names: Name of the input clock, has to be "ref" +- clocks: phandle of the external reference clock +- #clock-cells: has to be one + +Optional properties: +- clock-output-names: should be "cpu", "ddr", "ahb" + +Example: + + memory-controller@18050000 { + compatible = "qca,ar9132-ppl", "qca,ar9130-pll"; + reg = <0x18050000 0x20>; + + clock-names = "ref"; + clocks = <&extosc>; + + #clock-cells = <1>; + clock-output-names = "cpu", "ddr", "ahb"; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt index aba3d254e037..54c23f34f194 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -8,6 +8,7 @@ Required properties : "qcom,gcc-apq8084" "qcom,gcc-ipq8064" "qcom,gcc-msm8660" + "qcom,gcc-msm8916" "qcom,gcc-msm8960" "qcom,gcc-msm8974" "qcom,gcc-msm8974pro" diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt index 054f65f9319c..5ddb68418655 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt @@ -10,9 +10,11 @@ Required Properties: - "renesas,r8a73a4-div6-clock" for R8A73A4 (R-Mobile APE6) DIV6 clocks - "renesas,r8a7740-div6-clock" for R8A7740 (R-Mobile A1) DIV6 clocks - "renesas,r8a7790-div6-clock" for R8A7790 (R-Car H2) DIV6 clocks - - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2) DIV6 clocks + - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2-W) DIV6 clocks + - "renesas,r8a7793-div6-clock" for R8A7793 (R-Car M2-N) DIV6 clocks + - "renesas,r8a7794-div6-clock" for R8A7794 (R-Car E2) DIV6 clocks - "renesas,sh73a0-div6-clock" for SH73A0 (SH-Mobile AG5) DIV6 clocks - - "renesas,cpg-div6-clock" for generic DIV6 clocks + and "renesas,cpg-div6-clock" as a fallback. - reg: Base address and length of the memory resource used by the DIV6 clock - clocks: Reference to the parent clock(s); either one, four, or eight clocks must be specified. For clocks with multiple parents, invalid diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt index 0a80fa70ca26..16ed18155160 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt @@ -13,12 +13,14 @@ Required Properties: - "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks - "renesas,r8a73a4-mstp-clocks" for R8A73A4 (R-Mobile APE6) MSTP gate clocks - "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks + - "renesas,r8a7778-mstp-clocks" for R8A7778 (R-Car M1) MSTP gate clocks - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks - - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks + - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2-W) MSTP gate clocks + - "renesas,r8a7793-mstp-clocks" for R8A7793 (R-Car M2-N) MSTP gate clocks - "renesas,r8a7794-mstp-clocks" for R8A7794 (R-Car E2) MSTP gate clocks - "renesas,sh73a0-mstp-clocks" for SH73A0 (SH-MobileAG5) MSTP gate clocks - - "renesas,cpg-mstp-clock" for generic MSTP gate clocks + and "renesas,cpg-mstp-clocks" as a fallback. - reg: Base address and length of the I/O mapped registers used by the MSTP clocks. The first register is the clock control register and is mandatory. The second register is the clock status register and is optional when not diff --git a/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt b/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt new file mode 100644 index 000000000000..36c2b528245c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt @@ -0,0 +1,24 @@ +* Renesas H8/300 divider clock + +Required Properties: + + - compatible: Must be "renesas,sh73a0-h8300-div-clock" + + - clocks: Reference to the parent clocks ("extal1" and "extal2") + + - #clock-cells: Must be 1 + + - reg: Base address and length of the divide rate selector + + - renesas,width: bit width of selector + +Example +------- + + cclk: cclk { + compatible = "renesas,h8300-div-clock"; + clocks = <&xclk>; + #clock-cells = <0>; + reg = <0xfee01b 2>; + renesas,width = <2>; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt b/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt new file mode 100644 index 000000000000..500cdadbceb7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt @@ -0,0 +1,23 @@ +Renesas H8S2678 PLL clock + +This device is Clock multiplyer + +Required Properties: + + - compatible: Must be "renesas,h8s2678-pll-clock" + + - clocks: Reference to the parent clocks + + - #clock-cells: Must be 0 + + - reg: Two rate selector (Multiply / Divide) register address + +Example +------- + + pllclk: pllclk { + compatible = "renesas,h8s2678-pll-clock"; + clocks = <&xclk>; + #clock-cells = <0>; + reg = <0xfee03b 2>, <0xfee045 2>; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt new file mode 100644 index 000000000000..2f3747fdcf1c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt @@ -0,0 +1,25 @@ +* Renesas R8A7778 Clock Pulse Generator (CPG) + +The CPG generates core clocks for the R8A7778. It includes two PLLs and +several fixed ratio dividers + +Required Properties: + + - compatible: Must be "renesas,r8a7778-cpg-clocks" + - reg: Base address and length of the memory resource used by the CPG + - #clock-cells: Must be 1 + - clock-output-names: The names of the clocks. Supported clocks are + "plla", "pllb", "b", "out", "p", "s", and "s1". + + +Example +------- + + cpg_clocks: cpg_clocks@ffc80000 { + compatible = "renesas,r8a7778-cpg-clocks"; + reg = <0xffc80000 0x80>; + #clock-cells = <1>; + clocks = <&extal_clk>; + clock-output-names = "plla", "pllb", "b", + "out", "p", "s", "s1"; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt index b02944fba9de..56f111bd3e45 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt @@ -10,7 +10,7 @@ Required Properties: - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG - "renesas,r8a7793-cpg-clocks" for the r8a7793 CPG - "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG - - "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG + and "renesas,rcar-gen2-cpg-clocks" as a fallback. - reg: Base address and length of the memory resource used by the CPG diff --git a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt index 98a257492522..b0f7ddb8cdb1 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt @@ -7,7 +7,7 @@ Required Properties: - compatible: Must be one of - "renesas,r7s72100-cpg-clocks" for the r7s72100 CPG - - "renesas,rz-cpg-clocks" for the generic RZ CPG + and "renesas,rz-cpg-clocks" as a fallback. - reg: Base address and length of the memory resource used by the CPG - clocks: References to possible parent clocks. Order must match clock modes in the datasheet. For the r7s72100, this is extal, usb_x1. diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt index c40711e8e8f7..28b28309f535 100644 --- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt @@ -17,7 +17,8 @@ Required properties: - #clock-cells: from common clock binding; shall be set to 1. - clocks: from common clock binding; list of parent clock handles, shall be xtal reference clock or xtal and clkin for - si5351c only. + si5351c only. Corresponding clock input names are "xtal" and + "clkin" respectively. - #address-cells: shall be set to 1. - #size-cells: shall be set to 0. @@ -71,6 +72,7 @@ i2c-master-node { /* connect xtal input to 25MHz reference */ clocks = <&ref25>; + clock-names = "xtal"; /* connect xtal input as source of pll0 and pll1 */ silabs,pll-source = <0 0>, <1 0>; diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt new file mode 100644 index 000000000000..fee3205cdff9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt @@ -0,0 +1,65 @@ +STMicroelectronics STM32 Reset and Clock Controller +=================================================== + +The RCC IP is both a reset and a clock controller. This documentation only +describes the clock part. + +Please also refer to clock-bindings.txt in this directory for common clock +controller binding usage. + +Required properties: +- compatible: Should be "st,stm32f42xx-rcc" +- reg: should be register base and length as documented in the + datasheet +- #clock-cells: 2, device nodes should specify the clock in their "clocks" + property, containing a phandle to the clock device node, an index selecting + between gated clocks and other clocks and an index specifying the clock to + use. + +Example: + + rcc: rcc@40023800 { + #clock-cells = <2> + compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; + reg = <0x40023800 0x400>; + }; + +Specifying gated clocks +======================= + +The primary index must be set to 0. + +The secondary index is the bit number within the RCC register bank, starting +from the first RCC clock enable register (RCC_AHB1ENR, address offset 0x30). + +It is calculated as: index = register_offset / 4 * 32 + bit_offset. +Where bit_offset is the bit offset within the register (LSB is 0, MSB is 31). + +Example: + + /* Gated clock, AHB1 bit 0 (GPIOA) */ + ... { + clocks = <&rcc 0 0> + }; + + /* Gated clock, AHB2 bit 4 (CRYP) */ + ... { + clocks = <&rcc 0 36> + }; + +Specifying other clocks +======================= + +The primary index must be set to 1. + +The secondary index is bound with the following magic numbers: + + 0 SYSTICK + 1 FCLK + +Example: + + /* Misc clock, FCLK */ + ... { + clocks = <&rcc 1 1> + }; diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 60b44285250d..8a47b77abfca 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -20,6 +20,7 @@ Required properties: "allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23 "allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates "allwinner,sun4i-a10-ahb-clk" - for the AHB clock + "allwinner,sun5i-a13-ahb-clk" - for the AHB clock on A13 "allwinner,sun9i-a80-ahb-clk" - for the AHB bus clocks on A80 "allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10 "allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13 @@ -66,6 +67,9 @@ Required properties: "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20 "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13 "allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31 + "allwinner,sun8i-a23-usb-clk" - for usb gates + resets on A23 + "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80 + "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80 Required properties for all clocks: - reg : shall be the control register address for the clock. diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.txt b/Documentation/devicetree/bindings/clock/ti,cdce925.txt new file mode 100644 index 000000000000..4c7669ad681b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti,cdce925.txt @@ -0,0 +1,42 @@ +Binding for TO CDCE925 programmable I2C clock synthesizers. + +Reference +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] http://www.ti.com/product/cdce925 + +The driver provides clock sources for each output Y1 through Y5. + +Required properties: + - compatible: Shall be "ti,cdce925" + - reg: I2C device address. + - clocks: Points to a fixed parent clock that provides the input frequency. + - #clock-cells: From common clock bindings: Shall be 1. + +Optional properties: + - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a + board, or to compensate for external influences. + +For both PLL1 and PLL2 an optional child node can be used to specify spread +spectrum clocking parameters for a board. + - spread-spectrum: SSC mode as defined in the data sheet. + - spread-spectrum-center: Use "centered" mode instead of "max" mode. When + present, the clock runs at the requested frequency on average. Otherwise + the requested frequency is the maximum value of the SCC range. + + +Example: + + clockgen: cdce925pw@64 { + compatible = "cdce925"; + reg = <0x64>; + clocks = <&xtal_27Mhz>; + #clock-cells = <1>; + xtal-load-pf = <5>; + /* PLL options to get SSC 1% centered */ + PLL2 { + spread-spectrum = <4>; + spread-spectrum-center; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/zx296702-clk.txt b/Documentation/devicetree/bindings/clock/zx296702-clk.txt new file mode 100644 index 000000000000..750442b65505 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/zx296702-clk.txt @@ -0,0 +1,35 @@ +Device Tree Clock bindings for ZTE zx296702 + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of the following: + "zte,zx296702-topcrm-clk": + zx296702 top clock selection, divider and gating + + "zte,zx296702-lsp0crpm-clk" and + "zte,zx296702-lsp1crpm-clk": + zx296702 device level clock selection and gating + +- reg: Address and length of the register set + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h +for the full list of zx296702 clock IDs. + + +topclk: topcrm@0x09800000 { + compatible = "zte,zx296702-topcrm-clk"; + reg = <0x09800000 0x1000>; + #clock-cells = <1>; +}; + +uart0: serial@0x09405000 { + compatible = "zte,zx296702-uart"; + reg = <0x09405000 0x1000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lsp1clk ZX296702_UART0_PCLK>; + status = "disabled"; +}; |