diff options
Diffstat (limited to 'Documentation/devicetree/bindings/clock')
12 files changed, 352 insertions, 384 deletions
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml index 1174c9aa9934..5ad147d265e6 100644 --- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml @@ -61,7 +61,7 @@ properties: maxItems: 1 '#clock-cells': - const: 1 + true clock-output-names: minItems: 1 @@ -74,6 +74,23 @@ allOf: contains: enum: - brcm,cygnus-armpll + - brcm,nsp-armpll + then: + properties: + '#clock-cells': + const: 0 + else: + properties: + '#clock-cells': + const: 1 + required: + - clock-output-names + - if: + properties: + compatible: + contains: + enum: + - brcm,cygnus-armpll - brcm,cygnus-genpll - brcm,cygnus-lcpll0 - brcm,cygnus-mipipll @@ -358,7 +375,6 @@ required: - reg - clocks - '#clock-cells' - - clock-output-names additionalProperties: false @@ -392,3 +408,10 @@ examples: clocks = <&osc2>; clock-output-names = "keypad", "adc/touch", "pwm"; }; + - | + arm_clk@0 { + #clock-cells = <0>; + compatible = "brcm,nsp-armpll"; + clocks = <&osc>; + reg = <0x0 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt deleted file mode 100644 index 6030afb10b5c..000000000000 --- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt +++ /dev/null @@ -1,103 +0,0 @@ -* Samsung Audio Subsystem Clock Controller - -The Samsung Audio Subsystem clock controller generates and supplies clocks -to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock -binding described here is applicable to all SoCs in Exynos family. - -Required Properties: - -- compatible: should be one of the following: - - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs. - - "samsung,exynos5250-audss-clock" - controller compatible with Exynos5250 - SoCs. - - "samsung,exynos5410-audss-clock" - controller compatible with Exynos5410 - SoCs. - - "samsung,exynos5420-audss-clock" - controller compatible with Exynos5420 - SoCs. -- reg: physical base address and length of the controller's register set. - -- #clock-cells: should be 1. - -- clocks: - - pll_ref: Fixed rate PLL reference clock, parent of mout_audss. "fin_pll" - is used if not specified. - - pll_in: Input PLL to the AudioSS block, parent of mout_audss. "fout_epll" - is used if not specified. - - cdclk: External i2s clock, parent of mout_i2s. "cdclk0" is used if not - specified. - - sclk_audio: Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if - not specified. - - sclk_pcm_in: PCM clock, parent of sclk_pcm. "sclk_pcm0" is used if not - specified. - -- clock-names: Aliases for the above clocks. They should be "pll_ref", - "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively. - -Optional Properties: - - - power-domains: a phandle to respective power domain node as described by - generic PM domain bindings (see power/power_domain.txt for more - information). - -The following is the list of clocks generated by the controller. Each clock is -assigned an identifier and client nodes use this identifier to specify the -clock which they consume. Some of the clocks are available only on a particular -Exynos4 SoC and this is specified where applicable. - -Provided clocks: - -Clock ID SoC (if specific) ------------------------------------------------ - -mout_audss 0 -mout_i2s 1 -dout_srp 2 -dout_aud_bus 3 -dout_i2s 4 -srp_clk 5 -i2s_bus 6 -sclk_i2s 7 -pcm_bus 8 -sclk_pcm 9 -adma 10 Exynos5420 - -Example 1: An example of a clock controller node using the default input - clock names is listed below. - -clock_audss: audss-clock-controller@3810000 { - compatible = "samsung,exynos5250-audss-clock"; - reg = <0x03810000 0x0C>; - #clock-cells = <1>; -}; - -Example 2: An example of a clock controller node with the input clocks - specified. - -clock_audss: audss-clock-controller@3810000 { - compatible = "samsung,exynos5250-audss-clock"; - reg = <0x03810000 0x0C>; - #clock-cells = <1>; - clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>, - <&ext_i2s_clk>; - clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk"; -}; - -Example 3: I2S controller node that consumes the clock generated by the clock - controller. Refer to the standard clock bindings for information - about 'clocks' and 'clock-names' property. - -i2s0: i2s@3830000 { - compatible = "samsung,i2s-v5"; - reg = <0x03830000 0x100>; - dmas = <&pdma0 10 - &pdma0 9 - &pdma0 8>; - dma-names = "tx", "rx", "tx-sec"; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>, - <&clock_audss EXYNOS_MOUT_AUDSS>, - <&clock_audss EXYNOS_MOUT_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1", - "mout_audss", "mout_i2s"; -}; diff --git a/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt b/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt deleted file mode 100644 index f6272dcd96f4..000000000000 --- a/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt +++ /dev/null @@ -1,53 +0,0 @@ -* Samsung Audio Subsystem Clock Controller - -The Samsung Audio Subsystem clock controller generates and supplies clocks -to Audio Subsystem block available in the S5PV210 and compatible SoCs. - -Required Properties: - -- compatible: should be "samsung,s5pv210-audss-clock". -- reg: physical base address and length of the controller's register set. - -- #clock-cells: should be 1. - -- clocks: - - hclk: AHB bus clock of the Audio Subsystem. - - xxti: Optional fixed rate PLL reference clock, parent of mout_audss. If - not specified (i.e. xusbxti is used for PLL reference), it is fixed to - a clock named "xxti". - - fout_epll: Input PLL to the AudioSS block, parent of mout_audss. - - iiscdclk0: Optional external i2s clock, parent of mout_i2s. If not - specified, it is fixed to a clock named "iiscdclk0". - - sclk_audio0: Audio bus clock, parent of mout_i2s. - -- clock-names: Aliases for the above clocks. They should be "hclk", - "xxti", "fout_epll", "iiscdclk0", and "sclk_audio0" respectively. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/s5pv210-audss-clk.h header and can be used in device -tree sources. - -Example: Clock controller node. - - clk_audss: clock-controller@c0900000 { - compatible = "samsung,s5pv210-audss-clock"; - reg = <0xc0900000 0x1000>; - #clock-cells = <1>; - clock-names = "hclk", "xxti", - "fout_epll", "sclk_audio0"; - clocks = <&clocks DOUT_HCLKP>, <&xxti>, - <&clocks FOUT_EPLL>, <&clocks SCLK_AUDIO0>; - }; - -Example: I2S controller node that consumes the clock generated by the clock - controller. Refer to the standard clock bindings for information - about 'clocks' and 'clock-names' property. - - i2s0: i2s@3830000 { - /* ... */ - clock-names = "iis", "i2s_opclk0", - "i2s_opclk1"; - clocks = <&clk_audss CLK_I2S>, <&clk_audss CLK_I2S>, - <&clk_audss CLK_DOUT_AUD_BUS>; - /* ... */ - }; diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt deleted file mode 100644 index 7441ed519f02..000000000000 --- a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt +++ /dev/null @@ -1,57 +0,0 @@ -* Samsung Exynos3250 Clock Controller - -The Exynos3250 clock controller generates and supplies clock to various -controllers within the Exynos3250 SoC. - -Required Properties: - -- compatible: should be one of the following. - - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC. - - "samsung,exynos3250-cmu-dmc" - controller compatible with - Exynos3250 SoC for Dynamic Memory Controller domain. - - "samsung,exynos3250-cmu-isp" - ISP block clock controller compatible - with Exynos3250 SOC - -- reg: physical base address of the controller and length of memory mapped - region. - -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/exynos3250.h header and can be used in device -tree sources. - -Example 1: Examples of clock controller nodes are listed below. - - cmu: clock-controller@10030000 { - compatible = "samsung,exynos3250-cmu"; - reg = <0x10030000 0x20000>; - #clock-cells = <1>; - }; - - cmu_dmc: clock-controller@105c0000 { - compatible = "samsung,exynos3250-cmu-dmc"; - reg = <0x105C0000 0x2000>; - #clock-cells = <1>; - }; - - cmu_isp: clock-controller@10048000 { - compatible = "samsung,exynos3250-cmu-isp"; - reg = <0x10048000 0x1000>; - #clock-cells = <1>; - }; - -Example 2: UART controller node that consumes the clock generated by the clock - controller. Refer to the standard clock bindings for information - about 'clocks' and 'clock-names' property. - - serial@13800000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13800000 0x100>; - interrupts = <0 109 0>; - clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>; - clock-names = "uart", "clk_uart_baud0"; - }; diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt deleted file mode 100644 index 17bb11365354..000000000000 --- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt +++ /dev/null @@ -1,86 +0,0 @@ -* Samsung Exynos4 Clock Controller - -The Exynos4 clock controller generates and supplies clock to various controllers -within the Exynos4 SoC. The clock binding described here is applicable to all -SoC's in the Exynos4 family. - -Required Properties: - -- compatible: should be one of the following. - - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC. - - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC. - -- reg: physical base address of the controller and length of memory mapped - region. - -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/exynos4.h header and can be used in device -tree sources. - -Example 1: An example of a clock controller node is listed below. - - clock: clock-controller@10030000 { - compatible = "samsung,exynos4210-clock"; - reg = <0x10030000 0x20000>; - #clock-cells = <1>; - }; - -Example 2: UART controller node that consumes the clock generated by the clock - controller. Refer to the standard clock bindings for information - about 'clocks' and 'clock-names' property. - - serial@13820000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13820000 0x100>; - interrupts = <0 54 0>; - clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; - clock-names = "uart", "clk_uart_baud0"; - }; - -Exynos4412 SoC contains some additional clocks for FIMC-ISP (Camera ISP) -subsystem. Registers for those clocks are located in the ISP power domain. -Because those registers are also located in a different memory region than -the main clock controller, a separate clock controller has to be defined for -handling them. - -Required Properties: - -- compatible: should be "samsung,exynos4412-isp-clock". - -- reg: physical base address of the ISP clock controller and length of memory - mapped region. - -- #clock-cells: should be 1. - -- clocks: list of the clock controller input clock identifiers, - from common clock bindings, should point to CLK_ACLK200 and - CLK_ACLK400_MCUISP clocks from the main clock controller. - -- clock-names: list of the clock controller input clock names, - as described in clock-bindings.txt, should be "aclk200" and - "aclk400_mcuisp". - -- power-domains: a phandle to ISP power domain node as described by - generic PM domain bindings. - -Example 3: The clock controllers bindings for Exynos4412 SoCs. - - clock: clock-controller@10030000 { - compatible = "samsung,exynos4412-clock"; - reg = <0x10030000 0x18000>; - #clock-cells = <1>; - }; - - isp_clock: clock-controller@10048000 { - compatible = "samsung,exynos4412-isp-clock"; - reg = <0x10048000 0x1000>; - #clock-cells = <1>; - power-domains = <&pd_isp>; - clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>; - clock-names = "aclk200", "aclk400_mcuisp"; - }; diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt deleted file mode 100644 index aff266a12eeb..000000000000 --- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Samsung Exynos5250 Clock Controller - -The Exynos5250 clock controller generates and supplies clock to various -controllers within the Exynos5250 SoC. - -Required Properties: - -- compatible: should be one of the following. - - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC. - -- reg: physical base address of the controller and length of memory mapped - region. - -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/exynos5250.h header and can be used in device -tree sources. - -Example 1: An example of a clock controller node is listed below. - - clock: clock-controller@10010000 { - compatible = "samsung,exynos5250-clock"; - reg = <0x10010000 0x30000>; - #clock-cells = <1>; - }; - -Example 2: UART controller node that consumes the clock generated by the clock - controller. Refer to the standard clock bindings for information - about 'clocks' and 'clock-names' property. - - serial@13820000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13820000 0x100>; - interrupts = <0 54 0>; - clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; - clock-names = "uart", "clk_uart_baud0"; - }; diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt deleted file mode 100644 index 717a7b1531c7..000000000000 --- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt +++ /dev/null @@ -1,42 +0,0 @@ -* Samsung Exynos5420 Clock Controller - -The Exynos5420 clock controller generates and supplies clock to various -controllers within the Exynos5420 SoC and for the Exynos5800 SoC. - -Required Properties: - -- compatible: should be one of the following. - - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC. - - "samsung,exynos5800-clock" - controller compatible with Exynos5800 SoC. - -- reg: physical base address of the controller and length of memory mapped - region. - -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/exynos5420.h header and can be used in device -tree sources. - -Example 1: An example of a clock controller node is listed below. - - clock: clock-controller@10010000 { - compatible = "samsung,exynos5420-clock"; - reg = <0x10010000 0x30000>; - #clock-cells = <1>; - }; - -Example 2: UART controller node that consumes the clock generated by the clock - controller. Refer to the standard clock bindings for information - about 'clocks' and 'clock-names' property. - - serial@13820000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13820000 0x100>; - interrupts = <0 54 0>; - clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; - clock-names = "uart", "clk_uart_baud0"; - }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml new file mode 100644 index 000000000000..f14f1d39da36 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos-audss-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Audio SubSystem clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/exynos-audss-clk.h header. + +properties: + compatible: + enum: + - samsung,exynos4210-audss-clock + - samsung,exynos5250-audss-clock + - samsung,exynos5410-audss-clock + - samsung,exynos5420-audss-clock + + clocks: + minItems: 2 + items: + - description: + Fixed rate PLL reference clock, parent of mout_audss. "fin_pll" is + used if not specified. + - description: + Input PLL to the AudioSS block, parent of mout_audss. "fout_epll" is + used if not specified. + - description: + Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if not + specified. + - description: + PCM clock, parent of sclk_pcm. "sclk_pcm0" is used if not specified. + - description: + External i2s clock, parent of mout_i2s. "cdclk0" is used if not + specified. + + clock-names: + minItems: 2 + items: + - const: pll_ref + - const: pll_in + - const: sclk_audio + - const: sclk_pcm_in + - const: cdclk + + "#clock-cells": + const: 1 + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - "#clock-cells" + - reg + +additionalProperties: false + +examples: + - | + clock-controller@3810000 { + compatible = "samsung,exynos5250-audss-clock"; + reg = <0x03810000 0x0c>; + #clock-cells = <1>; + clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>, <&ext_i2s_clk>; + clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk"; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml new file mode 100644 index 000000000000..4e8062860986 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + All available clocks are defined as preprocessor macros in + dt-bindings/clock/ headers. + +properties: + compatible: + oneOf: + - enum: + - samsung,exynos3250-cmu + - samsung,exynos3250-cmu-dmc + - samsung,exynos3250-cmu-isp + - samsung,exynos4210-clock + - samsung,exynos4412-clock + - samsung,exynos5250-clock + - items: + - enum: + - samsung,exynos5420-clock + - samsung,exynos5800-clock + - const: syscon + + clocks: + minItems: 1 + maxItems: 4 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5250.h> + clock: clock-controller@10010000 { + compatible = "samsung,exynos5250-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml new file mode 100644 index 000000000000..64d027dbe3b2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos-ext-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC external/osc/XXTI/XusbXTI clock + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Samsung SoCs require an external clock supplied through XXTI or XusbXTI pins. + +properties: + compatible: + enum: + - samsung,clock-xxti + - samsung,clock-xusbxti + - samsung,exynos5420-oscclk + + "#clock-cells": + const: 0 + + clock-frequency: true + + clock-output-names: + maxItems: 1 + +required: + - compatible + - clock-frequency + +additionalProperties: false + +examples: + - | + fixed-rate-clocks { + clock { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml new file mode 100644 index 000000000000..1ed64add4355 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynos4412-isp-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos4412 SoC ISP clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Clock controller for Samsung Exynos4412 SoC FIMC-ISP (Camera ISP) + All available clocks are defined as preprocessor macros in + dt-bindings/clock/ headers. + +properties: + compatible: + const: samsung,exynos4412-isp-clock + + clocks: + items: + - description: CLK_ACLK200 from the main clock controller + - description: CLK_ACLK400_MCUISP from the main clock controller + + clock-names: + items: + - const: aclk200 + - const: aclk400_mcuisp + + "#clock-cells": + const: 1 + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + - power-domains + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + clock-controller@10048000 { + compatible = "samsung,exynos4412-isp-clock"; + reg = <0x10048000 0x1000>; + #clock-cells = <1>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>; + clock-names = "aclk200", "aclk400_mcuisp"; + }; + diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml new file mode 100644 index 000000000000..ae8f8fc93233 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,s5pv210-audss-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5Pv210 SoC Audio SubSystem clock controller + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + All available clocks are defined as preprocessor macros in + include/dt-bindings/clock/s5pv210-audss.h header. + +properties: + compatible: + const: samsung,s5pv210-audss-clock + + clocks: + minItems: 4 + items: + - description: + AHB bus clock of the Audio Subsystem. + - description: + Optional fixed rate PLL reference clock, parent of mout_audss. If not + specified (i.e. xusbxti is used for PLL reference), it is fixed to a + clock named "xxti". + - description: + Input PLL to the AudioSS block, parent of mout_audss. + - description: + Audio bus clock, parent of mout_i2s. + - description: + Optional external i2s clock, parent of mout_i2s. If not specified, it + is fixed to a clock named "iiscdclk0". + + clock-names: + minItems: 4 + items: + - const: hclk + - const: xxti + - const: fout_epll + - const: sclk_audio0 + - const: iiscdclk0 + + "#clock-cells": + const: 1 + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - "#clock-cells" + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/s5pv210.h> + + clock-controller@c0900000 { + compatible = "samsung,s5pv210-audss-clock"; + reg = <0xc0900000 0x1000>; + #clock-cells = <1>; + clock-names = "hclk", "xxti", "fout_epll", "sclk_audio0"; + clocks = <&clocks DOUT_HCLKP>, <&xxti>, <&clocks FOUT_EPLL>, + <&clocks SCLK_AUDIO0>; + }; |