diff options
Diffstat (limited to 'Documentation/devicetree/bindings/clock')
-rw-r--r-- | Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt | 34 |
1 files changed, 28 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt index 965cfa42e025..6fc2fd8ce2f5 100644 --- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt +++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt @@ -11,6 +11,21 @@ enabled by these control bits, it might still not be running based on the base resource. Required properties: +- compatible: Should be one of: + "fsl,imx8qxp-lpcg" + "fsl,imx8qm-lpcg" followed by "fsl,imx8qxp-lpcg". +- reg: Address and length of the register set. +- #clock-cells: Should be 1. One LPCG supports multiple clocks. +- clocks: Input parent clocks phandle array for each clock. +- bit-offset: An integer array indicating the bit offset for each clock. +- hw-autogate: Boolean array indicating whether supports HW autogate for + each clock. +- clock-output-names: Shall be the corresponding names of the outputs. + NOTE this property must be specified in the same order + as the clock bit-offset and hw-autogate property. +- power-domains: Should contain the power domain used by this clock. + +Legacy binding (DEPRECATED): - compatible: Should be one of: "fsl,imx8qxp-lpcg-adma", "fsl,imx8qxp-lpcg-conn", @@ -33,10 +48,17 @@ Examples: #include <dt-bindings/clock/imx8qxp-clock.h> -conn_lpcg: clock-controller@5b200000 { - compatible = "fsl,imx8qxp-lpcg-conn"; - reg = <0x5b200000 0xb0000>; +sdhc0_lpcg: clock-controller@5b200000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b200000 0x10000>; #clock-cells = <1>; + clocks = <&sdhc0_clk IMX_SC_PM_CLK_PER>, + <&conn_ipg_clk>, <&conn_axi_clk>; + bit-offset = <0 16 20>; + clock-output-names = "sdhc0_lpcg_per_clk", + "sdhc0_lpcg_ipg_clk", + "sdhc0_lpcg_ahb_clk"; + power-domains = <&pd IMX_SC_R_SDHC_0>; }; usdhc1: mmc@5b010000 { @@ -44,8 +66,8 @@ usdhc1: mmc@5b010000 { interrupt-parent = <&gic>; interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b010000 0x10000>; - clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK>, - <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_PER_CLK>, - <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_HCLK>; + clocks = <&sdhc0_lpcg 1>, + <&sdhc0_lpcg 0>, + <&sdhc0_lpcg 2>; clock-names = "ipg", "per", "ahb"; }; |