diff options
Diffstat (limited to 'Documentation/devicetree/bindings/dma')
| -rw-r--r-- | Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml | 161 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/dma/snps-dma.txt | 69 |
2 files changed, 161 insertions, 69 deletions
diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml new file mode 100644 index 000000000000..e7611840a7cf --- /dev/null +++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/snps,dma-spear1340.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys Designware DMA Controller + +maintainers: + - Viresh Kumar <vireshk@kernel.org> + - Andy Shevchenko <andriy.shevchenko@linux.intel.com> + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + compatible: + const: snps,dma-spear1340 + + "#dma-cells": + const: 3 + description: | + First cell is a phandle pointing to the DMA controller. Second one is + the DMA request line number. Third cell is the memory master identifier + for transfers on dynamically allocated channel. Fourth cell is the + peripheral master identifier for transfers on an allocated channel. + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: AHB interface reference clock. + const: hclk + + dma-channels: + description: | + Number of DMA channels supported by the controller. In case if + not specified the driver will try to auto-detect this and + the rest of the optional parameters. + minimum: 1 + maximum: 8 + + dma-requests: + minimum: 1 + maximum: 16 + + dma-masters: + $ref: /schemas/types.yaml#definitions/uint32 + description: | + Number of DMA masters supported by the controller. In case if + not specified the driver will try to auto-detect this and + the rest of the optional parameters. + minimum: 1 + maximum: 4 + + chan_allocation_order: + $ref: /schemas/types.yaml#definitions/uint32 + description: | + DMA channels allocation order specifier. Zero means ascending order + (first free allocated), while one - descending (last free allocated). + default: 0 + enum: [0, 1] + + chan_priority: + $ref: /schemas/types.yaml#definitions/uint32 + description: | + DMA channels priority order. Zero means ascending channels priority + so the very first channel has the highest priority. While 1 means + descending priority (the last channel has the highest priority). + default: 0 + enum: [0, 1] + + block_size: + $ref: /schemas/types.yaml#definitions/uint32 + description: Maximum block size supported by the DMA controller. + enum: [3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095] + + data-width: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: Data bus width per each DMA master in bytes. + items: + maxItems: 4 + items: + enum: [4, 8, 16, 32] + + data_width: + $ref: /schemas/types.yaml#/definitions/uint32-array + deprecated: true + description: | + Data bus width per each DMA master in (2^n * 8) bits. This property is + deprecated. It' usage is discouraged in favor of data-width one. Moreover + the property incorrectly permits to define data-bus width of 8 and 16 + bits, which is impossible in accordance with DW DMAC IP-core data book. + items: + maxItems: 4 + items: + enum: + - 0 # 8 bits + - 1 # 16 bits + - 2 # 32 bits + - 3 # 64 bits + - 4 # 128 bits + - 5 # 256 bits + default: 0 + + multi-block: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + LLP-based multi-block transfer supported by hardware per + each DMA channel. + items: + maxItems: 8 + items: + enum: [0, 1] + default: 1 + + snps,dma-protection-control: + $ref: /schemas/types.yaml#definitions/uint32 + description: | + Bits one-to-one passed to the AHB HPROT[3:1] bus. Each bit setting + indicates the following features: bit 0 - privileged mode, + bit 1 - DMA is bufferable, bit 2 - DMA is cacheable. + default: 0 + minimum: 0 + maximum: 7 + +unevaluatedProperties: false + +required: + - compatible + - "#dma-cells" + - reg + - interrupts + +examples: + - | + dma-controller@fc000000 { + compatible = "snps,dma-spear1340"; + reg = <0xfc000000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <12>; + + dma-channels = <8>; + dma-requests = <16>; + dma-masters = <4>; + #dma-cells = <3>; + + chan_allocation_order = <1>; + chan_priority = <1>; + block_size = <0xfff>; + data-width = <8 8>; + multi-block = <0 0 0 0 0 0 0 0>; + snps,max-burst-len = <16 16 4 4 4 4 4 4>; + }; +... diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt deleted file mode 100644 index 0bedceed1963..000000000000 --- a/Documentation/devicetree/bindings/dma/snps-dma.txt +++ /dev/null @@ -1,69 +0,0 @@ -* Synopsys Designware DMA Controller - -Required properties: -- compatible: "snps,dma-spear1340" -- reg: Address range of the DMAC registers -- interrupt: Should contain the DMAC interrupt number -- dma-channels: Number of channels supported by hardware -- dma-requests: Number of DMA request lines supported, up to 16 -- dma-masters: Number of AHB masters supported by the controller -- #dma-cells: must be <3> -- chan_allocation_order: order of allocation of channel, 0 (default): ascending, - 1: descending -- chan_priority: priority of channels. 0 (default): increase from chan 0->n, 1: - increase from chan n->0 -- block_size: Maximum block size supported by the controller -- data-width: Maximum data width supported by hardware per AHB master - (in bytes, power of 2) - - -Deprecated properties: -- data_width: Maximum data width supported by hardware per AHB master - (0 - 8bits, 1 - 16bits, ..., 5 - 256bits) - - -Optional properties: -- multi-block: Multi block transfers supported by hardware. Array property with - one cell per channel. 0: not supported, 1 (default): supported. -- snps,dma-protection-control: AHB HPROT[3:1] protection setting. - The default value is 0 (for non-cacheable, non-buffered, - unprivileged data access). - Refer to include/dt-bindings/dma/dw-dmac.h for possible values. - -Example: - - dmahost: dma@fc000000 { - compatible = "snps,dma-spear1340"; - reg = <0xfc000000 0x1000>; - interrupt-parent = <&vic1>; - interrupts = <12>; - - dma-channels = <8>; - dma-requests = <16>; - dma-masters = <2>; - #dma-cells = <3>; - chan_allocation_order = <1>; - chan_priority = <1>; - block_size = <0xfff>; - data-width = <8 8>; - }; - -DMA clients connected to the Designware DMA controller must use the format -described in the dma.txt file, using a four-cell specifier for each channel. -The four cells in order are: - -1. A phandle pointing to the DMA controller -2. The DMA request line number -3. Memory master for transfers on allocated channel -4. Peripheral master for transfers on allocated channel - -Example: - - serial@e0000000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0xe0000000 0x1000>; - interrupts = <0 35 0x4>; - dmas = <&dmahost 12 0 1>, - <&dmahost 13 1 0>; - dma-names = "rx", "rx"; - }; |