summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml')
-rw-r--r--Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml101
1 files changed, 101 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml b/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
new file mode 100644
index 000000000000..79c13b408eda
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/atmel,sama5d2-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AT91 SAMA5D2 Analog to Digital Converter (ADC)
+
+maintainers:
+ - Ludovic Desroches <ludovic.desroches@atmel.com>
+ - Eugen Hristev <eugen.hristev@microchip.com>
+
+properties:
+ compatible:
+ enum:
+ - atmel,sama5d2-adc
+ - microchip,sam9x60-adc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: adc_clk
+
+ vref-supply: true
+ vddana-supply: true
+
+ atmel,min-sample-rate-hz:
+ description: Minimum sampling rate, it depends on SoC.
+
+ atmel,max-sample-rate-hz:
+ description: Maximum sampling rate, it depends on SoC.
+
+ atmel,startup-time-ms:
+ description: Startup time expressed in ms, it depends on SoC.
+
+ atmel,trigger-edge-type:
+ $ref: '/schemas/types.yaml#/definitions/uint32'
+ description:
+ One of possible edge types for the ADTRG hardware trigger pin.
+ When the specific edge type is detected, the conversion will
+ start. Should be one of IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING
+ or IRQ_TYPE_EDGE_BOTH.
+ enum: [1, 2, 3]
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: rx
+
+ "#io-channel-cells":
+ const: 1
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - vref-supply
+ - vddana-supply
+ - atmel,min-sample-rate-hz
+ - atmel,max-sample-rate-hz
+ - atmel,startup-time-ms
+ - atmel,trigger-edge-type
+
+examples:
+ - |
+ #include <dt-bindings/dma/at91.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ adc@fc030000 {
+ compatible = "atmel,sama5d2-adc";
+ reg = <0xfc030000 0x100>;
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&adc_clk>;
+ clock-names = "adc_clk";
+ atmel,min-sample-rate-hz = <200000>;
+ atmel,max-sample-rate-hz = <20000000>;
+ atmel,startup-time-ms = <4>;
+ vddana-supply = <&vdd_3v3_lp_reg>;
+ vref-supply = <&vdd_3v3_lp_reg>;
+ atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
+ dma-names = "rx";
+ #io-channel-cells = <1>;
+ };
+ };
+...