diff options
Diffstat (limited to 'Documentation/devicetree/bindings/input')
3 files changed, 4 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt index c6cfe2e3ed41..9fc47b006fd1 100644 --- a/Documentation/devicetree/bindings/input/ads7846.txt +++ b/Documentation/devicetree/bindings/input/ads7846.txt @@ -29,7 +29,7 @@ Optional properties: ti,vref-delay-usecs vref supply delay in usecs, 0 for external vref (u16). ti,vref-mv The VREF voltage, in millivolts (u16). - Set to 0 to use internal refernce + Set to 0 to use internal references (ADS7846). ti,keep-vref-on set to keep vref on for differential measurements as well diff --git a/Documentation/devicetree/bindings/input/clps711x-keypad.txt b/Documentation/devicetree/bindings/input/clps711x-keypad.txt index e68d2bbc6c07..3eed8819d05d 100644 --- a/Documentation/devicetree/bindings/input/clps711x-keypad.txt +++ b/Documentation/devicetree/bindings/input/clps711x-keypad.txt @@ -1,7 +1,7 @@ * Cirrus Logic CLPS711X matrix keypad device tree bindings Required Properties: -- compatible: Shall contain "cirrus,clps711x-keypad". +- compatible: Shall contain "cirrus,ep7209-keypad". - row-gpios: List of GPIOs used as row lines. - poll-interval: Poll interval time in milliseconds. - linux,keymap: The definition can be found at @@ -12,7 +12,7 @@ Optional Properties: Example: keypad { - compatible = "cirrus,ep7312-keypad", "cirrus,clps711x-keypad"; + compatible = "cirrus,ep7312-keypad", "cirrus,ep7209-keypad"; autorepeat; poll-interval = <120>; row-gpios = <&porta 0 0>, diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt index cdf05f9b2329..abfcab3edc66 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt @@ -15,7 +15,7 @@ Optional properties: - fsl,pen-debounce-ns: Pen debounce time in nanoseconds. - fsl,pen-threshold: Pen-down threshold for the touchscreen. This is a value between 1 and 4096. It is the ratio between the internal reference voltage - and the measured voltage after the plate was precharged. Resistence between + and the measured voltage after the plate was precharged. Resistance between plates and therefore the voltage decreases with pressure so that a smaller value is equivalent to a higher pressure. - fsl,settling-time-ns: Settling time in nanoseconds. The settling time is before |