summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt')
-rw-r--r--Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt64
1 files changed, 64 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt b/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
new file mode 100644
index 000000000000..20236385f26e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
@@ -0,0 +1,64 @@
+* QCOM IOMMU
+
+The MSM IOMMU is an implementation compatible with the ARM VMSA short
+descriptor page tables. It provides address translation for bus masters outside
+of the CPU, each connected to the IOMMU through a port called micro-TLB.
+
+Required Properties:
+
+ - compatible: Must contain "qcom,apq8064-iommu".
+ - reg: Base address and size of the IOMMU registers.
+ - interrupts: Specifiers for the MMU fault interrupts. For instances that
+ support secure mode two interrupts must be specified, for non-secure and
+ secure mode, in that order. For instances that don't support secure mode a
+ single interrupt must be specified.
+ - #iommu-cells: The number of cells needed to specify the stream id. This
+ is always 1.
+ - qcom,ncb: The total number of context banks in the IOMMU.
+ - clocks : List of clocks to be used during SMMU register access. See
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+ for information about the format. For each clock specified
+ here, there must be a corresponding entry in clock-names
+ (see below).
+
+ - clock-names : List of clock names corresponding to the clocks specified in
+ the "clocks" property (above).
+ Should be "smmu_pclk" for specifying the interface clock
+ required for iommu's register accesses.
+ Should be "smmu_clk" for specifying the functional clock
+ required by iommu for bus accesses.
+
+Each bus master connected to an IOMMU must reference the IOMMU in its device
+node with the following property:
+
+ - iommus: A reference to the IOMMU in multiple cells. The first cell is a
+ phandle to the IOMMU and the second cell is the stream id.
+ A single master device can be connected to more than one iommu
+ and multiple contexts in each of the iommu. So multiple entries
+ are required to list all the iommus and the stream ids that the
+ master is connected to.
+
+Example: mdp iommu and its bus master
+
+ mdp_port0: iommu@7500000 {
+ compatible = "qcom,apq8064-iommu";
+ #iommu-cells = <1>;
+ clock-names =
+ "smmu_pclk",
+ "smmu_clk";
+ clocks =
+ <&mmcc SMMU_AHB_CLK>,
+ <&mmcc MDP_AXI_CLK>;
+ reg = <0x07500000 0x100000>;
+ interrupts =
+ <GIC_SPI 63 0>,
+ <GIC_SPI 64 0>;
+ qcom,ncb = <2>;
+ };
+
+ mdp: qcom,mdp@5100000 {
+ compatible = "qcom,mdp";
+ ...
+ iommus = <&mdp_port0 0
+ &mdp_port0 2>;
+ };