diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mfd')
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/max77620.txt | 9 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/max77650.txt | 46 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/stmfx.txt | 28 |
3 files changed, 82 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt index 9c16d51cc15b..5a642a51d58e 100644 --- a/Documentation/devicetree/bindings/mfd/max77620.txt +++ b/Documentation/devicetree/bindings/mfd/max77620.txt @@ -4,7 +4,8 @@ Required properties: ------------------- - compatible: Must be one of "maxim,max77620" - "maxim,max20024". + "maxim,max20024" + "maxim,max77663" - reg: I2C device address. Optional properties: @@ -17,6 +18,11 @@ Optional properties: IRQ numbers for different interrupt source of MAX77620 are defined at dt-bindings/mfd/max77620.h. +- system-power-controller: Indicates that this PMIC is controlling the + system power, see [1] for more details. + +[1] Documentation/devicetree/bindings/power/power-controller.txt + Optional subnodes and their properties: ======================================= @@ -105,6 +111,7 @@ Optional properties: Here supported time periods by device in microseconds are as follows: MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds. MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds. +MAX77663 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds. -maxim,power-ok-control: configure map power ok bit 1: Enables POK(Power OK) to control nRST_IO and GPIO1 diff --git a/Documentation/devicetree/bindings/mfd/max77650.txt b/Documentation/devicetree/bindings/mfd/max77650.txt new file mode 100644 index 000000000000..b529d8d19335 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/max77650.txt @@ -0,0 +1,46 @@ +MAX77650 ultra low-power PMIC from Maxim Integrated. + +Required properties: +------------------- +- compatible: Must be "maxim,max77650" +- reg: I2C device address. +- interrupts: The interrupt on the parent the controller is + connected to. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Must be <2>. + +- gpio-controller: Marks the device node as a gpio controller. +- #gpio-cells: Must be <2>. The first cell is the pin number and + the second cell is used to specify the gpio active + state. + +Optional properties: +-------------------- +gpio-line-names: Single string containing the name of the GPIO line. + +The GPIO-controller module is represented as part of the top-level PMIC +node. The device exposes a single GPIO line. + +For device-tree bindings of other sub-modules (regulator, power supply, +LEDs and onkey) refer to the binding documents under the respective +sub-system directories. + +For more details on GPIO bindings, please refer to the generic GPIO DT +binding document <devicetree/bindings/gpio/gpio.txt>. + +Example: +-------- + + pmic@48 { + compatible = "maxim,max77650"; + reg = <0x48>; + + interrupt-controller; + interrupt-parent = <&gpio2>; + #interrupt-cells = <2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "max77650-charger"; + }; diff --git a/Documentation/devicetree/bindings/mfd/stmfx.txt b/Documentation/devicetree/bindings/mfd/stmfx.txt new file mode 100644 index 000000000000..f0c2f7fcf5c7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stmfx.txt @@ -0,0 +1,28 @@ +STMicroelectonics Multi-Function eXpander (STMFX) Core bindings + +ST Multi-Function eXpander (STMFX) is a slave controller using I2C for +communication with the main MCU. Its main features are GPIO expansion, main +MCU IDD measurement (IDD is the amount of current that flows through VDD) and +resistive touchscreen controller. + +Required properties: +- compatible: should be "st,stmfx-0300". +- reg: I2C slave address of the device. +- interrupts: interrupt specifier triggered by MFX_IRQ_OUT signal. + Please refer to ../interrupt-controller/interrupt.txt + +Optional properties: +- drive-open-drain: configure MFX_IRQ_OUT as open drain. +- vdd-supply: phandle of the regulator supplying STMFX. + +Example: + + stmfx: stmfx@42 { + compatible = "st,stmfx-0300"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + vdd-supply = <&v3v3>; + }; + +Please refer to ../pinctrl/pinctrl-stmfx.txt for STMFX GPIO expander function bindings. |