summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mmc/arm,pl18x.yaml')
-rw-r--r--Documentation/devicetree/bindings/mmc/arm,pl18x.yaml203
1 files changed, 203 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
new file mode 100644
index 000000000000..eddc1f6bdbe5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -0,0 +1,203 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/arm,pl18x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PrimeCell MultiMedia Card Interface (MMCI) PL180 and PL181
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+description:
+ The ARM PrimeCells MMCI PL180 and PL181 provides an interface for
+ reading and writing to MultiMedia and SD cards alike. Over the years
+ vendors have use the VHDL code from ARM to create derivative MMC/SD/SDIO
+ host controllers with very similar characteristics.
+
+allOf:
+ - $ref: /schemas/arm/primecell.yaml#
+ - $ref: mmc-controller.yaml#
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - arm,pl180
+ - arm,pl181
+ - arm,pl18x
+ required:
+ - compatible
+
+properties:
+ compatible:
+ oneOf:
+ - description: The first version of the block, simply called
+ PL180 and found in the ARM Integrator IM/PD1 logic module.
+ items:
+ - const: arm,pl180
+ - const: arm,primecell
+ - description: The improved version of the block, found in the
+ ARM Versatile and later reference designs. Further revisions
+ exist but get detected at runtime by reading some magic numbers
+ in the PrimeCell ID registers.
+ items:
+ - const: arm,pl181
+ - const: arm,primecell
+ - description: Wildcard entry that will let the operating system
+ inspect the PrimeCell ID registers to determine which hardware
+ variant of PL180 or PL181 this is.
+ items:
+ - const: arm,pl18x
+ - const: arm,primecell
+
+ clocks:
+ description: One or two clocks, the "apb_pclk" and the "MCLK"
+ which is the core block clock. The names are not compulsory.
+ minItems: 1
+ maxItems: 2
+
+ power-domains: true
+
+ resets:
+ maxItems: 1
+
+ reg:
+ description: the MMIO memory window must be exactly 4KB (0x1000) and the
+ layout should provide the PrimeCell ID registers so that the device can
+ be discovered. On ST Micro variants, a second register window may be
+ defined if a delay block is present and used for tuning.
+
+ interrupts:
+ description: The first interrupt is the command interrupt and corresponds
+ to the event at the end of a command. The second interrupt is the
+ PIO (polled I/O) interrupt and occurs when the FIFO needs to be
+ emptied as part of a bulk read from the card. Some variants have these
+ two interrupts wired into the same line (logic OR) and in that case
+ only one interrupt may be provided.
+ minItems: 1
+ maxItems: 2
+
+ st,sig-dir-dat0:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: ST Micro-specific property, bus signal direction pins used for
+ DAT[0].
+
+ st,sig-dir-dat2:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: ST Micro-specific property, bus signal direction pins used for
+ DAT[2].
+
+ st,sig-dir-dat31:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: ST Micro-specific property, bus signal direction pins used for
+ DAT[3] and DAT[1].
+
+ st,sig-dir-dat74:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: ST Micro-specific property, bus signal direction pins used for
+ DAT[7] and DAT[4].
+
+ st,sig-dir-cmd:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: ST Micro-specific property, CMD signal direction used for
+ pin CMD.
+
+ st,sig-pin-fbclk:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: ST Micro-specific property, feedback clock FBCLK signal pin
+ in use.
+
+ st,sig-dir:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: ST Micro-specific property, signal direction polarity used for
+ pins CMD, DAT[0], DAT[1], DAT[2] and DAT[3].
+
+ st,neg-edge:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: ST Micro-specific property, data and command phase relation,
+ generated on the sd clock falling edge.
+
+ st,use-ckin:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: ST Micro-specific property, use CKIN pin from an external
+ driver to sample the receive data (for example with a voltage switch
+ transceiver).
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ mmc@5000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x5000 0x1000>;
+ interrupts-extended = <&vic 22 &sic 1>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "mclk", "apb_pclk";
+ };
+
+ mmc@80126000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80126000 0x1000>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma 29 0 0x2>, <&dma 29 0 0x0>;
+ dma-names = "rx", "tx";
+ clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
+ clock-names = "sdi", "apb_pclk";
+ max-frequency = <100000000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cd-gpios = <&gpio2 31 0x4>;
+ st,sig-dir-dat0;
+ st,sig-dir-dat2;
+ st,sig-dir-cmd;
+ st,sig-pin-fbclk;
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+ vqmmc-supply = <&vmmci>;
+ };
+
+ mmc@101f6000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x101f6000 0x1000>;
+ clocks = <&sdiclk>, <&pclksdi>;
+ clock-names = "mclk", "apb_pclk";
+ interrupt-parent = <&vica>;
+ interrupts = <22>;
+ max-frequency = <400000>;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ full-pwr-cycle;
+ st,sig-dir-dat0;
+ st,sig-dir-dat2;
+ st,sig-dir-dat31;
+ st,sig-dir-cmd;
+ st,sig-pin-fbclk;
+ vmmc-supply = <&vmmc_regulator>;
+ };
+
+ mmc@52007000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x10153180>;
+ reg = <0x52007000 0x1000>;
+ interrupts = <49>;
+ interrupt-names = "cmd_irq";
+ clocks = <&rcc 0>;
+ clock-names = "apb_pclk";
+ resets = <&rcc 1>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ };