diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt | 10 |
1 files changed, 8 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt index 29ea5853ca91..a5b940f18bf6 100644 --- a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt +++ b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt @@ -6,7 +6,10 @@ memory-controllers/ingenic,jz4780-nemc.txt), and thus NAND device nodes must be children of the NEMC node. Required NAND controller device properties: -- compatible: Should be set to "ingenic,jz4780-nand". +- compatible: Should be one of: + * ingenic,jz4740-nand + * ingenic,jz4725b-nand + * ingenic,jz4780-nand - reg: For each bank with a NAND chip attached, should specify a bank number, an offset of 0 and a size of 0x1000000 (i.e. the whole NEMC bank). @@ -72,7 +75,10 @@ NAND devices. The following is a description of the device properties for a BCH controller. Required BCH properties: -- compatible: Should be set to "ingenic,jz4780-bch". +- compatible: Should be one of: + * ingenic,jz4740-ecc + * ingenic,jz4725b-bch + * ingenic,jz4780-bch - reg: Should specify the BCH controller registers location and length. - clocks: Clock for the BCH controller. |