summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mtd')
-rw-r--r--Documentation/devicetree/bindings/mtd/cadence-quadspi.txt5
-rw-r--r--Documentation/devicetree/bindings/mtd/stm32-quadspi.txt43
2 files changed, 5 insertions, 43 deletions
diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
index 4345c3a6f530..945be7d5b236 100644
--- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
@@ -35,6 +35,9 @@ custom properties:
(qspi_n_ss_out).
- cdns,tslch-ns : Delay in nanoseconds between setting qspi_n_ss_out low
and first bit transfer.
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include either "qspi" and/or "qspi-ocp".
Example:
@@ -50,6 +53,8 @@ Example:
cdns,fifo-depth = <128>;
cdns,fifo-width = <4>;
cdns,trigger-address = <0x00000000>;
+ resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>;
+ reset-names = "qspi", "qspi-ocp";
flash0: n25q00@0 {
...
diff --git a/Documentation/devicetree/bindings/mtd/stm32-quadspi.txt b/Documentation/devicetree/bindings/mtd/stm32-quadspi.txt
deleted file mode 100644
index ddd18c135148..000000000000
--- a/Documentation/devicetree/bindings/mtd/stm32-quadspi.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-* STMicroelectronics Quad Serial Peripheral Interface(QuadSPI)
-
-Required properties:
-- compatible: should be "st,stm32f469-qspi"
-- reg: the first contains the register location and length.
- the second contains the memory mapping address and length
-- reg-names: should contain the reg names "qspi" "qspi_mm"
-- interrupts: should contain the interrupt for the device
-- clocks: the phandle of the clock needed by the QSPI controller
-- A pinctrl must be defined to set pins in mode of operation for QSPI transfer
-
-Optional properties:
-- resets: must contain the phandle to the reset controller.
-
-A spi flash must be a child of the nor_flash node and could have some
-properties. Also see jedec,spi-nor.txt.
-
-Required properties:
-- reg: chip-Select number (QSPI controller may connect 2 nor flashes)
-- spi-max-frequency: max frequency of spi bus
-
-Optional property:
-- spi-rx-bus-width: see ../spi/spi-bus.txt for the description
-
-Example:
-
-qspi: spi@a0001000 {
- compatible = "st,stm32f469-qspi";
- reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>;
- reg-names = "qspi", "qspi_mm";
- interrupts = <91>;
- resets = <&rcc STM32F4_AHB3_RESET(QSPI)>;
- clocks = <&rcc 0 STM32F4_AHB3_CLOCK(QSPI)>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_qspi0>;
-
- flash@0 {
- reg = <0>;
- spi-rx-bus-width = <4>;
- spi-max-frequency = <108000000>;
- ...
- };
-};