summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net/amd-xgbe.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/amd-xgbe.txt')
-rw-r--r--Documentation/devicetree/bindings/net/amd-xgbe.txt40
1 files changed, 35 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/net/amd-xgbe.txt b/Documentation/devicetree/bindings/net/amd-xgbe.txt
index 26efd526d16c..4bb624a73b54 100644
--- a/Documentation/devicetree/bindings/net/amd-xgbe.txt
+++ b/Documentation/devicetree/bindings/net/amd-xgbe.txt
@@ -5,12 +5,16 @@ Required properties:
- reg: Address and length of the register sets for the device
- MAC registers
- PCS registers
+ - SerDes Rx/Tx registers
+ - SerDes integration registers (1/2)
+ - SerDes integration registers (2/2)
- interrupt-parent: Should be the phandle for the interrupt controller
that services interrupts for this device
- interrupts: Should contain the amd-xgbe interrupt(s). The first interrupt
listed is required and is the general device interrupt. If the optional
amd,per-channel-interrupt property is specified, then one additional
- interrupt for each DMA channel supported by the device should be specified
+ interrupt for each DMA channel supported by the device should be specified.
+ The last interrupt listed should be the PCS auto-negotiation interrupt.
- clocks:
- DMA clock for the amd-xgbe device (used for calculating the
correct Rx interrupt watchdog timer value on a DMA channel
@@ -19,7 +23,6 @@ Required properties:
- clock-names: Should be the names of the clocks
- "dma_clk" for the DMA clock
- "ptp_clk" for the PTP clock
-- phy-handle: See ethernet.txt file in the same directory
- phy-mode: See ethernet.txt file in the same directory
Optional properties:
@@ -29,19 +32,46 @@ Optional properties:
- amd,per-channel-interrupt: Indicates that Rx and Tx complete will generate
a unique interrupt for each DMA channel - this requires an additional
interrupt be configured for each DMA channel
+- amd,speed-set: Speed capabilities of the device
+ 0 - 1GbE and 10GbE (default)
+ 1 - 2.5GbE and 10GbE
+
+The following optional properties are represented by an array with each
+value corresponding to a particular speed. The first array value represents
+the setting for the 1GbE speed, the second value for the 2.5GbE speed and
+the third value for the 10GbE speed. All three values are required if the
+property is used.
+- amd,serdes-blwc: Baseline wandering correction enablement
+ 0 - Off
+ 1 - On
+- amd,serdes-cdr-rate: CDR rate speed selection
+- amd,serdes-pq-skew: PQ (data sampling) skew
+- amd,serdes-tx-amp: TX amplitude boost
+- amd,serdes-dfe-tap-config: DFE taps available to run
+- amd,serdes-dfe-tap-enable: DFE taps to enable
Example:
xgbe@e0700000 {
compatible = "amd,xgbe-seattle-v1a";
reg = <0 0xe0700000 0 0x80000>,
- <0 0xe0780000 0 0x80000>;
+ <0 0xe0780000 0 0x80000>,
+ <0 0xe1240800 0 0x00400>,
+ <0 0xe1250000 0 0x00060>,
+ <0 0xe1250080 0 0x00004>;
interrupt-parent = <&gic>;
interrupts = <0 325 4>,
- <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>;
+ <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>,
+ <0 323 4>;
amd,per-channel-interrupt;
clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>;
clock-names = "dma_clk", "ptp_clk";
- phy-handle = <&phy>;
phy-mode = "xgmii";
mac-address = [ 02 a1 a2 a3 a4 a5 ];
+ amd,speed-set = <0>;
+ amd,serdes-blwc = <1>, <1>, <0>;
+ amd,serdes-cdr-rate = <2>, <2>, <7>;
+ amd,serdes-pq-skew = <10>, <10>, <30>;
+ amd,serdes-tx-amp = <15>, <15>, <10>;
+ amd,serdes-dfe-tap-config = <3>, <3>, <1>;
+ amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
};