diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
| -rw-r--r-- | Documentation/devicetree/bindings/net/dsa/qca8k.txt | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt index aeb206556f54..05a8ddfb5483 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt @@ -45,6 +45,16 @@ A CPU port node has the following optional node: Mostly used in qca8327 with CPU port 0 set to sgmii. - qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge. +- qca,sgmii-enable-pll : For SGMII CPU port, explicitly enable PLL, TX and RX + chain along with Signal Detection. + This should NOT be enabled for qca8327. If enabled with + qca8327 the sgmii port won't correctly init and an err + is printed. + This can be required for qca8337 switch with revision 2. + A warning is displayed when used with revision greater + 2. + With CPU port set to sgmii and qca8337 it is advised + to set this unless a communication problem is observed. For QCA8K the 'fixed-link' sub-node supports only the following properties: |