diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
-rw-r--r-- | Documentation/devicetree/bindings/net/fsl-fec.txt | 18 |
1 files changed, 18 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index 5b88fae0307d..59e449ba2557 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -5,6 +5,19 @@ Required properties: - reg : Address and length of the register set for the device - interrupts : Should contain fec interrupt - phy-mode : See ethernet.txt file in the same directory +- clock-name: Should be the names of the clocks + - "ipg", for MAC ipg_clk_s, ipg_clk_mac_s that are for register accessing + - "ahb", for MAC ipg_clk, ipg_clk_mac that are bus clock + - "ptp"(option), for IEEE1588 timer clock that requires the clock + - "enet_clk_ref"(option), for MAC transmit/receiver reference clock like + RGMII TXC clock or RMII reference clock. It depends on board design, + the clock is required if RGMII TXC and RMII reference clock source from + SOC internal PLL. + - "enet_out"(option), output clock for external device, like supply clock + for PHY. The clock is required if PHY clock source from SOC. + - "enet_2x_txclk"(option), for RGMII sampleing clock which fixed at 250Mhz. + The clock is required if SOC RGMII enable clock delay. +- clocks: Phandles to input clocks. Optional properties: - phy-supply : regulator that powers the Ethernet PHY. @@ -35,6 +48,11 @@ Optional properties: For imx6sx, "int0" handles all 3 queues and ENET_MII. "pps" is for the pulse per second interrupt associated with 1588 precision time protocol(PTP). +- fsl,wakeup_irq : The property defines the wakeup irq index in enet irq source. +- stop-mode : If present, indicates soc need to set gpr bit to request stop mode. +- mii-exclusive: If present, each MAC has their exclusive MDIO bus in current board + design, otherwise multiple MACs share one MDIO bus to reduce Pins utilize. + Optional subnodes: - mdio : specifies the mdio bus in the FEC, used as a container for phy nodes according to phy.txt in the same directory |