summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/powerpc')
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt53
1 files changed, 41 insertions, 12 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
index 5693877ab377..82dd5b65cf48 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
@@ -1,21 +1,20 @@
* Freescale MSI interrupt controller
Required properties:
-- compatible : compatible list, contains 2 entries,
- first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
- etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
- the parent type.
+- compatible : compatible list, may contain one or two entries
+ The first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
+ etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or
+ "fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic
+ version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is
+ provided to access these 16 registers, and compatible "fsl,mpic-msi-v4.3"
+ should be used. The first entry is optional; the second entry is
+ required.
- reg : It may contain one or two regions. The first region should contain
the address and the length of the shared message interrupt register set.
- The second region should contain the address of aliased MSIIR register for
- platforms that have such an alias.
-
-- msi-available-ranges: use <start count> style section to define which
- msi interrupt can be used in the 256 msi interrupts. This property is
- optional, without this, all the 256 MSI interrupts can be used.
- Each available range must begin and end on a multiple of 32 (i.e.
- no splitting an individual MSI register or the associated PIC interrupt).
+ The second region should contain the address of aliased MSIIR or MSIIR1
+ register for platforms that have such an alias, if using MSIIR1, the second
+ region must be added because different MSI group has different MSIIR1 offset.
- interrupts : each one of the interrupts here is one entry per 32 MSIs,
and routed to the host interrupt controller. the interrupts should
@@ -28,6 +27,14 @@ Required properties:
to MPIC.
Optional properties:
+- msi-available-ranges: use <start count> style section to define which
+ msi interrupt can be used in the 256 msi interrupts. This property is
+ optional, without this, all the MSI interrupts can be used.
+ Each available range must begin and end on a multiple of 32 (i.e.
+ no splitting an individual MSI register or the associated PIC interrupt).
+ MPIC v4.3 does not support this property because the 32 interrupts of an
+ individual register are not continuous when using MSIIR1.
+
- msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register
is used for MSI messaging. The address of MSIIR in PCI address space is
the MSI message address.
@@ -54,6 +61,28 @@ Example:
interrupt-parent = <&mpic>;
};
+ msi@41600 {
+ compatible = "fsl,mpic-msi-v4.3";
+ reg = <0x41600 0x200 0x44148 4>;
+ interrupts = <
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0
+ 0x100 0 0 0
+ 0x101 0 0 0
+ 0x102 0 0 0
+ 0x103 0 0 0
+ 0x104 0 0 0
+ 0x105 0 0 0
+ 0x106 0 0 0
+ 0x107 0 0 0>;
+ };
+
The Freescale hypervisor and msi-address-64
-------------------------------------------
Normally, PCI devices have access to all of CCSR via an ATMU mapping. The